Conductive Self-Healing Nanocomposite Hydrogel Skin Sensors with Antifreezing and Thermoresponsive Properties

Flexible piezoelectric materials and strain sensors for wearable electronics and artificial intelligence applications

With the rapid development of artificial intelligence, the applications of flexible piezoelectric sensors in health monitoring and human-machine interaction have attracted increasing attention. Recent advances in flexible materials and fabrication technologies have promoted practical applications of wearable devices, enabling their assembly in various forms such as ultra-thin films, electronic skins and electronic tattoos. These piezoelectric sensors meet the requirements of high integration, miniaturization and low power consumption, while simultaneously maintaining their unique sensing performance advantages. This review provides a comprehensive overview of cutting-edge research studies on enhanced wearable piezoelectric sensors. Promising piezoelectric polymer materials are highlighted, including polyvinylidene fluoride and conductive hydrogels. Material engineering strategies for improving sensitivity, cycle life, biocompatibility, and processability are summarized and discussed focusing on filler doping, fabrication techniques optimization, and microstructure engineering. Additionally, this review presents representative application cases of smart piezoelectric sensors in health monitoring and human-machine interaction. Finally, critical challenges and promising principles concerning advanced manufacture, biological safety and function integration are discussed to shed light on future directions in the field of piezoelectrics.

A Self-Powered, Skin Adhesive, and Flexible Human-Machine Interface Based on Triboelectric Nanogenerator

Human-machine interactions (HMIs) have penetrated into various academic and industrial fields, such as robotics, virtual reality, and wearable electronics. However, the practical application of most human-machine interfaces faces notable obstacles due to their complex structure and materials, high power consumption, limited effective skin adhesion, and high cost. Herein, we report a self-powered, skin adhesive, and flexible human-machine interface based on a triboelectric nanogenerator (SSFHMI). Characterized by its simple structure and low cost, the SSFHMI can easily convert touch stimuli into a stable electrical signal at the trigger pressure from a finger touch, without requiring an external power supply. A skeleton spacer has been specially designed in order to increase the stability and homogeneity of the output signals of each TENG unit and prevent crosstalk between them. Moreover, we constructed a hydrogel adhesive interface with skin-adhesive properties to adapt to easy wear on complex human body surfaces. By integrating the SSFHMI with a microcontroller, a programmable touch operation platform has been constructed that is capable of multiple interactions. These include medical calling, music media playback, security unlocking, and electronic piano playing. This self-powered, cost-effective SSFHMI holds potential relevance for the next generation of highly integrated and sustainable portable smart electronic products and applications.

Enhancing regenerative medicine with self-healing hydrogels: A solution for tissue repair and advanced cyborganic healthcare devices

Considering the global burden related to tissue and organ injuries or failures, self-healing hydrogels may be an attractive therapeutic alternative for the future. Self-healing hydrogels are highly hydrated 3D structures with the ability to self-heal after breaking, this property is attributable to a variety of dynamic non-covalent and covalent bonds that are able to re-linking within the matrix. Self-healing ability specially benefits minimal invasive medical treatments with cell-delivery support. Moreover, those tissue-engineered self-healing hydrogels network have demonstrated effectiveness for myriad purposes; for instance, they could act as delivery-platforms for different cargos (drugs, growth factors, cells, among others) in tissues such as bone, cartilage, nerve or skin. Besides, self-healing hydrogels have currently found their way into new and novel applications; for example, with the development of the self-healing adhesive hydrogels, by merely aiding surgical closing processes and by providing biomaterial-tissue adhesion. Furthermore, conductive hydrogels permit the stimuli and monitoring of natural electrical signals, which facilitated a better fitting of hydrogels in native tissue or the diagnosis of various health diseases. Lastly, self-healing hydrogels could be part of cyborganics - a merge between biology and machinery - which can pave the way to a finer healthcare devices for diagnostics and precision therapies.

Acryloyl chitosan as a macro-crosslinker for freezing-resistant, self-healing and self-adhesive ionogels-based multicompetent flexible sensors

Here, a polysaccharide derivative acryloyl chitosan (AcCS) is exploited as macro-crosslinker to synthesize a novel ionogel poly (acrylic acid-co-1-Vinyl-3-butyl imidazolium chloride) (AA-IL/AcCS) via a one-pot method. AcCS provides abundant physical and chemical crosslinking sites contributing to the high mechanical stretchability (elongation at break 600 %) and strength (tensile strength 137 kPa) of AA-IL/AcCS. The high-density of dynamic bonds (hydrogen bonds and electrostatic interactions) in the network of ionogels enables self-healing and self-adhesive features of AA-IL/AcCS. Meanwhile, AA-IL/AcCS exhibits high ionic conductivity (0.1 mS/cm) at room temperature and excellent antifreeze ability (-58 °C). The AA-IL/AcCS-based sensor shows diverse sensory capabilities towards temperature and humidity, moreover, it could precisely detect human motions and handwritings signals. Furthermore, AA-IL/AcCS exhibits excellent bactericidal properties against both gram-positive and gram-negative bacteria. This work opens the possibility of polysaccharides as a macro-crosslinkers for preparing ionogel-based sensors for wearable electronics.

Boron nitride microfiber reinforced polyacrylic acid hydrogels with excellent self-adhesion, fast pH response, and strain sensitivity

Hydrogels are widely utilized in the sensor field, but their inadequate adhesion presents a significant obstacle. Herein, a new multifunctional BNMFs/PAA composite hydrogel was prepared via the incorporation of one-dimensional porous boron nitride microfibers (BNMFs) and polyacrylic acid (PAA) hydrogels. BNMFs, as a reinforcing filler, play a very important role in enhancing the properties of the composite hydrogels. In particular, the porous micrometer structure plays a unique role in improving the adhesion properties of PAA hydrogels. The steric hindrance and the rich hydroxyl functional groups coming from BNMFs are key factors for the excellent adhesion of the composite hydrogels. The composite hydrogels show strong adhesion to various substrate materials. For iron plates and biological tissues, the adhesion energy can reach 1377 J m-2 and 317 J m-2, respectively. In addition, the developed BNMFs/PAA composite hydrogels exhibit excellent mechanical properties. The fracture strain of the composite hydrogels is increased by 2.4 times compared to pure PAA hydrogels. The hydrogen bonds formed between BNMFs and PAA are conducive to the mechanical properties of the BNMFs/PAA composite hydrogels. Meanwhile, BNMFs as fillers play a role in carrying and dissipating force. Furthermore, the BNMFs/PAA composite hydrogels have excellent strain and pH response characteristics. This is because the crosslinking network of the composite hydrogels becomes loose after the addition of BNMFs, resulting in rapid ion transport pathways. Therefore, the developed BNMFs/PAA composite hydrogels will have broad application prospects in the fields of motion monitoring, intelligent skin and biological adhesives.

