Bioinspired Omniphobic Coatings with a Thermal Self-Repair Function on Industrial Materials

Design, fabrication, and applications of bioinspired slippery surfaces

Bioinspired slippery surfaces (BSSs) have attracted considerable attention owing to their antifouling, drag reduction, and self-cleaning properties. Accordingly, various technical terms have been proposed for describing BSSs based on specific surface characteristics. However, the terminology can often be confusing, with similar-sounding terms having different meanings. Additionally, some terms fail to fully or accurately describe BSS characteristics, such as the surface wettability of lubricants (hydrophilic or hydrophobic), surface wettability anisotropy (anisotropic or isotropic), and substrate morphology (porous or smooth). Therefore, a timely and thorough review is required to clarify and distinguish the various terms used in BSS literature. This review initially categorizes BSSs into four types: slippery solid surfaces (SSSs), slippery liquid-infused surfaces (SLISs), slippery liquid-like surfaces (SLLSs), and slippery liquid-solid surfaces (SLSSs). Because SLISs have been the primary research focus in this field, we thoroughly review their design and fabrication principles, which can also be applied to the other three types of BSS. Furthermore, we discuss the existing BSS fabrication methods, smart BSS systems, antifouling applications, limitations of BSS, and future research directions. By providing comprehensive and accurate definitions of various BSS types, this review aims to assist researchers in conveying their results more clearly and gaining a better understanding of the literature.

Permanent Anticoagulation Blood-Vessel by Mezzo-Sized Double Re-Entrant Structure

Having a permanent omniphobicity on the inner surface of the tube can bring enormous advantages, such as reducing resistance and avoiding precipitation during mass transfer. For example, such a tube can prevent blood clotting when delivering blood composed of complex hydrophilic and lipophilic compounds. However, it is very challenging to fabricate micro and nanostructures inside a tube. To overcome these, a wearability and deformation-free structural omniphobic surface is fabricated. The omniphobic surface can repel liquids by its "air-spring" under the structure, regardless of surface tension. Furthermore, it is not lost an omniphobicity under physical deformation like curved or twisted. By using these properties, omniphobic structures on the inner wall of the tube by the "roll-up" method are fabricated. Fabricated omniphobic tubes still repels liquids, even complex liquids like blood. According to the ex vivo blood tests for medical usage, the tube can reduce thrombus formation by 99%, like the heparin-coated tube. So, it is believed the tube can be soon replaced typical coating-based medical surfaces or anticoagulation blood vessel.

Recent advances of slippery liquid-infused porous surfaces with anti-corrosion

Metal materials are susceptible to the influence of environmental media, and chemical or electrochemical multiphase reactions occur on the metal surface, resulting in the corrosion of metal materials, which can directly damage the geometry and reduce the physical properties of metal materials. This corrosion damage can seriously affect the long-term use of metal materials in marine equipment and the aerospace industry, and other fields. Inspired by the special microstructure and slippery properties of natural nepenthes intine, researchers have prepared slippery liquid-infused porous surfaces (SLIPS) with a stable continuous lubricant layer by injecting low-surface-energy lubricants into a substrate with a micro/nano-porous structure. This surface has excellent hydrophobicity, low friction, non-adhesiveness, and self-healing properties. The broad application prospects of SLIPS in the fields of anti-corrosion, anti-icing, anti-bacteria, and anti-fouling have made it a hot research topic directing the study of biomimetic materials at present. However, SLIPS are susceptible to environmental shear forces, such as ocean flow or extraneous fluids, resulting in destruction of the porous structure and loss of surface lubricant, thereby depriving SLIPS of the ability to protect metals from corrosion. Therefore, it is important for metal corrosion protection to find ways to improve the stability and extend the service life of SLIPS. Over the last several years, research into and development of SLIPS have come a long way. Herein, a summary of available reports on SLIPS is given in terms of design principles and their performance characteristics, the construction of rough/porous substrate structures, the choice of low-surface-energy modifiers and lubricants, and lubricant infusion methods. Ways of constructing different substrate structures and the characteristics, advantages, and disadvantages of choosing various modifiers and lubricants to prepare the surface are compared. Finally, a comprehensive summary and outlook of SLIPS with anti-corrosion properties are provided. We are convinced that a comprehensive review of SLIPS will provide important guidance and strong reference for the design and preparation of green and economical SLIPS with anti-corrosion capabilities in the future.

Mechanical Durability of Low Ice Adhesion Polydimethylsiloxane Surfaces

Elastomeric surfaces and oil-infused elastic surfaces reveal low ice adhesion, in part because of their deformability. However, these soft surfaces might jeopardize their mechanical durability. In this work, we analyzed the mechanical durability of elastic polydimethylsiloxane (PDMS) surfaces with different balances between elasticity and deicing performances. The durability was studied in terms of shear/tensile ice adhesion strength before and after different wear tests. These tests consisted of abrasion/erosion cycles using standard procedures aimed to reproduce different environmental wearing agents. The main objective is to evaluate if our PDMS surfaces can become long-lasting solutions for ice removal in real conditions. We found that our elastic surfaces show excellent durability. After the wear tests, the ice adhesion strength values remained low or even unaltered. Although the oil-infused PDMS surface was the softest one, it presented considerable durability and excellent low ice adhesion, being a promising solution.

Advances in the development of superhydrophobic and icephobic surfaces

Superhydrophobicity and icephobicity are governed by surface chemistry and surface structure. These two features signify a potential advance in surface engineering and have recently garnered significant attention from the research community. This review aims to simulate further research in the development of superhydrophobic and icephobic surfaces in order to achieve their wide-spread adoption in practical applications. The review begins by establishing the fundamentals of the wetting phenomenon and wettability parameters. This is followed by the recent advances in modeling and simulations of the response of superhydrophobic surfaces to static and dynamic droplets contact and impingement, respectively. In view of their versatility and multifunctionality, a special attention is given to the development of these surfaces using nanocomposites. Furthermore, the review considers advances in icephobicity, its comprehensive characterization and its relation to superhydrophobicity. The review also includes the importance of the use of superhydrophobic surface to combat viral and bacterial contamination that exist in fomites.

