Rough Carbon-Iron Oxide Nanohybrids for Near-Infrared-II Light-Responsive Synergistic Antibacterial Therapy

Mechanism of the antimicrobial activity induced by phosphatase inhibitor sodium ortho-vanadate

The present study describes a novel antimicrobial mechanism based on Sodium Orthovanadate (SOV), an alkaline phosphatase inhibitor. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and atomic force microscopy (AFM) were employed to examine the surface morphologies of the test organism, Escherichia coli (E. coli), during various antibacterial phases. Our results indicated that SOV kills bacteria by attacking cell wall growth and development, leaving E. coli's outer membrane intact. Our antimicrobial test indicated that the MIC of SOV for both E. coli and Lactococcus lactis (L. lactis) is 40 μM. A combination of quantum mechanical calculations and vibrational spectroscopy revealed that divanadate from SOV strongly coordinates with Ca2+ and Mg2+, which are the activity centers for the phosphatase that regulates bacterial cell wall synthesis. The current study is the first to propose the antibacterial mechanism caused by SOV attacking cell wall.

Emerging trends and future challenges of advanced 2D nanomaterials for combating bacterial resistance

The number of multi-drug-resistant bacteria has increased over the last few decades, which has caused a detrimental impact on public health worldwide. In resolving antibiotic resistance development among different bacterial communities, new antimicrobial agents and nanoparticle-based strategies need to be designed foreseeing the slow discovery of new functioning antibiotics. Advanced research studies have revealed the significant disinfection potential of two-dimensional nanomaterials (2D NMs) to be severed as effective antibacterial agents due to their unique physicochemical properties. This review covers the current research progress of 2D NMs-based antibacterial strategies based on an inclusive explanation of 2D NMs' impact as antibacterial agents, including a detailed introduction to each possible well-known antibacterial mechanism. The impact of the physicochemical properties of 2D NMs on their antibacterial activities has been deliberated while explaining the toxic effects of 2D NMs and discussing their biomedical significance, dysbiosis, and cellular nanotoxicity. Adding to the challenges, we also discussed the major issues regarding the current quality and availability of nanotoxicity data. However, smart advancements are required to fabricate biocompatible 2D antibacterial NMs and exploit their potential to combat bacterial resistance clinically.

Zeolitic imidazole framework-derived rich-Zn-Co3O4/N-doped porous carbon with multiple enzyme-like activities for synergistic cancer therapy

Reactive oxygen species (ROS)-centered chemodynamic therapy (CDT) holds significant potential for tumor-specific treatment. However, insufficient endogenous H2O2 and extra glutathione within tumor microenvironment (TME) severely deteriorate the CDT's effectiveness. Herein, rich-Zn-Co3O4/N-doped porous carbon (Zn-Co3O4/NC) was fabricated by two-step pyrolysis, and applied to build high-efficiency nano-platform for synergistic cancer therapy upon combination with glucose oxidase (GOx), labeled Zn-Co3O4/NC-GOx for clarity. Specifically, the multiple enzyme-like activities of the Zn-Co3O4/NC were scrutinously investigated, including peroxidase-like activity to convert H2O2 to O2∙-, catalase-like activity to decompose H2O2 into O2, and oxidase-like activity to transform O2 to O2∙-, which achieved the CDT through the catalytic cascade reaction. Simultaneously, GOx reacted with intracellular glucose to produce gluconic acid and H2O2, realizing starvation therapy. In the acidic TME, the Zn-Co3O4/NC-GOx rapidly caused intracellular Zn2+ pool overload and disrupted cellular homeostasis for ion-intervention therapy. Additionally, the Zn-Co3O4/NC exhibited glutathione peroxidase-like activity, which consumed glutathione in tumor cells and reduced the ROS consumption for ferroptosis. The tumor treatments offer some constructive insights into the nanozyme-mediated catalytic medicine, coupled by avoiding the TME limitations.

Injectable and Near-Infrared Light-Controllable Fibrin Hydrogels with Antimicrobial and Immunomodulating Properties for Infected Wound Healing

The management of infected wounds poses a significant challenge due to the growing issue of antibiotic resistance, underscoring the urgent necessity to innovate and implement alternative therapeutic strategies. These strategies should be capable of eliminating bacterial infections in infected wounds while circumventing the induction of multi-drug resistance. In the current study, we developed an easily prepared and injectable fibrin gel (FG) loaded with nanoparticles (NPs) that exhibit antibacterial and immunomodulatory properties to facilitate the healing of infected wounds. Initially, a novel type of NP was generated through the electrostatic interaction between the photothermal agent, mPEG-modified polydopamine (MPDA), and the nitric oxide (NO) donor, S-nitrosocysteamine (SNO). This interaction resulted in the formation of NPs referred to as SNO-loaded MPDA (SMPDA). Subsequently, the SMPDA was encapsulated into the FG using a double-barreled syringe, thereby producing the SMPDA-loaded FG (SMPDA/G). Experimental results revealed that SMPDA/G could effectively eliminate bacterial infections and alter the immune microenvironment. This efficacy is attributed to the synergistic combination of NO therapy and photothermal therapy, along with the role of SMPDA in facilitating M2 macrophage polarization within the gel. Accordingly, these findings suggest that the SMPDA/G holds substantial promise for clinical application in infected wound healing.

Molybdenum Disulfide-Supported Cuprous Oxide Nanocomposite for Near-Infrared-I Light-Responsive Synergistic Antibacterial Therapy

Drug-resistant bacterial infections pose a serious threat to human health; thus, there is an increasingly growing demand for nonantibiotic strategies to overcome drug resistance in bacterial infections. Mild photothermal therapy (PTT), as an attractive antibacterial strategy, shows great potential application due to its good biocompatibility and ability to circumvent drug resistance. However, its efficiency is limited by the heat resistance of bacteria. Herein, Cu2O@MoS2, a nanocomposite, was constructed by the in situ growth of Cu2O nanoparticles (NPs) on the surface of MoS2 nanosheets, which provided a controllable photothermal therapeutic effect of MoS2 and the intrinsic catalytic properties of Cu2O NPs, achieving a synergistic effect to eradicate multidrug-resistant bacteria. Transcriptome sequencing (RNA-seq) results revealed that the antibacterial process was related to disrupting the membrane transport system, phosphorelay signal transduction system, oxidative stress response system, as well as the heat response system. Animal experiments indicated that Cu2O@MoS2 could effectively treat wounds infected with methicillin-resistant Staphylococcus aureus. In addition, satisfactory biocompatibility made Cu2O@MoS2 a promising antibacterial agent. Overall, our results highlight the Cu2O@MoS2 nanocomposite as a promising solution to combating resistant bacteria without inducing the evolution of antimicrobial resistance.

Gold nanoclusters cure implant infections by targeting biofilm

The biofilm-mediated implant infections pose a huge threat to human health. It is urgent to explore strategies to reverse this situation. Herein, we design 3-amino-1,2,4-triazole-5-thiol (ATT)-modified gold nanoclusters (AGNCs) to realize biofilm-targeting and near-infrared (NIR)-II light-responsive antibiofilm therapy. The AGNCs can interact with the bacterial extracellular DNA through the formation of hydrogen bonds between the amine groups on the ATT and the hydroxyl groups on the DNA. The AGNCs show photothermal properties even at a low power density (0.5 W/cm2) for a short-time (5 min) irradiation, making them highly effective in eradicating the biofilm with a dispersion rate up to 90 %. In vivo infected catheter implantation model demonstrates an exceptional high ability of the AGNCs to eradicate approximately 90 % of the bacteria encased within the biofilms. Moreover, the AGNCs show no detectable toxicity or systemic effects in mice. Our study suggests the great potential of the AGNCs for long-term prevention and elimination of the biofilm-mediated infections.

Silver incorporated SeTe nanoparticles with enhanced photothermal and photodynamic properties for synergistic effects on anti-bacterial activity and wound healing

Bacteria invade the host's immune system, thereby inducing serious infections. Current treatments for bacterial infections mostly rely on single modalities, which cannot completely inhibit bacteria. This study evaluates the therapeutic potential of SeTe-Ag NPs, designed with excellent photo responsiveness, with a particular focus on their dual-action antibacterial effect and wound healing properties. SeTe-Ag NPs exhibited promising synergistic antibacterial effects due to their superior photothermal and photodynamic properties. The investigation records substantial zones of inhibition of bacteria, demonstrating potent antibacterial effect. Furthermore, upon the irradiation of near-infrared (NIR) light, SeTe-Ag NPs exhibit remarkable antibiofilm and wound-healing capabilities. Overall, this study shows the applications of NIR-active SeTe-Ag NPs, which serve as a versatile platform for biomedical applications.

