Spectroscopic Evidence and Density Functional Theory (DFT) Analysis of Low-Temperature Oxidation of Cu+ to Cu2+NOx in Cu-CHA Catalysts: Implications for the SCR-NOx Reaction Mechanism

Synergistic Etching and Hydrogen Bonding-Induced Self-Assembly of MXene/MOF Hybrid Aerogel for Flexible Room-Temperature Gas Sensing

Limited by insufficient active sites and restricted mechanical strength, designing reliable and wearable gas sensors with high activity and ductility remains a challenge for detecting hazardous gases. In this work, a thermally induced and solvent-assisted oxyanion etching strategy was implemented for selective pore opening in a rigid microporous Cu-based metal-organic framework (referred to as CuM). A conductive CuM/MXene aerogel was then self-assembled through cooperative hydrogen bonding interactions between the carbonyl oxygen atom in PVP grafted on the surface of defect-rich Cu-BTC and the surface functional hydroxyl group on MXene. A flexible NO2 sensing performance using the CuM/MXene aerogel hybridized sodium alginate hydrogel is finally achieved, demonstrating extraordinary sensitivity (S = 52.47 toward 50 ppm of NO2), good selectivity, and rapid response/recovery time (0.9/4.5 s) at room temperature. Compared with commercial sensors, the relative error is less than 7.7%, thereby exhibiting significant potential for application in monitoring toxic and harmful gases. This work not only provides insights for guiding rational synthesis of ideal structure models from MOF composites but also inspires the development of high-performance flexible gas sensors for potential multiscenario applications.

Vapor-Phase Synthesis of Electrocatalytic Covalent Organic Frameworks

The inability to process many covalent organic frameworks (COFs) as thin films plagues their widespread utilization. Herein, a vapor-phase pathway for the bottom-up synthesis of a class of porphyrin-based COFs is presented. This approach allows integrating electrocatalysts made of metal-ion-containing COFs into the electrodes' architectures in a single-step synthesis and deposition. By precisely controlling the metal sites at the atomic level, remarkable electrocatalytic performance is achieved, resulting in unprecedentedly high mass activity values. How the choice of metal atoms, i.e., cobalt and copper, can determine the catalytic activities of POR-COFs is demonstrated. The theoretical data proves that the Cu site is highly active for nitrate conversion to ammonia on the synthesized COFs.

Effect of Framework Composition and NH3 on the Diffusion of Cu+ in Cu-CHA Catalysts Predicted by Machine-Learning Accelerated Molecular Dynamics

Cu-exchanged zeolites rely on mobile solvated Cu+ cations for their catalytic activity, but the role of the framework composition in transport is not fully understood. Ab initio molecular dynamics simulations can provide quantitative atomistic insight but are too computationally expensive to explore large length and time scales or diverse compositions. We report a machine-learning interatomic potential that accurately reproduces ab initio results and effectively generalizes to allow multinanosecond simulations of large supercells and diverse chemical compositions. Biased and unbiased simulations of [Cu(NH3)2]+ mobility show that aluminum pairing in eight-membered rings accelerates local hopping and demonstrate that increased NH3 concentration enhances long-range diffusion. The probability of finding two [Cu(NH3)2]+ complexes in the same cage, which is key for SCR-NOx reaction, increases with Cu content and Al content but does not correlate with the long-range mobility of Cu+. Supporting experimental evidence was obtained from reactivity tests of Cu-CHA catalysts with a controlled chemical composition.

Copper Site Motion Promotes Catalytic NOx Reduction under Zeolite Confinement

Ammonia-mediated selective catalytic reduction (NH3-SCR) is currently the key approach to abate nitrogen oxides (NOx) emitted from heavy-duty lean-burn vehicles. The state-of-art NH3-SCR catalysts, namely, copper ion-exchanged chabazite (Cu-CHA) zeolites, perform rather poorly at low temperatures (below 200 °C) and are thus incapable of eliminating effectively NOx emissions under cold-start conditions. Here, we demonstrate a significant promotion of low-temperature NOx reduction by reinforcing the dynamic motion of zeolite-confined Cu sites during NH3-SCR. Combining complex impedance-based in situ spectroscopy (IS) and extended density-functional tight-binding molecular dynamics simulation, we revealed an environment- and temperature-dependent nature of the dynamic Cu motion within the zeolite lattice. Further coupling in situ IS with infrared spectroscopy allows us to unravel the critical role of monovalent Cu in the overall Cu mobility at a molecular level. Based on these mechanistic understandings, we elicit a boost of NOx reduction below 200 °C by reinforcing the dynamic Cu motion in various Cu-zeolites (Cu-CHA, Cu-ZSM-5, Cu-Beta, etc.) via facile postsynthesis treatments, either in a reductive mixture at low temperatures (below 250 °C) or in a nonoxidative atmosphere at high temperatures (above 450 °C).

