pH- and Temperature-Sensitive Hydrogel Nanoparticles with Dual Photoluminescence for Bioprobes

Tominaga T, Moretti Bonadio TG, P. da Silveira N, C. Leite D. A Study on the Behavior of Smart Starch-co-poly(N-isopropylacrylamide) Hybrid Microgels for Encapsulation of Methylene Blue

Hybrid microgels made from starch nanoparticles (SNPs) and poly(N-isopropylacrylamide) p(NIPAM) were used as promising hosts for the methylene blue (MB) dye. In this paper, these thermoresponsive microgels were characterized by dynamic light scattering (DLS), zeta potential measurements (ZP), and scanning electron microscopy (SEM) and evaluated as carriers for skin-targeted drug delivery. The hybrid microgel-MB systems in PBS solution were also studied by UV-vis spectroscopy and DLS, revealing discernible differences in spectral intensity and absorption shifts compared to microgels devoid of MB. This underscores the successful integration of methylene blue within the SNPs-co-p(NIPAM) microgels, signifying their potential as efficacious drug delivery vehicles.

Hybrid Water-Harvesting Channels Delivering Wide-Range and Supersensitive Passive Fluorescence Humidity Sensors

The development of optical humidity detection has been of considerable interest in highly integrated wearable electronics and packaged equipment. However, improving their capacities for color recognition at ultralow humidity and response-recovery rate remains a significant challenge. Herein, we propose a type of hybrid water-harvesting channel to construct brand-new passive fluorescence humidity sensors (PFHSs). Specifically, the hybrid water-harvesting channels involve porous metal-organic frameworks and a hydrophilic poly(acrylic acid) network that can capture water vapors from the ambient environment even at ultralow humidity, into which polar-responsive aggregation-induced emission molecules are doped to impart humidity-sensitive luminescence colors. As a result, the PFHSs exhibit clearly defined fluorescence signals within 0-98% RH coupling with desirable performances such as a fast response rate, precise quantitative feedback, and durable reversibility. Given the flexible processability of this system, we further upgrade the porous structure via electrostatic spinning to furnish a kind of Nano-PFHSs, demonstrating an impressive response time (<100 ms). Finally, we validate the promising applications of these sensors in electronic humidity monitoring and successfully fabricate a portable and rapid humidity indicator card.

Intrinsic dual emissive insulin capped Au/Ag nanoclusters as single ratiometric nanoprobe for reversible detection of pH and temperature and cell imaging

pH and temperature are two important characteristics in cells and the environment. These, not only in the well-done regulation of cell functions but also in diagnosis and treatment, have a key role. Protein-protected bimetallic nanoclusters are abundantly used in the building of biosensors. However, insulin-stabilized Au-Ag nanoclusters with dual intrinsic emission have not been investigated yet. In this work, Dual emissive insulin templated Au-Ag nanocluster (Ins(Au/Ag)NCs) were first synthesized in a simple and green one-put manner. The two emission wavelengths of, as-prepared NCs centered at 410 and 630 nm, excited in one excitation wavelength (330 nm). These two emission peaks were assigned to the di-Tyrosine cross-linked formation and bimetallic nanoclusters respectively. Further analysis displayed that each emission band of Ins(Au/Ag)NCs responded to one variable whilst another peak remained constant; For blue and red emission wavelengths, pH dependency and thermo-responsibility were observed respectively. As-prepared nanoprobe with the intrinsic dual emissive feature was used for ratiometric determination of these parameters, each with a discrete response from another. The linear range of 6.0-9.0 for pH and 1 to 71 °C for temperature was obtained, which comprises the physiological range of pH and temperature and afforded intracellular sensing and imaging capability. As-prepared NCs probe show excellent biocompatibility and cell membrane permeability, and so were successfully applied as direct ratiometric pH and temperature probes in HeLa and HFF cells. More interestingly, this dual emissive nanoprobe is capable of distinguishing cancer cells from normal ones.

Revolutionizing Wound Healing: Exploring Scarless Solutions through Drug Delivery Innovations

Human skin is the largest organ and outermost surface of the human body, and due to the continuous exposure to various challenges, it is prone to develop injuries, customarily known as wounds. Although various tissue engineering strategies and bioactive wound matrices have been employed to speed up wound healing, scarring remains a significant challenge. The wound environment is harsh due to the presence of degradative enzymes and elevated pH levels, and the physiological processes involved in tissue regeneration operate on distinct time scales. Therefore, there is a need for effective drug delivery systems (DDSs) to address these issues. The objective of this review is to provide a comprehensive exposition of the mechanisms underlying the skin healing process, the factors and materials used in engineering DDSs, and the different DDSs used in wound care. Furthermore, this investigation will delve into the examination of emergent technologies and potential avenues for enhancing the efficacy of wound care devices.

Effect of temperature on the conformation and functionality of poly(N-isopropylacrylamide) (PNIPAM)-grafted nanocellulose hydrogels

HYPOTHESIS

Poly(N-isopropylacrylamide) [PNIPAM]-grafted cellulose nanofibers (CNFs) are new thermo-responsive hydrogels which can be used for a wide range of applications. Currently, there is no clear understanding of the precise mechanism by which CNFs and PNIPAM interact together. Here, we hypothesize that the physical crosslinking of grafted PNIPAM on CNF inhibits the free movement of individual CNF, which increases the gel strength while sustaining its thermo-responsive properties.

EXPERIMENTS

The thermo-responsive behaviour of PNIPAM-grafted CNFs (PNIPAM-g-CNFs), synthesized via silver-catalyzed decarboxylative radical polymerization, and PNIPAM-blended CNFs (PNIPAM-b-CNFs) was studied. Small angle neutron scattering (SANS) combined with Ultra-SANS (USANS) revealed the nano to microscale conformation changes of these polymer hybrids as a function of temperature. The effect of temperature on the optical and viscoelastic properties of hydrogels was also investigated.

