Giant Voltage Enhancement via Triboelectric Charge Supplement Channel for Self-Powered Electroadhesion

Charge Generation and Enhancement of Key Components of Triboelectric Nanogenerators: A Review

The past decade has witnessed remarkable progress in high-performance Triboelectric nanogenerators (TENG) with the design and synthesis of functional dielectric materials, the exploration of novel dynamic charge transport mechanisms, and the innovative design of architecture, making it one of the most crucial technologies for energy harvesting. High output charge density is fundamental for TENG to expand its application scope and accelerate industrialization; it depends on the dynamic equilibrium of charge generation, trapping, de-trapping, and migration within its core components. Here, this review classifies and summarizes innovative approaches to enhance the charge density of the charge generation, charge trapping, and charge collection layers. The milestone of high charge density TENG is reviewed based on material selection and innovative mechanisms. The state-of-the-art principles and techniques for generating high charge density and suppressing charge decay are discussed and highlighted in detail, and the distinct charge transport mechanisms, the technologies of advanced materials preparation, and the effective charge excitation strategy are emphatically introduced. Lastly, the bottleneck and future research priorities for boosting the output charge density are summarized. A summary of these cutting-edge developments intends to provide readers with a deep understanding of the future design of high-output TENG.

High-Performance Rotating Structure Triboelectric-Electromagnetic Hybrid Nanogenerator for Environmental Wind Energy Harvesting

As environmental energy harvesting gains increasing importance in self-powered systems and large-scale energy demands, wind energy, as a clean, pollution-free, and renewable source, has garnered widespread attention. However, achieving efficient wind energy collection remains challenging. This study proposes a high-performance rotating structure triboelectric-electromagnetic hybrid nanogenerator designed for environmental wind energy harvesting. By optimizing the magnetic circuit design of the electromagnetic generator, the dispersed radial magnetic field is converted into a unified axial magnetic field, enabling efficient power generation with only a single annular coil, thereby simplifying the generator design and reducing manufacturing and maintenance costs. Additionally, a triboelectric nanogenerator design with soft contact friction between polycarbonate (PC) fur and fluorinated ethylene propylene (FEP) film was implemented, optimizing the spacing between the electrode and friction layers, thus enhancing output performance and device durability. Furthermore, we simulated and experimentally tested the output waveform of the designed hybrid generator structure, with the results showing a high degree of similarity, further validating the rationality of the device design and providing guidance for structural optimization. Subsequently, we achieved efficient energy storage using an energy management circuit (EMC). With the integration of the EMC, the generator successfully powered a Bluetooth temperature and humidity sensor at a wind speed of 10 m/s, achieving wireless transmission, and demonstrating its potential application in traffic signal systems and other natural environmental systems. This research provides an important reference for further exploration of novel wind energy harvesting technologies.

Superior electroadhesion force with permittivity-engineered bilayer films using electrostatic simulation and machine learning approaches

Electroadhesive forces are crucial in various applications, including grasping devices, electro-sticky boards, electrostatic levitation, and climbing robots. However, the design of electroadhesive devices relies on speculative or empirical error approaches. Therefore, we present a theoretical model comprising predictive coplanar electrodes and protective layers for analyzing the electrostatic fields between an object and electroadhesive device. The model considers the role of protective layer and the air gap between the electrode surface and the object. To exert a higher electroadhesive force, the higher permeability of the protective layer is required. However, a high permeability of the protective layer is hard to withstand high applied voltage. To overcome this, two materials with different permeabilities were employed as protective layers-a low-permeability inner layer and a high-permeability outer layer-to maintain a high voltage and generate a large electroadhesive force. Because a low-permeability inner layer material was selected, a more permeable outer layer material was considered. A theoretical analysis revealed complex relationships between various design parameters. The impact of key design parameters and working environments on the electroadhesion behavior was further investigated. This study reveals the fundamental principles of electroadhesion and proposes prospective methods to enhance the design of electroadhesive devices for various engineering applications.

Dual polarity open circuit voltage in triboelectric nanogenerators originated from two states series impedance

Experimental and simulation studies demonstrated that the initial voltage setting significantly influences the open-circuit voltage (VOC) in triboelectric nanogenerators (TENGs). Utilizing diode configurations, we consistently observed two distinct VOCs independent of the initial settings. A lower VOC corresponded to the surface voltage (VSurface), while a higher VOC was amplified by the product of the VSurface and the TENG's characteristic impedance ratio. Notably, a lower measurement system capacitance provided a more precise representation of the inherent characteristics of the TENG. Conversely, an increase in system impedance led to a convergence of the two VOCs and a reduction in their magnitudes relative to VSurface. These findings suggest that optimizing the initial/repeated charge balancing and minimizing capacitive loads are crucial for maximizing TENG output power in practical applications.

Ultrafast Metal-Free Microsupercapacitor Arrays Directly Store Instantaneous High-Voltage Electricity from Mechanical Energy Harvesters

Harvesting renewable mechanical energy is envisioned as a promising and sustainable way for power generation. Many recent mechanical energy harvesters are able to produce instantaneous (pulsed) electricity with a high peak voltage of over 100 V. However, directly storing such irregular high-voltage pulse electricity remains a great challenge. The use of extra power management components can boost storage efficiency but increase system complexity. Here utilizing the conducting polymer PEDOT:PSS, high-rate metal-free micro-supercapacitor (MSC) arrays are successfully fabricated for direct high-efficiency storage of high-voltage pulse electricity. Within an area of 2.4 × 3.4 cm2 on various paper substrates, large-scale MSC arrays (comprising up to 100 cells) can be printed to deliver a working voltage window of 160 V at an ultrahigh scan rate up to 30 V s-1. The ultrahigh rate capability enables the MSC arrays to quickly capture and efficiently store the high-voltage (≈150 V) pulse electricity produced by a droplet-based electricity generator at a high efficiency of 62%, significantly higher than that (<2%) of the batteries or capacitors demonstrated in the literature. Moreover, the compact and metal-free features make these MSC arrays excellent candidates for sustainable high-performance energy storage in self-charging power systems.

