AIE Supramolecular Assembly with FRET Effect for Visualizing Drug Delivery

Recent Progress in Nonconventional Luminescent Macromolecules and their Applications

Traditional π-conjugated luminescent macromolecules typically suffer from aggregation-caused quenching (ACQ) and high cytotoxicity, and they require complex synthetic processes. In contrast, nonconventional luminescent macromolecules (NCLMs) with nonconjugated structures possess excellent biocompatibility, ease of preparation, unique luminescence behavior, and emerging applications in optoelectronics, biology, and medicine. NCLMs are currently believed to produce inherent luminescence due to through-space conjugation of overlapping electron orbitals in solid/aggregate states. However, as experimental facts continue to exceed expectations or even overturn some previous assumptions, there is still controversy about the detailed luminous mechanism of NCLMs, and extensive studies are needed to further explore the mechanism. This Perspective highlights recent progress in NCLMs and classifies and summarizes these advances from the viewpoint of molecular design, mechanism exploration, applications, and challenges and prospects. The aim is to provide guidance and inspiration for the huge fundamental and practical potential of NCLMs.

Hyperbranched Polyborosiloxanes: Non-traditional Luminescent Polymers with Red Delayed Fluorescence

Non-traditional fluorescent polymers have attracted significant attention for their excellent biocompatibility and diverse applications. However, designing and preparing non-traditional fluorescent polymers that simultaneously possess long emission wavelengths and long fluorescence lifetime remains challenging. In this study, a series of novel hyperbranched polyborosiloxanes (P1-P4) were synthesized. As the electron density increases on the monomer diol, the optimal emission wavelengths of the P1-P4 polymers gradually red-shift to 510, 570, 575, and 640 nm, respectively. In particular, P4 not only exhibits red emission but also demonstrates delayed fluorescence with a lifetime of 9.73 μs and the lowest critical cluster concentration (1.76 mg/mL). The experimental results and theoretical calculations revealed that the synergistic effect of dual heteroatom-induced electron delocalization and through-space O⋅⋅⋅O and O⋅⋅⋅N interaction was the key factor contributing to the red-light emission with delayed fluorescence. Additionally, these polymers showed excellent potential in dual-information encryption. This study provides a universal design strategy for the development of unconventional fluorescent polymers with both delayed fluorescence and long-wavelength emission.

Glutathione-Responsive Tannic Acid-Assisted FRET Nanomedicine for Cancer Therapy

In cancer combination therapy, a multimodal delivery vector is used to improve the bioavailability of multiple anti-cancer hydrophobic drugs. Further, targeted delivery of therapeutics along with simultaneous monitoring of the drug release at the tumor site without normal organ toxicity is an emerging and effective strategy for cancer treatment. However, the lack of a smart nano-delivery system limits the application of this therapeutic strategy. To overcome this issue, a PEGylated dual drug, conjugated amphiphilic polymer (CPT-S-S-PEG-CUR), has been successfully synthesized by conjugating two hydrophobic fluorescent anti-cancer drugs, curcumin (CUR) and camptothecin (CPT), through an ester and a redox-sensitive disulfide (-S-S-) linkage, respectively, with a PEG chain via in situ two-step reactions. CPT-S-S-PEG-CUR is spontaneously self-assembled in the presence of tannic acid (TA, a physical crosslinker) into anionic, comparatively smaller-sized (~100 nm), stable nano-assemblies in water in comparison to only polymer due to stronger H-bond formation between polymer and TA. Further, due to the spectral overlap between CPT and CUR and a stable, smaller nano-assembly formation by the pro-drug polymer in water in presence of TA, a successful Fluorescence Resonance Energy Transfer (FRET) signal was generated between the conjugated CPT (FRET donor) and conjugated CUR (FRET acceptor). Interestingly, these stable nano-assemblies showed a preferential breakdown and release of CPT in a tumor-relevant redox environment (in the presence of 50 mM glutathione), leading to the disappearance of the FRET signal. These nano-assemblies exhibited a successful cellular uptake by the cancer cells and an enhanced antiproliferative effect in comparison to the individual drugs in cancer cells (AsPC1 and SW480). Such promising in vitro results with a novel redox-responsive, dual-drug conjugated, FRET pair-based nanosized multimodal delivery vector can be highly useful as an advanced theranostic system towards effective cancer treatment.

Quantitative Measurement of Drug Release Dynamics within Targeted Organelles Using Förster Resonance Energy Transfer

Measuring the release dynamics of drug molecules after their delivery to the target organelle is critical to improve therapeutic efficacy and reduce side effects. However, it remains challenging to quantitatively monitor subcellular drug release in real time. To address the knowledge gap, a novel gemini fluorescent surfactant capable of forming mitochondria-targeted and redox-responsive nanocarriers is designed. A quantitative Förster resonance energy transfer (FRET) platform is fabricated using this mitochondria-anchored fluorescent nanocarrier as a FRET donor and fluorescent drugs as a FRET acceptor. The FRET platform enables real-time measurement of drug release from organelle-targeted nanocarriers. Moreover, the obtained drug release dynamics can evaluate the duration of drug release at the subcellular level, which established a new quantitative method for organelle-targeted drug release. This quantitative FRET platform can compensate for the absent assessment of the targeted release performances of nanocarriers, offering in-depth understanding of the drug release behaviors at the subcellular targets.

