Elemental Sulfur Nanoparticles Enhance Disease Resistance in Tomatoes

Nano- and Microplastics Increase the Occurrence of Bacterial Wilt in Tomato (Solanum lycopersicum L.)

Concern over nano- and microplastic contamination of terrestrial ecosystems has been increasing. However, little is known about the effect of nano- and microplastics on the response of terrestrial ecosystems already under biotic stress. Here, nano- and microplastics at 150-500 mg·kg-1 were exposed to tomatoes (Solanum lycopersicum L.), and the results demonstrate that the presence of nano- and microplastics increased the occurrence of bacterial wilt caused by Ralstonia solanacearum in tomatoes as a function of contaminant concentration, surface modification, and size. Our work shows that nanoplastics (30 nm, 250 mg·kg-1) increased the disease incidence by 2.19-fold. The disease severities in amino- and carboxyl-modified nanoplastic treatments were 30.4 and 21.7% higher than that in unmodified nanoplastic treatment, respectively. The severity of disease under the influence of different-sized nano- and microplastic treatments followed the order 30 > 100 nm > 1 > 50 μm. Mechanistically, nanoplastics disrupted the structure of the tomato rhizosphere soil bacterial community and suppressed the induced systemic resistance in tomato; nanoplastics in planta decreased the salicylic acid and jasmonic acid content in tomatoes, thus inhibiting systemic acquired resistance; and microplastics increased the soil water retention, leading to increased pathogen abundance in the rhizosphere. Additionally, the leachates from nano- and microplastics had no effect on disease occurrence or the growth of tomatoes. Our findings highlight a potential risk of nano- and microplastic contamination to agriculture sustainability and food security.

Heat Waves Coupled with Nanoparticles Induce Yield and Nutritional Losses in Rice by Regulating Stomatal Closure

The frequency, duration, and intensity of heat waves (HWs) within terrestrial ecosystems are increasing, posing potential risks to agricultural production. Cerium dioxide nanoparticles (CeO2 NPs) are garnering increasing attention in the field of agriculture because of their potential to enhance photosynthesis and improve stress tolerance. In the present study, CeO2 NPs decreased the grain yield, grain protein content, and amino acid content by 16.2, 23.9, and 10.4%, respectively, under HW conditions. Individually, neither the CeO2 NPs nor HWs alone negatively affected rice production or triggered stomatal closure. However, under HW conditions, CeO2 NPs decreased the stomatal conductance and net photosynthetic rate by 67.6 and 33.5%, respectively. Moreover, stomatal closure in the presence of HWs and CeO2 NPs triggered reactive oxygen species (ROS) accumulation (increased by 32.3-57.1%), resulting in chloroplast distortion and reduced photosystem II activity (decreased by 9.4-36.4%). Metabolic, transcriptomic, and quantitative real-time polymerase chain reaction (qRT-PCR) analyses revealed that, under HW conditions, CeO2 NPs activated a stomatal closure pathway mediated by abscisic acid (ABA) and ROS by regulating gene expression (PP2C, NCED4, HPCA1, and RBOHD were upregulated, while CYP707A and ALMT9 were downregulated) and metabolite levels (the content of γ-aminobutyric acid (GABA) increased while that of gallic acid decreased). These findings elucidate the mechanism underlying the yield and nutritional losses induced by stomatal closure in the presence of CeO2 NPs and HWs and thus highlight the potential threat posed by CeO2 NPs to rice production during HWs.

Selenium Nanomaterials Enhance Sheath Blight Resistance and Nutritional Quality of Rice: Mechanisms of Action and Human Health Benefit

In the current work, the foliar application of selenium nanomaterials (Se0 NMs) suppressed sheath blight in rice (Oryza sativa). The beneficial effects were nanoscale specific and concentration dependent. Specifically, foliar amendment of 5 mg/L Se0 NMs decreased the disease severity by 68.8% in Rhizoctonia solani-infected rice; this level of control was 1.57- and 2.20-fold greater than that of the Se ions with equivalent Se mass and a commercially available pesticide (Thifluzamide). Mechanistically, (1) the controlled release ability of Se0 NMs enabled a wider safe concentration range and greater bioavailability to Se0 NMs, and (2) transcriptomic and metabolomic analyses demonstrated that Se0 NMs simultaneously promoted the salicylic acid- and jasmonic-acid-dependent acquired disease resistance pathways, antioxidative system, and flavonoid biosynthesis. Additionally, Se0 NMs improved rice yield by 31.1%, increased the nutritional quality by 6.4-7.2%, enhanced organic Se content by 44.8%, and decreased arsenic and cadmium contents by 38.7 and 42.1%, respectively, in grains as compared with infected controls. Human simulated gastrointestinal tract model results showed that the application of Se0 NMs enhanced the bioaccessibility of Se in grains by 22.0% and decreased the bioaccessibility of As and Cd in grains by 20.3 and 13.4%, respectively. These findings demonstrate that Se0 NMs can serve as an effective and sustainable strategy to increase food quality and security.

Time-Dependent and Coating Modulation of Tomato Response upon Sulfur Nanoparticle Internalization and Assimilation: An Orthogonal Mechanistic Investigation

Nanoenabled strategies have recently attracted attention as a sustainable platform for agricultural applications. Here, we present a mechanistic understanding of nanobiointeraction through an orthogonal investigation. Pristine (nS) and stearic acid surface-modified (cS) sulfur nanoparticles (NPs) as a multifunctional nanofertilizer were applied to tomato (Solanum lycopersicumL.) through soil. Both nS and cS increased root mass by 73% and 81% and increased shoot weight by 35% and 50%, respectively, compared to the untreated controls. Bulk sulfur (bS) and ionic sulfate (iS) had no such stimulatory effect. Notably, surface modification of S NPs had a positive impact, as cS yielded 38% and 51% greater shoot weight compared to nS at 100 and 200 mg/L, respectively. Moreover, nS and cS significantly improved leaf photosynthesis by promoting the linear electron flow, quantum yield of photosystem II, and relative chlorophyll content. The time-dependent gene expression related to two S bioassimilation and signaling pathways showed a specific role of NP surface physicochemical properties. Additionally, a time-dependent Global Test and machine learning strategy applied to understand the NP surface modification domain metabolomic profiling showed that cS increased the contents of IA, tryptophan, tomatidine, and scopoletin in plant leaves compared to the other treatments. These findings provide critical mechanistic insights into the use of nanoscale sulfur as a multifunctional soil amendment to enhance plant performance as part of nanoenabled agriculture.

Mechanistic insight into the intensification of arsenic toxicity to rice (Oryza sativa L.) by nanoplastic: Phytohormone and glutathione metabolism modulation

In this study, nanoplastic (NPs) at environmentally relevant concentration (0.001% w/w) had no effect on the growth of rice, while significantly elevated the phytotoxicity of As (III) by 9.4-22.8% based on the endpoints of biomass and photosynthesis. Mechanistically, NPs at 0.001% w/w enhanced As accumulation in the rice shoots and roots by 70.9% and 24.5%, respectively. Reasons of this finding can was that (1) the co-exposure with As and NPs significantly decreased abscisic acid content by 16.0% in rice, with subsequent increasing the expression of aquaporin related genes by 2.1- to 2.7-folds as compared with As alone treatment; (2) the presence of NPs significantly inhibited iron plaque formation on rice root surface by 22.5%. We firstly demonstrated that "Trojan horse effect" had no contribution to the enhancement of As accumulation by NPs exposure. Additionally, NPs disrupted the salicylic acid, jasmonic acid, and glutathione metabolism, which subsequently enhancing the oxidation (7.0%) and translocation (37.0%) of in planta As, and reducing arsenic detoxification pathways (e.g., antioxidative system (28.6-37.1%), As vacuolar sequestration (36.1%), and As efflux (18.7%)). Our findings reveal that the combined toxicity of NPs and traditional contaminations should be considered for realistic evaluations of NPs.

