Flexible Zirconium MOF as the Crystalline Sponge for Coordinative Alignment of Dicarboxylates

Ionic Liquid Modified Fe-Porphyrinic Metal-Organic Frameworks as Efficient and Selective Photocatalysts for CO2 Reduction

Porphyrin-based metal-organic frameworks (MOFs) are ideal platforms for heterogeneous photocatalysts toward CO2 reduction. To further explore photocatalytic MOF systems, it is also necessary to consider their ability to fine-tune the microenvironments of the active sites, which affects their overall catalytic operation. Herein, a kind of ionic liquid (IL, here is 3-butyric acid-1-methyl imidazolium bromide, BAMeImBr) was anchored to iron-porphyrinic Zr-MOFs with different amounts to obtain ILx@MOF-526 (MOF-526 = Zr6O4(OH)4(FeTCBPP)3, FeTCBPP = iron 5,10,15,20-tetra[4-(4'-carboxyphenyl)phenyl]-porphyrin, x = 100, 200, and 400). ILx@MOF-526 series was designed to investigate the effects of the microenvironmental and electronic structural modification on the efficiency and selectivity of the photochemical reduction of CO2 after introducing IL fragments. Compared to parent MOF-526, the production and selectivity of CO were greatly improved in the absence of any photosensitizer under visible light by the ILx@MOF-526 series. Among them, the CO yield of IL200@MOF-526 was up to 14.0 mmol g-1 within 72 h with a remarkable CO selectivity of 97%, which is superior to that of MOF-526 without BAMeIm+ modification and other amounts of BAMeIm+ loaded. Furthermore, density functional theory calculations were performed to study the mechanism of the CO2 reduction.

Effect of Extra-Framework Anion Substitution on the Properties of a Chiral Crystalline Sponge

Chiral metal-organic materials, CMOMs, are of interest as they can offer selective binding sites for chiral guests. Such binding sites can enable CMOMs to serve as chiral crystalline sponges (CCSs) to determine molecular structure and/or purify enantiomers. We recently reported on the chiral recognition properties of a homochiral cationic diamondoid, dia, network {[Ni(S-IDEC)(bipy)(H2O)][NO3]}n (S-IDEC = S-indoline-2-carboxylicate, bipy = 4,4'-bipyridine), CMOM-5[NO3]. The modularity of CMOM-5[NO3] means there are five feasible approaches to fine-tune structures and properties via substitution of one or more of the following components: metal cation (Ni2+); bridging ligand (S-IDEC); linker (bipy); extra-framework anion (NO3-); and terminal ligand (H2O). Herein, we report the effect of anion substitution on the CCS properties of CMOM-5[NO3] by preparing and characterizing {[Ni(S-IDEC)(bipy)(H2O)][BF4]}n, CMOM-5[BF4]. The chiral channels in CMOM-5[BF4] enabled it to function as a CCS for determination of the absolute crystal structures of both enantiomers of three chiral compounds: 1-phenyl-1-butanol (1P1B); methyl mandelate (MM); ethyl mandelate (EM). Chiral resolution experiments revealed CMOM-5[BF4] to be highly selective toward the S-isomers of MM and EM with enantiomeric excess, ee, values of 82.6 and 78.4%, respectively. The ee measured for S-EM surpasses the 64.3% exhibited by [DyNaL(H2O)4] 6H2O and far exceeds that of CMOM-5[NO3] (6.0%). Structural studies of the binding sites in CMOM-5[BF4] provide insight into their high enantioselectivity.

Effector-dependent structural transformation of a crystalline framework with allosteric effects on molecular recognition ability

Structurally flexible porous crystals that combine high regularity and stimuli responsiveness have received attracted attention in connection with natural allostery found in regulatory systems of activity and function in biological systems. Porous crystals with molecular recognition sites in the inner pores are particularly promising for achieving elaborate functional control, where the local binding of effectors triggers their distortion to propagate throughout the structure. Here we report that the structure of a porous molecular crystal can be allosterically controlled by local adsorption of effectors within low-symmetry nanochannels with multiple molecular recognition sites. The exchange of effectors at the allosteric site triggers diverse conversion of the framework structure in an effector-dependent manner. In conjunction with the structural conversion, it is also possible to switch the molecular affinity at different recognition sites. These results may provide a guideline for the development of supramolecular materials with flexible and highly-ordered three-dimensional structures for biological applications.

