Low-Power Optical Trapping of Nanoparticles and Proteins with Resonant Coaxial Nanoaperture Using 10 nm Gap

Influence of point mutations on PR65 conformational adaptability: Insights from molecular simulations and nanoaperture optical tweezers

PR65 is the HEAT repeat scaffold subunit of the heterotrimeric protein phosphatase 2A (PP2A) and an archetypal tandem repeat protein. Its conformational mechanics plays a crucial role in PP2A function by opening/closing substrate binding/catalysis interface. Using in silico saturation mutagenesis, we identified PR65 "hinge" residues whose substitutions could alter its conformational adaptability and thereby PP2A function, and selected six mutations that were verified to be expressed and soluble. Molecular simulations and nanoaperture optical tweezers revealed consistent results on the specific effects of the mutations on the structure and dynamics of PR65. Two mutants observed in simulations to stabilize extended/open conformations exhibited higher corner frequencies and lower translational scattering in experiments, indicating a shift toward extended conformations, whereas another displayed the opposite features, confirmed by both simulations and experiments. The study highlights the power of single-molecule nanoaperture-based tweezers integrated with in silico approaches for exploring the effect of mutations on protein structure and dynamics.

Plasmonic dielectric antennas for hybrid optical nanotweezing and optothermoelectric manipulation of single nanosized extracellular vesicles

This paper showcases an experimental demonstration of near-field optical trapping and dynamic manipulation of an individual extracellular vesicle. This is accomplished through the utilization of a plasmonic dielectric nanoantenna designed to support an optical anapole state-a non-radiating optical state resulting from the destructive interference between electric and toroidal dipoles in the far-field, leading to robust near-field enhancement. To further enhance the field intensity associated with the optical anapole state, a plasmonic mirror is incorporated, thereby boosting trapping capabilities. In addition to demonstrating near-field optical trapping, the study achieves dynamic manipulation of extracellular vesicles by harnessing the thermoelectric effect. This effect is induced in the presence of an ionic surfactant, cetyltrimethylammonium chloride (CTAC), combined with plasmonic heating. Furthermore, the thermoelectric effect improves trapping stability by introducing a wide and deep trapping potential. In summary, our hybrid plasmonic-dielectric trapping platform offers a versatile approach for actively transporting, stably trapping, and dynamically manipulating individual extracellular vesicles.

Thermometric Analysis of Nanoaperture-Trapped Erbium-Containing Nanocrystals

Temperature changes in plasmonic traps can affect biomolecules and quantum emitters; therefore, several works have sought out the capability of measuring the local temperature. Those works used ionic nanopore currents, fluorescence emission variations, and fluorescence-based diffusion tracking to measure the temperature dependence of shaped nanoapertures in metal films. Here, we make use of a stable erbium-containing NaYF4 nanocrystal that gives local temperature dependence while trapped in the nanoaperture hot spot. Ratiometric analysis of the emission at different wavelengths gives local temperature variation. Since the gold film dominates the thermal characteristic, we find that films of thickness 70, 100, and 130 nm give 0.64, 0.37, and 0.25 K/mW temperature change with laser power. Therefore, using thicker films can be effective in reducing the heating when it is not desired.

Efficient and Shape-Sensitive Manipulation of Nanoparticles by Quasi-Bound States in the Continuum Modes in All-Dielectric Metasurfaces

Current optical tweezering techniques are actively employed in the manipulation of nanoparticles, e.g., biomedical cells. However, there is still huge room for improving the efficiency of manipulating multiple nanoparticles of the same composition but different shapes. In this study, we designed an array of high-index all-dielectric disk antennas, each with an asymmetric open slot for such applications. Compared with the plasmonic counterparts, this all-dielectric metasurface has no dissipation loss and, thus, circumvents the Joule heating problem of plasmonic antennas. Furthermore, the asymmetry-induced excitation of quasi-bound states in continuum (QBIC) mode with a low-power intensity (1 mW/µm2) incidence imposes an optical gradient force of -0.31 pN on 8 nm radius nanospheres, which is four orders of magnitude stronger than that provided by the Fano resonance in plasmonic antenna arrays, and three orders of magnitude stronger than that by the Mie resonance in the same metasurface without any slot, respectively. This asymmetry also leads to the generation of large optical moments. At the QBIC resonance wavelength, a value of 88.3 pN-nm will act on the nanorods to generate a rotational force along the direction within the disk surface but perpendicular to the slot. This will allow only nanospheres but prevent the nanorods from accurately entering into the slots, realizing effective sieving between the nanoparticles of the two shapes.

Mirror-Enhanced Plasmonic Nanoaperture for Ultrahigh Optical Force Generation with Minimal Heat Generation

Double Nanohole Plasmonic Tweezers (DNH) have emerged as a powerful approach for confining light to sub-wavelength volume, enabling the trapping of nanoscale particles much smaller than the wavelength of light. However, to circumvent plasmonic heating effects, DNH tweezers are typically operated off-resonance, resulting in reduced optical forces and field enhancements. In this study, we introduce a novel DNH design with a reflector layer, enabling on-resonance illumination while minimizing plasmonic heating. This design efficiently dissipates heat and redistributes the electromagnetic hotspots, making them more accessible for trapping nanoscale particles and enhancing light-matter interactions. We also demonstrate low-power trapping and release of small extracellular vesicles. Our work opens new possibilities for trapping-assisted Surface Enhanced Raman Spectroscopy (SERS), plasmon-enhanced imaging, and single photon emission applications that demand strong light-matter interactions.

Self-induced back-action for aperture trapping: Bethe-Rayleigh theory

A dielectric (nano)particle can influence the local electromagnetic field and thereby alter its interaction with that field through the process of self-induced back-action. While this phenomenon is usually considered theoretically as a change in a cavity resonance frequency, such theoretical approaches are not as appropriate when considering systems away from resonance, such as with a subwavelength aperture in a metal film. Here we consider the interaction between an aperture, modelled with Bethe theory as a magnetic dipole, and a Rayleigh particle, modelled as an electric dipole. Using this magnetic dipole - electric dipole interaction, we quantify the self-induced back-action of the particle on the aperture transmission and the optical trapping potential. The model shows quantitative agreement with finite-difference time-domain simulations. This shows that the physics of self-induced back-action for an aperture and a nanoparticle can be understood in terms of dipole-dipole coupling.