FINDINGS

Grafting PNIPAM from CNFs shifted the lower critical solution temperature (LCST) from 32 °C to 36 °C. Below LCST, the PNIPAM chains in PNIPAM-g-CNF sustain an open conformation and poor interaction with CNF, and exhibit water-like behaviour. At and above LCST, the PNIPAM chains change conformation to entangle and aggregate nearby CNFs. Large voids are formed in solution between the aggregated PNIPAM-CNF walls. In comparison, PNIPAM-b-CNF sustains liquid-like behaviour below LCST. At and above LCST, the blended PNIPAM phase separates from CNF to form large aggregates which do not affect CNF network and thus PNIPAM-b-CNF demonstrates low viscosity. Understanding of temperature-dependent conformation of PNIPAM-g-CNFs engineer thermo-responsive hydrogels for biomedical and functional applications.

Stimuli-sensitive nano-drug delivery with programmable size changes to enhance accumulation of therapeutic agents in tumors

Nano-based drug delivery systems hold significant promise for cancer therapies. Presently, the poor accumulation of drug-carrying nanoparticles in tumors has limited their success. In this study, based on a combination of the paradigms of intravascular and extravascular drug release, an efficient nanosized drug delivery system with programmable size changes is introduced. Drug-loaded smaller nanoparticles (secondary nanoparticles), which are loaded inside larger nanoparticles (primary nanoparticles), are released within the microvascular network due to temperature field resulting from focused ultrasound. This leads to the scale of the drug delivery system decreasing by 7.5 to 150 times. Subsequently, smaller nanoparticles enter the tissue at high transvascular rates and achieve higher accumulation, leading to higher penetration depths. In response to the acidic pH of tumor microenvironment (according to the distribution of oxygen), they begin to release the drug doxorubicin at very slow rates (i.e., sustained release). To predict the performance and distribution of therapeutic agents, a semi-realistic microvascular network is first generated based on a sprouting angiogenesis model and the transport of therapeutic agents is then investigated based on a developed multi-compartment model. The results show that reducing the size of the primary and secondary nanoparticles can lead to higher cell death rate. In addition, tumor growth can be inhibited for a longer time by enhancing the bioavailability of the drug in the extracellular space. The proposed drug delivery system can be very promising in clinical applications. Furthermore, the proposed mathematical model is applicable to broader applications to predict the performance of drug delivery systems.

A multifunctional polyacrylamide/chitosan hydrogel for dyes adsorption and metal ions detection in water

Removing noxious dyes and detecting excessive metal ions in water are both effective means to prevent damage from contaminants and ensure water safety. The emphasis problems were addressed by preparation a polyacrylamide chitosan (PAAM/CS) hydrogel. Polyacrylamide (PAAM) provides overall mechanical strength to carry loads and facilitate circulation, chitosan (CS) provides adsorption positions with high adsorption capacity. Which made that PAMM/CS hydrogel efficiently performed sorption of xylenol orange (XO). As the functional dye, XO binds to PAAM/CS and confers colorimetric properties on PAAM/CS hydrogels. XO sorbed hydrogel realized fluorescence dual-signal detection of Fe3+ and Al3+ in water. The significant swelling and adsorption potency of the hydrogel, combined with the dual-signal detection capability of XO sorbed hydrogel, make this hydrogel a versatile material for environmental applications.

Synthesis and Characterization of Thermoresponsive Chitosan-graft-poly(N-isopropylacrylamide) Copolymers

Thermoresponsive chitosan-graft-poly(N-isopropylacrylamide) (CS-g-PNIPAAm) copolymers of different composition were synthesized by free-radical polymerization of chitosan (CS) and N-isopropylacrylamide (NIPAAm) in aqueous solution using potassium persulfate (PPS) as an initiator. By changing the molar ratio of CS:NIPAAm from 1:0.25 to 1:10 graft copolymers with a CS backbone and different amounts of PNIPAM side chains were prepared. The chemical structure of the obtained CS-g-PNIPAAm copolymers was confirmed by FTIR and 1H NMR spectroscopy. 1H NMR spectra were also used to calculate the content of attached PNIPAAm side chains. Moreover, the lower critical solution temperature (LCST) behavior of synthesized copolymers was assessed by cloud point, differential scanning calorimetry and particle size measurements. The aqueous solutions of copolymers containing ≥12 molar percent of PNIPAAm side chains demonstrated LCST behavior with the phase separation at around 29.0-32.7 °C. The intensity of thermoresponsiveness depended on the composition of copolymers and increased with increasing content of poly(N-isopropylacrylamide) moieties. The synthesized thermoresponsive chitosan-graft-poly(N-isopropylacrylamide) copolymers could be potentially applied in drug delivery systems or tissue engineering.

Synthesis, Thermogravimetric Analysis, and Kinetic Study of Poly-N-Isopropylacrylamide with Varied Initiator Content

The thermal decomposition and kinetic parameters of four polymers, PN-1, PN-05, PN-01, and PN-005, were determined by thermogravimetry (TGA/DTG) under non-isothermal conditions. N-isopropylacrylamide (NIPA)-based polymers were synthesized by the surfactant-free precipitation polymerization (SFPP) with different concentrations of the anionic initiator potassium persulphate (KPS). Thermogravimetric experiments were carried out in the temperature range of 25-700 °C at four heating rates, 5, 10, 15, and 20 °C min^-1, under a nitrogen atmosphere. Poly NIPA (PNIPA) showed three stages of mass loss during the degradation process. The thermal stability of the test material was determined. Activation energy values were estimated using Ozawa, Kissinger, Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Friedman (FD) methods.

