Visible-Light Neural Stimulation on Graphitic-Carbon Nitride/Graphene Photocatalytic Fibers

Palladium-reduced graphene oxide nanocomposites enhance neurite outgrowth and protect neurons from Ishemic stroke

Currently, the construction of novel biomimetic reduced graphene oxide (RGO)-based nanocomposites to induce neurite sprouting and repair the injured neurons represents a promising strategy in promoting neuronal development or treatment of cerebral anoxia or ischemia. Here, we present an effective method for constructing palladium-reduced graphene oxide (Pd-RGO) nanocomposites by covalently bonding Pd onto RGO surfaces to enhance neurite sprouting of cultured neurons. As described, the Pd-RGO nanocomposites exhibit the required physicochemical features for better biocompatibility without impacting cell viability. Primary neurons cultured on Pd-RGO nanocomposites had significantly increased number and length of neuronal processes, including both axons and dendrites, compared with the control. Western blotting showed that Pd-RGO nanocomposites improved the expression levels of growth associate protein-43 (GAP-43), as well as β-III tubulin, Tau-1, microtubule-associated protein-2 (MAP2), four proteins that are involved in regulating neurite sprouting and outgrowth. Importantly, Pd-RGO significantly promoted neurite length and complexity under oxygen-glucose deprivation/re-oxygenation (OGD/R) conditions, an in vitro cellular model of ischemic brain damage, that closely relates to neuronal GAP-43 expression. Furthermore, using the middle cerebral artery occlusion (MCAO) model in rats, we found Pd-RGO effectively reduced the infarct area, decreased neuronal apoptosis in the brain, and improved the rats' behavioral outcomes after MCAO. Together, these results indicate the great potential of Pd-RGO nanocomposites as a novel excellent biomimetic material for neural interfacing that shed light on its applications in brain injuries.

Trichome-Like Biomimetic Air Filters via Templated Silicone Nanofilaments

Air pollution threats to human health have increased awareness of the role of filter units in air cleaning applications. As an ideal energy-saving strategy for air filters, the slip effect on nanofiber surfaces can potentially overcome the trade-off between filtration efficiency and pressure drop. However, the potential of the slip effect in nanofibrous structures is significantly limited by the tight nanofiber stacks. In this study, trichome-like biomimetic (TLB) air filters with 3D-templated silicone nanofilaments (average diameter: ≈74 nm) are prepared based on an in situ chemical vapor deposition (CVD) method inspired by plant purification. Theoretical modeling and experimental results indicate that TLB air filters make significant use of the slip effect to overcome the efficiency-resistance tradeoff. The selectable filter class (up to U15, ≈99.9995%) allows TLB air filters to meet various requirements, and their integral filtration performance surpasses that of most commodity air filters, including melt-blown cloth, ePTFE membranes, electrospun mats, and glass fiber paper. The proposed strategy directly transforms commercial filter media and filters into TLB air filters using a bottom-up, one-step approach. As a proof-of-concept, reusable N95 respirators and air purifiers equipped with TLB air filters are fabricated, overcoming the limitations of existing filter designs and fabrication methods.

Control of Neuronal Survival and Development Using Conductive Diamond

This study demonstrates the control of neuronal survival and development using nitrogen-doped ultrananocrystalline diamond (N-UNCD). We highlight the role of N-UNCD in regulating neuronal activity via near-infrared illumination, demonstrating the generation of stable photocurrents that enhance neuronal survival and neurite outgrowth and foster a more active, synchronized neuronal network. Whole transcriptome RNA sequencing reveals that diamond substrates improve cellular-substrate interaction by upregulating extracellular matrix and gap junction-related genes. Our findings underscore the potential of conductive diamond as a robust and biocompatible platform for noninvasive and effective neural tissue engineering.

Defect-Rich SnO2 Nanofiber as an Oxygen-Defect-Driven Photoenergy Shield against UV Light Cell Damage

Usually, most studies focus on toxic gas and photosensors by using electrospinning and metal oxide polycrystalline SnO2 nanofibers (PNFs), while fewer studies discuss cell-material interactions and photoelectric effect. In this work, the controllable surface morphology and oxygen defect (VO) structure properties were provided to show the opportunity of metal oxide PNFs to convert photoenergy into bio-energy for bio-material applications. Using the photobiomodulation effect of defect-rich polycrystalline SnO2 nanofibers (PNFs) is the main idea to modulate the cell-material interactions, such as adhesion, growth direction, and reactive oxygen species (ROS) density. The VO structures, including out-of-plane oxygen defects (op-VO), bridge oxygen defects (b-VO), and in-plane oxygen defects (ip-VO), were studied using synchrotron analysis to investigate the electron transfer between the VO structures and conduction bands. These intragrain VO structures can be treated as generation-recombination centers, which can convert various photoenergies (365-520 nm) into different current levels that form distinct surface potential levels; this is referred to as the photoelectric effect. PNF conductivity was enhanced 53.6-fold by enlarging the grain size (410 nm2) by increasing the annealing temperature, which can improve the photoelectric effect. In vitro removal of reactive oxygen species (ROS) can be achieved by using the photoelectric effect of PNFs. Also, the viability and shape of human bone marrow mesenchymal stem cells (hMSCs-BM) were also influenced significantly by the photobiomodulation effect. The cell damage and survival rate can be prevented and enhanced by using PNFs; metal oxide nanofibers are no longer only environmental sensors but can also be a bio-material to convert the photoenergy into bio-energy for biomedical science applications.

