Rapid, Selective Heavy Metal Removal from Water by a Metal-Organic Framework/Polydopamine Composite

3D-printed bone regeneration scaffolds modulate bone metabolic homeostasis through vascularization for osteoporotic bone defects

The treatment of osteoporotic bone defects poses a challenge due to the degradation of the skeletal vascular system and the disruption of local bone metabolism within the osteoporotic microenvironment. However, it is feasible to modulate the disrupted local bone metabolism imbalance through enhanced vascularization, a theory termed "vascularization-bone metabolic balance". This study developed a 3D-printed polycaprolactone (PCL) scaffold modified with EPLQLKM and SVVYGLR peptides (PCL-SE). The EPLQLKM peptide attracts bone marrow-derived mesenchymal stem cells (BMSCs), while the SVVYGLR peptide enhances endothelial progenitor cells (EPCs) vascular differentiation, thus regulating bone metabolism and fostering bone regeneration through the paracrine effects of EPCs. Further mechanistic research demonstrated that PCL-SE promoted the vascularization of EPCs, activating the Notch signaling pathway in BMSCs, leading to the upregulation of osteogenesis-related genes and the downregulation of osteoclast-related genes, thereby restoring bone metabolic balance. Furthermore, PCL-SE facilitated the differentiation of EPCs into "H"-type vessels and the recruitment of BMSCs to synergistically enhance osteogenesis, resulting in the regeneration of normal microvessels and bone tissues in cases of femoral condylar bone defects in osteoporotic SD rats. This study suggests that PCL-SE supports in-situ vascularization, remodels bone metabolic translational balance, and offers a promising therapeutic regimen for osteoporotic bone defects.

Bioinspired, Carbohydrate-Containing Polymers Efficiently and Reversibly Sequester Heavy Metals

Water scarcity and heavy metal pollution are significant challenges in today's industrialized world. Conventional heavy metal remediation methods are often inefficient and energy-intensive, and produce chemical sludge. To address these issues, we developed a bioinspired, carbohydrate-containing polymer system for efficient and selective heavy metal removal. Using ring opening metathesis polymerization, we synthesized polymers bearing amphiphilic glucuronate side chains capable of selectively binding heavy metal cations in mixed media. In samples containing high concentrations of heavy metals (>550 ppb), these polymers rapidly form a filterable precipitate upon metal capture, reducing the concentration of cation to <1.5 ppb within 3 min, as measured by inductively coupled plasma mass spectrometry. This system effectively removes cadmium ions from highly contaminated solutions to levels below the Agency for Toxic Substances and Disease Registry limit for Cd2+ in drinking water and selectively removes both Cd2+ and Pb2+ from lake water spiked with trace amounts of metal. Acidification triggers protonation of the glucuronate groups, releasing the heavy metals and resolubilizing the polymer. This capture-and-release process can be repeated over multiple cycles without loss of binding capacity. As such, this study introduces a novel class of recyclable materials with pH-responsive properties, offering potential for applications in water remediation and beyond.

Polysulfone membranes decorated with Fe-Mn binary oxide nanoparticles and polydopamine for enhanced arsenate/arsenite adsorptive removal

Arsenic contamination of water is a global environmental concern, and membrane technology combined with nanotechnology contributes to more efficient removal of arsenic. In this study, Fe-Mn oxide (FM), Polydopamine (PDA), and PDA-modified FM (PFM) were incorporated into polysulfone (PSF) to prepare adsorption membranes (PFMP) for arsenic removal. The prepared nanoparticles and membranes were characterized using TEM, SEM, FTIR, TGA, contact angle, and pure water flux. The introduction of particles enhanced the hydrophilicity of the membranes and significantly enhanced the pure water flux of the membranes. Adsorption experiments indicated that the PFMP membrane exhibited the best arsenic removal performance, with maximum adsorption capacities for As(III) and As(V) were 11.57 mg/g and 12.39 mg/g, respectively. The Langmuir model fitted the adsorption isotherms well, and the kinetics followed the pseudo-second-order model. The filtration experiment revealed that the PFMP membrane was capable of reducing As(III) solution (915 L/m2) and As(V) solution (1075 L/m2) from a concentration of 100 μg/L to the safe limit of As (＜10 μg/L). The As-loaded membrane was regenerated using NaOH solution (pH = 11), and the filtration experiment was repeated. FTIR and XPS demonstrated that the mechanism of the reaction between the membrane and arsenic was ligand exchange, where the arsenic ions were bonded to the oxygen ions to form Mn-O-As and Fe-O-As.

Electrocatalysis in MOF Films for Flexible Electrochemical Sensing: A Comprehensive Review

Flexible electrochemical sensors can adhere to any bendable surface with conformal contact, enabling continuous data monitoring without compromising the surface's dynamics. Among various materials that have been explored for flexible electronics, metal-organic frameworks (MOFs) exhibit dynamic responses to physical and chemical signals, offering new opportunities for flexible electrochemical sensing technologies. This review aims to explore the role of electrocatalysis in MOF films specifically designed for flexible electrochemical sensing applications, with a focus on their design, fabrication techniques, and applications. We systematically categorize the design and fabrication techniques used in preparing MOF films, including in situ growth, layer-by-layer assembly, and polymer-assisted strategies. The implications of MOF-based flexible electrochemical sensors are examined in the context of wearable devices, environmental monitoring, and healthcare diagnostics. Future research is anticipated to shift from traditional microcrystalline powder synthesis to MOF thin-film deposition, which is expected to not only enhance the performance of MOFs in flexible electronics but also improve sensing efficiency and reliability, paving the way for more robust and versatile sensor technologies.

Efficient Lead Removal by Assembly of Bio-Derived Ellagate Framework, Which Enables Electrocatalytic Reduction of CO2 to Formate

Lead (Pb) poisoning and CO2-induced global warming represent two exemplary environmental and energy issues threatening humanity. Various biomass-derived materials are reported to take up Pb and convert CO2 electrochemically into low-valent carbon species, but these works address the problems separately rather than settle the issues simultaneously. In this work, cheap, natural ellagic acid (EA) extracted from common plants is adopted to assemble a stable metal-organic framework (MOF), EA-Pb, by effective capture of Pb2+ ions in an aqueous medium (removal rate close to 99%). EA-Pb represents the first structurally well-defined Pb-based MOF showing selective electrocatalytic CO2-to-HCOO- conversion with Faradaic efficiency (FE) of 95.37% at -1.08 V versus RHE. The catalytic mechanism is studied by 13CO2 labeling, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and theoretical calculation. The use of EA-Pb as an electrocatalyst for CO2 reduction represents a 2-in-1 solution of converting detrimental wastes (Pb2+) as well as natural resources (EA) into wealth (electrocatalytic EA-Pb) for addressing the global warming issue.

Heavy-Metal Ions Removal and Iodine Capture by Terpyridine Covalent Organic Frameworks

Porous materials are excellent candidates for water remediation in environmental issues. However, it is still a key challenge to design efficient adsorbents for rapid water purification from various heavy metal ions-contaminated wastewater in one step. Here, two robust nitrogen-rich covalent organic frameworks (COFs) bearing terpyridine units on the pore walls by a "bottom-up" strategy are reported. Benefitting from the strong chelation interaction between the terpyridine units and various heavy metal ions, these two terpyridine COFs show excellent removal efficiency and capability for Pb2+, Hg2+, Cu2+, Ag+, Cd2+, Ni2+, and Cr3+ from water. These COFs are shown to remove such heavy metal ions with >90% of contents at one time after the aqueous metal ions mixture is passed through the COF filter. The nitrogen-rich features of the COFs also endow them with the capability of capturing iodine vapors, offering the terpyridine COFs the potential for environmental remediation applications.