MOFs-alginate/polyacrylic acid/poly (ethylene imine) heparin-mimicking beads as a novel hemoadsorbent for bilirubin removal in vitro and vivo models

Metal-organic frameworks (MOFs) have a potential application in blood purification, but their microcrystalline nature has hampered their industrial application. Here, novel MOFs-polymer beads based on UiO, sodium alginate, polyacrylic acid, and poly (ethylene imine) were prepared and applied as a whole blood hemoadsorbent for the first time. The amidation among polymers immobilized UiO66-NH₂ into the network of the optimal product (SAP-3), and the NH₂ of UiO66-NH₂ significantly increased the removal rate (70 % within 5 min) of SAP-3 on bilirubin. The adsorption of SAP-3 on bilirubin mainly obeyed the pseudo-second-order kinetic, Langmuir isotherm and Thomas models with a maximum adsorption capacity (q_m) of 63.97 mg·g^-1. Experimental and density functional theory simulation results show that bilirubin was mainly adsorbed by UiO66-NH₂via electrostatic force, hydrogen bonding, and π-π interactions. Notably, the adsorption in vivo show that the total bilirubin removal rate in the whole blood of the rabbit model was up to 42 % after 1 h of adsorption. Given its excellent stability, cytotoxicity, and hemocompatibility, SAP-3 has a great potential in hemoperfusion therapy. This study proposes an effective strategy for settling the powder property of MOFs and could provide experimental and theoretical references for application of MOFs in blood purification.

Aggregation emission of AuNCs induced by chitosan self-assembled multilayers and sensitive sensing for water content in ethanol

AuNCs with chemical groups such as -NH₂ and -COOH were synthesized using glutathione as the stabilizer and reducing agent. The aggregation emission of AuNCs in solution-induced self-assembled multilayers (SAMs) were first studied. Scanning electron microscopy and quartz crystal microbalance were used to characterize the morphology and aggregation process of AuNCs. Further AuNC SAMs were used for the solid-liquid interface sensing of water content in ethanol, and the sensitivity is obviously improved as compared with that in the pure solution phase. This aggregation emission induced by SAMs would have a good application prospect in analysis.

Polymerization boosting cascade energy transfer based on opened glucopyranosyl β-cyclodextrin

An injectable polysaccharide supramolecular hydrogel was successfully fabricated from opened D-glucopyranosyl β-cyclodextrin with four aldehyde groups (ACD) cross-linked with biomacromolecule chitosan (CS), which was not only beneficial to the clustering-triggered emission of CS with high quantum yield (32.25%), but also could co-assemble with a first stage acceptor triphenylamine derivative (TPA) and encapsulate Cyanine 5 (Cy5) or Nile blue (NiB) achieving supramolecular cascade energy transfer from the cross-linked polymer to the dyes, leading to fluorescence emission at 673 nm or 680 nm, and could be further applied in cell imaging.

Designs and Applications of Multi-stimuli Responsive FRET Processes in AIEgen-Functionalized and Bi-fluorophoric Supramolecular Materials

Materials capable of displaying strong ratiometric fluorescence with Förster resonance energy transfer (FRET) processes have attracted much research interest because of various chemosensor and biomedical applications. This review highlights several popular strategies in designing FRET-OFF/ON mechanisms of ratiometric fluorescence systems. In particular, the developments of organic and polymeric FRET materials featuring aggregation-induced emission-based luminogens (AIEgens), supramolecular assemblies, photochromic molecular switches and surfactant-induced AIE/FRET mechanisms are presented. AIEgens have been frequently employed as FRET donor and/or acceptor fluorophores to obtain enhanced ratiometric fluorescences in solution and solid states. Since AIE effects and FRET processes rely on controllable distances between fluorophores, many interesting fluorescent properties can be designed by regulating aggregation states in polymers and supramolecular systems. Photo-switchable fluorophores, such as spiropyran and diarylethene, provide drastic changes in fluorescence spectra upon photo-induced isomerizations, leading to photo-switching mechanisms to activate/deactivate FRET processes. Supramolecular assemblies offer versatile platforms to regulate responsive FRET processes effectively. In rotaxane structures, the donor-acceptor distance and FRET efficiency can be tuned by acid/base-controlled shuttling of the macrocycle component. The tunable supramolecular interactions are strongly influenced by external factors (such as pH values, temperatures, analytes, surfactants, UV-visible lights, etc.), which induce the assembly and disassembly of host-guest systems and thus their FRET-ON/FRET-OFF behavior. In addition, the changes in donor or acceptor fluorescence profiles upon detections of analytes can also sufficiently alter the FRET behavior and result in different ratiometric fluorescence outputs. The strategies and examples provided in this review offer the insights and toolkits for future FRET-based material developments.

Stimuli-Responsive Aggregation-Induced Emission (AIE)-Active Polymers for Biomedical Applications

At high concentration or in the aggregated state, most of the traditional luminophores suffer from the general aggregation-caused quenching (ACQ) effect, which significantly limits their biomedical applications. On the contrary, a few fluorophores exhibit an aggregation-induced emission (AIE) feature which is just the opposite of ACQ. The luminophores with aggregation-induced emission (AIEgens) have exhibited noteworthy advantages to get tunable emission, excellent photostability, and biocompatibility. Incorporating AIEgens into polymer design has yielded diversified polymer systems with fascinating photophysical characteristics. Again, stimuli-responsive polymers are capable of undergoing chemical and/or physical property changes on receiving signals from single or multiple stimuli. The combination of the AIE property and stimuli responses in a single polymer platform provides a feasible and effective strategy for the development of smart polymers with promising biomedical applications. Herein, the advancements in stimuli-responsive polymers with AIE characteristics for biomedical applications are summarized. AIE-active polymers are first categorized into conventional π-π conjugated and nonconventional fluorophore systems and then subdivided based on various stimuli, such as pH, redox, enzyme, reactive oxygen species (ROS), and temperature. In each section, the design strategies of the smart polymers and their biomedical applications, including bioimaging, cancer theranostics, gene delivery, and antimicrobial examples, are introduced. The current challenges and future perspectives of this field are also stated at the end of this review article.

