Synergistic Superhydrophobic and Photodynamic Cotton Textiles with Remarkable Antibacterial Activities

Superhydrophobic Solar-to-Thermal Materials Toward Cutting-Edge Applications

Solar-to-thermal conversion is a direct and effective way to absorb sunlight for heat via the rational design and control of photothermal materials. However, when exposed to water-existed conditions, the conventional solar-to-thermal performance may experience severe degradation owing to the high specific heat capacity of water. To tackle with the challenge, the water-repellent function is introduced to construct superhydrophobic solar-to-thermal materials (SSTMs) for achieving stable heating, and even, for creating new application possibilities under water droplets, sweat, seawater, and ice environments. An in-depth review of cutting-edge research of SSTMs is given, focusing on synergetic functions, typical construction methods, and cutting-edge potentials based on water medium. Moreover, the current challenges and future prospects based on SSTMs are also carefully discussed.

Dual-Coating of Fluorinated Polydimethylsiloxane/Fluorinated SiO2 Nanoparticles for Superhydrophobic and High-Efficiency Bacteriostatic Surface

A simple two-step spray method is used to prepare superhydrophobic and bacteriostatic surfaces, involving dual-coating with polydimethylsiloxane-normal-fluorine (PDMS-NF) or branched-fluorine (PDMS-BF) in combination with fluorinated silica nanoparticles (FSiO2 -NPs) using a spray technique. This approach has the potential to create surfaces with both water-repellent and antimicrobial properties, which could be useful in a variety of applications. It is noteworthy that the dual-coating on cotton fabric exhibited an impressive dual-scale roughness and achieved superhydrophobicity with a water contact angle of 158° and a hysteresis of less than 3°. Additionally, the coating was subjected to an ultra-high concentration of bacteria (109 CFU/mL) and was still able to inhibit more than 80 % of attachment, demonstrating its effectiveness as a bacteriostatic surface.

Protein-based coating strategy for preparing durable sunlight-driven rechargeable antibacterial, super hydrophilic, and UV-resistant textiles

With the improvement of the hygiene awareness and pathogen prevention awareness of patients and medical staff, textiles with efficient and long-lasting pathogen inactivation effects are urgently needed. Photodynamic therapy (PDT) has rapidly developed into a new type of antibacterial technology due to its high antibacterial activity and has received widespread attention. However, the commonly used photosensitizers are mostly inorganic nanomaterials, which have poor adhesion to textiles and are not environmentally or human friendly. Here, we report a strategy of preparation of a sunlight-driven rechargeable antibacterial textiles based on natural antibacterial agents, which can work in light and dark conditions. The prepared BD-PTL@wool has long-lasting antibacterial properties, can rapidly produce ROS, and can store sterilization activity under light irradiation, ensuring all-day bacterial killing (>99.95 % under light irradiation and >99.80 % under dark conditions after light irradiation). BD-PTL@wool has excellent reusability, and the antibacterial rate can still above 95 % after repeated use for 5 times. In addition, BD-PTL@wool has excellent hydrophilic, UV resistance, biocompatibility and can withstand 50 washing cycles. The successful application of this strategy in textile preparation broadens the research idea for exploring the application of green photosensitive antibacterial materials in textile field.

Photodynamic toluidine blue-gold nanoconjugates as a novel therapeutic for Staphylococcal biofilms

Staphylococci are among the most frequent bacteria known to cause biofilm-related infections. Pathogenic biofilms represent a global healthcare challenge due to their high tolerance to antimicrobials. In this study, water soluble polyethylene glycol (PEG)-coated gold nanospheres (28 ppm) and nanostars (15 ppm) with electrostatically adsorbed photosensitizer (PS) Toluidine Blue O (TBO) ∼4 μM were successfully synthesized and characterized as PEG-GNPs@TBO and PEG-GNSs@TBO. Both nanoconjugates and the TBO 4 μM solution showed remarkable, if similar, antimicrobial photodynamic inactivation (aPDI) effects at 638 nm, inhibiting the formation of biofilms by two Staphylococcal strains: a clinical methicillin-resistant Staphylococcus aureus (MRSA) isolate and Staphylococcus epidermidis (S. epidermidis) RP62A. Alternatively in biofilm eradication treatments, the aPDI effects of PEG-GNSs@TBO were more effective and yielded a 75% and 50% reduction in viable count of MRSA and S. epidermidis RP62A preformed biofilms, respectively and when compared with untreated samples. This reduction in viable count was even greater than that obtained through aPDI treatment using a 40 μM TBO solution. Confocal laser microscopy (CLSM) and scanning electron microscope (SEM) images of PEG-GNSs@TBO's aPDI treatments revealed significant changes in the integrity and morphology of biofilms, with fewer colony masses. The generation of reactive oxygen species (ROS) upon PEG-GNSs@TBO's aPDI treatment was detected by CLSM using a specific ROS fluorescent probe, demonstrating bright fluorescence red spots across the surfaces of the treated biofilms. Our findings shine a light on the potential synergism between gold nanoparticles (AuNPs) and photosensitizers in developing novel nanoplatforms to target Staphylococcal biofilm related infections.