Sulfhydryl functionalized two-dimensional Ti3C2Tx MXene for efficient removal of Hg2+ in water samples

This study describes an adsorption method for the removal of Hg2+ from aquatic environments using sulfhydryl-functionalized Ti3C2Tx (SH-Ti3C2Tx). SH-Ti3C2Tx materials were synthesized through covalent interactions between dithiothreitol and two-dimensional Ti3C2Tx. The insertion of -SH groups increased the interlayer spacing of Ti3C2Tx, resulting in a 3-fold increase in the specific surface area of SH-Ti3C2Tx compared with the original Ti3C2Tx. The maximum Hg2+ adsorption capacity of SH-Ti3C2Tx was 3042 mg/g, which was 2.3-fold greater than that of Ti3C2Tx. After Hg2+ adsorption, SH-Ti3C2Tx was regenerated for repeated used by rinsing with HCl-thiourea. Next, SH-Ti3C2Tx was loaded onto a melamine sponge to construct SH-Ti3C2Tx adsorption columns suitable for continuous flow Hg2+ removal with extremely low flow resistance. Hg2+ removal rates exceeded 95 % when treating both high and low-concentration solutions (20 mg/L Hg2+ and 10 μg/L Hg2+). This study demonstrates the excellent adsorption-regeneration performance of SH-Ti3C2Tx, which has broad application prospects for the in-situ treatment of water contaminated with Hg2+.

Nanomedicine Targeting Cuproplasia in Cancer: Labile Copper Sequestration Using Polydopamine Particles Blocks Tumor Growth In Vivo through Altering Metabolism and Redox Homeostasis

Copper plays critical roles as a metal active site cofactor and metalloallosteric signal for enzymes involved in cell proliferation and metabolism, making it an attractive target for cancer therapy. In this study, we investigated the efficacy of polydopamine nanoparticles (PDA NPs), classically applied for metal removal from water, as a therapeutic strategy for depleting intracellular labile copper pools in triple-negative breast cancer models through the metal-chelating groups present on the PDA surface. By using the activity-based sensing probe FCP-1, we could track the PDA-induced labile copper depletion while leaving total copper levels unchanged and link it to the selective MDA-MB-231 cell death. Further mechanistic investigations revealed that PDA NPs increased reactive oxygen species (ROS) levels, potentially through the inactivation of superoxide dismutase 1 (SOD1), a copper-dependent antioxidant enzyme. Additionally, PDA NPs were found to interact with the mitochondrial membrane, resulting in an increase in the mitochondrial membrane potential, which may contribute to enhanced ROS production. We employed an in vivo tumor model to validate the therapeutic efficacy of PDA NPs. Remarkably, in the absence of any additional treatment, the presence of PDA NPs alone led to a significant reduction in tumor volume by a factor of 1.66 after 22 days of tumor growth. Our findings highlight the potential of PDA NPs as a promising therapeutic approach for selectively targeting cancer by modulating copper levels and inducing oxidative stress, leading to tumor growth inhibition as shown in these triple-negative breast cancer models.

A post-synthetic modification strategy for enhancing Pt adsorption efficiency in MOF/polymer composites

Growing polymers inside porous metal-organic frameworks (MOFs) can allow incoming guests to access the backbone of otherwise non-porous polymers, boosting the number and/or strength of available adsorption sites inside the porous support. In the present work, we have devised a novel post-synthetic modification (PSM) strategy that allows one to graft metal-chelating functionality onto a polymer backbone while inside MOF pores, enhancing the material's ability to recover Pt(iv) from complex liquids. For this, polydopamine (PDA) was first grown inside of a MOF, known as Fe-BTC (or MIL-100 Fe). Next, a small thiol-containing molecule, 2,3-dimercapto-1-propanol (DIP), was grafted to the PDA via a Michael addition. After the modification of the PDA, the Pt adsorption capacity and selectivity were greatly enhanced, particularly in the low concentration regime, due to the high affinity of the thiols towards Pt. Moreover, the modified composite was found to be highly selective for precious metals (Pt, Pd, and Au) over common base metals found in electronic waste (i.e., Pb, Cu, Ni, and Zn). X-ray photoelectron spectroscopy (XPS) and in situ X-ray absorption spectroscopy (XAS) provided insight into the Pt adsorption/reduction process. Last, the PSM was extended to various thiols to demonstrate the versatility of the chemistry. It is hoped that this work will open pathways for the future design of novel adsorbents that are fine-tuned for the rapid, selective retrieval of high-value and/or critical metals from complex liquids.

Recent Advances in Metal-Organic Framework (MOF)-Based Composites for Organic Effluent Remediation

Environmental pollution caused by organic effluents emitted by industry has become a worldwide issue and poses a serious threat to the public and the ecosystem. Metal-organic frameworks (MOFs), comprising metal-containing clusters and organic bridging ligands, are porous and crystalline materials, possessing fascinating shape and size-dependent properties such as high surface area, abundant active sites, well-defined crystal morphologies, and huge potential for surface functionalization. To date, numerous well designated MOFs have emerged as critical functional materials to solve the growing challenges associated with water environmental issues. Here we present the recent progress of MOF-based materials and their applications in the treatment of organic effluents. Firstly, several traditional and emerging synthesis strategies for MOF composites are introduced. Then, the structural and functional regulations of MOF composites are presented and analyzed. Finally, typical applications of MOF-based materials in treating organic effluents, including chemical, pharmaceutical, textile, and agricultural wastewaters are summarized. Overall, this review is anticipated to tailor design and regulation of MOF-based functional materials for boosting the performance of organic effluent remediation.

Heavy metal sequestration from wastewater by metal-organic frameworks: a state-of-the-art review of recent progress

Metal-organic frameworks (MOFs) have emerged as highly promising adsorbents for removing heavy metals from wastewater due to their tunable structures, high surface areas, and exceptional adsorption capacities. This review meticulously examines and summarizes recent advancements in producing and utilizing MOF-based adsorbents for sequestering heavy metal ions from water. It begins by outlining and contrasting commonly employed methods for synthesizing MOFs, such as solvothermal, microwave, electrochemical, ultrasonic, and mechanochemical. Rather than delving into the specifics of adsorption process parameters, the focus shifts to analyzing the adsorption capabilities and underlying mechanisms against critical metal(loid) ions like chromium, arsenic, lead, cadmium, and mercury under various environmental conditions. Additionally, this article discusses strategies to optimize MOF performance, scale-up production, and address environmental implications. The comprehensive review aims to enhance the understanding of MOF-based adsorption for heavy metal remediation and stimulate further research in this critical field. In brief, this review article presents a comprehensive overview of the contemporary information on MOFs as an effective adsorbent and the challenges being faced by these adsorbents for heavy metal mitigation (including stability, cost, environmental issues, and optimization), targeting to develop a vital reference for future MOF research.