From Fluorescence-Transfer-Lightening-Printing-Assisted Conductive Adhesive Nanocomposite Hydrogels toward Wearable Interactive Optical Information-Electronic Strain Sensors

The interactive flexible device, which monitors the human motion in optical and electrical synergistic modes, has attracted growing attention recently. The incorporation of information attribute within the optical signal is deemed advantageous for improving the interactive efficiency. Therefore, the development of wearable optical information-electronic strain sensors holds substantial promise, but integrating and synergizing various functions and realizing strain-mediated information transformation keep challenging. Herein, an amylopectin (AP) modified nanoclay/polyacrylamide-based nanocomposite (NC) hydrogel and an aggregation-induced-emission-active ink are fabricated. Through the fluorescence-transfer printing of the ink onto the hydrogel film in different strains with nested multiple symbolic information, a wearable interactive fluorescent information-electronic strain sensor is developed. In the sensor, the nanoclay plays a synergistic "one-stone-three-birds" role, contributing to "lightening" fluorescence (≈80 times emission intensity enhancement), ionic conductivity, and excellent stretchability (>1000%). The sensor has high biocompatibility, resilience (elastic recovery ratio: 97.8%), and strain sensitivity (gauge factor (GF): 10.9). Additionally, the AP endows the sensor with skin adhesiveness. The sensor can achieve electrical monitoring of human joint movements while displaying interactive fluorescent information transformation. This research poses an efficient strategy to develop multifunctional materials and provides a general platform for achieving next-generation interactive devices with prospective applications in wearable devices, human-machine interfaces, and artificial intelligence.

Transparent, super stretchable, freezing-tolerant, self-healing ionic conductive cellulose based eutectogel for multi-functional sensors

In this study, we propose a non - toxic and low-cost fabrication of cellulose-based eutectogel through the ZnCl2/H2O/H3PO4 deep eutectic solvent (DES) to dissolve cellulose followed by free-radical polymerization of acrylamide. Particularly, the introduction of cellulose enhances the mechanical properties of eutectogels while eliminating the environmental concerns of the traditional nanocellulose fabrication process. Owing to the dynamic transfer of ions in the eutectogel network, the prepared eutectogels exhibit adjustable conductivity (0.9- 1.37 Sm-1, 15 °C) and stretching sensitivity (Gauge factor = 5.4). The resulting DES - cellulose-based eutectogels (DCEs) exhibited ultra stretchability (4086 %), high toughness (261.3 MJ/m3), excellent ionic conductivity (1.64 Sm-1, 20 °C), high transparency (>85 %), outstanding antifreezing performance (<-80 °C), and other comprehensive characteristics. The DCEs had been proven to have multiple sensitivities to external stimuli, like temperature, strain, and pressure. As a result, the DCEs can be assembled into multifunctional sensors. Moreover, this work also demonstrated the satisfactory performance of DCEs in flexible electroluminescent devices. The low cost and high efficiency made the preparation method of this experiment an efficient strategy for developing high-performance cellulose-based eutectogels, which would greatly promote the application of such materials in areas such as artificial skin for soft robots and other wearable devices.

Self-Healing Hydrogel Bioelectronics

Hydrogels have emerged as powerful building blocks to develop various soft bioelectronics because of their tissue-like mechanical properties, superior bio-compatibility, the ability to conduct both electrons and ions, and multiple stimuli-responsiveness. However, hydrogels are vulnerable to mechanical damage, which limits their usage in developing durable hydrogel-based bioelectronics. Self-healing hydrogels aim to endow bioelectronics with the property of repairing specific functions after mechanical failure, thus improving their durability, reliability, and longevity. This review discusses recent advances in self-healing hydrogels, from the self-healing mechanisms, material chemistry, and strategies for multiple properties improvement of hydrogel materials, to the design, fabrication, and applications of various hydrogel-based bioelectronics, including wearable physical and biochemical sensors, supercapacitors, flexible display devices, triboelectric nanogenerators (TENGs), implantable bioelectronics, etc. Furthermore, the persisting challenges hampering the development of self-healing hydrogel bioelectronics and their prospects are proposed. This review is expected to expedite the research and applications of self-healing hydrogels for various self-healing bioelectronics.

Polymerizable deep eutectic solvent treated lignocellulose: Green strategy for synergetic production of tough strain sensing elastomers and nanocellulose

Liquid free ion-conductive elastomers (ICEs) have demonstrated promising potential in various advanced application scenarios including sensor, artificial skin, and human-machine interface. However, ICEs that synchronously possess toughness, adhesiveness, stability, and anti-bacterial capability are still difficult to achieve yet highly demanded. Here, a one-pot green and sustainable strategy was proposed to fabricate multifunctional ICEs by extracting non-cellulose components (mainly lignin and hemicellulose) from lignocellulose with polymerizable deep eutectic solvents (PDES) and the subsequent in-situ photo-polymerization process. Ascribing to the uniform dispersion of non-cellulose components in PDES, the resultant ICEs demonstrated promising mechanical strength (a tensile strength of ~1200 kPa), high toughness (~9.1 MJ m-3), favorable adhesion (a lap-shear strength up to ~61.5 kPa toward metal), conducive stabilities, and anti-bacterial capabilities. With the help of such advantages, the ICEs exhibited sensitive (a gauge factor of ~23.5) and stable (~4000 cycles) performances in human motion and physiological signal detection even under sub-zero temperatures (e.g., -20 °C). Besides, the residue cellulose can be mechanically isolated into nanoscale fibers, which matched the idea of green chemistry.

Multifunctional Nanoclay-Based Hemostatic Materials for Wound Healing: A Review

Bleeding to death accounts for around 30-40% of all trauma-related fatalities. Current hemostatic materials are mainly mono-functional or have insufficient hemostatic capacity. Nanoclay has been recently shown to accelerate hemostasis, improve wound healing, and provide the resulting multifunctional hemostatic materials antibacterial, anti-inflammatory, and healing-promoting due to its distinctive morphological structure and physicochemical properties. Herein, the chemical design and action mechanism of nanoclay-based hemostatic, antibacterial, and pro-wound healing materials in the context of wound healing are discussed. The physiological processes of hemostasis and wound healing to elucidate the significance of nanoclay for functional wound hemostatic dressing design are outlined. A summary of the features of various nanoclay and product types used in wound hemostatic dressings is provided. Nanoclay can be antimicrobial due to the slow release of metal ions and has an abundant surface charge allowing for high affinity for proteins and cells, which can activate the coagulation reaction or facilitate tissue repair. Nanoclay with a microporous structure can be used as drug carriers to create composites critical for inhibiting bacterial growth on wounds or promoting the regeneration of vascular, muscle, and skin tissues. Directions for further research and innovation of nanoclay-based multifunctional materials for hemostasis and tissue regeneration are explored.

Using chitosan nanofibers to simultaneously improve the toughness and sensing performance of chitosan-based ionic conductive hydrogels

Conductive hydrogels, especially polysaccharide-based ionic conductive hydrogels, have received increasing interest in the field of wearable sensors due to their similarity to human skin. Nevertheless, it is still a challenging task to simultaneously prepare a self-healed and adhesive conductive hydrogel with good toughness, temperature tolerance and high sensing performance, especially with high sensitivity and a low detection limit. Herein, we developed a new strategy to improve the toughness and sensing performance of a multifunctional conductive hydrogel by simultaneously using dissolved chitosan (CS) and solid chitosan nanofibers (CSFs) to induce the formation of hierarchical polymeric networks in the hydrogel. The tensile strength and elongation at break of the hydrogel could be improved from 70.3 kPa and 1005 % to 173.9 kPa and 1477 %, respectively, simply by introducing CSFs to the hydrogel, and its self-healing, adhesive and antibacterial properties were effectively retained. When serving as a resistive sensing material, the introduction of CSFs increased the gauge factor of the hydrogel-based strain sensor from 8.25 to 14.27. Moreover, the hydrogel-based strain sensor showed an ultralow detection limit of 0.2 %, excellent durability and stability (1000 cycles) and could be used to detect various human activities. In addition, the hydrogel prepared by using a water-glycerol binary solvent system showed temperature-tolerant performance and possessed adequate sensitivity when serving as a resistive sensing material. Therefore, this work provides a new way to prepare multifunctional conductive hydrogels with good toughness, sensing performance and temperature tolerance to expand the application range of hydrogel-based strain sensors.