Durable Liquid- and Solid-Repellent Elastomeric Coatings Infused with Partially Crosslinked Lubricants

Surfaces that are resistant to both liquid fouling and solid fouling are critical for many industrial and biomedical applications. However, surfaces developed to address these challenges thus far have been generally susceptible to mechanical damage. Herein, we report the design and fabrication of robust solid- and liquid-repellent elastomeric coatings that incorporate partially crosslinked lubricating chains within a durable polymer matrix. In particular, we fabricated partially crosslinked omniphobic polyurethane (omni-PU) coatings that can repel a broad range of liquid and solid foulants. The fabricated coatings are an order of magnitude more resistant to cyclic abrasion than current state-of-the-art slippery surfaces. Further through the integration of classic wetting and tribology models, we introduce a new material design parameter (K_AR) for abrasion-resistant polymeric coatings. This combination of mechanical durability and broad antifouling properties enables the implication of such coatings to a wide variety of industrial and medical settings, including biocompatible implants, underwater vehicles, and antifouling robotics.

Intrusion of liquids into liquid-infused surfaces with nanoscale roughness

We present a theoretical study of the intrusion of an ambient liquid into the pores of a nanocorrugated wall w. The pores are prefilled with a liquid lubricant that adheres to the walls of the pores more strongly than the ambient liquid does. The two liquids are modeled as a binary liquid mixture of two species of particles, A and B. The mixture can decompose into a liquid rich in A particles, representing the ambient liquid, and another one rich in B particles, representing the liquid lubricant. The wall is taken to attract the B particles more strongly than the A particles. The ratio w-A/w-B of these interaction strengths is changed in order to tune the contact angle θ_{AB} formed by the A-rich/B-rich liquid interface between the two fluids and a planar wall, composed of the same material as the one forming the pores. We use classical density functional theory in order to capture the effects of microscopic details on the intrusion transition, which occurs as the concentration of the minority component or the pressure in the bulk of the ambient liquid is varied, moving away from bulk liquid-liquid coexistence within the single-phase domain of the A-rich bulk ambient liquid. These liquid structures have been studied as a function of the contact angle θ_{AB} and for various widths and depths of the pores. We also studied the reverse process in which a pore initially filled with the ambient liquid is refilled with the liquid lubricant. The location of the intrusion transition, with respect to its dependence on the contact angle θ_{AB} and the width of the pore, qualitatively follows the corresponding shift of the capillary-coexistence line away from the bulk liquid-liquid coexistence line, as predicted by a macroscopic capillarity model. Quantitatively, the transition found in the microscopic approach occurs somewhat closer to the bulk liquid-liquid coexistence line than predicted by the macroscopic capillarity model. The quantitative discrepancies become larger for narrower cavities. In cases in which the wall is completely wetted by the lubricant (θ_{AB}=0) and for small contact angles, the reverse transition follows the same path as for intrusion; there is no hysteresis. For larger contact angles, hysteresis is observed. The width of the hysteresis increases with increasing contact angle. A reverse transition is not found inside the domain within which the ambient liquid forms a single phase in the bulk once θ_{AB} exceeds a geometry-dependent threshold value. According to the macroscopic capillarity theory, for the considered geometry, this is the case for θ_{AB}>54.7^{∘}. Our computations show, however, that nanoscale effects shift this threshold value to much higher values. This shift increases strongly if the widths of the pores become smaller (below about ten times the diameter of the A and B particles).

Overview of the development of slippery surfaces: Lubricants from presence to absence

The superhydrophobic surfaces inspired by the lotus have excellent performances and are known for their low contact angle hysteresis and smooth surfaces. However, there are still some problems, such as the unstable structure, poor durability, high product cost and so on that need to be improved. Those issues can be avoided via liquid-infused surfaces(LIS), which are inspired by Nepenthes and consist of a mico-nano structured substrate and a smooth continuous atomic-grade lubricant. Compared with superhydrophobic surfaces, LIS not only achieves the same hydrophobic properties but also has smaller contact angle hysteresis, smoother surface, more stable structure and lower preparation cost. Although the existence of a lubricant layer improves the performance of the material, it also leaves a hidden danger, which is easy to lose and leads to the deterioration of the durability of the material. Therefore, the lubricant-free slipper materials have attracted more and more attention in recent years due to their low volatility, good durability and excellent lubrication performance. In this review, the types of LIS lubricants and their physicochemical properties were summarized at the beginning and then the applications of LIS in various fields were introduced. At the end of this paper, some solid lubricants and their applications were described, and the future development prospects of LIS lubricants also were expected.

Bioinspired functional SLIPSs and wettability gradient surfaces and their synergistic cooperation and opportunities for enhanced condensate and fluid transport

Bioinspired smart functional surfaces have received increasing attention in recent years owed to their tunable wettability and enhanced droplet transport suggesting them as excellent candidates for industrial and nanotechnology-related applications. More specifically, bioinspired slippery lubricant infused porous surfaces (SLIPSs) have been proposed for their low adhesion enabling continuous dropwise condensation (DWC) even of low-surface tension fluids. In addition, functional surfaces with chemical and/or structural wettability gradients have also been exploited empowering spontaneous droplet transport in a controlled manner. Current research has focused on the better understanding of the mechanisms and intimate interactions taking place between liquid droplets and functional surfaces or on the forces imposed by differences in surface wettability and/or by Laplace pressure owed to chemical or structural gradients. Nonetheless, less attention has been paid to the synergistic cooperation of efficiently driving droplet transport via chemical and/or structural patterns/gradients on a low surface energy/adhesion background imposed by SLIPSs, with the consequent promising potential for microfluidics and condensation heat transfer applications amongst others. This review provides a detailed and timely overview and summary on recent advances and developments on bioinspired SLIPSs and on wettability gradient surfaces with focus on their synergistic cooperation for condensation and fluid transport related applications. Firstly, the fundamental theory and mechanisms governing complex droplet transport on homogeneous, on wettability gradient surfaces and on inclined SLIPSs are introduced. Secondly, recent advances on the fabrication and characterization of SLIPSs and functional surfaces are presented. Then, the condensation performance on such functional surfaces comprising chemical or structural wettability gradients is reviewed and their applications on condensation heat transfer are summarized. Last a summary outlook highlighting the opportunities and challenges on the synergistic cooperation of SLIPSs and wettability gradient surfaces for heat transfer as well as future perspective in modern applications are presented.

