Microplasma Bubbles: Reactive Vehicles for Biofilm Dispersal

Micro and nanobubbles-assisted advanced oxidation processes for water decontamination: The importance of interface reactions

Micro and nanobubbles (MNBs), as an efficient and convenient method, have been widely used in water treatment. Composed of gas and water, MNBs avoid directly introducing potential secondary pollutants. Notably, MNBs exhibit significant advantages through interface reactions in assisting AOPs. They overcome barriers like low mass transfer coefficients and limited reactive sites, and shorten the distance between pollutants and oxidants, achieving higher pollutant removal efficiency. However, there is a lack of systematic summary and in-depth discussion on the fundamental mechanisms of MNBs-assisted AOPs. In this critical review, the characteristics of MNBs related to water treatment are outlined first. Subsequently, the recent applications, performance, and mechanisms of MNBs-assisted AOPs including ozone, plasma, photocatalytic, and Fenton oxidation are overviewed. We conclude that MNBs can improve pollutant removal mainly by enhancing the utilization of reactive oxygen species (ROS) generated by AOPs due to the effective interface reactions. Furthermore, we calculated the electrical energy per order of reaction (EE/O) parameter of different MNBs-assisted AOPs, suggesting that MNBs can reduce the total energy consumption in most of the tested cases. Finally, future research needs/opportunities are proposed. The fundamental insights in this review are anticipated to further facilitate an in-depth understanding of the mechanisms of MNBs-assisted AOPs and supply critical guidance on developing MNBs-based technologies for water treatment.

Exploring the Synergistic Mechanisms of Nanopulsed Plasma Bubbles and Photocatalysts for Trimethoprim Degradation and Mineralization in Water

In this study, the synergetic action of nanopulsed plasma bubbles (PBs) and photocatalysts for the degradation/mineralization of trimethoprim (TMP) in water was investigated. The effects of ZnO or TiO2 loading, plasma gas, and initial TMP concentration were evaluated. The physicochemical characterization of plasma-treated water, the quantification of plasma species, and the use of appropriate plasma species scavengers shed light on the plasma-catalytic mechanism. ZnO proved to be a superior catalyst compared to TiO2 when combined with plasma bubbles, mainly due to the increased production of ⋅OH and oxygen species resulting from the decomposition of O3. The air-PBs + ZnO system resulted in higher TMP degradation (i.e., 95% after 5 min of treatment) compared to the air-PBs + TiO2 system (i.e., 87%) and the PBs-alone process (83%). The plasma gas strongly influenced the process, with O2 resulting in the best performance and Ar being insufficient to drive the process. The synergy between air-PBs and ZnO was more profound (SF = 1.7), while ZnO also promoted the already high O2-plasma bubbles' performance, resulting in a high TOC removal rate (i.e., 71%). The electrical energy per order in the PBs + ZnO system was very low, ranging from 0.23 to 0.46 kWh/m3, depending on the plasma gas and initial TMP concentration. The study provides valuable insights into the rapid and cost-effective degradation of emerging contaminants like TMP and the plasma-catalytic mechanism of antibiotics.

How to Survive at Point Nemo? Fischer-Tropsch, Artificial Photosynthesis, and Plasma Catalysis for Sustainable Energy at Isolated Habitats

Inhospitable, inaccessible, and extremely remote alike the famed pole of inaccessibility, aka Point Nemo, the isolated locations in deserts, at sea, or in outer space are difficult for humans to settle, let alone to thrive in. Yet, they present a unique set of opportunities for science, economy, and geopolitics that are difficult to ignore. One of the critical challenges for settlers is the stable supply of energy both to sustain a reasonable quality of life, as well as to take advantage of the local opportunities presented by the remote environment, e.g., abundance of a particular resource. The possible solutions to this challenge are heavily constrained by the difficulty and prohibitive cost of transportation to and from such a habitat (e.g., a lunar or Martian base). In this essay, the advantages and possible challenges of integrating Fischer-Tropsch, artificial photosynthesis, and plasma catalysis into a robust, scalable, and efficient self-contained system for energy harvesting, storage, and utilization are explored.

