Mott–Schottky Effect Leads to Alkyne Semihydrogenation over Pd-Nanocube@N-Doped Carbon

Effective Bidirectional Mott-Schottky Catalysts Derived from Spent LiFePO4 Cathodes for Robust Lithium-Sulfur Batteries

It is deemed as a tough yet profound project to comprehensively cope with a range of detrimental problems of lithium-sulfur batteries (LSBs), mainly pertaining to the shuttle effect of lithium polysulfides (LiPSs) and sluggish sulfur conversion. Herein, a Co2P-Fe2P@N-doped carbon (Co2P-Fe2P@NC) Mott-Schottky catalyst is introduced to enable bidirectionally stimulated sulfur conversion. This catalyst is prepared by simple carbothermal reduction of spent LiFePO4 cathode and LiCoO2. The experimental and theoretical calculation results indicate that thanks to unique surface/interface properties derived from the Mott-Schottky effect, full anchoring of LiPSs, mediated Li2S nucleation/dissolution, and bidirectionally expedited "solid⇌liquid⇌solid" kinetics can be harvested. Consequently, the S/Co2P-Fe2P@NC manifests high reversible capacity (1569.9 mAh g-1), superb rate response (808.9 mAh g-1 at 3C), and stable cycling (a low decay rate of 0.06% within 600 cycles at 3C). Moreover, desirable capacity (5.35 mAh cm-2) and cycle stability are still available under high sulfur loadings (4-5 mg cm-2) and lean electrolyte (8 µL mg-1) conditions. Furthermore, the as-proposed universal synthetic route can be extended to the preparation of other catalysts such as Mn2P-Fe2P@NC from spent LiFePO4 and MnO2. This work unlocks the potential of carbothermal reduction phosphating to synthesize bidirectional catalysts for robust LSBs.

A carbon-promoted galvanic replacement method to synthesize efficient PdNi nanoalloy catalyst

PdNi nanoalloy catalysts were prepared by a carbon-promoted galvanic replacement method. Characterizations and control experiments show the increased replacement rate of metal Ni with Pd2+ ion can be attributed to the higher electrode potential and smaller crystalline sizes caused by carbon doping. Introduction of carbon (C) into Ni particles not only accelerates the formation process of PdNi nanoalloys, but also enables C atoms to successfully enter the lattice interstices of PdNi nanoalloys. C regulates the surface electronic properties of PdNi nanoalloys by the electron transfer between different elements and improves their activity. The PdNi@C-650 exhibits extraordinary activity and long-term stability for hydrogenation reduction of hexavalent chromium (Cr (VI)) and hydrodechlorination of chlorophenols in comparison with PdNi/CNTs (carbon nanotubes) and commercial Pd/C. Density functional theory calculations together with investigations of mechanism reveal that the high electron-deficient PdNi nanoalloys from the redistribution of electron between Ni, Pd and C of the PdNi@C-650 promote the surface adsorption of substrate molecules and H2, which accordingly enhances the hydrogenation activity. This study brings a new method for the design and preparation of high active noble metal nanoalloy.

Lattice Strain and Mott-Schottky Effect of the Charge-Asymmetry Pd1Fe Single-Atom Alloy Catalyst for Semi-Hydrogenation of Alkynes with High Efficiency

The ideal interface design between the metal and substrate is crucial in determining the overall performance of the alkyne semihydrogenation reaction. Single-atom alloys (SAAs) with isolated dispersed active centers are ideal media for the study of reaction effects. Herein, a charge-asymmetry "armor" SAA (named Pd1Fe SAA@PC), which consists of a Pd1Fe alloy core and a semiconducting P-doped C (PC) shell, is rationally designed as an ideal catalyst for the selective hydrogenation of alkynes with high efficiency. Multiple spectroscopic analyses and density functional theory calculations have demonstrated that Pd1Fe SAA@PC is dual-regulated by lattice tensile and Schottky effects, which govern the selectivity and activity of hydrogenation, respectively. (1) The PC shell layer applied an external traction force causing a 1.2% tensile strain inside the Pd1Fe alloy to increase the reaction selectivity. (2) P doping into the C-shell layer realized a transition from a p-type semiconductor to an n-type semiconductor, thereby forming a unique Schottky junction for advancing alkyne semihydrogenation activity. The dual regulation of lattice strain and the Schottky effect ensures the excellent performance of Pd1Fe SAA@PC in the semihydrogenation reaction of phenylethylene, achieving a conversion rate of 99.9% and a selectivity of 98.9% at 4 min. These well-defined interface modulation strategies offer a practical approach for the rational design and performance optimization of semihydrogenation catalysts.