Dispersion Performances of Naphthalimides Doped in Dual Temperature- and pH-Sensitive Poly (N-Isopropylacrylamide-co-acrylic Acid) Shell Assembled with Vinyl-Modified Mesoporous SiO2 Core for Fluorescence Cell Imaging

Developing effective intelligent nanocarriers is highly desirable for fluorescence imaging and therapeutic applications but remains challenging. Using a vinyl-grafted BMMs (bimodal mesoporous SiO₂ materials) as a core and PAN ((2-aminoethyl)-6-(dimethylamino)-1H-benzo[de]isoquinoline-1,3(2H)-dione))-dispersed dual pH/thermal-sensitive poly(N-isopropylacrylamide-co-acrylic acid) as a shell, PAN@BMMs with strong fluorescence and good dispersibility were prepared. Their mesoporous features and physicochemical properties were extensively characterized via XRD patterns, N₂ adsorption-desorption analysis, SEM/TEM images, TGA profiles, and FT-IR spectra. In particular, their mass fractal dimension (d_m) features based on SAXS patterns combined with fluorescence spectra were successfully obtained to evaluate the uniformity of the fluorescence dispersions, showing that the d_m values increased from 2.49 to 2.70 with an increase of the AN-additive amount from 0.05 to 1%, along with the red shifting of their fluorescent emission wavelength from 471 to 488 nm. The composite (PAN@BMMs-I-0.1) presented a densification trend and a slight decrease in peak (490 nm) intensity during the shrinking process. Its fluorescent decay profiles confirmed two fluorescence lifetimes of 3.59 and 10.62 ns. The low cytotoxicity obtained via in vitro cell survival assay and the efficient green imaging performed via HeLa cell internalization suggested that the smart PAN@BMM composites are potential carriers for in vivo imaging and therapy.

Water-Soluble Cationic Eu3+-Metallopolymer with High Quantum Yield and Sensitivity for Intracellular Temperature Sensing

Lanthanide-based (Ln³⁺) luminescent materials are ideal candidates for use in fluorescence intracellular temperature sensing. However, it remains a great challenge to obtain a Ln³⁺-ratiometric fluorescence thermometer with high sensitivity and quantum yield in an aqueous environment. Herein, a cationic Eu³⁺-metallopolymer was synthesized via the coordination of Eu(TTA)₃·2H₂O with an AIE active amphipathic polymer backbone that contains APTMA ((3-acrylamidopropyl) trimethylammonium) and NIPAM (N-isopropylacrylamide) units, which can self-assemble into nanoparticles in water solution with APTMA and NIPAM as the hydrophilic shell. This polymer exhibited highly efficient dual-emissive white-light emission (Φ = 34.3%). Particularly, when the temperature rises, the NIPAM units will transform from hydrophilic to hydrophobic in the spherical core of the nanoparticle, while the VTPE units are moved from inside the nanoparticle to the shell, activating its nonradiative transition channel and thereby decreasing its energy transfer to Eu³⁺ centers, endowing the Eu³⁺-metallopolymer with an extremely high temperature sensing sensitivity within the physiological temperature range. Finally, the real-time monitoring of the intracellular temperature variation is further conducted.

Solvent stimuli-responsive off-on fluorescence induced by synergistic effect of doping and phase transformation for Te4+ doped indium halide perovskite: Giving printable and colorless ink for information encryption and decryption

Since traditional fluorescent materials are too easily observed by the eyes just under the UV light, off-on fluorescent materials are explored as the new generation of fluorescent labels. In the "off" state, such off-on fluorescent labels cannot be observed by naked eyes under either natural light or UV light. Only after a specific decryption treatment to make the fluorescent materials turning into the "on" state, the fluorescent labels can be observed under the UV light. Up to now, it is still a challenge to prepare fluorescent inks with aforementioned ideal properties by using halide perovskite materials. Herein, we reported the first example of Te⁴⁺ doped indium halide perovskite inks with both off-on fluorescence under solvent stimuli and invisible ink color by the naked eyes. The synergistic effect of doping/undoping of Te⁴⁺ together with the reversible phase transformation between Cs₂InCl₅(H₂O) and Cs₃InCl₆ under solvent stimuli is key for the off-on fluorescence of crystals. Under acid solvent, the substitutional doping of Te⁴⁺ during the process of phase transformation from Cs₃InCl₆ to Cs₂InCl₅(H₂O):Te⁴⁺ gives rise to "turning-on" orange emission from Te-induced self-trap emission (STE). Under the stimuli of methanol, the dissolution of Te⁴⁺ from the crystals destroys the structure of Te⁴⁺ in ligand-field and results in "turning-off" Te-induced emission during the process of phase transformation from Cs₂InCl₅(H₂O):Te⁴⁺ to Cs₃InCl₆. On the basis of the Te⁴⁺ doped indium halide perovskite, printable and colorless ink can be prepared for the confidential information encryption and decryption. Since the mixture of Cs₃InCl₆ crystals and TeCl₄ have no absorption in visible light scope, the printed encrypted information by such off-state fluorescent ink is colorless and invisible by the naked eyes under either ambient light or UV light. After decryption by acid solvent stimuli, the resulted Cs₂InCl₅(H₂O):Te⁴⁺ doping crystals have a large Stokes shift with absorption below 450 nm from the excitation of Te⁴⁺ in ligand-field and emission around 570 nm from Te-induced STE. It makes the decryption information still colorless and invisible by the naked eyes under the ambient light but visible and readable under the UV light. In comparison to traditional undoped CsPbBr₃/CsPb₂Br₅ perovskites with small Stokes shift and eye-visible ink color, the current colorless Te⁴⁺doped indium halide perovskites are no doubt providing better security level for both encrypted and decrypted information.

