Hydrophilic/Hydrophobic Heterogeneity Anti-Biofouling Hydrogels with Well-Regulated Rehydration

Solvent-Triggered, Ultra-Adhesive, Conductive, and Biocompatible Transition Gels for Wearable Devices

The development of robust adhesive, conductive, and flexible materials has garnered significant attention in the realm of human-machine interface and electronic devices. Conventional preparation methods to achieve these exceptional properties rely on incorporating highly polar raw materials, multiple components, or solvents. However, the overexposure of functional groups and the inherent toxicity of organic solvents often render gels non-stick or potentially biocompatible making them unsuitable for human-contact devices. In this study, a straightforward three-step strategy is devised for preparing responsive adhesive gels without complex components. Structurally conductive poly(N-(2-hydroxyethyl)-acrylamide-co-p-styrene sulfonate hydrate) (PHEAA-NaSS) gels are synthesized by integrating ionic and hydrophilic networks with distinct solvent effects. Initially, the in-suit formed PHEAA-NaSS networks are activated by dimethyl sulfoxide, which substantially increases intramolecular hydrogen bonding and enhances the matrix stretchability and interfacial adhesion. Subsequently, ethanol exchange reduced solvent impact and led to a compact network that limited surface exposure of ionic and hydrophilic groups, resulting in nonstick, robust for convenient storage. Finally, upon contacting with water, the network demonstrates rehydration, resulting in favorable adhesion, biocompatibility, and conductivity. The proposed PHEAA-NaSS/W gels can stably and reliably capture joint motion and electrophysiological signals. Furthermore, this uncomplicated gel preparation method is also applicable to other electrolyte monomers.

A hydrogel optical fibre sensor for rapid on-site ethanol determination

Ethanol plays a critical role in the modern chemical industry, food production, and medical research. Given its wide applications, the detection of ethanol concentration is very necessary. In this paper, a fibre device for rapid ethanol detection is proposed. The sensing head was fabricated with multimode fibre. The hydrogel was photo-cured on the fibre tip from polyethylene glycol diacrylate (PEGDA). In the hydrogel, rhodamine 6G (R6G) was immobilized as the fluorescent indicator. The sensor was designed based on the swelling behaviour of the hydrogel in liquid. The transparency of the hydrogel was modulated by the component of the water-ethanol mixture, thus, the fluorescence intensity of R6G was monitored for the determination of ethanol. Within the range of 0-62.2 vol%, the detection limit (LOD) was 0.4 vol%. A detailed comparison with other detection methods showed that the proposed sensor has the advantages of being single-ended, low LOD, cost-effective, and easy to prepare. It has great potential for on-site ethanol detection applications.

Highly Adhesive and Self-Healing Zwitterionic Hydrogels as Antibacterial Coatings for Medical Devices

Bacterial infection of medical devices has caused incalculable losses to maintenance costs and health care. A single coating with antibacterial function cannot guarantee the long-term use of the device, because the coating will be damaged and fall off during reuse. To solve this problem, the development of coatings with high adhesion and self-healing ability is a wise direction. In this paper, a multifunctional polyzwitterionic antibacterial hydrogel coating (PZG) composed of amphozwitterion monomer, anionic monomer, and quaternary ammonium cationic monomer was synthesized by dipping UV photoinitiated polymerization. The structure of PZGs was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. Ascribing to the hydrogel internal electrostatic interaction, hydrogen bond, and cation-π interaction, the obtained PZGs exhibited high ductility (>1200% strain) and appropriate strength (>189 kPa). Remarkably, PZGs could also adhere firmly on different substrates through noncovalent interaction, and their adhesion could be controlled by adjusting the amount of zwitterionic. Reversible physical interactions in polymer networks endowed hydrogels with excellent self-healing properties. In addition, PZGs exhibit good antibacterial activity and biocompatibility due to the synergistic effect of quaternary ammonium cation and amphozwitterion monomer. This work provides a multifunctional antibacterial coating for medical equipment and has broad application prospects in the biomedical field.