Comprehensive assessment of carbon-, biomaterial- and inorganic-based adsorbents for the removal of the most hazardous heavy metal ions from wastewater

Owing to the high cost of recycling waste, underdeveloped countries discharge industrial, agricultural, and anthropogenic effluents without pretreatment. As a result, pollutant-loaded waste enters water bodies. Among the diverse toxic contaminants, heavy metal ions are the most detrimental because of their chronic toxicity, non-degradability, prevalence, and bioaccumulation. The growing shortage of water resources demands the removal of heavy metal ions from wastewater. Three SDGs of the sustainability agenda of the United Nations appeal for clean water to protect life beneath water and on land depending on the water sources. Therefore, efficient environmentally friendly approaches for wastewater treatment are urgently required. In this regard, several methods have been developed for the removal of heavy metal ions from wastewater, including adsorption as the most widely used method owing to its eco-friendly, cost-effective, and sustainable nature. The present review discusses the progress in the preparation and application of various adsorbents based on carbon, micro-organisms, agricultural waste and inorganic materials for the extraction of toxic metal ions such as Pb2+, Cr6+, As3+, As5+, Hg2+ and Cd2+. Herein, we provide information on the role of the homogeneity and heterogeneity of adsorbents, kinetics of the adsorption of an adsorbate on the surface of an adsorbent, insights into adsorption reaction pathways, the mechanism of the sorption process, and the uptake of solutes from solution. The present review will be useful for researchers working on environmental protection and clean environment.

Cotinuous precision separation of gold using a metal-organic framework/polymer composite

Critical metals of environmental and economic relevance can be found within complex mixtures, such as mine tailings, electronic waste and wastewater, at trace amounts. Specifically, gold is a critical metal that carries desired redox active properties in various applications, including modern electronics, medicine and chemical catalysis. Here we report the structuring of sub-micron Fe-BTC/PpPDA crystallites into larger 250μm or 500μm granules for continuous packed bed experiments for the precision separation of gold. The Structured Fe-BTC/PpPDA is highly crystalline and porous with a BET surface area of 750 m2g-1. Further, the hybrid nanocomposite material maintains its selectivity for gold ions over common inorganic interferents. The structuring approach reported prevents excessive pressure drop and ensures stability over time and operation in a packed bed column. Further, we demonstrate that the Structured Fe-BTC/PpPDA can concentrate at least 42 wt% of gold under a dynamic continuous flow operation. These findings highlight the potential of Structured Fe-BTC/PpPDA for practical applications in industry, particularly in the selective capture of gold from complex mixtures.

Nanoarchitectonics Design Strategy of Metal-Organic Framework and Bio-Metal-Organic Framework Composites for Advanced Wastewater Treatment through Adsorption

Freshwater depletion is an alarm for finding an eco-friendly solution to treat wastewater for drinking and domestic applications. Though several methods like chlorination, filtration, and coagulation-sedimentation are conventionally employed for water treatment, these methods need to be improved as they are not environmentally friendly, rely on chemicals, and are ineffective for all kinds of pollutants. These problems can be addressed by employing an alternative solution that is effective for efficient water treatment and favors commercial aspects. Metal organic frameworks (MOFs), an emerging porous material, possess high stability, pore size tunability, greater surface area, and active sites. These MOFs can be tailored; thus, they can be customized according to the target pollutant. Hence, MOFs can be employed as adsorbents that effectively target different pollutants. Bio-MOFs are a kind of MOFs that are incorporated with biomolecules, which also possess properties of MOFs and are used as a nontoxic adsorbent. In this review, we elaborate on the interaction between MOFs and target pollutants, the role of linkers in the adsorption of contaminants, tailoring strategy that can be employed on MOFs and Bio-MOFs to target specific pollutants, and we also highlight the effect of environmental matrices on adsorption of pollutants by MOFs.

Advances in metal-organic frameworks for water remediation applications

Rapid industrialization and agricultural development have resulted in the accumulation of a variety of harmful contaminants in water resources. Thus, various approaches such as adsorption, photocatalytic degradation and methods for sensing water contaminants have been developed to solve the problem of water pollution. Metal-organic frameworks (MOFs) are a class of coordination networks comprising organic-inorganic hybrid porous materials having organic ligands attached to inorganic metal ions/clusters via coordination bonds. MOFs represent an emerging class of materials for application in water remediation owing to their versatile structural and chemical characteristics, such as well-ordered porous structures, large specific surface area, structural diversity, and tunable sites. The present review is focused on recent advances in various MOFs for application in water remediation via the adsorption and photocatalytic degradation of water contaminants. The sensing of water pollutants using MOFs via different approaches, such as luminescence, electrochemical, colorimetric, and surface-enhanced Raman spectroscopic techniques, is also discussed. The high porosity and chemical tunability of MOFs are the main driving forces for their widespread applications, which have huge potential for their commercial use.

Endogenous metal-ion dynamic nuclear polarization for NMR signal enhancement in metal organic frameworks

Rational design of metal-organic framework (MOF)-based materials for catalysis, gas capture and storage, requires deep understanding of the host-guest interactions between the MOF and the adsorbed molecules. Solid-State NMR spectroscopy is an established tool for obtaining such structural information, however its low sensitivity limits its application. This limitation can be overcome with dynamic nuclear polarization (DNP) which is based on polarization transfer from unpaired electrons to the nuclei of interest and, as a result, enhancement of the NMR signal. Typically, DNP is achieved by impregnating or wetting the MOF material with a solution of nitroxide biradicals, which prevents or interferes with the study of host-guest interactions. Here we demonstrate how Gd(iii) ions doped into the MOF structure, LaBTB (BTB = 4,4',4''-benzene-1,3,5-triyl-trisbenzoate), can be employed as an efficient polarization agent, yielding up to 30-fold 13C signal enhancement for the MOF linkers, while leaving the pores empty for potential guests. Furthermore, we demonstrate that ethylene glycol, loaded into the MOF as a guest, can also be polarized using our approach. We identify specific challenges in DNP studies of MOFs, associated with residual oxygen trapped within the MOF pores and the dynamics of the framework and its guests, even at cryogenic temperatures. To address these, we describe optimal conditions for carrying out and maximizing the enhancement achieved in DNP-NMR experiments. The approach presented here can be expanded to other porous materials which are currently the state-of-the-art in energy and sustainability research.

