Highly Efficient Metal-Free Nitrogen-Doped Nanocarbons with Unexpected Active Sites for Aerobic Catalytic Reactions

N/Se co-doped porous carbon catalyst derived from a deep eutectic solvent and chitosan as green precursors: Investigation of catalytic activity for metal-free oxidation of alcohols

Heteroatom-doped porous carbon-based materials with high surface area compared to their metal-based homologs are considered environmentally friendly and ideal catalysts for organic reactions. In this paper, a new method for the convenient fabrication, cost-effective, and high efficiency of nitrogen/selenium co-doped porous carbon-based catalysis (marked as N/SePC-T) was designed. The N/SePC-T catalysts were created from the direct pyrolysis of a eutectic solvent containing choline chloride/urea as the nitrogen-rich carbon source, selenium dioxide as a source of heteroatom and chitosan as a secondary carbon source in different temperatures (T). The efficacy of the carbonization temperature on the pore structure, morphology, and catalytic activity of the N/SePC-T materials was investigated and displayed, the N/SePC-900 (having a surface area of 562.01 m2/g and total pore volume of 0.2351 cm3 g-1) has the best performance. The morphology, structure, and physicochemical properties of N/SePC-900 were characterized using various analyses including XRD, TEM, TGA, FE-SEM, EDX, FT-IR, XPS, and Raman. The optimized N/SePC-900 catalyst indicated excellent catalytic performance in the oxidation of benzylalcohols to corresponding aldehydes in very mild conditions.

Nitrogen-Doped Porous Carbon Derived from Covalent Triazine Framework for Catalytic Oxidation of Benzyl Alcohol

The catalytic oxidation of alcohols is an important transformation in the chemical industry. Carbon materials with a large surface area and N doping show great promise as metal-free catalysts for the reaction. In this study, a rich N-containing covalent triazine framework polymerized by cyanuric chloride and p-phenylenediamine was used to synthesize N-doped porous carbon with the assistance of a pore-forming agent-NaCl. First, the mass ratio of the polymer/NaCl was optimized to 1:9. Then, the influence of the pyrolysis temperatures (700-1000 °C) on the materials was studied in detail. It was found that the carbon materials were gradually exfoliated by molten salt at high temperatures. XRD and Raman characterizations showed them with a certain graphitization. The optimal doped carbon CNN-1-9-900 achieved the highest surface area of 199.03 m2g-1 with the largest pore volume of 0.29 cm3g-1. Furthermore, it had a high N content of 9.9 at% with the highest relative proportion of pyridinic/graphitic N. Due to the synergistic effect between the surface area and pyridinic/graphitic N, CNN-1-9-900 showed the best performance for benzyl alcohol oxidation with TBHP at moderate conditions, and the process also worked for its derivatives.

Recent Advances in Mechanistic Understanding of Metal-Free Carbon Thermocatalysis and Electrocatalysis with Model Molecules

Metal-free carbon, as the most representative heterogeneous metal-free catalysts, have received considerable interests in electro- and thermo-catalytic reactions due to their impressive performance and sustainability. Over the past decade, well-designed carbon catalysts with tunable structures and heteroatom groups coupled with various characterization techniques have proposed numerous reaction mechanisms. However, active sites, key intermediate species, precise structure-activity relationships and dynamic evolution processes of carbon catalysts are still rife with controversies due to the monotony and limitation of used experimental methods. In this Review, we summarize the extensive efforts on model catalysts since the 2000s, particularly in the past decade, to overcome the influences of material and structure limitations in metal-free carbon catalysis. Using both nanomolecule model and bulk model, the real contribution of each alien species, defect and edge configuration to a series of fundamentally important reactions, such as thermocatalytic reactions, electrocatalytic reactions, were systematically studied. Combined with in situ techniques, isotope labeling and size control, the detailed reaction mechanisms, the precise 2D structure-activity relationships and the rate-determining steps were revealed at a molecular level. Furthermore, the outlook of model carbon catalysis has also been proposed in this work.

Confining Bimetal Sites in Porous Metal Silicate Materials for Aerobic Oxidation of Phenols under Mild Conditions

Inspired by the unique catalytic properties of enzymes, numerous biomimetic catalysts have been developed with the intention to realize activation of unreactive reactants under mild conditions; however, the requirement of harsh activation conditions heavily deters their practical applications. We report herein a porous metal silicate (PMS) material PMS-12 that consists of redox-active copper and vanadium metal sites, which exhibits similar catalytic behaviors of enzymes by synergistically activating different reactant molecules and generating local redox potential to facilitate electron and charge transfer, demonstrating the highest catalytic efficiency for aerobic oxidation of phenols to produce highly value-added benzoquinones under mild conditions. Therefore, this work paves a practically applicable strategy for developing high-performance heterogeneous catalysts, which could activate unreactive reactant molecules to produce highly value-added chemicals under mild conditions.