Salicylic acid-doped iron nano-biostimulants potentiate defense responses and suppress Fusarium wilt in watermelon

INTRODUCTION

Chemo- and bio-genic metallic nanoparticles (NPs), as a novel nano-enabled strategy, have demonstrated a great potential in crop health management.

OBJECTIVE

The current study aimed to explore the efficacy of advanced nanocomposites (NCs), integrating biogenic (bio) metallic NPs and plant immunity-regulating hormones, in crop disease control.

METHODS

Iron (Fe) NPs were biosynthesized using cell-free supernatant of a Fe-resistant strains, Bacillus marisflavi ZJ-4. Further, salicylic acid-coated bio-FeNPs (SI) NCs were prepared via co-precipitation method under alkaline conditions. Both bio-FeNPs and SINCs were characterized using basic analytical techniques, including Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction analysis, and scanning/transmission electron microscopy.

RESULTS

Bio-FeNPs and SINCs had variable shapes with average sizes of 72.35 nm and 65.87 nm, respectively. Under greenhouse conditions, bio-FeNPs and SINCs improved the agronomic traits of the watermelon plants, and SINCs outperformed bio-FeNPs, providing the maximum growth promotion of 32.5%. Soil-drenching with bio-FeNPs and SINCs suppressed Fusarium oxysporum f. sp. niveum-caused Fusarium wilt in watermelon, and SINCs provided better protection than bio-FeNPs, through inhibiting the fungal invasive growth within host plants. SINCs improved the antioxidative capacity and primed a systemic acquired resistance (SAR) response via activating the salicylic acid signaling pathway genes. These findings indicate that SINCs can reduce the severity of Fusarium wilt in watermelon by modulating antioxidative capacity and potentiating SAR to restrict in planta fungal invasive growth.

CONCLUSION

This study provides new insights into the potential of bio-FeNPs and SINCs as biostimulants and bioprotectants for growth promotion and Fusarium wilt suppression, ensuring sustainable watermelon production.

Hollow Mesoporous Silica Nanoparticles as a New Nanoscale Resistance Inducer for Fusarium Wilt Control: Size Effects and Mechanism of Action

In agriculture, soil-borne fungal pathogens, especially Fusarium oxysporum strains, are posing a serious threat to efforts to achieve global food security. In the search for safer agrochemicals, silica nanoparticles (SiO2NPs) have recently been proposed as a new tool to alleviate pathogen damage including Fusarium wilt. Hollow mesoporous silica nanoparticles (HMSNs), a unique class of SiO2NPs, have been widely accepted as desirable carriers for pesticides. However, their roles in enhancing disease resistance in plants and the specific mechanism remain unknown. In this study, three sizes of HMSNs (19, 96, and 406 nm as HMSNs-19, HMSNs-96, and HMSNs-406, respectively) were synthesized and characterized to determine their effects on seed germination, seedling growth, and Fusarium oxysporum f. sp. phaseoli (FOP) suppression. The three HMSNs exhibited no side effects on cowpea seed germination and seedling growth at concentrations ranging from 100 to 1500 mg/L. The inhibitory effects of the three HMSNs on FOP mycelial growth were very weak, showing inhibition ratios of less than 20% even at 2000 mg/L. Foliar application of HMSNs, however, was demonstrated to reduce the FOP severity in cowpea roots in a size- and concentration-dependent manner. The three HMSNs at a low concentration of 100 mg/L, as well as HMSNs-19 at a high concentration of 1000 mg/L, were observed to have little effect on alleviating the disease incidence. HMSNs-406 were most effective at a concentration of 1000 mg/L, showing an up to 40.00% decline in the disease severity with significant growth-promoting effects on cowpea plants. Moreover, foliar application of HMSNs-406 (1000 mg/L) increased the salicylic acid (SA) content in cowpea roots by 4.3-fold, as well as the expression levels of SA marker genes of PR-1 (by 1.97-fold) and PR-5 (by 9.38-fold), and its receptor gene of NPR-1 (by 1.62-fold), as compared with the FOP infected control plants. Meanwhile, another resistance-related gene of PAL was also upregulated by 8.54-fold. Three defense-responsive enzymes of POD, PAL, and PPO were also involved in the HMSNs-enhanced disease resistance in cowpea roots, with varying degrees of reduction in activity. These results provide substantial evidence that HMSNs exert their Fusarium wilt suppression in cowpea plants by activating SA-dependent SAR (systemic acquired resistance) responses rather than directly suppressing FOP growth. Overall, for the first time, our results indicate a new role of HMSNs as a potent resistance inducer to serve as a low-cost, highly efficient, safe and sustainable alternative for plant disease protection.

Effects of sulfur nanoparticles on rhizosphere microbial community changes in oilseed rape plantation soil under mercury stress

In the present study, experiments were conducted to assess the influence of nanoscale sulfur in the microbial community structure of metallophytes in Hg-contaminated rhizosphere soil for planting rapeseed. The results showed that the richness and diversity of the rhizobacteria community decreased significantly under Hg stress, but increased slightly after SNPs addition, with a reduction in the loss of Hg-sensitive microorganisms. Moreover, all changes in the relative abundances of the top ten phyla influenced by Hg treatment were reverted when subjected to Hg + SNPs treatment, except for Myxococcota and Bacteroidota. Similarly, the top five genera, whose relative abundance decreased the most under Hg alone compared to CK, increased by 19.05%-54.66% under Hg + SNPs treatment compared with Hg alone. Furthermore, the relative abundance of Sphingomonas, as one of the dominant genera for both CK and Hg + SNPs treatment, was actively correlated with plant growth. Rhizobacteria, like Pedobacter and Massilia, were significantly decreased under Hg + SNPs and were positively linked to Hg accumulation in plants. This study suggested that SNPs could create a healthier soil microecological environment by reversing the effect of Hg on the relative abundance of microorganisms, thereby assisting microorganisms to remediate heavy metal-contaminated soil and reduce the stress of heavy metals on plants.

Manganese Nanoparticles: Synthesis, Mechanisms of Influence on Plant Resistance to Stress, and Prospects for Application in Agricultural Chemistry

Manganese (Mn) is an important microelement for the mineral nutrition of plants, but it is not effectively absorbed from the soil and mineral salts added thereto and can also be toxic in high concentrations. Mn nanoparticles (NPs) are less toxic, more effective, and economical than Mn salts due to their nanosize. This article critically reviews the current publications on Mn NPs, focusing on their effects on plant health, growth, and stress tolerance, and explaining possible mechanisms of their effects. This review also provides basic information and examples of chemical, physical, and ecological ("green") methods for the synthesis of Mn NPs. It has been shown that the protective effect of Mn NPs is associated with their antioxidant activity, activation of systemic acquired resistance (SAR), and pronounced antimicrobial activity against phytopathogens. In conclusion, Mn NPs are promising agents for agriculture, but their effects on gene expression and plant microbiome require further research.

Review on interactions between nanomaterials and phytohormones: Novel perspectives and opportunities for mitigating environmental challenges

Nanotechnology offers the potential to provide innovative solutions for sustainable crop production as plants are exposed to a combination of climate change factors (CO2, temperature, UV radiation, ozone), abiotic (heavy metals, salinity, drought), and biotic (virus, bacteria, fungi, nematode, and insects) stresses. The application of particular sizes, shapes, and concentration of nanomaterials (NMs) potentially mitigate the negative impacts in plants by modulation of photosynthetic rate, redox homeostasis, hormonal balance, and nutrient assimilation through upregulation of anti-stress metabolites, antioxidant defense pathways, and genes and genes network. The present review inculcates recent advances in uptake, translocation, and accumulation mechanisms of NMs in plants. The critical theme of this review provides detailed insights into different physiological, biochemical, molecular, and stress tolerance mechanism(s) of NMs action and their cross-talk with different phytohormones. The role of NMs as a double-edged sword for climate change factors, abiotic, and biotic stresses for nutrients uptake, hormones synthesis, cytotoxic, and genotoxic effects including chromosomal aberration, and micronuclei synthesis have been extensively studied. Importantly, this review aims to provide an in-depth understanding of the hormesis effect at low and toxicity at higher doses of NMs under different stressors to develop innovative approaches and design smart NMs for sustainable crop production.