A sensing platform for on-site detection of glutathione S-transferase using oxidized Pi@Ce-doped Zr-based metal-organic frameworks(MOFs)

The development of point-of-care testing (POCT) for glutathione S-transferase (GST) is an effective way to establish the mechanism of targeted monitoring of cancer chemotherapy drug metabolism. Assays for GST with high sensitivity as well as on-site screening have been urgently required to monitor this process. Herein, we synthesized oxidized Pi@Ce-doped Zr-based metal-organic frameworks (MOFs) by electrostatic self-assembly between phosphate and oxidized Ce-doped Zr-based MOFs. It was found that the oxidase-like activity of oxidized Pi@Ce-doped Zr-based MOFs was substantially increased after phosphate ion (Pi) assembly. And a stimulus-responsive hydrogel-based kit was constructed by embedding oxidized Pi@Ce-doped Zr-based MOFs into a PVA (polyvinyl alcohol) hydrogel system, we integrated a portable hydrogel kit with a smartphone for real-time monitoring of GST for quantitative and accurate analysis. The color reaction was triggered based on oxidized Pi@Ce-doped Zr-based MOFs with 3,3',5,5'-tetramethylbenzidine (TMB). However, in the presence of glutathione (GSH), the above color reaction was hindered due to the reducibility of GSH. Catalyzed by GST, GSH can react with 1-chloro-2,4-dinitrobenzo (CDNB) to form an adduct, which caused the color reaction to occur again, resulting in the color response of the kit. In combination with ImageJ software, the kit image information acquired by smartphone could be converted into hue intensity, providing a direct quantitative tool for the detection of GST with a detection limit of 0.19mU·L^-1. Based on the advantages of simple operation and cost-effectiveness, the introduction of the POCT miniaturized biosensor platform will meet the requirements of on-site quantitative analysis of GST.

High-Rate and Selective CO2 Electrolysis to Ethylene via Metal-Organic-Framework-Augmented CO2 Availability

High-rate conversion of carbon dioxide (CO₂ ) to ethylene (C₂ H₄ ) in the CO₂ reduction reaction (CO₂ RR) requires fine control over the phase boundary of the gas diffusion electrode (GDE) to overcome the limit of CO₂ solubility in aqueous electrolytes. Here, a metal-organic framework (MOF)-functionalized GDE design is presented, based on a catalysts:MOFs:hydrophobic substrate materials layered architecture, that leads to high-rate and selective C₂ H₄ production in flow cells and membrane electrode assembly (MEA) electrolyzers. It is found that using electroanalysis and operando X-ray absorption spectroscopy (XAS), MOF-induced organic layers in GDEs augment the local CO₂ concentration near the active sites of the Cu catalysts. MOFs with different CO₂ adsorption abilities are used, and the stacking ordering of MOFs in the GDE is varied. While sputtering Cu on poly(tetrafluoroethylene) (PTFE) (Cu/PTFE) exhibits 43% C₂ H₄ Faradaic efficiency (FE) at a current density of 200 mA cm^{- 2} in a flow cell, 49% C₂ H₄ FE at 1 A cm^{- 2} is achieved on MOF-augmented GDEs in CO₂ RR. MOF-augmented GDEs are further evaluated in an MEA electrolyzer, achieving a C₂ H₄ partial current density of 220 mA cm^-2 for CO₂ RR and 121 mA cm^-2 for the carbon monoxide reduction reaction (CORR), representing 2.7-fold and 15-fold improvement in C₂ H₄ production rate, compared to those obtained on bare Cu/PTFE.

Carbazole-Equipped Metal-Organic Framework for Stability, Photocatalysis, and Fluorescence Detection

The useful yet underutilized backfolded design is invoked here for functionalizing porous solids with the versatile carbazole function. Specifically, we attach carbazole groups as backfolded side arms onto the backbone of a linear dicarboxyl linker molecule. The bulky carbazole side arms point away from the carboxyl links and do not disrupt the Zr-carboxyl framework formation; namely, the resultant MOF solid ZrL1 features the same net as that of the unfunctionalized dicarboxyl linker, also known as the PCN-111 net or UiO-66 net. The ZrL1 structure features only half linker occupancy (about 6 out of the 12 linkers around the Zr₆O₈ cluster being missing) and partially collapses upon activation (acetone exchange and evacuation). Notably, the stability improves after heating in diphenyl oxide at 260 °C (POP-260 treatment; to form ZrL1-260), as indicated by the higher crystallinity and surface area of the activated ZrL1-260 sample. The ZrL1-260 samples achieve 72% yield in photocatalyzing reductive dehalogenation of phenacyl bromide; ZrL1 can detect nitro-aromatic compounds via fluorescence quenching, with selectivity and sensitivity toward 4-nitroaniline, featuring a limit of detection of 96 ppb.