A Review on the Catalytic Remediation of Dyes by Tailored Carbon Dots

Water polluted with dyes has become a serious global concern during the twenty-first century, especially for developing countries. Such types of environmental contaminant pose a severe threat to biodiversity, ecosystems, and human health globally; therefore, its treatment is an utmost requirement. Advanced technologies including the use of nanomaterials represent a promising water treatment technology with high efficiencies, low production costs, and green synthesis. Among the nanomaterials, carbon dots, as a new class of carbon-based nanoparticles, have attracted attention due to their unique features and advantages over other nanomaterials, which include high water solubility, easy fabrication and surface functionalisation, excellent electron-donating ability, and low toxicity. Such properties make carbon dots potential nanocatalysts for the Fenton-like degradation of environmental pollutants in water. Although recent studies show that carbon dots can successfully catalyse the degradation of dyes, there are still limited and controversial studies on the ecotoxicity and fate of these nanoparticles in the environment. In this review, the authors aim to summarise the recent research advances in water remediation by technologies using carbon dots, discuss important properties and factors for optimised catalytic remediation, and provide critical analysis of ecotoxicity issues and the environmental fate of these nanoparticles.

Identification of active sites of B/N co-doped nanocarbons in selective oxidation of benzyl alcohol

Developing highly active and stable nanocarbon catalysts for selective oxidation reactions has attracted much attention due to their potential as an alternative to traditional metal-based or noble metal catalysts. However, the nature of active sites and the reaction mechanism of nanocarbon catalysts for oxidation reactions still remains largely unknown, which hinders the rational design and development of highly efficient carbon-based catalysts. Here we report a facile strategy for the synthesis of boron and nitrogen co-doped carbon nanosheet material (BNC), which exhibits excellent catalytic activity with 91% conversion and 99% selectivity in selective oxidation of benzyl alcohol into benzaldehyde, superior to those of traditional carbon materials (oxidized carbon nanotubes, graphites and commercial nanocarbons). Structural characterizations and kinetic measurements are studied to clarify the active site, in which phenolic hydroxyl on BNC is responsible for the production of benzaldehyde. Meanwhile, we put forward a possible reaction mechanism and point out the key factors in determining the reactivity for this reaction. Therefore, the present work provides new insight into structure-function relationships, paving the way for the development of highly efficient nanocarbon catalysts.

Magnetized manganese-doped watermelon rind biochar as a novel low-cost catalyst for improving oxygen reduction reaction in microbial fuel cells

Microbial fuel cells (MFCs) are promising equipment for water treatment and power generation. The catalyst used in the oxygen reduction reaction (ORR) at the cathode is a critical factor for efficacy of MFCs. Therefore, it is important to develop cost-effective cathode catalysts to enhance application of MFCs. In the current study, a novel cathode catalyst was developed, which was annealed with watermelon rind as raw material and transition metals including iron, and manganese were introduced. The 700Mn/Fe@WRC catalyst, which was annealed at 700 °C, exhibited excellent electrochemical performance. The high relative content of pyridine nitrogen caused by the inherent nitrogen element of the watermelon rind and the high content of iron and manganese elements introduced resulted in increase in electrochemical surface area to 657.6 m²/g. The number of electrons transferred ORR was 3.96, indicating that ORR occurs through a four-electron pathway. The maximum power density of MFCs was 399.3 ± 7.4 mW/m² with a fitting total internal resistance of 15.242 Ω, and the removal efficiency of COD was 97.1 ± 1.2%. The cost of the 700Mn/Fe@WRC catalyst was approximately 0.15 $/g, which is significantly lower compared with Pt/C (33.0 $/g). Experimental verification showed that the 700Mn/Fe@WRC prepared using the economical watermelon rind biochar (WRC) is an excellent substitute for non-precious metal catalysts used in MFCs.

Mechanistic insight into the active centers of single/dual-atom Ni/Fe-based oxygen electrocatalysts

Single-atom catalysts with maximum metal utilization efficiency show great potential for sustainable catalytic applications and fundamental mechanistic studies. We here provide a convenient molecular tailoring strategy based on graphitic carbon nitride as support for the rational design of single-site and dual-site single-atom catalysts. Catalysts with single Fe sites exhibit impressive oxygen reduction reaction activity with a half-wave potential of 0.89 V vs. RHE. We find that the single Ni sites are favorable to promote the key structural reconstruction into bridging Ni-O-Fe bonds in dual-site NiFe SAC. Meanwhile, the newly formed Ni-O-Fe bonds create spin channels for electron transfer, resulting in a significant improvement of the oxygen evolution reaction activity with an overpotential of 270 mV at 10 mA cm⁻². We further reveal that the water oxidation reaction follows a dual-site pathway through the deprotonation of *OH at both Ni and Fe sites, leading to the formation of bridging O₂ atop the Ni-O-Fe sites.