Schottky Barrier-Based Built-In Electric Field for Enhanced Tumor Photodynamic Therapy

Photodynamic therapy's antitumor efficacy is hindered by the inefficient generation of reactive oxygen species (ROS) due to the photogenerated electron-hole pairs recombination of photosensitizers (PS). Therefore, there is an urgent need to develop efficient PSs with enhanced carrier dynamics. Herein, we designed Schottky junctions composed of cobalt tetroxide and palladium nanocubes (Co3O4@Pd) with a built-in electric field as effective PS. The built-in electric field enhanced photogenerated charge separation and migration, resulting in the generation of abundant electron-hole pairs and allowing effective production of ROS. Thanks to the built-in electric field, the photocurrent intensity and carrier lifetime of Co3O4@Pd were approximately 2 and 3 times those of Co3O4, respectively. Besides, the signal intensity of hydroxyl radical and singlet oxygen increased to 253.4% and 135.9%, respectively. Moreover, the localized surface plasmon resonance effect of Pd also enhanced the photothermal conversion efficiency of Co3O4@Pd to 40.50%. In vitro cellular level and in vivo xenograft model evaluations demonstrated that Co3O4@Pd could generate large amounts of ROS, trigger apoptosis, and inhibit tumor growth under near-infrared laser irradiation. Generally, this study reveals the contribution of the built-in electric field to improving photodynamic performance and provides new ideas for designing efficient inorganic PSs.

Aromatic Ethers Induced Electronic Structure Reconstruction on Encapsulated Nickel Catalysts for High-Performance Catalytic Hydrogenation

Carbon-encapsulated metal (CEM) catalysts effectively address supported metal catalyst instability by protecting the active metal with a shell. However, mass transfer limitations lead to reduced activity for catalytic hydrogenation reaction over most CEM catalysts. Herein, we introduce a dopant strategy aimed at incorporating nickel metal within graphene-like shells (GLS) featuring oxygen-containing functional groups (OFGs). The core of this strategy involves precise control of GLS modification and the demonstrated pivotal influence of aromatic ether linkages (═C-O-C) in GLS for significant enhancement of catalytic performance. The introduction of ═C-O-C into GLS with stability was beneficial to improve the work function of the catalyst and promoted electron transmission from Ni metal core to GLS, further elevating the catalytic activity, based on the Mott-Schottky effect. In addition, the experimental characterization and density functional theory (DFT) calculations showcased that the ═C-O-C reconstructed the electronic state of GLS, imparting it highly specific for the adsorption of hydrogen and para-chloronitrobenzene (p-CNB) to obtain para-chloroaniline (p-CAN) with high selectivity. This work manifested a feasible direction for the precise modulation and design of the OFGs in CEM catalysts to achieve highly efficient catalytic hydrogenation.

Design of Hollow Nanoreactors for Size- and Shape-Selective Catalytic Semihydrogenation Driven by Molecular Recognition

Mimicking the structures and functions of cells to create artificial organelles has spurred the development of efficient strategies for production of hollow nanoreactors with biomimetic catalytic functions. However, such structure are challenging to fabricate and are thus rarely reported. We report the design of hollow nanoreactors with hollow multishelled structure (HoMS) and spatially loaded metal nanoparticles. Starting from a molecular-level design strategy, well-defined hollow multishelled structure phenolic resins (HoMS-PR) and carbon (HoMS-C) submicron particles were accurately constructed. HoMS-C serves as an excellent, versatile platform, owing to its tunable properties with tailored functional sites for achieving precise spatial location of metal nanoparticles, internally encapsulated (Pd@HoMS-C) or externally supported (Pd/HoMS-C). Impressively, the combination of the delicate nanoarchitecture and spatially loaded metal nanoparticles endow the pair of nanoreactors with size-shape-selective molecular recognition properties in catalytic semihydrogenation, including high activity and selectivity of Pd@HoMS-C for small aliphatic substrates and Pd/HoMS-C for large aromatic substrates. Theoretical calculations provide insight into the pair of nanoreactors with distinct behaviors due to the differences in energy barrier of substrate adsorption. This work provides guidance on the rational design and accurate construction of hollow nanoreactors with precisely located active sites and a finely modulated microenvironment by mimicking the functions of cells.