A Review of Contact Electrification at Diversified Interfaces and Related Applications on Triboelectric Nanogenerator

The triboelectric nanogenerator (TENG) can effectively collect energy based on contact electrification (CE) at diverse interfaces, including solid-solid, liquid-solid, liquid-liquid, gas-solid, and gas-liquid. This enables energy harvesting from sources such as water, wind, and sound. In this review, we provide an overview of the coexistence of electron and ion transfer in the CE process. We elucidate the diverse dominant mechanisms observed at different interfaces and emphasize the interconnectedness and complementary nature of interface studies. The review also offers a comprehensive summary of the factors influencing charge transfer and the advancements in interfacial modification techniques. Additionally, we highlight the wide range of applications stemming from the distinctive characteristics of charge transfer at various interfaces. Finally, this review elucidates the future opportunities and challenges that interface CE may encounter. We anticipate that this review can offer valuable insights for future research on interface CE and facilitate the continued development and industrialization of TENG.

Advances in Bioresorbable Triboelectric Nanogenerators

With the growing demand for next-generation health care, the integration of electronic components into implantable medical devices (IMDs) has become a vital factor in achieving sophisticated healthcare functionalities such as electrophysiological monitoring and electroceuticals worldwide. However, these devices confront technological challenges concerning a noninvasive power supply and biosafe device removal. Addressing these challenges is crucial to ensure continuous operation and patient comfort and minimize the physical and economic burden on the patient and the healthcare system. This Review highlights the promising capabilities of bioresorbable triboelectric nanogenerators (B-TENGs) as temporary self-clearing power sources and self-powered IMDs. First, we present an overview of and progress in bioresorbable triboelectric energy harvesting devices, focusing on their working principles, materials development, and biodegradation mechanisms. Next, we examine the current state of on-demand transient implants and their biomedical applications. Finally, we address the current challenges and future perspectives of B-TENGs, aimed at expanding their technological scope and developing innovative solutions. This Review discusses advancements in materials science, chemistry, and microfabrication that can advance the scope of energy solutions available for IMDs. These innovations can potentially change the current health paradigm, contribute to enhanced longevity, and reshape the healthcare landscape soon.

Recent Progress of Advanced Materials for Triboelectric Nanogenerators

Triboelectric nanogenerators (TENGs) have received intense attention due to their broad application prospects in the new era of internet of things (IoTs) as distributed power sources and self-powered sensors. Advanced materials are vital components for TENGs, which decide their comprehensive performance and application scenarios, opening up the opportunity to develop efficient TENGs and expand their potential applications. In this review, a systematic and comprehensive overview of the advanced materials for TENGs is presented, including materials classifications, fabrication methods, and the properties required for applications. In particular, the triboelectric, friction, and dielectric performance of advanced materials is focused upon and their roles in designing the TENGs are analyzed. The recent progress of advanced materials used in TENGs for mechanical energy harvesting and self-powered sensors is also summarized. Finally, an overview of the emerging challenges, strategies, and opportunities for research and development of advanced materials for TENGs is provided.

Soft Bioelectronics for Therapeutics

Soft bioelectronics play an increasingly crucial role in high-precision therapeutics due to their softness, biocompatibility, clinical accuracy, long-term stability, and patient-friendliness. In this review, we provide a comprehensive overview of the latest representative therapeutic applications of advanced soft bioelectronics, ranging from wearable therapeutics for skin wounds, diabetes, ophthalmic diseases, muscle disorders, and other diseases to implantable therapeutics against complex diseases, such as cardiac arrhythmias, cancer, neurological diseases, and others. We also highlight key challenges and opportunities for future clinical translation and commercialization of soft therapeutic bioelectronics toward personalized medicine.

Measuring electro-adhesion pressure before and after contact

Electro-adhesion (EA) is a low-power, tunable, fast and reversible electrically-controlled adhesion method, effective on both conducting and insulating objects. Typically, only the electro-adhesive detachment force, i.e., the force required to separate an object from the EA patch, is measured. Here, we report a method that enables comparing the pre-contact EA attachment forces with post-contact EA detachment forces. We observe that pre-contact pressures are 1 to 100 times lower than post-contact detachment pressures, indicating the large role played by surface forces, charge injection, and polarization inertia. We characterize the time-dependence of pre- and post-contact EA forces as a function of the applied voltage waveform, observing that using an AC drive allowing for much faster release than DC operation. We measure both EA forces on conductive and insulating objects, using over 100 different EA patches covering a wide range of electrode dimensions. At 400 V, the EA release pressures for conductive objects range from 1 to 100 kPa, and are 1 to 10 times higher than pre-contact adhesion force. For dielectric objects, release pressures are 1 to 100 higher than pre-contact adhesion pressures. The methodology presented in this paper can enable standardized EA characterization while varying numerous parameters.

Recent Advances in Triboelectric Nanogenerators: From Technological Progress to Commercial Applications

Serious climate changes and energy-related environmental problems are currently critical issues in the world. In order to reduce carbon emissions and save our environment, renewable energy harvesting technologies will serve as a key solution in the near future. Among them, triboelectric nanogenerators (TENGs), which is one of the most promising mechanical energy harvesters by means of contact electrification phenomenon, are explosively developing due to abundant wasting mechanical energy sources and a number of superior advantages in a wide availability and selection of materials, relatively simple device configurations, and low-cost processing. Significant experimental and theoretical efforts have been achieved toward understanding fundamental behaviors and a wide range of demonstrations since its report in 2012. As a result, considerable technological advancement has been exhibited and it advances the timeline of achievement in the proposed roadmap. Now, the technology has reached the stage of prototype development with verification of performance beyond the lab scale environment toward its commercialization. In this review, distinguished authors in the world worked together to summarize the state of the art in theory, materials, devices, systems, circuits, and applications in TENG fields. The great research achievements of researchers in this field around the world over the past decade are expected to play a major role in coming to fruition of unexpectedly accelerated technological advances over the next decade.