Nanocomposite Hydrogels as Functional Extracellular Matrices

Over recent years, nano-engineered materials have become an important component of artificial extracellular matrices. On one hand, these materials enable static enhancement of the bulk properties of cell scaffolds, for instance, they can alter mechanical properties or electrical conductivity, in order to better mimic the in vivo cell environment. Yet, many nanomaterials also exhibit dynamic, remotely tunable optical, electrical, magnetic, or acoustic properties, and therefore, can be used to non-invasively deliver localized, dynamic stimuli to cells cultured in artificial ECMs in three dimensions. Vice versa, the same, functional nanomaterials, can also report changing environmental conditions-whether or not, as a result of a dynamically applied stimulus-and as such provide means for wireless, long-term monitoring of the cell status inside the culture. In this review article, we present an overview of the technological advances regarding the incorporation of functional nanomaterials in artificial extracellular matrices, highlighting both passive and dynamically tunable nano-engineered components.

Chemical, physical, and biological stimuli-responsive nanogels for biomedical applications (mechanisms, concepts, and advancements): A review

The development of nanotechnology has influenced the advancements in biomedical and pharmaceutical fields. The design and formulation of stimuli-responsive nano-drug delivery systems, also called smart drug delivery systems, have attracted significant research worldwide and have been seen as a breakthrough in nanomedicines. The ability of these nanocarriers to respond to external and internal stimuli, such as pH, temperature, redox, electric and magnetic fields, enzymes, etc., has allowed them to deliver the cargo at targeted sites in a controlled fashion. The targeted drug delivery systems limit the harmful side effects on healthy tissue by toxic drugs and furnish spatial and temporal control drug delivery, improved patient compliance, and treatment efficiency. The polymeric nanogels (hydrogel nanoparticles) with stimuli-responsive characteristics have shown great potential in various biomedical, tissue engineering, and pharmaceutical fields. It is primarily because of their small size, biocompatibility, biodegradability, stimuli-triggered drug deliverability, high payload capacity, and tailored functionality. This comprehensive review deals distinctively with polymeric nanogels, their chemical, physical, and biological stimuli, the concepts of nanogels response to different stimuli, and recent advancements. This document will further improve the current understanding of stimuli-responsive materials and drug delivery systems and assist in exploring advanced potential applications of these intelligent materials.

Biomimicry in nanotechnology: a comprehensive review

Biomimicry has been utilized in many branches of science and engineering to develop devices for enhanced and better performance. The application of nanotechnology has made life easier in modern times. It has offered a way to manipulate matter and systems at the atomic level. As a result, the miniaturization of numerous devices has been possible. Of late, the integration of biomimicry with nanotechnology has shown promising results in the fields of medicine, robotics, sensors, photonics, etc. Biomimicry in nanotechnology has provided eco-friendly and green solutions to the energy problem and in textiles. This is a new research area that needs to be explored more thoroughly. This review illustrates the progress and innovations made in the field of nanotechnology with the integration of biomimicry.

Novel Strategy of Polymers in Combination with Silica Particles for Reversible Control of Oil-Water Interface

Hybrid smart emulsification systems are highly applicable in manipulating oil-in-water (O/W) droplets. Herein, novel switchable block polymers containing both zwitterionic and tertiary amine pendent groups were designed and synthesized to combine with charged silica particles to stabilize the O/W emulsion responsive to pH. This study was carried out in O/W emulsions stabilized with the polymer and silica particles under different pH conditions. The emulsion system was also simulated using molecular dynamics simulation to reveal the mechanism at molecular levels, thus gaining insight into the relationships between the emulsifying properties and the molecular interaction of the mixed system. Upon acidification of the continuous aqueous phase, protonated polymers with excellent hydrophilicity were induced by charged silica particles to cause rapid emulsion coalescence. In alkaline media, the mixed system conversely stabilized the O/W emulsions, cutting polymer consumption by over three-quarters. The emulsification and demulsification can be switched alternately by tuning the pH conditions. The applications exhibited excellent efficiency in separating heavy oil/water emulsions and proved the high conversion rate in emulsion polymerization. Overall, with this novel strategy to relieve tedious modifications on particle surfaces and massive consumption of polymers, the designed responsive emulsification systems can impart intelligent and controllable chemical reactivity to emulsions on demand in a more affordable and sustainable way.

Colorimetric Sensor Based on Ag-Fe NTs for H2S Sensing

Meat waste is widely associated with spoilage caused by microbial growth and metabolism. Volatile compounds produced by microbial growth such as volatile sulfides could directly indicate the freshness of meat during distribution and storage. Herein, silver-iron nanotriangles (Ag-Fe NTs) for hydrogen sulfide (H₂S) detection were developed via one-pot facile reflux reactions. The Ag-Fe NTs were integrated into food packaging systems for the rapid, real-time, and nondestructive detection of the freshness of chilled broiler poultry. The principle of color development is that an increase in the volatile sulfide content leads to a change in the absorption wavelength caused by the etching of the Ag-Fe NTs, resulting in a color change (yellow to brown). The minimum H₂S concentrations detected by the naked eye and UV-vis spectrophotometer were 4 and 2 mg/m³, respectively. This label is economical and practical and can monitor the spoilage of chilled broiler meat products in real-time.