Recent advances in the tuning of the organic framework materials - The selections of ligands, reaction conditions, and post-synthesis approaches

Organic framework materials, particularly metal-organic frameworks (MOFs), graphene-organic frameworks (GOFs), and covalent organic frameworks (COFs), have led to the revolution across fields including catalysts, sensors, gas capture, and biology mainly owing to their ultra-high surface area-to-volume ratio, on-demand tunable crystal structures, and unique surface properties. While the wet chemistry routes have been the predominant synthesis approach, the crystal phase, morphological parameters, and physicochemical properties of organic framework materials are largely affected by various synthesis parameters and precursors. In this work, we specifically review the influences of synthesis parameters towards crystal structures and chemical compositions of organic framework materials, including selected ligand types and lengths, reaction temperature/solvent/reactant compositions, as well as post-synthesis modification approaches. More importantly, the subsequent impacts on the general electronic, mechanical, surface chemical, and thermal properties as well as the consequent variation in performances towards catalytic, desalination, gas sensing, and gas storage applications are critically discussed. Finally, the current challenges and prospects of organic framework materials are provided.

Flexible metal-organic frameworks for gas storage and separation

Flexible metal-organic frameworks (MOFs) have gradually attracted much attention due to their reversible structural changes and flexible structural responses. The basic research of flexible MOFs is to study their dynamic responses under different external stimuli and translate the responses into applications. Most research studies on flexible MOFs focus on gas storage and separation, but lack a systematic summary. Here, we review the development of flexible MOFs, the structural transformation under the external effects of temperature, pressure, and guest molecules, and their applications in gas storage and separation. Microporous MOFs with flexible structures provide unique opportunities for fine-tuning their performance because the pore shape and size can be controlled by external stimuli. The characteristics of breathing phenomena and large specific surface area make flexible MOFs suitable candidates for gas storage and separation. Finally, the application prospects of flexible MOFs are reported.

Spiers Memorial Lecture: Coordination networks that switch between nonporous and porous structures: an emerging class of soft porous crystals

Coordination networks (CNs) are a class of (usually) crystalline solids typically comprised of metal ions or cluster nodes linked into 2 or 3 dimensions by organic and/or inorganic linker ligands. Whereas CNs tend to exhibit rigid structures and permanent porosity as exemplified by most metal-organic frameworks, MOFs, there exists a small but growing class of CNs that can undergo extreme, reversible structural transformation(s) when exposed to gases, vapours or liquids. These "soft" or "stimuli-responsive" CNs were introduced two decades ago and are attracting increasing attention thanks to two features: the amenability of CNs to design from first principles, thereby enabling crystal engineering of families of related CNs; and the potential utility of soft CNs for adsorptive storage and separation. A small but growing subset of soft CNs exhibit reversible phase transformations between nonporous (closed) and porous (open) structures. These "switching CNs" are distinguished by stepped sorption isotherms coincident with phase transformation and, perhaps counterintuitively, they can exhibit benchmark properties with respect to working capacity (storage) and selectivity (separation). This review addresses fundamental and applied aspects of switching CNs through surveying their sorption properties, analysing the structural transformations that enable switching, discussing structure-function relationships and presenting design principles for crystal engineering of the next generation of switching CNs.

Symmetry Breaking and Autocatalytic Amplification in Soai Reaction Confined within UiO-MOFs under Heterogenous Conditions

Symmetry breaking is observed in the Soai reaction in a confinement environment provided by zirconium‐based UiO‐MOFs used as crystalline sponges. Subsequent reaction of encapsulated Soai aldehyde with Zn(i‐Pr)₂ vapour promoted absolute asymmetric synthesis of the corresponding alkanol. ATR‐IR and NMR confirm integration of aldehyde into the porous material, and a similar localization of newly formed chiral alkanol after reaction. Despite the confinement, the Soai reaction exhibits significant activity and autocatalytic amplification. Comparative catalytic studies with various UiO‐MOFs indicate different outcomes in terms of enantiomeric excess, handedness distribution of the product and reaction rate, when compared to pristine solid Soai aldehyde, while the crystalline MOF remains highly stable to action of Zn(iPr)₂ vapour. This is an unprecedented example of absolute asymmetric synthesis using MOFs.