Impact of the physical properties of contact lens materials on the discomfort: role of the coefficient of friction

Contact Lens Discomfort (CLD) is the main cause in contact lens (CLs) discontinuation, referred in literature as drop-out phenomenon. Despite such evidence was reported in several clinical studies, a relationship between physico-chemical properties of CLs and CLD is not still totally understood. In this regard, the friction of CLs surfaces seems to be related to discomfort feeling events, probably due to an alteration of the lubricate function of the tear film after the CL placement inside the ocular environment. In the last years, many studies have been finalized to the friction measurements of CLs surface, finding conflicting data due to a lack in standardized protocol. The aim of this review is primarily to show evident relationships between CLs surface properties (i.e. wettability, tear evaporation, tear film quality, etc.) and the coefficient of friction (CoF), resulting therefore the most relevant physical quantity in the CLs characterization. In addition, we reported the most recent studies in CLs tribology, which highlight that the introduction of a standard protocol in CoF measurements is necessary to obtain reproducible results, considering the aim to evaluate in a more precise way the relationship between this material surface property and comfort in CLs users.

A Facile Strategy to Construct Anti-Swelling, Antibacterial, and Antifogging Coatings for Protection of Medical Goggles

During the COVID-19 (Corona Virus Disease 2019) pandemic, traditional medical goggles are not only easy to attach bacteria and viruses in long-term exposure, but easy to fogged up, which increases the risk of infection and affects productivity. Bacterial adhesion and fog can be significantly inhibited through the hydrogel coatings, owing to super hydrophilic properties. On the one hand, hydrogel coatings are easy to absorb water and swell in wet environment, resulting in reduced mechanical properties, even peeling off. On the other hand, the hydrogel coatings don't have intrinsic antibacterial properties, which still poses a potential risk of bacterial transmission. Herein, an anti-swelling and antibacterial hydrogel coating is synthesized by 2-hydroxyethyl methacrylate (HEMA), acrylamide (AM), dimethylaminoethyl acrylate bromoethane (IL-Br), and poly(sodium-p-styrenesulfonate) (PSS). Due to the self-driven entropy reduction effect of polycation and polyanion, an ion cross-linking network is formed, which endows the hydrogel coating with excellent antiswelling performance. Moreover, because of the synergistic effect of highly hydrated surfaces and the active bactericidal effect from quaternary ammonium cations, the hydrogel coating exhibits outstanding antifouling performances. This work develops a facile strategy to fabricate anti-swelling, antifouling, and antifogging hydrogel coatings for the protection of medical goggles, and also for biomedical and marine antifouling fields.

A 3D phytic acid cross-linked high-porous conductive hydrogel integrating g-C3N4 for electrochemical multiplex sensing of heavy metal ions

It is a great challenge to develop an effective super-sensitive capture method for multiplex heavy metal ions (HMIs), because HMIs is extremely toxic to public health and the environment, what's more their contamination is usually multiplex ions pollution. In this work, a 3D high-porous conductive polymer hydrogel was designed and prepared with high-stable and easy mass production, which is very favorable for the industrialization. The polymer hydrogel (g-C₃N₄-P(Ani-Py)-PAAM) was formed from the mixture of aniline pyrrole copolymer and acrylamide cross-linked with phytic acid as dopant and cross-linker and integrated with g-C₃N₄. The 3D networked high-porous hydrogel not only exhibits excellent electrical conductivity, but also provides a large surface area for increasing the number of immobilized ions. Importantly, the 3D high-porous conductive polymer hydrogel was applied successfully in electrochemical multiplex sensing of HIMs. The prepared sensor used differential pulse anodic stripping voltammetry exhibited high sensitivities, low detection limit and wide detection ranges for Cd²⁺, Pb²⁺, Hg²⁺ and Cu²⁺, respectively. Moreover, the sensor showed a high accuracy in lake water test. The preparation and application of the hydrogel in electrochemical sensor provided an availability strategy to capture and detect the various HMIs by electrochemistry in solution and has great commercial application prospect.