Engineering optical tools for remotely controlled brain stimulation and regeneration

Neurological disorders are one of the world's leading medical and societal challenges due to the lack of efficacy of the first line treatment. Although pharmacological and non-pharmacological interventions have been employed with the aim of regulating neuronal activity and survival, they have failed to avoid symptom relapse and disease progression in the vast majority of patients. In the last 5 years, advanced drug delivery systems delivering bioactive molecules and neuromodulation strategies have been developed to promote tissue regeneration and remodel neuronal circuitry. However, both approaches still have limited spatial and temporal precision over the desired target regions. While external stimuli such as electromagnetic fields and ultrasound have been employed in the clinic for non-invasive neuromodulation, they do not have the capability of offering single-cell spatial resolution as light stimulation. Herein, we review the latest progress in this area of study and discuss the prospects of using light-responsive nanomaterials to achieve on-demand delivery of drugs and neuromodulation, with the aim of achieving brain stimulation and regeneration.

Injectable 2D flexible hydrogel sheets for optoelectrical/biochemical dual stimulation of neurons

Major challenges in developing implanted neural stimulation devices are the invasiveness, complexity, and cost of the implantation procedure. Here, we report an injectable, nanofibrous 2D flexible hydrogel sheet-based neural stimulation device that can be non-invasively implanted via syringe injection for optoelectrical and biochemical dual stimulation of neuron. Specifically, methacrylated gelatin (GelMA)/alginate hydrogel nanofibers were mechanically reinforced with a poly(lactide-co-ε-caprolactone) (PLCL) core by coaxial electrospinning. The lubricant hydrogel shell enabled not only injectability, but also facile incorporation of functional nanomaterials and bioactives. The nanofibers loaded with photocatatlytic g-C₃N₄/GO nanoparticles were capable of stimulating neural cells via blue light, with a significant 36.3 % enhancement in neurite extension. Meanwhile, the nerve growth factor (NGF) loaded nanofibers supported a sustained release of NGF with well-maintained function to biochemically stimulate neural differentiation. We have demonstrated the capability of an injectable, hydrogel nanofibrous, neural stimulation system to support neural stimulation both optoelectrically and biochemically, which represents crucial early steps in a larger effort to create a minimally invasive system for neural stimulation.

Self-snapping hydrogel-based electroactive microchannels as nerve guidance conduits

Peripheral nerve regeneration with large defects needs innovative design of nerve guidance conduits (NGCs) which possess anisotropic guidance, electrical induction and right mechanical properties in one. Herein, we present, for the first time, facile fabrication and efficient neural differentiation guidance of anisotropic, conductive, self-snapping, hydrogel-based NGCs. The hydrogels were fabricated via crosslinking of graphitic carbon nitride (g-C₃N₄) upon exposure with blue light, incorporated with graphene oxide (GO). Incorporation of GO and in situ reduction greatly enhanced surface charges, while decayed light penetration endowed the hydrogel with an intriguing self-snapping feature by the virtue of a crosslinking gradient. The hydrogels were in the optimal mechanical stiffness range for peripheral nerve regeneration and supported normal viability and proliferation of neural cells. The PC12 ​cells differentiated on the electroactive g-C₃N₄ H/rGO3 (3 ​mg/mL GO loading) hydrogel presented 47% longer neurite length than that of the pristine g-C₃N₄ H hydrogel. Furthermore, the NGC with aligned microchannels was successfully fabricated using sacrificial melt electrowriting (MEW) moulding, the anisotropic microchannels of the 10 ​μm width showed optimal neurite guidance. Such anisotropic, electroactive, self-snapping NGCs may possess great potential for repairing peripheral nerve injuries.

Soft nano and microstructures for the photomodulation of cellular signaling and behavior

Photoresponsive soft materials are everywhere in the nature, from human's retina tissues to plants, and have been the inspiration for engineers in the development of modern biomedical materials. Light as an external stimulus is particularly attractive because it is relatively cheap, noninvasive to superficial biological tissues, can be delivered contactless and offers high spatiotemporal control. In the biomedical field, soft materials that respond to long wavelength or that incorporate a photon upconversion mechanism are desired to overcome the limited UV-visible light penetration into biological tissues. Upon light exposure, photosensitive soft materials respond through mechanisms of isomerization, crosslinking or cleavage, hyperthermia, photoreactions, electrical current generation, among others. In this review, we discuss the most recent applications of photosensitive soft materials in the modulation of cellular behavior, for tissue engineering and regenerative medicine, in drug delivery and for phototherapies.

Visible-light-responsive reduced graphene oxide/g-C3N4/TiO2 composite nanocoating for photoelectric stimulation of neuronal and osteoblastic differentiation

rGO/g-C3N4/TiO2 nanocoating was fabricated on Ti-based implant for photoelectric stimulation of bone and nerve repair. The ternary nanocoating exerted greater photoelectric effects on enhancing osteoblastic differentiation and neurite outgrowth.