Crystalline sponge X-ray analysis coupled with supercritical fluid chromatography: a novel analytical platform for the rapid separation, isolation, and characterization of analytes

Crystalline sponge (CS) based X-ray diffraction (XRD) analysis allows for the observation of the structure of an analyte, including its absolute configuration. Herein we report a powerful analytical platform for the separation, isolation, and structural elucidation of a target analyte in a seamless way by coupling supercritical fluid chromatography (SFC) with CS-based XRD analysis (SFC-CSXRD). The efficacy of this methodology is demonstrated by the rapid characterization of regio- and stereoisomers using three types of CSs with differing tolerances to the solvents used in SFC and guest-soaking.

Crystalline Sponge Method: X-ray Structure Analysis of Small Molecules by Post-Orientation within Porous Crystals-Principle and Proof-of-Concept Studies

This Review discusses, along with the historical background, the principles as well as proof-of-concept studies of the crystalline sponge (CS) method, a new single-crystal X-ray diffraction (SCXRD) method for the analysis of the structures of small molecules without sample crystallization. The method uses single-crystalline porous coordination networks (crystalline sponges) that can absorb small guest molecules within their pores. The absorbed guest molecules are ordered in the pores through molecular recognition and become observable by conventional SCXRD analysis. The complex {[(ZnI₂ )₃ (tpt)₂ ]⋅x(solvent)}_n (tpt=tris(4-pyridyl)-1,3,5-triazine) was first proposed as a crystalline sponge and has been most generally used. Crystalline sponges developed later are also discussed here. The principle of the CS method can be described as "post-crystallization" of the absorbed guest, whose ordering is templated by the pre-latticed cavities. The method has been widely applied to synthetic chemistry as well as natural product studies, for which proof-of-concept examples will be shown here.

Facile Strategy for Efficient Charge Separation and High Photoactivity of Mixed-Linker MOFs

Two new sets of UiO-Zr metal-organic framework (MOF) bearing mixed linkers BDC-(SCH₃)₂ and BDC-(SOCH₃)₂ that have different band gaps and edges were prepared through post oxidation and direct methods, namely, UiO-66-(SCH₃)₂-xh (x = 4, 9, 12 oxidation hours) and UiO-66-(SOCH₃)_x(SCH₃)_2-x (x = 0, 0.4, 0.6, 2), respectively. These composites with stoichiometric components were fully characterized via proton nuclear magnetic resonance (¹H NMR) spectroscopy, powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), Fourier-transform infrared (FT-IR) spectra, Brunauer-Emmett-Teller (BET), photo electrochemical measurements, and femtosecond transient absorption (fs-TA) spectroscopy. The structure, electronic property, and photoresponsive and catalytic ability as the functions of the molar ratio of linkers and the synthetic protocol were first investigated. The mixed-linker UiO-66-(SCH₃)₂-xh and UiO-66-(SOCH₃)_x(SCH₃)_2-x exhibited improved performances as compared to the UiO-66-(SCH₃)₂ and UiO-66-(SOCH₃)₂ possessing neat linkers only. Their photo response and catalytic activity varied with different linker ratios. For UiO-66-(SCH₃)₂-xh, the performance increased with the increasing linker BDC-(SOCH₃)₂ ratio upon oxidation but reached the highest as the BDC-(SOCH₃)₂ being of 24.4% in UiO-66-(SCH₃)₂-9h. In comparison, the best photocurrent (80.74 uA/cm^-2) and the highest H₂ generation rate (2018.8 μmol g^-1 h^-1) (λ > 400 nm) in UiO-66-(SCH₃)₂-9h are about twice those of UiO-66-(SOCH₃)_0.4(SCH₃)_1.6 obtained by direct synthesis, although the linker BDC-(SOCH₃)₂ ratio of those two composites is almost the same (24.4% vs 23.9%). Recorded shorter lifetime and higher charge separation efficiency of the former than those of the latter suggest the postsynthetic protocol as the efficient method for achieving the mixed-liner-MOF-based photocatalyst with high performance. A new type-II tailored homojunction is proposed in these mixed-linker MOFs for their efficient charge separation and improved activity.

