In Situ Observation of Vapor-Assisted 2D-3D Heterostructure Formation for Stable and Efficient Perovskite Solar Cells

Surface Crystallization Modulation toward Highly-Oriented and Phase-Pure 2D Perovskite Solar Cells

2D perovskites have shown great potential toward stable and efficient photovoltaic devices. However, the crystal orientation and phase impurity issues of 2D perovskite films originating from the anisotropic crystal structure and specific growth mechanism have demoted their optoelectronic performances. Here, the surface crystallization modulation technique is introduced to fabricate the high-quality 2D perovskite films with both vertical crystal orientation and high phase purity by regulating the crystallization dynamics. The solvent atmosphere condition is instituted during film processing, which promotes the formation of an oriented 2D perovskite layer in stoichiometric composition at the vapor-liquid interface and templates the subsequent film growth. The solar cells based on the optimized 2D perovskite films exhibit a power conversion efficiency of 15.04%, the record for 2D perovskites (with the perovskite slab thickness n ≤ 3 and high phase purity). The solar cells based on the highly-oriented and phase-pure 2D perovskite films also demonstrate excellent thermal and humidity stabilities.

Structural and chemical properties of anion exchanged CsPb(Br(1-x)Clx)3heterostructured perovskite nanowires imaged by nanofocused x-rays

Over the last years metal halide perovskites have demonstrated remarkable potential for integration in light emitting devices. Heterostructures allow for tunable bandgap depending on the local anion composition, crucial for optoelectronic devices, but local structural effects of anion exchange in single crystals is not fully understood. Here, we investigate how the anion exchange of CsPbBr3nanowires fully and locally exposed to HCl vapor affects the local crystal structure, using nanofocused x-rays. We study the nanoscale composition and crystal structure as function of HCl exposure time and demonstrate the correlation of anion exchange with changes in the lattice parameter. The local composition was measured by x-ray fluorescence and x-ray diffraction, with general agreement of both methods but with much less variation using latter. The heterostructured nanowires exhibit unintentional gradients in composition, both axially and radially. Ferroelastic domains are observed for all HCl exposure times, and the magnitude of the lattice tilt at the domain walls scales with the Cl concentration.

K. S, Rondiya SR. Unraveling Interface-Driven and Loss Mechanism-Centric Phenomena in 3D/2D Halide Perovskites: Prospects for Optoelectronic Applications

In recent years, organic-inorganic metal halide perovskite solar cells (PSCs) have attracted considerable interest due to their remarkable and rapidly advancing efficiencies. Over the past decade, PSC efficiencies have significantly approached those of state-of-the-art silicon-based photovoltaics, making them a promising material. Currently, the scientific community widely recognizes the performance of 3D-PSCs and 2D-PSCs individually. However, when both are combined to form a heterostructure, the lattice and charge dynamics at the interface undergo a multitude of mechanisms that affect their performance. The interface between heterostructures facilitates the degradation of PSCs. The degradation pathways can be attributed to lattice distortions, inhomogeneous energy landscapes, interlayer ion migration, nonradiative recombination, and charge accumulation. This Review is dedicated to examining the phenomena that arise at the interface of 3D/2D halide perovskites and their related photophysical properties and loss mechanism processes. We mainly focus on the impact of lattice mismatch, energy level alignment, anomalous carrier dynamics, and loss mechanisms. We propose a "cause-impact-identify-rectify" approach to gain a comprehensive understanding of the ultrafast processes occurring within the material. Finally, we highlight the importance of advanced spectroscopic and imaging techniques in unraveling these intricate mechanisms. This discussion delves into the future possibilities of fabricating 3D/2D heterostructure-based optoelectronic devices, pushing the boundaries of performance across diverse fields. It envisions the creation of devices with unparalleled capabilities, exceeding the limitations of current technologies.