A supramolecular gel-elastomer system for soft iontronic adhesives

Electroadhesion provides a promising route to augment robotic functionalities with continuous, astrictive, and reversible adhesion force. However, the lack of suitable conductive/dielectric materials and processing capabilities have impeded the integration of electroadhesive modules into soft robots requiring both mechanical compliance and robustness. We present herein an iontronic adhesive based on a dynamically crosslinked gel-elastomer system, including an ionic organohydrogel as adhesive electrodes and a resilient polyurethane with high electrostatic energy density as dielectric layers. Through supramolecular design and synthesis, the dual-material system exhibits cohesive heterolayer bonding and autonomous self-healing from damages. Iontronic soft grippers that seamlessly integrate actuation, adhesive prehension, and exteroceptive sensation are devised via additive manufacturing. The grippers can capture soft and deformable items, bear high payload under reduced voltage input, and rapidly release foreign objects in contrast to electroadhesives. Our materials and iontronic mechanisms pave the way for future advancement in adhesive-enhanced multifunctional soft devices.

Direct Writing of Silver Nanowire Patterns with Line Width down to 50 μm and Ultrahigh Conductivity

Direct writing of one-dimensional nanomaterials with large aspect ratios into customized, highly conductive, and high-resolution patterns is a challenging task. In this work, thin silver nanowires (AgNWs) with a length-to-diameter ratio of 730 are employed as a representative example to demonstrate a potent direct ink writing (DIW) strategy, in which aqueous inks using a natural polymer, sodium alginate, as the thickening agent can be easily patterned with arbitrary geometries and controllable structural features on a variety of planar substrates. With the aid of a quick spray-and-dry postprinting treatment at room temperature, the electrical conductivity and substrate adhesion of the written AgNWs-patterns improve simultaneously. This simple, environment benign, and low-temperature DIW strategy is effective for depositing AgNWs into patterns that are high-resolution (with line width down to 50 μm), highly conductive (up to 1.26 × 105 S/cm), and mechanically robust and have a large alignment order of NWs, regardless of the substrate's hardness, smoothness, and hydrophilicity. Soft electroadhesion grippers utilizing as-manufactured interdigitated AgNWs-electrodes exhibit an increased shear adhesion force of up to 15.5 kPa at a driving voltage of 3 kV, indicating the strategy is very promising for the decentralized and customized manufacturing of soft electrodes for future soft electronics and robotics.

A Dual-Functional Triboelectric Nanogenerator Based on the Comprehensive Integration and Synergetic Utilization of Triboelectrification, Electrostatic Induction, and Electrostatic Discharge to Achieve Alternating Current/Direct Current Convertible Outputs

Traditional alternating current (AC) and direct current (DC) triboelectric nanogenerators (TENGs), which are implemented via the pairwise coupling of triboelectrification, electrostatic induction, and electrostatic discharge, have been widely explored in various fields. In this work, the comprehensive integration and synergetic utilization of triboelectrification, electrostatic induction, and electrostatic discharge in a single device for the first time is realized, achieving a dual-functional TENG (DF-TENG) to produce an AC/DC convertible output. Distinguishing from the conventional TENGs, the coupling of triboelectrification and electrostatic discharge enables charge circulation between the dielectric tribo-layers, while electrostatic induction realizes charge transfer in the external circuit. This novel energy conversion mechanism has been proven to be applicable to a variety of materials, including polymers, fabrics, and semiconductors. The output mode of the DF-TENG can be tuned by adjusting the slider motion state, and its constant output current and power density can reach 1.51 mA m^-2 Hz^-1 and 398 mW m^-2 Hz^-1 , respectively, which are the highest records reported for constant DC-TENGs to date. This work not only provides a paradigm shift to achieve AC/DC convertible output, but it also exhibits high potential for extending the TENG design philosophy.

Recent Progress in Piezoelectric-Triboelectric Effects Coupled Nanogenerators

Piezoelectric and triboelectric nanogenerators have been widely studied in the past years for their advantages of easy design/manufacturing, small size, and flexibility. Nanogenerators that are developed based on the coupled piezoelectric and triboelectric effects (PTCNG) can make full use of the mechanical energies and achieve both higher output and sensing performance. This review aims to cover the recent research progress of PTCNG by presenting in detail their key technologies in terms of operating principles, integration concept, and performance enhancement strategies, with a focus on their structural simplification and efficiency performance improvement. The latest applications of PTCNG in tactile sensors and energy-harvesting system are also illustrated. Finally, we discuss the main challenges and prospects for the future development of PTCNG, hoping that this work can provide a new insight into the development of all-in-one mechanical energy-scavenging and sensing devices.

From Triboelectric Nanogenerator to Multifunctional Triboelectric Sensors: A Chemical Perspective toward the Interface Optimization and Device Integration

Triboelectric nanogenerators (TENGs) have intrigued scientists for their potential to alleviate the energy shortage crisis and facilitate self-powered sensors. Triboelectric interfaces containing triboelectric functionalized molecular groups and tunable surface charge densities are important for improving the electrical output capability of TENGs and the versatility of future electronics. In this review, following an introduction to the fundamental progress of TENG systems for mechanic energy harvesting, surface modifications that aim to increase the surface charge density and functionality are highlighted, with an emphasis on interfacial chemical modification and triboelectric energetics/dynamics optimization for efficient electrostatic induction and charge transfer. Recent advances in assemblies of multifunctional triboelectric sensing are briefly introduced, and future challenges and chemical perspectives in the field of TENG-based electronics are concisely reviewed. This review presents and advances the understanding of the state-of-the-art chemical strategies toward rational triboelectric interface engineering and system assembly and is expected to guide the rational design of highly efficient and versatile triboelectric sensing.