Invisible Silver Guests Boost Order in a Framework That Cyclizes and Deposits Ag3Sb Nanodots

The infusion of metal guests into (i.e., metalating) the porous medium of metal-organic frameworks (MOFs) is a topical approach to wide-ranging functionalization purposes. We report the notable interactions of AgSbF₆ guests with the designer MOF host ZrL1 [Zr₆O₄(OH)₇(L1)_4.5(H₂O)₄]. (1) The heavy-atom guests of AgSbF₆ induce order in the MOF host to allow the movable alkyne side arm to be fully located by X-ray diffraction, but they themselves curiously remain highly disordered and absent in the strucutral model. The enhanced order of the framework can be generally ascribed to interaction of the silver guests with the host alkyne and thioether functions, while the invisible heavy-atom guest represents a new phenomenon in the metalation of open framework materials. (2) The AgSbF₆ guests also participate in the thermocyclization of the vicinal alkyne units of the L1 linker (at 450 °C) and form the rare nanoparticle of Ag₃Sb supported on the concomitantly formed nanographene network. The resulted composite exhibits high electrical conductivity (1.0 S/cm) as well as useful, mitigated catalytic activity for selectively converting nitroarenes into the industrially important azo compounds, i.e., without overshooting to form the amine side products. The heterogeneous/cyclable catalysis entails only the cheap reducing reagents of NaBH₄, ethanol, and water, with yields being generally close to 90%.

Linker Deficiency, Aromatic Ring Fusion, and Electrocatalysis in a Porous Ni8-Pyrazolate Network

The cruciform linker molecule here features two designer functions: the pyrazole donors for framework construction, and the vicinal alkynyl units for benzannulation to form nanographene units into the Ni₈-pyrazolate scaffold. Unlike the full 12 connections of the Ni₈(OH)₄(H₂O)₂ clusters in other Ni₈-pyrazolate networks, significant linker deficiency was observed here, leaving about half of the Ni(II) sites capped by acetate ligands, which can be potentially removed to open the metal sites for reactivity. The crystalline Ni₈-pyrazolate scaffold also retains the crystalline order even after thermal treatments (up to 300 °C) that served to partially graphitize the neighboring alkyne units. The resultant nanographene components enhance the electroactive properties of the porous hosts, achieving hydrogen evolution reaction (HER) activity that rivals that of topical nickel/palladium-enabled materials.

Metal-Organic Frameworks as a Platform for CO2 Capture and Chemical Processes: Adsorption, Membrane Separation, Catalytic-Conversion, and Electrochemical Reduction of CO2

The continuous rise in the atmospheric concentration of carbon dioxide gas (CO2) is of significant global concern. Several methodologies and technologies are proposed and applied by the industries to mitigate the emissions of CO2 into the atmosphere. This review article offers a large number of studies that aim to capture, convert, or reduce CO2 by using a superb porous class of materials (metal-organic frameworks, MOFs), aiming to tackle this worldwide issue. MOFs possess several remarkable features ranging from high surface area and porosity to functionality and morphology. As a result of these unique features, MOFs were selected as the main class of porous material in this review article. MOFs act as an ideal candidate for the CO2 capture process. The main approaches for capturing CO2 are pre-combustion capture, post-combustion capture, and oxy-fuel combustion capture. The applications of MOFs in the carbon capture processes were extensively overviewed. In addition, the applications of MOFs in the adsorption, membrane separation, catalytic conversion, and electrochemical reduction processes of CO2 were also studied in order to provide new practical and efficient techniques for CO2 mitigation.

Crystallinity after decarboxylation of a metal-carboxylate framework: indestructible porosity for catalysis

We report a curious case study of a Zr(iv)-carboxylate framework, which retains significant crystalline order after cascade thermocyclization of its linker components, and - more notably - after the crucial carboxylate links were severed by heat. Vigorous heat treatment (e.g., 450 °C and above) benzannulates the multiple alkyne groups on the linker to generate linked nanographene blocks and to afford real stability. The resultant Zr oxide/nanographene hybrid solid is stable in saturated NaOH and concentrated H₃PO₄, allowing a convenient anchoring of H₃PO₄ into its porous matrix to enable size-selective heterogeneous acid catalysis. The Zr oxide components can also be removed by strong hydrofluoric acid to further enhance the surface area (up to 650 m² g^-1), without collapsing the nanographene scaffold. The crystallinity order and the extensive thermal transformations were characterized by X-ray diffraction, scanning transmission electron microscopy (STEM), IR, solid state NMR and other instrumental methods.