Ambient Synthesis of Porphyrin-Based Fe-Covalent Organic Frameworks for Efficient Infected Skin Wound Healing

Reactive oxygen species (ROS) have emerged as a promising treatment option for antibacterial and biofilm eradication. However, their therapeutic efficacy is significantly hampered by the unique microenvironments of diabetic wounds. In this study, we designed and synthesized porphyrin-based Fe covalent organic frameworks (Fe-COF) through a Schiff base condensation reaction. Subsequently, Fe-COF were encapsulated with hyaluronic acid (HA) through electrostatic adsorption, resulting in a novel formulation named HA-Fe-COF for diabetic wound healing. HA-Fe-COF were engineered to respond to hyaluronidase in the infected wound, leading to the controlled release of Fe-COF. Those released Fe-COF served a dual role as photosensitizers, generating singlet oxygen and localized heating when exposed to dual light sources. Additionally, they acted as peroxidase-like nanozymes, facilitating the production of ROS through enzymatic reactions. This innovative approach enabled a synergistic therapeutic effect combining photodynamic, photothermal, and chemodynamic modalities. Furthermore, the sustained release of HA from HA-Fe-COF promoted angiogenesis, collagen deposition, and re-epithelialization during the diabetic wound healing process. This "all-in-one" strategy offers a novel approach for the development of antimicrobial and biofilm eradication strategies that minimize damage to healthy tissues in vivo.

A universal strategy to enhance photothermal conversion efficiency by regulating the molecular aggregation states for safe photothermal therapy of bacterial infections

Photothermal therapy (PTT) has emerged as a promising approach for treating bacterial infections. However, achieving a high photothermal conversion efficiency (PCE) of photothermal agents (PTAs) remains a challenge. Such a problem is usually compensated by the use of a high-intensity laser, which inevitably causes tissue damage. Here, we present a universal strategy to enhance PCE by regulating the molecular aggregation states of PTAs within thermoresponsive nanogels. We demonstrate the effectiveness of this approach using aggregation-induced emission (AIE) and aggregation-caused quenching (ACQ) PTAs, showing significant enhancements in PCE without the need for intricate molecular modifications. Notably, the highest PCEs reach up to 80.9% and 64.4% for AIE-NG and ACQ-NG, respectively, which are nearly 2-fold of their self-aggregate counterparts. Moreover, we elucidate the mechanism underlying PCE enhancement, highlighting the role of strong intermolecular π-π interactions facilitated by nanogel-induced volume contraction. Furthermore, we validate the safety and efficacy of this strategy in in vitro and in vivo models of bacterial infections at safe laser power densities, demonstrating its potential for clinical translation. Our findings offer a straightforward, universal, and versatile method to improve PTT outcomes while minimizing cytotoxicity, paving the way for enhanced treatment of bacterial infections with safe PTT protocols.

Nanozyme-Incorporated Microneedles for the Treatment of Chronic Wounds

Acute wounds are converted to chronic wounds due to advanced age and diabetic complications. Nanozymes catalyze ROS production to kill bacteria without causing drug resistance, while microneedles (MNs) can break through the skin barrier to deliver drugs effectively. Nanozymes can be intergrateded into MNs delivery systems to improve painless drug delivery. It can also reduce the effective dose of drug sterilization while increasing delivery efficiency and effectively killing wounded bacteria while preventing drug resistance. This paper describes various types of metal nanozymes from previous studies and compares their mutual enhancement with nanozymes. The pooled results show that the MNs, through material innovation, are able to both penetrate the scab and deliver nanozymes and exert additional anti-inflammatory and bactericidal effects. The catalytic effect of some of the nanozymes can also accelerate the lysis of the MNs or create a cascade reaction against inflammation and infection. However, the issue of increased toxicity associated with skin penetration and clinical translation remains a challenge. This study reviews the latest published results and corresponding challenges associated with the use of MNs combined with nanozymes for the treatment of wounds, providing further information for future research.

Hyaluronan-decorated copper-doxorubicin-anlotinib nanoconjugate for targeted synergistic chemo/chemodynamic/antiangiogenic tritherapy against hepatocellular carcinoma

Copper-based nanomaterials show considerable potential in the chemodynamic therapy of cancers. However, their clinical application is restricted by low catalytic activity in tumor microenvironment and copper-induced tumor angiogenesis. Herein, a novel copper-doxorubicin-anlotinib (CDA) nanoconjugate was constructed by the combination of copper-hydrazide coordination, hydrazone linkage and Schiff base bond. The CDA nanoconjugate consists of a copper-3,3'-dithiobis(propionohydrazide)-doxorubicin core and an anlotinib-hyaluronan shell. Benefiting from hyaluronan camouflage and abundant disulfide bonds and Cu2+, the CDA nanoconjugate possessed excellent tumor-targeting and glutathione-depleting abilities and enhanced chemodynamic efficacy. Released doxorubicin significantly improved copper-mediated chemodynamic therapy by upregulating nicotinamide adenine dinucleotide phosphate oxidase 4 expression to increase intracellular H2O2 level. Furthermore, the nanoconjugate produced excessive •OH to induce lipid peroxidation and mitochondrial dysfunction, thus greatly elevating doxorubicin-mediated chemotherapy. Importantly, anlotinib effectively inhibited the angiogenic potential of copper ions. In a word, the CDA nanoconjugate is successfully constructed by combined coordination and pH-responsive linkages, and displays the great potential of copper-drug conjugate for targeted synergistic chemo/chemodynamic/antiangiogenic triple therapy against cancers.

Tailored Phototherapy Agent by Infection Site In Situ Activated Against Methicillin-Resistant S. aureus

Phototherapy, including photodynamic therapy (PDT) and photothermal therapy (PTT), is a promising treatment approach for multidrug resistant infections. PDT/PTT combination therapy can more efficiently eliminate pathogens without drug resistance. The key to improve the efficacy of photochemotherapy is the utilization efficiency of non-radiation energy of phototherapy agents. Herein, a facile phototherapy molecule (SCy-Le) with the enhancement of non-radiative energy transfer is designed by an acid stimulation under a single laser. Introduction of the protonated receptor into SCy-Le results in a distorted intramolecular charge in the infected acidic microenvironment, pH ≈ 5.5, which in turn, enhances light capture, reduces the singlet-triplet transition energies (ΔES1-T1), promotes electron system crossing, enhances capacity of reactive oxygen species generation, and causes a significant increase in temperature by improving vibrational relaxation. SCy-Le shows more than 99% bacterial killing rate against both methicillin-resistant Staphylococcus aureus and its biofilms in vitro and causes bacteria-induced wound healing in mice. This work will provide a new perspective for the design of phototherapy agents, and the emerging photochemotherapy will be a promising approach to combat the problem of antibiotic resistance.

A Hydrogel Dressing Comprised of Silk Fibroin, Ag Nanoparticles, and Reduced Graphene Oxide for NIR Photothermal-Enhanced Antibacterial Efficiency and Skin Regeneration

Bacterial infection, inflammation, and excessive oxidative stress are the primary factors that contribute to delayed healing of skin wounds. In this study, a multifunctional wound dressing (SF/Ag@rGO hydrogel) is developed to promote the healing of infected skin wounds by combining the inherent antibacterial activity of Ag nanoparticles (NPs) with near-infrared (NIR)-assisted antibacterial therapy. Initially, L-ascorbic acid is used as a reducing agent and PVP-K17 as a stabilizer and dispersant, this facilitates the synthesis of reduced graphene oxide loaded with Ag NPs (Ag@rGO). Ag@rGO is then blended with a silk fibroin (SF) solution to form an instantly gelling SF/Ag@rGO hydrogel that exhibits rapid self-healing, injectability, shape adaptability, NIR responsiveness, antioxidant, high tissue adhesion, and robust mechanical properties. In vitro and in vivo experiments show that the SF/Ag@rGO hydrogel demonstrates strong antioxidant and photothermal antibacterial capabilities, promoting wound healing through angiogenesis, stimulating collagen generation, alleviating inflammation, antioxidant, and promoting cell proliferation, indicating that the SF/Ag@rGO hydrogel dressing is an ideal candidate for clinical treatment of full-thickness bacterial-stained wounds.