Biosynthesis of Cry5B-Loaded Sulfur Nanoparticles using Arthrobotrys oligospora Filtrate: Effects on Nematicidal Activity, Thermal Stability, and Pathogenicity against Caenorhabditis elegans

Cry5B, a crystal protein produced by Bacillus thuringiensis (Bt), is a bionematicide with potent nematicidal activity against various plant-parasitic and free-living nematodes. This protein, however, is susceptible to destruction by ultraviolet light, proteolytic enzymes, and high temperatures. This study aims to produce Cry5B protein for bionematicidal use and improve its stability and nematicidal efficacy by loading it intoArthrobotrys oligospora-mediated sulfur nanoparticles (AO-SNPs). Based on the mortality assay, the Cry5B protein exhibited dose-dependent nematicidal activity against the model organismCaenorhabditis elegans. The nematicidal activity, thermal stability, and pathogenic effects of Cry5B-loaded AO-SNPs (Cry5B-SNPs) were compared to those of free Cry5B. After 3 h of exposure to heat at 60 °C, Cry5B-SNPs had greater nematicidal activity than free Cry5B protein, indicating the effective formulation of Cry5B-SNPs that could be used as an alternative to current nematicide delivery strategies.

Nano-enabled seed treatment: A new and sustainable approach to engineering climate-resilient crops

Under a changing climate, keeping the food supply steady for an ever-increasing population will require crop plants adapted to environmental fluctuations. Genetic engineering and genome-editing approaches have been used for developing climate-resilient crops. However, genetically modified crops have yet to be widely accepted, especially for small-scale farmers in low-income countries and some societies. Nano-priming (seed exposure to nanoparticles, NPs) has appeared as an alternative to the abovementioned techniques. This technique improves seed germination speed, promotes seedlings' vigor, and enhances plant tolerance to adverse conditions such as drought, salinity, temperature, and flooding, which may occur under extreme weather conditions. Moreover, nano-enabled seed treatment can increase the disease resistance of crops by boosting immunity, which will reduce the use of pesticides. This unsophisticated, farmer-available, cost-effective, and environment-friendly seed treatment approach may help crop plants fight climate change challenges. This review discusses the previous information about nano-enabled seed treatment for enhancing plant tolerance to abiotic stresses and increasing disease resistance. Current knowledge about the mechanisms underlying nanomaterial-seed interactions is discussed. To conclude, the review includes research questions to address before this technique reaches its full potential.

Tiny but Mighty: Nanoscale Materials in Plant Disease Management

Nanoscale materials are promising tools for managing plant diseases and are becoming important players in the current agritech revolution. However, adopting modern methodologies requires a broad understanding of their effectiveness in solving target problems and their effects on the environment and food chain. Furthermore, it is paramount that such technologies are mechanistically and economically feasible for growers to adopt in order to be sustainable in the long run. This Feature Article summarizes the latest findings on the role of nanoscale materials in managing agricultural plant pathogens. Herein, we discussed the benefits and limitations of using nanoscale materials in plant disease management and their potential impacts on the environment and global food security.

Thiol ligand-mediated exfoliation of bulk sulfur to nanosheets and nanodots: applications in antibacterial activity

Reducing bulk materials to layers or dots results in profound alterations in their physiochemical and optoelectronic properties, leading to a wide array of applications, spanning from device manufacturing to biomedicine. In this regard, the preparation of sulfur nanomaterials has garnered significant attention due to their low toxicity. Traditional methods for sulfur nanomaterial synthesis often involve harsh reaction conditions, leaving a gap for convenient approaches to create nanomaterials, such as nanosheets (NSs) and nanodots (NDs). Herein, the mechanical exfoliation of bulk sulfur using a surfactant thiol ligand with probe sonication is reported, making a unique contribution to existing methods. In the reported method, the thiol group binds to sulfur surfaces, facilitating exfoliation and stabilization, while the hydrophilic ends provide functional groups for exfoliated nanomaterials. Exfoliation can yield either nanosheets or nanodots, depending on the thiol ligand and exfoliation time. This approach offers the opportunity to exfoliate bulk sulfur using bioactive thiol ligands. With this goal in mind, bulk sulfur was exfoliated with 4-mercaptophenylboronic acid (BA) to target Gram-positive bacteria. This innovative exfoliation strategy of bulk sulfur using thiol ligands holds immense promise for synthesizing functionalized sulfur nanomaterials with wide-ranging applications, particularly in biomedicine.

Nanoscale sulfur alters the bacterial and eukaryotic communities of the tomato rhizosphere and their interactions with a fungal pathogen

Nanoformulations of sulfur have demonstrated the potential to enhance plant growth and reduce disease incidence when plants are confronted with pathogens. However, the impact of nanoscale sulfur on microbial communities in close contact with the plant root, known as the rhizosphere, remain poorly characterized. In this study, we investigate the impact of three formulations of sulfur; bulk sulfur, uncoated (pristine) sulfur nanoparticles, and stearic acid coated sulfur nanoparticles, on the rhizosphere of tomato plants. Tomato plants were additionally challenged by the pathogenic fungus Fusarium oxysporum f. sp. Lycopersici. Employing bacterial 16S rRNA gene sequencing, along with recently in-house designed peptide nucleic acid clamps to facilitate the recovery of microeukaryote sequences, we performed a comprehensive survey of rhizosphere microbial populations. We found the largest influence on the composition of the rhizosphere microbiome was the presence of the fungal pathogen. However, sulfur amendments also drove state changes in the rhizosphere populations; for example, enriching the relative abundance of the plant-beneficial sulfur-oxidizing bacterium Thiobacillus. Notably, when investigating the response of the rhizosphere community to the different sulfur amendments, there was a strong interaction between the fungal pathogen and sulfur treatments. This resulted in different bacterial and eukaryotic taxa being enriched in association with the different forms of sulfur, which was dependent on the presence of the pathogen. These data point to nano formulations of sulfur exerting unique shifts in the rhizosphere community compared to bulk sulfur, particularly in association with a plant pathogen, and have implications for the sustainable use of nanoscale strategies in sustainable agriculture.

Nano-Iron Oxide (Fe3O4) Mitigates the Effects of Microplastics on a Ryegrass Soil-Microbe-Plant System

To understand microplastic-nanomaterial interactions in agricultural systems, a randomized block 90-day pot experiment was set up to cultivate ryegrass seedings in a typical red sandy soil amended with compost (1:9 ratio). Polyvinyl chloride (PVC) and polyethylene (PE) microplastic (MP) contaminants were added into pot soils at 0.1 and 10%, whereas nano-Fe3O4 (as nanoenabled agrochemicals) was added at 0.1% and 0.5% in comparison with chemical-free controls. The combination of nano-Fe3O4 and MPs significantly increased the soil pH (+3% to + 17%) but decreased the total nitrogen content (-9% to - 30%; P < 0.05). The treatment group with both nano-Fe3O4 and PE had the highest total soil C (29 g kg-1 vs 20 g kg-1 in control) and C/N ratio (13 vs 8 in control). Increased rhizosphere nano-Fe3O4 concentrations promoted ryegrass growth (+42% dry weight) by enhancing the chlorophyll (+20%) and carotenoid (+15%) activities. Plant leaf and root peroxidase enzyme activity was more significantly affected by nano-Fe3O4 with PVC (+15%) than with PE (+6%). Nano-Fe3O4 significantly changed the ryegrass bacterial community structure from belowground (the rhizoplane and root endosphere) to aboveground (the phylloplane). Under MP contamination, the addition of nano-Fe3O4 increased bacterial diversity (+0.35%) and abundance (+30%) in the phylloplane and further intensified the connectivity of ryegrass aboveground bacterial networks (positive association increased 17%). The structural equation model showed that the change in the plant microbiome was associated with the rhizosphere microbiome. Overall, these findings imply the positive influences of nano-Fe3O4 on the soil-microbe-plant system and establish a method to alleviate the harmful effects of MP accumulation in soils.