Underwater bubbling plasma assisted with persulfate activation for the synergistic degradation of tetracycline hydrochloride

The performance and mechanism of persulfate consisting of peroxymonosulfate (PMS) and peroxydisulfate (PDS) activation by underwater bubbling plasma (UBP) for the synergistic removal of tetracycline hydrochloride (TCH) were comparatively investigated. Both PMS and PDS addition significantly promoted the removal of TCH in UBP system, indicating persulfate exhibited highly synergistic effect with UBP. Furthermore, enhancing the persulfate dosage, peak voltage and pulse frequency, as well as reducing initial TCH concentration were favorable for the elimination of TCH. Compared with neutral condition, acidic and alkaline condition were advantageous to TCH removal. The presence of coexisting substances including Cl-, SO42- and humic acid (HA) had an adverse effect on TCH degradation, while Fe2+ could improve the removal of TCH. The degradation of ciprofloxacin and metronidazole proved the applicability for other antibiotics degradation of the reaction system. SO4-·, ·OH, ·O2-, hydrated electrons, O3 and H2O2 were the active substances responsible for TCH removal. The reduction of aqueous O3 concentration and enhancement of H2O2 concentration were observed after persulfate addition. UV-vis spectra and TOC analysis illustrated the addition of PMS or PDS facilitated the degradation and mineralization of TCH. 3D-EEMF spectra visually displayed the degradation process of TCH. Plausible degradation routes were deduced based on LC-MS and the toxicities of TCH and its intermediates were evaluated by Toxicity Estimation Software Tool.

Efficient degradation of the refractory organic pollutant by underwater bubbling pulsed discharge plasma: performance, degradation pathway, and toxicity prediction

It is essential to develop an efficient technology for the elimination of refractory contaminants due to their high toxicity. In this study, a novel underwater bubbling pulsed discharge plasma (UBPDP) system was proposed for the degradation of Orange II (OII). The degradation performance experiments showed that by enhancing the peak voltage and pulse frequency, the degradation efficiency of OII increased gradually. The removal efficiencies under different air flow rates were close. Reducing OII concentration and solution conductivity could promote the elimination of OII. Compared with neutral and alkaline conditions, acidic condition was more beneficial to OII degradation. The active species including ·OH, ·O2-, 1O2, and hydrated electrons were all involved in OII degradation. The concentrations of O3 and H2O2 in OII solution were lower than those in deionized water. During discharge, the solution pH increased while conductivity decreased. The variation of UV-vis spectra with treatment time indicated the effective decomposition of OII. Possible degradation pathways were speculated based on LC-MS. The toxicity of intermediate products was predicted by the Toxicity Estimation Software Tool. Coexisting constituents including Cl-, SO42-, HCO3-, and humic acid had a negative effect on OII removal. Finally, the comparison with other technology depicted the advantage of the UBPDP system.

High Performance Epoxy Composites Containing Nanofiller Modified by Plasma Bubbles

The thermal conductivity of polymer materials is a fundamental parameter in the field of high-voltage electrical insulation. When the operating frequency and power for electrical equipment or electronic devices increase significantly, the internal heat will increase dramatically, and the accumulation of heat will further lead to insulation failure and serious damage of the whole system. The addition of filler with high thermal conductivity into polymer is a common solution. However, the interfacial thermal resistance between filler and bulk materials is the major obstacle to improve thermal conductivity. Herein, in order to reduce the interfacial thermal resistance, nanofillers are modified by plasma technology. The surface modification of nano-Al₂O₃ is carried out using plasma bubbles with three atmospheres (Ar, Ar+O₂, air) as well as coupling agent. The situation of surface grafting before and after the modification is characterized using FTIR, XPS, and SEM. The effect of the mechanism of modification on the thermal conductivity and reaction pathway is investigated. The results showed that the thermal conductivity after plasma modification is increased significantly. Especially, the thermal conductivity is increased by 35% for the sample modified by Ar+O₂ atmosphere. This results because more hydroxyl is introduced on the filler surface by the plasma bubbles, which enhance the interface compatibility between filler and epoxy. In addition, surface insulation performance for the modified samples also is enhanced by 14%. This is associated with the change of surface resistance and trap distribution. These results provide potential support for the development of fabrication for high performance epoxy composites.