Brush-like Polymer Prodrug with Aggregation-Induced Emission Features for Precise Intracellular Drug Tracking

In this study, a brush-like polymer with aggregation-induced emission (AIE) features was synthesized for drug delivery and intracellular drug tracking. The polymer consisting of tetraphenylethene (TPE) chain-end as well as oligo-poly (ethylene glycol) (PEG) and hydrazine functionalities was successfully synthesized through copper (0)-mediated reversible-deactivation radical polymerization (Cu0-mediated RDRP). Anticancer drug doxorubicin (DOX) was conjugated to the polymer and formed a prodrug named TPE-PEGA-Hyd-DOX, which contains 11% DOX. The hydrazone between DOX and polymer backbone is a pH-sensitive linkage that can control the release of DOX in slightly acidic conditions, which can precisely control the DOX release rate. The drug release of 10% after 96 h in normal cell environments compared with about 40% after 24 h in cancer cell environments confirmed the influence of the hydrazone bond. The ratiometric design of fluorescent intensities with peaks at 410 nm (emission due to AIE feature of TPE) and 600 nm (emission due to ACQ feature of DOX) provides an excellent opportunity for this product as a precise intracellular drug tracker. Cancer cells confocal microscopy showed negligible DOX solution uptake, but an intense green emission originated from prodrug uptake. Moreover, a severe red emission in the DOX channel confirmed a promising level of drug release from the prodrug in the cytoplasm. The merged images of cancer cells confirmed the high performance of the TPE-PEGA-Hyd-DOX compound in the viewpoints of cellular uptake and drug release. This polymer prodrug successfully demonstrates low cytotoxicity in healthy cells and high performance in killing cancer cells.

Advances in Intelligent-Responsive Nanocarriers for Cancer Therapy

With the rapid development of nanotechnology, strategies related to nanomedicine have been used to overcome the shortcomings of traditional chemotherapy drugs, thereby demonstrating significant potential for innovative drug delivery. Nanomaterials play an increasingly important role in cancer immunotherapy. Stimuli-responsive nanomaterials enable the precise control of drug release through exposure to specific stimuli and exhibit excellent specificity in response to various stimuli. Immunomodulators carried by nanomaterials can also effectively regulate the immune system and significantly improve their therapeutic effect on cancer. In recent years, stimuli-responsive nanomaterials have evolved rapidly from single stimuli-responsive systems to multi-stimuli-responsive systems. This review focuses on recent advances in the design and applications of stimuli-responsive nanomaterials, including exogenous and endogenous responsive nanoscale drug delivery systems, which show extraordinary potential in intelligent drug delivery for multimodal cancer diagnosis and treatment. Ultimately, the opportunities and challenges in the development of intelligent responsive nanomaterials are briefly discussed according to recent advances in multi-stimuli-responsive systems.

Novel ROS-responsive marine biomaterial fucoidan nanocarriers with AIE effect and chemodynamic therapy

Chemodynamic therapy (CDT) has been widely used in the treatment of many kinds of tumors, which can effectively induce tumor cell apoptosis by using produced reactive oxygen species (ROS). In this paper, ROS-sensitive multifunctional marine biomaterial natural polysaccharide nanoparticles were designed. Aggregation-induced emission (AIE) molecules tetraphenylethylene (TPE) labeled and caffeic acid (CA) modified fucoidan (FUC) amphiphilic carrier material (CA-FUC-TK-TPE, CFTT) was fabricated, in which the thioketal bond(TK) was used as the linkage arm between TPE and fucoidan chain, giving the CFTT material ROS sensitivity. In addition, amphiphilic carrier material (FUC-TK-VE, FTVE) composed of thioketal-linked vitamin E and fucoidan was synthesized. The mixed carrier material CFTT and FTVE self-assembled in water to form nanoparticles (CFTT - FTVE@PTX-Fe³⁺) loaded with PTX and Fe³⁺. The CDT effect was combined with the chemotherapeutic drug PTX to achieve tumor inhibition. In vitro cell studies have proved that CT/PTX nanoparticles have excellent cell permeability and tumor cytotoxicity. In vivo antitumor experiments confirmed effective antitumor activity and reduced side effects.

AIE-active macromolecules: designs, performances, and applications

Aggregation-induced emission (AIE) macromolecules as emerging luminescent materials gained increasing attention owing to their good processability, high brightness, wide functionality, and smart responsiveness, with great potential in many fields.

Thermo-responsive poly(N-isopropylacrylamide)-hyaluronic acid nano-hydrogel and its multiple applications

It is a huge challenge to construct a nanoprobe that can convert temperature stimulation into monochromatic signal with "turn-on" function. Here, a drug delivery system of berberine (BBR)-loaded hyaluronic acid (HA)-modified-L-cysteine (Cys) grafted (N-isopropylacrylamide) (PNIPAM) was structured. HA-Cys-PN/BBR does not need to introduce other substances or external stimuli, by adjusting the temperature of this system, the fluorescence responsive intensity and reversible reciprocating control of the nanohydrogel with aggregation induced emission (AIE) performance can be realized. In addition, CD44-HA interaction can be used as targeting the delivery of cancer cells, thus, there is a great interest in development of targeting and imaging agents as payloads for tumor tissue therapy. Therefore, it can provide a side of the development with self-released drugs in the therapy of cancers or bacterial infections. Thus, HA-Cys-PN/BBR as AIE reversible nanogel has longer-term applications in biomedical applications.