PVDF Nanofiber Modified with ZnO Nanowires/Polydopamine for the Treatment of Sewage Containing Heavy Metals, Organic Dyes, and Bacteria

In various countries worldwide, the issue of wastewater contamination poses a significant threat due to its intricate composition of heavy metals, organic dyes, and microorganisms, thereby complicating the purification process. Consequently, researchers have expressed considerable interest in materials capable of eliminating organic, heavy metal, and microbial pollutants. This study focuses on the fabrication of a water purification membrane (PDA/ZnO-NWs/PVDF) with a hierarchical structure and the ability to remove multiple pollutants. The membrane was created by modifying poly(vinylidene fluoride) (PVDF) nanofiber with zinc oxide nanowires (ZnO-NWs) and reinforcing it with polydopamine (PDA). The experimental results demonstrate that the PDA/ZnO-NWs/PVDF membrane exhibits a range of functionalities, including long-lasting superhydrophilicity, Cu(II) adsorption, photocatalytic degradation, and antibacterial ability. The manipulation of the DA synthesis procedure allows for the adjustment of the wettability, adsorption, and photocatalytic and antibacterial activities of the PDA/ZnO-NWs/PVDF composite. According to the Langmuir isotherm, the maximum Cu(II) adsorption capacity of the PDA/ZnO-NWs/PVDF membrane is determined to be 65.75 mg/g, which is significantly higher (27.26 mg/g) than that of the ZnO-NWs/PVDF membrane (38.49 mg/g). The PDA/ZnO-NWs/PVDF composite exhibited a notable degradation capacity toward rhodamine B under natural sunlight, reaching a maximum of 5.97 mg/g. Additionally, the degradation rate achieved during daylight hours was as high as 90.42%. Furthermore, the antibacterial efficacy of the PDA/ZnO-NWs/PVDF composite against both Gram-positive and Gram-negative bacteria approached 100%. This work presents a promising approach for the treatment of wastewater containing various coexisting contaminants.

Nanoarchitectonics of Bimetallic MOF@Lab-Grade Flexible Filter Papers: An Approach Towards Real-Time Water Decontamination and Circular Economy

This study presents a novel approach to decontaminate ferrocyanide-contaminated wastewater. The work effectively demonstrates the use of bimetallic Mo/Zr-UiO-66 as a super-adsorbent for rapid sequestration of Prussian blue, a frequently found iron complex in cyanide-contaminated soils/groundwater. The exceptional performance of Mo/Zr-UiO-66 is attributed to the insertion of secondary metallic sites, which deliver synergistic effects, benefiting the inherent qualities of the framework. Moreover, to extend the industrial applications of metal-organic frameworks (MOFs) in real-world scenarios, an approach is delivered to structure the nanocrystalline powders into MOF-based macrostructures. The work demonstrates an interfacial process to develop continuous MOF nanostructures on ordinary laboratory-grade filter papers. The novelty of the work lies in the development of robust free-standing filtration materials to purify PB dye-contaminated water. Additionally, the work embraces a circular economy concept to address problems related to resource scarcity, excessive waste production, and maintenance of economic benefits. Consequently, the PB dye-loaded adsorbent waste is re-employed for the adsorption of heavy metals (Pb2+ and Cd2+ ). Simultaneously, the study aims to address the problems related to the real-time handling of powdered adsorbents, and the generation of ecologically harmful secondary waste, thereby, progressing toward a more sustainable system.

Rapid, Selective Extraction of Silver from Complex Water Matrices with a Metal-Organic Framework/Oligomer Composite Constructed via Supercritical CO2

Every year vast quantities of silver are lost in various waste streams; this, combined with its limited, diminishing supply and rising demand, makes silver recovery of increasing importance. Thus, herein, we report a controllable, green process to produce a host of highly porous metal-organic framework (MOF)/oligomer composites using supercritical carbon dioxide (ScCO2 ) as a medium. One resulting composite, referred to as MIL-127/Poly-o-phenylenediamine (PoPD), has an excellent Ag+ adsorption capacity, removal efficiency (>99 %) and provides rapid Ag+ extraction in as little as 5 min from complex liquid matrices. Notably, the composite can also reduce sliver concentrations below the levels (<0.1 ppm) established by the United States Environmental Protection Agency. Using theoretical simulations, we find that there are spatially ordered polymeric units inside the MOF that promote the complexation of Ag+ over other common competing ions. Moreover, the oligomer is able to reduce silver to its metallic state, also providing antibacterial properties.

Metal-Organic Frameworks Meet Polymers: From Synthesis Strategies to Healthcare Applications

Metal-organic frameworks (MOFs) have been at the forefront of nanotechnological research for the past decade owing to their high porosity, high surface area, diverse configurations, and controllable chemical structures. They are a rapidly developing class of nanomaterials that are predominantly applied in batteries, supercapacitors, electrocatalysis, photocatalysis, sensors, drug delivery, gas separation, adsorption, and storage. However, the limited functions and unsatisfactory performance of MOFs resulting from their low chemical and mechanical stability hamper further development. Hybridizing MOFs with polymers is an excellent solution to these problems, because polymers-which are soft, flexible, malleable, and processable-can induce unique properties in the hybrids based on those of the two disparate components while retaining their individuality. This review highlights recent advances in the preparation of MOF-polymer nanomaterials. Furthermore, several applications wherein the incorporation of polymers enhances the MOF performance are discussed, such as anticancer therapy, bacterial elimination, imaging, therapeutics, protection from oxidative stress and inflammation, and environmental remediation. Finally, insights from the focus of existing research and design principles for mitigating future challenges are presented.

Removal of Ni(II), Cu(II), Pb(II), and Cd(II) from Aqueous Phases by Silver Nanoparticles and Magnetic Nanoparticles/Nanocomposites

The intake of heavy metals into the body, even at very low concentrations, may cause a decrease in central nervous system functions; deterioration of blood composition; and liver, kidney, and lung damage. Therefore, heavy metal ions must be removed from water. In this study, silver, magnetic iron/copper, and iron oxide nanoparticles were synthesized using Lathyrus brachypterus extract and then Fe/Cu-AT, Fe3O4-AT, Fe/Cu-CS, and Fe3O4-CS magnetic nanocomposite beads were synthesized using alginate and chitosan. The removal of Cd(II), Pb(II), Ni(II), and Cu(II) ions from aqueous phases using synthesized nanoadsorbents was investigated by single and competitive (double and quaternary) adsorption techniques. The kinetic usability of the magnetic iron oxide chitosan (Fe3O4-CS) nanocomposite beads with the highest removal efficiency was evaluated. Based on experimental results, the order of removal was found to be 98.39, 75.52, 51.54, and 45.34%, and it was listed as Pb(II) > Cu(II) > Cd(II) > Ni(II), respectively. The Dubinin-Radushkevich, Freundlich, Langmuir, and Temkin isotherm models were used, and experimental results revealed that the experimental data fit the Langmuir model better. The maximum adsorption capacities (qm) obtained from the Langmuir isotherm model of Fe3O4-CS were found to be 8.71, 23.75, 18.57, and 12.38 mg/g for Ni(II), Pb(II), Cu(II), and Cd(II) ions, respectively. When the kinetic data were applied to the Lagergren, Ho-McKay, and Elovich models, it was observed that the adsorption kinetics mostly conformed to the Ho-McKay second-order rate equation. The binary and quaternary competitive adsorption data showed that Fe3O4-CS were selective toward Cu(II) and Pb(II). The reusability of the Fe3O4-CS nanoadsorbent was performed as three cycles with the same concentration. The adsorption capacities were found to be 95.81, 70.65, 50.50, and 42.75%, in turn for Pb(II), Cu(II), Cd(II), and Ni(II) ions after three cycles, which revealed that the Fe3O4-CS nanoadsorbent can be used after three cycles without losing its efficiency.