Photocatalytic Inactivation of Viruses Using Graphitic Carbon Nitride-Based Photocatalysts: Virucidal Performance and Mechanism

The prevalence of lethal viral infections necessitates the innovation of novel disinfection techniques for contaminated surfaces, air, and wastewater as significant transmission media of disease. The instigated research has led to the development of photocatalysis as an effective renewable solar-driven technology relying on the reactive oxidative species, mainly hydroxyl (OH●) and superoxide (O2●−) radicals, for rupturing the capsid shell of the virus and loss of pathogenicity. Metal-free graphitic carbon nitride (g-C3N4), which possesses a visible light active bandgap structure, low toxicity, and high thermal stability, has recently attracted attention for viral inactivation. In addition, g-C3N4-based photocatalysts have also experienced a renaissance in many domains, including environment, energy conversion, and biomedical applications. Herein, we discuss the three aspects of the antiviral mechanism, intending to highlight the advantages of photocatalysis over traditional viral disinfection techniques. The sole agenda of the review is to summarize the significant research on g-C3N4-based photocatalysts for viral inactivation by reactive oxidative species generation. An evaluation of the photocatalysis operational parameters affecting viral inactivation kinetics is presented. An overview of the prevailing challenges and sustainable solutions is presented to fill in the existing knowledge gaps. Given the merits of graphitic carbon nitride and the heterogeneous photocatalytic viral inactivation mechanism, we hope that further research will contribute to preventing the ongoing Coronavirus pandemic and future calamities.

Regulation of stem cell fate using nanostructure-mediated physical signals

One of the major issues in tissue engineering is regulation of stem cell differentiation toward specific lineages. Unlike biological and chemical signals, physical signals with adjustable properties can be applied to stem cells in a timely and localized manner, thus making them a hot topic for research in the fields of biomaterials, tissue engineering, and cell biology. According to the signals sensed by cells, physical signals used for regulating stem cell fate can be classified into six categories: mechanical, light, thermal, electrical, acoustic, and magnetic. In most cases, external macroscopic physical fields cannot be used to modulate stem cell fate, as only the localized physical signals accepted by the surface receptors can regulate stem cell differentiation via nanoscale fibrin polysaccharide fibers. However, surface receptors related to certain kinds of physical signals are still unknown. Recently, significant progress has been made in the development of functional materials for energy conversion. Consequently, localized physical fields can be produced by absorbing energy from an external physical field and subsequently releasing another type of localized energy through functional nanostructures. Based on the above concepts, we propose a methodology that can be utilized for stem cell engineering and for the regulation of stem cell fate via nanostructure-mediated physical signals. In this review, the combined effect of various approaches and mechanisms of physical signals provides a perspective on stem cell fate promotion by nanostructure-mediated physical signals. We expect that this review will aid the development of remote-controlled and wireless platforms to physically guide stem cell differentiation both in vitro and in vivo, using optimized stimulation parameters and mechanistic investigations while driving the progress of research in the fields of materials science, cell biology, and clinical research.

Enhanced the Efficiency of Photocatalytic Degradation of Methylene Blue by Construction of Z-Scheme g-C3N4/BiVO4 Heterojunction

Both non-metallic g-C3N4 and BiVO4 are novel photocatalysts responsive to visible light, but their low charge separation efficiency restricts their inconspicuous photocatalytic activity. In this paper, direct Z-type g-C3N4/BiVO4 photocatalyst was constructed by calcination and hydrothermal for the degradation of methylene blue. The existence of g-C3N4/BiVO4 heterojunction was confirmed by the detailed study of its chemical structure and morphology by various characterization methods, such as X-ray diffraction (XRD), Scanning electron microscope (SEM), and X-ray photoelectron spectroscopy (XPS). The evaluation of photocatalytic performance showed that the MB degradation performance of 1.0-CN/BVO was significantly enhanced, which was 4.528 times and 2.387 times higher than pristine BiVO4 and g-C3N4, respectively, which was mainly due to the enhanced light capture ability and effective electron transfer in the photocatalytic reaction. The 1.0-CN/BVO composite exhibited extremely catalytic stability and recyclability.

Chitosan functionalized graphene oxide nanocomposites for fluorescence imaging of apoptotic processes and targeted anti-inflammation study

This work reports novel chitosan functionalized graphene oxide (GO) nanocomposites combined fluorescence imaging and therapeutic functions in one agent, which can serve as a promising alternative to alleviate related diseases caused hyperinflammation. Briefly, GO was designed to be conjugated with chitosan, fluorescein-labeled peptide, toll-like receptor 4 antibody and hydroxycamptothecin/aloe emodin. We have demonstrated that such nanocomposites could effectively achieve active targeted delivery of pro-apoptotic and anti-inflammatory drugs into inflammatory cells and cause cells apoptosis by acid-responsive drug release. Moreover, confocal fluorescence imaging confirms that the drug-induced inflammatory cells apoptosis could be visualized the light-up fluorescence of fluorescein activated by caspase-3. Meanwhile, inflammatory-related biomarkers have down-regulated after the nanocomposites' treatment in both vitro and vivo experiments consistent with the results in histological sections. In summary, the bifunctional nanocomposites that possess anti-inflammation and fluorescence imaging could serve as a promising therapeutic agent for reducing hyperinflammation caused by numerous diseases.