Dynamic interplay between nano-enabled agrochemicals and the plant-associated microbiome

The plant-associated microbiome is known to be a critical component for crop growth, nutrient acquisition, resistance to pathogens, and abiotic stress tolerance. Conventional approaches have been attempted to manipulate the plant-soil microbiome to improve plant performance; however, several issues have arisen, such as collateral negative impacts on microbiota composition. The lack of reliability and robustness of conventional techniques warrants efforts to develop novel alternative strategies. Nano-enabled approaches have emerged as promising platforms for enhancing agricultural sustainability and global food security. Specifically, the use of engineered nanomaterials (ENMs) as nanoscale agrochemicals has great potential to modulate the plant-associated microbiome. We review the dynamic interplay between nano-agrochemicals and the plant-associated microbiome for the safe development and use of nano-enabled microbiome engineering.

Nanoparticles as novel elicitors in plant tissue culture applications: Current status and future outlook

Plant tissue culture is the primary, fundamental, and applied aspect of plant biology. It is an indispensable and valuable technique for investigating morphogenesis, embryogenesis, clonal propagation, crop improvements, generation of pathogen-free plants, gene transfer and expression, and the production of secondary metabolites. The extensive use of various nanoparticles (NPs) in fields such as cosmetics, energy, medicine, pharmaceuticals, electronics, agriculture, and biotechnology have demonstrated positive impacts in microbial decontamination, callus differentiation, organogenesis, somatic variations, biotransformation, cryopreservation, and enhanced synthesis of bioactive compounds. This review summarizes the current state of knowledge with regard to the use of nanoparticles in plant tissue culture, with a particular focus on the beneficial outcomes. The positive (beneficial) and negative (toxic) effects of engineered NPs in tissue culture medium, delivery of transgenes, NPs toxicity concerns, safety issues, and potential hazards arising from utilization of nanomaterials in agriculture through plant tissue culture are discussed in detail, along with the future prospects for these applications. In addition, the potential use of novel nanomaterials such as graphene, graphite, dendrimers, quantum dots, and carbon nanotubes as well as unique metal or metalloid NPs are proposed. Further, the potential mechanisms underlying NPs elicitation of tissue culture response in different applications are critically evaluated. The potential of these approaches in plant nanobiotechnology is only now becoming understood and it is clear that the role of these strategies in sustainably increasing crop production to combat global food security and safety in a changing climate will be significant.

Influence of nanoscale sulfur on mercury accumulation and plant growth in oilseed rape seedlings (Brassica napus L.) grown on mercury-contaminated soil

Mercury (Hg) pollution has seriously threatened the crop productivity and food security. In the present research, experiments were conducted to assess the influence of nanoscale sulfur/sulfur nanoparticles and the corresponding bulk and ionic sulfur forms on the growth and Hg accumulation of oilseed rape seedlings grown on Hg-contaminated soil, as well as the transformation of soil Hg fractions. The results showed a significant reduction in fresh biomass for seedlings grown on 80-200 mg/kg Hg-polluted soil after 30 days. At 120 mg/kg Hg treatment, 100-300 mg/kg sulfur nanoparticles (SNPs) application counteracted Hg toxicity more effectively compared to the corresponding bulk sulfur particles (BSPs) and ionic sulfur (sulfate) treatments. The seedlings treated with 120 mg/kg Hg + 300 mg/kg SNPs gained 54.2 and 56.9% more shoot and root biomass, respectively, compared to those treated with Hg alone. Meanwhile, 300 mg/kg SNPs application decreased Hg accumulation by 18.9 and 76.5% in shoots and roots, respectively, relative to Hg alone treatment.SNPs treatment caused more Hg to be blocked in the soil and accumulating significantly less Hg in plants as compared to other S forms. The chemical fractions of Hg in the soil were subsequently investigated, and the solubility of Hg was significantly decreased by applying SNPs to the soil. Especially 200-300 mg/kg SNPs treatments caused the ratio of the soluble/exchangeable and the specifically absorbed fraction to be the lowest, accounting for 1.95-4.13% of the total Hg of soil. These findings suggest that adding SNPs to Hg-contaminated soils could be an effective measure for immobilizing soluble Hg and decreasing the Hg concentration in the edible parts of crops. The results of the current study hold promise for the practical application of SNPs to Hg-contaminated farmland for better yields and simultaneously increasing the food safety.

Lanthanum Silicate Nanomaterials Enhance Sheath Blight Resistance in Rice: Mechanisms of Action and Soil Health Evaluation

In the current study, foliar spray with lanthanum (La) based nanomaterials (La10Si6O27 nanorods, La10Si6O27 nanoparticle, La(OH)3 nanorods, and La2O3 nanoparticle) suppressed the occurrence of sheath blight (Rhizoctonia solani) in rice. The beneficial effects were morphology-, composition-, and concentration-dependent. Foliar application of La10Si6O27 nanorods (100 mg/L) yielded the greatest disease suppression, significantly decreasing the disease severity by 62.4% compared with infected controls; this level of control was 2.7-fold greater than the commercially available pesticide (Thifluzamide). The order of efficacy was as follows: La10Si6O27 nanorods > La10Si6O27 nanoparticle > La(OH)3 nanorods > La2O3 nanoparticle. Mechanistically, (1) La10Si6O27 nanorods had greater bioavailability, slower dissolution, and simultaneous Si nutrient benefits; (2) transcriptomic and metabolomic analyses revealed that La10Si6O27 nanorods simultaneously strengthened rice systemic acquired resistance, physical barrier formation, and antioxidative systems. Additionally, La10Si6O27 nanorods improved rice yield by 35.4% and promoted the nutritional quality of the seeds as compared with the Thifluzamide treatment. A two-year La10Si6O27 nanorod exposure had no effect on soil health based on the evaluated chemical, physical, and biological soil properties. These findings demonstrate that La based nanomaterials can serve as an effective and sustainable strategy to safeguard crops and highlight the importance of nanomaterial composition and morphology in terms of optimizing benefit.

Recent developments, applications and challenges for carbon quantum dots as a photosynthesis enhancer in agriculture

Since the world's population is expanding, mankind may be faced with a huge dilemma in the future, which is food scarcity. The situation can be mitigated by employing sustainable cutting-edge agricultural methods to maintain the food supply chain. In recent years, carbon quantum dots (CQD), a member of the well-known carbon-based nanomaterials family, have given rise to a new generation of technologies that have the potential to revolutionise horticulture and agriculture research. CQD has drawn much attention from the research community in agriculture owing to their remarkable properties such as good photoluminescence behaviour, high biocompatibility, photo-induced electron transfer, low cost, and low toxicity. These unique properties have led CQD to become a promising material to increase plant growth and yield in the agriculture field. This review paper highlights the recent advances of CQD application in plant growth and photosynthesis rate at different concentrations, with a focus on CQD uptake and translocation, as well as electron transfer mechanism. The toxicity and biocompatibility studies of CQD, as well as industrial scale applications of CQD for agriculture are discussed. Finally, the current challenges of the present and future perspectives in this agriculture research are presented.