Influence of Point Mutations on PR65 Conformational Adaptability: Insights from Nanoaperture Optical Tweezer Experiments and Molecular Simulations

PR65 is the HEAT-repeat scaffold subunit of the heterotrimeric protein phosphatase 2A (PP2A) and an archetypal tandem-repeat protein, forming a spring-like architecture. PR65 conformational mechanics play a crucial role in PP2A function by opening/closing the substrate-binding/catalysis interface. Using in-silico saturation mutagenesis we identified "hinge" residues of PR65, whose substitutions are predicted to restrict its conformational adaptability and thereby disrupt PP2A function. Molecular simulations revealed that a subset of hinge mutations stabilized the extended/open conformation, whereas another had the opposite effect. By trapping in nanoaperture optical tweezer, we characterized PR65 motion and showed that the former mutants exhibited higher corner frequencies and lower translational scattering, indicating a shift towards extended conformations, whereas the latter showed the opposite behavior. Thus, experiments confirm the conformations predicted computationally. The study highlights the utility of nanoaperture-based tweezers for exploring structure and dynamics, and the power of integrating this single-molecule method with in silico approaches.

Optical trapping based on microring resonators with a transverse slot structure

Over the past few decades, optical manipulation has emerged as a highly successful tool in various fields such as biology, micro/nanorobotics, and physics. Among the different techniques, the transverse slot optical waveguide has shown remarkable potential in enhancing the field and significantly improving optical trapping capabilities. Additionally, microring resonators have demonstrated the ability to enhance the field at specific resonance wavelengths, enabling the manipulation and capture of particles. In this study, we investigated the impact of the structure on nanoparticle capture by introducing a 50 nm transverse slot in a 5 µm microring resonator. Through the integration of a transverse slot in the microring resonator, we observed a substantial increase in the maximum bound optical power for a nanosphere with a refractive index of 1.6 and a diameter of 50 nm, reaching 3988.8 pN/W. This value is 2292 times higher than the maximum optical force in a straight waveguide and 2.266 times higher than the maximum optical force in a microring resonator. The proposed structure significantly enhances the optical trapping capabilities for nanoscale particles, thus paving the way for the development of advanced micro/nanomanipulation techniques.

Stable trapping of multiple proteins at physiological conditions using nanoscale chambers with macromolecular gates

The possibility to detect and analyze single or few biological molecules is very important for understanding interactions and reaction mechanisms. Ideally, the molecules should be confined to a nanoscale volume so that the observation time by optical methods can be extended. However, it has proven difficult to develop reliable, non-invasive trapping techniques for biomolecules under physiological conditions. Here we present a platform for long-term tether-free (solution phase) trapping of proteins without exposing them to any field gradient forces. We show that a responsive polymer brush can make solid state nanopores switch between a fully open and a fully closed state with respect to proteins, while always allowing the passage of solvent, ions and small molecules. This makes it possible to trap a very high number of proteins (500-1000) inside nanoscale chambers as small as one attoliter, reaching concentrations up to 60 gL-1. Our method is fully compatible with parallelization by imaging arrays of nanochambers. Additionally, we show that enzymatic cascade reactions can be performed with multiple native enzymes under full nanoscale confinement and steady supply of reactants. This platform will greatly extend the possibilities to optically analyze interactions involving multiple proteins, such as the dynamics of oligomerization events.

Scalable trapping of single nanosized extracellular vesicles using plasmonics

Heterogeneous nanoscale extracellular vesicles (EVs) are of significant interest for disease detection, monitoring, and therapeutics. However, trapping these nano-sized EVs using optical tweezers has been challenging due to their small size. Plasmon-enhanced optical trapping offers a solution. Nevertheless, existing plasmonic tweezers have limited throughput and can take tens of minutes for trapping for low particle concentrations. Here, we present an innovative approach called geometry-induced electrohydrodynamic tweezers (GET) that overcomes these limitations. GET generates multiple electrohydrodynamic potentials, allowing parallel transport and trapping of single EVs within seconds. By integrating nanoscale plasmonic cavities at the center of each GET trap, single EVs can be placed near plasmonic cavities, enabling instant plasmon-enhanced optical trapping upon laser illumination without detrimental heating effects. These non-invasive scalable hybrid nanotweezers open new horizons for high-throughput tether-free plasmon-enhanced single EV trapping and spectroscopy. Other potential areas of impact include nanoplastics characterization, and scalable hybrid integration for quantum photonics.

Laser shock forming of metal nanostructures with ultrafine gaps

The nanogaps between metal nanostructures are of great importance in nanotechnology. However, low cost and high precision fabrication of such nanogaps is still a difficult problem. In this paper, a method combining nanosecond laser shock and flexible metal film is proposed to form ultrafine gaps between metal nanostructures. The forming mechanism of ultrafine gaps between metal nanostructures was revealed by studying the superplastic deformation, spatiotemporal evolution of stress and strain, and cooperative deformation of the flexible metal thin film and metal nanostructures under laser shock. On the basis of the mechanism study, the effects of laser parameters and gold nanoparticle size on the forming of ultrafine gaps were further studied, so as to achieve high precision forming of ultrafine gaps (<10n m) between metal nanostructures.

Fringe Dielectrophoresis Nanoaperture Optical Trapping with Order of Magnitude Speed-Up for Unmodified Proteins

Single molecule analysis of proteins in an aqueous environment without modification (e.g., labels or tethers) elucidates their biophysics and interactions relevant to drug discovery. By combining fringe-field dielectrophoresis with nanoaperture optical tweezers we demonstrate an order of magnitude faster time-to-trap for proteins when the counter electrode is outside of the solution. When the counter electrode is inside the solution (the more common configuration found in the literature), electrophoresis speeds up the trapping of polystyrene nanospheres, but this was not effective for proteins in general. Since time-to-trap is critical for high-thoughput analysis, these findings are a major advancement to the nanoaperture optical trapping technique for protein analysis.

Dynamic Beam Steering and Focusing Graphene Metasurface Mirror Based on Fermi Energy Control

Beam steering technology is crucial for radio frequency and infrared telecommunication signal processing. Microelectromechanical systems (MEMS) are typically used for beam steering in infrared optics-based fields but have slow operational speeds. An alternative solution is to use tunable metasurfaces. Since graphene has gate-tunable optical properties, it is widely used in electrically tunable optical devices due to ultrathin physical thickness. We propose a tunable metasurface structure using graphene in a metal gap structure that can exhibit a fast-operating speed through bias control. The proposed structure can change beam steering and can focus immediately by controlling the Fermi energy distribution on the metasurface, thus overcoming the limitations of MEMS. The operation is numerically demonstrated through finite element method simulations.