Reduced Graphene Oxide Fibers for Guidance Growth of Trigeminal Sensory Neurons

Neurite alignment and elongation play special roles in the treatment of neuron disease, design of tissue engineering implants, and bioelectrodes applications. For instance, the trigeminal neurons (TGNs) free nerve endings are a key component of the pulp-dentin complex. The reinnervation of the pulp canal space requires the recruitment of apically positioned free nerve endings through axonal guidance. Many studies have been carried to develop patterned two-dimensional substrates or three-dimensional scaffolds with aligned topographical structures to guide axonal growth. However, most of the strategies are either complicated/inconvenient in process or time-/cost-sacrifice. One-step dimensionally confined hydrothermal (DCH) technique has been considered an effective and facile approach to fabricate reduced graphene oxide fibers (rGOFs), and the rGOFs have shown significant potential in regulating neural stem cells differentiation toward neurons. Here, inspired by the relationship between the lateral size of GO nanosheets and the electrical conductivity of GO films made from GO sheets as a building block, we fabricated surface conductivity and topography-controlled rGOFs based on the DCH method. Well "self-patterned" directional channel structure of rGOF showed outstanding ability to improve the neurofilament alignment and migration, with the cell deviation angle less than 10° for over 90% of the cells, while a porous surface structure tended to form neuron nets. All of the rGOF possessed excellent cytocompatibility with TGNs. Our results underlined the high degree of alignment of topographical cues in guidance of neurite over high electrical conductivity. The as-prepared rGOFs could be used in many areas including biosensing, electrochemistry, energy, and peripheral or central nerve tissue engineering.

Graphene Oxide: Opportunities and Challenges in Biomedicine

Desirable carbon allotropes such as graphene oxide (GO) have entered the field with several biomedical applications, owing to their exceptional physicochemical and biological features, including extreme strength, found to be 200 times stronger than steel; remarkable light weight; large surface-to-volume ratio; chemical stability; unparalleled thermal and electrical conductivity; and enhanced cell adhesion, proliferation, and differentiation properties. The presence of functional groups on graphene oxide (GO) enhances further interactions with other molecules. Therefore, recent studies have focused on GO-based materials (GOBMs) rather than graphene. The aim of this research was to highlight the physicochemical and biological properties of GOBMs, especially their significance to biomedical applications. The latest studies of GOBMs in biomedical applications are critically reviewed, and in vitro and preclinical studies are assessed. Furthermore, the challenges likely to be faced and prospective future potential are addressed. GOBMs, a high potential emerging material, will dominate the materials of choice in the repair and development of human organs and medical devices. There is already great interest among academics as well as in pharmaceutical and biomedical industries.

Lanthanum ions decorated 2-dimensional g-C3N4 for ciprofloxacin photodegradation

The low band gap energy and high surface area two-dimensional materials allow it to tune its basic properties using surface decoration. Here, La³⁺ are decorated on two-dimensional graphitic carbon nitride using a simple and easily scalable chemisorption process with an adsorption capacity of 657.32 mg g^-1. In the X-ray diffraction (XRD) study, the positive slope of the W-H plot elucidates the tensile strain generation (0.103) in La³⁺ ions decorated 2D-g-C₃N₄ (La³⁺-2D-g-C₃N₄). The high-resolution transmission electron microscope (HR-TEM) study and the higher I_D/I_G ratio (0.82) in the Raman spectroscopy study confirm the more defects intensification in La³⁺-2D-g-C₃N₄. The reduction in band gap energy for La³⁺-2D-g-C₃N₄ (from 2.83 eV to 2.21 eV) has shown a good correspondence with the band structures study as obtained from the DFT study. In the DFT study, the significant contributions of N atoms in charge transfer validate the N 1s findings from the X-ray photoelectron spectroscopy (XPS) study for La³⁺-2D-g-C₃N₄. La³⁺-2D-g-C₃N₄ shows the photodegradation efficiency (93%) of ciprofloxacin under UV irradiation, which is superior to pristine 2D-g-C₃N₄ (82%) as well as other g-C₃N₄ based nanocatalysts. Also, La³⁺ decoration results in enhancement (32.3%) in photodegradation kinetics rate. The degradation and kinetics studies in the presence of different scavengers ensure that the O₂- and OH^- radicals are mostly responsible for the ciprofloxacin photodegradation. The Liquid chromatographic-mass spectroscopy and the high-performance liquid chromatography studies confirm the photodegradation. The reusability of La³⁺-2D-g-C₃N₄ is tested up to the fifth cycle. FTIR and UV-visible absorption spectroscopy confirm the stability of the used photocatalyst.

