Strategic Doping Approach of the Fe-BiOI Microstructure: An Improved Photodegradation Efficiency of Tetracycline

Synergistic integration of ZrO2-enriched reduced graphene oxide-based nanostructures for advanced photodegradation of tetracycline hydrochloride

The escalating demand for the antibiotic drug tetracycline hydrochloride (TCH) contributes to an increased release of its residues into land and water bodies, which poses risks to both aquatic life and human health. Therefore, it is precedence to effectively degrade TCH residues to protect environment from their long-term impacts. In this aspect, the present study entails the synthesis of zirconia (ZrO2) nanostructures and focuses on the enhancement in the catalytic performance of ZrO2 nanostructures by employing reduced graphene oxide (RGO) as a solid support to synthesize ZrO2-enriched RGO-based photocatalysts (ZrO2-RGO) for the degradation of TCH. The study delves into comprehensive spectroscopic and microscopic investigations and their photodegradation assessments. Powder XRD and HR-TEM studies depicted the phase crystallinity and also displayed uniform distribution of ZrO2 nanostructures with spherical morphology within ZrO2-RGO. This corresponds to high surface-to-volume ratios, providing a substantial number of active sites for light absorption and generation of e--h+ pairs. Moreover, the heterojunctions created between RGO and ZrO2 nanostructures promoted the interspecies electron transfer which prolonged the recombination time of e- and h+ than pure ZrO2 nanostructures, accounted for enhanced degradation of TCH using ZrO2-RGO. The photocatalytic activity of as-synthesized materials were examined under visible and UV light irradiation. The degradation efficiency of ~ 73.82% was achieved using ZrO2-RGO-based photocatalyst with rate constant k = 0.007023 min-1 under visible-light illumination. Moreover, under UV-light, the degradation rate was explicated to be k = 0.01017 min-1 with ~ 85.56% degradation of TCH antibiotics within 180 mins. Hence, the synthesized ZrO2-enriched RGO-based photocatalysts represents a promising potential for the effective degradation of pharmaceutical compounds, particularly TCH under visible and UV-light irradiation.

PVP encapsulated MXene coated on PET surface (PMP)-based photocatalytic materials: A novel photo-responsive assembly for the removal of tetracycline

Tetracycline (TC) antibiotic that is effective against wide-range micro-organisms, thereby used to control bacterial infection. The partial metabolism of TC antibiotics in humans and animals leads to the contamination of TC in the environments like water bodies. Thus, requirements to treat/remove/degrade TC antibiotics from the water bodies to control environmental pollution. In this context, this study focuses on fabricating PVP-MXene-PET (PMP) based photo-responsive materials to degrade TC antibiotics from the water. Initially, MXene (Ti2CTx) was synthesized using a simple etching process from the MAX phase (Ti3AlC2). The synthesized MXene was encapsulated using PVP and cast onto the surface of PET to fabricate PMP-based photo-responsive materials. The rough surface and micron/nano-sized pores within the PMP-based photo-responsive materials might be improved the photo-degradation of TC antibiotics. The synthesized PMP-based photo-responsive materials were tested against the photo-degradation of TC antibiotics. The band gap value of the MXene and PMP-based photo-responsive materials was calculated to be ∼1.23 and 1.67 eV. Incorporating PVP within the MXene increased the band gap value, which might be beneficial for the photo-degradation of TC, as the minimum band gap value should be ∼1.23 eV or more for photocatalytic application. The highest photo-degradation of ∼83% was achieved using PMP-based photo-degradation at 0.1 mg/L of TC. Furthermore, ∼99.71% of photo-degradation of TC antibiotics was accomplished at pH ∼10. Therefore, the fabricated PMP-based photo-responsive materials might be next-generation devices/materials that efficiently degrade TC antibiotics from the water.

Photo-Antibacterial Activity of Two-Dimensional (2D)-Based Hybrid Materials: Effective Treatment Strategy for Controlling Bacterial Infection

Bacterial contamination in water bodies is a severe scourge that affects human health and causes mortality and morbidity. Researchers continue to develop next-generation materials for controlling bacterial infections from water. Photo-antibacterial activity continues to gain the interest of researchers due to its adequate, rapid, and antibiotic-free process. Photo-antibacterial materials do not have any side effects and have a minimal chance of developing bacterial resistance due to their rapid efficacy. Photocatalytic two-dimensional nanomaterials (2D-NMs) have great potential for the control of bacterial infection due to their exceptional properties, such as high surface area, tunable band gap, specific structure, and tunable surface functional groups. Moreover, the optical and electric properties of 2D-NMs might be tuned by creating heterojunctions or by the doping of metals/carbon/polymers, subsequently enhancing their photo-antibacterial ability. This review article focuses on the synthesis of 2D-NM-based hybrid materials, the effect of dopants in 2D-NMs, and their photo-antibacterial application. We also discuss how we could improve photo-antibacterials by using different strategies and the role of artificial intelligence (AI) in the photocatalyst and in the degradation of pollutants. Finally, we discuss was of improving the photo-antibacterial activity of 2D-NMs, the toxicity mechanism, and their challenges.