Characterization of an Iron-Copper Bimetallic Metal-Organic Framework for Adsorption of Methyl Orange in Aqueous Solution

Iron-based organic frame material MIL-53 (Fe) was synthesized by the hydrothermal method with Cu2+ incorporated to obtain bimetallic composite MIL-53 (Fe, Cu). The structure and morphology of the material were characterized by SEM, XRD, BET, FTIR, XPS, and zeta potential. The adsorption performance of MIL-53 (Fe, Cu) on methyl orange was tested under a variety of conditions, including the effects of pH and material dosage, by the static adsorption test. The results show that under the condition of pH = 7, a temperature of 30°C, and an adsorbent dosage of 20 mg, the removal rate of MIL-53 (Fe, Cu) for methyl orange can reach more than 96% within 4 h, and the maximum adsorption capacity after fitting by the thermodynamic model can reach 294.43 mg/g, showing the excellent adsorption performance of MIL-53 (Fe, Cu) on methyl orange. In addition, by exploring the adsorption mechanism of MIL-53 (Fe, Cu) on methyl orange, it is found that the adsorption of MIL-53 (Fe, Cu) on methyl orange depends on chemical adsorption, as evidenced by combining Fe3+ and Cu2+ in the material with methyl orange molecules to form complexes to achieve adsorption. While the specific surface area of the material had no obvious effect on adsorption, the effects of pH, temperature, and concentration were explored. At a pH of 6.5, greater adsorption occurred at higher temperatures, as determined by thermodynamic model fitting, as well as with higher initial methyl orange molecule concentration.

Silk nanofibrils-MOF composite membranes for pollutant removal from water

Membrane separation technology is considered an effective strategy to remove pollutants in sewage. However, it remains a significant challenge to fabricate inexpensive membranes with high purification efficiency. Therefore, the present study proposes the integration of silk nanofibrils (SNFs) and polydopamine⊂metal-organic framework (PDA⊂MOF) nanoparticles to prepare self-supporting membranes, which can effectively intercept nanoparticle pollutants through the size exclusion effect and can strongly adsorb organic dyes and metal ions by SNF. In addition, PDA⊂MOF enables these membranes to adsorb small molecules and heavy metal ions during the filtration process, thereby effectively removing various pollutants from sewage. The integration of size-exclusion and adsorption capabilities enables the SNF/PDA⊂MOF membrane to remove nanoparticles, small-molecule dyes, heavy metal ions, and radioactive elements. This work provides a rational approach for the design and development of the next generation of water treatment membranes and is expected to be used in environmental, food-related, and biomedical fields.

Is sorption technology fit for the removal of persistent and mobile organic contaminants from water?

Persistent, Mobile, and Toxic (PMT) and very persistent and very mobile (vPvM) substances are a growing threat to water security and safety. Many of these substances are distinctively different from other more traditional contaminants in terms of their charge, polarity, and aromaticity. This results in distinctively different sorption affinities towards traditional sorbents such as activated carbon. Additionally, an increasing awareness on the environmental impact and carbon footprint of sorption technologies puts some of the more energy-intensive practices in water treatment into question. Commonly used approaches may thus need to be readjusted to become fit for purpose to remove some of the more challenging PMT and vPvM substances, including for example short chained per- and polyfluoroalkyl substances (PFAS). We here critically review the interactions that drive sorption of organic compounds to activated carbon and related sorbent materials and identify opportunities and limitations of tailoring activated carbon for PMT and vPvM removal. Other less traditional sorbent materials, including ion exchange resins, modified cyclodextrins, zeolites and metal-organic frameworks are then discussed for potential alternative or complementary use in water treatment scenarios. Sorbent regeneration approaches are evaluated in terms of their potential, considering reusability, potential for on-site regeneration, and potential for local production. In this context, we also discuss the benefits of coupling sorption to destructive technologies or to other separation technologies. Finally, we sketch out possible future trends in the evolution of sorption technologies for PMT and vPvM removal from water.

A customized MOF-polymer composite for rapid gold extraction from water matrices

With the fast-growing accumulation of electronic waste and rising demand for rare metals, it is compelling to develop technologies that can promotionally recover targeted metals, like gold, from waste, a process referred to as urban mining. Thus, there is increasing interest in the design of materials to achieve rapid, selective gold capture while maintaining high adsorption capacity, especially in complex aqueous-based matrices. Here, a highly porous metal-organic framework (MOF)-polymer composite, BUT-33-poly(para-phenylenediamine) (PpPD), is assessed for gold extraction from several matrices including river water, seawater, and leaching solutions from CPUs. BUT-33-PpPD exhibits a record-breaking extraction rate, with high Au³⁺ removal efficiency (>99%) within seconds (less than 45 s), a competitive capacity (1600 mg/g), high selectivity, long-term stability, and recycling ability. Furthermore, the high porosity and redox adsorption mechanism were shown to be underlying reasons for the material's excellent performance. Given the accumulation of recovered metallic gold nanoparticles inside, the material was also efficiently applied as a catalyst.

Atomic layer encapsulation of ferrocene into zeolitic imidazolate framework-67 for efficient arsenic removal from aqueous solutions

Arsenic (As(V))-contaminated water is a major global threat to human health and the ecosystem because of its enormous toxicity, carcinogenicity, and high distribution in water streams. Thus, As(V) removal in the environmental samples has received considerable attention. Till now, numerous metal-organic framework materials have been used for the As(V) removal from the aqueous medium, but low As(V) removal and instability of the adsorbents have severely cut off their practical applications. In this study, a ferrocene-encapsulated zeolitic imidazolate framework-67 (Fc-ZIF-67) material was synthesized for As(V) removal from an aqueous solution at neutral pH using a simple solution mixing process. The ferrocene encapsulation provides water-stable and structural defects to ZIF-67. Furthermore, the ferrocene molecule and imidazole linker can enhance As(V) adsorption via both chemisorption and physisorption. The novel Fc-ZIF-67 adsorbent exhibited superior As(V) adsorption performance with an adsorption capacity of 63.29 mg/g at neutral pH. The Langmuir and Freundlich isotherm models were also used to analyze adsorption behavior.

Guanidine-Functionalized Fluorescent sp2 Carbon-Conjugated Covalent Organic Framework for Sensing and Capture of Pd(II) and Cr(VI) Ions

Palladium is a key element in fuel cells, electronic industries, and organic catalysis. At the same time, chromium is essential in leather, electroplating, and metallurgical industries. However, their unpremeditated leakage into aquatic systems has caused human health and environmental apprehensions. Herein, we reported the development of an sp² carbon-conjugated fluorescent covalent organic framework with a guanidine moiety (sp² c-gCOF) that showed excellent thermal and chemical stability. The sp² c-gCOF showed effective sensing, capture, and recovery/removal of Pd(II) and Cr(VI) ions, which could be due to the highly accessible pore walls decorated with guanidine moieties. The fluorescent sp² c-gCOF showed higher selectivity for Pd(II) and Cr(VI) ions, with an ultra-low detection limit of 2.7 and 3.2 nM, respectively. The analysis of the adsorption properties with a pseudo-second-order kinetic model showed that sp² c-gCOF could successfully and selectively remove both Pd(II) and Cr(VI) ions from aqueous solutions. The polymer also showed excellent capture efficacy even after seven consecutive adsorption-desorption cycles. Hence, this study reveals the potential of fluorescent sp² c-gCOF for detecting, removing, and recovering valuable metals and hazardous ions from wastewater, which would be useful for economic benefit, environmental safety, human health, and sustainability. The post-synthetic modification of sp² c-COF with suitable functionalities could also be useful for sensing and extracting other water pollutants and valuable materials from an aqueous system.