TEMPO bacterial cellulose and MXene nanosheets synergistically promote tough hydrogels for intelligent wearable human-machine interaction

Conductive hydrogels have received increasing attention in the field of wearable electronics, but they also face many challenges such as temperature tolerance, biocompatibility, and stability of mechanical properties. In this paper, a double network hydrogel of MXene/TEMPO bacterial cellulose (TOBC) system is proposed. Through solvent replacement, the hydrogel exhibits wide temperature tolerance (-20-60 °C) and stable mechanical properties. A large number of hydrogen bonds, MXene/TOBC dynamic three-dimensional network system, and micellar interactions endow the hydrogel with excellent mechanical properties (elongation at break ~2800 %, strength at break ~420 kPa) and self-healing ability. The introduction of tannic acid prevents the oxidation of MXene and the loss of electrical properties of the hydrogel. In addition, the sensor can also quickly (74 ms) and sensitive (gauge factor = 15.65) wirelessly monitor human motion, and the biocompatibility can well avoid the stimulation when it comes into contact with the human body. This series of research work reveals the fabrication of MXene-like flexible wearable electronic devices based on self-healing, good cell compatibility, high sensitivity, wide temperature tolerance and durability, which can be used in smart wearable, wireless monitoring, human-machine Interaction and other aspects show great application potential.

Using chitosan nanofibers to synergistically construct a highly stretchable multi-functional liquid mental-based hydrogel for assembling strain sensor with high sensitivity and broad working range

Liquid metal (LM) microdroplets have garnered significant interest as conductive materials for initiating free radical polymerization in the development of conductive hydrogels suited for strain sensors. However, crafting multi-functional conductive hydrogels that boast both high stretchability and superior sensing capabilities remains as a challenge. In this study, we have successfully synthesized LM-based conductive hydrogels characterized by remarkable stretchability and sensing performance employing acrylic acid (AA) to evenly distribute chitosan nanofibers (CSFs) and to subsequently catalyze the free radical polymerization of AA. The resultant polymer network was crosslinked within situ polyacrylic acid (PAA), facilitated by Ga3+ in conjunction with guar gum (GG)-stabilized Ga droplets. The strategic interplay between the rigid, and protonated CSFs and the pliable PAA matrix, coupled with the ionic crosslinking of Ga3+, endows the resulting GG-Ga-CSF-PAA hydrogel with high stretchability (3700 %), ultrafast self-healing, robust moldability, and strong adhesiveness. When deployed as a strain sensing material, this hydrogel exhibits a high gauge factor (38.8), a minimal detection threshold, enduring durability, and a broad operational range. This versatility enables the hydrogel-based strain sensor to monitor a wide spectrum of human motions. Remarkably, the hydrogel maintains its stretchability and sensing efficacy under extreme temperatures after a simple glycerol solution treatment.

Generating dual structurally and functionally skin-mimicking hydrogels by crosslinking cell-membrane compartments

The skin is intrinsically a cell-membrane-compartmentalized hydrogel with high mechanical strength, potent antimicrobial ability, and robust immunological competence, which provide multiple protective effects to the body. Methods capable of preparing hydrogels that can simultaneously mimic the structure and function of the skin are highly desirable but have been proven to be a challenge. Here, dual structurally and functionally skin-mimicking hydrogels are generated by crosslinking cell-membrane compartments. The crosslinked network is formed via free radical polymerization using olefinic double bond-functionalized extracellular vesicles as a crosslinker. Due to the dissipation of stretching energy mediated by vesicular deformation, the obtained compartment-crosslinked network shows enhanced mechanical strength compared to hydrogels crosslinked by regular divinyl monomers. Biomimetic hydrogels also exhibit specific antibacterial activity and adequate ability to promote the maturation and activation of dendritic cells given the existence of numerous extracellular vesicle-associated bioactive substances. In addition, the versatility of this approach to tune both the structure and function of the resulting hydrogels is demonstrated through introducing a second network by catalyst-free click reaction-mediated crosslinking between alkyne-double-ended polymers and azido-decorated extracellular vesicles. This study provides a platform to develop dual structure- and function-controllable skin-inspired biomaterials.

Multifunctional Conductive Double-Network Hydrogel Sensors for Multiscale Motion Detection and Temperature Monitoring

As typical soft materials, hydrogels have demonstrated great potential for the fabrication of flexible sensors due to their highly compatible elastic modulus with human skin, prominent flexibility, and biocompatible three-dimensional network structure. However, the practical application of wearable hydrogel sensors is significantly constrained because of weak adhesion, limited stretchability, and poor self-healing properties of traditional hydrogels. Herein, a multifunctional sodium hyaluronate (SH)/borax (B)/gelatin (G) double-cross-linked conductive hydrogel (SBG) was designed and constructed through a simple one-pot blending strategy with SH and gelatin as the gel matrix and borax as the dynamic cross-linker. The obtained SBG hydrogels exhibited a moderate tensile strength of 25.3 kPa at a large elongation of 760%, high interfacial toughness (106.5 kJ m-3), strong adhesion (28 kPa to paper), and satisfactory conductivity (224.5 mS/m). In particular, the dynamic cross-linking between SH, gelatin, and borax via borate ester bonds and hydrogen bonds between SH and gelatin chain endowed the SBG hydrogels with good fatigue resistance (>300 cycles), rapid self-healing performance (HE (healing efficiency) ∼97.03%), and excellent repeatable adhesion. The flexible wearable sensor assembled with SBG hydrogels demonstrated desirable strain sensing performance with a competitive gauge factor and exceptional stability, which enabled it to detect and distinguish various multiscale human motions and physiological signals. Furthermore, the flexible sensor is capable of precisely perceiving temperature variation with a high thermal sensitivity (1.685% °C-1). As a result, the wearable sensor displayed dual sensory performance for temperature and strain deformation. It is envisioned that the integration of strain sensors and thermal sensors provide a novel and convenient strategy for the next generation of multisensory wearable electronics and lay a solid foundation for their application in electronic skin and soft actuators.