Bio-inspired strategies for next-generation perovskite solar mobile power sources

Smart electronic devices are becoming ubiquitous due to many appealing attributes including portability, long operational time, rechargeability and compatibility with the user-desired form factor. Integration of mobile power sources (MPS) based on photovoltaic technologies with smart electronics will continue to drive improved sustainability and independence. With high efficiency, low cost, flexibility and lightweight features, halide perovskite photovoltaics have become promising candidates for MPS. Realization of these photovoltaic MPS (PV-MPS) with unconventionally extraordinary attributes requires new 'out-of-box' designs. Natural materials have provided promising designing solutions to engineer properties under a broad range of boundary conditions, ranging from molecules, proteins, cells, tissues, apparatus to systems in animals, plants, and humans optimized through billions of years of evolution. Applying bio-inspired strategies in PV-MPS could be biomolecular modification on crystallization at the atomic/meso-scale, bio-structural duplication at the device/system level and bio-mimicking at the functional level to render efficient charge delivery, energy transport/utilization, as well as stronger resistance against environmental stimuli (e.g., self-healing and self-cleaning). In this review, we discuss the bio-inspired/-mimetic structures, experimental models, and working principles, with the goal of revealing physics and bio-microstructures relevant for PV-MPS. Here the emphasis is on identifying the strategies and material designs towards improvement of the performance of emerging halide perovskite PVs and strategizing their bridge to future MPS.

Asymmetric Mass Transport through Dense Heterogeneous Polymer Membranes: Fundamental Principles, Lessons from Nature, and Artificial Systems

Many organisms rely on directional water transport schemes for the purpose of water retention and collection. Directional transport of water and other fluids is also technologically relevant, for example to harvest water, in separation processes, packaging solutions, functional clothing, and many other applications. One strategy to promote mass transport along a preferential direction is to create compositionally asymmetric, multi-layered, or compositionally graded architectures. In recent years, the investigation of natural and artificial membranes based on this design has attracted growing interest and allowed researchers to develop a good understanding of how the properties of such membranes can be tailored to meet the demands of particular applications. Here a summary of theoretical works on mass transport through dense asymmetric membranes, comprehensive reviews of biological and artificial membranes featuring this design, and a discussion of applications, remaining questions, and opportunities are provided.

Evaluation of the Durability of Slippery, Liquid-Infused Porous Surfaces in Different Aggressive Environments: Influence of the Chemical-Physical Properties of Lubricants

Liquid-repellent surfaces have been extensively investigated due to their potential application in several fields. Superhydrophobic surfaces achieve outstanding water repellence, however their limited durability in severe operational conditions hinders their large-scale application. The Slippery, Liquid-Infused Porous Surface (SLIPS) approach solves many of the durability problems shown by superhydrophobic surfaces due to the presence of an infused liquid layer. Moreover, SLIPS show enhanced repellence towards low surface tension liquids that superhydrophobic surfaces cannot repel. In this perspective, SLIPS assume significant potential for application in harsh environments; however, a systematic evaluation of their durability in different conditions is still lacking in the literature. In this work, we report the fabrication of SLIPS based on a ceramic porous layer infused with different lubricants, namely perfluoropolyethers with variable viscosity and n-hexadecane; we investigate the durability of these surfaces by monitoring the evolution of their wetting behavior after exposure to severe environmental conditions like UV irradiation, chemically aggressive solutions (acidic, alkaline, and saline), and abrasion. Chemical composition and viscosity of the infused liquids prove decisive in determining SLIPS durability; especially highly viscous infused liquids deliver enhanced resistance to abrasion stress and chemical attack, making them candidates for applicable, long-lasting liquid-repellent surfaces.

Design of Lubricant-Infused Surfaces Based on Mussel-Inspired Nanosilica Coatings: Solving Adhesion by Pre-Adhesion

Slippery liquid-infused porous surfaces (SLIPSs) have attracted wide interest with regard to their excellent liquid repellency properties and broad applications in various fields associated with anti-adhesion. However, the preparation processes depending on the chemical properties of the substrate and the poor stability of the lubricant layer hinder the practical applications. In this work, a facile method to fabricate SLIPSs based on the mussel-inspired polydopamine (PDA)-mediated nanosilica structures is demonstrated. A variety of substrates can be decorated with SLIPSs by successive treatment of PDA-assisted sol-gel process, fluorination, and lubricant filling. The robust uniform and nanotextured silica coating, mediated by the pre-adhered PDA layer, shows enhanced lubricant-locking ability even when subjected to increased evaporation and high shear from flowing water or spinning compared with hierarchical silica rough structures. The obtained SLIPSs exhibit high transparency and excellent resistance against adhesion of liquid/solid contaminants and biofoulings through this pre-adhesion of PDA strategy. The well-defined nanosilica coating of high decoration covering micron-scaled pore walls enables improved durability of the slippery surfaces for antifouling of the porous membrane under pressure-driven filtration and this may be employed as a potential candidate for fouling resistance of porous materials.

Functional morphology of plants - a key to biomimetic applications

Learning from living organisms has emerged from a mainly curiosity-driven examination, where helpful functions of biological structures have been copied, into systematic biomimetic approaches that transfer a targeted function and its underlying principles from the biological model to a technical product. Plant biomimetics is based on functional morphology, which combines the knowledge gained from the morphology, anatomy and mechanics of plants and makes a statement about their form-structure-function relationship. Since the functional morphology of plants has become key to biomimetic applications, we present its central role in deciphering the functional principles that can be applied to engineering solutions. We consider that the future of biomimetics will include bioinspired developments that will contribute to better sustainability than that achieved by conventional products.

Recent Progress of Bioinspired Scalephobic Surfaces with Specific Barrier Layers

Bioinspired superwettable surfaces have been widely harnessed in diverse applications such as self-cleaning, oil/water separation, and liquid transport. So far, only a little work is focused on scalephobic capability of those superwettable surfaces. However, the troublesome scale deposition will inevitably be observed in our daily production and life, greatly reducing heat transfer efficiency and inhibiting the liquid transport. To address this annoying problem, as the emerging strategy, specific barrier layers are introduced onto superwettable surfaces to reduce or even avoid the direct contact between scale and the surfaces. In this feature article, we first provide the basic concept of bioinspired scalephobic surfaces with specific barrier layers. Then, we briefly introduce the typical fabrication methods of scalephobic surfaces. Later, we summarize recent progress of bioinspired scalephobic surfaces with specific barrier layers. Furthermore, we point out the guiding theory and criteria for the stability of barrier layers. Finally, we put forward the forecast on the existing problems and future direction in bioinspired scalephobic surfaces.