The development of high performance dual-site single-atom catalysts is a promising research direction. Here, the authors report structural dynamics of dual-site nickel-iron single-atom oxygen electrocatalysts under reaction conditions, and proposes a dual-site pathway for the water oxidation reaction.

Recent advances in metal-free heteroatom-doped carbon heterogonous catalysts

The development of cost-effective, efficient, and novel catalytic systems is always an important topic for heterogeneous catalysis from academia and industrial points of view. Heteroatom-doped carbon materials have gained more and more attention as effective heterogeneous catalysts to replace metal-based catalysts, because of their excellent physicochemical properties, outstanding structure characteristics, environmental compatibility, low cost, inexhaustible resources, and low energy consumption. Doping of heteroatoms can tailor the properties of carbons for different utilizations of interest. In comparison to pure carbon catalysts, these catalysts demonstrate superior catalytic activity in many organic reactions. This review highlights the most recent progress in synthetic strategies to fabricate metal-free heteroatom-doped carbon catalysts including single and multiple heteroatom-doped carbons and the catalytic applications of these fascinating materials in various organic transformations such as oxidation, hydrogenation, hydrochlorination, dehydrogenation, etc.

Highly Efficient Synthesis of p-Benzoquinones Catalyzed by Robust Two-Dimensional POM-Based Coordination Polymers

Selective oxidation of alkyl-substituted phenols offers efficient access to p-benzoquinones (BQs) that serve as key components for synthesizing biologically active compounds, but rational manufacture of efficient recyclable catalysts for such a reaction remains a severe challenge. Herein, two crystalline 2D polyoxometalate-based coordination polymers (POMCPs), formulated as H₃[Cu^I₃(L)₃]₂[PM₁₂O₄₀]·xH₂O (M = Mo, x = 4 for 1; M = W, x = 6 for 2; and HL = 4-(1H-tetazol-5-yl)pyridine), are prepared by a mineralizer-assisted one-step synthesis strategy and explored as heterogeneous catalysts for p-BQs synthesis. Both compounds have been characterized through elemental analysis, EDS analysis, infrared spectroscopy, UV-vis diffuse reflectance spectrum, EPR, XPS, BET, single-crystal, and powder X-ray diffraction. Single-crystal X-ray diffraction analysis indicates that both 1 and 2 exhibit an interesting 2D sheet structure composed of 2-connected Keggin type anions [PM₁₂O₄₀]^3- and hexa-nuclear {Cu^I₆(HL)₆} cluster-based metal-organic chains via Cu···O interactions. When used as catalysts, POMCPs 1 and 2 have excellent catalytic activities in the selective oxidation of substituted phenols to p-BQs with H₂O₂. Notedly, in the model reaction from 2,3,6-trimethylphenol (TMP) to the vitamin E key intermediate trimethyl-p-benzoquinone (TMBQ), the catalytic activities expressed by turnover frequency (TOF) of 1 and 2 can reach an unprecedented 2400 and 2000 h^-1, respectively, at close to 100% TMBQ yield. The truly heterogeneous nature, stability, and structural integrity of both catalysts were ascertained by FTIR, PXRD techniques, and the following cycles. Mechanism studies reveal that both catalysts can involve a dual reaction pathway through a heterolytic oxygen atom transfer mechanism and homolytic radical mechanism. Moreover, the 2D POMCPs with highly accessible bilateral active sites and efficient mass transfer efficiency possess superior catalytic performance to their analogous 3D species.

Overall Oxygen Electrocatalysis on Nitrogen-Modified Carbon Catalysts: Identification of Active Sites and In Situ Observation of Reactive Intermediates

The recent mechanistic understanding of active sites, adsorbed intermediate products, and rate-determining steps (RDS) of nitrogen (N)-modified carbon catalysts in electrocatalytic oxygen reduction (ORR) and oxygen evolution reaction (OER) are still rife with controversy because of the inevitable coexistence of diverse N configurations and the technical limitations for the observation of formed intermediates. Herein, seven kinds of aromatic molecules with designated single N species are used as model structures to investigate the explicit role of each common N group in both ORR and OER. Specifically, dynamic evolution of active sites and key adsorbed intermediate products including O2 (ads), superoxide anion O2 - *, and OOH* are monitored with in situ spectroscopy. We propose that the formation of *OOH species from O2 - * (O2 - *+H2 O→OOH*+OH- ) is a possible RDS during the ORR process, whereas the generation of O2 from OOH* species is the most likely RDS during the OER process.

Aza-aromatic polycycles based on triphenylene and acridine or acridone: synthesis and properties

Our attempts to N-arylate anilines with 2-iodotriphenylene and then cyclize with the adjacent carbonyl group are reported.