Facet-Dependent Passivation for Efficient Perovskite Solar Cells

Understanding the interplay between the surface structure and the passivation materials and their effects associated with surface structure modification is of fundamental importance; however, it remains an unsolved problem in the perovskite passivation field. Here, we report a surface passivation principle for efficient perovskite solar cells via a facet-dependent passivation phenomenon. The passivation process selectively occurs on facets, which is observed with various post-treatment materials with different functionality, and the atomic arrangements of the facets determine the alignments of the passivation layers. The profound understanding of facet-dependent passivation leads to the finding of 2-amidinopyridine hydroiodide as the material for a uniform and effective passivation on both (100) and (111) facets. Consequently, we achieved perovskite solar cells with an efficiency of 25.10% and enhanced stability. The concept of facet-dependent passivation can provide an important clue on unidentified passivation principles for perovskite materials and a novel means to enhance the performance and stability of perovskite-based devices.

Synergy of 3D and 2D Perovskites for Durable, Efficient Solar Cells and Beyond

Three-dimensional (3D) organic-inorganic lead halide perovskites have emerged in the past few years as a promising material for low-cost, high-efficiency optoelectronic devices. Spurred by this recent interest, several subclasses of halide perovskites such as two-dimensional (2D) halide perovskites have begun to play a significant role in advancing the fundamental understanding of the structural, chemical, and physical properties of halide perovskites, which are technologically relevant. While the chemistry of these 2D materials is similar to that of the 3D halide perovskites, their layered structure with a hybrid organic-inorganic interface induces new emergent properties that can significantly or sometimes subtly be important. Synergistic properties can be realized in systems that combine different materials exhibiting different dimensionalities by exploiting their intrinsic compatibility. In many cases, the weaknesses of each material can be alleviated in heteroarchitectures. For example, 3D-2D halide perovskites can demonstrate novel behavior that neither material would be capable of separately. This review describes how the structural differences between 3D halide perovskites and 2D halide perovskites give rise to their disparate materials properties, discusses strategies for realizing mixed-dimensional systems of various architectures through solution-processing techniques, and presents a comprehensive outlook for the use of 3D-2D systems in solar cells. Finally, we investigate applications of 3D-2D systems beyond photovoltaics and offer our perspective on mixed-dimensional perovskite systems as semiconductor materials with unrivaled tunability, efficiency, and technologically relevant durability.

Ultralong Carrier Lifetime Exceeding 20 µs in Lead Halide Perovskite Film Enable Efficient Solar Cells

The carrier lifetime is one of the key parameters for perovskite solar cells (PSCs). However, it is still a great challenge to achieve long carrier lifetimes in perovskite films that are comparable with perovskite crystals owning to the large trap density resulting from the unavoidable defects in grain boundaries and surfaces. Here, by regulating the electronic structure with the developed 2-thiopheneformamidinium bromide (ThFABr) combined with the unique film structure of 2D perovskite layer caped 2D/3D polycrystalline perovskite film, an ultralong carrier lifetime exceeding 20 µs and carrier diffusion lengths longer than 6.5 µm are achieved. These excellent properties enable the ThFA-based devices to yield a champion efficiency of 24.69% with a minimum VOC loss of 0.33 V. The unencapsulated device retains ≈95% of its initial efficiency after 1180 h by max power point (MPP) tracking under continuous light illumination. This work provides important implications for structured 2D/(2D/3D) perovskite films combined with unique FA-based spacers to achieve ultralong carrier lifetime for high-performance PSCs and other optoelectronic applications.

Efficient Inorganic Vapor-Assisted Defects Passivation for Perovskite Solar Module

Surface trap as intrinsic defects-mediated non-radiative charge recombination is a major obstacle to achieving the reliable fabrication of high-efficiency and large-area perovskite photovoltaics. Here a CS₂ vapor-assisted passivation strategy is proposed for perovskite solar module, aiming to passivate the iodine vacancy and uncoordinated Pb²⁺ caused by ion migration. Significantly, this method can avoid the disadvantages of inhomogeneity film caused by spin-coating-assisted passivation and reconstruction of perovskite surface from solvent. The CS₂ vapor passivated perovskite device presents a higher defect formation energy (0.54 eV) of iodine vacancy than the pristine (0.37 eV), while uncoordinated Pb²⁺ is bonded with CS₂ . The shallow level defect passivation of iodine vacancy and uncoordinated Pb²⁺ has obviously enhanced the device efficiencies (25.20% for 0.08 cm² and 20.66% for 40.6 cm² ) and the stability, exhibiting an average T₈₀ -lifetime of 1040 h working at the maximum power point, and maintaining over 90% of initial efficiency after 2000 h at RH = 30% and 30 °C.