Raman spectroscopy of optical-trapped single particle using bull's eye nanostructure

Surface-enhanced Raman spectroscopy (SERS) has enabled single nanoparticle Raman sensing with abundant applications in analytical chemistry, biomaterials, and environmental monitoring. Genuine single particle Raman sensing requires a cumbersome technique, such as atomic force microscopy (AFM) based tip-enhanced Raman spectroscopy; SERS-based single particle Raman sensing still collects an ensemble signal that samples, in principle, a number of particles. Here, we develop in situ Raman-coupled optical tweezers, based on a hybrid nanostructure consisting of a single bowtie aperture surrounded by bull's eye rings, to trap and excite a rhodamine-6G-dye-doped polystyrene sphere. We simulated a platform to ensure sufficient enhancement capability for both optical trapping and SERS of a single nanoparticle. Experiments with well-designed controls clearly attribute the Raman signal origin to a single 15-nm particle trapped at the center of a nanohole, and they also clarified the trapping and Raman enhancement role of the bull's eye rings. We claim Raman sensing of a smallest optically trapped particle.

Electromagnetic Forces and Torques: From Dielectrophoresis to Optical Tweezers

Electromagnetic forces and torques enable many key technologies, including optical tweezers or dielectrophoresis. Interestingly, both techniques rely on the same physical process: the interaction of an oscillating electric field with a particle of matter. This work provides a unified framework to understand this interaction both when considering fields oscillating at low frequencies─dielectrophoresis─and high frequencies─optical tweezers. We draw useful parallels between these two techniques, discuss the different and often unstated assumptions they are based upon, and illustrate key applications in the fields of physical and analytical chemistry, biosensing, and colloidal science.

Reflection mode optical trapping using polarization symmetry breaking from tilted double nanoholes

We demonstrate reflection geometry optical trapping using double nanoholes in a metal film. Symmetry breaking of the double nanohole allows for selecting the scattered trapping laser light of orthogonal polarization to the incident beam. This orthogonal polarization light shows a few percent increase when the nanoparticle (e.g., a 20 nm polystyrene particle, or protein bovine serum albumin) is trapped. The reflection geometry simplifies the optical setup and frees up one side of the trap, which has great potential for adding microfluidics to the other side or working with opaque or highly scattering samples.

Tunable optical traps over nonreciprocal surfaces

We propose engineering optical traps over plasmonic surfaces and precisely controlling the trap position with an external bias by inducing in-plane nonreciprocity on the surface. The platform employs an incident Gaussian beam to polarize targeted nanoparticles, and exploits the interplay between nonreciprocal and spin-orbit lateral recoil forces to construct stable optical traps and manipulate their position within the surface. To model this process, we develop a theoretical framework based on the Lorentz force combined with nonreciprocal Green's functions and apply it to calculate the trapping potential. Rooted on this formalism, we explore the exciting possibilities offered by graphene to engineer stable optical traps using low-power laser beams in the mid-IR and to manipulate the trap position in a continuous manner by applying a longitudinal drift bias. Nonreciprocal metasurfaces may open new possibilities to trap, assemble and manipulate nanoparticles and overcome many challenges faced by conventional optical tweezers while dealing with nanoscale objects.

Recent Progress on Optical Micro/Nanomanipulations: Structured Forces, Structured Particles, and Synergetic Applications

Optical manipulation has achieved great success in the fields of biology, micro/nano robotics and physical sciences in the past few decades. To date, the optical manipulation is still witnessing substantial progress powered by the growing accessibility of the complex light field, advanced nanofabrication and developed understandings of light-matter interactions. In this perspective, we highlight recent advancements of optical micro/nanomanipulations in cutting-edge applications, which can be fostered by structured optical forces enabled with diverse auxiliary multiphysical field/forces and structured particles. We conclude with our vision of ongoing and futuristic directions, including heat-avoided and heat-utilized manipulation, nonlinearity-mediated trapping and manipulation, metasurface/two-dimensional material based optical manipulation, as well as interface-based optical manipulation.

Kerr nonlinear medium assisted double-face absorbers for differential manipulation via an all-optical operation

Recently, light absorbers have attracted great attentions due to their promising in applications in functional optoelectronic devices. Herein, we theoretically propose and numerically demonstrate a new absorber platform, which consists of a 280-nm-thick photonic nonlinear waveguide film covering on the metal grating structure. Strong reflection inhibition and absorption enhancement is achieved in both the forward and backward directions, which indicates potential novel performances since the previous reports only achieved absorption in one side due to the using of opaque metal film substrate or the reflective mirror. The anti-reflection bands or the absorption peaks at the shorter and longer wavelength ranges are related to the excitation of the propagating surface plasmon resonance by the slit-assisted grating and the cavity mode by the slit in the metal film. Strong differential manipulation is realized for the double-face absorbers via the all-optical operation. Moreover, the operation wavelengths for the double-face light absorber can be modified strongly via using an asymmetric dielectric medium for the coating films. These new findings pave approaches for subtractive lightwave modulation technology, selective filtering, multiplex sensing and detection, etc.

Wavelength-multiplexed hook nanoantennas for machine learning enabled mid-infrared spectroscopy

Infrared (IR) plasmonic nanoantennas (PNAs) are powerful tools to identify molecules by the IR fingerprint absorption from plasmon-molecules interaction. However, the sensitivity and bandwidth of PNAs are limited by the small overlap between molecules and sensing hotspots and the sharp plasmonic resonance peaks. In addition to intuitive methods like enhancement of electric field of PNAs and enrichment of molecules on PNAs surfaces, we propose a loss engineering method to optimize damping rate by reducing radiative loss using hook nanoantennas (HNAs). Furthermore, with the spectral multiplexing of the HNAs from gradient dimension, the wavelength-multiplexed HNAs (WMHNAs) serve as ultrasensitive vibrational probes in a continuous ultra-broadband region (wavelengths from 6 μm to 9 μm). Leveraging the multi-dimensional features captured by WMHNA, we develop a machine learning method to extract complementary physical and chemical information from molecules. The proof-of-concept demonstration of molecular recognition from mixed alcohols (methanol, ethanol, and isopropanol) shows 100% identification accuracy from the microfluidic integrated WMHNAs. Our work brings another degree of freedom to optimize PNAs towards small-volume, real-time, label-free molecular recognition from various species in low concentrations for chemical and biological diagnostics.