Electrospun nanofibers synthesized from polymers incorporated with bioactive compounds for wound healing

The development of innovative wound dressing materials is crucial for effective wound care. It's an active area of research driven by a better understanding of chronic wound pathogenesis. Addressing wound care properly is a clinical challenge, but there is a growing demand for advancements in this field. The synergy of medicinal plants and nanotechnology offers a promising approach to expedite the healing process for both acute and chronic wounds by facilitating the appropriate progression through various healing phases. Metal nanoparticles play an increasingly pivotal role in promoting efficient wound healing and preventing secondary bacterial infections. Their small size and high surface area facilitate enhanced biological interaction and penetration at the wound site. Specifically designed for topical drug delivery, these nanoparticles enable the sustained release of therapeutic molecules, such as growth factors and antibiotics. This targeted approach ensures optimal cell-to-cell interactions, proliferation, and vascularization, fostering effective and controlled wound healing. Nanoscale scaffolds have significant attention due to their attractive properties, including delivery capacity, high porosity and high surface area. They mimic the Extracellular matrix (ECM) and hence biocompatible. In response to the alarming rise of antibiotic-resistant, biohybrid nanofibrous wound dressings are gradually replacing conventional antibiotic delivery systems. This emerging class of wound dressings comprises biopolymeric nanofibers with inherent antibacterial properties, nature-derived compounds, and biofunctional agents. Nanotechnology, diminutive nanomaterials, nanoscaffolds, nanofibers, and biomaterials are harnessed for targeted drug delivery aimed at wound healing. This review article discusses the effects of nanofibrous scaffolds loaded with nanoparticles on wound healing, including biological (in vivo and in vitro) and mechanical outcomes.

Nanoarchitectonics of Bimetallic Cu-/Co-Doped Nitrogen-Carbon Nanozyme-Functionalized Hydrogel with NIR-Responsive Phototherapy for Synergistic Mitigation of Drug-Resistant Bacterial Infections

Superbug infections and transmission have become major challenges in the contemporary medical field. The development of novel antibacterial strategies to efficiently treat bacterial infections and conquer the problem of antimicrobial resistance (AMR) is extremely important. In this paper, a bimetallic CuCo-doped nitrogen-carbon nanozyme-functionalized hydrogel (CuCo/NC-HG) has been successfully constructed. It exhibits photoresponsive-enhanced enzymatic effects under near-infrared (NIR) irradiation (808 nm) with strong peroxidase (POD)-like and oxidase (OXD)-like activities. Upon NIR irradiation, CuCo/NC-HG possesses photodynamic activity for producing singlet oxygen(1O2), and it also has a high photothermal conversion effect, which not only facilitates the elimination of bacteria but also improves the efficiency of reactive oxygen species (ROS) production and accelerates the consumption of GSH. CuCo/NC-HG shows a lower hemolytic rate and better cytocompatibility than CuCo/NC and possesses a positive charge and macroporous skeleton for restricting negatively charged bacteria in the range of ROS destruction, strengthening the antibacterial efficiency. Comparatively, CuCo/NC and CuCo/NC-HG have stronger bactericidal ability against methicillin-resistant Staphylococcus aureus (MRSA) and ampicillin-resistant Escherichia coli (AmprE. coli) through destroying the cell membranes with a negligible occurrence of AMR. More importantly, CuCo/NC-HG plus NIR irradiation can exhibit satisfactory bactericidal performance in the absence of H2O2, avoiding the toxicity from high-concentration H2O2. In vivo evaluation has been conducted using a mouse wound infection model and histological analyses, and the results show that CuCo/NC-HG upon NIR irradiation can efficiently suppress bacterial infections and promote wound healing, without causing inflammation and tissue adhesions.

Mussel-inspired near-infrared light-responsive gelatin-based hydrogels for enhancing MRSA-infected wound healing

Infected wound management is a great challenge to healthcare, especially in emergencies such as accidents or battlefields. Hydrogels as wound dressings can replace or supplement traditional wound treatment strategies, such as bandages or sutures. It is significant to develop novel hydrogel-based wound dressings with simple operation, inexpensive, easy debridement, effective antibacterial, biocompatibility, etc. Here, we designed a novel gelatin-based hydrogel wound dressing Gel-TA-Fe3+. The hydrogels used tannic-modified gelatin as the main body and Fe3+ as the crosslinking agent to achieve a controllable rapid sol-gel transition. The hydrogels exhibited tough mechanical properties, excellent antibacterial ability, biocompatibility and an acceptable temperature response to near-infrared light (NIR). Moreover, the hydrogels could promote the healing process of MRSA-infected skin wound in rats. This multifunctional hydrogel was thought to have potential for emergency treatment of bacterial infected wound.

Towards promoting wound healing: A near-infrared light-triggered persistently antibacterial, synergistically hemostatic nanoarchitecture-integrated chitosan hydrogel

The skin, the primary barrier of the body, is inevitably broken. However, the development of materials that facilitate wound healing with sustained antimicrobial, hemostatic, and biocompatible properties remains a formidable challenge. In this article, we prepared a photopolymerizable composite hydrogel consisting of a hydrogel matrix, a hemostatic/antibacterial agent, and a photothermal therapy agent. The photopolymerizable hydrogel matrix was prepared by grafting the photoinitiator and polymerizable active monomer onto the chitosan chain segment, which exhibits excellent biocompatibility. Furthermore, linalool is adsorbed on the surface of halloysite nanotubes (HNTs) to form a hemostatic and antibacterial. Meanwhile, dopamine is employed as a coating material for hollow glass microsphere (HGM), which enables them to function as photothermal therapy agents. Upon exposure to near-infrared radiation, the PHA hydrogel releases linalool molecules from the surface of the HNTs, which diffuse into the hydrogel matrix, resulting in a sustained antimicrobial effect. At the same time, rapid curing of the photopolymerizable hydrogel under UV light forms a physical barrier that synergistically enhances the hemostatic properties of the HNTs. From the above, the results pave the way to develop a potential hemostatic antimicrobial dressing for clinical use in wound healing.

Metal-Phenolic Nanocapsules with Photothermal Antibacterial and Ros Scavenging Ability for Diabetic Wound Healing

The presence of bacteria in diabetic wounds not only leads to the formation of biofilms but also triggers oxidative stress and inflammatory responses, which hinder the wound-healing process. Therefore, it is imperative to formulate a comprehensive strategy that can proficiently eliminate bacteria and enhance the wound microenvironment. Herein, this work develops multifunctional metal-phenolic nanozymes (TA-Fe/Cu nanocapsules), wherein the one-pot coordination of tannic acid (TA)and Fe3+/Cu2+ using a self-sacrificial template afforded hollow nanoparticles (NPs) with exceptional photothermal and reactive oxygen species scavenging capabilities. After photothermal disruption of the biofilms, TA-Fe/Cu NPs autonomously capture bacteria through hydrogen bonding interactions with peptidoglycans (the bacterial cell wall component), ultimately bolstering the bactericidal efficacy. Furthermore, these NPs exhibit peroxidase-like enzymatic activity, efficiently eliminating surplus hydrogen peroxide in the vicinity of the wound and mitigating inflammatory responses. As the wound transitions into the remodeling phase, the presence of Cu2+ stimulates vascular migration and regeneration, expediting the wound-healing process. This study innovatively devises a minimalist approach to synthesize multifunctional metal-phenolic nanozymes integrating potent photothermal antibacterial activity, bacterial capture, anti-inflammatory, and angiogenesis properties, showcasing their great potential for diabetic wound treatment.

Cuprorivaite/hardystonite/alginate composite hydrogel with thermionic effect for the treatment of peri-implant lesion

Peri-implant lesion is a grave condition afflicting numerous indi-viduals with dental implants. It results from persistent periodontal bacteria accumulation causing inflammation around the implant site, which can primarily lead to implant loosening and ultimately the implant loss. Early-stage peri-implant lesions exhibit symptoms akin to gum disease, including swelling, redness and bleeding of the gums surrounding the implant. These signs indicate infection and inflammation of the peri-implant tissues, which may result in bone loss and implant failure. To address this problem, a thermionic strategy was applied by designing a cuprorivaite-hardystonite bioceramic/alginate composite hydrogel with photothermal and Cu/Zn/Si multiple ions releasing property. This innovative approach creates a thermionic effect by the release of bioactive ions (Cu2+ and Zn2+ and SiO 3 2 - ) from the composite hydrogel and the mild heat environment though the photothermal effect of the composite hydrogel induced by near-infrared light irradiation. The most distinctive advantage of this thermionic effect is to substantially eliminate periodontal pathogenic bacteria and inhibit inflammation, while simultaneously enhance peri-implant osseointegration. This unique attribute renders the use of this composite hydrogel highly effective in significantly improving the survival rate of implants after intervention in peri-implant lesions, which is a clinical challenge in periodontics. This study reveals application potential of a new biomaterial-based approach for peri-implant lesion, as it not only eliminates the infection and inflammation, but also enhances the osteointegration of the dental implant, which provides theoretical insights and practical guidance to prevent and manage early-stage peri-implant lesion using bioactive functional materials.