A review on identification, quantification, and transformation of active species in SCR by EPR spectroscopy

Electron paramagnetic resonance (EPR) is the only technique that provides direct detection of free radicals and samples that contain unpaired electrons. Thus, EPR had an important potential application in the field of selective catalytic reduction of nitrogen oxide (SCR). For the first time, this work reviewed recent developments of EPR in charactering SCR. First, qualitative analysis focused on recognizing Cu, Fe, V, Ti, Mn, and free-radical (oxygen vacancy and superoxide radical) species. Second, quantification of the active species was obtained by a double-integral and calibration method. Third, the active species evolved because of different thermal treatments and redox-thermal processes under reductants (NH₃ and NO). The coordination information of the active species in catalysts and their effects on SCR performances were concluded from mechanism viewpoints. Finally, potential perspectives were put forward for EPR developments in characterizing the SCR processes in the future. After all, EPR characterization will help to have a deep understanding of structure-activity relationship in one catalyst.

Influence of Solvent on Selective Catalytic Reduction of Nitrogen Oxides with Ammonia over Cu-CHA Zeolite

The copper-exchanged zeolite Cu-CHA has received considerable attention in recent years, owing to its application in the selective catalytic reduction (SCR) of NO_x species. Here, we study the NH₃-SCR reaction mechanism on Cu-CHA using the hybrid quantum mechanical/molecular mechanical (QM/MM) technique and investigate the effects of solvent on the reactivity of active Cu species. To this end, a comparison is made between water- and ammonia-solvated and bare Cu species. The results show the promoting effect of solvent on the oxidation component of the NH₃-SCR cycle since the formation of important nitrate species is found to be energetically more favorable on the solvated Cu sites than in the absence of solvent molecules. Conversely, both solvent molecules are predicted to inhibit the reduction component of the NH₃-SCR cycle. Diffuse reflectance infrared fourier-transform spectroscopy (DRIFTS) experiments exploiting (concentration) modulation excitation spectroscopy (MES) and phase-sensitive detection (PSD) identified spectroscopic signatures of Cu-nitrate and Cu-nitrosamine (H₂NNO), important species which had not been previously observed experimentally. This is further supported by the QM/MM-calculated harmonic vibrational analysis. Additional insights are provided into the reactivity of solvated active sites and the formation of key intermediates including their formation energies and vibrational spectroscopic signatures, allowing the development of a detailed understanding of the reaction mechanism. We demonstrate the role of solvated active sites and their influence on the energetics of important species that must be explicitly considered for an accurate understanding of NH₃-SCR kinetics.

Hydrogen-Bond-Assisted Adsorption of Nitric Oxide on Various Metal-Loaded ZSM-5 Zeolites

Understanding the characteristics of nitric oxide (NO) adsorption on metal-loaded zeolites is a prerequisite for developing efficient catalysts for NO abatement reactions. In this study, we probed the effect of the hydrogen bond that exists between adsorbed NO and Brønsted acid sites (BAS) in various metal-loaded ZSM-5 zeolites (M-ZSM-5, wherein M = Fe, Co, Ni, Cu, Zn, Pd, Ag, and Au) by using density functional theory calculations. The presence of a hydrogen bond has altered the NO adsorption energies significantly; appreciable stabilization via hydrogen bonding is noted for NO complexes of Zn, Fe, and Co, and reasonable stabilization is obtained for Ni and Cu complexes, whereas an anomalous effect of a hydrogen bond is identified in Ag, Pd, and Au species. Moderate weakening of the N-O bond in all NO-adsorbed complexes primarily due to a hydrogen bond has been realized in terms of Mayer bond order and quantum theory of atoms in molecules topological analyses; N-O bond activation follows the order Ag < Pd < Au < Ni < Cu < Co < Fe < Zn. We obtained a good correlation between hydrogen bond distance and molecular electrostatic potential at the O atom (V_O) of NO adsorbed on BAS-free M-ZSM-5; which suggests that V_O can be considered as a key descriptor to infer the strength of a hydrogen bond between the adsorbed NO and M-ZSM-5 with BAS. Finally, the energy decomposition analysis in combination with natural orbitals for chemical valence has provided the qualitative aspects of electron back-donation from the metal to the antibonding molecular orbital of NO; this back-donation is quite impressive in hydrogen-bond-assisted NO adsorption. We expect that the findings of this study will open up the possibility of the design of BAS-containing metal-loaded zeolites for the catalytic mitigation of NO.

