Substrate Specificity in Photocatalytic Degradation of Mixtures of Organic Contaminants in Water

Strategies for enhancing performance of perovskite bismuth ferrite photocatalysts (BiFeO3): A comprehensive review

Organic pollutants pose a significant threat to water safety, and their degradation is of paramount importance. Photocatalytic technology has emerged as a promising approach for environmental remediation, and Bismuth ferrite (BiFeO3) has been shown to exhibit remarkable potential for photocatalytic degradation of water pollutants, with its excellent crystal structure properties and visible light photocatalytic activity. This review presents an overview of the crystal properties and photocatalytic mechanism of perovskite bismuth ferrite (BiFeO3), as well as a summary of various strategies for enhancing its efficiency in photocatalytic degradation of organic pollutants. These strategies include pure phase preparation, microscopic modulation, composite modification of BiFeO3, and the integration of Fenton-like reactions and external field-assisted methods to improve its photocatalytic performance. The review emphasizes the impact of each strategy on photocatalytic enhancement. By providing comprehensive strategies for improving the efficiency of BiFeO3 photocatalysis, this review inspires new insights for efficient degradation of organic pollutants using BiFeO3 photocatalysis and contributes to the development of photocatalysis in environmental remediation.

A smart and sustainable pathway for abatement of single and binary mixtures of dyes through magnetically retrievable Ca4Fe9O17 anchored on Biochar matrix

In this work, the author developed Ca4Fe9O17/biochar (CFB) via a green method through a facile co-precipitation procedure involving egg shells as calcium precursor and investigating its performance in single as well as binary solution of methylene blue (MB) and rhodamine B (RhB). The CFB nanocomposite was characterized by XRD, SEM, TEM, XPS, Raman, FTIR, BET, and VSM. ESR studies show the presence of hydroxyl (·OH) and superoxide (O2·¯) radicals, which are primary radical species for pollutant degradation. The average crystalline size of CFB nanocomposites was found to be 32.992 nm using XRD, whereas TEM analysis indicates a particle diameter of 35-36 nm. The degradation efficacy of MB and RhB dyes was achieved at 99.2% and 98.6%, respectively, in a single solution, whereas 99.4% and 99.2%, respectively, in a binary solution within 36 min. Additionally, an iron cluster was formed during the degradation process of MB dye. The degradation of organic contaminants and generation of iron clusters from the degraded dye products were both expedited by the remarkable extension effect of the Ca4Fe9O17 in the CFB nanocomposites. The three processes were achieved using CFB nanocomposite: (1) the advanced oxidation process; (2) degradation of MB and RhB dye in single as well as binary solution with enhanced efficiency, (3) the production of the iron cluster from degraded products. Thus, these three steps constitute a smart and sustainable way that leads to an effective effluent water treatment system and the generation of iron clusters preventing secondary pollution.

Synergistic Effect of Amorphous Ti(IV)-Hole and Ni(II)-Electron Cocatalysts for Enhanced Photocatalytic Performance of Bi2WO6

Bi2WO6 has become a common photocatalyst due to its advantages of simple synthesis and high activity. However, the defects of pure Bi2WO6 such as low light reception hinder its application in photocatalysis. In this study, based on the modification of Bi2WO6 with Ti(IV) as a cavity co-catalyst, new Ni- and Ti-doped nanosheets of Bi2WO6 (Ni/Ti-Bi2WO6) were prepared by a one-step wet thermal impregnation method and used for the photocatalytic degradation of tetracycline. The experimental results showed that the photocatalytic activity of Ni/Ti-Bi2WO6 modified by the two-component catalyst was significantly better than those of pure Bi2WO6 and Ti-Bi2WO6 modified with Ti(IV) only. The photocatalytic effect of Ni/Ti-Bi2WO6 with different Ni/Ti molar ratios was investigated by the degradation of TC. The results showed that 0.4Ni/Ti-Bi2WO6 possessed the best photocatalytic performance, with a degradation rate of 92.9% at 140 min TC. The results of cycling experiments showed that the catalyst exhibited high stability after five cycles. The scavenger experiment demonstrated that the h+ and O2− were the main reactive species. The enhanced photocatalytic activity of Bi2WO6 could be attributed to the synergistic effect between the Ti(IV) as a hole cocatalyst and Ni(II) as an electron cocatalyst, which effectively promoted the separation of photogenerated carriers.