Self-Reporting Polysaccharide Polymersome for Doxorubicin and Cisplatin Delivery to Live Cancer Cells

We report self-reporting fluorescent polysaccharide polymersome nanoassemblies for enzyme-responsive intracellular delivery of two clinical anticancer drugs doxorubicin (DOX) and cisplatin to study the real-time drug-releasing aspects by fluorescent resonance energy transfer (FRET) bioimaging in live cancer cells. Fluorescent polymersomes were tailor-made by tagging an aggregation-induced emission (AIE) optical chromophore, tetraphenylethylene (TPE), and a plant-based vesicular directing hydrophobic unit through enzyme-biodegradable aliphatic ester chemical linkages in the polysaccharide dextran. The blue-luminescent polymersome self-assembled in water and exhibited excellent encapsulation capability for the red-luminescent anticancer drug DOX. FRET between the AIE polymersome host and DOX guest molecules resulted in a completely turn-off probe. At the intracellular level, the lysosomal enzymatic disassembly of the polymersome restored the dual fluorescent signals from DOX and TPE at the nucleus and the lysosomes, respectively. Live-cell confocal microscopy coupled with selective photoexcitation was employed to study the real-time polymersome disassembly by monitoring the turn-on fluorescent signals in human breast cancer cell lines. Alternatively, carboxylic acid-functionalized AIE polymersomes were also tailor-made for cisplatin stitching to directly monitor Pt drug delivery. The polymersome nanoassemblies exhibited excellent structural tolerance for the chemical conjugation of the Pt drugs, and the fluorescence signals were unaltered. An in vitro drug release study confirmed that the cisplatin-stitched fluorescent polymersomes were very stable under physiological conditions and underwent lysosomal enzymatic degradation to inhibit the cancer cell growth. A lysosomal colocalization experiment using confocal microscopy substantiates the enzyme-responsive degradation of these polymersomes to release both the encapsulated and conjugated drugs at the intracellular level. The present design provides a unique opportunity to deliver more than one anticancer drug from a single polymersome platform in cancer research.

Recent Advances in Aggregation-Induced Emission Active Materials for Sensing of Biologically Important Molecules and Drug Delivery System

The emergence and development of aggregation induced emission (AIE) have attracted worldwide attention due to its unique photophysical phenomenon and for removing the obstacle of aggregation-caused quenching (ACQ) which is the most detrimental process thereby making AIE an important and promising aspect in various fields of fluorescent material, sensing, bioimaging, optoelectronics, drug delivery system, and theranostics. In this review, we have discussed insights and explored recent advances that are being made in AIE active materials and their application in sensing, biological cell imaging, and drug delivery systems, and, furthermore, we explored AIE active fluorescent material as a building block in supramolecular chemistry. Herein, we focus on various AIE active molecules such as tetraphenylethylene, AIE-active polymer, quantum dots, AIE active metal-organic framework and triphenylamine, not only in terms of their synthetic routes but also we outline their applications. Finally, we summarize our view of the construction and application of AIE-active molecules, which thus inspiring young researchers to explore new ideas, innovations, and develop the field of supramolecular chemistry in years to come.

FRET Ratiometric Nanoprobes for Nanoparticle Monitoring

Fluorescence labelling is often used for tracking nanoparticles, providing a convenient assay for monitoring nanoparticle drug delivery. However, it is difficult to be quantitative, as many factors affect the fluorescence intensity. Förster resonance energy transfer (FRET), taking advantage of the energy transfer from a donor fluorophore to an acceptor fluorophore, provides a distance ruler to probe NP drug delivery. This article provides a review of different FRET approaches for the ratiometric monitoring of the self-assembly and formation of nanoparticles, their in vivo fate, integrity and drug release. We anticipate that the fundamental understanding gained from these ratiometric studies will offer new insights into the design of new nanoparticles with improved and better-controlled properties.

Nonconventional luminophores: characteristics, advancements and perspectives

Nonconventional luminophores devoid of remarkable conjugates have attracted considerable attention due to their unique luminescence behaviors, updated luminescence mechanism of organics and promising applications in optoelectronic, biological and medical fields. Unlike classic luminogens consisting of molecular segments with greatly extended electron delocalization, these unorthodox luminophores generally possess nonconjugated structures based on subgroups such as ether (-O-), hydroxyl (-OH), halogens, carbonyl (CO), carboxyl (-COOH), cyano (CN), thioether (-S-), sulfoxide (SO), sulfone (OSO), phosphate, and aliphatic amine, as well as their grouped functionalities like amide, imide, anhydride and ureido. They can exhibit intriguing intrinsic luminescence, generally featuring concentration-enhanced emission, aggregation-induced emission, excitation-dependent luminescence and prevailing phosphorescence. Herein, we review the recent progress in exploring these nonconventional luminophores and discuss the current challenges and future perspectives. Notably, different mechanisms are reviewed and the clustering-triggered emission (CTE) mechanism is highlighted, which emphasizes the clustering of the above mentioned electron rich moieties and consequent electron delocalization along with conformation rigidification. The CTE mechanism seems widely applicable for diversified natural, synthetic and supramolecular systems.

Recent Progress in Polymeric AIE-Active Drug Delivery Systems: Design and Application

Aggregation-induced emission (AIE) provides a new opportunity to overcome the drawbacks of traditional aggregation-induced quenching of chromophores. The applications of AIE-active fluorophores have spread across various fields. In particular, the employment of AIEgens in drug delivery systems (DDSs) can achieve imaging-guided therapy and pharmacodynamic monitoring. As a result, polymeric AIE-active DDSs are attracting increasing attention due to their obvious advantages, including easy fabrication and tunable optical properties by molecular design. Additionally, the design of polymeric AIE-active DDSs is a promising method for cancer therapy, antibacterial treatment, and pharmacodynamic monitoring, which indeed helps improve the effectiveness of related disease treatments and confirms its potential social importance. Here, we summarize the current available polymeric AIE-active DDSs from design to applications. In the design section, we introduce synthetic strategies and structures of AIE-active polymers, as well as responsive strategies for specific drug delivery. In the application section, typical polymeric AIE-active DDSs used for cancer therapy, bacterial treatment, and drug delivery monitoring are summarized with selected examples to elaborate on their wide applications.