Recent Advances in Dual-Function Superhydrophobic Antibacterial Surfaces

Bacterial adhesion and subsequent biofilm formation on the surfaces of synthetic materials imposes a significant burden in various fields, which can lead to infections in patients or reduce the service life of industrial devices. Therefore, there is increasing interest in imbuing surfaces with antibacterial properties. Bioinspired superhydrophobic surfaces with high water contact angles (>150°) exhibit excellent surface repellency against contaminations, thereby preventing initial bacterial adhesion and inhibiting biofilm formation. However, conventional superhydrophobic surfaces typically lack long-term durability and are incapable of achieving persistent efficacy against bacterial adhesion. To overcome these limitations, in recent decades, dual-function superhydrophobic antibacterial surfaces with both bacteria-repelling and bacteria-killing properties have been developed by introducing bactericidal components. These surfaces have demonstrated improved long-term antibacterial performance in addressing the issues associated with surface-attached bacteria. This review summarizes the recent advancements of these dual-function superhydrophobic antibacterial surfaces. First, a brief overview of the fabrication strategies and bacteria-repelling mechanism of superhydrophobic surfaces is provided and then the dual-function superhydrophobic antibacterial surfaces are classified into three types based on the bacteria-killing mechanism: i) mechanotherapy, ii) chemotherapy, and iii) phototherapy. Finally, the limitations and challenges of current research are discussed and future perspectives in this promising area are proposed.

Highly active nanoparticle enhanced rapid adsorption-killing mechanism to combat multidrug-resistant bacteria

Contact-killing surfaces with the ability to rapidly adsorb and kill microorganisms are desperately needed since the rapid outbreak of multidrug-resistant (MDR) bacteria poses a serious threat to human health. Therefore, a series of amphiphilic nanoengineered polyquaterniums (ANPQs) were synthesized, and immobilizing ANPQs onto equipment surfaces provided a simple method for preventing microbial infections. The strong charge-positive property of ANPQ offered the possibility of rapid adsorption and efficient killing, such that all bacteria are adsorbed after 10 seconds of contact with ANPQ-treated fabrics, and more than 99.99% of pathogens are killed within 30 seconds. Surprisingly, the adsorption-killing mechanism made it difficult for bacteria to develop resistance to ANPQ coating, even after long-term repeated treatment. Importantly, in a Methicillin-resistant Staphylococcus aureus infection model, ANPQ-treated fabrics exhibited a potent anti-infectious performance while remaining nontoxic. It is envisaged that the strategy of using ANPQ coating undoubtedly provides a promising candidate for fighting MDR strains.

Antibacterial Superhydrophobic Cotton Fabric with Photothermal, Self-Cleaning, and Ultraviolet Protection Functionalities

Cotton fabrics with superhydrophobic, antibacterial, UV protection, and photothermal properties were developed using Ag/PDMS coatings, and the role of coating formulations on the obtained functionalities was studied. Specific attention was paid to understanding the relationships between the fabrics' superhydrophobicity and antibacterial activity against Escherichia coli (E. coli) bacteria. UV protection performance of Ag/PDMS coatings was thoroughly evaluated based on the variation of UV transmission rate through coated fabrics and photoinduced chemiluminescence spectra. Moreover, the effect of silver nanoparticles (Ag NPs) and PDMS on developing a photothermal effect on fabrics was discussed. It was found that the content of Ag NPs and PDMS played critical roles in determining the water contact angle (WCA) on modified fabrics. The largest WCA was 171.31°, which was durable even after numerous accelerated wash cycles and abrasions. Antibacterial activity of fabrics showed the positive effect of pure PDMS in bacterial growth inhibition. Moreover, it was found that the antibacterial performance was greatly affected by the content of Ag NPs loaded on fabrics rather than their superhydrophobic status. Moreover, increasing the content of Ag NPs boosted the UV protection level of fabrics, improved fabrics photostability, and reduced the UV transmission rate through fabrics. Testing the photothermal effect confirmed that the content of Ag NPs and PDMS both played prominent roles, where Ag acted as a photothermal agent and PDMS determined the NIR reflection rate from the coated surface. The modified fabrics were characterized using TGA, SEM, FTIR, and XRD techniques, and it was confirmed that using a higher amount of PDMS increased the amount of Ag NPs deposition on fabrics.