Improving of photocatalytic activity of barium ferrate via bismuth and copper co-doping for degradation of paracetamol under visible light irradiation

Nanosized Ba_1-xBi_xFe_1-xCu_xO₃ (12-50 nm) with x values of 0, 0.01, 0.05, and 0.1 system was prepared using the Pechini method. Structural, morphological, surface and optical characterizations were performed for the prepared samples. Cubic phase was the predominant phase for the undoped BaFeO₃ and Bi and Cu co-doped BaFeO₃ samples. Minor phases of monoclinic Ba₂Fe₂O₅, orthorhombic BaFe₂O₄ and orthorhombic BaCO₃ were identified for all the prepared samples. Ba_0.95Bi_0.05Fe_0.95Cu_0.05O₃ sample has the lowest band gap (2.43 eV). 98.1% paracetamol removal was achieved with 0.75 g/L of Ba_0.95Bi_0.05Fe_0.95Cu_0.05O₃ at pH 9 after 120 min. The paracetamol degradation follows the pseudo first-order kinetics. HO^• is the main oxidative species responsible for the paracetamol degradation. Gas chromatography-mass spectrometry (GC-MS) analysis was performed at the end of the photocatalytic degradation experiment under optimum operating condition using Ba_0.95Bi_0.05Fe_0.95Cu_0.05O₃ to explain the reaction mechanism and identify the intermediate by-products which is confirmed by ultraviolet/visible (UV/Vis) spectroscopy study at different reaction times.

Photocatalytic degradation-based efficient elimination of pesticides using ruthenium/gold metal nanoparticle-anchored zirconium dioxide

Ruthenium and gold metal nanoparticles-incorporated zirconium dioxide (ZrO2@Ru and ZrO2@Au) nanostructures were developed as promising photocatalysts for wastewater remediation.

Preparation of LDO@TiO2 core-shell nanosheets for enhanced photocatalytic degradation of organic pollution

TiO₂-based nanosheet materials with a core-shell structure are expected to be one of the promising photocatalysts for the degradation of organic pollution. It is a challenge to synthesize TiO₂ by the desired nucleation and growth process, so most reported TiO₂ core-shell photocatalysts are prepared using TiO₂ as a core material. Layered double hydroxides (LDHs) are considered ideal platforms to grow TiO₂in situ and further serve as additional components to improve the separation of photogenerated charge carriers. In this work, we report the design and fabrication of anatase TiO₂-coated ZnAl-layered double oxide (LDO@TiO₂) nanosheets, which involve the in situ growth of TiO₂ on ZnAl-LDH followed by subsequent calcination treatment. The resulting LDO@TiO₂ photocatalyst yields typical core-shell nanosheet morphology with a mesoporous structure, exhibiting excellent photodegradation and mineralization efficiency for organic pollution.

Recyclable ZnS QDs as an efficient photocatalyst for dye degradation under the UV and visible light

Energy-efficient synthesized ZnS QDs with unique visible range absorption through defects show the best photocatalytic activity under UV light and best degradation under visible light.

Synthesis and characterization of Ag-loaded p-type TiO2 for adsorption and photocatalytic degradation of tetrabromobisphenol A

A p-type TiO₂ with Ti vacancies (D-TiO₂ ) was synthesized by a facile solvothermal treatment, and Ag/TiO₂ with different Ag loading amount was prepared through a photo-reduction deposition method. The samples were characterized through scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The adsorption and photocatalytic characteristics of tetrabromobisphenol A (TBBPA) on D-TiO₂ and Ag/TiO₂ were investigated. The adsorption of TBBPA on Ag/TiO₂ was significantly enhanced and was five times greater than that of pure TiO₂ . The increase in pH significantly inhibited the adsorption of TBBPA. The 2%-Ag/TiO₂ nearly completely degraded TBBPA in 10 min under UV-Vis light (λ > 360 nm), and the apparent reaction rate constant (k_app ) reached 0.63 min^-1 . The significantly enhanced UV-Vis light catalytic properties of the Ag/TiO₂ in comparison with that of TiO₂ were attributed to the increased adsorption capacity and electron transfer ability of the Ag/TiO₂ . Free radical trap experiments results showed that holes and superoxide radicals play a major role in the catalytic degradation of TBBPA by Ag/TiO₂ . Moreover, the Ag/TiO₂ catalyst exhibits high stability during TBBPA degradation even after three cycles. PRACTITIONER POINTS: Ti-defected TiO₂ and Ag/TiO₂ were synthesized using a solvothermal and photo-reduction deposition, respectively. Ag/TiO₂ exhibited outstanding adsorption and photocatalytic activity for TBBPA removal under UV-Vis light. Holes and superoxide radicals play a major role in the photocatalytic degradation of TBBPA.