Liquid Crystal-Infused Porous Polymer Surfaces: A "Slippery" Soft Material Platform for the Naked-Eye Detection and Discrimination of Amphiphilic Species

We report the design and characterization of liquid crystal (LC)-infused porous polymer membranes that can detect and report on the presence of natural and synthetic amphiphiles in aqueous solution. We demonstrate that thermotropic LCs can be infused into nanoporous polymer membranes to yield LC-infused surfaces that exhibit slippery behaviors in contact with a range of aqueous fluids. In contrast to conventional liquid-infused surfaces (LIS) or slippery liquid-infused porous surfaces (SLIPS) prepared using isotropic oils, aqueous solutions slide over the surfaces of these LC-infused materials at speeds that depend strongly upon the composition of the fluid, including the presence, concentration, or structure of a dissolved surfactant. In general, the sliding times of aqueous droplets on these LC-infused surfaces increase significantly (e.g., from times on the order of seconds to times on the order of minutes) with increasing amphiphile concentration, allowing sliding times to be used to estimate the concentration of the amphiphile. Additional experiments revealed other intrinsic and extrinsic variables or parameters that can be used to further manipulate droplet sliding times and discriminate among amphiphiles of similar structure. Our results are consistent with a physical picture that involves reversible changes in the interfacial orientation of anisotropic LCs mediated by the interfacial adsorption of amphiphiles. These materials thus permit facile "naked-eye" detection and discrimination of amphiphiles in aqueous samples using equipment no more sophisticated than a stopwatch. We demonstrate the potential utility of these LC-infused surfaces for the unaided, naked-eye detection and monitoring of amphiphilic biotoxins in small droplets of fluid extracted directly from cultures of two common bacterial pathogens (Pseudomonas aeruginosa and Staphylococcus aureus). The ability to translate molecular interactions at aqueous/LC interfaces into large and readily observed changes in the sliding times of small aqueous droplets on surfaces could open the door to new applications for antifouling, liquid-infused materials in the context of environmental sensing and other fundamental and applied areas.

Adhesion behaviors on four special wettable surfaces: natural sources, mechanisms, fabrications and applications

The study of adhesion behaviors on solid-liquid surfaces plays an important role in scientific research and development in various fields, such as medicine, biology and agriculture. The contact angle and sliding angle of the liquid on the solid surface are commonly used to characterize and measure the wettability of a particular surface. They have a wide range of values, which results in different wettability. It boils down to the adhesion of solid surfaces to liquids. This feature article is aimed at revealing the essence of the adhesion behavior from the aspects of controlling the chemical composition or changing the geometrical microstructure of the surface, and reviewing the natural sources, wetting models, preparation methods and applications of four kinds of typical solid-liquid surfaces (low-adhesion superhydrophobic surfaces, high-adhesion superhydrophobic surfaces, slippery liquid-infused porous surfaces (SLIPS) and hydrophilic/superhydrophilic surfaces). Last, a summary and outlook on this field are given to point out the current challenges and the potential research directions of surface adhesion in the coming future.

Flexible-templated imprinting for fluorine-free, omniphobic plastics with re-entrant structures

HYPOTHESIS

Compared to vertical micro-pillars, re-entrant micro-structures exhibited superior omniphobicity for suspending liquids to Cassie-Baxter state. However, the existing re-entrant structures rely on complex multi-step deposition and etching procedures. The conventional, rigid-templated imprinting would instead damage the re-entrant structures. This leads to the question: is it possible to preserve the re-entrant curvatures by a flexible-templated imprinting?

EXPERIMENTS

We facilely imprinted the re-entrant structures on a plastic substrate using a flexible nylon-mesh template. The effect of imprinting time (15-35 min), temperature (110-120 °C) and pressure (15-50 Bar) was investigated. To further improve the liquid-repellency and abrasion resistance, the silica nanoparticles (30-650 nm) along with epoxy resin binder (10 mg/mL) were pre-coated.

FINDINGS

A one-step imprinting is sufficient to fabricate the re-entrant structures by utilizing flexible nylon-mesh template, without damaging the imprinted structures after the demolding process. The pre-coated silica nanoparticles and epoxy resin (1) improved liquid repellency by introducing hierarchical surface structures (e.g. contact angle hysteresis of olive oil reduced > 10°), and (2) acted as a protective layer against mechanical abrasion (omniphobicity maintained after 25 cycles, ~1.6 kPa sand paper abrasion). Additionally, the fluorine-free post-treatment was sufficient for the omniphobicity on the obtained plastic structures.

Progress in Bioinspired Dry and Wet Gradient Materials from Design Principles to Engineering Applications

Nature does nothing in vain. Through millions of years of revolution, living organisms have evolved hierarchical and anisotropic structures to maximize their survival in complex and dynamic environments. Many of these structures are intrinsically heterogeneous and often with functional gradient distributions. Understanding the convergent and divergent gradient designs in the natural material systems may lead to a new paradigm shift in the development of next-generation high-performance bio-/nano-materials and devices that are critically needed in energy, environmental remediation, and biomedical fields. Herein, we review the basic design principles and highlight some of the prominent examples of gradient biological materials/structures discovered over the past few decades. Interestingly, despite the anisotropic features in one direction (i.e., in terms of gradient compositions and properties), these natural structures retain certain levels of symmetry, including point symmetry, axial symmetry, mirror symmetry, and 3D symmetry. We further demonstrate the state-of-the-art fabrication techniques and procedures in making the biomimetic counterparts. Some prototypes showcase optimized properties surpassing those seen in the biological model systems. Finally, we summarize the latest applications of these synthetic functional gradient materials and structures in robotics, biomedical, energy, and environmental fields, along with their future perspectives. This review may stimulate scientists, engineers, and inventors to explore this emerging and disruptive research methodology and endeavors.

A comparison between superhydrophobic surfaces (SHS) and slippery liquid-infused porous surfaces (SLIPS) in application

Slippery liquid-infused porous surfaces inspired by the Nepenthes pitcher plant exhibit excellent performances and are known for their extremely low contact angle hysteresis (<5°) and smooth surface. In contrast, superhydrophobic surfaces (SHS) exhibit poor pressure stability, difficulty in self-healing, and difficulty in removing low surface tension liquids or organic solvents, which can affect the stable air layer. Thus, these issues can be avoided through the replacement of SHS with slippery liquid infused porous surfaces (SLIPS). In this review, the theoretical models of SHS and SLIPS are classified initially, and several design standards for the preparation of SLIPS are briefly described. Then, we focus on comparing the differences in the application of SHS and SLIPS, such as pressure stability, transparency, and droplet manipulation. However, there are still some problems that need to be improved during the preparation of SLIPS, such as the evaporation of the lubricant layer, the use of a lubricant layer of toxic perfluoropolyether and other substances, and easily lost nanostructured lubricant layer. Accordingly, several new improved methods are proposed in this review, and finally, the potential applications and development prospects of SLIPS are presented.