An introductory review on advanced multifunctional materials

This review summarizes the applications of some of the advanced materials. It included the synthesis of several nanoparticles such as metal oxide nanoparticles (e.g., Fe₃O₄, ZnO, ZrOSO₄, MoO_3-x, CuO, AgFeO₂, Co₃O₄, CeO₂, SiO₂, and CuFeO₂); metal hydroxide nanosheets (e.g., Zn₅(OH)₈(NO₃)₂·2H₂O, Zn(OH)(NO₃)·H₂O, and Zn₅(OH)₈(NO₃)₂); metallic nanoparticles (Ag, Au, Pd, and Pt); carbon-based nanomaterials (graphene, graphene oxide (GO), graphitic carbon nitride (g-C₃N₄), and carbon dots (CDs)); biopolymers (cellulose, nanocellulose, TEMPO-oxidized cellulose nanofibers (TOCNFs), and chitosan); organic polymers (e.g. covalent-organic frameworks (COFs)); and hybrid materials (e.g. metal-organic frameworks (MOFs)). Most of these materials were applied in several fields such as environmental-based technologies (e.g., water remediation, air purification, gas storage), energy (production of hydrogen, dimethyl ether, solar cells, and supercapacitors), and biomedical sectors (sensing, biosensing, cancer therapy, and drug delivery). They can be used as efficient adsorbents and catalysts to remove emerging contaminants e.g., inorganic (i.e., heavy metals) and organic (e.g., dyes, antibiotics, pesticides, and oils in water via adsorption. They can be also used as catalysts for catalytic degradation reactions such as redox reactions of pollutants. They can be used as filters for air purification by capturing carbon dioxide (CO₂) and volatile organic compounds (VOCs). They can be used for hydrogen production via water splitting, alcohol oxidation, and hydrolysis of NaBH₄. Nanomedicine for some of these materials was also included being an effective agent as an antibacterial, nanocarrier for drug delivery, and probe for biosensing.

Recent Advances in Superhydrophobic and Antibacterial Cellulose-Based Fibers and Fabrics: Bio-inspiration, Strategies, and Applications

Cellulose-based fabrics are ubiquitous in our daily lives. They are the preferred choice for bedding materials, active sportswear, and next-to-skin apparels. However, the hydrophilic and polysaccharide characteristics of cellulose materials make them vulnerable to bacterial attack and pathogen infection. The design of antibacterial cellulose fabrics has been a long-term and on-going effort. Fabrication strategies based on the construction of surface micro-/nanostructure, chemical modification, and the application of antibacterial agents have been extensively investigated by many research groups worldwide. This review systematically discusses recent research on super-hydrophobic and antibacterial cellulose fabrics, focusing on morphology construction and surface modification. First, natural surfaces showing liquid-repellent and antibacterial properties are introduced and the mechanisms behind are explained. Then, the strategies for fabricating super-hydrophobic cellulose fabrics are summarized, and the contribution of the liquid-repellent function to reducing the adhesion of live bacteria and removing dead bacteria is elucidated. Representative studies on cellulose fabrics functionalized with super-hydrophobic and antibacterial properties are discussed in detail, and their potential applications are also introduced. Finally, the challenges in achieving super-hydrophobic antibacterial cellulose fabrics are discussed, and the future research direction in this area is proposed.

Graphical Abstract

The figure summarizes the natural surfaces and the main fabrication strategies of superhydrophobic antibacterial cellulose fabrics and their potential applications.

Supplementary Information

The online version contains supplementary material available at 10.1007/s42765-023-00297-1.

Dual Coordination between Stereochemistry and Cations Endows Polyethylene Terephthalate Fabrics with Diversiform Antimicrobial Abilities for Attack and Defense

Modification of fabrics by stereochemical antiadhesion strategies is an emerging approach to antimicrobial fabric finishing. However, a purely antiadhesive fabric cannot avoid the passive adhesion of pathogenic microorganisms. To address this issue, borneol 4-formylbenzoate (BF) with a stereochemical structure is introduced into a cationic polymer PEI-modified PET fabric by a simple two-step method. The obtained fabric exhibits remarkable features of high bactericidal activity, excellent resistance to bacterial adhesion, desirable fungal repellent performance, and low cytotoxicity. More impressively, this modified fabric not only effectively reduces microbial contamination during food preservation but also plays a role in avoiding infection and accelerating wound healing in the mouse wound model. The dual coordination between stereochemistry and cations is validated as a viable "attack and defense" antimicrobial strategy, providing an effective guide for diversiform antimicrobial designs.