Ultrafast Photocatalytic Reaction Screening by Mass Spectrometry

Here we report a semiconductor-assisted laser desorption/ionization mass spectrometry (SA-LDI MS) platform to monitor photocatalytic reactions online and apply it for ultrafast reaction screening. In this method, we use photocatalytic nanomaterials as the substrate for LDI and then initiate and monitor the reactions simultaneously. The features of our method include the following: (i) It has a reaction acceleration effect: only seconds are needed in our interfacial reactions vs hours in conventional bulk phase. (ii) The reaction trend in our system agrees with that in bulk phase. (iii) By adding a stable analogue of reactant as internal standard, a quantification of the reaction can be achieved. (iv) The sensitivity is high: for 500 amol of reactant, the photocatalytic reaction can still be initiated and detected. This platform has advantages in ultrafast reaction screening (e.g., screening of nine catalysts requires 24 h by the UPLC-MS system but only 10 min by SA-LDI MS). Furthermore, the high specificity of MS enables the screening of catalytic selectivity of A-TiO₂ nanoparticles for a methyl red (MR) and acid yellow (AY) mixture, whose absorption wavelengths are overlapped and thus cannot be discriminated by conventional optical methods. Furthermore, by using SA-LDI MS, we also monitored reductive debrominations during the degradation process of polybrominated diphenyl ethers (PBDEs), which is a type of important pollutant that is difficult to degrade and detect in liquid phase, and the photocatalytic reduction of CO₂. Overall, SA-LDI MS realizes ultrafast photocatalytic reaction screening for the first time and provides practical analytical value in the field of catalyst screening.

Enhanced photocatalytic activity of Bi2WO6 for the degradation of TC by synergistic effects between amorphous Ti and Ni as hole–electron cocatalysts

The possible mechanism of photocatalytic degradation of TC by Ni/Ti-Bi₂WO₆ under visible light.

Accelerated degradation of pollutants via a close interface connection in heterojunction, and special solid-liquid interactions

The solid-solid or solid-liquid interfaces are vital for the photocatalytic reaction. Herein, AgI nanoparticles (NPs) attached on the (0 1 1) plane of Ag₂WO₄ nanorods were synthesized by a facile method at room temperature. The co-crystalization of the two components caused their phase transformation and the existence of a strong interface interaction. Meanwhile, the porous batt-like morphology of AgI NPs provided more contact sites for organic pollutants to induce a strong interaction at the solid-liquid interface. The heterojunction nanocatalyst was found to be highly effective for the degradation and mineralization of various pollutants, including the endocrine-disrupting chemical bisphenol A, the antibiotics sulfamethoxazole and ciprofloxacin, and the azo-dye methyl orange under visible light (λ > 420 nm). Its photocatalytic rate was 91, 52, and 39 times higher than that of bulk AgI, standard TiO_2-xN_x, and the physical mixture of the two components, respectively. Further studies demonstrated that the strong interactions between the two components and the pollutants promoted the electron transfer from organic pollutants to AgI NPs and then from AgI NPs to Ag₂WO₄ nanorods, resulting in the rapid oxidation of pollutants and the formation of Ag NPs. The newly formed Ag NPs further accelerated the degradation of pollutants due to a SPR effect and an empty levels feeding role to produce h⁺ on Ag₂WO₄, which can oxidize surface-adsorbed H₂O into OH. This photocatalytic system provided a platform for understanding solid-solid and solid-liquid interface interaction and a novel design idea for water pollutants removal.