Design novel three-dimensional network nanostructure for lubricant infused on titanium alloys towards long-term anti-fouling

Titanium alloys, recognized as a marine material with great potential, are currently facing serious biofouling problems, which greatly limits its application range. To improve the antifouling performance of titanium alloys, three unique surface of three-dimensional network, grass-like and linear nanostructures were obtained on titanium alloys via hydrothermal treatment in this work. Further, slippery liquid-infused porous surfaces (SLIPSs) were fabricated on titanium alloys via infusing PFPE lubricant into these nanostructures. Water contact angles and sliding angles of SLIPSs were measured to evaluate the effect of nanostructures on the stability of PFPE lubricant layer. Anti-fouling capability of SLIPSs were investigated by quantifying the cells of chlorella and phaeodactylum tricornutum (P. tricornutum)adhered to titanium alloys. The results shows that all the SLIPSs exhibited remarkable inhibition capacity for the settlement of chlorella and P. tricornutum. Among them, the SLIPS with three-dimensional network nanostructure displayed the longest-term anti-fouling performance, and its reduction rate of P. tricornutum and chlorella reaching 77.2 % and 84.5 % after being cultivated for 21 days, respectively, indicating that there existed a positive correlation between the stability of lubricant layer in the artificial seawater and the antifouling effect.

Durable lubricant-infused coating on a magnesium alloy substrate with anti-biofouling and anti-corrosion properties and excellent thermally assisted healing ability

Inspired by lotus leaves, superhydrophobic surfaces (SHS) have been fabricated by many methods due to their various properties such as self-cleaning, anti-corrosion, and anti-biofouling properties. In recent years, inspired by Nepenthes pitcher plants, the 'slippery liquid-infused porous surface' (SLIPS) has attracted numerous researchers' attention because it not only shows ability corresponding to SHS but also exhibits durability in some aspects due to the continuous and homogeneous liquid-infused surfaces. In this paper, we firstly used a facile hydrothermal method and modification to fabricate SHS on a Mg alloy substrate. After the infusion of a lubricant by a spin-coating method, the transformation from the SHS to SLIPS can be achieved. The SLIPS exhibits an excellent self-cleaning property compared to the SHS, except that the water droplet rolls on the SHS and slides on the SLIPS. Moreover, the SLIPS demonstrates better anti-corrosion and anti-biofouling properties, and is obviously superior to SHS for use on the Mg alloy substrate. The enhanced anti-corrosion and anti-biofouling properties of the SLIPS are because the continuously infused lubricant replaces the air trapped in the micro-pores. Importantly, compared with SHS, the SLIPS shows excellent thermally assisted healing properties. The results of this work indicate that the SLIPS is expected to be an efficient method for improving the water-repellent, self-cleaning, anti-biofouling and anti-corrosion properties of magnesium alloys.

Life and death of liquid-infused surfaces: a review on the choice, analysis and fate of the infused liquid layer

We review the rational choice, the analysis, the depletion and the properties imparted by the liquid layer in liquid-infused surfaces – a new class of low-adhesion surface.

Droplet Morphology and Mobility on Lubricant-Impregnated Surfaces: A Molecular Dynamics Study

Slippery liquid-infused porous surfaces (SLIPS) are gaining remarkable attention and have advanced performance in many fields. Although all SLIPS are related to lubricant-impregnation within nano/microstructures on a surface, they differ in many aspects, such as the morphology of droplets, the state of cloaking, the wetting edge, and the lubricant thickness. Requirements of the droplet morphology on SLIPS might change according to a specific application. A molecular-dynamics-based numerical model that can correctly simulate SLIPS is developed and is validated by comparing against the theoretical predictions for all possible stable states for a given droplet, lubricant, and solid surface. On the basis of this model, a detailed analysis of the equilibrium states is conducted. In particular, we discover that the four possible stable states on SLIPS predicted by theoretical studies can be extended to eight states by considering the effects of lubricant thickness and surface geometry in addition to the interfacial tension and surface wettability. These findings could be used to determine the conditions under which a thermodynamically stable state exists on SLIPS. The dynamic behavior of a nanodroplet on SLIPS is also studied, which provides insight into how a proper increase in the lubricant thickness might increase the sliding velocity. The above findings and developed model are expected to provide significant guidelines for designing SLIPS.

Field testing of a prototype mechanical dry toilet flush

A prototype of a non-fluid based mechanical toilet flush was tested in a semi-public, institutional setting and in selected peri-urban households in eThekwini municipality, Republic of South Africa. The mechanism's functionality and users' perception of the flush were assessed. User perception varied depending on background: Users accustomed to porcelain water flush toilets were open to, yet reserved about the idea of using a waterless flush in their homes. Those who commonly use Urine Diversion Dehydration Toilets were far more receptive. The user-centred field trials were complemented by a controlled laboratory experiment, using synthetic urine, -faeces, and -menstrual blood, to systematically assess the efficiency of three swipe materials to clean the rotating bowl of the flush. A silicone rubber with oil-bleed-effect was found to be the best performing material for the swipe. Lubrication of the bowl prior to use further reduced fouling. A mechanical waterless flush that does not require consumables, like plastic wrappers, is a novelty and could - implemented in existing dry toilet systems - improve acceptance and thus the success of waterless sanitation.

An Overview of Bioinspired and Biomimetic Self-Repairing Materials

During the 3.8 billion years of biological evolution, a multitude of functional principles has been developed in all kingdoms of life enabling the sealing and healing of diverse types of damage. Inspired by this treasure trove, biologists and engineers have become increasingly interested in learning from biological insights for the development of self-repairing materials. In this review, particular attention is paid to the systematic transfer of knowledge from wound reactions in biological role models to technical applications with self-repair function. This knowledge transfer includes bioinspiration in terms of the conscious implementation of an idea from nature or biomimetics in the form of a systematic transfer of underlying functional principles found in selected biological role models. The current overview presents a selection of breakthroughs regarding bioinspired or biomimetic self-repairing materials, including the initial basic publications and the recent publications of the last eight years. Each reviewed publication is presented with reference to three key criteria: (i) self-repair mechanisms in plants or animals as role models; (ii) knowledge transfer from living nature to technology; and (iii) bioinspired or biomimetic materials with self-repair function. Finally, damage control is discussed with a focus on damage prevention and damage management.