Self-Healing Superwetting Surfaces, Their Fabrications, and Properties

The research on superwetting surfaces with a self-healing function against various damages has progressed rapidly in the recent decade. They are expected to be an effective approach to increasing the durability and application robustness of superwetting materials. Various methods and material systems have been developed to prepare self-healing superwetting surfaces, some of which mimic natural superwetting surfaces. However, they still face challenges, such as being workable only for specific damages, external stimulation to trigger the healing process, and poor self-healing ability in the water, marine, or biological systems. There is a lack of fundamental understanding as well. This article comprehensively reviews self-healing superwetting surfaces, including their fabrication strategies, essential rules for materials design, and self-healing properties. Self-healing triggered by different external stimuli is summarized. The potential applications of self-healing superwetting surfaces are highlighted. This article consists of four main sections: (1) the functional surfaces with various superwetting properties, (2) natural self-healing superwetting surfaces (i.e., plants, insects, and creatures) and their healing mechanism, (3) recent research development in various self-healing superwetting surfaces, their preparation, wetting properties in the air or liquid media, and healing mechanism, and (4) the prospects including existing challenges, our views and potential solutions to the challenges, and future research directions.

Superhydrophobic Mechano-Bactericidal Surface with Photodynamic Antibacterial Capability

Bacterial invasion and proliferation on various surfaces pose a serious threat to public health worldwide. Conventional antibacterial strategies that mainly rely on bactericides exhibit high bacteria-killing efficiency but might trigger the well-known risk of antibiotic resistance. Here, we report a superhydrophobic mechano-bactericidal surface with photodynamically enhanced antibacterial capability. First, bioinspired nanopillars with polycarbonate as the bulk material were replicated from anodized alumina oxide templates via a simple hot-pressing molding method. Subsequently, a facile bovine serum albumin phase-transition method was used to introduce chlorin e6 onto the nanopillar-patterned surface, which was then perfluorinated to render the surface superhydrophobic. Benefiting from its strong liquid super-repellency and photodynamically enhanced mechano-bactericidal properties, the superhydrophobic nanopillar-patterned surface exhibits 100% antibacterial efficiency after 30 min visible light irradiation (650 nm, 20 mW cm^-2). More strikingly, the surface exhibited impressive long-lasting antimicrobial performance, maintaining a very high bactericidal efficiency (≥99%) even after 10 cycles of bacterial contamination tests. Also, the superhydrophobic nanopillar-patterned surface displays good hemocompatibility with a much lower than the 5% hemolysis rate. Overall, this work offers a new method for significantly enhancing the antibacterial efficiency of structural antimicrobial surfaces without involving any bactericidal agents, and this functional surface shows great potential in the field of advanced medical materials and hospital surfaces.

Superhydrophobic Biological Fluid-Repellent Surfaces: Mechanisms and Applications

Superhydrophobic biological fluid-repellent surfaces (SBFRSs) have attracted great attention in the treatment of blood and urine-related diseases because of their unique wettability and compatibility, which creates a new path for the development of medical apparatus and instruments, and are expected to create advances in various fields. Here, this review provides an up-to-date summary of research progress on the repellent mechanism and application of SBFRSs. The underlying physical and chemical principles for designing superhydrophobic surfaces are first introduced. Then, the dialectical influences of solid-liquid interactions between superhydrophobic surfaces and biological fluids on the wettability and compatibility are emphatically expounded. Subsequently, attention is drawn to the recent applications of SBFRSs in biomedical fields, such as surgical medical apparatus, implant materials, extracorporeal circulation devices, and biological fluid detection. Finally, the outlook and challenges in terms of employing SBFRSs are also discussed. This review is expected to provide a comprehensive guidance for the preparation of SBFRSs with compatibility and long-term superhydrophobic stability that is closely related to clinical applications.

Combining Topography and Chemistry to Produce Antibiofouling Surfaces: A Review

Despite decades of research on the reduction of surface fouling from biomolecules or micro-organisms, the ultimate antibiofouling surface remains undiscovered. The recent covid-19 pandemic strengthened the crucial need for such treatments. Among the numerous approaches that are able to provide surfaces with antibiofouling properties, chemical, biological, and topographical strategies have been implemented for instance in the marine, medical, or food industries. However, many of these methods have a biocidal effect and, with antibioresistance and biocide resistance a growing threat on humanity, strategies based on reducing adsorption of biomolecules and micro-organism are necessary for long-term solutions. Bioinspired strategies, combining both surface chemistry and topography, are currently at the heart of the best innovative and sustainable solutions. The synergistic effect of micro/nanostructuration, together with engineered chemical or biological functionalization is believed to contribute to the development of antibiofouling surfaces. This review aims to present approaches combining hydrophobic or hydrophilic chemistries with a specific topography to avoid biofouling in various industrial environments and healthcare facilities.