Biomimetic 3D bacterial cellulose-graphene foam hybrid scaffold regulates neural stem cell proliferation and differentiation

Neural stem cell (NSC)-based therapy is a promising candidate for treating neurodegenerative diseases and the preclinical researches call an urgent need for regulating the growth and differentiation of such cells. The recognition that three-dimensional culture has the potential to be a biologically significant system has stimulated an extraordinary impetus for scientific researches in tissue engineering and regenerative medicine. Here, A novel scaffold for culturing NSCs, three-dimensional bacterial cellulose-graphene foam (3D-BC/G), which was prepared via in situ bacterial cellulose interfacial polymerization on the skeleton surface of porous graphene foam has been reported. 3D-BC/G not only supports NSC growth and adhesion, but also maintains NSC stemness and enhances their proliferative capacity. Further phenotypic analysis indicated that 3D-BC/G induces NSCs to selectively differentiate into neurons, forming a neural network in a short amount of time. The scaffold has good biocompatibility with primary cortical neurons enhancing the neuronal network activities. To explore the underlying mechanisms, RNA-Seq analysis to identify genes and signaling pathways was performed and it suggests that 3D-BC/G offers a more promising three-dimensional conductive substrate for NSC research and neural tissue engineering, and the repertoire of gene expression serves as a basis for further studies to better understand NSC biology.

Electrospun Nanofibers of Natural and Synthetic Polymers as Artificial Extracellular Matrix for Tissue Engineering

Many types of polymer nanofibers have been introduced as artificial extracellular matrices. Their controllable properties, such as wettability, surface charge, transparency, elasticity, porosity and surface to volume proportion, have attracted much attention. Moreover, functionalizing polymers with other bioactive components could enable the engineering of microenvironments to host cells for regenerative medical applications. In the current brief review, we focus on the most recently cited electrospun nanofibrous polymeric scaffolds and divide them into five main categories: natural polymer-natural polymer composite, natural polymer-synthetic polymer composite, synthetic polymer-synthetic polymer composite, crosslinked polymers and reinforced polymers with inorganic materials. Then, we focus on their physiochemical, biological and mechanical features and discussed the capability and efficiency of the nanofibrous scaffolds to function as the extracellular matrix to support cellular function.

Recent advances in bioelectronics chemistry

Research in bioelectronics is highly interdisciplinary, with many new developments being based on techniques from across the physical and life sciences. Advances in our understanding of the fundamental chemistry underlying the materials used in bioelectronic applications have been a crucial component of many recent discoveries. In this review, we highlight ways in which a chemistry-oriented perspective may facilitate novel and deep insights into both the fundamental scientific understanding and the design of materials, which can in turn tune the functionality and biocompatibility of bioelectronic devices. We provide an in-depth examination of several developments in the field, organized by the chemical properties of the materials. We conclude by surveying how some of the latest major topics of chemical research may be further integrated with bioelectronics.

Enhanced Photocatalytic Activity of BiVO4/Bi2S3/SnS2 Heterojunction under Visible Light

Heterojunction photocatalysts have attracted a significant amount of attention due to their advantages over a single photocatalyst and, particularly, their superior spatial charge separation. Herein, the BiVO4/Bi2S3/SnS2 heterojunction was synthesized via solvothermal synthesis with different ratios of BiVO4 to SnS2. The photodegradation rate of the 0.03 BiVO4/SnS2 sample for rhodamine B removal is 2.3 times or 2.9 times greater than that of a single SnS2 or BiVO4, respectively. The chemical bond between photocatalysts is confirmed by X-ray photoelectron spectroscopy (XPS), and the synchronized shift observed in binding energies strongly indicates the electron screening effect at the heterojunction. A Z-scheme model is proposed to explain charge transfer pathway in the system, in which the formation of Bi2S3 plays a crucial role in the enhanced photocatalytic performance of the heterojunction.

Co-Immobilization of Ce6 Sono/Photosensitizer and Protonated Graphitic Carbon Nitride on PCL/Gelation Fibrous Scaffolds for Combined Sono-Photodynamic Cancer Therapy

Aiming at developing a moderate and efficient sono-photodynamic therapy for breast cancer, tissue engineering scaffolds may provide an easy and efficient strategy to eliminate serious side effects in conventional surgery or chemotherapy, and thus, they are highly desired. However, the development of ideal sono-photodynamic therapeutic scaffolds is always hindered by the poor stability and incompatibility between the different biomaterial components. Herein, the Food and Drug Administration (FDA)-approved sono/photosensitizer Chlorin e6 (Ce6) was successfully and tightly incorporated into electrospun polycaprolactone/gelatin (PG) scaffolds via positively charged protonated g-C₃N₄ nanosheets (pCN). The PG fibers were precoated with graphene oxide (GO) to enable the assembly of pCN on the surface through electrostatic interactions. The Ce6@pCN-GO-PG composite scaffolds exhibited good cytocompatibility and excellent sono-photodynamic activity, leading to distinctly boosted reactive oxygen species (ROS) generation and a 95.8% inactivation rate of breast cancer cells through a synergistic sono-photodynamic process triggered by an 808 nm laser and 1 MHz ultrasound (US) excitation, within the clinical therapeutic dose. The as-developed scaffolds with unique ultrasound cavitation therapeutic effects can be used not only for complete eradication of tumor cells after surgery but also as a cell behavior observation platform of sono-photodynamic cancer therapy.

Light-Responsive Inorganic Biomaterials for Biomedical Applications

Light-responsive inorganic biomaterials are an emerging class of materials used for developing noninvasive, noncontact, precise, and controllable medical devices in a wide range of biomedical applications, including photothermal therapy, photodynamic therapy, drug delivery, and regenerative medicine. Herein, a range of biomaterials is discussed, including carbon-based nanomaterials, gold nanoparticles, graphite carbon nitride, transition metal dichalcogenides, and up-conversion nanoparticles that are used in the design of light-responsive medical devices. The importance of these light-responsive biomaterials is explored to design light-guided nanovehicle, modulate cellular behavior, as well as regulate extracellular microenvironments. Additionally, future perspectives on the clinical use of light-responsive biomaterials are highlighted.