Development of Multimodal Antibacterial Surfaces Using Porous Amine-Reactive Films Incorporating Lubricant and Silver Nanoparticles

Anti-biofouling has been improved by passive or active ways. Passive antifouling strategies aim to prevent the initial adsorption of foulants, while active strategies aim to eliminate proliferative fouling by destruction of the chemical structure and inactivation of the cells. However, neither passive antifouling strategies nor active antifouling strategies can solely resist biofouling due to their inherent limitations. Herein, we successfully developed multimodal antibacterial surfaces for waterborne and airborne bacteria with the benefit of a combination of antiadhesion (passive) and bactericidal (active) properties of the surfaces. We elaborated multifunctionalizable porous amine-reactive (PAR) polymer films from poly(pentafluorophenyl acrylate) (PPFPA). Pentafluorophenyl ester groups in the PAR films facilitate creation of multiple functionalities through a simple postmodification under mild condition, based on their high reactivity toward various primary amines. We introduced amine-containing poly(dimethylsiloxane) (amine-PDMS) and dopamine into the PAR films, resulting in infusion of antifouling silicone oil lubricants and formation of bactericidal silver nanoparticles (AgNPs), respectively. As a result, the PAR film-based lubricant-infused AgNPs-incorporated surfaces demonstrate outstanding antibacterial effects toward both waterborne and airborne Escherichia coli, suggesting a new door for development of an effective multimodal anti-biofouling surface.

Flexible and Stable Omniphobic Surfaces Based on Biomimetic Repulsive Air-Spring Structures

In artificial biological circulation systems such as extracorporeal membrane oxygenation, surface wettability is a critical factor in blood clotting problems. Therefore, to prevent blood from clotting, omniphobic surfaces are required to repel both hydrophilic and oleophilic liquids and reduce surface friction. However, most omniphobic surfaces have been fabricated by combining chemical reagent coating and physical structures and/or using rigid materials such as silicon and metal. It is almost impossible for chemicals to be used in the omniphobic surface for biomedical devices due to durability and toxicity. Moreover, a flexible and stable omniphobic surface is difficult to be fabricated by using conventional rigid materials. This study demonstrates a flexible and stable omniphobic surface by mimicking the re-entrant structure of springtail's skin. Our surface consists of a thin nanohole membrane on supporting microstructures. This structure traps air under the membrane, which can repel the liquid on the surface like a spring and increase the contact angle regardless of liquid type. By theoretical wetting model and simulation, we confirm that the omniphobic property is derived from air trapped in the structure. Also, our surface well maintains the omniphobicity under a highly pressurized condition. As a proof of our concept and one of the real-life applications, blood experiments are performed with our flat and curved surfaces and the results including contact angle, advancing/receding angles, and residuals show significant omniphobicity. We hope that our omniphobic surface has a significant impact on blood-contacting biomedical applications.

Designing Liquid-Infused Surfaces for Medical Applications: A Review

The development of new technologies is key to the continued improvement of medicine, relying on comprehensive materials design strategies that can integrate advanced therapeutic and diagnostic functions with a variety of surface properties such as selective adhesion, dynamic responsiveness, and optical/mechanical tunability. Liquid-infused surfaces have recently come to the forefront as a unique approach to surface coatings that can resist adhesion of a wide range of contaminants on medical devices. Furthermore, these surfaces are proving highly versatile in enabling the integration of established medical surface treatments alongside the antifouling capabilities, such as drug release or biomolecule organization. Here, the range of research being conducted on liquid-infused surfaces for medical applications is presented, from an understanding of the basics behind the interactions of physiological fluids, microbes, and mammalian cells with liquid layers to current applications of these materials in point-of-care diagnostics, medical tubing, instruments, implants, and tissue engineering. Throughout this exploration, the design parameters of liquid-infused surfaces and how they can be adapted and tuned to particular applications are discussed, while identifying how the range of controllable factors offered by liquid-infused surfaces can be used to enable completely new and dynamic approaches to materials and devices for human health.

Heat-Shielding and Self-Cleaning Smart Windows: Near-Infrared Reflective Photonic Crystals with Self-Healing Omniphobicity via Layer-by-Layer Self-Assembly

Bioinspired photonic crystals that can be used to precisely control the optical reflection of light of a specific wavelength by varying their thickness and refractive index have attracted much attention. Among them, photonic crystals that can reflect near-infrared light have attracted attention owing to their potential applications including window coating with heat-shielding property. However, photonic crystals with an optical function in practical use sometimes lose their function because of contamination. Here, a near-infrared reflection coating film with self-healing omniphobicity was designed and prepared by layer-by-layer assembly and an instant liquid phase omniphobization method. The fabricated films had a self-cleaning thermal shielding effect. The films were visually transparent and could be used to control the reflection peak of the near-infrared light (range of 700-1000 nm) by adjusting the film thickness, which prevented the increase in temperature in enclosed spaces. After omniphobization, the films had self-cleaning properties of their surface and retained their optical properties. These functions are promising for practical application on windows as heat-shielding.

Ionic-Liquid-Infused Nanostructures as Repellent Surfaces

In order to prepare lubricant-infused repellent coatings on silica nanostructures using low vapor pressure ionic liquids as lubricants, we study the wetting behavior of a set of imidazolium-based ionic liquids with different alkyl side chains as a function of the applied surface functionalities. We take advantage of the structural color of inverse opals prepared from a colloidal coassembly technique to study the infiltration of ionic liquids into these nanoporous structures. We find that the more hydrophobic ionic liquids with butyl and hexyl side chains can completely infiltrate inverse opals functionalized with mixed self-assembled monolayers composed of imidazole groups and aliphatic hydrocarbon chains, which we introduce via silane chemistry. These molecular species reflect the chemical nature of the ionic liquid, thereby increasing the affinity between the liquid and solid surface. The mixed surface chemistry provides sufficiently small contact angles with the ionic liquid to infiltrate the nanopores while maximizing the contact angle with water. As a result, the mixed monolayers enable the design of a stable ionic liquid/solid interface that is able to repel water as a test liquid. Our results underline the importance of matching chemical affinities to predict and control the wetting behavior in complex, multiphase systems.