Cauterization of Narrow Root Canals Untouched by Instruments by High-Frequency Current

The mechanical removal of bacteria is fundamental to the treatment of infected root canals, but complete sterilization of biofilms tends not to extend to uninstrumented areas. However, during electrical conduction to a root canal filled with a conductor, the higher impedance where the root canal is narrower generates Joule heat that may result in a large temperature increase and sterilization. The effect of a high-frequency electric current on the wall of a simulated narrow root canal was investigated by scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS). Simulated root canals, 0.1 mm in diameter, were prepared in dentine blocks. The root canal wall was treated with Plank-Rychlo solution for 5 min to create a decalcified layer. The simulated root canal was filled with either saline or NaClO, and 150 or 225 V at 520 kHz was applied for 0 s, 1 s, or 5 s. As the conduction time increased, and when the saline was replaced with NaClO, the proportion with a flat decalcified surface decreased, dentinal tubules and a lava-like morphology were significantly more evident on SEM (p < 0.01), and EDS showed significant decreases in carbon and oxygen and increases in calcium (p < 0.01). It was concluded that filling uninstrumented root canals with NaClO and using electrical conduction for 5 s could incinerate and eliminate the organic material of the root canal wall. The application of high-frequency electric current may lead to the cure of many cases of persistent apical periodontitis.

Plasma-activated liquids for mitigating biofilms on food and food contact surfaces

Plasma-activated liquids (PALs) are emerging and promising alternatives to traditional decontamination technologies and have evolved as a new technology for applications in food, agriculture, and medicine. Contamination caused by foodborne pathogens and their biofilms has posed challenges and concerns to the food industry in terms of safety and quality. The nature of the food and the food processing environment are major factors that contribute to the growth of various microorganisms, followed by the biofilm characteristics that ensure their survival in severe environmental conditions and against traditional chemical disinfectants. PALs show an efficient impact against microorganisms and their biofilms, with various reactive species (short- and long-lived ones), physiochemical properties, and plasma processing factors playing a crucial role in mitigating biofilms. Moreover, there is potential to improve and optimize disinfection strategies using a combination of PALs with other technologies for the inactivation of biofilms. The overarching aim of this study is to build a better understanding of the parameters that govern the liquid chemistry generated in a liquid exposed to plasma and how these translate into biological effects on biofilms. This review provides a current understanding of PALs-mediated mechanisms of action on biofilms; however, the precise inactivation mechanism is still not clear and is an important part of the research. Implementation of PALs in the food industry could help overcome the disinfection hurdles and can enhance biofilm inactivation efficacy. Future perspectives in this field to expand existing state of the art to seek breakthroughs for scale-up and implementation of PALs technology in the food industry are also discussed.

Plasma for aquaponics

Global environmental, social, and economic challenges call for innovative solutions to food production. Current food production systems require advances beyond traditional paradigms, acknowledging the complexity arising from sustainability and a present lack of awareness about technologies that may help limit, for example, loss of nutrients from soil. Aquaponics, a closed-loop system that combines aquaculture with hydroponics, is a step towards the more efficient management of scarce water, land, and nutrient resources. However, its large-scale use is currently limited by several significant challenges of maintaining desirable water chemistry and pH, managing infections in fish and plants, and increasing productivity efficiently, economically, and sustainably. This paper investigates the opportunities presented by plasma technologies in meeting these challenges, potentially opening new pathways for sustainability in food production.

Effects of non-thermal atmospheric plasma on protein

Currently, the advancement in non-thermal atmospheric plasma technology enables plasma treatments on some heat-sensitive targets, including biological substances, without unspecific damage caused by thermal effect. The significant effects of non-thermal atmospheric plasma modulating biological events have been demonstrated by considerable studies. Protein, one of the most important biomolecules, participates in the majority of the life-sustaining activities in all organisms, whose functions are derived from the diverse biochemical properties of amino acid compositions and four-tiered protein structure hierarchy. Therefore, the knowledge of how non-thermal atmospheric plasma affects protein greatly benefits the understanding and application of the non-thermal atmospheric plasma's effect in biological area. In this review, we summarize recent research progress on the effects of non-thermal atmospheric plasma, particularly its reactive species, on biochemical and biophysical characteristics of proteins at different structural levels that leads to their functional changes. Moreover, the physiological effects of non-thermal atmospheric plasma at cellular or organism level driven by the manipulations on protein and their relative application prospects are reviewed. Despite the exceptional application potential, the exploration of the non-thermal atmospheric plasma's effect on protein still confronts with difficulties due to the limited knowledge of the underlying mechanisms and the complexity of non-thermal atmospheric plasma operation systems, which requires further studies and standardization of non-thermal atmospheric plasma treatments.