Mott-Schottky MXene@WS2 Heterostructure: Structural and Thermodynamic Insights and Application in Ultra Stable Lithium-Sulfur Batteries

Due to the "shuttle effect" and low conversion kinetics of polysulfides, the cycle stability of lithium sulfur (Li-S) battery is unsatisfactory, which hinders its practical application. The Mott-Schottky heterostructures for Li-S batteries not only provide more catalytic/adsorption active sites, but also facilitate electrons transport by a built-in electric field, which are both beneficial for polysulfides conversion and long-term cycle stability. Here, MXene@WS2 heterostructure was constructed by in-situ hydrothermal growth for separator modification. In-depth ultraviolet photoelectron spectroscopy and ultraviolet visible diffuse reflectance spectroscopy analysis reveals that there is an energy band difference between MXene and WS2 , confirming the heterostructure nature of MXene@WS2 . DFT calculations indicate that the Mott-Schottky MXene@WS2 heterostructure can effectively promote electron transfer, improve the multi-step cathodic reaction kinetics, and further enhance polysulfides conversion. The built-in electric field of the heterostructure plays an important role in reducing the energy barrier of polysulfides conversion. Thermodynamic studies reveal the best stability of MXene@WS2 during polysulfides adsorption. As a result, the Li-S battery with MXene@WS2 modified separator exhibits high specific capacity (1613.7 mAh g-1 at 0.1 C) and excellent cycling stability (2000 cycles with 0.0286 % decay per cycle at 2 C). Even at a high sulfur loading of 6.3 mg cm-2 , the specific capacity could be retained by 60.0 % after 240 cycles at 0.3 C. This work provides deep structural and thermodynamic insights into MXene@WS2 heterostructure and its promising prospect of application in high performance Li-S batteries.

Enhancing Photocatalytic-Transfer Semi-Hydrogenation of Alkynes Over Pd/C3 N4 Through Dual Regulation of Nitrogen Defects and the Mott-Schottky Effect

The selective hydrogenation of alkynes is an important reaction; however, the catalytic activity and selectivity in this reaction are generally conflicting. In this study, ultrafine Pd nanoparticles (NPs) loaded on a graphite-like C3 N4 structure with nitrogen defects (Pd/DCN) are synthesized. The resulting Pd/DCN exhibits excellent photocatalytic performance in the transfer hydrogenation of alkynes with ammonia borane. The reaction rate and selectivity of Pd/DCN are superior to those of Pd/BCN (bulk C3 N4 without nitrogen defects) under visible-light irradiation. The characterization results and density functional theory calculations show that the Mott-Schottky effect in Pd/DCN can change the electronic density of the Pd NPs, and thus enhances the hydrogenation selectivity toward phenylacetylene. After 1 h, the hydrogenation selectivity of Pd/DCN reaches 95%, surpassing that of Pd/BCN (83%). Meanwhile, nitrogen defects in the supports improve the visible-light response and accelerate the transfer and separation of photogenerated charges to enhance the catalytic activity of Pd/DCN. Therefore, Pd/DCN exhibits higher efficiency under visible light, with a turnover frequency (TOF) of 2002 min-1 . This TOF is five times that of Pd/DCN under dark conditions and 1.5 times that of Pd/BCN. This study provides new insights into the rational design of high-performance photocatalytic transfer hydrogenation catalysts.

Construction of N-Doped Carbon-Modified Ni/SiO2 Catalyst Promoting Cinnamaldehyde Selective Hydrogenation

At present, the selective hydrogenation of α, β-unsaturated aldehydes remains a challenge due to competition between unsaturated functional groups (C=C and C=O). In this study, N-doped carbon deposited on silica-supported nickel Mott-Schottky type catalysts (Ni/SiO₂@N_xC) was prepared for the selective hydrogenation of cinnamaldehyde (CAL) by using the respective hydrothermal method and high-temperature carbonization method. The prepared optimal Ni/SiO₂@N₇C catalyst achieved 98.9% conversion and 83.1% selectivity for 3-phenylpropionaldehyde (HCAL) in the selective hydrogenation reaction of CAL. By constructing the Mott-Schottky effect, the electron transfer from metallic Ni to N-doped carbon at their contact interface was promoted, and the electron transfer was demonstrated by XPS and UPS. Experimental results indicated that by modulating the electron density of metallic Ni, the catalytic hydrogenation of C=C bonds was preferentially performed to obtain higher HCAL selectivity. Meanwhile, this work also provides an effective way to design electronically adjustable type catalysts for more selective hydrogenation reactions.