Mechanistic investigation of enhanced bacterial soft rot resistance in lettuce (Lactuca sativa L.) with elemental sulfur nanomaterials

Crop diseases significantly threaten global food security and will worsen with a changing climate. Elemental sulfur nanomaterials (S NMs) were used to suppress bacterial pathogen Pectobacterium carotovorum on lettuce (Lactuca sativa L.). Foliar application with S NMs at 10-100 mg/L statistically decreased the occurrence of bacterial soft rot, where 100 mg/L exhibited the best performance with alleviating disease severity by 94.1 % as relative to infected controls. The disease suppression efficiency of S based materials (100 mg/L) and a conventional pesticide (thiophanate-methyl) followed the order of S NMs ≈ pesticide > S bulk particles (BPs) > sulfate. The disease control efficiency of S NMs was 1.33- and 3.20-fold that of S BPs and sulfate, respectively, and the shoot and root biomass with S NMs was 1.25- and 1.17-fold that of the pesticide treated plants. Mechanistically, S NMs (1) triggered jasmonic acid (JA) and salicylic acid (SA) mediated systematic induced resistance and systemic acquired resistance, thereby upregulating pathogenesis-related gene expression (enhanced by 29.3-259.7 %); (2) enhanced antioxidative enzyme activity and antioxidative gene expression (improved by 67.5-326.6 %), thereby alleviating the oxidative stress; and (3) exhibited direct in vivo antibacterial activity. Metabolomics analysis demonstrated that S NMs also promoted the tricarboxylic acid cycle and increased SA and JA metabolite biosynthesis. Moreover, S NMs application increased nutritive quality of lettuce by 20.8-191.7 %. These findings demonstrate that S NMs have potential to manage crop disease, thereby reducing the environmental burden due to decreasing use of conventional pesticides.

Aloe Vera Extract Gel-Biosynthesized Selenium Nanoparticles Enhance Disease Resistance in Lettuce by Modulating the Metabolite Profile and Bacterial Endophytes Composition

The use of nanotechnology to suppress crop diseases has attracted significant attention in agriculture. The present study investigated the antifungal mechanism by which aloe vera extract gel-biosynthesized (AVGE) selenium nanoparticles (Se NPs) suppressed Fusarium-induced wilt disease in lettuce (Lactuca sativa). AVGE Se NPs were synthesized by utilizing sodium selenite as a Se source and AVGE as a biocompatible capping and reducing agent. Over 21 d, 2.75% of total AVGE Se NPs was dissolved into Se ions, which was more than 8-fold greater than that of bare Se NPs (0.34%). Upon exposure to soil applied AVGE Se NPs at 50 mg/kg, fresh shoot biomass was significantly increased by 61.6 and 27.8% over the infected control and bare Se NPs, respectively. As compared to the infected control, the shoot levels of citrate, isocitrate, succinate, malate, and 2-oxo-glutarate were significantly upregulated by 0.5-3-fold as affected by both Se NPs. In addition, AVGE Se NPs significantly increased the shoot level of khelmarin D, a type of coumarin, by 4.40- and 0.71-fold over infected controls and bare Se NPs, respectively. Additionally, AVGE Se NPs showed greater upregulation of jasmonic acid and downregulation of abscisic acid content relative to bare Se NPs in diseased shoots. Moreover, the diversity of bacterial endophytes was significantly increased by AVGE Se NPs, with the values of Shannon index 40.2 and 9.16% greater over the infected control and bare Se NPs. Collectively, these findings highlight the significant potential of AVGE Se NPs as an effective and biocompatible strategy for nanoenabled sustainable crop protection.

Shaping Sulfur Precursors to Low Dimensional (0D, 1D and 2D) Sulfur Nanomaterials: Synthesis, Characterization, Mechanism, Functionalization, and Applications

Low-dimensional sulfur nanomaterials featuring with 0D sulfur nanoparticles (SNPs), sulfur nanodots (SNDs) and sulfur quantum dots (SQDs), 1D sulfur nanorods (SNRs), and 2D sulfur nanosheets (SNSs) have emerged as an environmentally friendly, biocompatible class of metal-free nanomaterials, sparking extensive interest in a wide range application. In this review, various synthetic methods, precise characterization, creative formation mechanism, delicate functionalization, and versatile applications of low dimensional sulfur nanomaterials over the last decades are systematically summarized. Initially, it is striven to summarize the progress of low dimensional sulfur nanomaterials from versatile precursors by using different synthetic approaches and various characterization. Then, a multi-faceted proposed formation mechanism with emphasis on how these different precursors produce corresponding SNPs, SNDs, SQDs, SNRs, and SNSs is highlighted. Besides, it is essential to fine-tune the surface functional groups of low dimensional sulfur nanomaterials to form new complex nanomaterials. Finally, these sulfur nanomaterials are being investigated in bio-sensing, bio-imaging, lithium-sulfur batteries, antibacterial activities, plant growth along with future perspective and challenges in emerging fields. The purpose of this review is to tailor low dimensional nanomaterials through accurately selecting precursors or synthetic approach and provide a foundation for the formation of versatile sulfur nanostructure.

Nanomaterial Size and Surface Modification Mediate Disease Resistance Activation in Cucumber (Cucumis sativus)

Crop disease represents a serious and increasing threat to global food security. Lanthanum oxide nanomaterials (La₂O₃ NMs) with different sizes (10 and 20 nm) and surface modifications (citrate, polyvinylpyrrolidone [PVP], and poly(ethylene glycol)) were investigated for their control of the fungal pathogen Fusarium oxysporum (Schl.) f. sp cucumerinum Owen on six-week-old cucumber (Cucumis sativus) in soil. Seed treatment and foliar application of the La₂O₃ NMs at 20-200 mg/kg (mg/L) significantly suppressed cucumber wilt (decreased by 12.50-52.11%), although the disease control efficacy was concentration-, size-, and surface modification-dependent. The best pathogen control was achieved by foliar application of 200 mg/L PVP-coated La₂O₃ NMs (10 nm); disease severity was decreased by 67.6%, and fresh shoot biomass was increased by 49.9% as compared with pathogen-infected control. Importantly, disease control efficacy was 1.97- and 3.61-fold greater than that of La₂O₃ bulk particles and a commercial fungicide (Hymexazol), respectively. Additionally, La₂O₃ NMs application enhanced cucumber yield by 350-461%, increased fruit total amino acids by 295-344%, and improved fruit vitamin content by 65-169% as compared with infected controls. Transcriptomic and metabolomic analyses revealed that La₂O₃ NMs: (1) interacted with calmodulin, subsequently activating salicylic acid-dependent systemic acquired resistance; (2) increased the activity and expression of antioxidant and related genes, thereby alleviating pathogen-induced oxidative stress; and (3) directly inhibited in vivo pathogen growth. The findings highlight the significant potential of La₂O₃ NMs for suppressing plant disease in sustainable agriculture.

Temperature-Responsive Bottlebrush Polymers Deliver a Stress-Regulating Agent In Vivo for Prolonged Plant Heat Stress Mitigation

Anticipated increases in the frequency and intensity of extreme temperatures will damage crops. Methods that efficiently deliver stress-regulating agents to crops can mitigate these effects. Here, we describe high aspect ratio polymer bottlebrushes for temperature-controlled agent delivery in plants. The foliar-applied bottlebrush polymers had near complete uptake into the leaf and resided in both the apoplastic regions of the leaf mesophyll and in cells surrounding the vasculature. Elevated temperature enhanced the in vivo release of spermidine (a stress-regulating agent) from the bottlebrushes, promoting tomato plant (Solanum lycopersicum) photosynthesis under heat and light stress. The bottlebrushes continued to provide protection against heat stress for at least 15 days after foliar application, whereas free spermidine did not. About 30% of the ∼80 nm short and ∼300 nm long bottlebrushes entered the phloem and moved to other plant organs, enabling heat-activated release of plant protection agents in phloem. These results indicate the ability of the polymer bottlebrushes to release encapsulated stress relief agents when triggered by heat to provide long-term protection to plants and the potential to manage plant phloem pathogens. Overall, this temperature-responsive delivery platform provides a new tool for protecting plants against climate-induced damage and yield loss.