Infrared spectroscopy with plasmonic nanoantennas is limited by small overlap between molecules and hot spots, and sharp resonance peaks. The authors demonstrate spectral multiplexing of hook nanoantennas with gradient dimensions as ultrasensitive vibrational probes in a continuous ultra-broadband region and utilize machine learning for enhanced sensing performance.

Nanoscale Optical Trapping by Means of Dielectric Bowtie

Plasmonic and dielectric tweezers represent a common paradigm for an innovative and efficient optical trapping at the micro/nanoscale. Plasmonic configurations provide subwavelength mode confinement, resulting in very high optical forces, at the expense of a higher thermal effect, that could undermine the biological sample under test. On the contrary, dielectric configurations show limited optical forces values but overcome the thermal challenge. Achieving efficient optical trapping without affecting the sample temperature is still demanding. Here, we propose the design of a silicon (Si)-based dielectric nanobowtie dimer, made by two tip-to-tip triangle semiconductor elements. The combination of the conservation of the normal component of the electric displacement and the tangential component of the electric field, with a consequent large energy field confinement in the trapping site, ensures optical forces of about 27 fN with a power of 6 mW/µm2. The trapping of a virus with a diameter of 100 nm is demonstrated with numerical simulations, calculating a stability S = 1, and a stiffness k = 0.33 fN/nm, within a footprint of 0.96 µm2, preserving the temperature of the sample (temperature variation of 0.3 K).

Label-Free Optical Analysis of Biomolecules in Solid-State Nanopores: Toward Single-Molecule Protein Sequencing

Sequence identification of peptides and proteins is central to proteomics. Protein sequencing is mainly conducted by insensitive mass spectroscopy because proteins cannot be amplified, which hampers applications such as single-cell proteomics and precision medicine. The commercial success of portable nanopore sequencers for single DNA molecules has inspired extensive research and development of single-molecule techniques for protein sequencing. Among them, three challenges remain: (1) discrimination of the 20 amino acids as building blocks of proteins; (2) unfolding proteins; and (3) controlling the motion of proteins with nonuniformly charged sequences. In this context, the emergence of label-free optical analysis techniques for single amino acids and peptides by solid-state nanopores shows promise for addressing the first challenge. In this Perspective, we first discuss the current challenges of single-molecule fluorescence detection and nanopore resistive pulse sensing in a protein sequencing. Then, label-free optical methods are described to show how they address the single-amino-acid identification within single peptides. They include localized surface plasmon resonance detection and surface-enhanced Raman spectroscopy on plasmonic nanopores. Notably, we report new data to show the ability of plasmon-enhanced Raman scattering to record and discriminate the 20 amino acids at a single-molecule level. In addition, we discuss briefly the manipulation of molecule translocation and liquid flow in plasmonic nanopores for controlling molecule movement to allow high-resolution reading of protein sequences. We envision that a combination of Raman spectroscopy with plasmonic nanopores can succeed in single-molecule protein sequencing in a label-free way.

Accessible high-performance double nanohole tweezers

Nanohole optical tweezers have been used by several groups to trap and analyze proteins. In this work, we demonstrate that it is possible to create high-performance double nanohole (DNH) substrates for trapping proteins without the need for any top-down approaches (such as electron microscopy or focused-ion beam milling). Using polarization analysis, we identify DNHs as well as determine their orientation and then use them for trapping. We are also able to identify other hole configurations, such as single, trimers and other clusters. We explore changing the substrate from glass to polyvinyl chloride to enhance trapping ability, showing 7 times lower minimum trapping power, which we believe is due to reduced surface repulsion. Finally, we present tape exfoliation as a means to expose DNHs without damaging sonication or chemical methods. Overall, these approaches make high quality optical trapping using DNH structures accessible to a broad scientific community.

Colorimetry /SERS dual-sensor of H2O2 constructed via TMB-Fe3O4@ AuNPs

Hydrogen peroxide (H₂O₂) detection with high sensitivity plays an important role in biomedical research and food engineering. By combining colorimetry and surface enhanced Raman spectroscopy (SERS), we synthetize a novel H₂O₂ dual-sensor constructed via TMB-Fe₃O₄@AuNPs. In the presence of H₂O₂, the peroxide model enzyme might catalyze the oxidation of 3,3',5,5'- tetramethylbenzidine (TMB) as blue charge transfer complex (CTC) for colorimetry, and then facilitate the sensitivity improvement of SERS detection. The achieved results show that in colorimetry, the linear range is from 40 μM to 5.5 mM with the detection limit of 11.1 μM; in SERS detection, the linear range is from 2 nM to 1 μM with the detection limit of 0.275 nM. Clearly, this mutual reference strategy improves both the detection limit of colorimetry and the sensitivity of SERS detection. Moreover, this colorimetry/SERS dual-sensor constructed via TMB-Fe₃O₄@AuNPs is successfully applied to the H₂O₂ detection in plasma and milk, indicating the excellent performance and flexibility.

Optical trapping using transverse electromagnetic (TEM)-like mode in a coaxial nanowaveguide

Optical traps have emerged as powerful tools for immobilizing and manipulating small particles in three dimensions. Fiber-based optical traps (FOTs) significantly simplify optical setup by creating trapping centers with single or multiple pieces of optical fibers. In addition, they inherit the flexibility and robustness of fiber-optic systems. However, trapping 10-nm-diameter nanoparticles (NPs) using FOTs remains challenging. In this study, we model a coaxial waveguide that works in the optical regime and supports a transverse electromagnetic (TEM)-like mode for NP trapping. Single NPs at waveguide front-end break the symmetry of TEM-like guided mode and lead to high transmission efficiency at far-field, thereby strongly altering light momentum and inducing a large-scale back-action on the particle. We demonstrate, via finite-difference time-domain (FDTD) simulations, that this FOT allows for trapping single 10-nm-diameter NPs at low power.