Rate Controlling in Low-Temperature Standard NH3-SCR: Implications from Operando EPR Spectroscopy and Reaction Kinetics

A series of seven Cu/SSZ-13 catalysts with Si/Al = 6.7 are used to elucidate key rate-controlling factors during low-temperature standard ammonia-selective catalytic reduction (NH₃-SCR), via a combination of SCR kinetics and operando electron paramagnetic resonance (EPR) spectroscopy. Strong Cu-loading-dependent kinetics, with Cu atomic efficiency increasing nearly by an order of magnitude, is found when per chabazite cage occupancy for Cu ion increases from ∼0.04 to ∼0.3. This is due mainly to the release of intercage Cu transfer constraints that facilitates the redox chemistry, as evidenced from detailed Arrhenius analysis. Operando EPR spectroscopy studies reveal strong connectivity between Cu-ion dynamics and SCR kinetics, based on which it is concluded that under low-temperature steady-state SCR, kinetically most relevant Cu species are those with the highest intercage mobility. Transient binuclear Cu species are mechanistically relevant species, but their splitting and cohabitation are indispensable for low-temperature kinetics.

New insights into the NH3-selective catalytic reduction of NO over Cu-ZSM-5 as revealed by operando spectroscopy

To control diesel vehicle NO _x emissions, Cu-exchanged zeolites have been applied in the selective catalytic reduction (SCR) of NO using NH₃ as reductant. However, the harsh hydrothermal environment of tailpipe conditions causes irreversible catalyst deactivation. The aggregation of isolated Cu²⁺ brings about unselective ammonia oxidation along with the main NH₃-SCR reaction. An unusual 'dip' shaped NO conversion curve was observed in the steamed zeolite Cu-ZSM-5, resulting from the undesired NH₃ oxidation that produced NO. Here we gain further insights into the NH₃-SCR reaction and its deactivation by employing operando UV-vis diffuse reflectance spectroscopy (DRS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) on fresh and steamed zeolite Cu-ZSM-5. We found that tetragonally distorted octahedral Cu²⁺ with associated NH₃ preferentially forms during low temperature NH₃-SCR (<250 °C) in fresh Cu-ZSM-5. The high coordination number of Cu²⁺ ensures the availability for high coverage of nitrate intermediates. Whilst in the steamed Cu-ZSM-5, [Cu _x (OH)_2x-1]⁺ oligomers/clusters in pseudo-tetrahedral symmetry with coordinated NH₃ accumulated during the low-temperature NH₃-SCR reaction. These clusters presented a strong adsorption of surface NH₃ and nitrates/nitric acid at low temperatures and therefore limited the reaction between surface species in the steamed Cu-ZSM-5. Further release of NH₃ with increased reaction temperature favors NH₃ oxidation that causes the drop of NO conversion at ∼275 °C. Moreover, competitive adsorption of NH₃ and nitrates/nitric acid occurs on shared Lewis-acidic adsorption sites. Prompt removal of surface nitrates/nitric acid by NO avoids the surface blockage and tunes the selectivity by alternating nitrate-nitrite equilibrium. The formation of adsorbed NO₂ and HNO _x points to the necessity of an acid adsorbent in practical applications. The structural similarity under the NH₃-SCR reaction and unselective NH₃ oxidation confirmed the entanglement of these two reactions above 250 °C.