Slippery Liquid-Infused Porous Surfaces (SLIPS) Using Layer-by-Layer Polyelectrolyte Assembly in Organic Solvent

Slippery liquid-infused porous surfaces (SLIPS) have potential impact on a wide range of industries, including healthcare, food packaging, and automobile. A tremendouseffort has been focused on developing novel fabrication methods for making SLIPS. However, current fabrication methods usually involve harsh conditions and complicated postfabrication modifications or are limited to specific substrates. Presented here is a novel method for the fast and facile fabrication of SLIPS. Layer-by-layer (LBL) assembly of branched polyethylenimine and Nafion, a perfluorinated polyelectrolyte, is performed with methanol as the solvent. Hierarchically rough and superhydrophobic surface is obtained directly without further modification on various substrates. The surface properties are shown to highly depend on the LBL assembly parameters, including deposition cycles, dipping time, rinsing time, and drying time between baths. The polyelectrolyte multilayers obtained with this method are infused with Krytox 100 to form SLIPS surfaces, which show excellent omniphobic, antifouling, self-cleaning, flexible, and optical properties. The result of this study not only simplifies the fabrication of SLIPS surfaces, but also provides great insight for making LBL films with specific morphologies.

An Aqueous Composition for Lubricant-Free, Robust, Slippery, Transparent Coatings on Diverse Substrates

Transparent, durable coating materials that show excellent liquid repellency, both water and oil, have multiple applications in science and technology. In this perspective, herein, a simple aqueous chemical formulation is developed that provides a transparent slippery coating without any lubricating fluids, on various substrates extended over large areas. The coatings repel liquids having a range of polarity (solvents) as well as viscosity (oils and emulsions) and withstand mechanical strains. Exceptional optical transparency of 99% in the range of 350-900 nm along with high stability even after cyclic temperature, frost, exposure to sunlight, and corrosive liquids like aqua regia treatments, makes this material unique and widens its applicability in different fields. Besides, being a liquid, it can be coated on an array of substrates independent of their underlying topography, by various easily available techniques. Aside from these interesting properties, the coating is demonstrated as a potential solution contributing to the remediation of one of the biggest global issues of tomorrow: affordable drinking water. The coated surface can capture 5 L of water per day per m2 at 27 °C when exposed to an atmosphere of 63% relative humidity.

Silicone Oil Swelling Slippery Surfaces Based on Mussel-Inspired Magnetic Nanoparticles with Multiple Self-Healing Mechanisms

In this work, a novel substrate building block, magnetic Fe₃O₄ nanoparticles armed with dopamine molecules were developed via mussel-inspired metal-coordination bonds. Combined with glycidyl methacrylate, polydimethylsiloxane propyl ether methacrylate, and diethylenetriamine, the original silicone oil swelling slippery liquid-infused porous surfaces (SLIPS) were first prepared by reversible coordinate bonds and strong covalent bonds cross-linking process. The matrix mechanical characteristics and surface physicochemical properties were systematically investigated. Results showed that the mechanical property of copolymer matrix and surface wettability of SLIPS can be remarkably recovered, which were due to the synergistic interactions of magnetic nanoparticles' intrinsic photothermal effect, reversible Fe-catechol coordination, and diffused lubricating liquid. After irradiating with sunlamp for 2 h and sequentially healing for 10 h under ambient conditions, the crack almost disappeared under optical microscopy with 78.25% healing efficiency (HEf) of toughness, and surface slippery was completely retrieved to water droplets. The efficient self-heal of copolymer matrix (66.5% HEf after eighth cutting-healing cycle) and recovering of slipperiness (SA < 5° and 5° < SA < 17° after fourth and eighth cutting-centrifuging-healing cycles, respectively) would extend longevity of SLIPS when subjected to multiple damages. Moreover, the prepared SLIPS displayed superb self-cleaning and liquid-repellent properties to a wide range of particulate contaminants and fluids.

Mussel-Inspired Polyglycerol Coatings with Controlled Wettability: From Superhydrophilic to Superhydrophobic Surface Coatings

Facile approaches to substrate-independent surface coatings with special wettability properties, such as superhydrophobicity, superhydrophilicity, and superamphiphobicity, have been limited. To address this problem, we combined two separate biomimetic concepts of mussel-inspired adhesion and highly hierarchical lotuslike surface structures to develop a universal fabrication method for various superwetting systems on any kind of material. In this feature article, we summarize our work on mussel-inspired polyglycerol (MI-dPG) and its application in the area of superwetting interfacial materials. MI-dPG mimics not only the functional groups of mfp-5 but also their molecular weight and molecular structure, which results in strong and rapid adhesion to the substrate. Furthermore, the MI-dPG coating process provides precise roughness control. The construction of highly hierarchical and superhydrophilic structures was achieved either directly by pH-controlled aggregation or in combination with nanoparticles. Subsequent postmodification of these highly hierarchical structures with different fluorinated or nonfluorinated hydrophobic molecules yielded a surface with superhydrophobic and even superamphiphobic properties.

Antifouling Biomimetic Liquid-Infused Stainless Steel: Application to Dairy Industrial Processing

Fouling is a widespread and costly issue, faced by all food-processing industries. Particularly, in the dairy sector, where thermal treatments are mandatory to ensure product safety, heat-induced fouling represents up to 80% of the total production costs. Significant environmental impacts, due the massive consumption of water and energy, are also to deplore. Fouling control solutions are thus desperately needed, as they would lead to substantial financial gains as well as tremendous progress toward eco-responsible processes. This work aims at presenting a novel and very promising dairy fouling-mitigation strategy, inspired by nature, and to test its antifouling performances in real industrial conditions. Slippery liquid-infused surfaces were successfully designed directly on food grade stainless steel, via femtosecond laser ablation, followed by fluorosilanization and impregnation with an inert perfluorinated oil. Resulting hydrophobic surfaces (water contact angle of 112°) exhibited an extremely slippery nature (contact angle hysteresis of 0.6°). Outstanding fouling-release performances were obtained for these liquid-infused surfaces as absolutely no trace of dairy deposit was found after 90 min of pasteurization test in pilot-scale equipment followed by a short water rinse.

Bioinspired Smart Coating with Superior Tribological Performance

Inspired by the structure of cancellous bone and the nutrition metabolism of articular cartilage, we present a novel concept for a synthetic articular-cartilage-like material. The bioinspired material possesses a low coefficient of friction even under ultrahigh loads and has an extremely long lifetime. Furthermore, the composite shows zero-wear behavior and causes negligible wear damage to the friction pair. The superior tribological performance is attributed to the spontaneously generated articular-cartilage-like layer, which is constantly replenished by frictional heat and pressure. Our findings open a new area for industrial scale engineering applications to improve the friction and wear properties of moving components.