Human Trial for the Effect of Plasma-Activated Water Spray on Vaginal Cleaning in Patients with Bacterial Vaginosis

Underwater plasma discharge temporally produces several reactive radicals and/or free chlorine molecules in water, which is responsible for antimicrobial activity. Hence, it can simply sanitize tap water without disinfectant treatment. Additionally, the spraying technique using cleaning water exploits deep application in the narrow and curved vaginal tract of patients. Herein, we attempted a clinical trial to evaluate the vaginal cleaning effect of spraying plasma-activated water (PAW) to patients with vaginitis (46 patients). The efficacy was compared with treatment with betadine antiseptics used to treat bacterial vaginosis (40 patients). To evaluate the cleaning effect, Gram staining of the vaginal secretions was conducted before and after spraying PAW or betadine treatment (BT). Consequently, PAW-sprayed (PAWS) patients (22.3%) showed a better vaginal cleaning effect against Gram-positive and -negative bacteria than BT patients (14.4%). Moreover, 18 patients in the BT group showed worsened vaginal contamination, whereas five patients in the PAWS group showed worsened vaginal contamination. Taken together, the noncontact method of spraying cleaning water to the vagina exhibited a reliable vaginal cleaning effect without further bacterial infection compared with BT. Therefore, we suggest a clinical application of the spraying method using PAW for vaginal cleaning to patients with vaginitis without disinfectants and antibiotics.

Low Temperature Plasma Strategies for Xylella fastidiosa Inactivation

The quarantine bacterium Xylella fastidiosa was first detected in Salento (Apulia, Italy) in 2013 and caused severe symptoms in olives, leading to plant death. The disease, named Olive Quick Decline Syndrome (OQDS), is caused by the strain “De Donno” ST53 of the subspecies pauca of this bacterium (XfDD), which is spread by the insect Philaenus spumarius. The epidemic poses a serious threat to the agricultural economy and the landscape, as X. fastidiosa infects several plant species and there is yet no recognized solution. Research on OQDS is focused on finding strategies to control its spread or mitigate its symptoms. As a perspective solution, we investigated the efficacy of the low-temperature plasma and plasma-activated water to kill bacterial cells. Experiments were conducted in vitro to test the biocidal effect of the direct application of a Surface Dielectric Barrier Discharge (SDBD) plasma on bacteria cells and Plasma Activated Water (PAW). PAW activity was tested as a possible biocidal agent that can move freely in the xylem network paving the way to test the strategy on infected plants. The results showed a high decontamination rate even for cells of XfDD embedded in biofilms grown on solid media and complete inactivation in liquid culture medium.

Cold Atmospheric Plasma Attenuates Breast Cancer Cell Growth Through Regulation of Cell Microenvironment Effectors

Breast cancer exists in multiple subtypes some of which still lack a targeted and effective therapy. Cold atmospheric plasma (CAP) has been proposed as an emerging anti-cancer treatment modality. In this study, we investigated the effects of direct and indirect CAP treatment driven by the advantageous nanosecond pulsed discharge on breast cancer cells of different malignant phenotypes and estrogen receptor (ER) status, a major factor in the prognosis and therapeutic management of breast cancer. The main CAP reactive species in liquid (i.e. H2O2, NO2−/NO3−) and gas phase were determined as a function of plasma operational parameters (i.e. treatment time, pulse voltage and frequency), while pre-treatment with the ROS scavenger NAC revealed the impact of ROS in the treatment. CAP treatment induced intense phenotypic changes and apoptosis in both ER+ and ER- cells, which is associated with the mitochondrial pathway as evidenced by the increased Bax/Bcl-2 ratio and cleavage of PARP-1. Interestingly, CAP significantly reduced CD44 protein expression (a major cancer stem cell marker and matrix receptor), while differentially affected the expression of proteases and inflammatory mediators. Collectively, the findings of the present study suggest that CAP suppresses breast cancer cell growth and regulates several effectors of the tumor microenvironment and thus it could represent an efficient therapeutic approach for distinct breast cancer subtypes.

The Antimicrobial Efficacy Of Plasma Activated Water Against Listeria and E. coli Is Modulated By Reactor Design And Water Composition

AIMS

This study aimed to compare the efficacy of plasma activated water (PAW) generated by two novel plasma reactors against pathogenic foodborne illness organisms.