Photothermally Activated Electrospun Nanofiber Mats for High-Efficiency Surface-Mediated Gene Transfection

Although electrospun nanofibers have been used to deliver functional genes into cells attached to the surface of the nanofibers, the controllable release of genes from nanofibers and the subsequent gene transfection with high efficiency remain challenging. Herein, photothermally activated electrospun hybrid nanofibers are developed for high-efficiency surface-mediated gene transfection. Nanofibers with a core-sheath structure are fabricated using coaxial electrospinning. Plasmid DNA (pDNA) encoding basic fibroblast growth factor is encapsulated in the fiber core, and gold nanorods with photothermal properties are embedded in the fiber sheath composed of poly(l-lactic acid) and gelatin. The nanofiber mats show excellent and controllable photothermal response under near-infrared irradiation. The permeability of the nanofibers is thereby enhanced to allow the rapid release of pDNA. In addition, transient holes are formed in the membranes of NIH-3T3 fibroblasts attached to the mat, thus facilitating delivery and transfection with pDNA and leading to increased proliferation and migration of the transfected cells in vitro. This work offers a facile and reliable method for the regulation of cell function and cell behavior via localized gene transfection, showing great potential for application in tissue engineering and cell-based therapy.

Spontaneously Micropatterned Silk/Gelatin Scaffolds with Topographical, Biological, and Electrical Stimuli for Neuronal Regulation

Effective integration of stimulation and direction in bionic scaffolds by materials and microstructure design has been the focus in the advancement of nerve regeneration. Hydrogels are the most promising biomimicked materials used in developing nerve grafts, but the highly hydrated networks limit the fabrication of hydrogel materials into complex biomedical devices. Herein, facile lithography-free and spontaneously micropatterned techniques were used to fabricate a smart protein hydrogel-based scaffold, which carried topographical, electrical, and chemical induction for neural regulation. The synthesized tissue-mimicked silk-gelatin (SG)/polylactic acid bilayer system can self-form three-dimensional ordered corrugation micropatterns with well-defined dimensions (wavelength, λ) based on the stress-induced topography. Through magnetically and topographically guided deposition of the synthesized nerve growth factor-incorporated Fe₃O₄-graphene nanoparticles (GFPNs), a biologically and electrically conductive cell passage with one-dimensional directionality was constructed to allow for a controllable constrained geometric effect on neuronal adhesion, differentiation, and neurite orientation. Particularly, the SG with corrugation patterns of λ ≈ 30 μm resulted in the optimal cell adhesion and differentiation in response to the pattern guidance. Furthermore, the additional electrical stimulation applied on GFPN-deposited SG resulted in a 1.5-fold increase in the neurite elongation by day 7, finally leading to the neuronal connection by day 21. Such a hydrogel device with synergistic effects of physical and chemical enhancement on neuronal activity provides an expectable opportunity in the development of next-generation nerve conduits.

Size-Dependent in Vitro Biocompatibility and Uptake Process of Polymeric Carbon Nitride

Polymeric carbon nitride (PCN), which demonstrates unique properties, has been widely explored, mostly in photocatalysis; however, the evaluation of its biocompatibility is still needed. Herein, the cytocompatibility of PCN with different lateral size distributions (A-PCN with 160 nm, B-PCN with 20 nm, and C-PCN with 10 nm dominating lateral sizes) was investigated. The viability of three cell lines (L929, MCF-7, and HepG2) has been determined using cell counting kit-8 (CCK-8), neutral red uptake (NRU), and lactate dehydrogenase (LDH) leakage assays. It was found that the highest cytotoxicity of PCN was observed for flakes with a lateral size of ∼20 nm (B-PCN) in three cell lines after 48 h of exposition. The uptake process of B-PCN sheets labeled with fluorescein isothiocyanate (FITC) by cells was also the most effective. Confocal laser scanning microscopy and atomic force microscopy revealed the nanomaterial distribution throughout the cytoplasm and perinuclear region. The results demonstrated the correlation among size, internalization process, and cytocompatibility of the tested polymeric carbon nitride structures.

Highly sensitive detection of microcystin-LR under visible light using a self-powered photoelectrochemical aptasensor based on a CoO/Au/g-C3N4 Z-scheme heterojunction

Based on the unique photoelectrochemical properties of a CoO/Au/g-C₃N₄ Z-scheme heterojunction, a self-powered photoelectrochemical (PEC) aptasensor was constructed for the detection of microcystin-leucine arginine (MC-LR). Z-scheme heterojunctions can promote the separation of a photo-induced electron-hole pair, and the surface plasmonic resonance (SPR) of Au nanoparticles can significantly enhance the adsorption of visible light. Importantly, MC-LR molecules were captured by aptamers initially immobilized on the modified electrode due to their high affinity, and then oxidized by the photogenerated holes, which caused an amplified photocurrent signal, allowing the quantitative analysis of MC-LR by measuring the photocurrent intensity change. This PEC MC-LR aptasensor showed high sensitivity and selectivity within a wide linear response range from 0.1 pM to 10 nM and a detection limit of 0.01 pM. The application of this sensor in the analysis of lake water samples provided accurate results with a relative standard deviation (RSD) of 2.6%-4.2%.