Rationally Structured Triboelectric Nanogenerator Arrays for Harvesting Water-Current Energy and Self-Powered Sensing

Water-current energy is an enormous and widely distributed clean energy in nature, with different scales from large ocean flow to small local turbulence. However, few effective technologies have been proposed to make use of different forms of water currents as a power source. Here, high-performance paired triboelectric nanogenerators (P-TENGs) capable of integrating massively into a thin flexible layer as a structured triboelectric surface (STS) are demonstrated for harvesting water-current energy. Novel gas packet exchange structure and rigid-flexible coupling deformation mechanism are introduced to ensure that the device can work very effectively even in deep water under high water pressure. The rationally designed TENG array in the STS enables highly efficient power take-off from the flow. Typically, the STS demonstrates a high-frequency output up to 57 Hz, largely superior to current TENG devices, and the power density is improved by over 100 times for triboelectric devices harvesting current energy. The flexible STS is capable of attaching to various surfaces or applying independently for self-powered sensing and underwater power supply, showing great potential for water-current energy utilization. Moreover, the work also initiates universal strategies to fabricate high-frequency devices under large environment pressure, which may profoundly enrich the design of TENGs.

Multidimensional Force Sensors Based on Triboelectric Nanogenerators for Electronic Skin

The ability to detect multidimensional forces is highly desired for electronic skin (E-skin) sensors. Here, based on single-electrode-mode triboelectric nanogenerators (S-TENGs), fully elastic E-skin that can simultaneously sense normal pressure and shear force has been proposed. With the hemispherical curve-structure design and further structural optimization, the pressure sensor exhibits a high linearity and sensitivity of 144.8 mV/kPa in the low-pressure region. By partitioning the lower tribolayer into two symmetric parts, a multidimensional force sensor has been fabricated in which the output voltage sum and ratio of the two S-TENGs can be used for normal pressure and shear force sensing, respectively. When the multidimensional force sensors are mounted at a two-fingered robotic manipulator, the change of the grabbing state can be recognized, indicating that the sensor may have great application potential in tactile sensing for robotic manipulation, human-robot interactions, environmental awareness, and object recognition.

Study of Contact Electrification at Liquid-Gas Interface

It is known that the suspended liquid droplets in clouds can generate electrostatic charges, which finally results in the lightning. However, the detailed mechanism related to the contact-electrification process on the liquid-gas (L-G) interfaces is still poorly understood. Here, by introducing an acoustic levitation method for levitating a liquid droplet, we have studied the electrification mechanism at the L-G interface. The tribo-motion between water droplets and air induced by the ultrasound wave leads to the generation of positive charges on the surface of the droplets, and the charge amount of water droplets (20 μL) gradually reaches saturation within 30 s. The mixed solid particles in droplets can increase the amount of transferred charge, whereas the increase of ion concentration in the droplet can suppress the charge generation. This charge transfer phenomenon at L-G interfaces and the related analysis can be a guidance for the study in many fields, including anti-static, harvesting rainy energy, micro/nano fluidics, triboelectric power generator, surface engineering, and so on. Moreover, the surface charge generation due to L-G electrification is an inevitable effect during ultrasonic levitation, and thus, this study can also work for the applications of the ultrasonic technique.

Self-Powered Acceleration Sensor Based on Multilayer Suspension Structure and TPU-RTV Film for Vibration Monitoring

In this paper, we designed a triboelectric acceleration sensor with excellent multiple parameters. To more easily detect weak vibrations, the sensor was founded on a multilayer suspension structure. To effectively improve the electrical properties of the sensor, a surface roughening and internal doping friction film, which was refined with a room temperature vulcanized silicone rubber (RTV) and some thermoplastic polyurethanes (TPU) powder in a certain proportion, was integrated into the structure. It was found that the optimization of the RTV film increases the open circuit voltage and short circuit current of the triboelectric nanogenerator (TENG) by 223% and 227%, respectively. When the external vibration acceleration is less than 4 m/s², the sensitivity and linearity are 1.996 V/(m/s²) and 0.999, respectively. Additionally, when it is in the range between 4 m/s² and 15 m/s², those are 23.082 V/(m/s²) and 0.975, respectively. Furthermore, the sensor was placed in a simulated truck vibration environment, and its self-powered monitoring ability validated by experiments in real time. The results show that the designed sensor has strong practical value in the field of monitoring mechanical vibration acceleration.

Achieving ultrahigh instantaneous power density of 10 MW/m2 by leveraging the opposite-charge-enhanced transistor-like triboelectric nanogenerator (OCT-TENG)

Converting various types of ambient mechanical energy into electricity, triboelectric nanogenerator (TENG) has attracted worldwide attention. Despite its ability to reach high open-circuit voltage up to thousands of volts, the power output of TENG is usually meager due to the high output impedance and low charge transfer. Here, leveraging the opposite-charge-enhancement effect and the transistor-like device design, we circumvent these limitations and develop a TENG that is capable of delivering instantaneous power density over 10 MW/m² at a low frequency of ~ 1 Hz, far beyond that of the previous reports. With such high-power output, 180 W commercial lamps can be lighted by a TENG device. A vehicle bulb containing LEDs rated 30 W is also wirelessly powered and able to illuminate objects further than 0.9 meters away. Our results not only set a record of the high-power output of TENG but also pave the avenues for using TENG to power the broad practical electrical appliances.

TENG suffers from two fundamental limitations: high output impedance and low charge transfer. Herein, these limitations are circumvented by leveraging the opposite-charge-enhancement effect and transistor-like device design, thereby achieving the instantaneous power density over 10 MW/m² at the low frequency of ~ 1 Hz.