Bacteria-Activated Dual pH- and Temperature-Responsive Hydrogel for Targeted Elimination of Infection and Improved Wound Healing

Antibacterial treatment that provides on-demand release of therapeutics that can kill a broad spectrum of pathogens while maintaining long-term efficacy and without developing resistance or causing side effects is urgently required in clinical practice. Here, we demonstrate the development of a multistimuli-responsive hydrogel, prepared by cross-linking N-isopropylacrylamide with acrylic acid and loaded with ultrasmall silver nanoparticles (AgNPs), offering the on-demand release of Ag⁺ ions triggered by changes in the wound microenvironment. We demonstrate that this dual-responsive hydrogel is highly sensitive to a typical wound pH and temperature change, evidenced by the restricted release of Ag⁺ ions at acidic pH (<5.5) while significantly promoting the release in alkaline pH (>7.4) (>90% release). The pH-dependent release and antibacterial effect show minimal killing at pH 4 or 5.5 but dramatically activated at pH 7.4 and 10, eliminating >95% of the pathogens. The in vivo antibacterial efficacy and safety showed a high potency to clear Staphylococcus aureus wound infection while significantly accelerating the wound healing rate. This multifunctional hydrogel presents a promising bacteria-responsive delivery platform that serves as an on-demand carrier to not only reduce side effects but also significantly boost the antibacterial efficiency based on physiological needs. It offers great potential to improve the way wound infections are treated with direct clinical implications, providing a single platform for long-lasting application in wound management.

Graphene Oxide-alginate Hydrogel for Drawing Water through an Osmotic Membrane

We report the preparation and evaluation of graphene oxide (GO)-enhanced alginate hydrogels for drawing water across an osmotic desalination membrane. GO-incorporated calcium alginate hydrogels (GO-HG) and pure calcium alginate hydrogels (P-HG) were synthesized for this study. Environmental scanning electron microscopy, water contact angle, and water uptake tests showed both samples to be strongly hydrophilic. The synthesized hydrogels demonstrated the ability to successfully and continuously draw water through a selective osmotic membrane in experiments. This was driven by the surface energy gradient-induced negative pressure between the more hydrophilic hydrogel and less hydrophilic membrane surface. The GO-HG was found to draw 21.2% more water than the P-HG, owing to the flexible GO nanosheets, which can be easily incorporated into the hydrogel framework. The GO nanosheets not only offer more hydrophilic functional sites but also enhance the connectivity within the alginate hydrogel framework so as to enhance the water production performance. The average amount of water drawn through the membrane by the GO-HG and the P-HG is 23.4 ± 0.9 g and 19.3 ± 1.8 g, respectively. It was found that no external stimuli were needed as water flows through the hydrogel due to gravitational force. The GO-enhanced alginate hydrogel, combined with the osmotic membrane, is a promising surface energy gradient-driven functional material for water purification and desalination without applying external pressure.

Mimicking Color-Changing Organisms to Enable the Multicolors and Multifunctions of Smart Fluorescent Polymeric Hydrogels

Fluorescent polymer hydrogels (FPHs) are of significant interest for diverse emerging applications such as visualized sensing, smart display, camouflaging skins, soft actuators/robots, because they can synergize the features of classic fluorescent polymers and hydrogels. With great efforts in the past decades, the major challenge in this field has been believed to be not whether a given FPH of interest can be prepared but how to fabricate robust FPHs with multicolor tunability and multifunctional synergy. Such materials will conceptually minimize the contribution of passive materials to the mass and size of the final system, holding great potential to facilitate multiple applications. To this end, one promising way is to learn from the Nature that has superb capability to forge delicate or sometimes beyond-imagination materials. Chameleons and cephalopods serve as typical examples, which are famous for not only diverse skin color adaptability under changing environmental demands, but also synergistic skin color and body gesture changes to communicate, warn, camouflage, etc. Biological studies revealed their structural color-changing capacity derives from different types of skin chromatophores and their rational multilayer arrangement in under-skin tissues. Besides, their superb ability to heterogeneously integrate soft tissues with disparate functions into topology-optimized architectures has led to various multifunctional performances. Such natural strategies, if replicated and implemented in artificial systems, would significantly benefit and advance the development of robust FPHs for various applications.In this Account, we summarizes the key advances of smart FPHs mainly achieved by our groups. We start by introducing the unique hierarchical multilayer structures of skin chromatophores in structural color-changing reptiles, followed by an in-depth discussion on how a rational integration of bioinspiration and man-made design makes it possible to largely expand the fluorescence color-changing range of smart FPHs to almost cover the whole visible spectrum. Then, to closely mimic the multifunctional behaviors of chameleons and cephalopods, we further develop efficient strategies to introduce supramolecular interactions or heterogeneously integrating smart FPHs with other soft materials with disparate functions, producing a number of multifunctional fluorescent polymeric hydrogel systems. These robust FPHs can find many frontier applications, including bioinspired synergistic color/shape switchable hydrogel actuators/robots, smart systems with on-demand fluorescent patterning capacities for displaying or information encryption, as well as robust chemosensors for important food or environmental analytes. We expect that the discussion presented in this Account would promote better understanding of the discoloration systems in nature, and advance the development of bioinspired color-changing materials.

Poly(N-isopropylacrylamide)-Based Hydrogels for Biomedical Applications: A Review of the State-of-the-Art

A prominent research topic in contemporary advanced functional materials science is the production of smart materials based on polymers that may independently adjust their physical and/or chemical characteristics when subjected to external stimuli. Smart hydrogels based on poly(N-isopropylacrylamide) (PNIPAM) demonstrate distinct thermoresponsive features close to a lower critical solution temperature (LCST) that enhance their capability in various biomedical applications such as drug delivery, tissue engineering, and wound dressings. Nevertheless, they have intrinsic shortcomings such as poor mechanical properties, limited loading capacity of actives, and poor biodegradability. Formulation of PNIPAM with diverse functional constituents to develop hydrogel composites is an efficient scheme to overcome these defects, which can significantly help for practicable application. This review reports on the latest developments in functional PNIPAM-based smart hydrogels for various biomedical applications. The first section describes the properties of PNIPAM-based hydrogels, followed by potential applications in diverse fields. Ultimately, this review summarizes the challenges and opportunities in this emerging area of research and development concerning this fascinating polymer-based system deep-rooted in chemistry and material science.