Super-Assembled Periodic Mesoporous Organosilica Frameworks for Real-Time Hypoxia-Triggered Drug Release and Monitoring

Hypoxia, induced by inadequate oxygen supply, is a key indication of various major illnesses, which necessitates the need to develop new nanoprobes capable of sensing hypoxia environments for the targeted system monitoring and drug delivery. Herein, we report a hypoxia-responsive, periodic mesoporous organosilica (PMO) nanocarrier for repairing hypoxia damage. β-cyclodextrin (β-CD) capped azobenzene functionalization on the PMO surface could be effectively cleaved by azoreductase under a hypoxia environment. Moreover, the nanosystem is equipped with fluorescence resonance energy transfer (FRET) pair (tetrastyrene derivative (TPE) covalently attached to the PMO framework as the donor and Rhodamine B (RhB) in the mesopores as the receptor) for intracellular visualization and tracking of drug release in real-time. The design of intelligent nanocarriers capable of simultaneous reporting and treating of hypoxia conditions highlights a great potential in the biomedical domain.

Tailored Biosensors for Drug Screening, Efficacy Assessment, and Toxicity Evaluation

Biosensors have been flourishing in the field of drug discovery with pronounced developments in the past few years. They facilitate the screening and discovery of innovative drugs. However, there is still a lack of critical reviews that compare the merits and shortcomings of these biosensors from a pharmaceutical point of view. This contribution presents a critical and up-to-date overview on the recent progress of tailored biosensors, including surface plasmon resonance, fluorescent, photoelectrochemical, and electrochemical systems with emphasis on their mechanisms and applications in drug screening, efficacy assessment, and toxicity evaluation. Multiple functional nanomaterials have also been incorporated into the biosensors. Representative examples of each type of biosensors are discussed in terms of design strategy, response mechanism, and potential applications. In the end, we also compare the results and summarize the major insights gained from the works, demonstrating the challenges and prospects of biosensors-assisted drug discovery.

Seeking Aggregation-Induced Emission Materials in Food: Oat β-Glucan and Its Diverse Applications

With the basic understanding and broad application prospects of luminescent materials, the emission mechanism of unconventional luminescent agents has been revealed gradually. Here, we report a non-conjugated biomass material, oat β-glucan (oat-β-Glu), which actually does not emit light in a dilute solution but emits significantly when forming aggregates. Inherently visible emission of oat-β-Glu from the concentrated solutions and solid state could be observed. In addition, we have observed room temperature phosphorescence in oat-β-Glu powders, which is also unusual in pure organic materials. It can be proposed that the luminescence property of oat-β-Glu originates from the spatial conjugation of the oxygen atoms of oat-β-Glu. This clustering-triggered emission mechanism may well be expanded to other unconventional biomacromolecules, inspiring the rational design of luminescent agents. Due to its good biocompatibility and intrinsic emission characteristics, oat-β-Glu has shown great potential application prospects in bioimaging and biosensors.

Modulation of Aggregation-Induced Emission by Excitation Energy Transfer: Design and Application

Excitation energy transfer (EET) as a fundamental photophysical process is well-explored for developing functional materials with tunable photophysical properties. Compared to traditional fluorophores, aggregation-induced emission luminogens (AIEgens) exhibit unique advantages for building EET systems, especially serving as energy donors, due to their outstanding photophysical properties such as bright fluorescence in aggregation state, broad absorption and emission spectra, large Stokes shift, and high photobleaching resistance. In addition, the photophysical properties of AIEgens can be modulated by energy transfer for improved luminescence performance. Therefore, a variety of EET systems based on AIEgens have been constructed and their applications in different areas have been explored. In this review, we summarize recent progress in the design strategy of AIE-based energy transfer systems for light-harvesting, fluorescent probes and theranostic systems, with an emphasis on design strategies to achieve desirable properties. The limitations, challenges and future opportunities of AIE-EET systems are briefly outlined. Design strategies and applications (light-harvesting, fluorescent probe and theranostics) of AIEgen-based excitation energy systems are discussed in this review.

Poly(amino acid)s-based star AIEgens for cell uptake with pH-response and chiral difference

Chiral aggregation-induced emission luminogens (AIEgens) are the new-generation chiral sensors that regulate chiral signals from the molecular level to the macroscopic assembly. Expanding applications of chiral AIEgens and in-depth understanding of their chiral recognition in biological systems are meaningful. Herein, two star chiral AIEgens, consisting of tetraphenylethene (TPE) as core and poly(N-acryloyl-L(D) valine) (PLV or PDV) as arms, were precisely synthesized via atom transfer radical polymerization (ATRP) technique and named TPE-PLV and TPE-PDV. They possessed typical AIE characteristics and exhibited an increase in concentration-dependent fluorescence intensity. The two AIEgens were pH-responsive and had strong AIE-related emission in acidic solution. Importantly, AIEgens can enter the living cells by ATP dependent endocytosis, then light them up. The interactions between the AIEgens and living human hepatocarcinoma (HepG2) cells revealed that the internalization process of TPE-PLV and TPE-PDV was both chiral-dependent and pH-responsive. This novel strategy for synthesizing poly(amino acid)s functionalized AIEgens could inspire the development of promising fluorescent materials with chirality.