Low-Cost, Environmentally Friendly, and High-Performance Triboelectric Nanogenerator Based on a Common Waste Material

With the great progress in human activities and production technologies, the waste inevitably produced causes not only environmental pollution but also resource waste; meanwhile, the mobile and portable electronic devices urgently need a distributed and sustainable energy source to ensure their stable operation. Here, the waste pollutants (milk cartons) generated from daily life, commonly associated with environmental concerns, are instead identified as an available resource for preparing an emerging energy harvester (triboelectric nanogenerator, TENG), which can convert ubiquitous mechanical energy into electric power. Consequently, based on the waste material, the initial charge density of the TENG is as low as 0.035 mC m^-2, which can be tremendously improved to 1.00 mC m^-2 through combining a charge excitation circuit, achieving efficient energy harvesting. In addition, compared to the common dielectric film, the waste material can reduce the cost and simplify the process of the preparation of TENG. This work provides not only an innovative approach to simultaneously realize environmental protection and energy harvesting but also more material choice for the preparation of a low-cost and high-performance TENG.

An Ultra-Simple Charge Supplementary Strategy for High Performance Rotary Triboelectric Nanogenerators

Free-standing rotary triboelectric nanogenerators (rTENG) can accomplish special tasks which require both high voltage and high frequency. However, the reported high performance rTENG all have complex structures for output enhancement. In this work, an ultra-simple strategy to build high performance rTENG is developed. With only one small paper strip added to the conventional structure, the output of the TENG is promoted hugely. The voltage is triplicated to 2.3 kV, and the current and charge are quintupled to 133 µA and 197 nC, respectively. The small paper strip, with the merits of ultra-simplicity, wide availability, easy accessibility and low cost, functions as a super-effective charge supplement. This simple and delicate structure enables ultra-high durability with the 2.3 kV voltage output 100% maintained after 1 000 000 cycles. This charge supplementary strategy is universally effective for many other materials, and decouples the output enhancement from any friction or contact on the metal electrodes, emphasizing a critical working principle for the rTENG. Atmospheric cold plasma is generated using the paper strip rTENG (ps-rTENG), which demonstrates strong ability to do bacteria sterilization. This simple and persistent charge supplementary strategy can be easily adopted by other designs to promote the output even further.

Volatile organic compounds sensing based on Bennet doubler-inspired triboelectric nanogenerator and machine learning-assisted ion mobility analysis

Ion mobility analysis is a well-known analytical technique for identifying gas-phase compounds in fast-response gas-monitoring systems. However, the conventional plasma discharge system is bulky, operates at a high temperature, and inappropriate for volatile organic compounds (VOCs) concentration detection. Therefore, we report a machine learning (ML)-enhanced ion mobility analyzer with a triboelectric-based ionizer, which offers good ion mobility selectivity and VOC recognition ability with a small-sized device and non-strict operating environment. Based on the charge accumulation mechanism, a multi-switched manipulation triboelectric nanogenerator (SM-TENG) can provide a direct current (DC) bias at the order of a few hundred, which can be further leveraged as the power source to obtain a unique and repeatable discharge characteristic of different VOCs, and their mixtures, with a special tip-plate electrode configuration. Aiming to tackle the grand challenge in the detection of multiple VOCs, the ML-enhanced ion mobility analysis method was successfully demonstrated by extracting specific features automatically from ion mobility spectrometry data with ML algorithms, which significantly enhance the detection ability of the SM-TENG based VOC analyzer, showing a portable real-time VOC monitoring solution with rapid response and low power consumption for future internet of things based environmental monitoring applications.

A universal managing circuit with stabilized voltage for maintaining safe operation of self-powered electronics system

Harvesting mechanical energy via a triboelectric nanogenerator (TENG) is a promising strategy for solving energy problems. However, it is necessary to develop an effective and safe energy managing circuit for preventing high voltage breaking electronic devices. Here, a universal managing circuit is developed to optimize TENG's output performance, which for the first time allows the TENG to safely power various sensor systems with a safe and stable voltage. Based on the circuit, TENG's output can be transformed into a stable voltage with tunable amplitude, while an enhanced short-circuit current of 94 mA with an energy loss lower than 5% is achieved. For demonstrations, three different types of TENGs, respectively, targeting at ocean energy, wind energy, and walking energy have been prepared to reveal the capability of the circuit. This study offers a strategy to greatly enhance the output performance of TENGs to provide useful guidance for constructing self-powered and distributed sensor systems.

•

UMC is designed for a TENG to maintain stable voltage with a lower resistance

•

UMC provides a short-circuit current of 94 mA with an energy loss lower than 5%

•

UMC can completely avoid the breakdown of electronic devices due to TENG's high voltage

•

Three self-powered sensor systems have been successfully established

Toward Healthcare Diagnoses by Machine-Learning-Enabled Volatile Organic Compound Identification

As a natural monitor of health conditions for human beings, volatile organic compounds (VOCs) act as significant biomarkers for healthcare monitoring and early stage diagnosis of diseases. Most existing VOC sensors use semiconductors, optics, and electrochemistry, which are only capable of measuring the total concentration of VOCs with slow response, resulting in the lack of selectivity and low efficiency for VOC detection. Infrared (IR) spectroscopy technology provides an effective solution to detect chemical structures of VOC molecules by absorption fingerprints induced by the signature vibration of chemical stretches. However, traditional IR spectroscopy for VOC detection is limited by the weak light-matter interaction, resulting in large optical paths. Leveraging the ultrahigh electric field induced by plasma, the vibration of the molecules is enhanced to improve the light-matter interaction. Herein, we report a plasma-enhanced IR absorption spectroscopy with advantages of fast response, accurate quantization, and good selectivity. An order of ∼kV voltage was achieved from the multiswitched manipulation of the triboelectric nanogenerator by repeated sliding. The VOC species and their concentrations were well-quantified from the wavelength and intensity of spectra signals with the enhancement from plasma. Furthermore, machine learning has visualized the relationship of different VOCs in the mixture, which demonstrated the feasibility of the VOC identification to mimic patients.