The Rise of the OM-LoC: Opto-Microfluidic Enabled Lab-on-Chip

The integration of optical circuits with microfluidic lab-on-chip (LoC) devices has resulted in a new era of potential in terms of both sample manipulation and detection at the micro-scale. On-chip optical components increase both control and analytical capabilities while reducing reliance on expensive laboratory photonic equipment that has limited microfluidic development. Notably, in-situ LoC devices for bio-chemical applications such as diagnostics and environmental monitoring could provide great value as low-cost, portable and highly sensitive systems. Multiple challenges remain however due to the complexity involved with combining photonics with micro-fabricated systems. Here, we aim to highlight the progress that optical on-chip systems have made in recent years regarding the main LoC applications: (1) sample manipulation and (2) detection. At the same time, we aim to address the constraints that limit industrial scaling of this technology. Through evaluating various fabrication methods, material choices and novel approaches of optic and fluidic integration, we aim to illustrate how optic-enabled LoC approaches are providing new possibilities for both sample analysis and manipulation.

Nano-optical trapping using an all-dielectric optical fiber supporting a TEM-like mode

Fiber optical tweezers benefit from compact structures and compatibility with fiber optic technology, however, trapping of nano-objects are rarely demonstrated. Here, we predict stable optical trapping of a 30 nm polystyrene particle using an all-dielectric coaxial optical fiber supporting an axisymmetric TEM-like mode. We demonstrate, via comprehensive finite-difference time-domain simulations, that the trapping behavior arises from a significant shift of the fiber-end-fire radiation directivity originated from the nanoparticle-induced symmetry breaking, rather than the gradient force which assumes an invariant optical field. Fabrication of the fiber involved is entirely feasible with existing techniques, such as thermal-drawn and electrospinning, and therefore can be mass-produced.

Toward Lossless Infrared Optical Trapping of Small Nanoparticles Using Nonradiative Anapole Modes

A challenge in plasmonic trapping of small nanoparticles is the heating due to the Joule effect of metallic components. This heating can be avoided with electromagnetic field confinement in high-refractive-index materials, but nanoparticle trapping is difficult because the electromagnetic fields are mostly confined inside the dielectric nanostructures. Herein, we present the design of an all-dielectric platform to capture small dielectric nanoparticles without heating the nanostructure. It consists of a Si nanodisk engineered to exhibit the second-order anapole mode at the infrared regime (λ=980  nm), where Si has negligible losses, with a slot at the center. A strong electromagnetic hot spot is created, thus allowing us to capture nanoparticles as small as 20 nm. The numerical calculations indicate that optical trapping in these all-dielectric nanostructures occurs without heating only in the infrared, since for visible wavelengths the heating levels are similar to those in plasmonic nanostructures.

Allosteric Switching of Calmodulin in a Mycobacterium smegmatis porin A (MspA) Nanopore-Trap

Recent developments concerning large protein nanopores suggest a new approach to structure profiling of native folded proteins. In this work, the large vestibule of Mycobacterium smegmatis porin A (MspA) and calmodulin (CaM), a Ca²⁺ -binding protein, were used in the direct observation of the protein structure. Three conformers, including the Ca²⁺ -free, Ca²⁺ -bound, and target peptide-bound states of CaM, were unambiguously distinguished. A disease related mutant, CaM D129G was also discriminated by MspA, revealing how a single amino acid replacement can interfere with the Ca²⁺ -binding capacity of the whole protein. The binding capacity and aggregation effect of CaM induced by different ions (Mg²⁺ /Sr²⁺ /Ba²⁺ /Ca²⁺ /Pb²⁺ /Tb³⁺ ) were also investigated and the stability of MspA in extreme conditions was evaluated. This work demonstrates the most systematic single-molecule investigation of different allosteric conformers of CaM, acknowledging the high sensing resolution offered by the MspA nanopore trap.

Plasmonic metal nanostructures with extremely small features: new effects, fabrication and applications

Surface plasmons in metals promise many fascinating properties and applications in optics, sensing, photonics and nonlinear fields. Plasmonic nanostructures with extremely small features especially demonstrate amazing new effects as the feature sizes scale down to the sub-nanometer scale, such as quantum size effects, quantum tunneling, spill-out of electrons and nonlocal states etc. The unusual physical, optical and photo-electronic properties observed in metallic structures with extreme feature sizes enable their unique applications in electromagnetic field focusing, spectra enhancing, imaging, quantum photonics, etc. In this review, we focus on the new effects, fabrication and applications of plasmonic metal nanostructures with extremely small features. For simplicity and consistency, we will focus our topic on the plasmonic metal nanostructures with feature sizes of sub-nanometers. Subsequently, we discussed four main and typical plasmonic metal nanostructures with extremely small features, including: (1) ultra-sharp plasmonic metal nanotips; (2) ultra-thin plasmonic metal films; (3) ultra-small plasmonic metal particles and (4) ultra-small plasmonic metal nanogaps. Additionally, the corresponding fascinating new effects (quantum nonlinear, non-locality, quantum size effect and quantum tunneling), applications (spectral enhancement, high-order harmonic wave generation, sensing and terahertz wave detection) and reliable fabrication methods will also be discussed. We end the discussion with a brief summary and outlook of the main challenges and possible breakthroughs in the field. We hope our discussion can inspire the broader design, fabrication and application of plasmonic metal nanostructures with extremely small feature sizes in the future.

Nano-Optical Tweezers: Methods and Applications for Trapping Single Molecules and Nanoparticles

Optical tweezers were developed in 1970 by Arthur Ashkin as a tool for the manipulation of micron-sized particles. Ashkin's original design was then adapted for a variety of purposes, such as trapping and manipulation of biological materials^[1] and the laser cooling of atoms.^[2,3] More recent development has led to nano-optical tweezers, for trapping particles on the scale of only a few nanometers, and holographic tweezers, which allow for dynamic control of multiple traps in real-time. These alternatives to conventional optical tweezers have made it possible to trap single molecules and to perform a variety of studies on them. Presented here is a review of recent developments in nano-optical tweezers and their current and future applications.

Plasmonic elliptical nanoholes for chiroptical analysis and enantioselective optical trapping

A simple yet effective achiral platform using elliptical nanoholes for chiroptical analysis is demonstrated. Under linearly polarized excitation, an elliptical nanohole in a thin gold film can generate a localized chiral optical field for chiroptical analysis and simultaneously serve as a near-field optical trap to capture dielectric and plasmonic nanospheres. In particular, the trapping potential is enantioselective for dielectric nanospheres, i.e., the hole traps or repels the dielectric nanoparticles depending on the sample chirality. For plasmonic nanospheres, the trapping potential well is much deeper than that for dielectric particles, rendering the enantioselectivity less pronounced. This platform is suitable for chiral analysis with nanoparticle-based solid-state extraction and pre-concentration. Compared to plasmonic chiroptical sensing using chiral structures or circularly polarized light, elliptical nanoholes are a simple and effective platform, which is expected to have a relatively low background because chiroptical noise from the structure or chiral species outside the nanohole is minimized. The use of linearly polarized excitation also makes the platform easily compatible with a commercial optical microscope.