Pyridinic Nitrogen Sites Dominated Coordinative Engineering of Subnanometric Pd Clusters for Efficient Alkynes' Semihydrogenation

Supported metal catalysts have played an important role in optimizing selective semihydrogenation of alkynes for fine chemicals. There into, nitrogen-doped carbons, as a type of promising support materials, have attracted extensive attentions. However, due to the general phenomenon of random doping for nitrogen species in the support, it is still atremendous challenge to finely identify which nitrogen configuration dominates the catalytic property of alkynes' semihydrogenation. Herein, it is reported that uniform mesoporous N-doped carbon spheres derived from mesoporous polypyrrole spheres are used as supports to immobilized subnanometric Pd clusters, which provide a particular platform to research the influence of nitrogen configurations on the alkynes' semihydrogenation. Comprehensive experimental results and density functional theory calculation indicate that pyridinic nitrogen configuration dominates the catalytic behavior of Pd clusters. The high contents of pyridinic nitrogen sites offer abundant coordination sites, which greatly reduces the energy barrier of the rate-determining reaction step and makes Pd clusters own high catalytic activity. The electron effect between pyridinic nitrogen sites and Pd clusters makes the reaction highly selective. Additionally, the good mesostructures also promote the fast transport of substrate. Based on the above, catalyst Pd@PPy-600 exhibits high catalytic activity (99%) and selectivity (96%) for phenylacetylene (C₈ H₆ ) semihydrogenation.

Construction of a Co/MnO Mott-Schottky Heterostructure to Achieve Interfacial Synergy in the Oxygen Reduction Reaction for Aluminum-Air Batteries

The rational design of non-noble metal-based electrocatalysts for an efficient oxygen reduction reaction (ORR) is an important research topic to promote the advancement of aluminum-air batteries. In this work, heterostructural Co/MnO nanoparticles encapsulated in a N-doped carbon electrocatalyst were prepared via one-step pyrolysis utilizing different reduction potentials of Co and Mn ions, and the heterointerface between the two phases was confirmed. The prepared catalyst displays Pt/C competitive ORR performance because of the interfacial synergy of a Co/MnO Mott-Schottky (M-S) heterostructure, which leads to boosted conductivity, formation of an M-S barrier, and a reduced oxygen reduction energy barrier for excited electrons. Furthermore, the Co/MnO-based aluminum-air battery displays good discharge performance, demonstrating good feasibility for practical application.

Design of the Synergistic Rectifying Interfaces in Mott-Schottky Catalysts

The functions of interfacial synergy in heterojunction catalysts are diverse and powerful, providing a route to solve many difficulties in energy conversion and organic synthesis. Among heterojunction-based catalysts, the Mott-Schottky catalysts composed of a metal-semiconductor heterojunction with predictable and designable interfacial synergy are rising stars of next-generation catalysts. We review the concept of Mott-Schottky catalysts and discuss their applications in various realms of catalysis. In particular, the design of a Mott-Schottky catalyst provides a feasible strategy to boost energy conversion and chemical synthesis processes, even allowing realization of novel catalytic functions such as enhanced redox activity, Lewis acid-base pairs, and electron donor-acceptor couples for dealing with the current problems in catalysis for energy conversion and storage. This review focuses on the synthesis, assembly, and characterization of Schottky heterojunctions for photocatalysis, electrocatalysis, and organic synthesis. The proposed design principles, including the importance of constructing stable and clean interfaces, tuning work function differences, and preparing exposable interfacial structures for designing electronic interfaces, will provide a reference for the development of all heterojunction-type catalysts, electrodes, energy conversion/storage devices, and even super absorbers, which are currently topics of interest in fields such as electrocatalysis, fuel cells, CO₂ reduction, and wastewater treatment.

Water oxidation couples to electrocatalytic hydrogenation of carbonyl compounds and unsaturated carbon–carbon bonds by nickel

Artificial photosynthesis, an umbrella term, is a chemical process that biomimetics natural photosynthesis. In natural photosynthesis, electrons from the water-oxidation reaction are used for carbon dioxide reduction. Herein, we report the reducion of aldehydes and ketones to corresponding alcohols in a simple undivided cell. This reaction utilized inexpensive nickel foam electrodes (1 cm2) and LiClO4 (0.05 M) as a commercially accessible electrolyte in an aqueous medium. Under electrochemical conditions, a series of alcohols (21 examples) produces high selectivity in good yields (up to 100%). Usage the current method, 10 mmol (1060 mg) of benzaldehyde is also successfully reduced to benzyl alcohol (757 mg, 70% isolated yield) without any by‑products. This route to alcohols matched several green chemistry principles: (a) atom economy owing to the use of H2O as the solvent and the source of hydrogen, (b) elimination of the homogeneous metal catalyst, (c) use of smooth reaction conditions, (d) waste inhibition due to low volumetric of by-products, and (e) application of safe EtOH co-solvent. Moreover, the ability of the system to operate with alkyne and alkene compounds enhanced the practical efficiency of this process.