Thiol-decorated defective metal-organic framework for effective removal of mercury(II) ion

Removal of mercury (Hg) ion from water is important while still faces challenges in capacity and adsorption speed. Herein, using thiol-containing mercaptoacetic acid (MA) as the template, we constructed a novel metal-organic framework (MOF) adsorbent, Zr-MSA-MA (MSA, mercaptosuccinic acid). Unlike other monodentate acids such as acetic acid and formic acid, MA benefits to maintain high-content binding sites, in the meantime of defect formation. On the basis, Zr-MSA-MA exhibits a high adsorption capacity of 714.8 mg g^-1 for Hg²⁺ and fast adsorption kinetics, superior to other MOF-based adsorbents. Co-existing metal ions and pH have only slight interference for the adsorption behavior. Besides, the adsorption is proved to an endothermic reaction and the adsorbent can be regenerated based on a simple elution. Further analysis indicates the strong chemical bonding of Hg²⁺ and -SH is the main adsorption mechanism. Thus, our work demonstrates the Zr-MSA-MA can serve as a potential adsorbent for Hg²⁺, and provides a novel strategy to construct defective adsorbent via using active group-containing template.

Improved Lead Sensing Using a Solid-Contact Ion-Selective Electrode with Polymeric Membrane Modified with Carbon Nanofibers and Ionic Liquid Nanocomposite

A new solid-contact ion-selective electrode (ISE) sensitive to lead (II) ions, obtained by modifying a polymer membrane with a nanocomposite of carbon nanofibers and an ionic liquid 1-hexyl-3-methylimidazolium hexafluorophosphate, is presented. Electrodes with a different amount of nanocomposite in the membrane (0-9% w/w), in which a platinum wire or a glassy carbon electrode was used as an internal electrode, were tested. Potentiometric and electrochemical impedance spectroscopy measurements were carried out to determine the effect of the ion-sensitive membrane modification on the analytical and electrical parameters of the ion-selective electrode. It was found that the addition of the nanocomposite causes beneficial changes in the properties of the membrane, i.e., a decrease in resistance and an increase in capacitance and hydrophobicity. As a result, the electrodes with the modified membrane were characterized by a lower limit of detection, a wider measuring range and better selectivity compared to the unmodified electrode. Moreover, a significant improvement in the stability and reversibility of the electrode potential was observed, and additionally, they were resistant to changes in the redox potential of the sample. The best parameters were shown by the electrode obtained with the use of a platinum wire as the inner electrode with a membrane containing 6% of the nanocomposite. The electrode exhibited a Nernstian response to lead ions over a wide concentration range, 1.0 × 10^-8-1.0 × 10^-2 mol L^-1, with a slope of 31.5 mV/decade and detection limit of 6.0 × 10^-9 mol L^-1. In addition, the proposed sensor showed very good long term stability and worked properly 4 months after its preparation without essential changes in the E⁰ or slope values. It was used to analyze a real sample and correct results of lead content determination were obtained.

(Multivariate)-Metal-Organic Framework for Highly Efficient Antibiotic Capture from Aquatic Environmental Matrices

Contamination of aquatic environments by pharmaceuticals used by modern societies has become a serious threat to human beings. Among them, antibiotics are of particular concern due to the risk of creating drug-resistant bacteria and, thus, developing efficient protocols for the capture of this particular type of drug is mandatory. Herein, we report a family of three isoreticular MOFs, derived from natural amino acids, that exhibit high efficiency in the removal of a mixture of four distinct families of antibiotics, such as fluoroquinolones, penicillins, lincomycins, and cephalosporins, as solid-phase extraction (SPE) sorbents. In particular, a multivariate (MTV)-MOF, prepared using equal percentages of amino acids l-serine and l-methionine, also exhibits outstanding recyclability, surpassing the benchmark material activated carbon. The good removal performance of the MTV-MOF was rationalized by means of single-crystal X-ray diffraction. These results highlight the situation of MOFs as a real and promising alternative for the capture of antibiotics from environmental matrices, especially wastewater streams.

Stabilization mechanism of Pb with an amino- and mercapto-polymer to assist phytoremediation

An important concern during phytoremediation of heavy metal contamination in soils is the risk of leaching of heavy metals before they can be taken up by plants. The most effective method is to use heavy metal stabilizers. However, the stabilization without selectivity will greatly inhibit the phytoremediation effect of all heavy metals. A novel polymer with amino and mercapto groups named as AMP has been prepared as a new exclusive soil stabilizer for Pb. The adsorption of AMP toward Pb belonged to a monolayer adsorption and chemical process. The adsorption capacity of Pb increased with the increase of pH and initial Pb concentration, and obeyed the Langmuir model and pseudo-second-order model, respectively. An amazing maximum adsorption capacity of 588 mg Pb g^-1 was reached for AMP when initial concentration was 300 mg Pb L^-1, while K₂ of 0.594 g mg^-1 min^-1 was obtained when the initial Pb concentration was 2.0 mg L^-1. The distribution coefficient of AMP to Pb in the mixture of five heavy metals was as high as 3110 mL g^-1, which was at least 7-fold greater than those of other heavy metals, exhibiting high selective to Pb. AMP showed a fast, large adsorption capacity and good selectivity due to the abundance of sulfhydryl and amino functional groups in the polymer and their interaction with metal ions. The effects of AMP in soil remediation were further tested by a soil column leaching experiment and a pot experiment, and the good stabilization effect of AMP on Pb and the less effect on bioavailability of other heavy metals at recommended doses were verified. This study was expected to solve the problem of leaching risk of the target metal such as Pb in sludge during land use. It provided a new idea of exclusive stabilization to assist phytoremediation of non-target heavy metals by reducing the leaching risk of some special target metal.

FeOOH nanosheet assisted metal ion coordination with porphyrins for rapid detection and removal of cadmium ions in water

Excessive cadmium ions in water bodies pose a severe challenge to ecology and human health, and the development of cadmium metal ion sensors is imperative. Here, we showed a dual-signal sensor based on colorimetry and fluorescence that was self-assembled from FeOOH nanosheets and TMPyP4. This nanocomposite enabled quick, selective cadmium ion detection. The Soret band at 442 nm in the UV absorption spectrum represented the coordination of cadmium ions with FeOOH@TMPyP4, and the absorbance increased linearly with increasing cadmium ion concentration (R² = 0.989 and linear range: 0.5-10 μM). In the presence of FeOOH nanosheets, the coordination of cadmium ions with FeOOH@TMPyP4 took only 70 min, and the detection limit of cadmium ions was as low as 0.24 μM. In addition, Cd²⁺ could be effectively removed from the nanocomposite due to its easy separation from water. This research developed a simple and efficient approach for detecting and removing heavy metal ions from water bodies.