Plasmonic Optical Tweezers for Particle Manipulation: Principles, Methods, and Applications

Inspired by the idea of combining conventional optical tweezers with plasmonic nanostructures, a technique named plasmonic optical tweezers (POT) has been widely explored from fundamental principles to applications. With the ability to break the diffraction barrier and enhance the localized electromagnetic field, POT techniques are especially effective for high spatial-resolution manipulation of nanoscale or even subnanoscale objects, from small bioparticles to atoms. In addition, POT can be easily integrated with other techniques such as lab-on-chip devices, which results in a very promising alternative technique for high-throughput single-bioparticle sensing or imaging. Despite its label-free, high-precision, and high-spatial-resolution nature, it also suffers from some limitations. One of the main obstacles is that the plasmonic nanostructures are located over the surfaces of a substrate, which makes the manipulation of bioparticles turn from a three-dimensional problem to a nearly two-dimensional problem. Meanwhile, the operation zone is limited to a predefined area. Therefore, the target objects must be delivered to the operation zone near the plasmonic structures. This review summarizes the state-of-the-art target delivery methods for the POT-based particle manipulating technique, along with its applications in single-bioparticle analysis/imaging, high-throughput bioparticle purifying, and single-atom manipulation. Future developmental perspectives of POT techniques are also discussed.

Review of optical sensing and manipulation of chiral molecules and nanostructures with the focus on plasmonic enhancements [Invited]

Chiral molecules are ubiquitous in nature; many important synthetic chemicals and drugs are chiral. Detecting chiral molecules and separating the enantiomers is difficult because their physiochemical properties can be very similar. Here we review the optical approaches that are emerging for detecting and manipulating chiral molecules and chiral nanostructures. Our review focuses on the methods that have used plasmonics to enhance the chiroptical response. We also review the fabrication and assembly of (dynamic) chiral plasmonic nanosystems in this context.

Plasmonic tweezers: for nanoscale optical trapping and beyond

Optical tweezers and associated manipulation tools in the far field have had a major impact on scientific and engineering research by offering precise manipulation of small objects. More recently, the possibility of performing manipulation with surface plasmons has opened opportunities not feasible with conventional far-field optical methods. The use of surface plasmon techniques enables excitation of hotspots much smaller than the free-space wavelength; with this confinement, the plasmonic field facilitates trapping of various nanostructures and materials with higher precision. The successful manipulation of small particles has fostered numerous and expanding applications. In this paper, we review the principles of and developments in plasmonic tweezers techniques, including both nanostructure-assisted platforms and structureless systems. Construction methods and evaluation criteria of the techniques are presented, aiming to provide a guide for the design and optimization of the systems. The most common novel applications of plasmonic tweezers, namely, sorting and transport, sensing and imaging, and especially those in a biological context, are critically discussed. Finally, we consider the future of the development and new potential applications of this technique and discuss prospects for its impact on science.

Dynamic electrical measurement of biomolecule behavior via plasmonically-excited nanogap fabricated by electromigration

The dynamic motion of DNA oligomers at the nanoscale gap between nanoelectrodes is measured under plasmonic excitation using laser irradiation. The use of a nanogap enables highly sensitive detection of individual molecules using an electrical readout or an optical readout such as Raman spectroscopy. However, the target molecule must reach the nanogap in order to be detected. This study focuses on the use of plasmonic excitation to trap molecules at the nanogap surface. The nanogap electrode is fabricated by electromigration and is, therefore, a much smaller nanogap than the top-down fabrication in the conventional plasmonic trapping studies. To demonstrate the individual molecule detection and to investigate the molecular behavior, the molecules are monitored using an electrical readout under a bias voltage instead of an optical readout used in the conventional studies. The conductance change due to DNA oligomer penetration to the nanogap is observed with the irradiated light intensity of over 1.23 mW. The single-molecule detection is confirmed irradiating the laser to the nanogap. The results suggest that DNA oligomers are spontaneously attracted and concentrated to the nanogap corresponding to the detection point, resulting in high detection probability and sensitivity.

Plasmonic nano-optical trap stiffness measurements and design optimization

Plasmonic nano-optical tweezers enable the non-invasive manipulation of nano-objects under low illumination intensities, and have become a powerful tool for nanotechnology and biophysics. However, measuring the trap stiffness of nanotweezers remains a complicated task, which hinders the development of plasmonic trapping. Here, we describe an experimental method to measure the trap stiffness based on the temporal correlation of the fluorescence from the trapped object. The method is applied to characterize the trap stiffness in different double nanohole apertures and explore the influence of their design parameters in relationship with numerical simulations. Optimizing the double nanohole design achieves a trap stiffness 10× larger than the previous state-of-the-art. The experimental method and the design guidelines discussed here offer a simple and efficient way to improve the performance of nano-optical tweezers.

Nano-slit assisted high-Q photonic resonant perfect absorbers

We propose and demonstrate a new kind of resonant absorber via introducing the nano-slit into a photonic film. The combination of the nano-slit cavity and the photonic waveguide provides a powerful way to manipulate the light behaviors including the spectral Q factors and the absorption efficiency. Ultra-sharp resonant absorption with the Q factors up to 579.5 is achieved, suggesting an enhancement of ∼6100% in contrast to that of the metal-dielectric flat film structure. Moreover, in comparison with the low absorption of 5.4% for the system without nano-slit, the spectral absorption is up to ∼96.6% for the nano-slit assisted photonic absorber. The high Q resonant absorption can be further manipulated via the structural parameters and the polarization state. The operation wavelengths can be tuned by the lattice constant. As the nano-slit introduced into the dielectric film, strong optical field confinement effects can be achieved by the cavity resonance via the nano-slit itself, and the guided resonant effect in the photonic waveguide cavity formed by the adjacent nano-slits. Otherwise, the photonic-plasmonic hybridization effect is simultaneously excited between the dielectric guided cavity layer and the metal substrate. These findings can be extended to other photonic nano-cavity systems and pave new insights into the high Q nano-optics devices.