Strong and Tough Antifreezing Hydrogel Sensor via the Synergy of Coordination and Hydrogen Bonds

Hydrogel sensors are fascinating as flexible sensors and electronic skin due to their excellent biocompatibility and structure controllability. However, developing conductive hydrogels possessing both excellent mechanical and antifreezing properties for environmental-adaptive sensors remains a challenge. Herein, a strategy of combining betaine and metal ions to construct poly(acrylic acid) (PAA)-based high-conductive hydrogels has been reported. PAA-Al3+/betaine hydrogels with high toughness and antifreezing property were prepared by a one-step UV curing method. Their high toughness is attributed to the coordination of metal ions with the carboxylic groups in PAA, the interaction of betaine with PAA, and the formation of hydrogen bonds between them and water molecules. Moreover, the significant antifreezing property is due to the reduction of free water in the hydrogel. This, in turn, is attributed to the hydration of metal ions and the synergistic hydrogen bonding between betaine and water. The experiments demonstrate that the hydrogel has excellent mechanical property, high conductivity, superior transparency, antiswelling property, antipuncture as well as shape memory properties, and especially, low cytotoxicity. It can be used as a sensor for motion detection and information recognition. This work provides new insights into the application of flexible sensors and human-machine interfaces in multienvironmental conditions.

3D Printable Organohydrogel with Long-Lasting Moisture and Extreme-Temperature Tolerance for Flexible Electronics

Hydrogels with high electrical conductivity and mechanical stretchability are promising materials for flexible electronics. However, traditional hydrogels are applied in short-term usage at room temperature or low temperature due to their poor water-retention ability and freezing-tolerance property. Here, a dually cross-linked glycerol-organohydrogel (GL-organohydrogel) based on GL and acrylic acid was synthesized in a GL-water binary solvent. Fe3+ ions working as an electrolyte were added to improve the conductivity of the organohydrogel and form coordination interactions between Fe3+ ions and carboxyl groups of acrylic acid. The strong hydrogen bonding between GL and water molecules firmly lock water in the organohydrogel network, thereby endowing the GL-organohydrogel with the antifreezing property, long-term stability, and moisture lock-in capability. Our organohydrogel could endure extremely low temperature (-80 °C) over 30 days without freezing and retain its water content (almost 100% of its initial state) after being stored at room temperature (25 °C, 54% humidity) for 30 days. It also demonstrated desired stretchable properties, conductivity, three-dimensional (3D) printability, and self-healing ability. A wearable data glove was constructed by using the GL-organohydrogel and digital light processing technology. This work opens a new avenue for developing hydrogels with long-term stability, moisture lock-in capability, and extreme-temperature tolerance for stretchable electronics.

Initiator-Free Photocuring 3D-Printable PVA-Based Hydrogel with Tunable Mechanical Properties and Cell Compatibility

Poly(vinyl alcohol) (PVA)-based hydrogels have attracted great attention and been widely used in biological tissue engineering. With the development of modern medicine, precision medicine requires the customization of medical materials. However, lacking of photocurable functional groups or the performance of rapid phase transition makes PVA-based hydrogels difficult to be customizable molded through photocuring 3D printing technique. In this research, customizable PVA-based hydrogels with high performance through 3D photocurable printing and freezing-thawing (F-T) process are obtained. The ability of 3D-printable is endowed by the introduction of polyvinyl alcohol-styrylpyridine (PVA-SBQ), which can be photo-crosslinked quickly without photoinitiator. Meanwhile, the tunable mechanical properties are achieved by adjusting the mass ratio of PVA-SBQ to PVA, and PVA can offer the physical crosslinking points through freezing-thawing (F-T) process. The hydrogels with high resolution are prepared by digital light procession 3D printing with the mass ratio 1:1 of PVA-SBQ to PVA solution. Attributed to the absence of initiator, and no small molecule residues inside the hydrogels, the hydrogels have good biocompatibility and have the potential to be applicated in the field of biological tissue engineering.

Self-Healable, Adhesive, Anti-Drying, Freezing-Tolerant, and Transparent Conductive Organohydrogel as Flexible Strain Sensor, Triboelectric Nanogenerator, and Skin Barrier

Conductive hydrogels have attracted tremendous interest in the construction of flexible strain sensors and triboelectric nanogenerators (TENGs) owing to their good stretchability and adjustable properties. Nevertheless, how to simultaneously achieve high transparency, self-healing, adhesion, antibacterial, anti-freezing, anti-drying, and biocompatibility properties through a simple method remains a challenge. Herein, a transparent, freezing-tolerant, and multifunctional organohydrogel (PAOAM-PDO) as electrode for strain sensors and TENGs was constructed through a free radical polymerization in the 1,3-propanediol (PDO)/water binary solvent system, in which oxide sodium alginate, aminated gelatin, acrylic acid, and AlCl3 were used as raw materials. The obtained PAOAM-PDO exhibited good transparency (>90%), self-healing, adhesiveness, antibacterial property, good conductivity (1.13 S/m), and long-term environmental stability. The introduction of PDO endowed PAOAM-PDO with freezing resistance with a low freezing point of -60 °C, and PAOAM-PDO could serve as a protective skin barrier to prevent frostbite at low temperature. PAOAM-PDO could be assembled as strain sensors to monitor heterogeneous human movements with high strain sensitivity (gauge factor of 7.05, strain = 233%). Meanwhile, PAOAM-PDO could be further fabricated as a TENG with a "sandwich" structure in single electrode mode. Moreover, the resulting TENG achieved electrical outputs with simple hand tapping and served as a self-powered device to light light-emitting diodes. This work displays a feasible strategy to build environment-tolerant and multifunctional organohydrogels, which possess potential applications in the wearable electronics and self-powered devices.

Construction of Wearable Touch Sensors by Mimicking the Properties of Materials and Structures in Nature

Wearable touch sensors, which can convert force or pressure signals into quantitative electronic signals, have emerged as essential smart sensing devices and play an important role in various cutting-edge fields, including wearable health monitoring, soft robots, electronic skin, artificial prosthetics, AR/VR, and the Internet of Things. Flexible touch sensors have made significant advancements, while the construction of novel touch sensors by mimicking the unique properties of biological materials and biogenetic structures always remains a hot research topic and significant technological pathway. This review provides a comprehensive summary of the research status of wearable touch sensors constructed by imitating the material and structural characteristics in nature and summarizes the scientific challenges and development tendencies of this aspect. First, the research status for constructing flexible touch sensors based on biomimetic materials is summarized, including hydrogel materials, self-healing materials, and other bio-inspired or biomimetic materials with extraordinary properties. Then, the design and fabrication of flexible touch sensors based on bionic structures for performance enhancement are fully discussed. These bionic structures include special structures in plants, special structures in insects/animals, and special structures in the human body. Moreover, a summary of the current issues and future prospects for developing wearable sensors based on bio-inspired materials and structures is discussed.

Physical crosslinked hydrogel-derived smart windows: anti-freezing and fast thermal responsive performance

Thermochromic hydrogels are versatile smart materials that have many applications, including in smart windows, sensing, camouflage, etc. The previous reports of hydrogel smart windows have been based on covalent crosslinking, requiring multistep processing, and complicated preparation. Moreover, most research studies focused on enhancing the luminous transmittance (T_lum) and modulating ability (ΔT_sol), while the structural integrity and antifreezing ability, which are essential in practical applications, have been compromised and rarely investigated. Herein, we develop a new physical (noncovalent crosslinked) hydrogel-derived smart window by introducing an in situ free radical polymerization (FRP) of N-isopropylacrylamide (NIPAM) in a glycerol-water (GW) binary solvent system. The noncovalent crosslinked PNIPAM GW solutions are facilely synthesized, giving outstanding freezing tolerance (∼-18 °C), a comparably high T_lum of 90%, and ΔT_sol of 60.8%, together with added advantages of fast response time (∼10 s) and good structural integrity before and after phase transition. This work could provide a new strategy to design and fabricate heat stimulated smart hydrogels not limited to energy saving smart windows.