Flow induced HeLa cell detachment kinetics show that oxygen-containing functional groups in graphene oxide are potent cell adhesion enhancers

A broader and quantitative understanding of cell adhesion to two-dimensional carbon-based materials is needed to expand the applications of graphene and graphene oxide (GO) in tissue engineering, prosthetics, biosensing, detection of circulating cancer cells, and (photo)thermal therapy. We therefore studied the detachment kinetics of human cancer cells HeLa adhered on graphene, GO, and glass substrates using stagnation point flow on an impinging jet apparatus. HeLa cells detached easily from graphene at a force of 9.4 nN but adhered very strongly to GO. The presence of hydrophilic functional groups thus apparently enhanced the HeLa cells' adherence to the GO surface. On graphene, smaller HeLa cells adhered more strongly and detached later than cells with larger projected areas, but the opposite behavior was observed on GO. These findings reveal GO to be a suitable platform for detecting cells or establishing contacts, e.g. between graphene-based circuits/electrodes and tissues. Our experiments also show that the impinging jet method is a powerful tool for studying cellular detachment mechanisms and adhesion strength, and could therefore be very useful for investigating interactions between cells and graphene-based materials.

Transdermal Delivery of 5-Aminolevulinic Acid by Nanoethosome Gels for Photodynamic Therapy of Hypertrophic Scars

5-Aminolevulinic acid (ALA)-loaded nanoethosome (ALA-ES) gels are successfully prepared to realize a transdermal delivery of ALA, and they provide a feasible approach for the photodynamic therapy (PDT) of hypertrophic scars (HS). Herein, the morphological and physicochemical features indicate that ALA-ES is stable in gel matrix. In vitro transdermal penetration studies suggest ALA-ES gels can overcome the compact dermal barrier and deliver more ALA into human HS tissue. In vivo delivery studies further reveal that ALA-ES gels can penetrate into rabbit HS tissue to facilitate ALA accumulating in hypertrophic scar fibroblast (HSF) and converting into protoporphyrin IX in the cytoplasm. Utilizing transmission electron microscopy, the visual in vivo penetration process indicates ALA-ES penetrate into HS tissue utilizing its deformable membrane, enters HSF by a pinocytotic-like mechanism, and then releases ALA in the cytoplasm. Subsequently, PDT efficacy is assessed using rabbit HS models. The morphological and histological analysis reveal that ALA-ES gels can improve HS by promoting HSF apoptosis, remodelling collagen fibers and increasing MMP3 expression. The results demonstrate that ALA-ES gels are suitable in clinical treatment of HS and make a substantial progress within the field.

Enhanced Photoresponsive Graphene Oxide-Modified g-C3N4 for Disassembly of Amyloid β Fibrils

Protein misfolding and abnormal self-assembly lead to the aggregates of oligomers, fibrils, or senior amyloid β (Aβ) plaques, which are associated with the pathogenesis of many neurodegenerative diseases. Progressive cerebral accumulation of Aβ protein was widely proposed to explain the cause of Alzheimer's disease, for which one promising direction of the preclinical study is to convert the preformed β-sheet structure of Aβ aggregates into innocent structures. However, the conversion is even harder than the modulation of the amyloidosis process. Herein, a graphene oxide/carbon nitride composite was developed as a good photocatalyst for irreversibly disassembling the Aβ aggregates of Aβ(33-42) under UV. Quartz crystal microbalance, circular dichroism spectrum, atomic force microscopy, fluorescent spectra, and mechanical property analysis were performed to analyze this photodegradation process from different aspects for fully understanding the mechanism, which may provide an important enlightenment for the relevant research in this field and neurodegenerative disease study.

Electroactive Scaffolds for Neurogenesis and Myogenesis: Graphene-Based Nanomaterials

One of the major issues in tissue engineering is constructing a functional scaffold to support cell growth and also provide proper synergistic guidance cues. Graphene-based nanomaterials have emerged as biocompatible and electroactive scaffolds for neurogenesis and myogenesis, due to their excellent tunable chemical, physical, and mechanical properties. This review first assesses the recent investigations focusing on the fabrication and applications of graphene-based nanomaterials for neurogenesis and myogenesis, in the form of either 2D films, 3D scaffolds, or composite architectures. Besides, because of their outstanding electrical properties, graphene family materials are particularly suitable for designing electroactive scaffolds that could provide proper electrical stimulation (i.e., electrical or photo stimuli) to promote the regeneration of excitable neurons and muscle cells. Therefore, the effects and mechanism of electrical and/or photo stimulations on neurogenesis and myogenesis are followed. Furthermore, studies on their biocompatibilities and toxicities especially to neural and muscle cells are evaluated. Finally, the future challenges and perspectives in facilitating the development of clinical translation of graphene-family nanomaterials in treating neurodegenerative and muscle diseases are discussed.