Energy transduction through FRET in self-assembled soft nanostructures based on surfactants/polymers: current scenario and prospects

The self-assembled systems of surfactants/polymers, which are capable of supporting energy funneling between fluorophores, have recently gained significant attraction. Surfactant and polymeric micelles form nanoscale structures spanning a radius of 2-10 nm are generally suitable for the transduction of energy among fluorophores. These systems have shown great potential in Förster resonance energy transfer (FRET) due to their unique characteristics of being aqueous based, tendency to remain self-assembled, spontaneous formation, tunable nature, and responsiveness to different external stimuli. This review presents current developments in the field of energy transfer, particularly the multi-step FRET processes in the self-assembled nanostructures of surfactants/polymers. The part one of this review presents a background and brief overview of soft systems and discusses certain aspects of the self-assemblies of surfactants/polymers and their co-solubilization property to bring fluorophores to close proximity to transduce energy. The second part of this review deals with single-step and multi-step FRET in the self-assemblies of surfactants/polymers and links FRET systems with advanced smart technologies including multicolor formation, data encryption, and artificial antenna systems. This review also discusses the diverse examples in the literature to present the emerging applications of FRET. Finally, the prospects regarding further improvement of FRET in self-assembled soft systems are outlined.

A Versatile Aggregation-induced Emission Fluorescent Probe for Visible Detection of pH

By tactfully structuring a luminescent molecule as an accurate pH probe with aggregation-induced emission (AIE) feature, it is significant to overcome aggregation-caused quenching of emitted light in practice. Herein, we present a simple AIE-active fluorescence probe for pH detection on the basis of intramolecular charge transfer (ICT) with wide response range and high sensitivity reaction. The donor-acceptor-donor (D-A-D) style probe utilized a conjugated structural hybrid of the electron-withdrawing nitrile group and electron-donating hydroxyl as well as dimethylamino groups for fluorescent platform. The AIE-active probe possesses good fluorescence under water fraction up to 90% in mixed MeOH/water system. Furthermore, it can be used in profiling and visualization of pH detection in MeOH/water system at f_w = 90% under UV 365 nm lamp. What's more, the probe can be employed to be a broad range test paper of pH detection, paving the way for low-cost practical applications.

Binding interactions and FRET between bovine serum albumin and various phenothiazine-/anthracene-based dyes: a structure-property relationship

The present study demonstrates binding interactions and Förster resonance energy transfer (FRET) between bovine serum albumin (BSA) and a series of structurally and electronically diverse phenothiazine (PTZ) and anthracene (ANT) dyes. Upon selective excitation of tryptophan (Trp) residues of BSA, radiationless energy transfer to a dye takes place, resulting in fluorescence quenching of the former. Fluorescence quenching mechanisms, FRET parameters, possible locations, and binding constants of dyes with the BSA have been examined to deduce a structure–property relationship. The mechanism of quenching is apparently static in nature. PTZ dyes with heteroatoms and a pentyl tail (C5-PTZ) attached to them were found to have a stronger binding affinity with BSA as compared to ANT dyes. Stronger binding affinities of C5-PTZ dyes with BSA result in greater energy transfer efficiencies (E_T). A dye with a strong electron-withdrawing group present in it has shown better energy accepting capability. A FRET study with dicyanoaniline (DCA) analogs of PTZ and ANT dyes (C5-PTZDCA and ANTDCA, respectively) revealed that E_T depends on electronic and structural factors of molecules. An almost orthogonal geometry between ANT and DCA moieties (∼79°) in ANTDCA induces the greater extent of electron transfer from ANT to DCA, showing a higher E_T for this dye as compared to C5-PTZDCA in which the torsion angle is only ∼38°. Further, the observed facts have been validated by experimentally determined bandgaps (using cyclic voltammetry experiments) for all the dyes. Thus, the hydrophobic character and the presence of interactive substituents along with the electron-accepting abilities majorly control the FRET for such dyes with BSA.

The present study demonstrates binding interactions and Förster resonance energy transfer (FRET) between bovine serum albumin (BSA) and a series of structurally and electronically diverse phenothiazine (PTZ) and anthracene (ANT) dyes.

Clustering-triggered emission of poly(vinyl) alcohol

PVA can emit blue light under UV light and the mechanism of this fluorescence was studied in this paper. PVA can be added to other materials to broaden their properties. The fluorescence of PVA has great application prospects.

Nanomaterials with Supramolecular Assembly Based on AIE Luminogens for Theranostic Applications

One of the major pursuits of biomedical science is to develop advanced strategies for theranostics, which is expected to be an effective approach for achieving the transition from conventional medicine to precision medicine. Supramolecular assembly can serve as a powerful tool in the development of nanotheranostics with accurate imaging of tumors and real-time monitoring of the therapeutic process upon the incorporation of aggregation-induced emission (AIE) ability. AIE luminogens (AIEgens) will not only enable fluorescence imaging but will also aid in improving the efficacy of therapies. Furthermore, the fluorescent signals and therapeutic performance of these nanomaterials can be manipulated precisely owing to the reversible and stimuli-responsive characteristics of the supramolecular systems. Inspired by rapid advances in this field, recent research conducted on nanotheranostics with the AIE effect based on supramolecular assembly is summarized. Here, three representative strategies for supramolecular nanomaterials are presented as follows: a) supramolecular self-assembly of AIEgens, b) the loading of AIEgens within nanocarriers with supramolecular assembly, and c) supramolecular macrocycle-guided assembly via host-guest interactions. Meanwhile, the diverse applications of such nanomaterials in diagnostics and therapeutics have also been discussed in detail. Finally, the challenges of this field are listed in this review.