Development of Laser-Structured Liquid-Infused Titanium with Strong Biofilm-Repellent Properties

Medical implants are commonly used in modern medicine but still harbor the risk of microbial infections caused by bacterial biofilms. As their retrospective treatment is difficult, there is a need for biomedical materials that inhibit bacterial colonization from the start without using antibacterial agents, as these can promote resistance development. The promising concept of slippery liquid-infused porous surfaces (SLIPS) possesses enormous potential for this purpose. In the present study, this principle was applied to titanium, a common material in implantology, and its biofilm-repellent properties were demonstrated. To simplify prospective approval of the medical device and to avoid chemical contamination, surface structuring was performed by ultrashort pulsed laser ablation. Four different structures (hierarchical micro- and nanosized spikes, microsized grooves, nanosized ripples, and unstructured surfaces) and five infusing perfluoropolyethers of different viscosities were screened; the best results were obtained with the biomimetic, hierarchical spike structure combined with lubricants of medium viscosities (20-60 cSt at 37 °C, 143 AZ, and GPL 104). The surfaces exhibited extremely low contact angle hysteresis, as is typical for liquid-infused materials and a reliable 100-fold reduction of human oral pathogen Streptococcus oralis biofilms. This characteristic was maintained after exposure to shear forces and gravity. The titanium SLIPS also inhibited adherence of human fibroblasts and osteoblasts. Toxicity tests supported the explanation that solely the surface's repellent properties are responsible for the vigorous prevention of the adhesion of bacteria and cells. This use of physically structured and liquid-infused titanium to avoid bioadhesion should support the prevention of bacterial implant-associated infections without the use of antibacterial agents.

Self-Assembly-Directed Aerogel and Membrane Formation from a Magnetic Composite: An Approach to Developing Multifunctional Materials

Herein, we report the preparation of an aerogel and a membrane from a magnetic composite material by tuning the self-assembly at the molecular level. The gel exhibits an excellent oil absorption property, and the membrane shows a remarkable autonomous self-healing property. The composite is formed from an organosilicon-modified poly(amidoamine) (PAMAM) dendrimer, which is linked with iron oxide nanoparticles and poly(vinyl alcohol). Upon the addition of a cross-linker (formaldehyde), the system undergoes a fast self-assembly and gelation process. The aerogel, obtained after drying of the hydrogel, was modified with 1- bromohexadecane at room temperature and utilized for the removal of oil from water with 22.9 g/g absorption capacity. Intriguingly, the same system forms a membrane with 97% autonomous self-healing ability, in the absence of the cross-linker. The membrane was used to remove the salt content from water with an efficiency of 85%. The control experiments suggest that the presence of the magnetic material (iron oxide) plays a key role in the formation of both the aerogel and membrane.

Layer-by-Layer Assembly of Fluorine-Free Polyelectrolyte-Surfactant Complexes for the Fabrication of Self-Healing Superhydrophobic Films

Fluorine-free self-healing superhydrophobic films are of significance for practical applications because of their extended service life and cost-effective and eco-friendly preparation process. In this study, we report the fabrication of fluorine-free self-healing superhydrophobic films by layer-by-layer (LbL) assembly of poly(sodium 4-styrenesulfonate) (PSS)-1-octadecylamine (ODA) complexes (PSS-ODA) and poly(allylamine hydrochloride) (PAH)-sodium dodecyl sulfonate (SDS) (PAH-SDS) complexes. The wettability of the LbL-assembled PSS-ODA/PAH-SDS films depends on the film structure and can be tailored by changing the NaCl concentration in aqueous dispersions of PSS-ODA complexes and the number of film deposition cycles. The freshly prepared PSS-ODA/PAH-SDS film with micro- and nanoscaled hierarchical structures is hydrophilic and gradually changes to superhydrophobic in air because the polyelectrolyte-complexed ODA and SDS surfactants tend to migrate to the film surface to cover the film with hydrophobic alkyl chains to lower its surface energy. The large amount of ODA and SDS surfactants loaded in the superhydrophobic PSS-ODA/PAH-SDS films and the autonomic migration of these surfactants to the film surface endow the resultant superhydrophobic films with an excellent self-healing ability to restore the damaged superhydrophobicity. The self-healing superhydrophobic PSS-ODA/PAH-SDS films are mechanically robust and can be deposited on various flat and nonflat substrates. The LbL assembly of oppositely charged polyelectrolyte-surfactant complexes provides a new way for the fabrication of fluorine-free self-healing superhydrophobic films with satisfactory mechanical stability, enhanced reliability, and extended service life.

Controllable Broadband Optical Transparency and Wettability Switching of Temperature-Activated Solid/Liquid-Infused Nanofibrous Membranes

Inspired by biointerfaces, such as the surfaces of lotus leaves and pitcher plants, researchers have developed innovative strategies for controlling surface wettability and transparency. In particular, great success has been achieved in obtaining low adhesion and high transmittance via the introduction of a liquid layer to form liquid-infused surfaces. Furthermore, smart surfaces that can change their surface properties according to external stimuli have recently attracted substantial interest. As some of the best-performing smart surface materials, slippery liquid-infused porous surfaces (SLIPSs), which are super-repellent, demonstrate the successful achievement of switchable adhesion and tunable transparency that can be controlled by a graded mechanical stimulus. However, despite considerable efforts, producing temperature-responsive, super-repellent surfaces at ambient temperature and pressure remains difficult because of the use of nonreactive lubricant oil as a building block in previously investigated repellent surfaces. Therefore, the present study focused on developing multifunctional materials that dynamically adapt to temperature changes. Here, we demonstrate temperature-activated solidifiable/liquid paraffin-infused porous surfaces (TA-SLIPSs) whose transparency and control of water droplet movement at room temperature can be simultaneously controlled. The solidification of the paraffin changes the surface morphology and the size of the light-transmission inhibitor in the lubricant layer; as a result, the control over the droplet movement and the light transmittance at different temperatures is dependent on the solidifiable/liquid paraffin mixing ratio. Further study of such temperature-responsive, multifunctional systems would be valuable for antifouling applications and the development of surfaces with tunable optical transparency for innovative medical applications, intelligent windows, and other devices.

Fluorine-free superwetting systems: construction of environmentally friendly superhydrophilic, superhydrophobic, and slippery surfaces on various substrates

Herein we present a simple, substrate-independent, completely fluorine free and environmental-friendly concept for construction of various super-wetting systems.