Photo-degradation of sugar processing wastewater by copper doped bismuth oxyiodide: Assessment of treatment performance and kinetic studies

In this study, photo-Fenton-like oxidation method was evaluated for synthetic sugar industry wastewater using visible-light driven Cu-BiOI photocatalyst. Reaction conditions including initial pH, catalyst loading, initial hydrogen peroxide (H₂O₂) concentration, and temperature, were optimized. At these optimized conditions, the total saccharide concentration (TSC) and total organic carbon (TOC) removals were 56.20% and 30.67%, respectively whereas the maximum TSC and TOC removal reached up to 93.35% and 74.72% respectively by decreasing initial sucrose concentration. The kinetic study showed that the reaction order for sucrose and TOC oxidation was determined as 2 for pseudo-homogeneous power law models with respect to sucrose concentration and TOC, respectively.For heterogeneous models, Langmuir-Hinshelwood model based on the mechanism of adsorbed pollutant and oxidant on different catalytic sites was the best fit for oxidation of sucrose and other organic intermediates. According to the catalyst characterization studies, incorporation of copper was successful and Cu-BiOI possesses high photocatalytic activity accomplished by acid-assisted synthesis method.

A facile synthesis of CuBi2O4 hierarchical dumbbell-shaped nanorod cluster: a promising photocatalyst for the degradation of caffeic acid

The present study reports on the synthesis of Cu-bismuth oxide (CuBi2O4)-based nanorods by using a simple co-precipitation method for the photocatalytic degradation of caffeic acid (CA). The incorporation of Cu metal ions during the synthesis of CuBi2O4 nanorods might be advantageous to avoid the aggregation and control the leach out of metal ions. The calculated bandgap values of ~ 1.04, 1.02, and 0.94 eV were observed for CuBi2O4 with different amounts of Cu 1.0, 0.50, and 0.25 g, respectively. Varying the quantity of Cu metal ions easily tuned the bandgap value within the CuBi2O4-based nanorods. However, a further decrease in the bandgap value increased the recombination rate, and the less photocatalyst performance was observed. The CA degradation could be explained based on the species distribution. The CA pKa was mainly located between pKa1 and pKa2 of 4.43 and 8.6, respectively. The Cu within the CuBi2O4-based nanorods changed the electronic properties and the antibacterial ability. Therefore, the synthesized CuBi2O4-based nanorod cluster might be a promising material for the photocatalytic degradation of CA.

Strongly enhanced Fenton-like oxidation (Fe/peroxydisulfate) by BiOI under visible light irradiation: A novel and green strategy for Fe(III) reduction

In order to accelerate the photo-Fenton reaction process of Fe(III) under visible light irradiation, BiOI was introduced into the Fe(III)/peroxydisulfate (PDS) system. The catalytic oxidation performance of vis-light/BiOI/Fe(III)/PDS system was evaluated using bisphenol AF (BPAF) as a representative organic contaminant. Within 30 min, nearly 100% of BPAF was degraded, proving that the system had an excellent ability to degrade organic pollutants in water. Free radical quenching experiments, electron spin resonance (ESR), and molecular probing experiments determined that the main reactive species in the system were hydroxyl radicals (^•OH) and sulfate radicals (SO₄^•-). The comparative experiments showed that the degradation rates were closely related to the PDS consumption, while the Fe(II) absorbed on the surface of BiOI was responsible for the PDS consumption. The production pathway of Fe(II) was analyzed by XRD, FTIR and XPS characterization, the Fe(III) on the surface of BiOI was reduced by photogenerated electrons to generate Fe(II). The result confirmed that the reduction of Fe(III) by photogenerated electrons could effectively inhibit the recombination of electron-hole pairs, and accelerate the reduction progress of Fe(III)/Fe(II) cycle that was the rate-limiting step in PDS activation. Afterwards, a reliable mechanism for degradation of BPAF in visible light/BiOI/Fe(III)/PDS system was proposed. Finally, the influence of reactant dosages, visible light intensity, initial pH, humic acid (HA) and anions in the solution on the degradation of BPAF were discussed.

Synthesis of Cu-doped 2D-WS2 nanosheet-based nano-antibiotic materials for inhibiting E. Coli and S. aureus bacterial strains

A new class of nano-antibiotic materials must be developed to treat bacterial infectious diseases. In this context, the synthesizing Cu-metal incorporated WS2 nanosheet (Cu–WS2-NS)-based antibiotic materials might overcome such associated issues.

Promotion mechanism of -OH group intercalation for NOx purification on BiOI photocatalyst

Bismuth oxyiodide (BiOI) is a traditional layered oxide photocatalyst that performs in a wide visible-light absorption band, owing to its appropriate band structure. Nevertheless, its photocatalytic efficiency is immensely inhibited due to the serious recombination of photogenerated charge carriers. Herein, this great challenge is addressed via a new strategy of intralayer modification by -OH groups in BiOI, which leads to enhancement of the reactants' activation capacity to promote photocatalytic activity and generate more active species. Furthermore, analysis via a combination of experimental and theoretical methods revealed that the -OH group-functionalized samples reduce the energy barriers for conversion of the main intermediate (NO₂), which is easily transformed to NO₂^-, thus accelerating the oxidation of NO to the final product (NO₃^-). This study gives insight into NO oxidation, improving the photocatalytic efficiency, and mastering the photocatalysis reaction mechanism to curb air pollution.