Environmentally benign fabrication of SnO2-CNT nanohybrids and their multifunctional efficiency as an adsorbent, catalyst and antimicrobial agent for water decontamination

Herein, we described a biogenic, additive fee, eco-friendly synthesized SnO₂-CNT nanohybrid as an efficient, re-collectable and reusable material for onsite water remediation. We demonstrated that the SnO₂-CNTs can provide a one stop solution for water remediation as it effectively accomplished the major treatment tasks like adsorption, catalytic transformation/degradation and disinfection. The structural, morphological, surface chemical compositions of the nanocomposite and the adsorption, catalytic and antimicrobial properties were investigated using common characterization and instrumental techniques. The results revealed the brilliant efficiency of SnO₂-CNT nanoadsorbent towards As (III) and a maximum Langmuir adsorption capacity of 106.95 mg/g was observed at high arsenite concentration (C₀ = 1 mg/L). The nanoadsorbent was also found to be equally efficient in low arsenite concentration ranges (C₀ = 100 μg/L) as it could bring down the arsenic concentration below maximum permissible limit. Moreover, using model pollutants like p-nitrophenol, Alizarin red S, Metronidazole, bacterial strains (Bacillus subtilis, Escherichia coli, Streptococcus pneumonia etc.), and fungal strains (Aspergillus niger and Candida albicans), the multifunctional capability of SnO₂-CNT towards water decontamination has been established. Our results suggested the promising potential of hierarchical nano-heterojunctions for engineering efficient water treatment processes.

A new nano-photocatalyst based on Pt and Bi co-doped TiO2 for efficient visible-light photo degradation of amoxicillin

Herein, the photo degradation of amoxicillin (AMX) was thoroughly investigated using Pt and Bi co-doped TiO₂ photocatalysts under visible-light irradiation.

Controllable interlayer space effects of layered potassium triniobate nanoflakes on enhanced pH dependent adsorption-photocatalysis behaviors

Despite the extensive study of two-dimensional layered KNb₃O₈ (KN), there still remains some vital problems need to be clarified for future applications in environmental purification. Here we demonstrated the successful preparation of interlayer-controlled KN nanoflakes using alkaline hydrothermal conditions by adjusting the amount of thiourea in the reaction. This process resulted in KN nanoflakes with a larger specific surface area than previously reported. Moreover, the initial pH of dye solution and discrepant preferential orientation of interlayer peak have been proved to significantly influence the adsorption and photocatalysis performances of KN. In addition, relevant photocatalysis mechanisms have been expounded, by combined the first-principles calculation. The present work could be helpful in revealing the intrinsic adsorption-photocatalysis features of KN and other similar niobates.

Contaminants of emerging concern: a review of new approach in AOP technologies

The presence of contaminants of emerging concern (CECs) such as pharmaceuticals and personal care products (PPCPs), endocrine-disrupting compounds (EDCs), flame retardants (FRs), pesticides, and artificial sweeteners (ASWs) in the aquatic environments remains a major challenge to the environment and human health. In this review, the classification and occurrence of emerging contaminants in aquatic environments were discussed in detail. It is well documented that CECs are susceptible to poor removal during the conventional wastewater treatment plants, which introduce them back to the environment ranging from nanogram per liter (e.g., carbamazepine) up to milligram per liter (e.g., acesulfame) concentration level. Meanwhile, a deep insight into the application of advanced oxidation processes (AOPs) on mitigation of the CECs from aquatic environment was presented. In this regard, the utilization of various treatment technologies based on AOPs including ozonation, Fenton processes, sonochemical, and TiO₂ heterogeneous photocatalysis was reviewed. Additionally, some innovations (e.g., visible light heterogeneous photocatalysis, electro-Fenton) concerning the AOPs and the combined utilization of AOPs (e.g., sono-Fenton) were documented.

Dual-Functional Ultrafiltration Membrane for Simultaneous Removal of Multiple Pollutants with High Performance

Simultaneous removal of multiple pollutants from aqueous solution with less energy consumption is crucial in water purification. Here, a novel concept of dual-functional ultrafiltration (DFUF) membrane is demonstrated by entrapment of nanostructured adsorbents into the finger-like pores of ultrafiltration (UF) membrane rather than in the membrane matrix in previous reports of blend membranes, resulting in an exceptionally high active content and simultaneous removal of multiple pollutants from water due to the dual functions of rejection and adsorption. As a demonstration, hollow porous Zr(OH)_x nanospheres (HPZNs) were immobilized in poly(ether sulfone) (PES) UF membranes through polydopamine coating with a high content of 68.9 wt %. The decontamination capacity of DFUF membranes toward multiple model pollutants (colloidal gold, polyethylene glycol (PEG), Pb(II)) was evaluated against a blend membrane. Compared to the blend membrane, the DFUF membranes showed 2.1-fold increase in the effective treatment volume for the treatment of Pb(II) contaminated water from 100 ppb to below 10 ppb (WHO drinking water standard). Simultaneously, the DFUF membranes effectively removed the colloidal gold and PEG below instrument detection limit, however the blend membrane only achieved 97.6% and 96.8% rejection for colloidal gold and PEG, respectively. Moreover, the DFUF membranes showed negligible leakage of nanoadsorbents during testing; and the membrane can be easily regenerated and reused. This study sheds new light on the design of high performance multifunction membranes for drinking water purification.