Co-exposure of sulfur nanoparticles and Cu alleviate Cu stress and toxicity to oilseed rape Brassica napus L

Experiments were performed to explore the impact of sulfur nanoparticles (SNPs) on growth, Cu accumulation, and physiological and biochemical responses of oilseed rape (Brassica napus L.) inoculated with 5 mg/L Cu-amended MS medium supplemented with or without 300 mg/L SNPs exposure. Cu exerted severe phytotoxicity and inhibited plant growth. SNPs application enhanced the shoot height, root length, and dry weight of shoot and root by 34.6%, 282%, 41.7% and 37.1%, respectively, over Cu treatment alone, while the shoot and root Cu contents and Cu-induced lipid perodixation as the malondialdehyde (MDA) levels in shoots and roots were decreased by 37.6%, 35%, 28.4% and 26.8%. Further, the increases in superoxide dismutase (SOD), peroxidase (POD), catalase (CAT), ascorbate peroxidase (APX), glutathione reductase (GR) and glutathione S-transferase (GST) enzyme activities caused by Cu stress were mitigated in shoots (10.9%-37.1%) and roots (14.6%-35.3%) with SNPs addition. SNPs also positively counteracted the negative effects on shoot K, Ca, P, Mg, Mn, Zn and Fe contents and root K, Ca, Mg and Mn contents from Cu exposure alone, and significantly promoted the nutrients accumulation in plant. Additionally, in comparison with common bulk sulfur particles (BSPs) and sulfate, SNPs showed more positive effects on promoting growth in shoots (6.7% and 19.5%) and roots (10.9% and 15.1%), as well as lowering the shoot Cu content (40.1% and 43.3%) under Cu stress. Thus, SNPs application has potential to be a green and sustainable technology for increasing plant productivity and reducing accumulation of toxic metals in heavy metal polluted soils.

Nanotechnology for sustainable agro-food systems: The need and role of nanoparticles in protecting plants and improving crop productivity

The rapid population growth and environmental challenges in agriculture need innovative and sustainable solutions to meet the growing need for food worldwide. Recent nanotechnological advances found its broad applicability in agriculture's protection and post-harvesting. Engineered nanomaterials play a vital role in plant regulation, seed germination, and genetic manipulation. Their size, surface morphology, properties, and composition were designed for controlled release and enhanced properties in agriculture and the food industry. Nanoparticles can potentially be applied for the targeted and controlled delivery of fertilizers, pesticides, herbicides, plant growth regulators, etc. This help to eliminate the use of chemical-based pesticides and their water solubility, protect agrochemicals from breakdown and degradation, improve soil health, and naturally control crop pathogens, weeds, and insects, ultimately leading to enhanced crop growth and production capacity in the food industry. They can be effectively utilized for nano-encapsulation, seed germination, genetic manipulation, etc., for protecting plants and improving crop productivity, safe and improved food quality, and monitoring climate conditions. Nanoparticles played a crucial role in the uptake and translocation processes, genetically modifying the crops, high seed germination, and productivity. In this article, we have reviewed some important applications of nanoparticles for sustainable agro-food systems. The need and role of nanotechnology concerning challenges and problems faced by agriculture and the food industry are critically discussed, along with the limitations and future prospects of nanoparticles.

Bio-Functionalized Manganese Nanoparticles Suppress Fusarium Wilt in Watermelon (Citrullus lanatus L.) by Infection Disruption, Host Defense Response Potentiation, and Soil Microbial Community Modulation

The use of nanofabricated materials is being explored for the potential in crop disease management. Chemically synthesized micronutrient nanoparticles (NPs) have been shown to reduce crop diseases; however, the potential of biogenic manganese NPs (bio-MnNPs) in disease control is unknown. Here, the potential and mechanism of bio-MnNPs in suppression of watermelon Fusarium wilt, caused by Fusarium oxysporum f. sp. niveum (Fon) are reported. Bio-MnNPs are synthesized by cell-free cultural filtrate of a waterrmelon rhizosphere bacterial strain Bacillus megaterium NOM14, and are found spherical in shape with a size range of 27.0-65.7 nm. Application of bio-MnNPs at 100 µg mL^-1 increases Mn content in watermelon roots/shoots and improves growth performance through enhancing multiple physiological processes, including antioxidative capacity. Bio-MnNPs at 100 µg mL^-1 suppress Fusarium wilt through inhibiting colonization and invasive growth of Fon in watermelon roots/stems, and inhibit Fon vegetative growth, conidiation, conidial morphology, and cellular integrity. Bio-MnNPs potentiate watermelon systemic acquired resistance by triggering the salicylic acid signaling upon Fon infection, and reshape the soil microbial community by improving fungal diversity. These findings demonstrate that bio-MnNPs suppress watermelon Fusarium wilt by multiple ex planta and in planta mechanisms, and offer a promising nano-enabled strategy for the sustainable management of crop diseases.

Imaging tools for plant nanobiotechnology

The successful application of nanobiotechnology in biomedicine has greatly changed the traditional way of diagnosis and treating of disease, and is promising for revolutionizing the traditional plant nanobiotechnology. Over the past few years, nanobiotechnology has increasingly expanded into plant research area. Nanomaterials can be designed as vectors for targeted delivery and controlled release of fertilizers, pesticides, herbicides, nucleotides, proteins, etc. Interestingly, nanomaterials with unique physical and chemical properties can directly affect plant growth and development; improve plant resistance to disease and stress; design as sensors in plant biology; and even be used for plant genetic engineering. Similarly, there have been concerns about the potential biological toxicity of nanomaterials. Selecting appropriate characterization methods will help understand how nanomaterials interact with plants and promote advances in plant nanobiotechnology. However, there are relatively few reviews of tools for characterizing nanomaterials in plant nanobiotechnology. In this review, we present relevant imaging tools that have been used in plant nanobiotechnology to monitor nanomaterial migration, interaction with and internalization into plants at three-dimensional lengths. Including: 1) Migration of nanomaterial into plant organs 2) Penetration of nanomaterial into plant tissues (iii)Internalization of nanomaterials by plant cells and interactions with plant subcellular structures. We compare the advantages and disadvantages of current characterization tools and propose future optimal characterization methods for plant nanobiotechnology.

Reactive Oxygen, Nitrogen, and Sulfur Species (RONSS) as a Metabolic Cluster for Signaling and Biostimulation of Plants: An Overview

This review highlights the relationship between the metabolism of reactive oxygen species (ROS), reactive nitrogen species (RNS), and H₂S-reactive sulfur species (RSS). These three metabolic pathways, collectively termed reactive oxygen, nitrogen, and sulfur species (RONSS), constitute a conglomerate of reactions that function as an energy dissipation mechanism, in addition to allowing environmental signals to be transduced into cellular information. This information, in the form of proteins with posttranslational modifications or signaling metabolites derived from RONSS, serves as an inducer of many processes for redoxtasis and metabolic adjustment to the changing environmental conditions to which plants are subjected. Although it is thought that the role of reactive chemical species was originally energy dissipation, during evolution they seem to form a cluster of RONSS that, in addition to dissipating excess excitation potential or reducing potential, also fulfils essential signaling functions that play a vital role in the stress acclimation of plants. Signaling occurs by synthesizing many biomolecules that modify the activity of transcription factors and through modifications in thiol groups of enzymes. The result is a series of adjustments in plants' gene expression, biochemistry, and physiology. Therefore, we present an overview of the synthesis and functions of the RONSS, considering the importance and implications in agronomic management, particularly on the biostimulation of crops.

Surface Coated Sulfur Nanoparticles Suppress Fusarium Disease in Field Grown Tomato: Increased Yield and Nutrient Biofortification

Little is known about the effect of nano sulfur (NS) under field conditions as a multifunctional agricultural amendment. Pristine and surface coated NS (CS) were amended in soil at 200 mg/kg that was planted with tomato (Solanum lycopersicum) and infested with Fusarium oxysporum f. sp. lycopersici. Foliar exposure of CS (200 μg/mL) was also included. In healthy plants, CS increased tomato marketable yield up to 3.3∼3.4-fold compared to controls. In infested treatments, CS significantly reduced disease severity compared to the other treatments. Foliar and soil treatment with CS increased yield by 107 and 192% over diseased controls, respectively, and significantly increased fruit Ca, Cu, Fe, and Mg contents. A $33/acre investment in CS led to an increase in marketable yield from 4920 to 11,980 kg/acre for healthy plants and from 1135 to 2180 kg/acre for infested plants, demonstrating the significant potential of this nanoenabled strategy to increase food production.