Wide-Humidity Range Applicable, Anti-Freezing, and Healable Zwitterionic Hydrogels for Ion-Leakage-Free Iontronic Sensors

Hydrogels have entered the spotlight for applications in soft electronics. It is essential and challenging to obtain hydrogels that can function properly under varying environmental circumstances, that is, 30-90% relative humidity (RH) and -20 to 40 °C due to their intrinsic nature to lose and absorb water upon variations in humidity and temperature. In this work, a green solvent, solketal, is introduced into poly 3-dimethyl-2-(2-methylprop-2-enoyloxy)ethyl azaniumyl propane-1-sulfonate (poly(DMAPS)) zwitterionic hydrogels. Compared to glycerol, solketal endows hydrogels with greater possibility for further modification as well as improved water content and mechanical performance consistency over 30-90% RH. Encouragingly, the optimized hydrogel demonstrates its unique merits as a dielectric layer in iontronic sensors, featuring non-leaky ions, high sensitivity (1100 kPa^-1 ), wide humidity, and temperature range applicability. A wide-humidity range healable and stretchable electrode is attained by combining the hydrogel substrate with Ag paste. A full-device healable and highly-sensitive sensor is developed. This study is a pioneering work that tackles the broad humidity range applicability issue of hydrogels, and demonstrates the ion-leakage-free ionic skins with zwitterionic dielectrics. The outcomes of the study will considerably promote advancements in the fields of hydrogel electronics and iontronic sensors.

Extreme-environment-adapted eutectogel mediated by heterostructure for epidermic sensor and underwater communication

In recent years, gel-based ion conductor has been widely considered in wearable electronics because of the favorable flexibility and conductivity. However, it is of vital importance, yet rather challenging to adapt the gel for underwater and dry conditions. Herein, an anti-swelling and anti-drying, intrinsic conductor eutectogel is designed via a one-step radical polymerization of acrylic acid and 2, 2, 2‑trifluoroethyl methacrylate in binary deep eutectic solvents (DESs) medium. On the one hand, the synergistic effects of hydrophilic/hydrophobic heteronetworks can elicit the integrity stability of eutectogel in liquid environment. It is proved that both the mechanical property and conductivity are maintained after immersing in different salt, alkaline and acid solution and organic solvent for one month. On the other hand, the eutectogel inherits well conductivity (93 mS/m), anti-drying and antibacterial properties from DESs. Based on the above features, the resulting eutectogel can be assembled as smart sensor for stable information transmission in air and underwater with fast response time (1 s), high sensitivity (Gauge factor = 1.991) and long-time reproducibility (500 cycles, 70 % strain). Considering the simple preparation and integration of multiple functions, the binary cooperative complementary principle can provide insights into the development of next-generation conductive soft materials.

Wetting-Enabled Three-Dimensional Interfacial Polymerization (WET-DIP) for Bioinspired Anti-Dehydration Hydrogels

Anti-dehydration hydrogels have attracted considerable attention due to their promising applications in stretchable sensors, flexible electronics, and soft robots. However, anti-dehydration hydrogels prepared by conventional strategies inevitably depend on additional chemicals or suffer from cumbersome preparation processes. Here, inspired by the succulent Fenestraria aurantiaca a one-step wetting-enabled three-dimensional interfacial polymerization (WET-DIP) strategy for constructing organogel-sealed anti-dehydration hydrogels is developed. By virtue of the preferential wetting on the hydrophobic-oleophilic substrate surfaces, the organogel precursor solution can spread on the three-dimensional (3D) surface and encapsulate the hydrogel precursor solution, forming anti-dehydration hydrogel with 3D shape after in situ interfacial polymerization. The WET-DIP strategy is simple and ingenious, and accessible to discretionary 3D-shaped anti-dehydration hydrogels with a controllable thickness of the organogel outer layer. Strain sensors based on this anti-dehydration hydrogel also exhibit long-term stability in signal monitoring. This WET-DIP strategy shows great potentialities for constructing hydrogel-based devices with long-term stability.

In Vivo Chronic Brain Cortex Signal Recording Based on a Soft Conductive Hydrogel Biointerface

In neuroscience, the acquisition of neural signals from the brain cortex is crucial to analyze brain processes, detect neurological disorders, and offer therapeutic brain-computer interfaces. The design of neural interfaces conformable to the brain tissue is one of today's major challenges since the insufficient biocompatibility of those systems provokes a fibrotic encapsulation response, leading to an inaccurate signal recording and tissue damage precluding long-term/permanent implants. The design and production of a novel soft neural biointerface made of polyacrylamide hydrogels loaded with plasmonic silver nanocubes are reported herein. Hydrogels are surrounded by a silicon-based template as a supporting element for guaranteeing an intimate neural-hydrogel contact while making possible stable recordings from specific sites in the brain cortex. The nanostructured hydrogels show superior electroconductivity while mimicking the mechanical characteristics of the brain tissue. Furthermore, in vitro biological tests performed by culturing neural progenitor cells demonstrate the biocompatibility of hydrogels along with neuronal differentiation. In vivo chronic neuroinflammation tests on a mouse model show no adverse immune response toward the nanostructured hydrogel-based neural interface. Additionally, electrocorticography acquisitions indicate that the proposed platform permits long-term efficient recordings of neural signals, revealing the suitability of the system as a chronic neural biointerface.