Self-powered droplet manipulation system for microfluidics based on triboelectric nanogenerator harvesting rotary energy

Microfluidic technology, as a method for manipulating tiny fluids, has the advantages of low sample consumption, fast reaction, and no cross-contamination. In a microfluidic system, accurate manipulation of droplets is a crucial technology that has been widely investigated. In this work, a self-powered droplet manipulation system (SDMS) is proposed to realize various droplet operations, including moving, splitting, merging, mixing, transporting chemicals and reacting. The SDMS is mainly composed of a triboelectric nanogenerator (TENG), an electric brush, and a microfluidic device. The TENG serves as a high-voltage source to power the system. Using different electric brushes and microfluidic devices, different manipulations of droplets can be achieved. Moreover, by experiments and simulations, the influence of the electrode width, the electrode gap and the central angle of one electrode on the performance of SDMS is analyzed in detail. Firstly, by using electrowetting-on-dielectric (EWOD) technology, SDMS can accurately control droplets for long-distance linear movement and simultaneously control multiple droplets to move in a circular electrode track consisting of 40 electrodes. SDMS can also manipulate two droplets of different components to merge and react. In addition, using dielectrophoresis (DEP) technology, SDMS can separate droplets with maximum volumes of 400 μL and reduce the time of the complete mixing of two droplets with different components by 6.3 times compared with the passive mixing method. Finally, the demonstration shows that a droplet can be manipulated by hand power for chemical delivery and chemical reactions on a circular electrode track without an external power source, which proves the applicability of SDMS as an open-surface microfluidic device. Therefore, the self-powered droplet manipulation system proposed in this work may have great application in the fields of drug delivery, micro chemical reactions, and biological microanalysis.

Triboelectric Nanogenerators and Hybridized Systems for Enabling Next-Generation IoT Applications

In the past few years, triboelectric nanogenerator-based (TENG-based) hybrid generators and systems have experienced a widespread and flourishing development, ranging among almost every aspect of our lives, e.g., from industry to consumer, outdoor to indoor, and wearable to implantable applications. Although TENG technology has been extensively investigated for mechanical energy harvesting, most developed TENGs still have limitations of small output current, unstable power generation, and low energy utilization rate of multisource energies. To harvest the ubiquitous/coexisted energy forms including mechanical, thermal, and solar energy simultaneously, a promising direction is to integrate TENG with other transducing mechanisms, e.g., electromagnetic generator, piezoelectric nanogenerator, pyroelectric nanogenerator, thermoelectric generator, and solar cell, forming the hybrid generator for synergetic single-source and multisource energy harvesting. The resultant TENG-based hybrid generators utilizing integrated transducing mechanisms are able to compensate for the shortcomings of each mechanism and overcome the above limitations, toward achieving a maximum, reliable, and stable output generation. Hence, in this review, we systematically introduce the key technologies of the TENG-based hybrid generators and hybridized systems, in the aspects of operation principles, structure designs, optimization strategies, power management, and system integration. The recent progress of TENG-based hybrid generators and hybridized systems for the outdoor, indoor, wearable, and implantable applications is also provided. Lastly, we discuss our perspectives on the future development trend of hybrid generators and hybridized systems in environmental monitoring, human activity sensation, human-machine interaction, smart home, healthcare, wearables, implants, robotics, Internet of things (IoT), and many other fields.

Triboelectric and Piezoelectric Nanogenerators for Future Soft Robots and Machines

The triboelectric nanogenerator (TENG) and piezoelectric nanogenerator (PENG) are two recently developed technologies for effective harvesting of ambient mechanical energy for the creation of self-powered systems. The advantages of TENGs and PENGs which include large open-circuit output voltage, low cost, ease of fabrication, and high conversion efficiency enable their application as new flexible sensors, wearable devices, soft robotics, and machines. This perspective provides an overview of the current state of the art in triboelectric and piezoelectric devices that are used as self-powered sensors and energy harvesters for soft robots and machines; hybrid approaches that combine the advantages of both mechanisms are also discussed. To improve system performance and efficiency, the potential of providing self-powered soft systems with a degree of multifunctionality is investigated. This includes optical sensing, transparency, self-healing, water resistance, photo-luminescence, or an ability to operate in hostile environments such as low temperature, high humidity, or high strain/stretch. Finally, areas for future research directions are identified.

Self-charging power system for distributed energy: beyond the energy storage unit

Power devices for the smart sensor networks of Internet of things (IoT) are required with minimum or even no maintenance due to their enormous quantities and widespread distribution. Self-charging power systems (SCPSs) refer to integrated energy devices with simultaneous energy harvesting, power management and effective energy storage capabilities, which may need no extra battery recharging and can sustainably drive sensors. Herein, we focus on the progress made in the field of nanogenerator-based SCPSs, which harvest mechanical energy using the Maxwell displacement current arising from the variation in the surface-polarized-charge-induced electrical field. Prototypes of different nanogenerator-based SCPSs will be overviewed. Finally, challenges and prospects in this field will be discussed.