Topotactic, Vapor-Phase, In Situ Monitored Formation of Ultrathin, Phase-Pure 2D-on-3D Halide Perovskite Surfaces

Two-dimensional (2D) halide perovskites, HaPs, can provide chemical stability to three-dimensional (3D) HaP surfaces, protecting them from exposure to ambient species and from reacting with contacting layers. Both actions occur with 2D HaPs, with the general stoichiometry R₂PbI₄ (R: long or bulky organic amine) covering the 3D ones. Adding such covering films can also boost power conversion efficiencies of photovoltaic cells by passivating surface/interface trap states. For maximum benefit, we need conformal ultrathin and phase-pure (n = 1) 2D layers to enable efficient tunneling of photogenerated charge carriers through the 2D film barrier. Conformal coverage of ultrathin (<10 nm) R₂PbI₄ layers on 3D perovskites is challenging with spin coating; even more so is its upscaling for larger-area devices. We report on vapor-phase cation exchange of the 3D surface with the R₂PbI₄ molecules and real-time in situ growth monitoring by photoluminescence (PL) to determine limits for forming ultrathin 2D layers. We characterize the 2D growth stages, following the changing PL intensity-time profiles, by combining structural, optical, morphological, and compositional characterizations. Moreover, from quantitative X-ray photoelectron spectroscopy (XPS) analysis on 2D/3D bilayer films, we estimate the smallest width of a 2D cover that we can grow to be <5 nm, roughly the limit for efficient tunneling through a (semi)conjugated organic barrier. We also find that, besides protecting the 3D against ambient humidity-induced degradation, the ultrathin 2D-on-3D film also aids self-repair following photodamage.

Spontaneous Internal Encapsulation via Dual Interfacial Perovskite Heterojunction Enables Highly Efficient and Stable Perovskite Solar Cells

Deep traps stemming from the defects formed at the surfaces and grain boundaries of the perovskite films are the main reasons of nonradiative recombination and material degradation, which significantly affect efficiency and stability of perovskite solar cells (PSCs). Here, a spontaneous internal encapsulation strategy was developed by constructing a dual interfacial perovskite heterojunction at the top and buried interface of the three-dimensional (3D) perovskite film. The spacer cations of the two-dimensional (2D) perovskite structure interacted strongly with the 3D perovskite to passivate the defects and optimize the energy level alignment. Meanwhile, the interfacial perovskite heterojunction underearth delayed the crystallization speed and improved the crystallization quality of the upper 3D perovskite. Thanks to these positive effects, the PSC exhibited a power conversion efficiency of 22.92% with good reproducibility. Significantly, the unencapsulated device with the dual interfacial perovskite heterojunction maintained 88% of its initial efficiency after 2900 h under 65 ± 5% RH in air.

In Situ and Operando Characterizations of Metal Halide Perovskite and Solar Cells: Insights from Lab-Sized Devices to Upscaling Processes

The performance and stability of metal halide perovskite solar cells strongly depend on precursor materials and deposition methods adopted during the perovskite layer preparation. There are often a number of different formation pathways available when preparing perovskite films. Since the precise pathway and intermediary mechanisms affect the resulting properties of the cells, in situ studies have been conducted to unravel the mechanisms involved in the formation and evolution of perovskite phases. These studies contributed to the development of procedures to improve the structural, morphological, and optoelectronic properties of the films and to move beyond spin-coating, with the use of scalable techniques. To explore the performance and degradation of devices, operando studies have been conducted on solar cells subjected to normal operating conditions, or stressed with humidity, high temperatures, and light radiation. This review presents an update of studies conducted in situ using a wide range of structural, imaging, and spectroscopic techniques, involving the formation/degradation of halide perovskites. Operando studies are also addressed, emphasizing the latest degradation results for perovskite solar cells. These works demonstrate the importance of in situ and operando studies to achieve the level of stability required for scale-up and consequent commercial deployment of these cells.