Strong Anchoring of Hydrogels through Superwetting-Assisted High-Density Interfacial Grafting

Strong adhesion of hydrogels on solids plays an important role in stable working for various practical applications. However, current hydrogel adhesion suffers from poor interfacial bonding with solid surfaces. Here, we propose a general superwetting-assisted interfacial polymerization (SAIP) strategy to robustly anchor hydrogels onto solids by forming high-density interfacial covalent bonds. The key of our strategy is to make the initiator fully contact solid surfaces via a superwetting way for enhancing the interfacial grafting efficiency. The designed anchored hydrogels show strong bulk failure with a high breaking strength of ≈1.37 MPa, different from weak interfacial failure that occurs in traditional strategies. The strong interfacial adhesion greatly enhances the stability of hydrogels against swelling destruction. This work opens up new inspirations for designing strongly anchored hydrogels from an interfacial chemistry perspective.

Construction and Ion Transport-Related Applications of the Hydrogel-Based Membrane with 3D Nanochannels

Hydrogel is a type of crosslinked three-dimensional polymer network structure gel. It can swell and hold a large amount of water but does not dissolve. It is an excellent membrane material for ion transportation. As transport channels, the chemical structure of hydrogel can be regulated by molecular design, and its three-dimensional structure can be controlled according to the degree of crosslinking. In this review, our prime focus has been on ion transport-related applications based on hydrogel materials. We have briefly elaborated the origin and source of hydrogel materials and summarized the crosslinking mechanisms involved in matrix network construction and the different spatial network structures. Hydrogel structure and the remarkable performance features such as microporosity, ion carrying capability, water holding capacity, and responsiveness to stimuli such as pH, light, temperature, electricity, and magnetic field are discussed. Moreover, emphasis has been made on the application of hydrogels in water purification, energy storage, sensing, and salinity gradient energy conversion. Finally, the prospects and challenges related to hydrogel fabrication and applications are summarized.

Synthesis and Properties of Self-Polishing Antifouling Coatings Based on BIT-Acrylate Resins

Painting antifouling coatings is one of the most important methods to prevent marine biofouling. Acrylic resin is widely used in marine antifouling because of its excellent stickiness, water resistance, and film-forming capabilities. At present, the widely used acrylate antifouling coatings require a high concentration of cuprous oxide as antifoulant. The release and accumulation of copper ions are the main factors affecting the marine environment. In this study, BIT–allyl methacrylate (BM) and zinc acrylate (ZM) were selected as functional monomers copolymerized with methyl methacrylate (MMA) and butyl acrylate (BA) to prepare a series of BIT acrylate antifouling resins. The inhibitory effects of all resins against marine bacteria (S. aureus, V. coralliilyticus, and V. parahaemolyticus), marine algae (Chlorella, I. galbana, and C. curvisetus), and barnacle larvae were studied. Moreover, marine field tests on the BIT modified resin in coastal waters were conducted. The results demonstrate that the grafted BIT–zinc acrylate resin not only exhibits excellent antifouling properties but also a significant self-polishing performance, providing a novel strategy to design a long-term antifouling resin with stable antifoulant release.

Chitosan-enhanced nonswelling hydrogel with stable mechanical properties for long-lasting underwater sensing

Existing anti-swelling hydrogels with poor mechanical strength restrict their underwater human monitoring as wearable electronic sensing equipment. Herein, a nonswelling double network (DN) hydrogel with strong self-recoverability (97.22%) was developed by adding chitosan (CS) to poly(acrylic acid-2-methoxyethyl acrylate)-Fe³⁺ [P(AA-MEA)-Fe] network. Owing to the introduction of CS, the hydrogel displayed excellent nonswelling properties under aqueous solutions (pH = 1, 4 and 7), physiological saline, seawater, dodecane, n-hexane and chloroform. Besides, CS improved mechanical properties of hydrogel through non-covalent network (large stretchability of 1199%, tensile strength of 0.462 MPa and toughness of 2.01 MJ/m³). Surprisingly, the hydrogel still reached the extensibility (1072%) and tensile stress (0.467 MPa) even after immersing in water for 7 days. Fabricating hydrogel as flexible strain sensor, periodic real-time signals of human movements (e.g., joint actions and electronic skin touching) were accurately monitored under the water and seawater. The nonswelling P(AA-MEA)-CS-Fe hydrogel shows huge potential in underwater sensing.