Functionalized Hydrogel-Based Wearable Gas and Humidity Sensors

Breathing is an inherent human activity; however, the composition of the air we inhale and gas exhale remains unknown to us. To address this, wearable vapor sensors can help people monitor air composition in real time to avoid underlying risks, and for the early detection and treatment of diseases for home healthcare. Hydrogels with three-dimensional polymer networks and large amounts of water molecules are naturally flexible and stretchable. Functionalized hydrogels are intrinsically conductive, self-healing, self-adhesive, biocompatible, and room-temperature sensitive. Compared with traditional rigid vapor sensors, hydrogel-based gas and humidity sensors can directly fit human skin or clothing, and are more suitable for real-time monitoring of personal health and safety. In this review, current studies on hydrogel-based vapor sensors are investigated. The required properties and optimization methods of wearable hydrogel-based sensors are introduced. Subsequently, existing reports on the response mechanisms of hydrogel-based gas and humidity sensors are summarized. Related works on hydrogel-based vapor sensors for their application in personal health and safety monitoring are presented. Moreover, the potential of hydrogels in the field of vapor sensing is elucidated. Finally, the current research status, challenges, and future trends of hydrogel gas/humidity sensing are discussed.

Environmentally adaptive polysaccharide-based hydrogels and their applications in extreme conditions: A review

Polysaccharide hydrogels are one of the most promising hydrogel materials due to their inherent characteristics, including biocompatibility, biodegradability, renewability, and easy modification, and their structure and functional designs have been widely researched to adapt to different application scenarios as well as to broaden their application fields. As typical wet-soft materials, the high water content and water-absorbing ability of polysaccharide-based hydrogels (PHs) are conducive to their wide biomedical applications, such as wound healing, tissue repair, and drug delivery. In addition, along with technological progress, PHs have shown potential application prospects in some high-tech fields, including human-computer interaction, intelligent driving, smart dressing, flexible sensors, etc. However, in practical applications, due to the poor ability of PHs to resist freezing below zero, dehydration at high temperature, and acid-base/swelling-induced deformation in a solution environment, they are prone to lose their wet-soft peculiarities, including structural integrity, injectability, flexibility, transparency, conductivity and other inherent characteristics, which greatly limit their high-tech applications. Hence, reducing their freezing point, enhancing their high-temperature dehydration resistance, and improving their extreme solution tolerance are powerful approaches to endow PHs with multienvironmental adaptability, broadening their application areas. This report systematically reviews the study advances of environmentally adaptive polysaccharide-based hydrogels (EAPHs), comprising anti-icing hydrogels, high temperature/dehydration resistant hydrogels, and acid/base/swelling deformation resistant hydrogels in recent years. First, the construction methods of EAPHs are presented, and the mechanisms and properties of freeze-resistant, high temperature/dehydration-resistant, and acid/base/swelling deformation-resistant adaptations are simply demonstrated. Meanwhile, the features of different strategies to prepare EAPHs as well as the strategies of simultaneously attaining multienvironmental adaptability are reviewed. Then, the applications of extreme EAPHs are summarized, and some meaningful works are well introduced. Finally, the issues and future outlooks of PH environment adaptation research are elucidated.

Carboxymethylcellulose reinforced, double-network hydrogel-based strain sensor with superior sensing stability for long-term monitoring

Hydrogel-based strain sensors have garnered significant attention for their potential for human health monitoring. However, its practical application has been hindered by water loss, freezing, and structural impairment during long-term motion monitoring. Here, a strain sensor based on double-network (DN) hydrogel of polyacrylamide (PAAm)/carboxymethylcellulose (CMC) was developed in a ternary solvent system of lithium chloride (LiCl)/ethylene glycol (EG)/H₂O through a facile one-pot radical polymerization strategy. The incorporation of EG effectively mitigated the hydration of lithium salts by generating stable ion clusters with Li⁺ and stronger hydrogen bonds within the polymer matrix. The sensor demonstrated excellent mechanical properties, including a stretchability of 1858 %, toughness of 1.80 MJ/m³, and recoverability of 102 %. Furthermore, the LiCl/EG/H₂O ternary system resulted in high conductivity, excellent anti-freezing performance, and superior sensing stability. In addition, the sensor exhibited remarkable sensitivity, enabling the monitoring of human movements ranging from subtle to significant deformations, including throat motion and bending of the elbow, wrist, finger, and lower limb. This study presents a viable approach for constructing hydrogel-based strain sensors with exceptional sensing stability for long-term tracking of human motions.

Ultrastretchable, Multihealable, and Highly Sensitive Strain Sensor Based on a Double Cross-Linked MXene Hydrogel

The ability of a flexible strain sensor to directly adapt the complicated human biological motion or combined gestures and remotely control the artificial intelligence robotics could benefit the wearable electronics such as intelligent robotics and patient healthcare. However, it is a challenge for the flexible strain sensor to simultaneously achieve high sensing performances and stretchability and long sustainability under various deformation stress or damage. Herein, a dual-cross-linked poly(acrylic acid-stearyl methacrylate)/MXene [P(AA-SMA)M] hydrogel with enhanced mechanical stretchability and self-healability is fabricated by importing reversible coordination and hydrophobic interaction into polymer networks. As a result, the hydrogel film not only exhibits high tensile strength (525 kPa) and stretchability (∼2600%) but also achieves repetitive healable property with 843% elongation even after the 20th broken/self-healing cycle. More importantly, the resultant strain sensor delivers a low detection limit, wide sensing range, fast response time, and repeatability of 1000 cycles even after repeated self-healing. So, the sensor can monitor subtle human motions and recognize different handwriting and gestures, which reveals potential applications toward health-care devices, flexible electronics, and human-machine interfacing.

Mussel-inspired lignin decorated cellulose nanocomposite tough organohydrogel sensor with conductive, transparent, strain-sensitive and durable properties

A novel gel-based wearable sensor with environment resistance (anti-freezing and anti-drying), excellent strength, high sensitivity and self-adhesion was prepared by introducing biomass materials including both lignin and cellulose. The introduction of lignin decorated CNC (L-CNC) to the polymer network acted as nano-fillers to improve the gel's mechanical with high tensile strength (72 KPa at 25 °C, 77 KPa at -20 °C), excellent stretchability (803 % at 25 °C, 722 % at -20 °C). The abundant catechol groups formed in the process of dynamic redox reaction between lignin and ammonium persulfate endowed the gel with robust tissue adhesiveness. Impressively, the gel exhibited outstanding environment resistance, which could be stored for a long time (>60 days) in an open-air environment with a wide work temperature range (-36.5 °C-25 °C). Based on these significant properties, the integrated wearable gel sensor showed superior sensitivity (gauge factor = 3.11 at 25 °C and 2.01 at -20 °C) and could detect human activities with excellent accuracy and stability. It is expected that this work will provide a promising platform for fabricating and application of a high-sensitive strain conductive gel with long-term usage and stability.