Compartmentalization into Outer and Inner Shells of Hollow Nanospheres for Antibiosis Based on Chemistry and Physical Damages

There is a substantially ascending demand for nonantibiotic strategies to overcome the resistance of bacterial infections. Here, the discovery of a distinctive antibacterial structure is reported. The novel structure of nanoparticle strategy is proposed for appreciable bacteria killing by the smart design of the delayed addition of crosslinkers into the reaction mixture. [2-(methacryloyloxy)ethyl]trimethylammonium chloride solution (MTCl), a water-soluble ionic liquid (IL), has narrow-size material distribution, good whiteness, and high weather resistance. The quaternary ammonium salt is utilized to efficiently permeate cell membranes through electrostatic interaction, accordingly, boasting a beneficiary of antibacterial properties. More importantly, it allows bacteria to attach the nanomaterials easily, especially the double-shelled nanosphere. In light of the introduction of 9-amino(9-deoxy)ep-quinine (QNNH2) on its inner shell, it blocks the nucleic acid and glucose metabolism in bacteria, which is betterment of the antibacterial activity of double-shelled structure nanoparticle compared to other structure of nanomaterials. This physical/chemical/biological triple antibacterial process eliminates the need for traditional antibiotics, and the fabrication strategies and material properties described here provide insights into the design of antibacterial nanomaterials based on chemical and physical effects.

H2O2 self-supplying and GSH-depleting nanosystem for amplified NIR mediated-chemodynamic therapy of MRSA biofilm-associated infections

Reactive oxygen species (ROS) has emerged as potent therapeutic agents for biofilm-associated bacterial infections. Chemodynamic therapy (CDT), involving the generation of high-energy ROS, displays great potential in the therapy of bacterial infections. However, challenges such as insufficient hydrogen peroxide (H2O2) and over-expressed glutathione (GSH) levels within the microenvironment of bacterial biofilms severely limit the antibacterial efficacy of CDT. Herein, we have developed a multifunctional nanoplatform (CuS@CaO2@Dex) by integrating copper sulfide (CuS) and calcium peroxide (CaO2) into dextran (Dex)-coated nanoparticles. This innovative platform enhanced ROS generation for highly efficient biofilm elimination by simultaneously supplying H2O2 and depleting GSH. The Dex-coating facilitated the penetrability of CuS@CaO2@Dex into biofilms, while CaO2 generated a substantial amount of H2O2 in the acidic biofilm microenvironment. CuS, through a Fenton-like reaction, catalyzed the conversion of self-supplied H2O2 into hydroxyl radicals (•OH) and consumed the overexpressed GSH. Additionally, the incorporation of near-infrared II (NIR II) laser irradiation enhanced the photothermal properties of CuS, improving the catalytic efficiency of the Fenton-like reaction for enhanced antibacterial effects. In vivo experiments have demonstrated that CuS@CaO2@Dex exhibited remarkable antibacterial and antibiofilm efficacy, exceptional wound healing capabilities, and notable biosafety. In summary, the Dex-coated nanoplatform proposed in this study, with its self-sterilization capability through ROS, holds significant potential for future biomedical applications.

Postsynthetic Modification of Thermo-Treated Metal-Organic Framework for Combined Photothermal/Photodynamic Antibacterial Therapy

Metal-organic frameworks (MOFs) are emerging porous materials that can serve as carriers of photosensitizers and photothermal agents. Meanwhile, a large number of active sites in MOFs endow them with the characteristics of modification by postsynthetic modification. Herein, a dual-modal PDT/PTT therapeutic agent HMIL-121-acriflavine-tetrakis (4-amoniophenyl) porphyrin (HMIL-ACF-Por), prepared by the postsynthetic modification of the MOF (HMIL-121), was reported for antibacterial applications. The prepared HMIL-ACF-Por enables the generation of abundant reactive oxygen species, including the superoxide anion radical (O2-) and singlet oxygen (1O2), and thermal energy under 808 nm NIR laser irradiation. HMIL-ACF-Por showed good antibacterial ability against Escherichia coli and Staphylococcus aureus in vitro. Meanwhile, HMIL-ACF-Por can effectively inhibit the inflammatory response caused by bacterial infection and accelerate S. aureus-infected wound healing under laser irradiation owing to the synergistic effect of photodynamic therapy (PDT) and photothermal therapy (PTT). These results demonstrate that HMIL-ACF-Por is a promising PDT/PTT therapeutic agent. This work also contributes to offering an effective solution for treating bacterial infections and promotes the application of MOF-based materials in biomedicine.

Advanced nanozymes possess peroxidase-like catalytic activities in biomedical and antibacterial fields: review and progress

Infectious diseases caused by bacterial invasions have imposed a significant global health and economic burden. More worryingly, multidrug-resistant (MDR) pathogenic bacteria born under the abuse of antibiotics have further escalated the status quo. Nowadays, at the crossroads of multiple disciplines such as chemistry, nanoscience and biomedicine, nanozymes, as enzyme-mimicking nanomaterials, not only possess excellent bactericidal ability but also reduce the possibility of inducing resistance. Thus, nanozymes are promising to serve as an alternative to traditional antibiotics. Nanozymes that mimic peroxidase (POD) activity are also known as POD nanozymes. In recent years, POD nanozymes have become one of the most frequently reported and effective nanozymes due to their broad-spectrum bactericidal properties and unique sterilization mechanism. In this review, we introduce the mechanism as well as the classification of POD nanozymes. More importantly, to further improve the antibacterial efficacy of POD nanozymes, we elaborate on three aspects: (1) improving the physicochemical properties; (2) regulating the catalytic microenvironment; and (3) designing multimodel POD nanozymes. In addition, we review the nanosafety of POD nanozymes for discussing their potential toxicity. Finally, the remaining challenges of POD nanozymes and possible future directions are discussed. This work provides a systematic summary of POD nanozymes and hopefully contributes to the early clinical translation.

One-Stop Integrated Nanoagent for Bacterial Biofilm Eradication and Wound Disinfection

To meet the requirements of biomedical applications in the antibacterial realm, it is of great importance to explore nano-antibiotics for wound disinfection that can prevent the development of drug resistance and possess outstanding biocompatibility. Therefore, we attempted to synthesize an atomically dispersed ion (Fe) on phenolic carbon quantum dots (CQDs) combined with an organic photothermal agent (PTA) (Fe@SAC CQDs/PTA) via a hydrothermal/ultrasound method. Fe@SAC CQDs adequately exerted peroxidase-like activity while the PTA presented excellent photothermal conversion capability, which provided enormous potential in antibacterial applications. Based on our work, Fe@SAC CQDs/PTA exhibited excellent eradication of Escherichia coli (>99% inactivation efficiency) and Staphylococcus aureus (>99% inactivation efficiency) based on synergistic chemodynamic therapy (CDT) and photothermal therapy (PTT). Moreover, in vitro experiments demonstrated that Fe@SAC CQDs/PTA could inhibit microbial growth and promote bacterial biofilm destruction. In vivo experiments suggested that Fe@SAC CQDs/PTA-mediated synergistic CDT and PTT exhibited great promotion to wound disinfection and recovery effects. This work indicated that Fe@SAC CQDs/PTA could serve as a broad-spectrum antimicrobial nano-antibiotic, which was simultaneously beneficial for bacterial biofilm eradication, wound disinfection, and wound healing.

Chemically Tailored Single Atoms for Targeted and Light-Controlled Bactericidal Activity

Single-atom (SA) nanoparticles exhibit considerable potential in terms of photothermal properties for bactericidal applications. Nevertheless, the restricted efficacy of their targeted and controlled antibacterial activity has hindered their practical implementation. This study aims to overcome this obstacle by employing chemical modifications to tailor SAs, thereby achieving targeted and light-controlled antimicrobial effects. By conducting atomic-level modifications on palladium SAs using glutathione (GSH) and mercaptophenylboronic acid (MBA), their superior targeted binding capabilities toward Escherichia coli cells are demonstrated, surpassing those of SAs modified with cysteine (Cys). Moreover, these modified SAs effectively inhibit wound bacteria proliferation and promote wound healing in rats, without inducing noticeable toxicity to major organs under 808 nm laser irradiation. This study highlights the significance of chemical engineering in tailoring the antibacterial properties of SA nanoparticles, opening avenues for combating bacterial infections and advancing nanoparticle-based therapies.