METHODS AND RESULTS

The antimicrobial efficacy of PAW produced by a bubble spark discharge (BSD) reactor and a dielectric barrier discharge-diffuser (DBDD) reactor operating at atmospheric conditions with air, multiple discharge frequencies and Milli-Q and tap water, was investigated with model organisms Listeria innocua and Escherichia coli in situ. Optimal conditions were subsequently employed for pathogenic bacteria Listeria monocytogenes, E. coli and Salmonella enterica. DBDD-PAW reduced more than 6-log of bacteria within 1 minute. The BSD-PAW, while attaining high log reduction, was less effective. Analysis of physicochemical properties revealed that BSD-PAW had a greater variety of reactive species than DBDD-PAW. Scavenger assays designed to specifically sequester reactive species demonstrated a critical role of superoxide, particularly in DBDD-PAW.

CONCLUSIONS

DBDD-PAW demonstrated rapid antimicrobial activity against pathogenic bacteria, with superoxide the critical reactive species.

SIGNIFICANCE AND IMPACT OF STUDY

This study demonstrates the potential of DBDD-PAW produced using tap water and air as a feasible and cost-effective option for antimicrobial applications, including food safety.

Functional nanomaterials, synergisms, and biomimicry for environmentally benign marine antifouling technology

Marine biofouling remains one of the key challenges for maritime industries, both for seafaring and stationary structures. Currently used biocide-based approaches suffer from significant drawbacks, coming at a significant cost to the environment into which the biocides are released, whereas novel environmentally friendly approaches are often difficult to translate from lab bench to commercial scale. In this article, current biocide-based strategies and their adverse environmental effects are briefly outlined, showing significant gaps that could be addressed through advanced materials engineering. Current research towards the use of natural antifouling products and strategies based on physio-chemical properties is then reviewed, focusing on the recent progress and promising novel developments in the field of environmentally benign marine antifouling technologies based on advanced nanocomposites, synergistic effects and biomimetic approaches are discussed and their benefits and potential drawbacks are compared to existing techniques.

Decontamination-Induced Modification of Bioactivity in Essential Oil-Based Plasma Polymer Coatings

Plasma polymer coatings fabricated from Melaleuca alternifolia essential oil and its derivatives have been previously shown to reduce the extent of microbial adhesion on titanium, polymers, and other implantable materials used in dentistry. Previous studies have shown these coatings to maintain their performance under standard operating conditions; however, when used in e.g., a dental implant, these coatings may inadvertently become subject to in situ cleaning treatments, such as those using an atmospheric pressure plasma jet, a promising tool for the effective in situ removal of biofilms from tissues and implant surfaces. Here, we investigated the effect of such an exposure on the antimicrobial performance of the Melaleuca alternifolia polymer coating. It was found that direct exposure of the polymer coating surface to the jet for periods less than 60 s was sufficient to induce changes in its surface chemistry and topography, affecting its ability to retard subsequent microbial attachment. The exact effect of the jet exposure depended on the chemistry of the polymer coating, the length of plasma treatment, cell type, and incubation conditions. The change in the antimicrobial activity for polymer coatings fabricated at powers of 20–30 W was not statistically significant due to their limited baseline bioactivity. Interestingly, the bioactivity of polymer coatings fabricated at 10 and 15 W against Staphylococcus aureus cells was temporarily improved after the treatment, which could be attributed to the generation of loosely attached bioactive fragments on the treated surface, resulting in an increase in the dose of the bioactive agents being eluted by the surface. Attachment and proliferation of Pseudomonas aeruginosa cells and mixed cultures were less affected by changes in the bioactivity profile of the surface. The sensitivity of the cells to the change imparted by the jet treatment was also found to be dependent on their origin culture, with mature biofilm-derived P. aeruginosa bacterial cells showing a greater ability to colonize the surface when compared to its planktonic broth-grown counterpart. The presence of plasma-generated reactive oxygen and nitrogen species in the culture media was also found to enhance the bioactivity of polymer coatings fabricated at power levels of 10 and 15 W, due to a synergistic effect arising from simultaneous exposure of cells to reactive oxygen and nitrogen species (RONS) and eluted bioactive fragments. These results suggest that it is important to consider the possible implications of inadvertent changes in the properties and performance of plasma polymer coatings as a result of exposure to in situ decontamination, to both prevent suboptimal performance and to exploit possible synergies that may arise for some polymer coating-surface treatment combinations.