Foliar Application of Reaction Products Derived from Selenite Removal by Iron Monosulfide for Brassica rapa ssp. Chinensis L

The extensive application of FeS in environmental remediation requires the recovery and reuse of reaction products between FeS and pollutants. Therefore, foliar application of reaction products derived from selenite [Se(IV)] removal by FeS for pak choi was performed. The removal rate of Se(IV) by 100 mg/L FeS was 0.047 h^-1. 93.2% of Se(IV) was reduced to Se(0), and FeS was correspondingly oxidized to goethite (78.9%), lepidocrocite (21.1%), and S(0) (91.5%) based on the analysis of X-ray absorption fine structure. The reaction products promoted the growth of pak choi in terms of fresh biomass, vitamin C, and protein, ascribed to the key roles of Fe and S in enhancing the electron transfer rate and light conversion rate. Furthermore, the application of reaction products decreased by 64% of disease incidence as compared with the pathogen Pseudomonas syringae pv. maculicola-infected control. The total Se content in plants increased to 576 μg/kg and was composed of 11.9% of SeMeCys, 29.8% of SeMet, and 58.3% of SeCys after exposure to reaction products, which is beneficial to the human dietary intake from pak choi. This study demonstrated that the reaction products between FeS and Se(IV) could be recovered and applied as a nano-enabled strategy to prevent crop insecurity.

Simultaneous exposure of wheat (Triticum aestivum L.) to CuO and S nanoparticles alleviates toxicity by reducing Cu accumulation and modulating antioxidant response

Widespread use of metal-based nanoparticles (NPs) may result in the increased accumulation of metals in agricultural soil, which could affect crop productivity and contaminate the food-chain. The effect of sulfur nanoparticles (S NPs, 200 mg/L) co-exposure on the toxicity of CuO nanoparticles (CuO NPs, 25 and 50 mg/L) to wheat seedlings was investigated in a hydroponic system. CuO NPs exposure significantly inhibited the growth of wheat seedlings, causing 43.6% and 54.1% decreases in the fresh biomass of plants and 82.8% and 83.1% decrease in the total chlorophyll contents at 25 and 50 mg/L (CuONP25 and CuONP50), respectively, as compared to controls. CuO NPs exposure at both concentrations increased the malondialdehyde (MDA) content in shoot and root tissues by 66.4-67.9% and 47.7-48.8%, respectively. Further, CuO NPs exposure elevated the activities POD, SOD, and CAT by 2.19-2.27, 5.82-6.09, and 1.44-1.95 times in roots, and by 45.2-67.8%, 86.7-154.5%, and 22.5-56.1% in shoot, respectively, in comparison to control. The addition of S NPs alone increased wheat biomass by 11.0% and total chlorophyll contents by 4.4%, compared to controls. Further, simultaneous exposure to S NPs (200 mg/L) and CuO NPs (25 or 50 mg/L) alleviated the CuO NPs toxicity; wheat biomass was 47.8% and 37.7% higher in CuONP25 + SNP and CuONP50 + SNP treatments, respectively, as compared to CuO NPs alone treated plants. Co-exposed plants showed reduced levels of total reactive oxygen species (ROS), O₂^·- and H₂O₂. Additionally, S NPs exposure reduced Cu uptake and accumulation in both root and shoot tissue by 32.2-54.4% and 38.3-57.5%, respectively. In summary, S NPs alleviated CuO NPs toxicity to wheat seedlings, most likely by reducing Cu bioavailability and accumulation of Cu in plant tissues, and also altered S nutrition and the modulation of antioxidant response in plants. These results showed that S NPs application has the potential to alleviate CuO NP toxicity and increase wheat productivity affected by metals toxicity.

Therapeutic Delivery of Nanoscale Sulfur to Suppress Disease in Tomatoes: In Vitro Imaging and Orthogonal Mechanistic Investigation

Nanoscale sulfur can be a multifunctional agricultural amendment to enhance crop nutrition and suppress disease. Pristine (nS) and stearic acid coated (cS) sulfur nanoparticles were added to soil planted with tomatoes (Solanum lycopersicum) at 200 mg/L soil and infested with Fusarium oxysporum. Bulk sulfur, ionic sulfate, and healthy controls were included. Orthogonal end points were measured in two greenhouse experiments, including agronomic and photosynthetic parameters, disease severity/suppression, mechanistic biochemical and molecular end points including the time-dependent expression of 13 genes related to two S bioassimilation and pathogenesis-response, and metabolomic profiles. Disease reduced the plant biomass by up to 87%, but nS and cS amendment significantly reduced disease as determined by area-under-the-disease-progress curve by 54 and 56%, respectively. An increase in planta S accumulation was evident, with size-specific translocation ratios suggesting different uptake mechanisms. In vivo two-photon microscopy and time-dependent gene expression revealed a nanoscale-specific elemental S bioassimilation pathway within the plant that is separate from traditional sulfate accumulation. These findings correlate well with time-dependent metabolomic profiling, which exhibited increased disease resistance and plant immunity related metabolites only with nanoscale treatment. The linked gene expression and metabolomics data demonstrate a time-sensitive physiological window where nanoscale stimulation of plant immunity will be effective. These findings provide mechanistic understandings of nonmetal nanomaterial-based suppression of plant disease and significantly advance sustainable nanoenabled agricultural strategies to increase food production.

Potential of metal and metal oxide nanoparticles in plant disease diagnostics and management: Recent advances and challenges

Plant diseases caused by phytopathogens are a severe threat to global food production. Management of plant diseases mostly rely on the application of pesticides which have several adverse effects on the ecosystem. Innovative and high-performance diagnostic tools are useful for the early detection of phytopathogens. Emerging role of metal and metal oxides nanoparticles (NPs) in plant disease diagnostics to combat crop diseases has been described. These NPs constitute new weapons against plant pathogens and facilitate the early diagnosis/management of crop diseases specifically in resource-poor conditions. The interactions between NPs, phytopathogens and plants showed great diversity and multiplicity which reduces chances of the development of resistant pathogen strains. The present article discusses the available literature as well as challenges and research gaps that are essential in the successful utilization of metal and metal oxide NPs for precise and timely detection and management of plant diseases.

Silica nanoparticles protect rice against biotic and abiotic stresses

BACKGROUND

By 2050, the world population will increase to 10 billion which urged global demand for food production to double. Plant disease and land drought will make the situation more dire, and safer and environment-friendly materials are thus considered as a new countermeasure. The rice blast fungus, Magnaporthe oryzae, causes one of the most destructive diseases of cultivated rice worldwide that seriously threatens rice production. Unfortunately, traditional breeding nor chemical approaches along control it well. Nowadays, nanotechnology stands as a new weapon against these mounting challenges and silica nanoparticles (SiO₂ NPs) have been considered as potential new safer agrochemicals recently but the systematically studies remain limited, especially in rice.

RESULTS

Salicylic acid (SA) is a key plant hormone essential for establishing plant resistance to several pathogens and its further affected a special form of induced resistance, the systemic acquired resistance (SAR), which considered as an important aspect of plant innate immunity from the locally induced disease resistance to the whole plant. Here we showed that SiO₂ NPs could stimulate plant immunity to protect rice against M. oryzae through foliar treatment that significantly decreased disease severity by nearly 70% within an appropriate concentration range. Excessive concentration of foliar treatment led to disordered intake and abnormal SA responsive genes expressions which weaken the plant resistance and even aggravated the disease. Importantly, this SA-dependent fungal resistance could achieve better results with root treatment through a SAR manner with no phytotoxicity since the orderly and moderate absorption. What's more, root treatment with SiO₂ NPs could also promote root development which was better to deal with drought.

CONCLUSIONS

Taken together, our findings not only revealed SiO₂ NPs as a potential effective and safe strategy to protect rice against biotic and abiotic stresses, but also identify root treatment for the appropriate application method since it seems not causing negative effects and even have promotion on root development.