Multilevel Hollow Phenolic Resin Nanoreactors with Precise Metal Nanoparticles Spatial Location toward Promising Heterogeneous Hydrogenations

Hollow nanostructures with fascinating properties have inspired numerous interests in broad research fields. Cell-mimicking complex hollow architectures with precise active components distributions are particularly important, while their synthesis remains highly challenging. Herein, a "top-down" chemical surgery strategy is introduced to engrave the 3-aminophenol formaldehyde resin (APF) spheres at nanoscale. Undergoing the cleavage of (Ar)CN bonds with ethanol as chemical scissors and subsequent repolymerization process, the Solid APF transform to multilevel hollow architecture with precise nanospatial distribution of organic functional groups (e.g., hydroxymethyl and amine). The transformation is tracked by electron microscopy and solid-state nuclear magnetic resonance techniques, the category and dosage of alcohol are pivotal for constructing multilevel hollow structures. Moreover, it is demonstrated the evolution of nanostructures accompanied with unique organic microenvironments is able to accurately confine multiple gold (Au) nanoparticles, leading to the formation of pomegranate-like particles. Through selectively depositing palladium (Pd) nanoparticles onto the outer shell, bimetallic Au@APF@Pd catalysts are formed, which exhibit excellent hydrogenation performance with turnover frequency (TOF) value up to 11257 h^-1 . This work provides an effective method for precisely manipulating the nanostructure and composition of polymers at nanoscale and sheds light on the design of catalysts with precise spatial active components.

Facile fabrication of highly dispersed Pd catalyst on nanoporous chitosan and its application in environmental catalysis

With the development of society, the problem of environmental pollution is becoming increasingly serious, such as the typical pollution of nitro compounds or dyes in wastewater. An effective strategy to remove these organic pollutants is catalytic conversion, including converting them into more chemically valuable compounds. Herein, a nanoporous chitosan microsphere derived from seafood waste resources of chitin was constructed via sol-gel method, which was used as supports to successfully fabricate a highly dispersed Pd nano-catalyst (mean diameter ~ 1.8 nm) via a facile way based on its interconnected nanoporous structure and rich functional -OH/-NH₂ groups. The synthetic catalyst was applied to the hydrogenation of toxic nitro compounds, which could efficiently and selectively catalyze the conversion of nitro compounds. The catalyst was also used for the degradation of some representative dyes, which also showed good activity and stability, suggesting potential of applications in green environmental governance.

Advanced Carbon-Based Nanocatalysts and their Application in Catalytic Conversion of Renewable Platform Molecules

The transformation of renewable platform molecules to produce value-added fuels and fine-chemicals is a promising strategy to sustainably meet future demands. Owing to their finely modified electronic and geometric properties, carbon-based nanocatalysts have shown great capability to regulate their catalytic activity and stability. Their well-defined and uniform structures also provide both the opportunity to explore intrinsic reaction mechanisms and the site-requirement for valorization of renewable platform molecules to advanced fuels and chemicals. This Review highlights the progress achieved in carbon-based nanocatalysts, mainly by using effective regulation approaches such as heteroatom anchoring, bimetallic synergistic effects, and carbon encapsulation to enhance catalyst performance and stability, and their applications in renewable platform molecule transformations. The foundation for understanding the structure-performance relationship of carbon-based catalysts has been established by investigating the effect of these regulation methods on catalyst performance. Finally, the opportunities, challenges and potential applications of carbon-based nanocatalysts are discussed.