NIR Plasmonic Nanozymes: Synergistic Enhancement Mechanism and Multi-Modal Anti-Infection Applications of MXene/MOFs

Nanozymes are considered as the promising antimicrobial agents due to the enzyme-like activity for chemo-dynamic therapy (CDT). However, it remains a challenge to develop novel nanozyme systems for achieving stimuli-responsive, and efficient nanozyme catalysis with multimodal synergistic enhancement. In this work, a near-infrared (NIR) plasmonic-enhanced nanozyme catalysis and photothermal performance for effective antimicrobial applications are proposed. A Ti3 C2 MXene/Fe-MOFs composite (MXM) with NIR plasmonic-enhanced CDT combined with photothermal properties is successfully developed by loading metal-organic framework (MOF) nanozymes onto Ti3 C2 MXene. The mechanism of NIR induced localized surface plasmon resonance (LSPR)-enhanced CDT and photothermal therapy (PTT) is well explained through activation energy (Ea ), electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS), fluorescence analysis experiments, and finite element simulation. It reveals that MXene nanosheets exhibit NIR plasmon exciters and generate hot electrons that can transfer to the surface of Fe-MOFs, promoting the Fenton reaction and enhances CDT. While the photothermal heating of MXene produced by LSPR can also boost the CDT of Fe-MOFs under NIR irradiation. Both in vitro and in vivo experimental results demonstrate that LSPR-induced MXM system has outstanding antimicrobial properties, can promote angiogenesis and collagen deposition, leading to the accelerated wound healing.

Revolutionary Pyrazole-based Aza-BODIPY: Harnessing Photothermal Power Against Cancer Cells and Bacteria

In the realm of cancer therapy and treatment of bacterial infection, photothermal therapy (PTT) stands out as a potential strategy. The challenge, however, is to create photothermal agents that can perform both imaging and PTT, a so-called theranostic agent. Photothermal agents that absorb and emit in the near-infrared region (750-900 nm) have recently received a lot of attention due to the extensive penetration of NIR light in biological tissues. In this study, we combined pyrazole with aza-BODIPY (PY-AZB) to develop a novel photothermal agent. PY-AZB demonstrated great photostability with a photothermal conversion efficiency (PCE) of up to 33 %. Additionally, PY-AZB can permeate cancer cells at a fast accumulation rate in less than 6 hours, according to the confocal images. Furthermore, in vitro photothermal therapy results showed that PY-AZB effectively eliminated cancer cells by up to 70 %. Interestingly, PY-AZB exhibited antibacterial activities against both gram-negative bacteria, Escherichia coli 780, and gram-positive bacteria, Staphylococcus aureus 1466. The results exhibit a satisfactory bactericidal effect against bacteria, with a killing efficiency of up to 100 % upon laser irradiation. As a result, PY-AZB may provide a viable option for photothermal treatment.

Near-infrared Ⅱ light-assisted Cu-containing porous TiO2 coating for combating implant-associated infection

Treatment implant-associated infections remains a severe challenge in the clinical practice. This work focuses on the fabrication of Cu-containing porous TiO2 coatings on titanium (Ti) by a combination of magnetron sputtering and dealloying techniques. Additionally, photothermal therapy is employed to enhance the effect of Cu ions in preventing bacterial infection. After the dealloying, most of Cu element was removed from the magnetron sputtered Cu-containing films, and porous TiO2 coatings were prepared on Ti. The formation of porous nanostructures significantly enhanced the photothermal conversion performance under NIR-II light irradiation. The combined effect of hyperthermia and Cu ions demonstrated enhanced antibacterial activity in both in vitro and in vivo experiments, and the antibacterial efficiency can reach 99% against Streptococcus mutans. Moreover, the porous TiO2 coatings also exhibited excellent biocompatibility. This modification of the titanium surface structure through dealloying changes may offer a novel approach to enhance the antimicrobial properties of titanium implants.

Metal-Phenolic Network with Pd Nanoparticle Nodes Synergizes Oxidase-Like and Photothermal Properties to Eradicate Oral Polymicrobial Biofilm-Associated Infections

Designing an effective treatment strategy to combat oral diseases caused by complex polymicrobial biofilms remains a great challenge. Herein, a series of metal-phenolic network with Pd nanoparticle nodes using polyphenols as stabilizers and reducing agents is constructed. Among them, sulfonated lignin-Pd (SLS-Pd) with ultrafine size palladium nanoparticles and broadband near infrared absorption exhibit excellent oxidase-like activity and stable photothermal effect. In vitro experiments demonstrate that the superoxide radical generated by SLS-Pd oxidase-like activity exhibits selective antibacterial effects, while its photothermal effect induced hyperthermia exhibits potent antifungal properties. This difference is further elucidated by RNA-sequencing analysis and all-atom simulation. Moreover, the SLS-Pd-mediated synergistic antimicrobial system exhibits remarkable efficacy in combating various biofilms and polymicrobial biofilms. By establishing a root canal model and an oropharyngeal candidiasis model, the feasibility of the synergistic antimicrobial system in treating oral biofilm-related infections is further validated. This system provides a promising therapeutic approach for polymicrobial biofilm-associated infections in the oral cavity.

Dual Mg-Reinforced PCL Membrane with a Janus Structure for Vascularized Bone Regeneration and Bacterial Elimination

Commercially available guided bone regeneration (GBR) membranes often exhibit limited mechanical properties or bioactivity, leading to poor performance in repairing bone defects. To surmount this limitation, we developed a Janus structural composite membrane (Mg-MgO/PCL) reinforced by dual Mg (Mg sheets and MgO NPs) by using a combined processing technique involving casting and electrospinning. Results showed that the addition of Mg sheets and MgO NPs enhanced the mechanical properties of the composite membrane for osteogenic space maintenance, specifically tensile strength (from 10.2 ± 1.2 to 50.3 ± 4.5 MPa) and compression force (from 0 to 0.94 ± 0.09 N mm-1), through Mg sheet reinforcement and improved crystallization. The dense cast side of the Janus structure membrane displayed better fibroblast barrier capacity than a single fiber structure; meanwhile, the PCL matrix protected the Mg sheet from severe corrosion due to predeformation. The porous microfibers side supported preosteoblast cell adhesion, enhanced osteogenesis, and angiogenesis in vitro, through the biomimetic extracellular matrix and sustainable Mg2+ release. Furthermore, the Mg-MgO/PCL membrane incorporating 2 wt % MgO NPs exhibited remarkable antimicrobial properties, inducing over 88.75% apoptosis in Staphylococcus aureus. An in vivo experiment using the rat skull defect model (Φ = 5 mm) confirmed that the Mg-MgO/PCL membrane significantly improved new bone formation postsurgery. Collectively, our investigation provides valuable insights into the design of multifunctional membranes for clinical oral GBR application.

Facile one-pot synthesis of flower-like ellagic acid microparticles incorporating anti-microbial peptides for enhanced wound healing

Anti-microbial peptides (AMPs) have gained significant attention as potential antimicrobial agents due to their cytocompatibility and reduced drug resistance. However, AMPs often suffer from low stability due to their vulnerable molecular structure. This study presents a one-pot synthesis method for ellagic acid (EA)-based, flower-like AMPs@EAMP particles, combining the antibacterial properties of EA with AMPs. The resulting particles exhibit an enlarged surface area for the adsorption or embedding of AMPs, enhancing their antibacterial efficacy. Furthermore, in vitro evaluations demonstrate excellent biocompatibility and broad-spectrum activity against bacterial strains including both Gram-positive S. epidermidis and Gram-negative E. coli. In vivo studies indicate AMPs@EAMPs' potential to reconstruct the immune barrier, inhibit pathogens, and reduce inflammation, promoting orderly tissue repair. This innovative synthesis strategy provides a straightforward and effective approach for large-scale production of flower-like AMPs@EAMP particles with remarkable antibacterial properties, addressing the challenges associated with MDR infections.

Propelling CuCo-based nanozyme design to new heights through triple enzyme-like power for high-efficiency bacterial eradication

Bacterial infection-related diseases are a serious issue that threatens human health, and it is highly desirable to develop a high-performance antibacterial agent to combat it. Herein, copper/cobalt-based metal sulfide nanoparticles (CCS NPs) as a new kind of antibacterial nanozyme were prepared by a facile hydrothermal method. Owing to its rich chemical states, the CCS NPs with intrinsic peroxidase- and oxidase-like activities could generate reactive oxygen species (ROS) to exert bactericidal capacity. The CCS NPs could also rapidly deplete glutathione (GSH) to aggravate the oxidative stress in bacteria, thus enhancing the sterilization effect. The results showed that, with the assistance of H2O2 at low concentrations, CCS NPs possessing peroxidase-like, oxidase-like, and GSH depletion activities could achieve remarkable antibacterial effects in vitro. The in vivo implantation demonstrated that CCS NPs with triple enzyme-like activities had efficient bacteria elimination and good biocompatibility in treating bacteria-infected wounds, indicating its wide potential application in the non-antibiotic treatment of bacteria-infected wounds.