Efficient FRET Approaches toward Copper(II) and Cyanide Detections via Host-Guest Interactions of Photo-Switchable [2]Pseudo-Rotaxane Polymers Containing Naphthalimide and Merocyanine Moieties

A supramolecular [2]pseudo-rotaxane containing a naphthalimide-based pillararene host and a spiropyran-based imidazole guest was synthesized and investigated in a semiaqueous solution with 90% water fraction. Upon UV exposure, the close-form structure of nonemissive spiropyran guest could be transformed into the open-form structure of red-emissive merocyanine guest reversibly, which was utilized as a monofluorophoric sensor to detect copper(II) and cyanide ions. Moreover, the naphthalimide host as an energy donor with green photoluminescence (PL) emission at 505 nm was complexed with the merocyanine guest as an energy acceptor with red PL emission at 650 nm in 1:1 molar ratio to generate a [2]pseudo-rotaxane polymer, which was further verified by the diffusion coefficients of DOSY nuclear magnetic resonance (NMR) measurements. Due to the Förster resonance energy transfer (FRET) processes, the bifluorophoric [2]pseudo-rotaxane produced more efficient ratiometric PL behavior to induce a stronger red PL emission than that of the monofluorophoric guest; therefore, the PL sensor responses of the supramolecular [2]pseudo-rotaxane toward copper(II) and cyanide ions could be further amplified via the FRET-OFF processes to turn off red PL emission of the reacted merocyanine acceptor and to recover green PL emission of the naphthalimide donor. Accordingly, the best and prominent values of the limit of detection (LOD) for the host-guest detections toward Cu²⁺ and CN^- were 0.53 and 1.34 μM, respectively. The highest red MC emission with the optimum FRET processes of [2]pseudo-rotaxane was maintained around room temperature (20-40 °C) in wide pH conditions (pH = 3-13), which can be utilized in the cell viability tests to prove the nontoxic and remarkable biomarker of [2]pseudo-rotaxane to detect Cu²⁺ and CN^- in living cells. The developed FRET-OFF processes with ratiometric PL behavior of the bifluorophoric supramolecular [2]pseudo-rotaxane polymer will open a new avenue to the future applications of chemo- and biosensors.

Highly Efficient Förster Resonance Energy Transfer Modulations of Dual-AIEgens between a Tetraphenylethylene Donor and a Merocyanine Acceptor in Photo-Switchable [2]Rotaxanes and Reversible Photo-Patterning Applications

A series of novel photo-switchable [2]rotaxanes (i.e., Rot-A-SP and Rot-B-SP before and after shuttling controlled by acid-base, respectively) containing one spiropyran (SP) unit (as a photochromic stopper) on the axle and two tetraphenylethylene (TPE) units on the macrocycle were synthesized via click reaction. Upon UV/visible light exposure, both mono-fluorophoric rotaxanes Rot-A-SP and Rot-B-SP with the closed form (i.e., non-emissive SP unit) could be transformed into the open form (i.e., red-emissive merocyanine (MC) unit) to acquire their respective bi-fluorophoric Rot-A-MC and Rot-B-MC reversibly. The aggregation-induced emission (AIE) properties of bi-fluorophoric TPE combined with MC AIEgens of these designed rotaxanes and mixtures in semi-aqueous solutions induced interesting ratiometric photoluminescence (PL) and Förster resonance energy transfer (FRET) behaviors, which were further investigated and verified by dynamic light scattering (DLS), X-ray diffraction (XRD), and time-resolved photoluminescence (TRPL) measurements along with theoretical studies. Accordingly, in contrast to the model axle (Axle-MC) and the analogous mixture (Mixture-MC, containing the axle and macrocycle components in a 1:1 molar ratio), more efficient FRET behaviors and stronger red PL emissions were obtained from dual-AIEgens between a blue-emissive TPE donor (PL emission at 468 nm) and a red-emissive MC acceptor (PL emission at 668 nm) in both novel photo-switchable [2]rotaxanes Rot-A-MC and Rot-B-MC under various external modulations, including water content, UV/Vis irradiation, pH value, and temperature. Furthermore, the reversible fluorescent photo-patterning applications of Rot-A-SP in a powder form and a solid film with excellent photochromic and fluorescent behaviors are first investigated in this report.

Pillar[5]arene-Based Switched Supramolecular Photosensitizer for Self-Amplified and pH-Activated Photodynamic Therapy

Photodynamic therapy (PDT) has emerged as a promising and spatiotemporally controllable cancer treatment modality. However, serious skin photosensitization during the PDT process limits the clinical application of PDT. Thus, the construction of "smart" and multifunctional photosensitizers has attracted substantial interest. Herein, we develop a mitochondria-targeting and pH-switched hybrid supramolecular photosensitizer by the host-guest interaction. The PDT efficacy of supramolecular photosensitizers can be quenched by the Förster resonance energy transfer (FRET) effect during long circulation and activated by the dissociation of supramolecular photosensitizers in an acidic tumor microenvironment, benefitting from the dynamic feature of the host-guest interaction and pH responsiveness of the water-soluble pillar[5]arene on gold nanoparticles. The rational integration of mitochondria-targeting and reductive glutathione (GSH) elimination in the hybrid switchable supramolecular photosensitizer prolongs the lifetime of reactive oxygen species generated in the PDT near mitochondria and further amplifies the PDT efficacy. Thus, the facile and versatile construction of switchable supramolecular photosensitizer offers not only the targeted and precise phototherapy but also high therapeutic efficacy, which would provide a new path for the clinic application of PDT.