The Effect of Mass Transfer Rate-Time in Bubbles on Removal of Azoxystrobin in Water by Micro-Sized Jet Array Discharge

In this work, the azoxystrobin removal in water by using a micro-size discharge array was investigated, and the removal efficiency can reach as high as 98.1% after 9 min plasma treatment as well as the energy utilization being only 0.73 g/(kW·h). Based on the relationship between the generation of gas bubbles and parameters of gas-liquid discharge, it was found that the variation of applied voltage, gas flow rate and initial solution temperature could cause particle number change, mass transfer rate change and the mass transfer time change, which significantly affected the practical applications at last. The experimental results indicated that when gas flow rate was 0.7 SLM (Standard Liter per Minute) and the initial solution temperature was 297 K with the applied voltage of 8 kV and discharge frequency of 6 kHz, the removal efficiency of azoxystrobin achieved maximum. Based on the analysis results of liquid mass spectrometry, the removal pathways of azoxystrobin were supposed by the decomposed by-products. Toxicity tests indicated that the decomposed products were safe and non-toxic. So, this study may reveal an azoxystrobin degradation mechanism and provide a safe, reliable and effective way for azoxystrobin degradation.

Epithelial-to-Mesenchymal Transition Enhances Cancer Cell Sensitivity to Cytotoxic Effects of Cold Atmospheric Plasmas in Breast and Bladder Cancer Systems

Cold atmospheric plasma (CAP) has emerged as a highly selective anticancer agent, most recently in the form of plasma-activated medium (PAM). Since epithelial-mesenchymal transition (EMT) has been implicated in resistance to various cancer therapies, we assessed whether EMT status is associated with PAM response. Mesenchymal breast cancer cell lines, as well as the mesenchymal variant in an isogenic EMT/MET human breast cancer cell system (PMC42-ET/LA), were more sensitive to PAM treatment than their epithelial counterparts, contrary to their responses to other therapies. The same trend was seen in luminal muscle-invasive bladder cancer model (TSU-Pr1/B1/B2) and the non-muscle-invasive basal 5637 bladder cancer cell line. Three-dimensional spheroid cultures of the bladder cancer cell lines were less sensitive to the PAM treatment compared to their two-dimensional counterparts; however, incrementally better responses were again seen in more mesenchymally-shifted cell lines. This study provides evidence that PAM preferentially inhibits mesenchymally-shifted carcinoma cells, which have been associated with resistance to other therapies. Thus, PAM may represent a novel treatment that can selectively inhibit triple-negative breast cancers and a subset of aggressive bladder cancers, which tend to be more mesenchymal. Our approach may potentially be utilized for other aggressive cancers exhibiting EMT and opens new opportunities for CAP and PAM as a promising new onco-therapy.

Interactions of plasma-activated water with biofilms: inactivation, dispersal effects and mechanisms of action

Biofilms have several characteristics that ensure their survival in a range of adverse environmental conditions, including high cell numbers, close cell proximity to allow easy genetic exchange (e.g., for resistance genes), cell communication and protection through the production of an exopolysaccharide matrix. Together, these characteristics make it difficult to kill undesirable biofilms, despite the many studies aimed at improving the removal of biofilms. An elimination method that is safe, easy to deliver in physically complex environments and not prone to microbial resistance is highly desired. Cold atmospheric plasma, a lightning-like state generated from air or other gases with a high voltage can be used to make plasma-activated water (PAW) that contains many active species and radicals that have antimicrobial activity. Recent studies have shown the potential for PAW to be used for biofilm elimination without causing the bacteria to develop significant resistance. However, the precise mode of action is still the subject of debate. This review discusses the formation of PAW generated species and their impacts on biofilms. A focus is placed on the diffusion of reactive species into biofilms, the formation of gradients and the resulting interaction with the biofilm matrix and specific biofilm components. Such an understanding will provide significant benefits for tackling the ubiquitous problem of biofilm contamination in food, water and medical areas.