Revealing the Synergistic Deactivation Mechanism of Hydrothermal Aging and SO2 Poisoning on Cu/SSZ-13 under SCR Condition

In real-world application, Cu/SSZ-13 simultaneously suffers severe deactivation from hydrothermal aging and SO₂ poisoning during the periodic regeneration of diesel particulate filter (DPF). Herein, we first investigated the synergistic deactivation mechanism of hydrothermal aging and SO₂ poisoning on Cu/SSZ-13 under SCR condition. Hydrothermal aging alone induces more severe degradation of selective catalytic reduction (SCR) performance than SO₂ poisoning alone, while the presence of SO₂ during hydrothermal aging causes further worse SCR performance compared with hydrothermal aging alone. Hydrothermal aging not only damages Si-OH-Al sites, particularly in four-membered ring (4MR) of the CHA cage, but also brings the conversion of ZCuOH, leading to the formation of inactive CuO/CuAlO_x species. By contrast, SO₂ poisoning alone is more prone to promote the transformation of ZCuOH to Z₂Cu. Synergistic deactivation of hydrothermal aging and SO₂ poisoning would exacerbate the damage of Si-OH-Al sites and then the formation of CuO/CuAlO_x species. These results are expected to assist the knowledge-based catalyst design for diesel aftertreatment applications.

Mobility and Reactivity of Cu+ Species in Cu-CHA Catalysts under NH3-SCR-NOx Reaction Conditions: Insights from AIMD Simulations

The mobility of the copper cations acting as active sites for the selective catalytic reduction of nitrogen oxides with ammonia in Cu-CHA catalysts varies with temperature and feed composition. Herein, the migration of [Cu(NH₃)₂]⁺ complexes between two adjacent cavities of the chabazite structure, including other reactant molecules (NO, O₂, H₂O, and NH₃), in the initial and final cavities is investigated using ab initio molecular dynamics (AIMD) simulations combined with enhanced sampling techniques to describe hopping events from one cage to the other. We find that such diffusion is only significantly hindered by the presence of excess NH₃ or NO in the initial cavity, since both reactants form with [Cu(NH₃)₂]⁺ stable intermediates which are too bulky to cross the 8-ring windows connecting the cavities. The presence of O₂ modifies strongly the interaction of NO with Cu⁺. At low temperatures, we observe NO detachment from Cu⁺ and increased mobility of the [Cu(NH₃)₂]⁺ complex, while at high temperatures, NO reacts spontaneously with O₂ to form NO₂. The present simulations give evidence for recent experimental observations, namely, an NH₃ inhibition effect on the SCR reaction at low temperatures, and transport limitations of NO and NH₃ at high temperatures. Our first principle simulations mimicking operating conditions support the existence of two different reaction mechanisms operating at low and high temperatures, the former involving dimeric Cu(NH₃)₂-O₂-Cu(NH₃)₂ species and the latter occurring by direct NO oxidation to NO₂ in one single cavity.

Investigating the role of Cu-oxo species in Cu-nitrate formation over Cu-CHA catalysts

The speciation of framework-interacting CuII sites in Cu-chabazite zeolite catalysts active in the selective catalytic reduction of NOx with NH3 is studied, to investigate the influence of the Al content on the copper structure and their reactivity towards a NO/O2 mixture. To this aim, three samples with similar Cu densities and different Si/Al ratios (5, 15 and 29) were studied using in situ X-ray absorption spectroscopy (XAS), FTIR and diffuse reflectance UV-Vis during pretreatment in O2 followed by the reaction. XAS and UV-Vis data clearly show the main presence of Z2CuII sites (with Z representing a framework negative charge) at a low Si/Al ratio, as predicted. EXAFS wavelet transform analysis showed a non-negligible fraction of proximal Z2CuII monomers, possibly stabilized into two 6-membered rings within the same cage. These sites are not able to form Cu-nitrates by interaction with NO/O2. By contrast, framework-anchored Z[CuII(NO3)] complexes with a chelating bidentate structure are formed in samples with a higher Si/Al ratio, by reaction of NO/O2 with Z[CuII(OH)] sites or structurally similar mono- or multi-copper Zx[CuIIxOy] sites. Linear combination fit (LCF) analysis of the XAS data showed good agreement between the fraction of Z[CuII(OH)]/Zx[CuIIxOy] sites formed during activation in O2 and that of Z[CuII(NO3)] complexes formed by reaction with NO/O2, further confirming the chemical inertia of Z2CuII towards these reactants in the absence of solvating NH3 molecules.