In-Plane Mott-Schottky Effects Enabling Efficient Hydrogen Evolution from Mo5 N6 -MoS2 Heterojunction Nanosheets in Universal-pH Electrolytes

Cost-effective electrocatalysts for the hydrogen evolution reaction (HER) spanning a wide pH range are highly desirable but still challenging for hydrogen production via electrochemical water splitting. Herein, Mo₅ N₆ -MoS₂ heterojunction nanosheets prepared on hollow carbon nanoribbons (Mo₅ N₆ -MoS₂ /HCNRs) are designed as Mott-Schottky electrocatalysts for efficient pH-universal HER. The in-plane Mo₅ N₆ -MoS₂ Mott-Schottky heterointerface induces electron redistribution and a built-in electric field, which effectively activates the inert MoS₂ basal planes to intrinsically increase the electrocatalytic activity, improve electronic conductivity, and boost water dissociation activity. Moreover, the vertical Mo₅ N₆ -MoS₂ nanosheets provide more activated sites for the electrochemical reaction and facilitate mass/electrolyte transport, while the tightly coupled HCNRs substrate and metallic Mo₅ N₆ provide fast electron transfer paths. Consequently, the Mo₅ N₆ -MoS₂ /HCNRs electrocatalyst delivers excellent pH-universal HER performances exemplified by ultralow overpotentials of 57, 59, and 53 mV at a current density of 10 mA cm^-2 in acidic, neutral, and alkaline electrolytes with Tafel slopes of 38.4, 43.5, and 37.9 mV dec^-1 , respectively, which are superior to those of the reported MoS₂ -based catalysts and outperform Pt in overall water splitting. This work proposes a new strategy to construct an in-plane heterointerface on the nanoscale and provides fresh insights into the HER electrocatalytic mechanism of MoS₂ -based heterostructures.

Efficient Reduction of Cr (VI) to Cr (III) over a TiO2-Supported Palladium Catalyst Using Formic Acid as a Reductant

Cr (VI) has been considered to be a harmful environmental pollutant due to its toxicity, mobility and strong oxidation. It has become challenging to remove Cr (VI) from wastewater. In this work, a series of supported palladium-based catalysts were synthesized via a facile wet chemical reduction method. Among all the as-synthesized catalysts, Pd/TiO2 (P25) showed the optimized catalytic activity for the reduction of Cr (VI) to Cr (III) using formic acid (HCOOH) as the reductant. More than 99% of K2Cr2O7 (50 mg/L) was reduced completely within 30 min at 25 °C. The structural properties of the Pd/TiO2 catalyst (such as particle size, hydrophilicity and stability) and the synergistic effect of metal and support played significant roles in the reduction of Cr (VI) to Cr (III). Meanwhile, several pivotal parameters such as Cr (VI) concentration, catalyst loading, HCOOH concentration and temperature were investigated in detail. Furthermore, this catalyst was also active for the reduction of nitro compounds with HCOOH as the reductant at room temperature. Finally, the reasonable reaction mechanism of the Pd/TiO2/HCOOH system for the reduction of Cr (VI) to Cr (III) was put forward.

State-of-the-Art Advancements in Photocatalytic Hydrogenation: Reaction Mechanism and Recent Progress in Metal-Organic Framework (MOF)-Based Catalysts

Photocatalytic hydrogenation provides an effective alternative way for the synthesis of industrial chemicals to meet the economic and environment expectations. Especially, over the past few years, metal-organic frameworks (MOFs), featured with tunable structure, porosity, and crystallinity, have been significantly developed as many high-performance catalysts in the field of photocatalysis. In this review, the background and development of photocatalytic hydrogenation are systemically summarized. In particular, the comparison between photocatalysis and thermal catalysis, and the fundamental understanding of photohydrogenation, including reaction pathways, reducing species, regulation of selectivity, and critical parameters of light, are proposed. Moreover, this review highlights the advantages of MOFs-based photocatalysts in the area of photohydrogenation. Typical effective strategies for modifying MOFs-based composites to produce their advantages are concluded. The recent progress in the application of various types of MOFs-based photocatalysts for photohydrogenation of unsaturated organic chemicals and carbon dioxide (CO2 ) is summarized and discussed in detail. Finally, a brief conclusion and personal perspective on current challenges and future developments of photocatalytic hydrogenation processes and MOFs-based photocatalysts are also highlighted.

Unraveling High Alkene Selectivity at Full Conversion in Alkyne Hydrogenation over Ni under Continuous Flow Conditions

Selective hydrogenation of alkynes into alkenes in continuous flow conditions over non-precious metal catalysts is an attractive prospect for the chemical industry, especially for the petrochemical and polymer industry. Achieving...