An NIR-II Photothermally Triggered "Oxygen Bomb" for Hypoxic Tumor Programmed Cascade Therapy

Hypoxia, as a characteristic feature of solid tumors, has a close relationship with tumor resistance to photodynamic therapy (PDT) and chemotherapy. Perfluorocarbon (PFC) is reported to relieve hypoxic in solid tumors by acting as an oxygen carrier via several nanostructures. However, the oxygen delivery process is mostly driven by a concentration gradient, which is uncontrollable. Herein, a photothermally controlled "oxygen bomb" PSPP-Au₉₈₀ -D is designed by encapsulating a PFC core within a functionalized bilayer polymer shell. Near-infrared second window photothermal agent gold nanorods with excellent photo-to-heat energy-conversion ability are fabricated on the surface of the polymer shell via an innovative modified two-step seedless ex situ growth process to thermally trigger O₂  release. Then, a programmed cascade therapy strategy is customized for hypoxic orthotopic pancreatic cancer. First, PSPP-Au₉₈₀ -D is irradiated by a 980 nm laser to photothermally trigger O₂  infusing into the hypoxic tumor microenvironment, which is accompanied by local hyperemia and doxorubicin release. Subsequently, a 680 nm laser is used to generate singlet oxygen in the oxygenated tumor microenvironment for PDT. This choreographed programmed cascade therapy strategy will provide a new route for suppressing hypoxic tumor growth under mild conditions based on controllable and effective oxygen release.

Thermosensitive P(AAc-co-NIPAm) hydrogels display enhanced toughness and self-healing via ion-ligand interactions

Hydrogels containing thermosensitive polymers such as poly(N-isopropylacrylamide) (P(NIPAm)) may contract during heating and show great promise in fields ranging from soft robotics to thermosensitive biosensors. However, these gels often exhibit low stiffness, tensile strength, and mechanical toughness, limiting their applicability. Through copolymerization of P(NIPAm) with poly(Acrylic acid) (P(AAc)) and introduction of ferric ions (Fe³⁺ ) that coordinate with functional groups along the P(AAc) chains, we here introduce a thermoresponsive hydrogel with significantly enhanced mechanical extensibility, strength, and toughness. Using both experimentation and constitutive modeling, we find that increasing the ratio of m(AAc):m(NIPAm) in the prepolymer decreases strength and toughness but improves extensibility. In contrast, increasing Fe³⁺ concentration generally improves strength and toughness with little decrease in extensibility. Due to reversible coordination of the Fe³⁺ bonds, these gels display excellent recovery of mechanical strength during cyclic loading and self-healing ability. While thermosensitive contraction imbued by the underlying P(NIPAm) is reduced slightly with increased Fe³⁺ concentration, the temperature transition range is widened and shifted upwards towards that of human body temperature (between 30 and 40°C), perhaps rendering these gels suitable as in vivo biosensors. Finally, these gels display excellent adsorptive properties with a variety of materials, rendering them possible candidates in adhesive applications. This article is protected by copyright. All rights reserved.

Polymeric agents for activatable fluorescence, self-luminescence and photoacoustic imaging

Numerous polymeric agents have been widely applied in biology and medicine by virtue of the facile chemical modification, feasible nano-engineering approaches and fine-tuned pharmacokinetics. To endow polymeric imaging agents with ability to monitor and measure subtle molecular or cellular alterations at diseased sites, activatable polymeric probes that can elicit signal changes in response to biomolecular interactions or the analytes of interest have to be developed. Herein, this review aims to provide a systemic interpretation and summarization of the design methodology and imaging utility of recently emerged activatable polymeric probes. An introduction of activatable probes allowing for precise imaging and classification of polymeric imaging agents is reported first. Then, we give a detailed discussion of the contemporary design approaches toward activatable polymeric probes in diverse imaging modes for the detection of various stimuli and their imaging applications. Finally, current challenges and future advances are discussed and highlighted.

Photoluminescent polymer micelles with thermo-/pH-/metal responsibility and their features in selective optical sensing of Pd(ii) cations

Photoluminescent polymers can be divided into two types of structures: one is the well-known conventional π-conjugated rigid chain polymers bearing π-conjugated chromophores in their side chains, and the other is the common flexible polymers without π-conjugated chromophores in their main or side chains but with a feature of clustering electron-rich and/or dipole groups in their main and/or side chains. In this work, we found a new photoluminescent polymer comprising theophylline (T) and imidazole (I) residues in a suitable ratio in the side chains on the common polystyrenic block (PVB-T/I). We synthesized a block copolymer (denoted as P2) consisting of hydrophobic PVB-T/I and hydrophilic poly(N-isopropylacrylamide), and we investigated its self-assembly into micelles and their micellar features, such as thermo-responsibility, fluorescence emission, pH, and metal ion-dependent photoluminescence, in detail. Especially, the micelles self-assembled from P2 showed intrinsic blue emission which was emitted from the charge transfer association between T and I residues in the intra-chains. Weakening the association by adjustment of the pH or addition of metal ions could evidently reduce the photoluminescence in the micellar state. Very interestingly, among many metal cations, only Pd2+, which can chelate strongly with theophylline, strongly quenched the photoluminescence from the micelles. Therefore, the polymer micelles functioned as an optical sensor for Pd(ii) ion not only by spectroscopy but also with the naked eye.

Fluorescent and stimuli-responsive performance of polymer composites filled with tetraphenylethene derivatives

In this study, a series of tetraphenylethene (TPE) derivatives with 3-butenloxy moieties were synthesized. The developed TPE with different number of substituent groups showed controlled aggregation-induced emission performance and variable...