Heterogeneous Cu2O-SnO2 doped polydopamine fenton-like nanoenzymes for synergetic photothermal-chemodynamic antibacterial application

Wound infections caused by drug-resistant bacteria pose a great threat to human health, and the development of non-drug-resistant antibacterial approaches has become a research priority. In this study, we developed Cu2O-SnO2 doped polydopamine (CSPDA) triple cubic antibacterial nanoenzymes with high photothermal conversion efficiency and good Fenton-like catalase performance. CSPDA antibacterial nanoplatform can catalyze the generation of hydroxyl radical (·OH) from H2O2 at low concentration (50 μg∙mL-1) under 808 nm near-infrared (NIR) irradiation to achieve a combined photothermal therapy (PTT) and chemodynamic therapy (CDT). And the CSPDA antibacterial nanoplatform displays broad-spectrum and long-lasting antibacterial effects against both Gram-negative Escherichia coli (100 %) and Gram-positive Staphylococcus aureus (100 %) in vitro. Moreover, in a mouse wound model with mixed bacterial infection, the nanoplatform demonstrates a significant in vivo bactericidal effect while remaining good cytocompatible. To conclude, this study successfully develops an efficient and long-lasting bacterial infection treatment system. This system provided different options for future studies on the design of synergistic antimicrobial therapy. Hence, the as-synthesized synergetic photothermal therapy and chemodynamic therapy nanoenzymes have rapid and long-term bactericidal ability, well-conglutinant performance and effectively preventing wound infection for clinical application. STATEMENT OF SIGNIFICANCE: Wound infections caused by drug-resistant bacteria pose a great threat to human health, and the development of non-drug-resistant antibacterial approaches has become a research priority. In this study, we developed Cu2O-SnO2 doped polydopamine (CSPDA) triple cubic yolk-like antibacterial nanoenzymes with high photothermal conversion efficiency and Fenton-like catalase effect for photothermal and Chemodynamic antibacterial therapy, Meanwhile, the nanocomposites exhibit good antibioadhesion in a natural water environment for a long-time immersion. In conclusion, this study successfully develops an efficient and long-lasting bacterial infection treatment system. These findings present a pioneering strategy for future research on the design of synergistic antibacterial and antibioadhesive systems.

Heterogeneity of dispersed species in nickel-loaded carbon-based catalysts for near-infrared photoresponsive synergistic antimicrobial therapy

The development of novel efficient, safe antimicrobial strategies is an urgent need, as the misuse of antibiotics has become a significant threat to human health. Therefore, we have loaded metal Ni with environmentally friendly carbon black as a substrate, with species varying from single atoms to nanoclusters and nanoparticles. The results obtained from the antimicrobial systems and the role of different types of metal species in the photosensitized antimicrobial reactions were compared to better understand the catalytic behavior of different metal entities (single atoms, nanoclusters, and nanoparticles). Furthermore, the antimicrobial mechanisms of these materials were described by physical and chemical characterization, biological experiments, and theoretical calculations. Such systematic studies provide new ideas and prospects for developing more efficient and environmentally friendly antimicrobial materials.

Biomimetic dual-nanozymes with catalytic cascade reactions against diabetic wound infection

Diabetes-related chronic wounds characterized by hyperglycemia and weak alkaline milieu provide numerous advantages for bacteria growth and biofilm formation, setting a myriad of stumbling blocks for wound healing. Therefore, reshaping the spatially and temporally pathological wound microenvironment against bacterial infection is critical to rescue stalled healing progress in diabetes-related chronic wounds. Herein, we demonstrate on the room-temperature construction of a glucose oxidase (GOx)-mimicking and peroxidase (POD)-mimicking dual-nanozymes catalytic cascade system upon the partial reduction of Fe3+ to Fe2+ and the deposition of Au nanoparticles, simultaneously. The as-prepared dual-nanozymes catalytic cascade system possesses the capabilities of reshaping the pathological microenvironments of diabetic wound via glucose consumption and acidification, leading to amplified catalytic cascade activities for sterilization. On the one hand, the GOx-mimicking enzymatic activity of the catalytic cascade system can not only deplete glucose and acidize wound milieu to inhibit bacteria growth, but also utilize the weak alkaline milieu of diabetic wound to provide sufficient H2O2 and a favorable pH for subsequent OH generation. On the other hand, the POD-mimicking enzymatic activity of the catalytic cascade system can continuously produce OH for sterilization under the weak acidic milieu in the presence of abundant H2O2. Benefiting from the simply and mild preparation process and the excellent dual-nanozymes catalytic cascade activities under the deliberate evolved milieus of diabetes-related chronic wounds, our catalytic cascade system exhibits the promising healing effect and clinical translation potential against diabetic wound infection.

An Integrative Bioorthogonal Nanoengineering Strategy for Dynamically Constructing Heterogenous Tumor Spheroids

Although tumor models have revolutionized perspectives on cancer aetiology and treatment, current cell culture methods remain challenges in constructing organotypic tumor with in vivo-like complexity, especially native characteristics, leading to unpredictable results for in vivo responses. Herein, the bioorthogonal nanoengineering strategy (BONE) for building photothermal dynamic tumor spheroids is developed. In this process, biosynthetic machinery incorporated bioorthogonal azide reporters into cell surface glycoconjugates, followed by reacting with multivalent click ligand (ClickRod) that is composed of hyaluronic acid-functionalized gold nanorod carrying dibenzocyclooctyne moieties, resulting in rapid construction of tumor spheroids. BONE can effectively assemble different cancer cells and immune cells together to construct heterogenous tumor spheroids is identified. Particularly, ClickRod exhibited favorable photothermal activity, which precisely promoted cell activity and shaped physiological microenvironment, leading to formation of dynamic features of original tumor, such as heterogeneous cell population and pluripotency, different maturation levels, and physiological gradients. Importantly, BONE not only offered a promising platform for investigating tumorigenesis and therapeutic response, but also improved establishment of subcutaneous xenograft model under mild photo-stimulation, thereby significantly advancing cancer research. Therefore, the first bioorthogonal nanoengineering strategy for developing dynamic tumor models, which have the potential for bridging gaps between in vitro and in vivo research is presented.

Nanomaterials-Enabled Physicochemical Antibacterial Therapeutics: Toward the Antibiotic-Free Disinfections

Bacterial infection continues to be an increasing global health problem with the most widely accepted treatment paradigms restricted to antibiotics. However, the overuse and misuse of antibiotics have triggered multidrug resistance of bacteria, frustrating therapeutic outcomes, and leading to higher mortality rates. Even worse, the tendency of bacteria to form biofilms on living and nonliving surfaces further increases the difficulty in confronting bacteria because the extracellular matrix can act as a robust barrier to prevent the penetration of antibiotics and resist environmental damage. As a result, the inability to eliminate bacteria and biofilms often leads to persistent infection, implant failure, and device damage. Therefore, it is of paramount importance to develop alternative antimicrobial agents while avoiding the generation of bacterial resistance to prevent the large-scale growth of bacterial resistance. In recent years, nano-antibacterial materials have played a vital role in the antibacterial field because of their excellent physical and chemical properties. This review focuses on new physicochemical antibacterial strategies and versatile antibacterial nanomaterials, especially the mechanism and types of 2D antibacterial nanomaterials. In addition, this advanced review provides guidance on the development direction of antibiotic-free disinfections in the antibacterial field in the future.

Super-assembly platform for diverse nanoparticles with tunable topological architectures and surface morphologies

Self-assembly leveraged by nature enables the sophisticated generation of a wide range of nanoparticles (NPs) with rich architectures and morphologies. However, existing artificial self-assembly platforms largely only allow for the fabrication of single type of NPs with limited structures, due to their inability to define interfacial interaction between seeds and growth materials, which is critically important to gain controllable growth patterns of the grown materials on the seeds' surface. Here, we report a versatile super-assembly platform that shows the capabilities to fabricate diverse NPs with tunable topological architectures and surface morphologies, e.g., molecular-like NPs, hollow asymmetric NPs, patchy NPs, etc. We unprecedentedly discovered the powerful functions of polyvinylpyrrolidone (PVP), which enable us to well define interfacial interaction between growth materials and seeds to achieve the controllable and tunable generation of various complex topological growth patterns. Moreover, the nucleation pattern (island nucleation or layered nucleation) of the patches can be thermodynamically modulated via the polarity of the solvent, while the number and size of the patches can be kinetically tuned by the ratio of polystyrene (PS), precursor, and catalyst. Interestingly, the hollow NPs can be generated by single-one processing step in our platform, unlike the multiple steps laboriously and widely employed by previously reported fabrication platforms. In addition, we demonstrate that our annealed NPs can not only selectively reflect visible light, and show well-controlled colors from gray, blue, to green, but also exhibit excellent photothermal conversion performances with a high photothermal conversion efficiency of 68.7% that are superior to currently routinely reported of 40%. This super-assembly platform can serve as a powerful toolset to sophisticatedly create varied NPs with tunable hierarchical architectures and controllable surface morphologies, which would significantly benefit the development of drug delivery, nanomaterial assembly, nano pigments, nanoreactors, and beyond.