Interfacial Electronic Effects in Co@N-Doped Carbon Shells Heterojunction Catalyst for Semi-Hydrogenation of Phenylacetylene

Metal-supported catalyst with high activity and relatively simple preparation method is given priority to industrial production. In this work, this study reported an easily accessible synthesis strategy to prepare Mott-Schottky-type N-doped carbon encapsulated metallic Co (Co@N_p+gC) catalyst by high-temperature pyrolysis method in which carbon nitride (g-C₃N₄) and dopamine were used as support and nitrogen source. The prepared Co@N_p+gC presented a Mott-Schottky effect; that is, a strong electronic interaction of metallic Co and N-doped carbon shell was constructed to lead to the generation of Mott-Schottky contact. The metallic Co, due to high work function as compared to that of N-doped carbon, transferred electrons to the N-doped outer shell, forming a new contact interface. In this interface area, the positive and negative charges were redistributed, and the catalytic hydrogenation mainly occurred in the area of active charges. The Co@N_p+gC catalyst showed excellent catalytic activity in the hydrogenation of phenylacetylene to styrene, and the selectivity of styrene reached 82.4%, much higher than those of reference catalysts. The reason for the promoted semi-hydrogenation of phenylacetylene was attributed to the electron transfer of metallic Co, as it was caused by N doping on carbon.

Interwrapping Distinct Metal-Organic Frameworks in Dual-MOFs for the Creation of Unique Composite Catalysts

Incorporating metal nanoparticles (MNPs) inside metal-organic frameworks (MOFs) demonstrates superior catalytic properties in numerous reactions; however, the size and distribution of MNPs could not be well controlled, resulting in low product selectivity in catalysis by undergoing different catalytic reaction pathways. We report herein a facile strategy for integrating lattice-mismatched MOFs together to fabricate homogeneously distributed “dual-MOFs,” which are the ideal precursors for the preparation of MNPs@MOFs with unique catalytic properties. As a proof of concept, we successfully synthesize a dual-MOF HKUST-1/ZIF-8 for in situ creation of redox-active Cu NPs inside hierarchical porous ZIF-8 under controlled pyrolytic conditions. Combining the advantages of size-tunable Cu NPs in the molecular sieving matrix of ZIF-8, Cu@ZIF-8 demonstrates high activity and selectivity for transformation of alkynes into alkenes without overhydrogenation, which surpasses most of the catalysts in the literature. Therefore, this work paves a new pathway for developing highly efficient and selective heterogeneous catalysts to produce highly value-added chemicals.

Manipulating Redox Kinetics of Sulfur Species Using Mott-Schottky Electrocatalysts for Advanced Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries suffer from sluggish sulfur redox reactions under high-sulfur-loading and lean-electrolyte conditions. Herein, a typical Co@NC heterostructure composed of Co nanoparticles and a semiconductive N-doped carbon matrix is designed as a model Mott-Schottky catalyst to exert the electrocatalytic effect on sulfur electrochemistry. Theoretical and experimental results reveal the redistribution of charge and a built-in electric field at the Co@NC heterointerface, which are critical to lowering the energy barrier of polysulfide reduction and Li₂S oxidation in the discharge and charge process, respectively. With Co@NC Mott-Schottky catalysts, the Li-S batteries display an ultrahigh capacity retention of 92.1% and a system-level gravimetric energy density of 307.8 Wh kg^-1 under high S loading (10.73 mg cm^-2) and lean electrolyte (E/S = 5.9 μL mg_sulfur^-1) conditions. The proposed Mott-Schottky heterostructure not only deepens the understanding of the electrocatalytic effect in Li-S chemistry but also inspires a rational catalyst design for advanced high-energy-density batteries.

Optimizing the metal-support interactions at the Pd-polymer carbon nitride Mott-Schottky heterojunction interface for an enhanced electrocatalytic hydrodechlorination reaction

We reported one novel strategy via band engineering of the semiconductor support to optimize the metal-support interactions at a Mott-Schottky heterojunction interface and enhance the metal's electrocatalytic hydrodechlorination (EHDC) performance. Taking palladium-polymer carbon nitride (Pd/PCN) as a model, the band tuning of PCN by heteroatomic phosphorus (P) doping substantially boosted the EHDC of 2,4-dichlorophenol (2,4-DCP, one typical chlorinated organic pollutants (COPs)) on Pd, and a peak specific activity of 0.172 min^-1 cm_Pd^-2 was achieved by Pd/P-PCN-0.25 (0.25 reflected the P content, and denoted the mass ratio of the P source to PCN precursor used in P-PCN synthesis), quadrupling 0.041 min^-1 cm_Pd^-2 of Pd/C and outperforming most of the reported catalysts. The mechanism study revealed the P doping in PCN enabled the positive shift of its Fermi level, which weakened the Pd-PCN interactions and alleviated the electron excess of Pd in Pd/PCN. The P-PCN in Pd/P-PCN-0.25 with the ideal band structure evoked a Pd electronic state that maximized EHDC efficiency. Further investigation into the intermediate products of EHDC on Pd/P-PCN and the biological safety of the 2,4-DCP-contaminated water after EHDC treatment demonstrated the EHDC over our catalyst was environmental-benignity for COPs abatement.