From Classical to Advanced Use of Polymers in Food and Beverage Applications

Polymers are extensively used in food and beverage packaging to shield against contaminants and external damage due to their barrier properties, protecting the goods inside and reducing waste. However, current trends in polymers for food, water, and beverage applications are moving forward into the design and preparation of advanced polymers, which can act as active packaging, bearing active ingredients in their formulation, or controlling the head-space composition to extend the shelf-life of the goods inside. In addition, polymers can serve as sensory polymers to detect and indicate the presence of target species, including contaminants of food quality indicators, or even to remove or separate target species for later quantification. Polymers are nowadays essential materials for both food safety and the extension of food shelf-life, which are key goals of the food industry, and the irruption of smart materials is opening new opportunities for going even further in these goals. This review describes the state of the art following the last 10 years of research within the field of food and beverage polymer's applications, covering present applications, perspectives, and concerns related to waste generation and the circular economy.

Fabrication of efficient protein imprinted materials based on pearl necklace-like MOFs bacterial cellulose composites

The acquisition of efficient protein isolation substances is vital for proteomic research, whereas it's still challenging nowadays. Herein, an elaborately designed protein imprinted material based on a bacterial cellulose@ZIF-67 composite carrier (BC@ZIF-67) is proposed for the first time. In particular, due to the ultrafine fiber diameter and abundant hydroxyl functional groups of the bacterial cellulose, BC@ZIF-67 presented a compact arrangement structure similar to a pearl necklace, which greatly promoted template immobilization and mass transfer resistance in protein imprinting technology. Therefore, the protein-imprinted material (BC@ZIF-67@MIPs) fabricated by surface imprinting technology and template immobilization strategy could exhibit ultrahigh adsorption capacity (1017.0 mg g^-1), excellent recognition (IF = 5.98) and rapid adsorption equilibrium time (50 min). In addition, based on the experiment outcomes, our team employed BC@ZIF-67@MIPs to enrich template protein in blended protein solutions and biosamples, identifying them as underlying candidates for isolating and purifying proteins.

The synthesis of nanocellulose-based nanocomposites for the effective removal of hexavalent chromium ions from aqueous solution

The present study reports the synthesis of a polydopamine (PDA)/nanocellulose (NC) nanocomposite for the effective removal of chromium ions from water. PDA was used to modify NC surface producing a nanocomposite namely PDA/NC, by in situ polymerization of dopamine on the surface of NC. Thereafter, the as-synthesized nanocomposite was characterized using familiar techniques such as Fourier transform infrared, X-ray diffraction, X-ray photoelectron spectroscopy, ultraviolet-visible spectroscopy, and transmission electron microscopy. All results indicated the successful combination of PDA and NC in one nanocomposite. The PDA/NC nanocomposite was evaluated for the removal of hexavalent Cr(vi) ions from an aqueous solution. The adsorption conditions, such as pH, contact time, and initial Cr(vi) concentration, were optimized. Adsorption kinetic studies revealed that Cr(vi) removal on the surface of PDA/NC nanocomposite followed the pseudo-second-order kinetic model. Furthermore, isotherm studies revealed that Cr(vi) removal followed the Langmuir isotherm model with a maximum adsorption capacity (q m) of 210 mg/g. The adsorption mechanism study indicated that the Cr(vi) removal was reached via complexation, adsorption, and chemical reduction. The reusability of a PDA/NC nanocomposite for the removal of Cr(vi) ions was studied up to five cycles with acceptable results. The high adsorption capacity and multiple removal mechanisms validated the effective applicability of PDA/NC nanocomposite as a useful adsorbent for the removal of Cr(vi) ions from aqueous solution.

Solid-state synthesis of a MOF/polymer composite for hydrodeoxygenation of vanillin

A new solid-state method was used to introduce a furan-thiourea polymer into the pores of a MOF, Cr-BDC. Next, the activity of the new MOF-polymer composite containing Pd was assessed in the catalytic hydrodeoxygenation of vanillin, a biomass derived chemical.

Removal of lead ions from aqueous solution using new magnetic metal-organic framework

In this research, new magnetic nanocomposites that consist of NH₂-MIL53 (Al) and Fe₃O₄ nanoparticles functionalized with cysteine were synthesized and characterized. The application of these nanocomposites was investigated to remove lead ions from the wastewater model. The concentration of metal ions was measured by the utilization of flame atomic absorption spectroscopy (FAAS). Also, XRD, SEM, EDX, and FTIR instruments were used to identification and characterization of the synthesized nanocomposites. The effect of operating parameters such as; pH, contact time and adsorbent dosage were investigated on lead removal. The synthesized nanocomposite showed great potential for lead removal. The maximum adsorption capacity of the nanocomposite was about 361.53 mg/g. Adsorption kinetic parameters well fitted with the pseudo-second order kinetic model. The reusability test of the synthesized magnetic absorbent showed good adsorption efficiency for at least three consecutive cycles.

Contamination level, source identification and health risk assessment of potentially toxic elements in drinking water sources of mining and non-mining areas of Khyber Pakhtunkhwa, Pakistan

Accelerated mining activities have increased water contamination with potentially toxic elements (PTEs) and their associated human health risk in developing countries. The current study investigated the distribution of PTEs, their potential sources and health risk assessment in both ground and surface water sources in mining and non-mining areas of Khyber Pakhtunkhwa, Pakistan. Water samples (n = 150) were taken from selected sites and were analyzed for six PTEs (Ni, Cr, Zn, Cu, Pb and Mn). Among PTEs, Cr showed a high mean concentration (497) μg L^-1, followed by Zn (414) μg L^-1 in the mining area, while Zn showed the lowest mean value (4.44) μg L^-1 in non-mining areas. Elevated concentrations of Ni, Cr and a moderate level of Pb in ground and surface water of Mohmand District exceeded the permissible limits set by WHO. Multivariate statistical analyses showed that the pollution sources of PTEs were mainly from mafic-ultramafic rocks, acid mine drainage, open dumping of mine wastes and mine tailings. The hazard quotient (HQ) was the highest for children relative to that for adults, but not higher than the USEPA limits. The hazard index (HI) for ingestions of all selected PTEs was lower than the threshold value (HI_ing < 1), except for Mohmand District, which showed a value of HI >1 in mining areas through ingestion. Moreover, the carcinogenic risk (CR) values exceeded the threshold limits for Ni and Cr set by the USEPA (1.0E-04-1.0E-06). In order to protect the drinking water sources of the study areas from further contamination, management techniques and policy for mining operations need to be implemented.

Bioinspired Vascular Stents with Microfluidic Electrospun Multilayer Coatings for Preventing In-Stent Restenosis

In-stent restenosis (ISR) is seriously affecting the long-term prognosis of vascular interventional therapy and leading to enormous medical burdens. Great efforts have been devoted to developing functional vascular stents with desired features and properties for effective ISR prevention. Here, a multifunctional bionic vascular stent with designed coatings prepared using microfluidic electrospinning technology is presented. Such stents are composed of biocompatible, drug-loaded methylacrylated gelatin-polyethylene glycol diacrylate (GelMA-PEGDA) and polycaprolactone composite nanofibers on 316L stainless steel stents by an easy-to-operate step-by-step spraying method. Benefitting from the addition of polydopamine during the fabrications, the drug-loaded composite nanofibers can adhere well to both the stent and the vascular wall. Furthermore, as the inner fibrous layer of the stent contacting the lumen is equipped with heparin-vascular endothelial growth factor (Hep-VEGF), it plays an anticoagulation role and promotes the growth of endothelial cells; while the outer layer contacts the vascular wall and releases rapamycin slowly, which can restrain smooth muscle proliferation. By implanting this into the rabbit carotid artery, the multi-functional bionic demonstrates that the vascular stent can achieve good anti-thrombosis and in-stent restenosis effects, which indicates its potential values in vascular intervention and other biomedical fields.