Fabrication of flexible self-powered humidity sensor based on super-hydrophilic titanium oxide nanotube arrays

Stable and flexible super-hydrophilic nanotubular-based titanium oxide electrode has been utilized as the active electrode of self-powered humidity sensor. TiO₂ nanotubular electrodes fabricated through anodization method and utilized in combination with Kapton electrode as the triboelectric nanogenerator (TENG). Vertical contact-separation mode TENG performance has been examined in various range of frequencies and the maximum output voltage and current more than 300 V and 40 μA respectively with maximum power of 1.25 ± 0.67 mW has been achieved at 4 Hz. The fabricated TENG has been employed as the active self-powered humidity sensor. Super-hydrophilic feature of TiO₂ nanotubes resulted in full absorption of water molecules, and noticeable decrease in charge transfer across two triboelectric materials upon increasing humidity. The TiO₂-based TENG sensor was exposed to various relative humidity (RH) and the results showed that by increasing the humidity the output voltage and output current decreased from 162.24 ± 35.99 V and 20.4 ± 4.93 μA at RH = 20% to 37.92 ± 1.54 V at RH = 79% and 40.87 88 6.88 ± 1.7 μA at RH = 84%, respectively, Which shows the responsivity more than 300%. This method of measuring humidity has a simple and cost-effective fabrication that has various applications in many fields such as industry and medicine.

Enhancing Dry Adhesion of Polymeric Micropatterns by Electric Fields

Micropatterned dry adhesives rely mainly on van der Waals interactions. In this paper, we explore the adhesion strength increase that can be achieved by superimposing an electrostatic field through interdigitated subsurface electrodes. Micropatterns were produced by replica molding in silicone. The adhesion forces were characterized systematically by means of experiments and numerical modeling. The force increased with the square of the applied voltage for electric fields up to 800 V. For larger fields, a less-than-quadratic scaling was observed, which is likely due to the small, field-dependent electrical conductivity of the materials involved. The additional adhesion force was found to be up to twice of the field-free adhesion. The results suggest an alternative method for the controlled handling of fragile or miniaturized objects.

All-Soft Skin-Like Structures for Robotic Locomotion and Transportation

Human skins are active, smart, and stretchable. Artificial skins that can replicate these properties are promising materials and technologies that will enable lightweight, cost-effective, portable, and deployable soft devices and robots. We show an active, stretchable, and portable artificial skin (ElectroSkin) that combines dielectric elastomer actuators (DEAs) and soft electroadhesives (EAs) in a fully compliant multilayer composite skin-like structure. By taking advantage of the common characteristics of DEA and EA, we define regions of the composite artificial skin as either active or passive. Active areas can be exploited as electromechanical actuators or as electrostatic gripper elements, or both simultaneously. This embedded multimodality delivers a new technology of deformable active skins that can grip and move objects and self-locomote. ElectroSkins can be fabricated using all-soft elastomers and readily available conductive materials. We demonstrate their capabilities in the first soft self-actuating conveyor belt, with a conveyoring speed of 0.28 mm/s, and a pocketable fully soft crawler robot. This new, self-actuating, self-gripping, and self-locomoting soft artificial skin has the potential to significantly impact on functional soft-smart composites, deployable robots, soft-smart conveyoring, and compliant gripping and manipulation applications.

Switched-capacitor-convertors based on fractal design for output power management of triboelectric nanogenerator

Owing to the advantages of integration and being magnet-free and light-weight, the switched-capacitor-convertor plays an increasing role compared to traditional transformer in some specific power supply systems. However, the high output impedance and switching loss largely reduces its power efficiency, due to imperfect topology and transistors. Herein, we propose a fractal-design based switched-capacitor-convertors with characteristics including high conversion efficiency, minimum output impedance, and electrostatic voltage applicability. As a double-function output power management system for triboelectric nanogenerators, it delivers over 67 times charge boosting and 954 W m-2 power density in pulse mode, and achieves over 94% total energy transfer efficiency in constant mode. The establishment of the fractal-design switched-capacitor-convertors provides significant guidance for the development of power management toward multi-functional output for numerous applications. The successful demonstration in triboelectric nanogenerators also declares its great potential in electric vehicles, DC micro-grids etc.

Quantifying contact status and the air-breakdown model of charge-excitation triboelectric nanogenerators to maximize charge density

Surface charge density is the key factor for developing high performance triboelectric nanogenerators (TENG). The previously invented charge excitation TENG provides a most efficient way to achieve maximum charge output of a TENG device. Herein, criteria to quantitatively evaluate the contact efficiency and air breakdown model on charge excitation TENG are established to enhance and evaluate charge density. The theoretical results are further verified by systematic experiments. A high average charge density up to 2.38 mC m-2 is achieved using the 4 μm PEI film and homemade carbon/silicone gel electrode in ambient atmosphere with 5% relative humidity. This work also reveals the actual charge density (over 4.0 mC m-2) in a TENG electrode based on quantified surface micro-contact efficiency and provides a prospective technical approach to improve the charge density, which could push the output performance of TENG to a new horizon.

Environmental energy harvesting based on triboelectric nanogenerators

With the fast development of the Internet of Things, the energy supply for electronics and sensors has become a critical challenge. The triboelectric nanogenerator (TENG), which can transfer mechanical energy from the surrounding environment into electricity, has been recognized as the most promising alternative technology to remedy the shortcomings of traditional battery technology. Environmental mechanical energy widely exists in activities in nature and these environmental energy sources can enable TENGs to achieve a clean and distributed energy network, which can finally benefit the innovation of various wireless devices. In this review, TENGs targeting different environmental energy sources have been systematically summarized and analyzed. Firstly, we give a brief introduction to the basic principle and working modes of the TENG. Then, TENGs targeting different energy sources, from blowing wind and raindrops to pounding waves, noise signalling, and so on, are summarized based on their design concept and output performance. In addition, combined with other energy technologies such as solar cells, electromagnetic generators, and piezoelectric nanogenerators, the application of hybrid nanogenerators is elaborated under different scenarios. Finally, the challenges, limitations, and future research trends of environmental energy collection are outlined.