Effective Antifogging Coating from Hydrophilic/Hydrophobic Polymer Heteronetwork

Fogging on optical devices may severely impair vision, resulting in unacceptable adverse consequences. Hydrophilic coatings can prevent surface fogging by instantly facilitating pseudo-film water condensation but suffer from short antifogging duration due to water film thickening with further condensation. Here, an innovative strategy is reported to achieve longer antifogging duration via thickening the robust bonded hydrophilic/hydrophobic polymer heteronetwork coating to enhance its water absorption capacity. The combination of strong interfacial adhesion and hydrophilic/hydrophobic heteronetwork structure is key to this approach, which avoids interfacial failure and swelling-induced wrinkles under typical fogging conditions. The developed antifogging coating exhibits prolonged antifogging durations over a wide temperature range for repetitious usages. Eyeglasses coated with this coating successfully maintained fog-free vision in two typical scenarios. Besides, the coating recipes developed in this study also have potential as underwater glues as they demonstrate strong adhesions to both glass and polymer substrates in wet conditions.

One-pot method for preparation of capsaicin-containing double-network hydrogels for marine antifouling

Marine biofouling which interferes with normal marine operation and also causes huge economic loss has become a worldwide problem. With the development of society, there is an urgent need to develop non-toxic and efficient anti-fouling strategies. Capsaicin is an environmentally friendly antifouling agent, but controlling the stable release of capsaicin from the coating is still a challenge to be solved. To achieve long-lasting antifouling property, in this work, we incorporate a derivative of capsaicin N-(4-hydroxy-3-methoxybenzyl)acrylamide (HMBA) to prepare double network (DN) hydrogels and make HMBA a part of the polymer network. Polyvinyl alcohol (PVA) has good hydrophilicity, and as a soft and ductile network, acrylamide (AM) and HMBA can polymerize to generate a rigid and brittle network. By adjusting the content of HMBA in the DN hydrogels, we can obtain a PVA–PAHX hydrogel with high mechanical strength, low swelling rate, and excellent antifouling effect, which provides a feasible way for the practical application of a hydrogel coating in long-term marine antifouling.

Double-network hydrogel coatings containing capsaicin analogs were prepared by a one-pot method based on a green strategy, by incorporating a derivative of capsaicin N-(4-hydroxy-3-methoxybenzyl) acrylamide into the polymer network. An antifouling effect can be achieved.

Anti-Biofouling Polymers with Special Surface Wettability for Biomedical Applications

The use of anti-biofouling polymers has widespread potential for counteracting marine, medical, and industrial biofouling. The anti-biofouling action is usually related to the degree of surface wettability. This review is focusing on anti-biofouling polymers with special surface wettability, and it will provide a new perspective to promote the development of anti-biofouling polymers for biomedical applications. Firstly, current anti-biofouling strategies are discussed followed by a comprehensive review of anti-biofouling polymers with specific types of surface wettability, including superhydrophilicity, hydrophilicity, and hydrophobicity. We then summarize the applications of anti-biofouling polymers with specific surface wettability in typical biomedical fields both in vivo and in vitro, such as cardiology, ophthalmology, and nephrology. Finally, the challenges and directions of the development of anti-biofouling polymers with special surface wettability are discussed. It is helpful for future researchers to choose suitable anti-biofouling polymers with special surface wettability for specific biomedical applications.

Tailoring Materials with Specific Wettability in Biomedical Engineering

As a fundamental feature of solid surfaces, wettability is playing an increasingly important role in our daily life. Benefitting from the inspiration of biological paradigms and the development in manufacturing technology, numerous wettability materials with elaborately designed surface topology and chemical compositions have been fabricated. Based on these advances, wettability materials have found broad technological implications in various fields ranging from academy, industry, agriculture to biomedical engineering. Among them, the practical applications of wettability materials in biomedical-related fields are receiving remarkable researches during the past decades because of the increasing attention to healthcare. In this review, the research progress of materials with specific wettability is discussed. After briefly introducing the underlying mechanisms, the fabrication strategies of artificial materials with specific wettability are described. The emphasis is put on the application progress of wettability biomaterials in biomedical engineering. The prospects for the future trend of wettability materials are also presented.