Quantifying the Role of the Surfactant and the Thermophoretic Force in Plasmonic Nano-optical Trapping

Plasmonic nanotweezers use intense electric field gradients to generate optical forces able to trap nano-objects in liquids. However, part of the incident light is absorbed into the metal, and a supplementary thermophoretic force acting on the nano-object arises from the resulting temperature gradient. Plasmonic nanotweezers thus face the challenge of disentangling the intricate contributions of the optical and thermophoretic forces. Here, we show that commonly added surfactants can unexpectedly impact the trap performance by acting on the thermophilic or thermophobic response of the nano-object. Using different surfactants in double nanohole plasmonic trapping experiments, we measure and compare the contributions of the thermophoretic and the optical forces, evidencing a trap stiffness 20× higher using sodium dodecyl sulfate (SDS) as compared to Triton X-100. This work uncovers an important mechanism in plasmonic nanotweezers and provides guidelines to control and optimize the trap performance for different plasmonic designs.

Optical Manipulation of Lanthanide-Doped Nanoparticles: How to Overcome Their Limitations

Since Ashkin's pioneering work, optical tweezers have become an essential tool to immobilize and manipulate microscale and nanoscale objects. The use of optical tweezers is key for a variety of applications, including single-molecule spectroscopy, colloidal dynamics, tailored particle assembly, protein isolation, high-resolution surface studies, controlled investigation of biological processes, and surface-enhanced spectroscopy. In recent years, optical trapping of individual sub-100-nm objects has got the attention of the scientific community. In particular, the three-dimensional manipulation of single lanthanide-doped luminescent nanoparticles is of great interest due to the sensitivity of their luminescent properties to environmental conditions. Nevertheless, it is really challenging to trap and manipulate single lanthanide-doped nanoparticles due to the weak optical forces achieved with conventional optical trapping strategies. This limitation is caused, firstly, by the diffraction limit in the focusing of the trapping light and, secondly, by the Brownian motion of the trapped object. In this work, we summarize recent experimental approaches to increase the optical forces in the manipulation of lanthanide-doped nanoparticles, focusing our attention on their surface modification and providing a critical review of the state of the art and future prospects.

Stand-off trapping and manipulation of sub-10 nm objects and biomolecules using opto-thermo-electrohydrodynamic tweezers

Optical tweezers have emerged as a powerful tool for the non-invasive trapping and manipulation of colloidal particles and biological cells^1,2. However, the diffraction limit precludes the low-power trapping of nanometre-scale objects. Substantially increasing the laser power can provide enough trapping potential depth to trap nanoscale objects. Unfortunately, the substantial optical intensity required causes photo-toxicity and thermal stress in the trapped biological specimens³. Low-power near-field nano-optical tweezers comprising plasmonic nanoantennas and photonic crystal cavities have been explored for stable nanoscale object trapping^4-13. However, the demonstrated approaches still require that the object is trapped at the high-light-intensity region. We report a new kind of optically controlled nanotweezers, called opto-thermo-electrohydrodynamic tweezers, that enable the trapping and dynamic manipulation of nanometre-scale objects at locations that are several micrometres away from the high-intensity laser focus. At the trapping locations, the nanoscale objects experience both negligible photothermal heating and light intensity. Opto-thermo-electrohydrodynamic tweezers employ a finite array of plasmonic nanoholes illuminated with light and an applied a.c. electric field to create the spatially varying electrohydrodynamic potential that can rapidly trap sub-10 nm biomolecules at femtomolar concentrations on demand. This non-invasive optical nanotweezing approach is expected to open new opportunities in nanoscience and life science by offering an unprecedented level of control of nano-sized objects, including photo-sensitive biological molecules.

Opto-Thermoelectric Tweezers: Principles and Applications

Opto-thermoelectric tweezers (OTET), which exploit the thermophoretic matter migration under a light-directed temperature field, present a new platform for manipulating colloidal particles with a wide range of materials, sizes, and shapes. Taking advantage of the entropically favorable photon-phonon conversion in light-absorbing materials and spatial separation of dissolved ions in electrolytes, OTET can manipulate the particles in a low-power and high-resolution fashion. In this mini-review, we summarize the concept, working principles, and applications of OTET. Recent developments of OTET in three-dimensional manipulation and parallel trapping of particles are discussed thoroughly. We further present their initial applications in particle filtration and biological studies. With their future development, OTET are expected to find a wide range of applications in life sciences, nanomedicine, colloidal sciences, photonics, and materials sciences.

Nanoparticle trapping and manipulation using a silicon nanotrimer with polarized light

Optical tweezers based on plasmonics experience a tremendous development on manipulating nanoparticles but are unable to avoid the problem of Joule heating. In this Letter, we report a silicon nanotrimer to optically trap and manipulate nanoparticles with negligible local heating. The optical forces and trapping potential of the nanotrimer are investigated using the finite-difference time-domain method. The results indicate that the trapping position can be shifted by tuning the polarization of the incident light. Furthermore, the silicon nanotrimer enables simultaneous trapping of multiple nanoparticles using circularly polarized illumination. Our work provides a promising building block for an integrated all-dielectric platform to realize optically driven nanomanipulation, which offers new possibilities for on-chip optical applications.

Spacer-Defined Intrinsic Multiple Patterning

Periodic nanotube arrays render enhanced functional properties through their interaction with light and matter, but to reach optimal performance for technologically prominent applications, such as wettability or photonics, structural fine-tuning is essential. Nonetheless, a universal and scalable method providing independent dimension control, high aspect ratios, and the prospect of further structural complexity remains unachieved. Here, we answer this need through an atomic layer deposition (ALD)-enabled multiple patterning. Unlike previous methods, the ALD-deposited spacer is applied directly on the prepatterned target substrate material, serving as an etching mask to generate a multitude of tailored nanotubes. By concept iteration, we further realize concentric and/or binary nanoarrays in a number of industrially important materials such as silicon, glass, and polymers. To demonstrate the achieved quality and applicability of the structures, we probe how nanotube fine-tuning induces broadband antireflection and present a surface boasting extremely low reflectance of <1% across the wavelength range of 300-1050 nm.