Atomically Dispersed Copper Sites in a Metal-Organic Framework for Reduction of Nitrogen Dioxide

Metal–organic framework (MOF) materials provide an excellent platform to fabricate single-atom catalysts due to their structural diversity, intrinsic porosity, and designable functionality. However, the unambiguous identification of atomically dispersed metal sites and the elucidation of their role in catalysis are challenging due to limited methods of characterization and lack of direct structural information. Here, we report a comprehensive investigation of the structure and the role of atomically dispersed copper sites in UiO-66 for the catalytic reduction of NO₂ at ambient temperature. The atomic dispersion of copper sites on UiO-66 is confirmed by high-angle annular dark-field scanning transmission electron microscopy, electron paramagnetic resonance spectroscopy, and inelastic neutron scattering, and their location is identified by neutron powder diffraction and solid-state nuclear magnetic resonance spectroscopy. The Cu/UiO-66 catalyst exhibits superior catalytic performance for the reduction of NO₂ at 25 °C without the use of reductants. A selectivity of 88% for the formation of N₂ at a 97% conversion of NO₂ with a lifetime of >50 h and an unprecedented turnover frequency of 6.1 h^–1 is achieved under nonthermal plasma activation. In situ and operando infrared, solid-state NMR, and EPR spectroscopy reveal the critical role of copper sites in the adsorption and activation of NO₂ molecules, with the formation of {Cu(I)···NO} and {Cu···NO₂} adducts promoting the conversion of NO₂ to N₂. This study will inspire the further design and study of new efficient single-atom catalysts for NO₂ abatement via detailed unravelling of their role in catalysis.

DFT study of H2 adsorption at a Cu-SSZ-13 zeolite: a cluster approach

In this work the H2 adsorption at a Cu(i)-SSZ-13 exchanged zeolite was theoretically investigated. A systematic cluster approach was used and different density functionals (B3LYP, B3LYP-D3(BJ), M06L, PBE, PBE-D3(BJ) and ωB97XD) and a def2-SVP basis set were benchmarked. In order to select the best approach to the H2 adsorption over a Cu(i)-SSZ-13 cluster with 78 atoms (16 T-sites), two main tasks were performed: (1) a comparison between theoretical and experimental structures and (2) a comparison between theoretical and experimental adsorption enthalpies. By employing the most suitable functional - the ωB97X-D - the H2 interaction with the zeolite structure was studied by means of NBO, NCI, AIM and DLPNO-CCSD(T)/LED analyses.

Review on the NO removal from flue gas by oxidation methods

Due to the increasingly strict emission standards of NOx on various industries, many traditional flue gas treatment methods have been gradually improved. Except for selective catalytic reduction (SCR) and selective non-catalytic reduction (SNCR) methods to remove NOx from flue gas, theoxidation method is paying more attention to NOx removal now because of the potential to simultaneously remove multiple pollutants from flue gas. This paper summarizes the efficiency, reaction conditions, effect factors, and reaction mechanism of NO oxidation from the aspects of liquid-phase oxidation, gas-phase oxidation, plasma technology, and catalytic oxidation. The effects of free radicals and active components of catalysts on NO oxidation and the combination of various oxidation methods are discussed in detail. The advantages and disadvantages of different oxidation methods are summarized, and the suggestions for future research on NO oxidation are put forward at the end. The review on the NO removal by oxidation methods can provide new ideas for future studies on the NO removal from flue gas.

Carbon deposition enhanced selective catalytic reduction of nitric oxide by a new catalytic process as well as increasing reducibility of catalyst

Carbon deposition usually hinders catalytic activity in one catalysis. In this work, carbon-deposition influence was investigated on selective catalytic reduction (SCR) of nitric oxide (NO) by a theoretical-experimental method. Density-functional-theory calculations showed that carbon deposition increased adsorption energy of NO on oxide. For example, adsorption energy on Fe₂O₃ increased from 1.70 to 5.27 eV. Carbon deposition increased activity by following processes: NO adsorption, NO dissociation, oxygen transmittance, CO-group formation, and N₂/CO₂ evolutions. Among these stages, CO-group formation was a key step. Based on these computational predictions, an experimental SCR was carried out for the verification. As a result, a carbon-deposited catalyst had a better SCR activity (20% higher) than the corresponding oxide catalyst. Characterizations showed that carbon deposition increased the amounts of medium/strong acidic sites as well as the reducibility of the catalytic center. The main result of this article helps to understand the interface behavior of carbon on a catalyst during SCR. Above results are also in favor of designing a more effective SCR reactor to ensure a more stable running.