Cellulose-Based Nanomaterials Advance Biomedicine: A Review

There are various biomaterials, but none fulfills all requirements. Cellulose biopolymers have advanced biomedicine to satisfy high market demand and circumvent many ecological concerns. This review aims to present an overview of cellulose knowledge and technical biomedical applications such as antibacterial agents, antifouling, wound healing, drug delivery, tissue engineering, and bone regeneration. It includes an extensive bibliography of recent research findings from fundamental and applied investigations. Cellulose-based materials are tailorable to obtain suitable chemical, mechanical, and physical properties required for biomedical applications. The chemical structure of cellulose allows modifications and simple conjugation with several materials, including nanoparticles, without tedious efforts. They render the applications cheap, biocompatible, biodegradable, and easy to shape and process.

Biocompatible mechano-bactericidal nanopatterned surfaces with salt-responsive bacterial release

Bio-inspired nanostructures have demonstrated highly efficient mechano-bactericidal performances with no risk of bacterial resistance; however, they are prone to become contaminated with the killed bacterial debris. Herein, a biocompatible mechano-bactericidal nanopatterned surface with salt-responsive bacterial releasing behavior is developed by grafting salt-responsive polyzwitterionic (polyDVBAPS) brushes on a bio-inspired nanopattern surface. Benefiting from the salt-triggered configuration change of the grafted polymer brushes, this dual-functional surface shows high mechano-bactericidal efficiency in water (low ionic strength condition), while the dead bacterial residuals can be easily lifted by the extended polymer chains and removed from the surface in 1 M NaCl solution (high ionic strength conditions). Notably, this functionalized nanopatterned surface shows selective biocidal activity between bacterial cells sand eukaryotic cells. The biocompatibility with red blood cells (RBCs) and mammalian cells was tested in vitro. The histocompatibility and prevention of perioperative contamination activity were verified by in vivo evaluation in a rat subcutaneous implant model. This nanopatterned surface with bacterial killing and releasing activities may open new avenues for designing bio-inspired mechano-bactericidal platforms with long-term efficacy, thus presenting a facile alternative in combating perioperative-related bacterial infection. STATEMENT OF SIGNIFICANCE: Bioinspired nanostructured surfaces with noticeable mechano-bactericidal activity showed great potential in moderating drug-resistance. However, the nanopatterned surfaces are prone to be contaminated by the killed bacterial debris and compromised the bactericidal performance. In this study, we provide a dual-functional antibacterial conception with both mechano-bactericidal and bacterial releasing performances not requiring external chemical bactericidal agents. Additionally, this functionalized antibacterial surface also shows selective biocidal activity between bacteria and eukaryotic cells, and the excellent biocompatibility was tested in vitro and in vivo. The new concept for the functionalized mechano-bactericidal surface here illustrated presents a facile antibiotic-free alternative in combating perioperative related bacterial infection in practical application.

Electronic Textiles for Wearable Point-of-Care Systems

Traditional public health systems are suffering from limited, delayed, and inefficient medical services, especially when confronted with the pandemic and the aging population. Fusing traditional textiles with diagnostic, therapeutic, and protective medical devices can unlock electronic textiles (e-textiles) as point-of-care platform technologies on the human body, continuously monitoring vital signs and implementing round-the-clock treatment protocols in close proximity to the patient. This review comprehensively summarizes the research advances on e-textiles for wearable point-of-care systems. We start with a brief introduction to emphasize the significance of e-textiles in the current healthcare system. Then, we describe textile sensors for diagnosis, textile therapeutic devices for medical treatment, and textile protective devices for prevention, by highlighting their working mechanisms, representative materials, and clinical application scenarios. Afterward, we detail e-textiles' connection technologies as the gateway for real-time data transmission and processing in the context of 5G technologies and Internet of Things. Finally, we provide new insights into the remaining challenges and future directions in the field of e-textiles. Fueled by advances in chemistry and materials science, textile-based diagnostic devices, therapeutic devices, protective medical devices, and communication units are expected to interact synergistically to construct intelligent, wearable point-of-care textile platforms, ultimately illuminating the future of healthcare system in the Internet of Things era.

Production and Surface Modification of Cellulose Bioproducts

Petroleum-based synthetic plastics play an important role in our life. As the detrimental health and environmental effects of synthetic plastics continue to increase, the renewable, degradable and recyclable properties of cellulose make subsequent products the "preferred environmentally friendly" alternatives, with a small carbon footprint. Despite the fact that the bioplastic industry is growing rapidly with many innovative discoveries, cellulose-based bioproducts in their natural state face challenges in replacing synthetic plastics. These challenges include scalability issues, high cost of production, and most importantly, limited functionality of cellulosic materials. However, in order for cellulosic materials to be able to compete with synthetic plastics, they must possess properties adequate for the end use and meet performance expectations. In this regard, surface modification of pre-made cellulosic materials preserves the chemical profile of cellulose, its mechanical properties, and biodegradability, while diversifying its possible applications. The review covers numerous techniques for surface functionalization of materials prepared from cellulose such as plasma treatment, surface grafting (including RDRP methods), and chemical vapor and atomic layer deposition techniques. The review also highlights purposeful development of new cellulosic architectures and their utilization, with a specific focus on cellulosic hydrogels, aerogels, beads, membranes, and nanomaterials. The judicious choice of material architecture combined with a specific surface functionalization method will allow us to take full advantage of the polymer's biocompatibility and biodegradability and improve existing and target novel applications of cellulose, such as proteins and antibodies immobilization, enantiomers separation, and composites preparation.