Optical trapping of single nano-size particles using a plasmonic nanocavity

Trapping and manipulating micro-size particles using optical tweezers has contributed to many breakthroughs in biology, materials science, and colloidal physics. However, it remains challenging to extend this technique to a few nanometers particles owing to the diffraction limit and the considerable Brownian motion of trapped nanoparticles. In this work, a nanometric optical tweezer is proposed by using a plasmonic nanocavity composed of the closely spaced silver coated fiber tip and gold film. It is found that the radial vector mode can produce a nano-sized near field with the electric-field intensity enhancement factor over 103through exciting the plasmon gap mode in the nanocavity. By employing the Maxwell stress tensor formalism, we theoretically demonstrate that this nano-sized near field results in a sharp quasi-harmonic potential well, capable of stably trapping 2 nm quantum dots beneath the tip apex with the laser power as low as 3.7 mW. Further analysis reveals that our nanotweezers can stably work in a wide range of particle-to-tip distances, gap sizes, and operation wavelengths. We envision that our proposed nanometric optical tweezers could be compatible with the tip-enhanced Raman spectroscopy to allow simultaneously manipulating and characterizing single nanoparticles as well as nanoparticle interactions with high sensitivity.

Next-Generation Optical Nanotweezers for Dynamic Manipulation: From Surface to Bulk

Optical traps based on strongly confined electromagnetic fields at metal-dielectric interfaces are far more efficient than conventional optical tweezers. Specifically, these near-field nanotweezers allow the trapping of smaller particles at lower optical intensities, which can impact diverse research fields ranging from soft condensed matter physics to materials science and biology. A major thrust in the past decade has been focused on extending the capabilities of plasmonically enhanced nanotweezers beyond diffusion-limited trapping on surfaces such as to achieve dynamic control in the bulk of fluidic environments. Here, we review the recent efforts in optical nanotweezers, especially those involving hybrid forcing schemes, covering both surface and bulk-based techniques. We summarize the important capabilities demonstrated with this promising approach, with niche applications in reconfigurable nanopatterning and on-chip assembly as well as in sorting and separating colloidal nanoparticles.

Fano-Resonant, Asymmetric, Metamaterial-Assisted Tweezers for Single Nanoparticle Trapping

Plasmonic nanostructures overcome Abbe's diffraction limit to create strong gradient electric fields, enabling efficient optical trapping of nanoparticles. However, it remains challenging to achieve stable trapping with low incident laser intensity. Here, we demonstrate Fano resonance-assisted plasmonic optical tweezers for single nanoparticle trapping in an array of asymmetrical split nanoapertures on a 50 nm gold thin film. A large normalized trap stiffness of 8.65 fN/nm/mW for 20 nm polystyrene particles at a near-resonance trapping wavelength of 930 nm was achieved. The trap stiffness on-resonance is enhanced by a factor of 63 compared to that of off-resonance due to the ultrasmall mode volume, enabling large near-field strengths and a cavity effect contribution. These results facilitate trapping with low incident laser intensity, thereby providing new options for studying transition paths of single molecules such as proteins.

Subwavelength optical trapping and transporting using a Bloch mode

Multi-functional optical manipulations, including optical trapping and transporting of subwavelength particles, are proposed using the Bloch modes in a dielectric photonic structure. We show that the Bloch modes in a periodic structure can generate a series of subwavelength trapping wells that are addressable by tuning the incident wavelength. This feature enables efficient optical trapping and transportation in a peristaltic way. Since we are using the guiding Bloch mode in a dielectric structure, rather than using plasmonic or dielectric resonant cavities, these operations are wide band and free from joule loss. The Bloch mode in a simple periodic dielectric structure provides a new platform for multi-functional optical operations and may find potential applications in nanophotonics and biomedicine.

Nanophotonic Platforms for Chiral Sensing and Separation

Chirality in Nature can be found across all length scales, from the subatomic to the galactic. At the molecular scale, the spatial dissymmetry in the atomic arrangements of pairs of mirror-image molecules, known as enantiomers, gives rise to fascinating and often critical differences in chemical and physical properties. With increasing hierarchical complexity, protein function, cell communication, and organism health rely on enantioselective interactions between molecules with selective handedness. For example, neurodegenerative and neuropsychiatric disorders including Alzheimer's and Parkinson's diseases have been linked to distortion of chiral-molecular structure. Moreover, d-amino acids have become increasingly recognized as potential biomarkers, necessitating comprehensive analytical methods for diagnosis that are capable of distinguishing l- from d-forms and quantifying trace concentrations of d-amino acids. Correspondingly, many pharmaceuticals and agrochemicals consist of chiral molecules that target particular enantioselective pathways. Yet, despite the importance of molecular chirality, it remains challenging to sense and to separate chiral compounds. Chiral-optical spectroscopies are designed to analyze the purity of chiral samples, but they are often insensitive to the trace enantiomeric excess that might be present in a patient sample, such as blood, urine, or sputum, or pharmaceutical product. Similarly, existing separation schemes to enable enantiopure solutions of chiral products are inefficient or costly. Consequently, most pharmaceuticals or agrochemicals are sold as racemic mixtures, with reduced efficacy and potential deleterious impacts.Recent advances in nanophotonics lay the foundation toward highly sensitive and efficient chiral detection and separation methods. In this Account, we highlight our group's effort to leverage nanoscale chiral light-matter interactions to detect, characterize, and separate enantiomers, potentially down to the single molecule level. Notably, certain resonant nanostructures can significantly enhance circular dichroism for improved chiral sensing and spectroscopy as well as high-yield enantioselective photochemistry. We first describe how achiral metallic and dielectric nanostructures can be utilized to increase the local optical chirality density by engineering the coupling between electric and magnetic optical resonances. While plasmonic nanoparticles locally enhance the optical chirality density, high-index dielectric nanoparticles can enable large-volume and uniform-sign enhancements in the optical chirality density. By overlapping these electric and magnetic resonances, local chiral fields can be enhanced by several orders of magnitude. We show how these design rules can enable high-yield enantioselective photochemistry and project a 2000-fold improvement in the yield of a photoionization reaction. Next, we discuss how optical forces can enable selective manipulation and separation of enantiomers. We describe the design of low-power enantioselective optical tweezers with the ability to trap sub-10 nm dielectric particles. We also characterize their chiral-optical forces with high spatial and force resolution using combined optical and atomic force microscopy. These optical tweezers exhibit an enantioselective optical force contrast exceeding 10 pN, enabling selective attraction or repulsion of enantiomers based on the illumination polarization. Finally, we discuss future challenges and opportunities spanning fundamental research to technology translation. Disease detection in the clinic as well as pharmaceutical and agrochemical industrial applications requiring large-scale, high-throughput production will gain particular benefit from the simplicity and relative low cost that nanophotonic platforms promise.