Nanosheet-hydrogel composites: from preparation and fundamental properties to their promising applications

Hydrogels are an important class of soft materials with elastic and intelligent properties. Nevertheless, these traditional hydrogels usually possess poor mechanical properties and limited functions, which greatly restrict their further applications. With the rapid development of nanotechnology, there have been significant advances in the design and fabrication of functional nanocomposite hydrogels with unique properties and functions. Among various materials, nanosheets with planar topography, large specific surface areas, and versatile physicochemical properties have attracted intense research interest. Herein, this review summarises the synthesis mechanisms, fundamental properties, and promising applications of nanosheet-incorporated hydrogels. In particular, how the nanosheet structure is applied to improve the overall performance of the hydrogel in each application is emphasized. Additionally, the current challenges and prospects are briefly discussed in this area. We expect that the combination of nanosheets and hydrogels can attract more researchers' interest and bring new opportunities in the future.

Self-strengthening stimuli-responsive nanocomposite hydrogels

Stimuli-responsive hydrogels with self-strengthening properties are promising for the use of autonomous growth and adaptation systems to the surrounding environments by mimicking biological materials. However, conventional stimuli-responsive hydrogels require structural destruction to initiate mechanochemical reactions to grow new polymeric networks and strengthen themselves. Here we report continuous self-strengthening of a nanocomposite hydrogel composed of poly(N-isopropylacrylamide) (PNIPAM) and nanoclay (NC) by using external stimuli such as heat and ionic strength. The internal structures of the NC-PNIPAM hydrogel are rearranged through the swelling-deswelling cycles or immersing in a salt solution, thus its mechanical properties are significantly improved. The effects of concentration of NC in hydrogels, number of swelling-deswelling cycles, and presence of salt in the surrounding environment on the mechanical properties of hydrogels are characterized by nanoindentation and tensile tests. The self-strengthening mechanical performance of the hydrogels is demonstrated by the loading ability. This work may offer promise for applications such as artificial muscles and soft robotics.

Significant Roles of Ions in Enhancing and Functionalizing Anisotropic Hydrogels

Salt ions are multifunctional in living beings, in contrast to their limited efficiency in abiotic materials. Achieving the versatility of salt ions in synthetic materials is promising yet demanding. Here, we report that multivalent metallic ions can act multiple crucial roles in a polyacrylamide/sodium alginate (PAAm/SA) composite hydrogel system, inducing a quadruple effect that toughens and functionalizes the originally weak gel. Fixation of anisotropic structures (effect I), mechanical enhancement (effect II), conductivity improvement (effect III), as well as antifreezing and moisture retention properties (effect IV) simultaneously emerge in the gel, all of which are enabled by the ion effect. The resulting tough hydrogels exhibit excellent comprehensive properties that rival existing state-of-the-art hydrogels, promising a wide range of potential applications. As proof-of-concept demonstrations, extremely durable hydrogel-based soft electronic devices are developed, which operate stably even in harsh environments. We also prove that the ion effect can be induced by other multivalent metallic ions. This work highlights the versatility of salt ions in nonliving materials, providing a simple but enlightening idea for the development of all-around soft materials.

Elastomeric Liquid-Free Conductor for Iontronic Devices

For a long time, the potential application of gel-based ionic devices was limited by the problem of liquid leakage or evaporation. Here, we utilized amorphous, irreversible and reversible cross-linked polyTA (PTA) as a matrix and lithium bis(trifluoromethane sulfonamide) (LiTFSI) as an electrolyte to prepare a stretchable (495%) and self-healing (94%) solvent-free elastomeric ionic conductor. The liquid-free ionic elastomer can be used as a stable strain sensor to monitor human activities sensitively under extreme temperatures. Moreover, the prepared elastic conductor (TEOA_0.10-PTA@LiTFSI) was also considered an electrode to assemble with self-designed repairable dielectric organosilicon layers (RD-PDMS) to develop a sustainable triboelectric nanogenerator (SU-TENG) with outstanding performance. SU-TENG maintained good working ability under extreme conditions (-20 °C, 60 °C, and 200% strain). This work provided a low-cost and simple idea for the development of reliable iontronic equipment for human-computer interaction, motion sensing, and sustainable energy.

Construction and Ion Transport-Related Applications of the Hydrogel-Based Membrane with 3D Nanochannels

Hydrogel is a type of crosslinked three-dimensional polymer network structure gel. It can swell and hold a large amount of water but does not dissolve. It is an excellent membrane material for ion transportation. As transport channels, the chemical structure of hydrogel can be regulated by molecular design, and its three-dimensional structure can be controlled according to the degree of crosslinking. In this review, our prime focus has been on ion transport-related applications based on hydrogel materials. We have briefly elaborated the origin and source of hydrogel materials and summarized the crosslinking mechanisms involved in matrix network construction and the different spatial network structures. Hydrogel structure and the remarkable performance features such as microporosity, ion carrying capability, water holding capacity, and responsiveness to stimuli such as pH, light, temperature, electricity, and magnetic field are discussed. Moreover, emphasis has been made on the application of hydrogels in water purification, energy storage, sensing, and salinity gradient energy conversion. Finally, the prospects and challenges related to hydrogel fabrication and applications are summarized.

Anti-Freezing Nanocomposite Organohydrogels with High Strength and Toughness

Hydrogels based on nanocomposites (NC) structure have acquired a great deal of interest, but they are still limited by relatively low mechanical strength, inevitably losing elasticity when applied below subzero temperatures, due to the formation of ice crystallization. In this study, an anti-freezing and mechanically strong Laponite NC organohydrogel was prepared by a direct solvent replacement strategy of immersing Laponite NC pre-hydrogel into ethylene glycol (EG)/water mixture solution. In the organohydrogel, a part of water molecules was replaced by EG, which inhibited the formation of ice crystallization even at extremely low temperatures. In addition, the formation of hydrogen bonds between Laponite and the monomers of N-isopropylacrylamide (NIPAM) and hydroxyethyl acrylate (HEA) endowed the organohydrogels with high mechanical strength and toughness. The NC organohydrogel can maintain its mechanical flexibility even at −25 °C. The compressive stress, tensile stress, and elongation at the break of N₅H₅L reached 3871.71 kPa, 137.05 kPa, and 173.39%, respectively, which may be potentially applied as ocean probes in low temperature environment.

Probing and Manipulating Noncovalent Interactions in Functional Polymeric Systems

Noncovalent interactions, which usually feature tunable strength, reversibility, and environmental adaptability, have been recognized as driving forces in a variety of biological and chemical processes, contributing to the recognition between molecules, the formation of molecule clusters, and the establishment of complex structures of macromolecules. The marriage of noncovalent interactions and conventional covalent polymers offers the systems novel mechanical, physicochemical, and biological properties, which are highly dependent on the binding mechanisms of the noncovalent interactions that can be illuminated via quantification. This review systematically discusses the nanomechanical characterization of typical noncovalent interactions in polymeric systems, mainly through direct force measurements at microscopic, nanoscopic, and molecular levels, which provide quantitative information (e.g., ranges, strengths, and dynamics) on the binding behaviors. The fundamental understandings of intermolecular and interfacial interactions are then correlated to the macroscopic performances of a series of noncovalently bonded polymers, whose functions (e.g., stimuli-responsiveness, self-healing capacity, universal adhesiveness) can be customized through the manipulation of the noncovalent interactions, providing insights into the rational design of advanced materials with applications in biomedical, energy, environmental, and other engineering fields.