Humidity-Insensitive, Large-Area-Applicable, Hot-Air-Assisted Ambient Fabrication of 2D Perovskite Solar Cells

2D layered perovskites (LPs) have shown great potential to deliver high-performance photovoltaic devices with long-term stability. Despite many signs of progress being made in film quality and device performance, LP films are mainly processed in strict conditions and through non-scalable techniques. Here, the hot-air-assisted ambient fabrication technique is introduced to prepare LP films for efficient and stable solar cells. The high-quality LP films with good crystallinity, preferable orientation and desirable morphology are obtained by balancing the crystal nucleation and growth processes. Employing the synchrotron-based in situ grazing-incidence X-ray diffraction technique, hot air induces the solidification of solutes and forms an intermediate at the air-liquid interface, which transforms into 3D-like perovskite, followed by the growth of the 2D species toward the substrate. The optimal LP film delivers a device power conversion efficiency of 16.36%, the best value for the LP-based solar cells prepared by the non-spin-coating techniques. The solar cell performance is insensitive to the film processing humidity and the device size is upscalable, which promises real-world deployment of LP-based optoelectronic devices.

Roles that Organic Ammoniums Play on the Surface of the Perovskite Film: A Review

The roles of organic ammonium salts (OASs) which are widely used for the surface treatment of the perovskite film, including formation of 2D perovskites, direct surface passiviation, and other effects, have been reviewed. The influencing factors for these roles of OASs are also discussed, which are important for improved efficiency and stability of perovskite solar cells. More information can be found in the Review article by X. Guo and co-workers. (DOI: 10.1002/chem.202203001).

A bioinspired flexible neuromuscular system based thermal-annealing-free perovskite with passivation

Brain-inspired electronics require artificial synapses that have ultra-low energy consumption, high operating speed, and stable flexibility. Here, we demonstrate a flexible artificial synapse that uses a rapidly crystallized perovskite layer at room temperature. The device achieves a series of synaptic functions, including logical operations, temporal and spatial rules, and associative learning. Passivation using phenethyl-ammonium iodide eliminated defects and charge traps to reduce the energy consumption to 13.5 aJ per synaptic event, which is the world record for two-terminal artificial synapses. At this ultralow energy consumption, the device achieves ultrafast response frequency of up to 4.17 MHz; which is orders of magnitude magnitudes higher than previous perovskite artificial synapses. A multi-stimulus accumulative artificial neuromuscular system was then fabricated using the perovskite synapse as a key processing unit to control electrochemical artificial muscles, and realized muscular-fatigue warning. This artificial synapse will have applications in future bio-inspired electronics and neurorobots.

In Situ Observing and Tuning the Crystal Orientation of Two-Dimensional Layered Perovskite via the Chlorine Additive

Precise control of crystal orientation in two-dimensional (2D) layered perovskites (LPs) is vital for their optoelectronic applications due to the structure-induced anisotropy in optical and electrical properties. Herein, we directly observe and control the crystal orientation of the butylammonium-based 2D LP films. Employing the synchrotron-based in situ grazing-incidence X-ray diffraction technique, we reveal the orientation modulation mechanism of the Cl additive by following the crystallization dynamics and chemical conversion pathways during film formation. Two new Cl-related intermediates are identified which serve as templates directing the orientational growth of the 2D LP films. We fine-tune the crystal orientation of 2D LP films through the Cl additive and incorporate the films with the requisite crystal orientations in solar cells and photodetectors. The optoelectronic performances of the devices show a strong correlation with the crystal orientation of the 2D LP films.