Graphene Oxide-Assisted Accumulation and Layer-by-Layer Assembly of Antibacterial Peptide for Sustained Release Applications

Fabrication of antibacterial materials with sustained release of active components is of great importance for long-term antibacterial applications. Graphene oxide (GO) has been found to be an excellent carrier for accumulating the antibacterial peptide of G(IIKK)₄I-NH₂ and mediating its loading into the layer-by-layer (LBL) films for sustained release applications. G(IIKK)₄I-NH₂ takes random coiled conformation in monomeric state below 0.17 mM but self-assembles into supramolecular aggregates with α-helical secondary structure at higher concentrations. It can bind onto GO surface in both monomeric and aggregate states to form stable GO@G(IIKK)₄I-NH₂ composites. Upon binding, the local amphiphilic environment of GO surface induces a conformational transition of G(IIKK)₄I-NH₂ monomers from random coils to α-helix. The aggregate binding enhances the loading amount greatly. GO (1 mg) can load as high as 1.7 mg of peptide at saturation. This enables the GO@G(IIKK)₄I-NH₂ composites to serve as reservoirs for sustained release of active G(IIKK)₄I-NH₂ monomers. Moreover, G(IIKK)₄I-NH₂ itself shows low efficiency in LBL assembly, whereas the GO@G(IIKK)₄I-NH₂ composites are ideal LBL assembling units with highly enhanced loading efficiency of G(IIKK)₄I-NH₂. The LBL films involving degradable poly(β-amino esters) can realize sustained release of G(IIKK)₄I-NH₂ for bacteria killing in a well-controlled manner. This study demonstrates an efficient strategy for fabrication of long-durable antibacterial materials and surface coatings by using GO as the carrier for drug accumulation and loading.

Moderate Bacterial Etching Allows Scalable and Clean Delamination of g-C3N4 with Enriched Unpaired Electrons for Highly Improved Photocatalytic Water Disinfection

Delamination treatment is crucial in promoting the activity of bulk graphitic carbon nitride (g-C₃N₄). However, most of the currently used methods of exfoliating bulk g-C₃N₄ to achieve g-C₃N₄ thin layers suffer from low yield and environmental pollution. Herein, we developed a facile bacterial etching approach for the preparation of high-quality g-C₃N₄ nanosheets by exfoliating bulk g-C₃N₄ under room temperature. Morphology and physicochemical characterizations show that the bacteria-treated g-C₃N₄ (BT-CN) samples, especially BT-CN-2d, have a lamina-like two-dimensional (2D) in-plane porous structure, a significantly enlarged specific surface area (82.61 m² g^-1), and a remarkable narrow band gap (2.11 eV). X-ray photoelectron spectroscopy and electron paramagnetic resonance spectra confirm the dramatic enrichment of unpaired electron in the BT-CN-2d g-C₃N₄ nanosheets. EIS spectra and photocurrent tests indicate the fast electron transportation. As a result, the representative BT-CN-2d g-C₃N₄ photocatalyst shows an optimal visible light-driven photocatalytic performance in water disinfection (fourfold higher than bulk g-C₃N₄), as well as good cycle stability. This moderate and clean bacterial etching process can be realized in tens of gram scale in the laboratory and should be readily extended to kilogram scale. The present work provides fundamental knowledge about the scalable production of high-quality g-C₃N₄ by bioengineering method, offering extendable availability for designing and fabricating other functional 2D materials.

Development of Self-Assembled Nanoribbon Bound Peptide-Polyaniline Composite Scaffolds and Their Interactions with Neural Cortical Cells

Degenerative neurological disorders and traumatic brain injuries cause significant damage to quality of life and often impact survival. As a result, novel treatments are necessary that can allow for the regeneration of neural tissue. In this work, a new biomimetic scaffold was designed with potential for applications in neural tissue regeneration. To develop the scaffold, we first prepared a new bolaamphiphile that was capable of undergoing self-assembly into nanoribbons at pH 7. Those nanoribbons were then utilized as templates for conjugation with specific proteins known to play a critical role in neural tissue growth. The template (Ile-TMG-Ile) was prepared by conjugating tetramethyleneglutaric acid with isoleucine and the ability of the bolaamphiphile to self-assemble was probed at a pH range of 4 through 9. The nanoribbons formed under neutral conditions were then functionalized step-wise with the basement membrane protein laminin, the neurotropic factor artemin and Type IV collagen. The conductive polymer polyaniline (PANI) was then incorporated through electrostatic and π–π stacking interactions to the scaffold to impart electrical properties. Distinct morphology changes were observed upon conjugation with each layer, which was also accompanied by an increase in Young’s Modulus as well as surface roughness. The Young’s Modulus of the dried PANI-bound biocomposite scaffolds was found to be 5.5 GPa, indicating the mechanical strength of the scaffold. Thermal phase changes studied indicated broad endothermic peaks upon incorporation of the proteins which were diminished upon binding with PANI. The scaffolds also exhibited in vitro biodegradable behavior over a period of three weeks. Furthermore, we observed cell proliferation and short neurite outgrowths in the presence of rat neural cortical cells, confirming that the scaffolds may be applicable in neural tissue regeneration. The electrochemical properties of the scaffolds were also studied by generating I-V curves by conducting cyclic voltammetry. Thus, we have developed a new biomimetic composite scaffold that may have potential applications in neural tissue regeneration.