Underwater microplasma bubbles for efficient and simultaneous degradation of mixed dye pollutants

Complete degradation of mixtures of organic pollutants is a major challenge due to their diverse degradation pathways. In this work, a novel microplasma bubble (MPB) reactor was developed to generate plasma discharges inside small forming bubbles as an effective mean of delivering reactive species for the degradation of the target organic contaminants. The results show that the integration of plasma and bubbles resulted in efficient degradation for all azo, heterocyclic, and cationic dyes, evidenced by the outstanding energy efficiency of 13.0, 18.1 and 22.1 g/kWh with 3 min of processing, in degrading alizarin yellow (AY), orange II (Orng-II) and methylene blue (MB), individually. The MPB treatment also effectively and simultaneously degraded the dyes in their mixtures such as AY + Orng-II, AY + MB and AY + Orng-II + MB. Scavenger assays revealed that the short-lived reactive species, including the hydroxyl (OH) and superoxide anion (O₂^-) radicals, played the dominant role in the degradation of the pollutants. Possible degradation pathways were proposed based on the intermediate products detected during the degradation process. The feasibility of this proposed strategy was further evaluated using other common water pollutants. Reduced toxicity was confirmed by the observed increases in human cell viability for the treated water. This work could support the future development of high performance- and energy-efficient wastewater abatement technologies.

Inactivation of Salmonella Typhimurium by Non-Thermal Plasma Bubbles: Exploring the Key Reactive Species and the Influence of Organic Matter

The key reactive species generated by non-thermal plasma bubbles for the inactivation of Salmonella Typhimurium and the effects of organic matter on the inactivation efficacy were investigated. Plasma, which is primarily composed of ozone (O₃), was generated by dielectric barrier discharge and injected into a solution (400 mL) as a bubble. The surviving population of S. Typhimurium decreased in proportion to the treatment time, resulting in a 5.29 log reduction after 5 min of treatment. Verification tests to specify key reactive species were conducted using an O₃ destruction unit and reactive oxygen species scavengers. The results indicated that singlet oxygen (¹O₂) contributes substantially to the inactivation of S. Typhimurium, and that the presence of superoxide anion radicals (O₂^·−) from O₃ is essential for the production of ¹O₂. When a S. Typhimurium suspension containing organic matter (final concentration: 0, 0.005, 0.05, 0.1, and 0.5 g/L), consisting of beef extract and peptone, was treated with plasma bubbles for 5, 10, 15, 20, 25, and 30 min, respectively, the potential of the plasma bubbles for inactivating S. Typhimurium successfully was verified with longer contact time, despite organic matter attenuating the inactivation efficiency in a dose-dependent manner.

Fighting Mixed-Species Microbial Biofilms With Cold Atmospheric Plasma

Most biofilms in nature are formed by multiple microbial species, and such mixed-species biofilms represent the actual lifestyles of microbes, including bacteria, fungi, viruses (phages), and/or protozoa. Microorganisms cooperate and compete in mixed-species biofilms. Mixed-species biofilm formation and environmental resistance are major threats to water supply, food industry, and human health. The methods commonly used for microbial eradication, such as antibiotic or disinfectant treatments, are often ineffective for mixed-species biofilm consortia due to their physical matrix barrier and physiological interactions. For the last decade, an increasing number of investigations have been devoted to the usage of cold atmospheric plasma (CAP), which is produced by dielectric barrier discharges or plasma jets to prevent or eliminate microbial biofilms. Here, we summarized the production of CAP, the inactivation of microorganisms upon CAP treatment, and the microbial factors affecting the efficacy of CAP procedure. The applications of CAP as antibiotic alternative strategies for fighting mixed-species biofilms were also addressed.

High-Performance Plasma-Enabled Biorefining of Microalgae to Value-Added Products

Conversion of renewable biomass by time- and energy-efficient techniques remains an important challenge. Herein, plasma catalytic liquefaction (PCL) is employed to achieve rapid liquefaction of microalgae under mild conditions. The choice of the catalyst affects both the liquefaction efficiency and the yield of products. The acid catalyst is more effective and gave a liquid yield of 73.95 wt % in 3 min, as opposed to 69.80 wt % obtained with the basic catalyst in 7 min. Analyses of the thus-formed products and the processing environment reveal that the enhanced PCL performance is linked to the rapid increase in temperature under the effect of plasma-induced electric fields and the generation of large quantities of reactive species. Moreover, the obtained solid residue can be simply upgraded to a carbon product suitable for supercapacitor applications. Therefore, the proposed strategy may provide a new avenue for fast and comprehensive utilization of biomass under benign conditions.