Combined fluorophore and phosphor conjugation: a new design concept for simultaneous and spatially localized dual lifetime intracellular sensing of oxygen and pH

In this communication, we propose a new strategy for double-parametric biosensing and present a dual pH/O₂ lifetime sensor based on the covalent conjugation of fluorescein (pH sensor) and an orthometalated iridium complex (O₂ sensor) to human serum albumin (HSA). The resulting conjugate demonstrates biocompatibility, low toxicity, and fast cellular uptake, and displays independent lifetime responses towards variations in media acidity and oxygen concentration that makes it suitable for application as an effective pH/O₂ probe in luminescence microscopy using the FLIM/PLIM detection mode. The concept applicability has been exemplified using the dual spatially and temporally localized intracellular sensing of pH and O₂ concentration in living cells.

Novel Lanthanide (III) Complexes Derived from an Imidazole-Biphenyl-Carboxylate Ligand: Synthesis, Structure and Luminescence Properties

A series of neutral mononuclear lanthanide complexes [Ln(HL)₂(NO₃)₃] (Ln = La, Ce, Nd, Eu, Gd, Dy, Ho) with rigid bidentate ligand, HL (4'-(1H-imidazol-1-yl)biphenyl-4-carboxylic acid) were synthesized under solvothermal conditions. The coordination compounds have been characterized by infrared spectroscopy, thermogravimetry, powder X-ray diffraction and elemental analysis. According to X-ray diffraction, all the complexes are a series of isostructural compounds crystallized in the P2/n monoclinic space group. Additionally, solid-state luminescence measurements of all complexes show that [Eu(HL)₂(NO₃)₃] complex displays the characteristic emission peaks of Eu(III) ion at 593, 597, 615, and 651 nm.

Aggregation induced emission (AIE) molecules for measurement of intracellular temperature, pH, and viscosity sensing

This book chapter presents insightful growth and progress in the field of sensing especially, temperature, pH, and viscosity sensing. We focus more on aggregation-induced emission (AIE)-active materials for measuring intracellular pH, viscosity, and temperature by means of fluorescence and absorption study. A special emphasis is given on AIE active fluorescent molecules, molecular rotors, polymeric nanomaterials which are considered as the important aspects of sense. It also gives the fundamental and brief understanding between these different AIE active material and its application in biological systems.

Towards conductive hydrogels in e-skins: a review on rational design and recent developments

Over the past decades, electronic skins (e-skins) have attracted significant attention owing to their feasibility of applications in health monitoring, motion detection, and entertainment. As a class of soft materials, conductive hydrogels feature biocompatibility, stretchability, adhesiveness, and self-healing properties, making them one of the most important candidates for high-performance e-skins. However, profound challenges remain for achieving the combination of superior mechanical strength and conductivity of conductive hydrogels simultaneously without sacrificing their multifunctionalities. Herein, a framework for rational designs to fabricate conductive hydrogels are proposed, including the fundamental strategies of copolymerization, doping, and self-assembly. In addition, we provide a comprehensive analysis of their merits and demerits when the conductive hydrogels are fabricated in different ways. Furthermore, the recent progress and future perspective for conductive hydrogels in terms of electronic skins are highlighted.

Preparation of highly colloidal stable Yolk-Shell nanocomposite and its multi-stimuli responsive based on surface aggregation-induced emission (S-AIE)

Multi-stimuli responsive fluorescence probe could pave the way for monitoring more complex environmental changes. Here we prepared multifunctional nanoparticle Fe₃O₄@SiO₂@P(DMAEMA-co-TPEE), which displayed yolk-shell morphology with well-defined polymer brush. With superparamagnetic Fe₃O₄ component and pH/temperature dual sensitive PDMAEMA polymer brush, the as prepared nanoparticles (YS-NPs) exhibited as multi-stimuli responsive fluorescence probe for real-time visual monitoring of environmental changes such as magnetic field, temperature and pH. Such YS-NPs could also be applied as a sensitive detector for CO₂ in aqueous solution. Notably, the solution of YS-NPs showed high colloidal stability during the environmental changes, and surface aggregation-induced emission (S-AIE) was proposed for the aggregation of TPE residue on the surface of YS-NPs.

Aggregation-Induced Emission-Active Gels: Fabrications, Functions, and Applications

Chromophores that exhibit aggregation-induced emission (i.e., aggregation-induced emission luminogens [AIEgens]) emit intense fluorescence in their aggregated states, but show negligible emission as discrete molecular species in solution due to the changes in restriction and freedom of intramolecular motions. As solvent-swollen quasi-solids with both a compact phase and a free space, gels enable manipulation of intramolecular motions. Thus, AIE-active gels have attracted significant interest owing to their various distinctive properties and promising application potential. Herein, a comprehensive overview of AIE-active gels is provided. The fabrication strategies employed are detailed, and the applications of AIEgens are summarized. In addition, the gel functions arising from the AIE moieties are revealed, along with their structure-property relationships. Furthermore, the applications of AIE-active gels in diverse areas are illustrated. Finally, ongoing challenges and potential means to address them are discussed, along with future perspectives on AIE-active gels, with the overall aim of inspiring research on novel materials and ideas.

Bi and Sb Codoped Cs2Ag0.1Na0.9InCl6 Double Perovskite with Excitation-Wavelength-Dependent Dual-Emission for Anti-Counterfeiting Application

The growing demands for optical anti-counterfeiting technology require the development of new environmentally friendly materials with single component, multimodal fluorescence and high stability. Herein, the Bi/Sb codoped Cs₂Ag_0.1Na_0.9InCl₆ lead-free double perovskite material is reported as an efficient multimodal luminescence material with excitation-wavelength-dependent emission. When excited by 360 nm UV light, dual-emission is observed at 455 and 560 nm, which comes from the ³P₁-¹S₀ transition of Sb³⁺ ions and self-trapped excitons (STEs), respectively. Under the 320 nm UV lamp, the microcrystals show only a blue emission centered at 455 nm. Therefore, the Bi/Sb codoped Cs₂Ag_0.1Na_0.9InCl₆ double perovskite emits blue and yellow lights under the 320 and 360 nm UV lamp, respectively. Moreover, the obtained double perovskite shows a high PLQY up to 41% and excellent stability against both air and high temperature, which make it a promising anti-counterfeiting material.