Star Polymers with Designed Reactive Oxygen Species Scavenging and Agent Delivery Functionality Promote Plant Stress Tolerance

Plant abiotic stress induces reactive oxygen species (ROS) accumulation in leaves that can decrease photosynthetic performance and crop yield. Materials that scavenge ROS and simultaneously provide nutrients in vivo are needed to manage this stress. Here, we incorporated both ROS scavenging and ROS triggered agent release functionality into an ∼20 nm ROS responsive star polymer (RSP) poly(acrylic acid)-block-poly((2-(methylsulfinyl)ethyl acrylate)-co-(2-(methylthio)ethyl acrylate)) (PAA-b-P(MSEA-co-MTEA)) that alleviated plant stress by simultaneous ROS scavenging and nutrient agent release. Hyperspectral imaging indicates that all of the RSP penetrates through the tomato leaf epidermis, and 32.7% of the applied RSP associates with chloroplasts in mesophyll. RSP scavenged up to 10 μmol mg^-1 ROS in vitro and suppressed ROS in vivo in stressed tomato (Solanum lycopersicum) leaves. Reaction of the RSP with H₂O₂in vitro enhanced the release of nutrient agent (Mg²⁺) from star polymers. Foliar applied RSP increased photosynthesis in plants under heat and light stress compared to untreated controls, enhancing the carbon assimilation, quantum yield of CO₂ assimilation, Rubisco carboxylation rate, and photosystem II quantum yield. Mg loaded RSP improved photosynthesis in Mg deficient plants, mainly by promoting Rubisco activity. These results indicate the potential of ROS scavenging nanocarriers like RSP to alleviate abiotic stress in crop plants, allowing crop plants to be more resilient to heat stress, and potentially other climate change induced abiotic stressors.

Foliar Application with Iron Oxide Nanomaterials Stimulate Nitrogen Fixation, Yield, and Nutritional Quality of Soybean

Sustainable strategies for the management of iron deficiency in agriculture are warranted because of the low use efficiency of commercial iron fertilizer, which confounds global food security and induces negative environmental consequences. The impact of foliar application of differently sized γ-Fe2O3 nanomaterials (NMs, 4-15, 8-30, and 40-215 nm) on the growth and physiology of soybean seedlings was investigated at different concentrations (10-100 mg/L). Importantly, the beneficial effects on soybean were size- and concentration-dependent. Foliar application with the smallest size γ-Fe2O3 NMs (S-Fe2O3 NMs, 4-15 nm, 30 mg/L) yielded the greatest growth promotion, significantly increasing the shoot and nodule biomass by 55.4 and 99.0%, respectively, which is 2.0- and 2.6-fold greater than the commercially available iron fertilizer (EDTA-Fe) with equivalent molar Fe. In addition, S-Fe2O3 NMs significantly enhanced soybean nitrogen fixation by 13.2% beyond that of EDTA-Fe. Mechanistically, transcriptomic and metabolomic analyses revealed that (1) S-Fe2O3 NMs increased carbon assimilation in nodules to supply more energy for nitrogen fixation; (2) S-Fe2O3 NMs activated the antioxidative system in nodules, with subsequent elimination of excess reactive oxygen species; (3) S-Fe2O3 NMs up-regulated the synthesis of cytokinin and down-regulated ethylene and jasmonic acid content in nodules, promoting nodule development and delaying nodule senescence. S-Fe2O3 NMs also improved 13.7% of the soybean yield and promoted the nutritional quality (e.g., free amino acid content) of the seeds as compared with EDTA-Fe with an equivalent Fe dose. Our findings demonstrate the significant potential of γ-Fe2O3 NMs as a high-efficiency and sustainable crop fertilizer strategy.

Fulvic–polyphosphate composite embedded in ZnO nanorods (FA–APP@ZnO) for efficient P/Zn nutrition for peas (Pisum sativum L.)

A nano-fertilizer (FA–APP@ZnO) was designed and prepared based on the copolymer of fulvic acid (FA) and ammonium polyphosphate (APP) with ZnO nanorods embedded, to tackle the antagonism between phosphorus (P) and zinc (Zn) in fertilization. FA–APP@ZnO was confirmed to revert the precipitability of H₂PO₄⁻ and Zn²⁺ into a synergistic performance, where FA and APP can disperse ZnO nanorods, and in return, ZnO catalyzes the hydrolysis of the absorbed APP. The hydrolysis rate constant of pyrophosphates consequently increased 8 times. The dry biomass of pea (Pisum sativum L.) under the FA–APP@ZnO hydroponics for 7 days increased by 119%, as compared with the situation employing the conventional NH₄H₂PO₄ and ZnSO₄ compound fertilizer. Moreover, the uptake of seedlings for P and Zn was enhanced by 54% and 400%, respectively. The accelerated orthophosphate release due to ZnO catalysis and the well-dispersed ZnO nanorods enabled by APP met the urgent demand for P and Zn nutrients for peas, especially at their vigorous seedling stage. This work would provide a new idea for constructing nano-platforms to coordinate the incompatible P and Zn nutrients for the improvement of agronomic efficiency.

Phyto-nanotechnology can improve the nutrient efficiency and alleviate the environmental stress caused by eluvial agricultural chemicals, contributing to sustainable agriculture.

Effect of the Nanoparticle Exposures on the Tomato Bacterial Wilt Disease Control by Modulating the Rhizosphere Bacterial Community

Ralstonia Solanacearum is one of the most infectious soil-borne bacterial plant pathogens, causing tomato bacterial wilt (TBW). Nanotechnology is an emerging area of research, particularly the application of nanoparticles (NPs) as nanopesticides to manage plant disease is gaining attention nowadays. However, the interaction between NPs and rhizosphere bacterial communities remains largely elusive. This study indicated that metal NPs (CuO, ZnO, and FeO) reduced the incidence of bacterial wilt to varying degrees and affected the composition and structure of the rhizosphere bacterial community. The results revealed that the application of metal oxide NPs can improve the morphological and physiological parameters of TBW infected tomato plants. Among all, CuONPs amendments significantly increase the Chao1 and Shannon index. In the early stage (the second week), it significantly reduces the relative abundance of pathogens. However, the relative abundance of beneficial Streptomyces bacteria increased significantly, negatively correlated with the relative abundance of pathogenic bacteria. In addition, the nano-treatment group will enrich some potential beneficial bacteria such as species from Sphingomonadaceae, Rhizobiaceae, etc. In general, our research provides evidence and strategies for preventing and controlling soil-borne disease tomato bacterial wilt with metal oxide NPs.

Nanoscale Sulfur Improves Plant Growth and Reduces Arsenic Toxicity and Accumulation in Rice (Oryza sativa L.)

Rice is known to accumulate arsenic (As) in its grains, posing serious health concerns for billions of people globally. We studied the effect of nanoscale sulfur (NS) on rice seedlings and mature plants under As stress. NS application caused a 40% increase in seedling biomass and a 26% increase in seed yield of mature plants compared to untreated control plants. AsIII exposure caused severe toxicity to rice; however, coexposure of plants to AsIII and NS alleviated As toxicity, and growth was significantly improved. Rice seedlings treated with AsIII + NS produced 159 and 248% more shoot and root biomass, respectively, compared to plants exposed to AsIII alone. Further, AsIII + NS-treated seedlings accumulated 32 and 11% less As in root and shoot tissues, respectively, than the AsIII-alone treatment. Mature plants treated with AsIII + NS produced 76, 110, and 108% more dry shoot biomass, seed number, and seed yield, respectively, and accumulated 69, 38, 18, and 54% less total As in the root, shoot, flag leaves, and grains, respectively, compared to AsIII-alone-treated plants. A similar trend was observed in seedlings treated with AsV and NS. The ability of sulfur (S) to alleviate As toxicity and accumulation is clearly size dependent as NS could effectively reduce bioavailability and accumulation of As in rice via modulating the gene expression activity of As transport, S assimilatory, and glutathione synthesis pathways to facilitate AsIII detoxification. These results have significant environmental implications as NS application in agriculture has the potential to decrease As in the food chain and simultaneously enable crops to grow and produce higher yields on marginal and contaminated lands.