Antibiofilm Platform based on the Combination of Antimicrobial Polymers and Essential Oils

The development of potent strategies to counter microbial biofilm is an urgent priority in healthcare. The majority of bacterial infections in humans are biofilm related, however, effective treatments are still lacking especially for combating multidrug-resistant (MDR) strains. Herein, we report an effective antibiofilm platform based on the use of synthetic antimicrobial polymers in combination with essential oils, where the antimicrobial polymers play a secondary role as delivery vehicle for essential oils. Two ternary antimicrobial polymers consisting of cationic primary amines, low-fouling oligo(ethylene glycol) and hydrophobic ethylhexyl groups were synthesized in the form of random and block copolymers, and mixed with either carvacrol or eugenol. Coadministration of these compounds improved the efficacy against Pseudomonas aeruginosa biofilms compared to the individual compounds. We observed about a 60-75% and 70-85% biofilm inhibition effect for all tested combinations against wild-type P. aeruginosa PAO1 and MDR strain PA37, respectively, upon 6.5 h of incubation time. While both random and block copolymers demonstrated similar biofilm inhibition potencies in combination with essential oils, only the block copolymer acted synergistically with essential oils in killing biofilm. Treatment of PAO1 biofilm for 20 min with the block copolymer-oil combinations resulted in the killing of >99.99% of biofilm bacteria. This synergistic bactericidal activity is attributed to the targeted delivery of essential oils to the biofilm, driven by the electrostatic interaction between positively charged delivery vehicles, in the form of polymeric micelles, and negatively charged bacteria. This study thus highlights the advantage of combining essential oils and antimicrobial polymers as an effective avenue for antibacterial applications.

Prussian blue analogue nanoenzymes mitigate oxidative stress and boost bio-fermentation

Oxidative stress in cells caused by the accumulation of reactive oxygen species (ROS) is a common cause of cell function degeneration, cell death and various diseases. Efficient, robust and inexpensive nanoparticles (nanoenzymes) capable of scavenging/detoxifying ROS even in harsh environments are attracting strong interest. Prussian blue analogues (PBAs), a prominent group of metalorganic nanoparticles (NPs) with the same cyanometalate structure as the traditional and commonly used Prussian blue (PB), have long been envisaged to mimic enzyme activities for ROS scavenging. However, their biological toxicity, especially potential effects on living beings during practical application, has not yet been fully investigated. Here we reveal the enzyme-like activity of FeCo-PBA NPs, and for the first time investigate the effects of FeCo-PBA on cell viability and growth. We elucidate the effect of the nanoenzyme on the ethanol-production efficacy of a typical model organism, the engineered industrial strain Saccharomyces cerevisiae. We further demonstrate that FeCo-PBA NPs have almost no cytotoxicity on the cells over a broad dosage range (0-100 μg mL^-1), while clearly boosting the yeast fermentation efficiency by mitigating oxidative stress. Atmospheric pressure cold plasma (APCP) pretreatment is used as a multifunctional environmental stress produced by the plasma reactive species. While the plasma enhances the cellular uptake of NPs, FeCo-PBA NPs protect the cells from the oxidative stress induced by both the plasma and the fermentation processes. This synergistic effect leads to higher secondary metabolite yields and energy production. Collectively, this study confirms the positive effects of PBA nanoparticles in living cells through ROS scavenging, thus potentially opening new ways to control the cellular machinery in future nano-biotechnology and nano-biomedical applications.

Recent advances in plasma modification of 2D transition metal dichalcogenides

Two-dimensional (2D) transition metal dichalcogenide (TMDC) materials have recently attracted great interest because of their tantalising prospects for a broad range of applications including electronics, optoelectronics, and energy storage. Unlike bulk materials, the device performance of atomically thin 2D materials is determined by the interface, thickness and defects. Plasma processing is very effective for diverse modifications of nanoscale 2D TMDC materials, owing to its uniquely controllable, effective processes and energy efficiency. Herein, we critically discuss selected recent advances in plasma modification of 2D TMDC materials and their optical and electronic (including optoelectronic) properties of relevance to applications in hydrogen production, gas sensing and energy storage devices. Challenges and future research opportunities in the relevant research field are presented. This review contributes to directing future advances of plasma processing of TMDC materials for targeted applications.