pH-Responsive Smart Wettability Surface with Dual Bactericidal and Releasing Properties

Biomaterial-associated infections caused by pathogenic bacteria have important implications on human health. This study presents the design and preparation of a smart surface with pH-responsive wettability. The smart surface exhibited synergistic antibacterial function, with high liquid repellency against bacterial adhesion and highly effective bactericidal activity. The wettability of the surface can switch reversibly between superhydrophobicity and hydrophobicity in response to pH; this controls bacterial adhesion and release. Besides, the deposited silver nanoparticles of the surface were also responsible for bacterial inhibition. Benefiting from the excellent liquid repellency, the surface could highly resist bacterial adhesion after immersing in a bacterial suspension for 10 s (85%) and 1 h (71%). Adhered bacteria can be easily eliminated using deposited silver nanoparticles during the subsequent treatment of alkaline bacterial suspension, and the ratio of deactivated bacteria was above 75%. After the pH returned to neutral, the deactivated bacteria can be easily released from the surface. This antibacterial surface showed an improved bacterial removal efficiency of about 99%. The results shed light on future antibacterial applications of the smart surface combining both bactericidal and adhesion-resistant functionalities.

Synergistic Photodynamic and Photothermal Antibacterial Activity of In Situ Grown Bacterial Cellulose/MoS2-Chitosan Nanocomposite Materials with Visible Light Illumination

Owing to the rise in prevalence of multidrug-resistant pathogens attributed to the overuse of antibiotics, infectious diseases caused by the transmission of microbes from contaminated surfaces to new hosts are an ever-increasing threat to public health. Thus, novel materials that can stem this crisis, while also functioning via multiple antimicrobial mechanisms so that pathogens are unable to develop resistance to them, are in urgent need. Toward this goal, in this work, we developed in situ grown bacterial cellulose/MoS₂-chitosan nanocomposite materials (termed BC/MoS₂-CS) that utilize synergistic membrane disruption and photodynamic and photothermal antibacterial activities to achieve more efficient bactericidal activity. The BC/MoS₂-CS nanocomposite exhibited excellent antibacterial efficacy, achieving 99.998% (4.7 log units) and 99.988% (3.9 log units) photoinactivation of Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus, respectively, under visible-light illumination (xenon lamp, 500 W, λ ≥ 420 nm, and 30 min). Mechanistic studies revealed that the use of cationic chitosan likely facilitated bacterial membrane disruption and/or permeability, with hyperthermia (photothermal) and reactive oxygen species (photodynamic) leading to synergistic pathogen inactivation upon visible-light illumination. No mammalian cell cytotoxicity was observed for the BC/MoS₂-CS membrane, suggesting that such composite nanomaterials are attractive as functional materials for infection control applications.

Antibacterial Photodynamic Gold Nanoparticles for Skin Infection

Damage or injury to the skin creates wounds that are vulnerable to bacterial infection, which in turn retards the process of skin regeneration and wound healing. In patients with severe burns and those with chronic diseases, such as diabetes, skin infection by multidrug-resistant bacteria can be lethal. Therefore, a broad-spectrum therapy to effectively eradicate bacterial infection through a mechanism different from that of antibiotics is much sought after. We successfully synthesized antibacterial photodynamic gold nanoparticles (AP-AuNPs), which are self-assembled nanocomposites of an antibacterial photodynamic peptide and poly(ethylene glycol) (PEG)-stabilized AuNPs. The AP-AuNPs exhibited aqueous and light stability, a satisfactory generation of reactive oxygen species (ROS), and a remarkable antibacterial effect toward both Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli upon light irradiation. Moreover, the synthesized nanocomposites significantly inhibited bacterial growth and biofilm formation in vitro. Photodynamic antibacterial treatment accelerated the wound-healing rate in S. aureus infections, mimicking staphylococcal skin infections. Using a combination of the bactericidal effect of a peptide, the photodynamic effect of a photosensitizer, and the multivalency clustering on AuNPs for maximal antibacterial effect under light irradiation, we synthesized AP-AuNPs as a wound-dressing nanomaterial in skin infections to promote wound healing. Our findings indicate a promising strategy in the management of bacterial infections resulting from damaged skin tissue, an aspect that has not been fully explored by our peers.