Building Conjugated Donor-Acceptor Cross-Links into Metal-Organic Frameworks for Photo- and Electroactivity

We convert a coordination network into a covalent solid, while maintaining the crystallinity and greatly enhancing the framework rigidity and redox-active and photochemical properties. Specifically, intensely light-absorbing push-pull functions are postsynthetically installed by reacting the electrophilic TCNE (tetracyanoethylene) guests and the electron-rich alkyne side arms on a microporous Zr-organic framework, generating black microporous crystallites with a band gap smaller than 1.0 eV. The reaction proceeds in the known [2 + 2] cycloaddition-retroelectrocyclization mechanism and extensively establishes conjugated (polyene) bridges across the linker molecules. The donor (4-methoxyphenyl) and acceptor (dicyanovinyl) couples of the polyene bridges also act as an efficient fluorescent quencher and can be selectively installed in a thin outer layer of the host crystallite to form a core-shell assembly for turn-on fluorescent sensing of small amine molecules in water solutions.

Peanut Leaf-Inspired Hybrid Metal-Organic Framework with Humidity-Responsive Wettability: toward Controllable Separation of Diverse Emulsions

Damage to the responsive superwetting material by external stimuli during the responsive process has been a ticklish question in recent years. We overcome this barrier by imitating a peanut leaf and designing a humidity-responsive MIL-100 (Fe)/octadecylamine-coated stainless steel mesh (HR-MOS). Such a material shows superhydrophilicity when ambient humidity is higher than saturated humidity, while it shows superhydrophobicity and high adhesion to water when ambient humidity is lower than saturated humidity. The peanut leaf-like two-level nanostructure of MIL-100 (Fe) is speculated as the principal factor to bring about the binary synergy wettability of the material. Accordingly, the material can realize humidity-controlled separation of at least 12 types of emulsions along with satisfactory durability. The responsive condition of the material is mild and green, which does lower damage to the material and environment. This strategy is the first to realize humidity-responsive wettability transition and provides a novel approach for manually controlled environmental protection.

Cocrystallization with a clip-type molecule catcher: a new method to determine structures of liquid molecules

In order to measure the precise structure of liquid molecules by X-ray single-crystal diffraction, we report a new and easy method using a glycoluril-derived molecular clip as a molecule catcher to form cocrystals with liquid molecules.

Rational modifications of PCN-700 to induce electrical conductivity: a computational study

Using computational methods, rational modifications of PCN-700 are performed to newly induce electrical conductivity in a previously insulating metal–organic framework.

Hydrogen-bonded frameworks for molecular structure determination

Single crystal X-ray diffraction is arguably the most definitive method for molecular structure determination, but the inability to grow suitable single crystals can frustrate conventional X-ray diffraction analysis. We report herein an approach to molecular structure determination that relies on a versatile toolkit of guanidinium organosulfonate hydrogen-bonded host frameworks that form crystalline inclusion compounds with target molecules in a single-step crystallization, complementing the crystalline sponge method that relies on diffusion of the target into the cages of a metal-organic framework. The peculiar properties of the host frameworks enable rapid stoichiometric inclusion of a wide range of target molecules with full occupancy, typically without disorder and accompanying solvent, affording well-refined structures. Moreover, anomalous scattering by the framework sulfur atoms enables reliable assignment of absolute configuration of stereogenic centers. An ever-expanding library of organosulfonates provides a toolkit of frameworks for capturing specific target molecules for their structure determination.

An effective strategy for creating asymmetric MOFs for chirality induction: a chiral Zr-based MOF for enantioselective epoxidation

A simple and rapid procedure was used to prepare chiral NU-1000 as a robust Zr-based MOF without complexity. The functionalization of NU-1000 was performed by utilizing chirall-(+)-tartaric acidviasolvent-assisted linker incorporation, resulting in [C-NU-1000]. A Mo-complex was immobilized onto chiral NU-1000 for enantioselective epoxidation.