Selective catalytic reduction of NO with NH3 over Cu-exchanged CHA, GME, and AFX zeolites: a density functional theory study

Density functional theory calculations have been applied to study the selectivity caused by the cage size during the selective catalytic reduction of NO by NH₃ over the Cu-exchanged zeolites with cha, gme, and aft cages.

Recent Understanding of Low-Temperature Copper Dynamics in Cu-Chabazite NH3-SCR Catalysts

Dynamic motion of NH3-solvated Cu sites in Cu-chabazite (Cu-CHA) zeolites, which are the most promising and state-of-the-art catalysts for ammonia-assisted selective reduction of NOx (NH3-SCR) in the aftertreatment of diesel exhausts, represents a unique phenomenon linking heterogeneous and homogeneous catalysis. This review first summarizes recent advances in the theoretical understanding of such low-temperature Cu dynamics. Specifically, evidence of both intra-cage and inter-cage Cu motions, given by ab initio molecular dynamics (AIMD) or metadynamics simulations, will be highlighted. Then, we will show how, among others, synchrotron-based X-ray spectroscopy, vibrational and optical spectroscopy (diffuse reflection infrared Fourier transform spectroscopy (DRIFTS) and diffuse reflection ultraviolet-visible spectroscopy (DRUVS)), electron paramagnetic spectroscopy (EPR), and impedance spectroscopy (IS) can be combined and complement each other to follow the evolution of coordinative environment and the local structure of Cu centers during low-temperature NH3-SCR reactions. Furthermore, the essential role of Cu dynamics in the tuning of low-temperature Cu redox, in the preparation of highly dispersed Cu-CHA catalysts by solid-state ion exchange method, and in the direct monitoring of NH3 storage and conversion will be presented. Based on the achieved mechanistic insights, we will discuss briefly the new perspectives in manipulating Cu dynamics to improve low-temperature NH3-SCR efficiency as well as in the understanding of other important reactions, such as selective methane-to-methanol oxidation and ethene dimerization, catalyzed by metal ion-exchanged zeolites.

Theoretical and Spectroscopic Evidence of the Dynamic Nature of Copper Active Sites in Cu-CHA Catalysts under Selective Catalytic Reduction (NH3-SCR-NOx) Conditions

The dynamic nature of the copper cations acting as active sites for selective catalytic reduction of nitrogen oxides with ammonia is investigated using a combined theoretical and spectroscopic approach. Ab initio molecular dynamics simulations of Cu-CHA catalysts in contact with reactants and intermediates at realistic operating conditions show that only ammonia is able to release Cu⁺ and Cu²⁺ cations from their positions coordinated to the zeolite framework, forming mobile Cu⁺(NH₃)₂ and Cu²⁺(NH₃)₄ complexes that migrate to the center of the cavity. Herein, we give evidence that such mobilization of copper cations modifies the vibrational fingerprint in the 800-1000 cm^-1 region of the IR spectra. Bands associated with the lattice asymmetric T-O-T vibrations are perturbed by the presence of coordinated cations, and allow one to experimentally follow the dynamic reorganization of the active sites at operating conditions.

Deactivation of Cu-Exchanged Automotive-Emission NH3 -SCR Catalysts Elucidated with Nanoscale Resolution Using Scanning Transmission X-ray Microscopy

To gain insight into the underlying mechanisms of catalyst durability for the selective catalytic reduction (SCR) of NOx with an ammonia reductant, we employed scanning transmission X-ray microscopy (STXM) to study Cu-exchanged zeolites with the CHA and MFI framework structures before and after simulated 135 000-mile aging. X-ray absorption near-edge structure (XANES) measurements were performed at the Al K- and Cu L-edges. The local environment of framework Al, the oxidation state of Cu, and geometric changes were analyzed, showing a multi-factor-induced catalytic deactivation. In Cu-exchanged MFI, a transformation of CuII to CuI and Cux Oy was observed. We also found a spatial correlation between extra-framework Al and deactivated Cu species near the surface of the zeolite as well as a weak positive correlation between the amount of CuI and tri-coordinated Al. By inspecting both Al and Cu in fresh and aged Cu-exchanged zeolites, we conclude that the importance of the preservation of isolated CuII sites trumps that of Brønsted acid sites for NH3 -SCR activity.