Bacteria Adhesion of Textiles Influenced by Wettability and Pore Characteristics of Fibrous Substrates

Bacteria adhesion on the surface is an initial step to create biofouling, which may lead to a severe infection of living organisms and humans. This study is concerned with investigating the textile properties including wettability, porosity, total pore volume, and pore size in association with bacteria adhesion. As model bacteria, Gram-negative, rod-shaped Escherichia coli and the Gram-positive, spherical-shaped Staphylococcus aureus were used to analyze the adhesion tendency. Electrospun webs made from polystyrene and poly(lactic acid) were used as substrates, with modification of wettability by the plasma process using either O2 or C4F8 gas. The pore and morphological characteristics of fibrous webs were analyzed by the capillary flow porometer and scanning electron microscopy. The substrate's wettability appeared to be the primary factor influencing the cell adhesion, where the hydrophilic surface resulted in considerably higher adhesion. The pore volume and the pore size, rather than the porosity itself, were other important factors affecting the bacteria adherence and retention. In addition, the compact spatial distribution of fibers limited the cell intrusion into the pores, reducing the total amount of adherence. Thus, superhydrophobic textiles with the reduced total pore volume and smaller pore size would circumvent the adhesion. The findings of this study provide informative discussion on the characteristics of fibrous webs affecting the bacteria adhesion, which can be used as a fundamental design guide of anti-biofouling textiles.

Superhydrophobic, photo-sterilize, and reusable mask based on graphene nanosheet-embedded carbon (GNEC) film

The 2019 coronavirus disease (COVID-19) has affected more than 200 countries. Wearing masks can effectively cut off the virus spreading route since the coronavirus is mainly spreading by respiratory droplets. However, the common surgical masks cannot be reused, resulting in the increasing economic and resource consumption around the world. Herein, we report a superhydrophobic, photo-sterilize, and reusable mask based on graphene nanosheet-embedded carbon (GNEC) film, with high-density edges of standing structured graphene nanosheets. The GNEC mask exhibits an excellent hydrophobic ability (water contact angle: 157.9°) and an outstanding filtration efficiency with 100% bacterial filtration efficiency (BFE). In addition, the GNEC mask shows the prominent photo-sterilize performance, heating up to 110 °C quickly under the solar illumination. These high performances may facilitate the combat against the COVID-19 outbreaks, while the reusable masks help reducing the economic and resource consumption.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material (further details of electron cyclotron resonance (ECR) sputtering system, deposition of GNEC film, fabrication of GNEC mask, and characterization of the GNEC mask) is available in the online version of this article at 10.1007/s12274-020-3158-1.

Synergistic Coating Strategy Combining Photodynamic Therapy and Fluoride-Free Superhydrophobicity for Eradicating Bacterial Adhesion and Reinforcing Corrosion Protection

Device-associated infection is one of the significant challenges in the biomedical industry and clinical management. Controlling the initial attachment of microbes upon the solid surface of biomedical devices is a sound strategy to minimize the formation of biofilms and infection. A synergistic coating strategy combining superhydrophobicity and bactericidal photodynamic therapy is proposed herein to tackle infection issues for biomedical materials. A multifunctional coating is produced upon pure Mg substrate through a simple blending procedure without involvement of any fluoride-containing agents, differing from the common superhydrophobic surface preparations. Superhydrophobic features of the coating are confirmed through water contact angle measurements (152.5 ± 1.9°). In vitro experiments reveal that bacterial-adhesion repellency regarding both Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) strains approaches over 96%, which is evidently ascribed to the proposed synergistic strategy, that is, superhydrophobic nature and microbicidal ability of photodynamic therapy. Electrochemical analysis indicates that the superhydrophobic coating provides pronounced protection against corrosion to underlying Mg with 80% reduction in the corrosion rate in minimum essential medium and retains the original surface features after 168 h exposure to neutral salt spray. The proof-of-concept research holds a great promise for tackling the notorious bacterial infection and poor corrosion resistance of Mg-based biodegradable materials in a simple, efficient, and environmentally benign manner.

Facile Fabrication of Silicon(IV)Phthalocyanine-Embedded Poly(vinyl alcohol)-Based Antibacterial and Antifouling Interfaces

Interest in the photodynamic inactivation of bacteria as an alternative method to antibiotic treatment continues to grow. Based on this approach, light-activated anti-infective interfaces could be fabricated via incorporation of photosensitizers into the polymer-based materials. In order to combine photobactericidal and antifouling functions, the choice of the carrier polymer is of particular significance: it should enable fast and effective conjugation of photosensitizer and reduce the formation of bioburden on the artificial material in a biological environment. This study reports one-pot fabrication and characterization of two silicon(IV)phthalocyanine /poly(vinyl alcohol)-based electrospun mats. The method relies on the thermal cross-linking of components by esterification using sebacic acid as a cross-linking agent. Fabricated flexible mats showed photosensitizer-dependent antibacterial photoactivity against different Gram-positive bacteria with low cytotoxic effects on human fibroblasts and were effective against bacterial attachment, as an early step toward future biofilm formation. This work provides practical guidelines in developing photoactive materials and interfaces that can be used in nonadhesive wound dressings, food packaging, water, and air filtration.