Facile d-band tailoring in Sub-10 nm Pd cubes by in-situ grafting on nitrogen-doped graphene for highly efficient organic transformations

We demonstrate for the first time the in-situ synthesis of Pd nanocubes (PdNC) on nitrogen-doped reduced graphene oxide (NRGO) for facile organic transformations wherein the cubic morphology of Pd can only be realized by precision-controlled acid additions in the tune of 0.02 pH variations in the reaction medium. Due to the intimate contact arising from atom-by-atom addition of Pd on NRGO, the composite has exhibited a pronounced catalyst to support charge transfer effect, shift in the d-band center, and lowering of charge-transfer resistance when compared with PdNC-NRGO ex-situ composites prepared by mixing of the preformed components of PdNC and NRGO or PdNCs alone. The activities of these catalysts were tested for the Suzuki coupling and nitroarene reduction reactions using water as an industry-friendly solvent. In both, the in-situ deposited sample exhibited substantially higher catalytic activity as well as stability when compared with an ex-situ sample or pure PdNCs. We show that a very high turnover frequency of ~31300 h^-1 and ~900 h^-1 are achievable by using the in-situ deposited PdNC-NRGO composite for Suzuki coupling reactions and nitroarene reduction respectively, better than the state-of-the-art catalysts developed recently, in addition to high recyclability.

Engineering of Yolk/Core-Shell Structured Nanoreactors for Thermal Hydrogenations

Heterogeneous hydrogenation reactions are of great importance for chemical upgrading and synthesis, but still face the challenges of controlling selectivity and long-term stability. To improve the catalytic performance, many hydrogenation reactions utilize special yolk/core-shell nanoreactors (YCSNs) with unique architectures and advantageous properties. This work presents the developmental and technological challenges in the preparation of YCSNs that are potentially useful for hydrogenation reactions, and provides a summary of the properties of these materials. The work also addresses the scientific challenges in applications of these YCSNs in various gas and liquid-phase hydrogenation reactions. The catalyst structures, catalytic performance, structure-performance relationships, reaction mechanisms, and unsolved problems are discussed too. Also, a brief outlook and opportunities for future research in this field are presented. This work on the advancements in YCSNs might inspire the creation of new materials with desired structures for achieving maximal hydrogenation performances.

Activating palladium nanoparticles via a Mott-Schottky heterojunction in electrocatalytic hydrodechlorination reaction

This work exploited one novel power of the Mott-Schottky heterojunction interface in activating the palladium (Pd) in electrocatalytic hydrodechlorination reaction (EHDC, one reaction targeted for the abatement of chlorinated organic pollutants from water). By forming a Mott-Schottky contact with polymer carbon nitride (Pd-PCN), the Pd nanoparticles enable a relatively complete and pseudo-first-order conversion of 2,4-dichlorophenol (2,4-DCP) to phenol and Cl^- with the reaction rate constant (k_obs) triple that of the conventional Pd-C (0.68 vs. 0.26 min^-1 mol_Pd^-1). Further comparison in k_obs of Pd-PCN and the Pd catalysts reported in literatures revealed that our Pd-PCN was among the top active catalysts for EHDC. The robust performance of Pd-PCN was attributed to the strong metal-support interactions at the Mott-Schottky heterojunction interface, which enriched the electron on Pd and improved its anti-poisoning ability against phenol. The strong support-metal interactions also endowed Pd-PCN with high activity/structure stability in EHDC. The presence of some anions in water body including NO₃^-, NO₂^- and Cl^- exerted little effect on EHDC, while the reduced sulfur compounds (S^2- and SO₃^2-), even in a very low concentration (1 mM), could significantly deactivate the catalyst. This work provides a facile and efficient strategy to activate noble metals in catalytic reactions.

Transfer hydrogenation of alkynes into alkenes by ammonia borane over Pd-MOF catalysts

Ammonia borane with both hydridic and protic hydrogens in its structure acted as an efficient transfer hydrogenation agent for selective transformation of alkynes into alkenes in non-protic solvents.