Utilizing Nonpolar Organic Solvents for the Deposition of Metal-Halide Perovskite Films and the Realization of Organic Semiconductor/Perovskite Composite Photovoltaics

Having captivated the research community with simple fabrication processes and staggering device efficiencies, perovskite-based optoelectronics are already on the way to commercialization. However, one potential obstacle to this commercialization is the almost exclusive use of toxic, highly coordinating, high boiling point solvents to make perovskite precursor inks. Herein, we demonstrate that nonpolar organic solvents, such as toluene, can be combined with butylamine to form an effective solvent for alkylammonium-based perovskites. Beyond providing broader solvent choice, our finding opens the possibility of blending perovskite inks with a wide range of previously incompatible materials, such as organic molecules, polymers, nanocrystals, and structure-directing agents. As a demonstration, using this solvent, we blend the perovskite ink with 6,6-phenyl-C-61-butyric acid methyl ester and show improved perovskite crystallization and device efficiencies. This processing route may enable a myriad of new possibilities for tuning the active layers in efficient photovoltaics, light-emitting diodes, and other semiconductor devices.

Halide perovskite dynamics at work: Large cations at 2D-on-3D interfaces are mobile

SignificanceSurface engineering of halide perovskites (HaPs), semiconductors with amazing optoelectronic properties, is critical to improve the performance and ambient stability of HaP-based solar cells and light emitting diodes (LEDs). Ultrathin layers of two-dimensional (2D) analogs of the three-dimensional (3D) HaPs are particularly attractive for this because of their chemical similarities but higher ambient stability. But do such 2D/3D interfaces actually last, given that ions in HaPs move readily-i.e., what happens at those interfaces on the atomic scale? A special electron microscopy, which as a bonus also reveals the true conditions for nondestructive analysis, shows that the large ions that are a necessary part of the 2D films can move into the 3D HaP, a fascinating illustration of panta rei in HaPs.

Multidimensional perovskite solar cells

Organic-inorganic hybrid perovskite solar cells (PSCs) have attracted extensive attention, and their certified power conversion efficiency (PCE) has reached 25.5%. However, the instability of the high-efficiency 3-dimensional (3D) perovskite against ambient conditions (moisture, light and thermal) and the existing defects severely limit its practical applications and commercialization. Unlike 3D perovskites, the large hydrophobic spacer cations in low-dimensional (2D, 1D, and 0D) perovskites are able to effectively improve the stability, but they also weaken the light absorption range and hinder charge transport. The construction of a low-dimensional/3D perovskite multidimensional structure, which can combine the advantages of the high stability of low-dimensional perovskites and the superior efficiency of 3D perovskites, is proposed to achieve high efficiency and ultrastability. Moreover, the proper incorporation of low-dimensional perovskite into 3D perovskite can passivate defects and inhibit ion migration. Herein, this article summarizes the recent research progress of low-dimensional/3D perovskite multidimensional structures for PSCs and provides some perspectives toward developing stable and efficient PSCs.

Surface Passivation Using 2D Perovskites toward Efficient and Stable Perovskite Solar Cells

3D perovskite solar cells (PSCs) have shown great promise for use in next-generation photovoltaic devices. However, some challenges need to be addressed before their commercial production, such as enormous defects formed on the surface, which result in severe SRH recombination, and inadequate material interplay between the composition, leading to thermal-, moisture-, and light-induced degradation. 2D perovskites, in which the organic layer functions as a protective barrier to block the erosion of moisture or ions, have recently emerged and attracted increasing attention because they exhibit significant robustness. Inspired by this, surface passivation by employing 2D perovskites deposited on the top of 3D counterparts has triggered a new wave of research to simultaneously achieve higher efficiency and stability. Herein, we exploited a vast amount of literature to comprehensively summarize the recent progress on 2D/3D heterostructure PSCs using surface passivation. The review begins with an introduction of the crystal structure, followed by the advantages of the combination of 2D and 3D perovskites. Then, the surface passivation strategies, optoelectronic properties, enhanced stability, and photovoltaic performance of 2D/3D PSCs are systematically discussed. Finally, the perspectives of passivation techniques using 2D perovskites to offer insight into further improved photovoltaic performance in the future are proposed.

Hetero-perovskite engineering for stable and efficient perovskite solar cells

This review summarizes and discusses the HPSC engineering and optimization mechanism, and provides systematic knowledge and prospects of their development in the photovoltaic field.