Bimetal (Fe/Zn) doped BiOI photocatalyst: An effective photodegradation of tetracycline and bacteria

Tetracycline (TC) is one of the most commonly used broad-spectrum antibiotics to treat the bacterial infection. TC antibiotics enter into the environment because of partial metabolism in the humans and animals, thereby increasing the environmental toxicity. Therefore, it is highly needed to treat TC antibiotics from the water system. In this aspect, the present work focus on the synthesis of Fe and Zn (bimetal) incorporated with different concentrations into the bismuth-oxy-iodide (Fe/Zn-BiOI) based photocatalyst materials. The synthesized Fe/Zn-BiOI was tested against photocatalytic degradation of TC antibiotics and bacteria. The band gap value of the synthesized Fe/Zn-BiOI was calculated ~2.19 eV. The incorporation of the Fe and Zn metals within the BiOI aided advantages that increased the reactive sites, oxygen defects, photon adsorption, production of hydroxyl radicals, and decrease the recombination rate, thereby high photo-degradation ability. The maximum degradation of ~83% was observed using Fe/Zn-BiOI-1-1 at 10 mg/L of TC antibiotics concentration. Moreover, ~98% of degradation was observed at pH~10 of the TC antibiotics. The photo-activity against bacteria of the Fe/Zn-BiOI was also determined. The data suggested that the synthesized Fe/Zn-BiOI based photocatalyst materials effectively inhibited the bacterial strains. Therefore, Fe/Zn-BiOI based photocatalyst materials might be promising materials that effectively degrade TC antibiotics as well as bacteria.

A novel bimetallic (Fe/Bi)-povidone-iodine micro-flowers composite for photocatalytic and antibacterial applications

The present work describes the synthesis of polyvinylpyrrolidone (PVP) assisted Fe-BiOI based Fe/Bi-povidone‑iodine (Fe/Bi-P-I) micro-flowers based composite and its photocatalytic and antibacterial applications. The Fe/Bi-P-I micro-flowers-based composite material was synthesized using a simple co-precipitation method. The prepared Fe/Bi-P-I micro-flowers-based composite materials were characterized using various characterization techniques and tested against photocatalytic degradation of rhodamine B (RhB) dye and antibacterial analysis. The PVP or povidone‑iodine provides more exposure of reactive sites and oxygen vacancies, which leads to a high separation rate of photoinduced charge carriers, and migration, thereby 100% of photodegradation efficiency at 1 mg/L initial concentration of RhB dye towards the synthesized P-Fe-BiOI based micro-flowers composite. Interestingly, Povidone-Iodine in Fe/Bi-P-I micro-flowers-based composite might be advantageous for antimicrobial activity against both gram-negative (E. coli), and gram-positive (S. aureus) bacterial strains. Therefore, the prepared Fe/Bi-P-I micro-flowers-based composite improved both photocatalytic degradation of organic pollutants as well as high antimicrobial activity. The method of synthesizing the Bi/Fe-P-I micro flower composite in the present study is novel, facile, and economically viable.

Three-dimensional (3D) polymer-metal-carbon framework for efficient removal of chemical and biological contaminants

The continuously increased existence of contaminants such as chemical and biological mainly dye, bacteria, and heavy metals ions (HMI) in water bodies has increased environmental concern due to their hostile effects on living things. Therefore, there is necessity to be developed newer materials that skirmishes such environmental menace. The present works focus on the synthesis of a novel three-dimensional (3D) polymer-metal-carbon (3D-PMC) framework for the exclusion of contaminants (chemical and biological) from water bodies. Initially, polyurethane (PU) foam was treated with nitric acid and used as a framework for the development of 3D-PMC materials. The copper nanosheet (Cu-NS) was deposited onto the functionalized PU foam to produce Cu-NS-PU material. The mechanically exfoliated graphene was mixed with chitosan to produce a graphene-chitosan homogenous suspension. The produce homogenous suspension was deposited Cu-NS-PU for the development of the 3D-PMC framework. The prepared 3D-PMC framework was characterized by scanning electron microscopy (SEM), Energy Dispersive X-Ray Analysis (EDX), Fourier-transform infrared spectroscopy (FT-IR), and X-rays diffraction (XRD) analysis. The prepared 3D-PMC framework was subjected to various adsorption parameters to assess the sorption ability of the material. The prepared 3D-PMC framework was effectively used for the removal of chromium (Cr) metal ions and Congo-red (CR) dye from the water system. The synthesis of the 3D-PMC framework is simple, novel, cost-effective, and economically viable. Therefore, the prepared 3D-PMC framework has the potential to be used as a filter assembly in water treatment technologies.

A Zn-doped BiOI microsponge-based photocatalyst material for complete photodegradation of environmental contaminants

The present study describes Zn metal incorporation within BiOI microsponge structures for the photocatalytic degradation of tetracycline (TC) antibiotics.