Aptamer and DNAzyme-Functionalized Cu-MOF Hybrid Nanozymes for the Monitoring and Management of Bacteria-Infected Wounds

Metal-organic frameworks (MOFs) with peroxidase (POD)-like activity have great potential for combating drug-resistant bacterial infections. However, the use of POD-like activities is severely limited by low oxygen levels and high levels of glutathione (GSH) within the microenvironment of bacterial infection. Herein, G-quadruplex/hemin DNAzyme-aptamer probes and tannic acid-chelated Au nanoparticle (Au-TA)-decorated Cu-based MOF nanosheets (termed GATC) with triple-enzyme activities were developed for visual detection and efficient antibacterial therapy. First, the monometallic MOFs (Cu-ZIF) showed the best catalytic and loading capacity performance compared with the bimetallic MOFs (CoCu-ZIF and ZnCu-ZIF). Then, Cu-MOFs, Au-TA, and DNAzyme improve the POD-like activity to generate more hydroxyl radicals (•OH) to kill bacteria. GATC can bind to bacteria through aptamer recognition, increasing the bacterial surface contact area for efficient antibacterial activity. GATC can decompose H2O2 into O2 to alleviate hypoxia and improve the microenvironment due to its catalase (CAT)-like activity. In addition, GATC exhibited GSH peroxidase-like activity, which can avoid the loss of •OH and result in bacterial death more easily. Compared with previous studies, GATC exhibited extraordinary bactericidal ability at an extremely low dosage of 3 μg/mL against methicillin-resistant Staphylococcus aureus (MRSA). Notably, the GATC-catalyzed chromogenic reaction could accurately monitor the MRSA infection treatment process. Overall, this work could establish a therapeutic platform for the monitoring and management of bacteria-infected wounds.

Photothermal antibacterial materials to promote wound healing

Wound healing is a crucial process that restores the integrity and function of the skin and other tissues after injury. However, external factors, such as infection and inflammation, can impair wound healing and cause severe tissue damage. Therefore, developing new drugs or methods to promote wound healing is of great significance. Photothermal therapy (PTT) is a promising technique that uses photothermal agents (PTAs) to convert near-infrared radiation into heat, which can eliminate bacteria and stimulate tissue regeneration. PTT has the advantages of high efficiency, controllability, and low drug resistance. Hence, nanomaterial-based PTT and its related strategies have been widely explored for wound healing applications. However, a comprehensive review of PTT-related strategies for wound healing is still lacking. In this review, we introduce the physiological mechanisms and influencing factors of wound healing, and summarize the types of PTAs commonly used for wound healing. Then, we discuss the strategies for designing nanocomposites for multimodal combination treatment of wounds. Moreover, we review methods to improve the therapeutic efficacy of PTT for wound healing, such as selecting the appropriate wound dressing form, controlling drug release, and changing the infrared irradiation window. Finally, we address the challenges of PTT in wound healing and suggest future directions.

Amplification of oxidative damage using near-infrared II-mediated photothermal/thermocatalytic effects for periodontitis treatment

Periodontitis is a biofilm-related disease characterized by damage to the periodontal tissue and the development of systemic diseases. However, treatment of periodontitis remains unsatisfactory, especially with deep-tissue infections. This study describes rationally designed multifunctional photothermocatalytic agents for near-infrared-II light-mediated synergistic antibiofilm treatment, through modification of Lu-Bi2Te3 with Fe3O4 and poly(ethylene glycol)-b-poly(l-arginine) (PEG-b-PArg). Notably, 1064-nm laser irradiation led to photothermal/thermocatalytic effects, resulting in the synergistic generation of reactive oxygen species (ROS) and reactive nitrogen species (RNS) and consequent damage to the biofilm. This treatment was based on the thermoelectric and photothermal conversion properties of Lu-Bi2Te3, the peroxidase-like catalytic capacity of Fe3O4, and the guanidinium polymer, PEG-b-PArg. Oxidative damage to biofilm was further enhanced by H2O2, resulting in the effective elimination of biofilm both in vitro and in vivo. These findings suggest that this synergistic therapeutic strategy is effective for the clinical treatment of periodontitis. STATEMENT OF SIGNIFICANCE: The current treatment for periodontitis involves time-consuming and labor-intensive clinical scaling of the teeth. The present study is the first to assess the efficacy of a photothermal catalyst for periodontitis treatment. This used near-infrared-II light at 1064 nm to induce oxidative damage in the biofilm, resulting in its degradation. The synergistic photothermal/thermoelectric effect produced deep tissue penetration and was well tolerated, and can kill the biofilm formed by periodontitis pathogens up to 5 orders of magnitude, effectively treating the biofilm-induced periodontitis.

Dye-sensitized rare-earth-doped nanoprobe for simultaneously enhanced NIR-II imaging and precise treatment of bacterial infection

Methicillin-resistant Staphylococcus aureus (MRSA) is responsible for causing life-threatening infections that result in high morbidity and mortality rates. The development of advanced imaging and therapeutic methods for in vivo diagnosis and treatment of MRSA infections remains challenging. Here, we develop a hybrid nanoplatform based on rare-earth-doped nanoparticles (RENPs) sensitized by a moiety-engineered near-infrared (NIR) TPEO-820 dye and with a ZIF-8 layer that incorporates CysNO, a photochemically triggered nitric oxide donor. We then use the hybrid for both NIR-II bioimaging and photoactivatable treatment of MRSA-infected wounds. We show that the NIR dye sensitization leads to an 8.5-fold enhancement of the downshifting emission and facilitates deep-tissue NIR-II imaging of bacterial infections. Moreover, the sensitization strategy enhances the UV emission of RENPs by two orders of magnitude, leading to the efficiently controllable release of nitric oxide for effective disinfection of MRSA in vitro and in vivo. The hybrid nanoplatform thus offers promising opportunities for simultaneous localization and controllable treatment of MRSA. STATEMENT OF SIGNIFICANCE: Early detection and treatment of MRSA infections are crucial for reducing public health risks. It is a significant challenge that develops sensitive in vivo diagnosis and complete elimination of drug-resistant bacterial infections. Herein, a nanoplatform has been developed for photoactivatable therapy of MRSA infections and deep tissue NIR-II imaging. This platform utilizes lanthanide-doped rare earth nanoparticles (RENPs) that are sensitized by a moiety-engineered near-infrared (NIR) dye TPEO-820. The TPEO-820 sensitized RENPs exhibit 5 times increase in the release of NO concentration for MRSA treatment compared to unsensitized RENPs, enabling precise therapy of MRSA infection both in vitro and in vivo. Moreover, the platform demonstrates NIR-II luminescence in vivo, allowing for sensitive imaging in deep tissue for MRSA infection.

Burgeoning Single-Atom Nanozymes for Efficient Bacterial Elimination

To fight against antibacterial-resistant bacteria-induced infections, the development of highly efficient antibacterial agents with a low risk of inducing resistance is exceedingly urgent. Nanozymes can rapidly kill bacteria with high efficiency by generating reactive oxygen species via enzyme-mimetic catalytic reactions, making them promising alternatives to antibiotics for antibacterial applications. However, insufficient catalytic activity greatly limits the development of nanozymes to eliminate bacterial infection. By increasing atom utilization to the maximum, single-atom nanozymes (SAzymes) with an atomical dispersion of active metal sites manifest superior enzyme-like activities and have achieved great results in antibacterial applications in recent years. In this review, the latest advances in antibacterial SAzymes are summarized, with specific attention to the action mechanism involved in antibacterial applications covering wound disinfection, osteomyelitis treatment, and marine antibiofouling. The remaining challenges and further perspectives of SAzymes for practical antibacterial applications are also discussed.