Poly(γ-glutamic acid)-based electrospun nanofibrous mats with photodynamic therapy for effectively combating wound infection

Pathogenic bacterial infections associated with wound healing progress usually result in serious complications. Herein, biocompatible and antimicrobial electrospun nanofibrous mats with photodynamic therapy (PDT) effect were fabricated to accelerate the infected wound healing. The nanofibrous mats were fabricated by co-electrospining of polyanionic poly(γ-glutamic acid) (γ-PGA) and cationic photosensitizer 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin tetra (p-toluenesulfonate) (TMPyP) in aqueous solution and stabilized by the chemical crosslinking. The as-prepared nanofibrous mats can not only confer the moist microenvironment to the wound bed, but also provide potent bactericidal activity upon visible light irradiation by releasing the cytotoxic reactive oxygen species (ROS). The antibacterial assay in vitro showed that they can effectively eradicate the board-spectrum bacteria at a relatively low loading dose of TMPyP (e.g., 0.1 wt%). Meanwhile, those nanofibrous mats showed good biocompatibility with no obvious adverse effects on mammalian cells and red blood cells (RBCs). The animal test in vivo suggested that the restrained inflammatory reaction and better wound healing could be achieved upon timely and effective antibacterial treatment with negligible local toxicities. This biocompatible and antibacterial γ-PGA-TMPyP nanofibrous mat may show great potential in practical infection-resistant applications, particularly for wound dressing applications.

Antibacterial Coatings for Improving the Performance of Biomaterials

Biomedical devices have become essential in the health care. Every day, an enormous number of these devices are used or implanted in humans. In this context, the bacterial contamination that could be developed in implanted devices is critical since it is estimated that infections kill more people than other medical causes. Commonly, these infections are treated with antibiotics, but the biofilm formation on implant surfaces could significantly reduce the effectiveness of these antibiotics since bacteria inside the biofilm is protected from the drug. In some cases, a complete removal of the implant is necessary in order to overcome the infection. In this context, antibacterial coatings are considered an excellent strategy to avoid biofilm formation and, therefore, mitigate the derived complications. In this review, the main biomaterials used in biomedical devices, the mechanism of biofilm formation, and the main strategies for the development of antibacterial coatings, are reviewed. Finally, the main polymer-based strategies to develop antibacterial coatings are summarized, with the aim of these coatings being to avoid the bacteria proliferation by controlling the antibacterial mechanisms involved and enhancing long-term stability.

Synergistic Photodynamic and Photothermal Antibacterial Nanocomposite Membrane Triggered by Single NIR Light Source

Herein, we developed a nanocomposite membrane with synergistic photodynamic therapy and photothermal therapy antibacterial effects, triggered by a single near-infrared (NIR) light illumination. First, upconversion nanoparticles (UCNPs) with a hierarchical structure (UCNPs@TiO₂) were synthesized, which use NaYF₄:Yb,Tm nanorods as the core and TiO₂ nanoparticles as the outer shell. Then, nanosized graphene oxide (GO), as a photothermal agent, was doped into UCNPs@TiO₂ core-shell nanoparticles to obtain UCNPs@TiO₂@GO. Afterward, the mixture of UCNPs@TiO₂@GO in poly(vinylidene) fluoride (PVDF) was applied for electrospinning to generate the nanocomposite membrane (UTG-PVDF). Generation of reactive oxygen species (ROS) and changes of temperature triggered by NIR action were both investigated to evaluate the photodynamic and photothermal properties. Upon a single NIR light (980 nm) irradiation for 5 min, the nanocomposite membrane could simultaneously generate ROS and moderate temperature rise, triggering synergistic antibacterial effects against both Gram-positive and -negative bacteria, which are hard to be achieved by an individual photodynamic or photothermal nanocomposite membrane. Additionally, the as-prepared membrane can effectively restrain the inflammatory reaction and accelerate wound healing, thus exhibiting great potentials in treating infectious complications in wound healing progress.

Povidone-iodine-functionalized fluorinated copolymers with dual-functional antibacterial and antifouling activities

Povidone-iodine-functionalized fluorinated polymer coatings with dual-functional antibacterial and antifouling activities should be very promising in practical biomedical applications.