Propene oxidation catalysis and electronic structure of M55 particles (M = Pd or Rh): differences and similarities between Pd55 and Rh55

Propene oxidation is one of the important reactions that occurs in the presence of a three-way catalyst but its reaction mechanism is unclear. The reaction mechanisms and differences in catalysis between Pd and Rh particles were investigated by DFT calculations employing Pd₅₅ and Rh₅₅ as the model catalysts. The O-attack mechanism, in which the O atom adsorbed on the Pd₅₅ and Rh₅₅ surfaces attacks the C[double bond, length as m-dash]C double bond of propene, needs to overcome a large activation barrier (E_a). On the other hand, C-H bond cleavage of the methyl group of propene easily occurs with moderate E_a; the mechanism initiated by this C-H activation is named H-transfer mechanism. In this mechanism, the next step is allyl alcohol formation, followed by the second C-H bond activation of the CH₂OH species of allyl alcohol, and the final step is proton transfer from OH-substituted π-allyl species to the OH group on the metal surface to yield acrolein and water molecules with the regeneration of M₅₅. The rate-determining step is the second C-H bond activation. Its E_a is 17.4 kcal mol^-1 for the reaction on Pd₅₅ and 34.4 kcal mol^-1 for the reaction on Rh₅₅. These results indicate that Pd particles are more active than Rh particles in propene oxidation, which agrees with the experimental findings. The larger E_a for Rh₅₅ than that for Pd₅₅ arises from the stronger Rh-OH bond than the Pd-OH bond. The higher energy d-valence band-top of Rh₅₅ than that of Pd₅₅ is the origin of the stronger Rh-OH bond than the Pd-OH bond. Thus, the d-valence band-top energy is an important property for understanding and designing catalysts for alkene oxidation.

Promoting effects of water on the NH3-SCR reaction over Cu-SAPO-34 catalysts: transient and permanent influences on Cu species

Cu-SAPO-34 catalysts with varied Cu loadings were synthesized through ion exchange to study the influence of water on the NH3-SCR reaction. The catalytic activities were evaluated by selective catalytic reduction of NO under a reactant feed in the presence/absence of water. Transient experiments were designed to study the response of NO conversion to the presence of water. H2-TPR and DFT calculations were performed to study the reducibility of Cu species. NH3-TPD and XPS were conducted to reveal the migration of Cu species. The results show that water could remarkably improve NO reduction activities and the promoting effect is more significant on the catalyst with low Cu loading. Both transient and permanent influences were found in this promoting phenomenon. For the transient influence, water has been proved to accelerate the re-oxidation half-cycle. Moreover, water can enhance the promoting effect of the SCR feed on the migration of Cu species. These unanchored Cu ions migrate to defect sites to form active sites, which lead to a permanent influence of water.

Detection of key transient Cu intermediates in SSZ-13 during NH3-SCR deNO x by modulation excitation IR spectroscopy

The small pore zeolite Cu-SSZ-13 is an efficient material for the standard selective catalytic reduction of nitrogen oxides (NO _x ) by ammonia (NH₃). In this work, Cu-SSZ-13 has been studied at 250 °C under high conversion using a modulation excitation approach and analysed with phase sensitive detection (PSD). While the complementary X-ray absorption near edge structure (XANES) spectroscopy measurements showed that the experiments were performed under cyclic Cu⁺/Cu²⁺ redox, Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) experiments provide spectroscopic evidence for previously postulated intermediates Cu-N([double bond, length as m-dash]O)-NH₂ and Cu-NO₃ in the NH₃-SCR deNO _x mechanism and for the role of [Cu²⁺(OH^-)]⁺. These results therefore help in building towards a more comprehensive understanding of the reaction mechanism which to date has only been postulated in silico.