The effects of surface topography modification on hydrogel properties

Hydrogel has been an attractive biomaterial for tissue engineering, drug delivery, wound healing, and contact lens materials, due to its outstanding properties, including high water content, transparency, biocompatibility, tissue mechanical matching, and low toxicity. As hydrogel commonly possesses high surface hydrophilicity, chemical modifications have been applied to achieve the optimal surface properties to improve the performance of hydrogels for specific applications. Ideally, the effects of surface modifications would be stable, and the modification would not affect the inherent hydrogel properties. In recent years, a new type of surface modification has been discovered to be able to alter hydrogel properties by physically patterning the hydrogel surfaces with topographies. Such physical patterning methods can also affect hydrogel surface chemical properties, such as protein adsorption, microbial adhesion, and cell response. This review will first summarize the works on developing hydrogel surface patterning methods. The influence of surface topography on interfacial energy and the subsequent effects on protein adsorption, microbial, and cell interactions with patterned hydrogel, with specific examples in biomedical applications, will be discussed. Finally, current problems and future challenges on topographical modification of hydrogels will also be discussed.

Nickel-Catcher-Doped Zwitterionic Hydrogel Coating on Nickel-Titanium Alloy Toward Capture and Detection of Nickel Ions

Nickel-titanium (NiTi) alloys show broad applicability in biomedical fields. However, the unexpected aggregation of bacteria and the corrosion of body fluid on NiTi-based medical devices often lead to the leakage of nickel ions, resulting in inevitable allergic and cytotoxic activities. Therefore, the capture and detection of nickel ions are important to avoid serious adverse reactions caused by NiTi-based medical devices. Herein, we presented a nickel ion capture strategy by the combination of zwitterionic hydrogels as anti-bacteria layers and carbon disulfide (CS₂) components as nickel-catchers (Ni-catchers). On the one hand, the hydration layer of zwitterionic hydrogel can efficiently inhibit bacteria adhesion and reduce nickel ions leakage from NiTi corrosion. On the other hand, Ni-catchers can capture leaked nickel ions from NiTi alloy actively by chelation reaction. Therefore, this strategy shows great capabilities in resisting bacteria adhesion and capturing nickel ions, providing the potential possibility for the detection of nickel ion leakage for implantable biomedical materials and devices.

Decoupling of Mechanical Strength and Ionic Conductivity in Zwitterionic Elastomer Gel Electrolyte toward Safe Batteries

Quasi-solid state electrolyte is one of the promising options for next generation batteries due to its superiority on safety and electrochemistry performance. However, the trade-off between the electrolyte swelling ratio and mechanical property of the quasi-solid state electrolyte significantly influences the battery performance. Herein, we design a nonswelling, solvent-adaptive polymer gel composed of oleophobic zwitterion poly(3-(1-vinyl-3-imidazolio)-propanesulfonate) and oleophilic elastomer poly(2-methoxyethyl acrylate) segments to retain high battery performance without sacrificing the mechanical property in lithium batteries. The as-designed gel can not only uptake enough electrolyte for a high ionic conductivity of 1.78 mS cm^-1 but also achieve excellent mechanical strength with compression stress at 90% strain (σ_0.9) reaching 5.8 MPa after long time soaking for battery safety due to its nonswelling property in ester electrolyte. Moreover, the as-prepared zwitterionic gel is beneficial to electrolyte salt dissociation, which further enhances the ionic conductivity and transference number of batteries. Consequently, the gel electrolyte can cycle for more than 500 h under a high current density of 3 mA cm^-2 on dendrite inhibition performance, and when assembled with LiFePO₄ as a cathode, the battery demonstrates a reversible specific capacity as high as 70 mAh g^-1 under a high current density of 5 C after 300 cycles. The rational designed solvophilic/solvophobic zwitterionic elastomers provide a guidance for engineering quasi-solid state electrolytes of different solvents with broad applications on flexible devices.