Nanocomposite hydrogels for biomedical applications

Nanomaterials' unique structures at the nanometer level determine their incredible functions, and based on this, they can be widely used in the field of nanomedicine. However, nanomaterials do possess disadvantages that cannot be ignored, such as burst release, rapid elimination, and poor bioadhesion. Hydrogels are scaffolds with three-dimensional structures, and they exhibit good biocompatibility and drug release capacity. Hydrogels are also associated with disadvantages for biomedical applications such as poor anti-tumor capability, weak bioimaging capability, limited responsiveness, and so on. Incorporating nanomaterials into the 3D hydrogel network through physical or chemical covalent action may be an effective method to avoid their disadvantages. In nanocomposite hydrogel systems, multifunctional nanomaterials often work as the function core, giving the hydrogels a variety of properties (such as photo-thermal conversion, magnetothermal conversion, conductivity, targeting tumor, etc.). While, hydrogels can effectively improve the retention effect of nanomaterials and make the nanoparticles have good plasticity to adapt to various biomedical applications (such as various biosensors). Nanocomposite hydrogel systems have broad application prospects in biomedicine. In this review, we comprehensively summarize and discuss the most recent advances of nanomaterials composite hydrogels in biomedicine, including drug and cell delivery, cancer treatment, tissue regeneration, biosensing, and bioimaging, and we also briefly discussed the current situation of their commoditization in biomedicine.

A high-conductive, anti-freezing, antibacterial and anti-swelling starch-based physical hydrogel for multifunctional flexible wearable sensors

Flexible wearable sensors based on conductive hydrogels are attracting increasing interest. To meet the urgent demands of sustainability and eco-friendliness, biopolymer-based physically crosslinked hydrogels have drawn great attention. Starch has a great potential due to its renewability, biocompatibility, nontoxicity and low cost. However, poor mechanical property, low conductivity and lack of versatility are seriously limiting the applications of starch-based hydrogels in wearable sensors. Moreover, the development of starch hydrogel-based wearable sensors in harsh conditions remains a challenge. Herein, multifunctional and physical crosslinking hydrogels were developed by introducing ionic liquid (1-ethyl-3-methyl imidazolium acetate) and metal salt (AlCl₃) into starch/polyvinyl alcohol double-network structure. The hydrogel exhibited excellent stretchability (567%), tensile strength (0.53 MPa), high conductivity (2.75 S·m^-1), good anti-freezing, antibacterial and anti-swelling properties. A wearable sensor assembled from the starch-based hydrogel exhibited a wide working range, high sensitivity (gauge factor: 5.93) and excellent reversibility. Due to the versatility, the sensor effectively detected human motion in normal and underwater environment, and possessed a sensitive pressure and thermal response. Overall, the present work provided a promising route to develop multifunctional and "green" biopolymer-based hydrogels for wearable sensors in human health and sporting applications.

Synthesis and Properties of Hydrogels on Medical Titanium Alloy Surface by Modified Dopamine Adhesion

Medical titanium alloy Ti-6Al-4V (TC4) is an ideal surgical implant material for human tissue repair and replacement. TC4 implantation will be in close contact with human soft tissue and has mechanical compatibility problems. In order to solve this problem, the hydrogel was formed on the surface of TC4 by utilizing the adhesion of dopamine, and the storage modulus of the formed hydrogel matched that of human soft tissue. In this paper, the surface of TC4 was first modified with dopamine (DA) and 2-bromoisobutyryl bromide (BIBB). 2-(2-methoxyethoxy) ethyl methacrylate (MEO₂MA), oligo (ethylene oxide) methacrylate (OEGMA) and 2-methacryloyloxyethyl phosphorylcholine (MPC) are used as monomers, and methylenebisacrylamide (MBA) is used as cross-linking agent. Thermosensitive hydrogels were formed on the surface of modified TC4 by the ATRP technique. The successful synthesis of initiator and hydrogels on TC4 was demonstrated by Fourier transform infrared (FT-IR) and X-ray photoelectron spectroscopy (XPS). The morphology of the hydrogel was observed by the scanning electron microscope (SEM), and the water absorption and temperature sensitivity were investigated by the swelling property. The thermal and mechanical properties of these gels were measured using thermal analysis system (TAS) and dynamic mechanical analyzer (DMA). The results show that the hydrogel on TC4 has good thermal stability and storage modulus that matches human soft tissue.

Superior, Environmentally Tolerant, Flexible, and Adhesive Poly(ionic liquid) Gel as a Multifaceted Underwater Sensor

In recent years, gel-based sensors have been widely considered and fully developed. However, it is of vital importance, yet rather challenging to achieve a multifaceted gel, which can unify the advantages of favorable conductivity, high adhesion, excellent environmental resistance, and so forth and be applied in various harsh conditions. Herein, an ideal, extremely stable, adhesive, conductive poly(ionic liquid) gel (PILG) was designed via a one-step photoinitiated radical polymerization based on 1-vinyl-3-butylimidazolium bis(trifluoromethylsulfonyl)imide (VBIm-NTf₂) cross-linked with ethylene glycol dimethacrylate (EGDMA) in methyltributylammonium bis(trifluoromethanesulfonyl)imide (N₁₄₄₄-NTf₂) medium. There are abundant hydrophobic butyl chains and fluorinated groups in VBIm-NTf₂ and N₁₄₄₄-NTf₂, which can impart the PILG with stable conductivity, excellent environmental tolerance, and adhesion even in water due to the ion-dipole and ion-ion interactions. The resulting PILG can be assembled as a soft and smart sensor that can be applied in specific conditions such as underwater or undersea and even in dynamic water, achieving a stable signal transmission. Meanwhile, the PILG can be utilized as a flexible electrode to convey ECG signals in air or water whether it is in the static or dynamic state. Therefore, it is envisioned that this novel PILG will serve as a hopeful electrical device for signal detection and healthy management in specific environments.

Flexible porous Gelatin/Polypyrrole/Reduction graphene oxide organohydrogel for wearable electronics

Conductive hydrogel-based flexible electronics have attracted immense interest in wearable sensor, soft robot and human-machine interface. However, the application of hydrogels in flexible electronics is limited by the deterioration of mechanical and electrical properties due to freezing at low temperature and desiccation after long-term use. Meanwhile, flexible electronics based on hydrogel are usually not breathable, which has a great impact on wearing comfort and signal stability in long-term sensing. In this work, an adjustable porous gelatin/polypyrrole/reduction graphene oxide (Gel/PPy/rGO) organohydrogel with high breathability (14 g∙cm^-2∙h^-1), conductivity (5.25 S/m), mechanical flexibility, anti-freezing and long-term stability is prepared via the combination method of biological fermentation and salt-out toughening crosslinking. The sensor fabricated from the prepared porous organohydrogel exhibits excellent sensing sensitivity, fast response ability, and good endurance, which monitors both weak and intense human activities effectively like finger bending, elbow bending, walking and running, and tiny pulse beating. A pressure sensor array prepared from the porous organohydrogel detects pressure variation in 2D sensitively. Furthermore, the porous organohydrogel is utilized as flexible electrodes for the accurate collection and recognition of human physiological signals (EMG, ECG) and as an interface between human and machine.