Tailoring the Surface and Composition of Nanozymes for Enhanced Bacterial Binding and Antibacterial Activity

With the advantages of diverse structures, tunable enzymatic activity, and high stability, nanozymes are widely used in medicine, chemistry, food, environment, and other fields. As an alternative to traditional antibiotics, nanozymes attract more and more attention from the scientific researchers in recent years. Developing nanozymes-based antibacterial materials opens up a new avenue for the bacterial disinfection and sterilization. In this review, the classification of nanozymes and their antibacterial mechanisms are discussed. The surface and composition of nanozymes are critical for the antibacterial efficacy, which can be tailored to enhance both the bacterial binding and the antibacterial activity. On the one hand, the surface modification of nanozymes enables binding and targeting of bacteria that improves the antibacterial performance of nanozymes including the biochemical recognition, the surface charge, and the surface topography. On the other hand, the composition of nanozymes can be modulated to achieve enhanced antibacterial performance including the single nanozyme-mediated synergistic and multiple nanozymes-mediated cascade catalytic antibacterial applications. In addition, the current challenges and future prospects of tailoring nanozymes for antibacterial applications are discussed. This review can provide insights into the design of future nanozymes-based materials for the antibacterial treatments.

Accumulative Rolling Mg/PLLA Composite Membrane with Lamellar Heterostructure for Enhanced Bacteria Inhibition and Rapid Bone Regeneration

Developing composite materials with optimized mechanics, degradation, and bioactivity for bone regeneration has long been a crucial mission. Herein, a multifunctional Mg/Poly-l-lactic acid (Mg/PLLA) composite membrane based on the "materials plain" concept through the accumulative rolling (AR) method is proposed. Results show that at a rolling ratio of 75%, the comprehensive mechanical properties of the membrane in the rolling direction are self-reinforced significantly (elongation at break ≈53.2%, tensile strength ≈104.0 MPa, Young's modulus ≈2.13 GPa). This enhancement is attributed to the directional arrangement and increased crystallization of PLLA molecular chains, as demonstrated by SAXS and DSC results. Furthermore, the AR composite membrane presents a lamellar heterostructure, which not only avoids the accumulation of Mg microparticles (MgMPs) but also regulates the degradation rate. Through the contribution of bioactive MgMPs and their photothermal effect synergistically, the membrane effectively eliminates bacterial infection and accelerates vascularized bone regeneration both in vitro and in vivo. Notably, the membrane exhibits outstanding rat skull bone regeneration performance in only 4 weeks, surpassing most literature reports. In short, this work develops a composite membrane with a "one stone, four birds" effect, opening an efficient avenue toward high-performance orthopedic materials.

Amyloid-like nanofibrous network confined and aligned ultrafine bimetallic nanozymes for smart antibacterial therapy

Nanozyme-based antibacterial therapy (NABT) has emerged as a promising strategy to combat bacterial antimicrobial resistance. Engineering the noble metal nanozymes with strong bacterial capture and high catalytic activity for enhanced NABT is highly anticipated but still challenged. Herein, we developed hybrid nanozymes by engineering ultrafine bimetallic Au/Cu nanoparticles confined on the lysozyme amyloid-like nanofibrous networks (LNF). The introduction of copper in the nanozymes facilitates the H2O2 adsorption and reduces the energy barrier for activating the H2O2 decomposition to form •OH, meanwhile displaying the significantly enhanced POD-like activity under NIR irradiation. Taking advantage of the inherent supramolecular networks inspired from human defensin 6-trapping bacteria mechanism, the hybrid nanozymes effectively capture the bacteria and allow the catalytic attack around the bacterial surfaces to improve the antibacterial efficiency. Finally, the as-prepared nanozymes exhibit the preeminent bactericidal efficacy against bacteria, especially for drug-resistant bacteria both in vitro and in vivo, and the effect on wound healing.

Tailoring the Swelling-Shrinkable Behavior of Hydrogels for Biomedical Applications

Hydrogels with tailor-made swelling-shrinkable properties have aroused considerable interest in numerous biomedical domains. For example, as swelling is a key issue for blood and wound extrudates absorption, the transference of nutrients and metabolites, as well as drug diffusion and release, hydrogels with high swelling capacity have been widely applicated in full-thickness skin wound healing and tissue regeneration, and drug delivery. Nevertheless, in the fields of tissue adhesives and internal soft-tissue wound healing, and bioelectronics, non-swelling hydrogels play very important functions owing to their stable macroscopic dimension and physical performance in physiological environment. Moreover, the negative swelling behavior (i.e., shrinkage) of hydrogels can be exploited to drive noninvasive wound closure, and achieve resolution enhancement of hydrogel scaffolds. In addition, it can help push out the entrapped drugs, thus promote drug release. However, there still has not been a general review of the constructions and biomedical applications of hydrogels from the viewpoint of swelling-shrinkable properties. Therefore, this review summarizes the tactics employed so far in tailoring the swelling-shrinkable properties of hydrogels and their biomedical applications. And a relatively comprehensive understanding of the current progress and future challenge of the hydrogels with different swelling-shrinkable features is provided for potential clinical translations.

Manganese-Iron Dual Single-Atom Catalyst with Enhanced Nanozyme Activity for Wound and Pustule Disinfection

Even though great progress has been achieved in mimicking natural enzyme engineering, few artificial enzymes with efficient catalytic performance and multifunction have been reported. In this study, novel manganese-iron dual single-atom catalysts (Mn/Fe SACs) were synthesized via a hydrothermal/pyrolysis recipe. Iron atoms inside the Mn/Fe SACs adequately exerted the peroxidase (POD)-like activity, its Michaelis-Menten constant, and maximum initial velocity superior to the horseradish peroxidase. Manganese atoms sufficiently catalyzed the H2O2 to generate oxygen (O2), which alleviated the challenge of the continued lack of O2 in the infected wound. In addition, Mn/Fe SACs possess a glutathione oxidase-like activity that further enhanced POD-like activity in the therapeutic process. The antibacterial rates of Mn/Fe SACs were 95 and 94.5% for Escherichia coli and Staphylococcus aureus, respectively. In vitro anti-inflammatory experiments demonstrated that Mn/Fe SACs could regulate the polarization of macrophages into the anti-inflammatory M2 subtype. In vivo wound healing experiments suggested that the combination therapy of Mn/Fe SACs and chemodynamic therapy presented a great promotion of the recovery rate. Moreover, the O2 generated by the catalase-like process contributed to the catalysts permeating the interior of the infected wounds and achieved preferable abscess elimination ability. This work revealed the potential of Mn/Fe SACs as broad-spectrum antimicrobial materials, which provided a novel strategy for treating infected and abscess wounds.

Powering mesoporous silica nanoparticles into bioactive nanoplatforms for antibacterial therapies: strategies and challenges

Bacterial infection has been a major threat to worldwide human health, in particular with the ever-increasing level of antimicrobial resistance. Given the complex microenvironment of bacterial infections, conventional use of antibiotics typically renders a low efficacy in infection control, thus calling for novel strategies for effective antibacterial therapies. As an excellent candidate for antibiotics delivery, mesoporous silica nanoparticles (MSNs) demonstrate unique physicochemical advantages in antibacterial therapies. Beyond the delivery capability, extensive efforts have been devoted in engineering MSNs to be bioactive to further synergize the therapeutic effect in infection control. In this review, we critically reviewed the essential properties of MSNs that benefit their antibacterial application, followed by a themed summary of strategies in manipulating MSNs into bioactive nanoplatforms for enhanced antibacterial therapies. The chemically functionalized platform, photo-synergized platform, physical antibacterial platform and targeting-directed platform are introduced in details, where the clinical translation challenges of these MSNs-based antibacterial nanoplatforms are briefly discussed afterwards. This review provides critical information of the emerging trend in turning bioinert MSNs into bioactive antibacterial agents, paving the way to inspire and translate novel MSNs-based nanotherapies in combating bacterial infection diseases.

Janus nanoparticles targeting extracellular polymeric substance achieve flexible elimination of drug-resistant biofilms

Safe and efficient antibacterial materials are urgently needed to combat drug-resistant bacteria and biofilm-associated infections. The rational design of nanoparticles for flexible elimination of biofilms remains challenging. Herein, we propose the fabrication of Janus-structured nanoparticles targeting extracellular polymeric substance to achieve dispersion or near-infrared (NIR) light-activated photothermal elimination of drug-resistant biofilms, respectively. Asymmetrical Janus-structured dextran-bismuth selenide (Dex-BSe) nanoparticles are fabricated to exploit synergistic effects of both components. Interestingly, Janus Dex-BSe nanoparticles realize enhanced dispersal of biofilms over time. Alternatively, taking advantage of the preferential accumulation of nanoparticles at infection sites, the self-propelled active motion induced by the unique Janus structure enhances photothermal killing effect. The flexible application of Janus Dex-BSe nanoparticles for biofilm removal or NIR-triggered eradication in vivo is demonstrated by Staphylococcus aureus-infected mouse excisional wound model and abscess model, respectively. The developed Janus nanoplatform holds great promise for the efficient elimination of drug-resistant biofilms in diverse antibacterial scenarios.