Superior adsorption and photoinduced carries transfer behaviors of dandelion-shaped Bi2S3@MoS2: experiments and theory

The enhanced light-harvesting capacity and effective separation of photogenerated carriers in fantastic hierarchical heterostructures enjoy striking attention for potential applications in the field of solar cells and photocatalysis. A three-dimensional (3D) dandelion-shaped hierarchical Bi₂S₃ microsphere compactly decorated with wing-shaped few layered MoS₂ lamella (D-BM) was fabricated via a facile hydrothermal self-assembly process. Especially, polyethylene glycol (PEG) has been proven as the vital template to form D-BM microsphere. Importantly, the as-prepared D-BM microsphere presents pH-dependent superior adsorption behavior and remarkable visible light photocatalytic activity for degradation of organic dyestuffs (Rhodamine B/RhB and Methylene blue/MB), far exceeding those for the pure Bi₂S₃ and MoS₂. It is understandable that D-BM with high surface area possesses more active sites and promotes light utilization due to the unique porous structure with outspread wings. Besides, based on the experiments and theoretical calculations, the staggered type II band alignment of D-BM permits the charge injection from Bi₂S₃ to MoS₂, subsequently accelerates the separation and restrains the recombination of carriers, leading to excellent photocatalytic activity, as well as the photoconductance and photoresponse performance (with I_light/I_dark ratio 567).

Boosted adsorption–photocatalytic activities and potential lithium intercalation applications of layered potassium hexaniobate nano-family

We demonstrated that the KN nano-family (including KN nanolaminas and nano hollow spheres) can be derived from the same Nb₂O₅-based hydrothermal reaction.

Probing the inhomogeneity and intermediates in the photosensitized degradation of rhodamine B by Ag3PO4 nanoparticles from an ensemble to a single molecule approach

This work reports the single-molecule observations of the photosensitized process and intermediates generation in the photodegradation of RhB by Ag₃PO₄ nanoparticles.

Polydopamine nanotubes-templated synthesis of TiO2 and its photocatalytic performance under visible light

As templates for generation of TiO₂ photocatalysts, polydopamine nanotubes can provide codopants (carbon and nitrogen) and graphene-like carbon coverings simultaneously.

Emerging trends in photodegradation of petrochemical wastes: a review

Various human activities like mining and extraction of mineral oils have been used for the modernization of society and well-beings. However, the by-products such as petrochemical wastes generated from such industries are carcinogenic and toxic, which had increased environmental pollution and risks to human health several folds. Various methods such as physical, chemical and biological methods have been used to degrade these pollutants from wastewater. Advance oxidation processes (AOPs) are evolving techniques for efficient sequestration of chemically stable and less biodegradable organic pollutants. In the present review, photocatalytic degradation of petrochemical wastes containing monoaromatic and poly-aromatic hydrocarbons has been studied using various heterogeneous photocatalysts (such as TiO₂, ZnO and CdS. The present article seeks to offer a scientific and technical overview of the current trend in the use of the photocatalyst for remediation and degradation of petrochemical waste depending upon the recent advances in photodegradation of petrochemical research using bibliometric analysis. We further outlined the effect of various heterogeneous catalysts and their ecotoxicity, various degradation pathways of petrochemical wastes, the key regulatory parameters and the reactors used. A critical analysis of the available literature revealed that TiO₂ is widely reported in the degradation processes along with other semiconductors/nanomaterials in visible and UV light irradiation. Further, various degradation studies have been carried out at laboratory scale in the presence of UV light. However, further elaborative research is needed for successful application of the laboratory scale techniques to pilot-scale operation and to develop environmental friendly catalysts which support the sustainable treatment technology with the "zero concept" of industrial wastewater. Nevertheless, there is a need to develop more effective methods which consume less energy and are more efficient in pilot scale for the demineralization of pollutant.