Interfacial Modification via a 1,4-Butanediamine-Based 2D Capping Layer for Perovskite Solar Cells with Enhanced Stability and Efficiency

Organic-inorganic perovskites face the issues of being vulnerable to oxygen and moisture and the trap sites located at the surface and grain boundaries. Integration of two-dimensional (2D) perovskites as a capping layer is an effective route to enhance both photovoltaic efficiency and environmental stability of the three-dimensional (3D) underlayer. Here, we employ 1,4-butanediammonium diiodide (BDADI), which has a short chain length and diammonium cations, to construct a 3D/2D stacking perovskite solar cells (PSCs). The introduction of BDA2+ could passivate surface defects in 3D perovskites by forming 2D Dion-Jacobson (DJ) phase perovskites and effectively suppressing nonradiative recombination, thus resulting in a longer carrier lifetime. The DJ 2D capping layer also regulate the energy level arrangement, enabling a better charge extraction and transport process. In addition, the water-resistance ability of 3D perovskite gets improved because of the hydrophobic characteristic of 1,4-butanediammonium cations. Consequently, the 3D/2D stacking PSCs yield an energy conversion efficiency of 20.32% in company with the enhanced long-term stability.

Growth and Degradation Kinetics of Organic-Inorganic Hybrid Perovskite Films Determined by In Situ Grazing-Incidence X-Ray Scattering Techniques

Organic-inorganic halide perovskite (OIHP) solar cells hold a great promise for commercial breakthrough since their power conversion efficiency has been pushed beyond the mark of 25%, making them capable of competing with traditional crystalline silicon solar cells. The key to achieve efficient and stable perovskite solar cells is inherently related to the film morphology. The understanding of the kinetic processes of film formation and degradation opens up possibilities to tailor the film morphology via the regulation of precursor and processing parameters. In situ grazing-incidence X-ray scattering (GIXS) techniques allow for tracking the morphology evolution of thin films at different length scales and with high temporal resolution. In this review, the selected examples for application of in situ grazing-incidence wide-angle X-ray scattering and grazing-incidence small-angle X-ray scattering techniques to the growth and stability of OIHPs are summarized after a brief introduction to both techniques, highlighting particularly the morphological evolution of perovskite films over time. Then the correlated mathematical models are reviewed to give a toolbox for analyzing the mechanisms of film formation and degradation. Thus, an overview on the in situ GIXS methods is linked to the research of OIHP kinetics.

Humidity-Induced Defect-Healing of Formamidinium-Based Perovskite Films

Formamidinium (FA)-based perovskite material holds great potential to deliver highly efficient commercial solar cells. However, the FA-based perovskite films are commonly processed under a strictly controlled environment, which would eventually hinder their way to commercialization. Herein, a systematic study is conducted to investigate the sequential deposition of FA-based perovskite films that are annealed under ambient conditions. Unexpectedly, the films prepared in low humidity condition possess less pinholes and defects and exhibit better device performances than those prepared in the moisture-free condition. A series of in situ and ex situ investigations are conducted which reveal defects in perovskite films are continuously healed during the film annealing process under the humid condition. This extraordinary effect is attributed to the interaction between water molecules and perovskite. The current study should shed light on the ambient fabrication of FA-based perovskite solar cells and foster their real-world applications.

Defect Passivation in Lead-Halide Perovskite Nanocrystals and Thin Films: Toward Efficient LEDs and Solar Cells

Lead-halide perovskites (LHPs), in the form of both colloidal nanocrystals (NCs) and thin films, have emerged over the past decade as leading candidates for next-generation, efficient light-emitting diodes (LEDs) and solar cells. Owing to their high photoluminescence quantum yields (PLQYs), LHPs efficiently convert injected charge carriers into light and vice versa. However, despite the defect-tolerance of LHPs, defects at the surface of colloidal NCs and grain boundaries in thin films play a critical role in charge-carrier transport and nonradiative recombination, which lowers the PLQYs, device efficiency, and stability. Therefore, understanding the defects that play a key role in limiting performance, and developing effective passivation routes are critical for achieving advances in performance. This Review presents the current understanding of defects in halide perovskites and their influence on the optical and charge-carrier transport properties. Passivation strategies toward improving the efficiencies of perovskite-based LEDs and solar cells are also discussed.