A Smart Patch with On-Demand Detachable Adhesion for Bioelectronics

A smart ionic skin patch with on-demand detachable adhesion has been developed as human-machine interface for physiological signal monitoring. In spite of the multifunctions demonstrated by existing ionic skin, it is still difficult to distinguish different signals simultaneously. Moreover, the secondary damages to the tissues are often overlooked when the adhesive materials are removing from the wound. Herein, a multifunctional biomimetic hydrogel with temperature, mechanical, electrical, and pH response is developed. This hydrogel is designed by in situ polymerizing of hydrophilic anion monomers in a natural cationic polysaccharide to construct multifunctional biomimetic ionic channel. Due to the reversible physical cross-linked network and thermosensitivity, the mechanical properties, adhesion, and visual effect of the hydrogel can be tuned by changing hydrogen bonding density via phase transition, thus making it an excellent biosafe material for wearable device. The hydrogel is utilized as skin patch intended for monitoring physiological signals stimulated by physical and chemical changes involving pressure, temperature, pH value, and electrocardiograph. Especially, this ionic skin patch can recognize temperature change signals precisely either in broad or extremely narrow temperature range. This smart skin patch can even recognize the pressure and temperature signals in real time and differentiate the signals simultaneously.

Ultrabright Fluorescent Silica Nanoparticles for Dual pH and Temperature Measurements

The mesoporous nature of silica nanoparticles provides a novel platform for the development of ultrabright fluorescent particles, which have organic molecular fluorescent dyes physically encapsulated inside the silica pores. The close proximity of the dye molecules, which is possible without fluorescence quenching, gives an advantage of building sensors using FRET coupling between the encapsulated dye molecules. Here we present the use of this approach to demonstrate the assembly of ultrabright fluorescent ratiometric sensors capable of simultaneous acidity (pH) and temperature measurements. FRET pairs of the temperature-responsive, pH-sensitive and reference dyes are physically encapsulated inside the silica matrix of ~50 nm particles. We demonstrate that the particles can be used to measure both the temperature in the biologically relevant range (20 to 50 °C) and pH within 4 to 7 range with the error (mean absolute deviation) of 0.54 °C and 0.09, respectively. Stability of the sensor is demonstrated. The sensitivity of the sensor ranges within 0.2-3% °C-1 for the measurements of temperature and 2-6% pH-1 for acidity.

Advances in Multiple Stimuli-Responsive Drug-Delivery Systems for Cancer Therapy

Nanomedicines afford unique advantages in therapeutic intervention against tumors. However, conventional nanomedicines have failed to achieve the desired effect against cancers because of the presence of complicated physiological fluids and the tumor microenvironment. Stimuli-responsive drug-delivery systems have emerged as potential tools for advanced treatment of cancers. Versatile nano-carriers co-triggered by multiple stimuli in different levels of organisms (eg, extracorporeal, tumor tissue, cell, subcellular organelles) have aroused widespread interest because they can overcome sequential physiological and pathological barriers to deliver diverse therapeutic “payloads” to the desired targets. Furthermore, multiple stimuli-responsive drug-delivery systems (MSR-DDSs) offer a good platform for co-delivery of agents and reversing multidrug resistance. This review affords a comprehensive overview on the “landscape” of MSR-DDSs against tumors, highlights the design strategies of MSR-DDSs in recent years, discusses the putative advantage of oncotherapy or the obstacles that so far have hindered the clinical translation of MSR-DDSs.

Reversible temperature-dependent photoluminescence in semiconductor quantum dots for the development of a smartphone-based optical thermometer

Photoluminescence (PL) intensity-based non-contact optical temperature sensors are in great demand due to their non-contact nature, rapid response, sensitivity, as well as thermal and chemical stability at different environmental conditions. However, herein, reversible temperature dependent PL emission quenching properties of chemically synthesized Mn²⁺-doped ZnS QDs (MZQDs) have been advantageously utilized for achieving the development of a smartphone-based optical thermometer. The temperature dependent variations of PL have been studied by taking MZQDs in various forms, such as in aqueous dispersion, powder form, and a polymer-encapsulated thin film. The origin of the PL quenching of MZQD in the polymer film has been cross-verified through temperature-dependent electrical conductivity measurement and the movement of charge carriers has also been confirmed by the first-principles DFT simulation. Through thermal cycling experiments on QD-encapsulated polymer film and by utilizing an indigenously-developed Android App based on color coordinates, a novel smartphone-based colorimetric imaging method for the measurement of temperature has been demonstrated in this work. The synthesized smart QDs might be suitable candidates for temperature sensing and the colorimetric thermometer probe may be utilized in various photonics applications as a smart optical sensor for daily life applications.

Stimuli-responsive engineered living materials

Stimuli-responsive materials are able to undergo controllable changes in materials properties in response to external cues. Increasing efforts have been directed towards building materials that mimic the responsive nature of biological systems. Nevertheless, limitations remain surrounding the way these synthetic materials interact and respond to their environment. In particular, it is difficult to synthesize synthetic materials that respond with specificity to poorly differentiated (bio)chemical and weak physical stimuli. The emerging area of engineered living materials (ELMs) includes composites that combine living cells and synthetic materials. ELMs have yielded promising advances in the creation of stimuli-responsive materials that respond with diverse outputs in response to a broad array of biochemical and physical stimuli. This review describes advances made in the genetic engineering of the living component and the processing-property relationships of stimuli-responsive ELMs. Finally, the implementation of stimuli-responsive ELMs as environmental sensors, biomedical sensors, drug delivery vehicles, and soft robots is discussed.