Site-Directed Synthesis of Cobalt Oxide Clusters in a Metal-Organic Framework

Direct control over structure and location of catalytic species deposited on amorphous supports represents a formidable challenge in heterogeneous catalysis. In contrast, a structurally well-defined, crystalline metal-organic framework (MOF) can be rationally designed using postsynthetic techniques to allow for desired structural or locational changes of deposited metal ions. Herein, naphthalene dicarboxylate linkers are incorporated in the MOF, NU-1000, to block the small cavities where few-atom clusters of cobalt oxide preferentially grow, inducing catalyst deposition toward hitherto ill-favored grafting sites orientated toward NU-1000s mesoporous channels. Despite the different cobalt oxide location, the resulting material is still an active propane oxidative dehydrogenation catalyst at low temperature, reaching a turnover frequency of 0.68 ± 0.05 h^-1 at 230 °C and confirming the utility of MOFs as crystalline supports to guide rational design of catalysts.

The growing importance of crystalline molecular flasks and the crystalline sponge method

This article showcases recent advancements made using crystalline molecular flasks and the widening list of prospective applications for the crystalline sponge method. This expansion has coincided with an increasing number of materials termed crystalline sponges, and a report of a predictive means of identifying candidates from crystallographic databases. The crystalline sponge method's primary application has been determination of absolute configuration, and this has evolved from the analysis of carefully chosen planar aromatic guests to more diverse identification of natural products, biological metabolites, and analysis of volatile chemical components. However with time-resolved X-ray crystallography providing arguably the most informative atomic scale insights of dynamic chemical processes, this application of the crystalline sponge method may soon eclipse structural determination in terms of importance.

[Ti8Zr2O12(COO)16] Cluster: An Ideal Inorganic Building Unit for Photoactive Metal-Organic Frameworks

Metal-organic frameworks (MOFs) based on Ti-oxo clusters (Ti-MOFs) represent a naturally self-assembled superlattice of TiO₂ nanoparticles separated by designable organic linkers as antenna chromophores, epitomizing a promising platform for solar energy conversion. However, despite the vast, diverse, and well-developed Ti-cluster chemistry, only a scarce number of Ti-MOFs have been documented. The synthetic conditions of most Ti-based clusters are incompatible with those required for MOF crystallization, which has severely limited the development of Ti-MOFs. This challenge has been met herein by the discovery of the [Ti₈Zr₂O₁₂(COO)₁₆] cluster as a nearly ideal building unit for photoactive MOFs. A family of isoreticular photoactive MOFs were assembled, and their orbital alignments were fine-tuned by rational functionalization of organic linkers under computational guidance. These MOFs demonstrate high porosity, excellent chemical stability, tunable photoresponse, and good activity toward photocatalytic hydrogen evolution reactions. The discovery of the [Ti₈Zr₂O₁₂(COO)₁₆] cluster and the facile construction of photoactive MOFs from this cluster shall pave the way for the development of future Ti-MOF-based photocatalysts.

A robust two-dimensional zirconium-based luminescent coordination polymer built on a V-shaped dicarboxylate ligand for vapor phase sensing of volatile organic compounds

We report herein a new two-dimensional zirconium-based luminescent coordination polymer exhibiting selective fluorescence responses towards a variety of volatile organic compounds upon exposure in the vapor phase.

Dye@bio-MOF-1 Composite as a Dual-Emitting Platform for Enhanced Detection of a Wide Range of Explosive Molecules

By incorporating a cationic dye within a metal-organic framework (MOF) through an ion-exchange process, a responsive dye@bio-MOF-1 composite has been synthesized, serving as a dual-emitting platform for enhanced detection of different kinds of nitro-explosives, especially nitroalkanes, nitramines, and nitrate esters. The dye@bio-MOF-1 composite was constructed with free amines on their well-defined cavities, which is essential for the capture of explosives into their confined nanospace. It was observed that the encapsulation of explosives into the constructed dye@bio-MOF-1 composite could dramatically alter the luminescent properties of the dyes as well as the MOF skeletons owing to the size exclusivity and confinement-induced effect. For nitroaromatics, the dye@bio-MOF-1 composite exhibits turn-off responses via fluorescence quenching. Unexpectedly, the composite shows unique turn-on responses for aliphatic nitro-organics via confinement-induced enhancement, demonstrating enhanced ability to detecting different kinds of explosives selectively in aqueous solution. Furthermore, the dye@bio-MOF-1 film was facilely fabricated, making the chemical sensing more convenient and easier to realize the discrimination of the targeted explosives. The dual tunable responses indicate that dye@bio-MOF-1 composites are favorable materials for molecular sensing. On the basis of the host-guest properties of the constructed dye@bio-MOF-1 composite, our work can be further extended to sensing specific analytes with remarkable turn-on sensing properties, in particular those difficult to recognize with conventional methods.