In Situ Monitoring of Mitochondria Regulating Cell Viability by the RNA-Specific Fluorescent Photosensitizer

Cell viability is greatly affected by external stimulus eliciting correlated dynamical physiological processes for cells to choose survival or death. A few fluorescent probes have been designed to detect whether the cell is in survival state or apoptotic state, but monitoring the regulation process of the cell undergoing survival to death remains a long-standing challenge. Herein, we highlight the in situ monitor of mitochondria regulating the cell viability by the RNA-specific fluorescent photosensitizer L. At normal conditions, L anchored mitochondria and interacted with mito-RNA to light up the mitochondria with red fluorescence. With external light stimulus, L generated reactive oxide species (ROS) and cause damage to mitochondria, which activated mitochondrial autophagy to prevent death, during which the red fluorescence of L witnessed dynamical distribution in accordance with the evolution of vacuole structures containing damaged mitochondria into autophagosomes. However, with ROS continuously increasing, the mitochondrial apoptosis was eventually commenced and L with red fluorescent was gradually accumulated in the nucleoli, indicating the programmed cell death. This work demonstrated how the delicate balance between survival and death are regulated by mitochondria.

pH-responsive intramolecular FRET-based self-tracking polymer prodrug nanoparticles for real-time tumor intracellular drug release monitoring and imaging

An intramolecular fluorescence resonance energy transfer (FRET)-based macromolecular theranostic prodrug was designed by directly conjugating Doxorubicin (DOX) as the FRET acceptor onto the naphthalimide side groups in the fluorescent copolymer PPEGMA₂₀-PNAP₈ as the FRET energy donor via an acid-labile imine bond, without a fluorogenic linker. The proposed PPEGMA₂₀-PNAP₈-DOX theranostic prodrug showed a high DOX content of 24.3% owing to a conjugation efficiency of > 93% under mild conjugation conditions. It could easily self-assemble into unique theranostic nanoparticles with a D_h of 71 nm. The theranostic nanoparticles showed excellent pH-triggered DOX release performance with very low premature drug leakage of 6.3% in normal physiological medium over 129 h, while>91% of the conjugated DOX was released in the acidic tumor intracellular microenvironment. MTT assays indicated the enhanced antitumor efficacy of the proposed theranostic nanoparticles compared with free DOX. Furthermore, because drug release was triggered by pH, orange fluorescence was restored to the blue fluorescence of the backbone copolymer. Such self-tracking pH-responsive colorful fluorescence variations during intracellular drug delivery and release are expected to allow real-time tumor intracellular drug release monitoring and imaging diagnosis.

Designing and preparing supramolecular fluorescent probe based on carminic acid and γ-cyclodextrins and studying their application for detection of 2-aminobenzidazole

Supramolecular fluorescent probe, which was designed and modeled from carminic acid (CA) and γ-cyclodextrins (γ-CDs), was initially qualified and stated comprehensively. Fluorescence intensity of CA could be dramatically enhanced ∼850 a.u. through formation of a supramolecular fluorescent probe CA@γ-CDs. The super-probe was verified by geometric conformation and molecular docking, and subsequently characterized by FT-IR, NMR, XRD and fluorescence lifetime. Furthermore, the CA@γ-CDs probe was proved on the detection of fungicide 2-aminobenzidazole (2-BZ). Finally, fluorescence performance of CA and the application of the probe for molecular recognition were both motivated by γ-CDs significantly, which could facilitate the fluorescence detection of CA more extensively and precisely.

Cationic Peptidopolysaccharide with an Intrinsic AIE Effect for Combating Bacteria and Multicolor Imaging

An antibacterial polymer peptidopolysaccharide (COS-AMP) that integrates antibacterial and detection functions is constructed with a simple synthetic method. The COS-AMP is constructed by simulating the structure of peptidoglycan of the bacterial cell wall with chitooligosaccharide with intrinsic aggregation-induced emission (AIE) effect as the main chain, as well as a peptide polymer grafted onto its amino group. Based on the AIE effect and excitation-dependent fluorescence of COS-AMP, it is tentatively applied to multicolor imaging and quantification of bacteria. This multicolor imaging helps to match different excitation sources of fluorescent instrument for straightforward imaging and detection. The structural similarity with the bacterial cell wall component facilitates the passage of COS-AMP across the cell wall and destroys the bacterial structure, thus it has a good broad-spectrum antibacterial activity. In addition, aromatic fluorophores are not needed, and excellent biocompatibility will make it have broad application prospects.

Cationic Organic Nanoaggregates as AIE Luminogens for Wash-Free Imaging of Bacteria and Broad-Spectrum Antimicrobial Application

The increase in the use of bactericides is a matter of grave concern and a serious threat to human health. The present situation demands rapid and efficient detection and elimination of antibiotic-resistant microbes. Herein, we report the synthesis of a simple C₃-symmetric molecular system (TGP) with an intrinsic positive charge through a single-step Schiff base condensation. In a water-dimethyl sulfoxide (DMSO) solvent mixture (80:20 v/v), TGP molecules self-aggregate to form spherical nanoparticles with a positively charged surface that displays efficient fluorescence owing to the aggregation-induced emission (AIE) phenomenon. Both Gram-positive and Gram-negative bacteria could be effectively detected through "turn-off" fluorescence spectroscopy as the electrostatic interaction of the resultant nanoaggregates with the negatively charged bacterial surface induced quenching of fluorescence of the nanoparticles. The fluorescence analysis and steady-state lifetime studies of TGP nanoparticles suggest that a nonradiative decay through photoinduced electron transfer from the nanoparticles to the bacterial surface leads to effective fluorescence quenching. Further, the TGP nanoaggregates demonstrate potent antimicrobial activity against microbes such as multidrug-resistant bacteria and fungi at a concentration as low as 74 μg/mL. A combination of factors including ionic surface characteristics of the nanoparticles for strong electrostatic binding on the bacterial surface followed by possible photoinduced electron transfer from the nanoaggregates to the bacterial membrane and enhanced oxidative stress in the membrane resulting from reactive oxygen species (ROS) generation is found accountable for the high antimicrobial activity of the TGP nanoparticles. The effective disruption of membrane integrity in both Gram-positive and Gram-negative bacteria upon interaction with the nanoaggregates can be observed from field emission scanning electron microscopy (FESEM) studies. The development of simple pathways for the molecular design of multifunctional broad-spectrum antimicrobial systems for rapid and real-time detection, wash-free imaging, and eradication of drug-resistant microbes might be crucial to combat pathogenic agents.