Insights into Microscopic Crystal Growth Dynamics of CH3NH3PbI3 under a Laser Deposition Process Revealed by In Situ X-ray Diffraction

The process dynamics for the vacuum deposition of methylammonium lead iodide (MAPbI₃) perovskite was analyzed by in situ X-ray diffraction using synchrotron radiation. MAPbI₃ was fabricated by alternatingly supplying PbI₂ and methylammonium iodide via a laser deposition system installed at the synchrotron beamline BL46XU at SPring-8, and in situ crystallization analysis was conducted. Microscopic insights into the crystallization were obtained, including observation of Laue oscillation during the PbI₂ growth and octahedral unit (PbI₆) rotation during the transformation into perovskite. On the basis of this analysis, conditions that favor the construction of atomically flat MAPbI₃ perovskite films were deduced.

Methods of Stability Control of Perovskite Solar Cells for High Efficiency

The increasing demand for renewable energy devices over the past decade has motivated researchers to develop new and improve the existing fabrication techniques. One of the promising candidates for renewable energy technology is metal halide perovskite, owning to its high power conversion efficiency and low processing cost. This work analyzes the relationship between the structure of metal halide perovskites and their properties along with the effect of alloying and other factors on device stability, as well as causes and mechanisms of material degradation. The present work discusses the existing approaches for enhancing the stability of PSC devices through modifying functional layers. The advantages and disadvantages of different methods in boosting device efficiency and reducing fabrication cost are highlighted. In addition, the paper presents recommendations for the enhancement of interfaces in PSC structures.

Perovskite Quantum Wells Formation Mechanism for Stable Efficient Perovskite Photovoltaics-A Real-Time Phase-Transition Study

The combination of a bulk 3D perovskite layer and a reduced dimensional perovskite layer (perovskite quantum wells (PQWs)) is demonstrated to enhance the performance of perovskite solar cells (PSCs) significantly in terms of stability and efficiency. This perovskite hierarchy has attracted intensive research interest; however, the in-depth formation mechanism of perovskite quantum wells on top of a 3D perovskite layer is not clearly understood and is therefore the focus of this study. Along with ex situ morphology and photophysical characterization, the time-resolved grazing-incidence wide-angle X-ray scattering (TS-GIWAXS) technique performed in this study provides real-time insights on the phase-transition during the organic cation (HTAB ligand molecule) coating and PQWs/3D architecture formation process. A strikingly strong ionic reaction between the 3D perovskite and the long-chain organic cation leads to the quick formation of an ordered intermediate phase within only a few seconds. The optimal PQWs/3D architecture is achieved by controlling the HTAB casting, which is assisted by time-of-flight SIMS characterization. By controlling the second ionic reaction during the long-chain cation coating process, along with the fluorinated poly(triarylamine) (PTAA) as a hole-transport layer, the perovskite solar cells demonstrate efficiencies exceeding 22% along with drastically improved device stability.

3D/2D Bilayerd Perovskite Solar Cells with an Enhanced Stability and Performance

The formation of a thin 2D perovskite layer on the surface of 3D perovskite films has become a popular strategy for obtaining a high-efficiency perovskite solar cell (PSC) with an ensured device stability. In this review paper, various experimental methods used for growth of the 2D layer are introduced with the resulting film properties. Furthermore, a variety of organic cation sources for the 2D layer, ranging from alkyl to phenyl ammonium, are explored to investigate their impact on the device stability and photovoltaic performance.

Layered perovskite materials: key solutions for highly efficient and stable perovskite solar cells

Metal halide perovskites having three-dimensional crystal structures are being applied successfully in various optoelectronic applications. To address their most challenging issues-instability and toxicity-without losing efficiency, lower-dimensional perovskites appear to be promising alternatives. Recently, two-dimensional (2D) perovskite solar cells have been developed exhibiting excellent photostability and moisture-stability, together with moderate device efficiency. This review summarizes the photophysical properties and operating mechanisms of 2D perovskites as well as recent advances in their applications in solar cell devices. Also presented is an agenda for the next-stage development of stable perovskite materials for solar cell applications, highlighting the issues of stability and toxicity that require further study to ensure commercialization.