Triboelectric effect-modulated varifocal liquid lens

Electrically modulated varifocal liquid lenses, which are usually modulated by an external high voltage power source, have attracted much attention due to their bright application prospects in artificial optical systems. Here, a triboelectric nanogenerator (TENG)-based varifocal liquid lens (TVLL) has been demonstrated, in which the focal length can be directly modulated by external mechanical sliding. A dielectrophoretic force is generated by the TENG through the transfer of triboelectric charges in the asymmetric electrodes, which is used to continuously change the shape of the air-liquid interface between concave and convex without any complicated boost converter. Moreover, a triboelectric magnifying glass based on the accurate modulation effect of the TVLL on a light beam has been demonstrated. In this work, the TENG is used as a medium to modulate and accurately control the focal length of the liquid lens by an external mechanical stimulus, which may have great applications in micro-optical-electro-mechanical systems (MOEMS), human-machine interaction, artificial vision systems, etc.

Probing Contact-Electrification-Induced Electron and Ion Transfers at a Liquid-Solid Interface

As a well-known phenomenon, contact electrification (CE) has been studied for decades. Although recent studies have proven that CE between two solids is primarily due to electron transfer, the mechanism for CE between liquid and solid remains controversial. The CE process between different liquids and polytetrafluoroethylene (PTFE) film is systematically studied to clarify the electrification mechanism of the solid-liquid interface. The CE between deionized water and PTFE can produce a surface charges density in the scale of 1 nC cm^-2 , which is ten times higher than the calculation based on the pure ion-transfer model. Hence, electron transfer is likely the dominating effect for this liquid-solid electrification process. Meanwhile, as ion concentration increases, the ion adsorption on the PTFE hinders electron transfer and results in the suppression of the transferred charge amount. Furthermore, there is an obvious charge transfer between oil and PTFE, which further confirms the presence of electron transfer between liquid and solid, simply because there are no ions in oil droplets. It is demonstrated that electron transfer plays the dominant role during CE between liquids and solids, which directly impacts the traditional understanding of the formation of an electric double layer (EDL) at a liquid-solid interface in physical chemistry.

Self-Sustainable Wearable Textile Nano-Energy Nano-System (NENS) for Next-Generation Healthcare Applications

Wearable electronics presage a future in which healthcare monitoring and rehabilitation are enabled beyond the limitation of hospitals, and self-powered sensors and energy generators are key prerequisites for a self-sustainable wearable system. A triboelectric nanogenerator (TENG) based on textiles can be an optimal option for scavenging low-frequency and irregular waste energy from body motions as a power source for self-sustainable systems. However, the low output of most textile-based TENGs (T-TENGs) has hindered its way toward practical applications. In this work, a facile and universal strategy to enhance the triboelectric output is proposed by integration of a narrow-gap TENG textile with a high-voltage diode and a textile-based switch. The closed-loop current of the diode-enhanced textile-based TENG (D-T-TENG) can be increased by 25 times. The soft, flexible, and thin characteristics of the D-T-TENG enable a moderate output even as it is randomly scrunched. Furthermore, the enhanced current can directly stimulate rat muscle and nerve. In addition, the capability of the D-T-TENG as a practical power source for wearable sensors is demonstrated by powering Bluetooth sensors embedded to clothes for humidity and temperature sensing. Looking forward, the D-T-TENG renders an effective approach toward a self-sustainable wearable textile nano-energy nano-system for next-generation healthcare applications.

Environmental Energy Harvesting Adapting to Different Weather Conditions and Self-Powered Vapor Sensor Based on Humidity-Responsive Triboelectric Nanogenerators

Triboelectric nanogenerators (TENGs) have been widely applied for energy harvesting and self-powered sensing, whereas smart deformable materials can be combined with the TENG to acquire a more intelligent and self-adaptive system. Here, based on the vapor-driven actuation material of a perfluorosulfonic acid ionomer (PFSA), we propose a type of humidity-responsive TENG. The integrated TENG array can automatically bend to the desired angles in response to different humidity conditions, and thus, it can effectively collect energy from both wind and rain drops, where the power density can reach 1.6 W m^-2 at a wind speed of 25 m s^-1 and 230 mW m^-2 under rainy conditions. Meanwhile, this TENG array can fully lay down in dry weather, using the reflective surface to reflect sunlight and heat radiation. The vapor absorption process of the PSFA film can also result in the charge accumulation process. Accordingly, relying on the strong absorption capability of PFSA, a TENG-based vapor sensor with high sensitivity has been developed for monitoring chemical vapor leakage and humidity change. This work opens up a promising approach for the application of the humidity-responsive materials in the field of energy harvesting and self-powered sensors. It can also promote the development of TENG toward a more intelligent direction.

Three-Dimensional Topological Insulator Bi2Te3/Organic Thin Film Heterojunction Photodetector with Fast and Wideband Response from 450 to 3500 Nanometers

In the pursuit of broadband photodetection materials from visible to mid-IR region, the fresh three-dimensional topological insulators (3D TIs) are theoretically predicted to be a promising candidate due to its Dirac-like stable surface state and high absorption rate. In this work, a self-powered inorganic/organic heterojunction photodetector based on n-type 3D TIs Bi₂Te₃ combined with p-type pentacene thin film was designed and fabricated. Surprisingly, it was found that the Bi₂Te₃/pentacene heterojunction photodetector exhibited a fast and wideband response from 450 to 3500 nm. The optimized responsivity of photodetector reached 14.89 A/W, along with the fast response time of 1.89 ms and the ultrahigh external quantum efficiency of 2840%. Moreover, at the mid-IR 3500 nm, our devices demonstrated a responsivity of 1.55 AW^-1, which was several orders of magnitude higher than that of previous 3D TIs photodetector. These excellent properties indicate that the inorganic/organic heterojunction, that is, the combination of 3D TIs with organic materials, is an exciting structure for high performance photodetectors in the wideband detection region. On account of the fact that the device is constructed on mica substrate, this work also represents a potential scenario for flexible optoelectronic devices.