Lignin-containing hydrogels with anti-freezing, excellent water retention and super-flexibility for sensor and supercapacitor applications

We developed a highly conductive and flexible, anti-freezing sulfonated lignin (SL)-containing polyacrylic acid (PAA) (SL-g-PAA-Ni) hydrogel, with a high concentration of NiCl₂. Ni²⁺ contributes multi-functions to the preparation of the hydrogel and its final properties, such as fast polymerization reaction as a result of the presence of redox pairs of Ni³⁺/Ni²⁺ and hydroquinone/quinone, and anti-freezing properties of the hydrogel due to the salt effects of NiCl₂ so that at -20 °C the hydrogel shows similar properties to those at the room temperature. Thanks to the effective coordinations of Ni²⁺ with catecholic groups and carboxylic groups, as well as the rich hydrogen bonding capacity, the resultant hydrogel possesses excellent mechanical properties. High ionic conductivity (6.85 S·m^-1) of the hydrogel is obtained due to the supply of high concentration of Ni²⁺. Moreover, the ionic solvation effect of NiCl₂ in the hydrogel imparts excellent water retention ability, with water retention of ~93 % after 21-day storage. The SL-g-PAA-Ni hydrogel can accurately detect various human motions at -20 °C. The supercapacitor assembled from SL-g-PAA-Al hydrogel at -20 °C manifests a high specific capacitance of 252 F·g^-1, with maximum energy density of 26.97 Wh·kg^-1, power density of 2667 W·kg^-1, and capacitance retention of 96.7 % after 3000 consecutive charge-discharge cycles.

Conductive Hydrogels with Ultrastretchability and Adhesiveness for Flame- and Cold-Tolerant Strain Sensors

Hydrogel strain sensors with extreme temperature tolerance have recently gained great attention. However, the sensing ability of these hydrogel strain sensors changes with temperature, resulting in the variety of output signals that causes signal distortion. In this study, double-network hydrogels comprising SiO₂ nanoparticles composed of polyacrylamide and phytic acid-doped polypyrrole were prepared and applied on strain sensors with a wide sensing range, high adhesiveness, and invariable strain sensitivity under flame and cold environments. The hydrogels had stable conductivity, excellent adhesive strength of up to 79.7 kPa on various substrates, and high elongation of up to 1896% at subzero temperature and after heating. They also exhibited effective flame retardancy with low surface temperature (71.2 °C) after 1200 s of heating (200 °C) and antifreezing properties at a low temperature of -20 °C. Remarkably, even under cold temperature and heat treatment, the hydrogel-based strain sensor displayed consistent sensing behaviors in detecting human motions with a broad strain range (up to 500%) and steady gauge factor (GF, ∼2.90). Therefore, this work paves the way for the applications of hydrogel sensors in robotic skin, human-mechanical interfaces, and health monitoring devices under harsh operating environments.

Anti-Freezing Strategies of Electrolyte and their Application in Electrochemical Energy Devices

Wider scenes of human's activities under low temperature demand promising performance of anti-freezing electrochemical energy devices, and the promotion of performance is mainly limited by electrolyte. However, despite many relevant research works reported, there are still few reviews that systematically and comprehensively summarize these modified approaches and applications. In this focus review, we classify the prominent anti-freezing strategies as high concentration aqueous electrolyte, organic additives, organic electrolyte and others. Relevant research works have been put to clarify their anti-freezing mechanisms and exhibit the modification effects. Besides, various energy devices including metal-air batteries, non-gas batteries and supercapacitors which employed aforementioned strategies are discussed and their key low-temperature performance indexes are summarized to exhibit the advanced research progress. Finally, we put forward some remaining challenges of these modification strategies toward practical application and propose prospects on future development of low-temperature electrochemical energy devices.

Gelatin-Reinforced Zwitterionic Organohydrogel with Tough, Self-Adhesive, Long-Term Moisturizing and Antifreezing Properties for Wearable Electronics

Strong mechanical performance, appropriate adhesion capacity, and excellent biocompatibility of conductive hydrogel-based sensors are of great significance for their application. However, conventional conductive hydrogels usually exhibit insufficient mechanical strength and adhesion. In addition, they will lose flexibility and conductivity under subzero temperature and a dry environment owing to inevitable freezing and evaporation of water. In this study, a tough, flexible, self-adhesive, long-term moisturizing, and antifreezing organohydrogel was prepared, which was composed of gelatin, zwitterionic poly [2-(methacryloyloxy) ethyl] dimethyl-(3-sulfopropyl) (PSBMA), MXene nanosheets, and glycerol. Natural gelatin was incorporated to enhance mechanical performance via the entanglement of a physical cross-linked network and a PSBMA network, which was also used as a stabilizer to disperse MXene into the organohydrogel. Zwitterionic PSBMA endowed the organohydrogel with good adhesion and self-healing properties. Long-term moisturizing properties and antifreeze tolerance could be achieved owing to the synergistic water retention capacity of PSBMA and glycerol. The resulting PSBMA-gelatin-MXene-glycerol (PGMG) organohydrogel exhibited high mechanical fracture strength (0.65 MPa) and stretchability (over 1000%), excellent toughness (3.87 MJ/m³), strong and repeated adhesion to diverse substrates (e.g., paper, glass, silicon rubber, iron, and pig skin), good fatigue resistance (under the cyclic stretching-releasing process), and rapid recovery capacity. Moreover, the PGMG organohydrogel showed good stability under -40 °C. The sensor based on PGMG organohydrogel could tightly attach to the human skin and real-time-monitor the motions of joints (e.g., bending of the finger, wrist, elbow, and knee) and the change in mood such as smiling and frowning. Therefore, PGMG organohydrogels have a huge potential for wearable sensors under room temperature or extreme environments.

Resilient and Self-Healing Hyaluronic Acid/Chitosan Hydrogel With Ion Conductivity, Low Water Loss, and Freeze-Tolerance for Flexible and Wearable Strain Sensor

Conductive hydrogel is a vital candidate for the fabrication of flexible and wearable electric sensors due to its good designability and biocompatibility. These well-designed conductive hydrogel–based flexible strain sensors show great potential in human motion monitoring, artificial skin, brain computer interface (BCI), and so on. However, easy drying and freezing of conductive hydrogels with high water content greatly limited their further application. Herein, we proposed a natural polymer-based conductive hydrogel with excellent mechanical property, low water loss, and freeze-tolerance. The main hydrogel network was formed by the Schiff base reaction between the hydrazide-grafted hyaluronic acid and the oxidized chitosan, and the added KCl worked as the conductive filler. The reversible crosslinking in the prepared hydrogel resulted in its resilience and self-healing feature. At the same time, the synthetic effect of KCl and glycerol endowed our hydrogel with outstanding anti-freezing property, while glycerol also endowed this hydrogel with anti-drying property. When this hydrogel was assembled as a flexible strain sensor, it showed good sensitivity (GF = 2.64), durability, and stability even under cold condition (−37°C).