Synthesis of Zr metal–organic frameworks (MOFs) to remove Fe3+ from water

Although a trace amount of Fe³⁺ is essential for human physiological function, excessive amounts are lethal. Here, we present a protocol for removing Fe³⁺ from water through highly crystalline and stable thiol-functionalized Zr metal-organic frameworks (Zr-MOFs). We provide details of the MOFs synthesis and post-functionalization procedures, and include key performance data of the Zr-MOFs for removing Fe³⁺, which were collected from the inductively coupled plasma-optical emission spectrometer (ICP-OES) and inductively coupled plasma mass spectrometer (ICP-MS).

For complete details on the use and execution of this protocol, please refer to Yuan et al. (2022).

•

UiO-66-Cl synthesis from ZrOCl₂·8H₂O and 2,5-dichloroterephthalic acid

•

UiO-66-Cl post-functionalized with 1,2-ethanedithiol to obtain UiO-66-S

•

Detailed characterization of Zr-MOFs

•

UiO-66-S removes Fe³⁺ from water

Publisher’s note: Undertaking any experimental protocol requires adherence to local institutional guidelines for laboratory safety and ethics.

Impact of Polydopamine Nanoparticle Surface Pattern and Roughness on Interactions with Poly(ethylene glycol) in Aqueous Solution: A Multiscale Modeling and Simulation Study

A significant research effort in the past few years has been devoted to engineering synthetic mimics of naturally occurring eumelanin. One such effort has involved the assembly of oligomers of 5,6-dihydroxyindole (DHI), a synthetic precursor of polydopamine (PDA), into melanin-mimicking nanoparticles for use in a variety of applications with desired optical, photonic, thermal, and electrical properties. In many of these applications, the PDA nanoparticles are mixed with other polymers or oligomers, thus motivating this specific study to understand how the surface characteristics of the assembled PDA-nanoparticles affect their interaction with poly(ethylene glycol) (PEG) chains in aqueous solution. We use molecular dynamics (MD) simulations to study the interaction of linear 20-mer PEG chains with different PDA-nanoparticles assembled using four types of oligomers of 5,6-DHI: two isomers of 5,6-DHI 2-mers with the monomers bonding either at the 2-2' position (A-type isomer) or 7-7' position (B-type isomer), denoted as A:2-mer and B:2-mer, respectively, and a 4-mer and an 8-mer of B-type chemistry denoted as B:4-mer and B:8-mer, respectively. Using explicit-solvent atomistic MD simulations, we find that PDA-nanoparticle surfaces assembled from B:8-mer exhibit smaller density fluctuations of water molecules and, as a result, are relatively more hydrophilic than the PDA-nanoparticle surfaces assembled from A:2-mer, B:2-mer, and B:4-mer. The surface composition of PDA-nanoparticles assembled from A:2-mer contains relatively fewer hydroxyl (-OH) groups compared to PDA-nanoparticles assembled from a B:2-mer, B:4-mer, or B:8-mer, yet the sample of PEG chains show more collapsed and adsorbed conformations on A:2-mer nanoparticles' surface. To explain the atomistically observed behavior of PEG chains on the nanoparticles' surfaces, we use coarse-grained (CG) MD simulations and explain the roles of the pattern formed by the attractive sites (e.g.,-OH groups) exposed on the surface and the roughness of the surface on interactions with a genric PEG-like copolymer chain. By comparing atomistic and CG MD simulation results, we confirm that the -OH groups' pattern on the surface of the PDA-nanoparticle assembled from A:2-mer is patchier than the random or string-like patterns on the PDA-nanoparticle assembled from B:2-mer, B:4-mer, or B:8-mer, and it is this -OH groups' surface pattern that dictates the PEG chain conformations and adsorption on the PDA-nanoparticle surface. Overall, these results guide the design of chemically and physically heterogeneous nanoparticle surfaces for the desired polymer interaction and conformations.

Effective and reusable 3D CuxS nanocluster structured magnetic adsorbent for mercury extraction from wastewater

The elimination of mercury from polluted water using an effective, cost-economic, and sustainable method was investigated in this work. A modulated multilayer magnetic Hg²⁺ extractor was prepared with a self-assembly engineering that permitting robust anchoring and uniform distribution of the negatively charged 3D Cu_xS nanocluster onto a polydopamine (PDA) covered positively strengthened Fe₃O₄ surface. The developed PAD@Fe₃O₄ supported copper sulfide composite (Cu_xS/PAD@Fe₃O₄) presented an unparalleled Hg²⁺ uptake performance with adsorption capacity of 1394.61 mg/g (without saturation), and extraordinary selectivity with distribution coefficient value K_d of 17419.2 mL/g. A complexation reaction during Hg²⁺ affinity was taken place on Cu_xS/PAD@Fe₃O₄ surface, and almost no components losses occurring during the adsorption. Furthermore, the as-prepared Cu_xS/PAD@Fe₃O₄ micron-adsorbent can be easily magnetic recovery and recycled with hydrochloric acid elution. The purification of 50 L Hg²⁺ containing wastewater, initial concentration of 20 μg/L can be achieved with Cu_xS/PAD@Fe₃O₄ dosage of 0.1 g and treatment cost of 0.077 US $. The outlet Hg²⁺ concentration met drinking water standard of the United States Environmental Protection Agency. The Cu_xS/PAD@Fe₃O₄ magnetic adsorbent can be fabricated cheaply and holds promise for scale-up applications.

Efficient mercury removal from aqueous solutions using carboxylated Ti3C2Tx MXene

Water supplies contaminated with heavy metals are a worldwide concern. MXenes have properties that make them attractive for the removal of metal ions from water. This work presents a simple one-step method of Ti₃C₂T_x carboxylation that involves the use of a chelating agent with a linear structure, providing strong carboxylic acid groups with high mobility. The carboxylation decreases the zeta-potential of Ti₃C₂T_x by ~16 to ~18 mV over a pH range of 2.0-8.5 and improves Ti₃C₂T_x stability in the presence of molecular oxygen. pH in the range of 2-6 has a negligible effect on the adsorption capacity of Ti₃C₂T_x and COOH-Ti₃C₂T_x. Compared to Ti₃C₂T_x, COOH-Ti₃C₂T_x has a slightly higher and much faster mercury uptake, and the concentration of mercury ions leached out from COOH-Ti₃C₂T_x is lower. For both Ti₃C₂T_x and COOH-Ti₃C₂T_x, the leached mercury ion concentration is far below the U.S.-EPA maximum level. At an initial Hg²⁺ concentration of 50 ppm and pH of 6, COOH-Ti₃C₂T_x has the equilibrium adsorption capacity of 499.7 mg/g and removes 95% of Hg²⁺ in less than 1 min. Moreover, it has an equilibrium time of 5 min, which is significantly shorter than that of Ti₃C₂T_x (~ 60 min). Finally, its mercury-ion uptake capacity is higher than commercially available adsorbents reported in the literature. Its mercury removal is mainly via chemisorption and monolayer adsorption.