Paper-based SERS swab for rapid trace detection on real-world surfaces

Plasmonic nanoparticle sensors: current progress, challenges, and future prospects

Plasmonic nanoparticles (NPs) have played a significant role in the evolution of modern nanoscience and nanotechnology in terms of colloidal synthesis, general understanding of nanocrystal growth mechanisms, and their impact in a wide range of applications. They exhibit strong visible colors due to localized surface plasmon resonance (LSPR) that depends on their size, shape, composition, and the surrounding dielectric environment. Under resonant excitation, the LSPR of plasmonic NPs leads to a strong field enhancement near their surfaces and thus enhances various light-matter interactions. These unique optical properties of plasmonic NPs have been used to design chemical and biological sensors. Over the last few decades, colloidal plasmonic NPs have been greatly exploited in sensing applications through LSPR shifts (colorimetry), surface-enhanced Raman scattering, surface-enhanced fluorescence, and chiroptical activity. Although colloidal plasmonic NPs have emerged at the forefront of nanobiosensors, there are still several important challenges to be addressed for the realization of plasmonic NP-based sensor kits for routine use in daily life. In this comprehensive review, researchers of different disciplines (colloidal and analytical chemistry, biology, physics, and medicine) have joined together to summarize the past, present, and future of plasmonic NP-based sensors in terms of different sensing platforms, understanding of the sensing mechanisms, different chemical and biological analytes, and the expected future technologies. This review is expected to guide the researchers currently working in this field and inspire future generations of scientists to join this compelling research field and its branches.

Molecularly Imprinted Wearable Sensor with Paper Microfluidics for Real-Time Sweat Biomarker Analysis

The urgent need for real-time and noninvasive monitoring of health-associated biochemical parameters has motivated the development of wearable sweat sensors. Existing electrochemical sensors show promise in real-time analysis of various chemical biomarkers. These sensors often rely on labels and redox probes to generate and amplify the signals for the detection and quantification of analytes with limited sensitivity. In this study, we introduce a molecularly imprinted polymer (MIP)-based biochemical sensor to quantify a molecular biomarker in sweat using electrochemical impedance spectroscopy, which eliminates the need for labels or redox probes. The molecularly imprinted biosensor can achieve sensitive and specific detection of cortisol at concentrations as low as 1 pM, 1000-fold lower than previously reported MIP cortisol sensors. We integrated multimodal electrochemical sensors with an iontophoresis sweat extraction module and paper microfluidics for real-time sweat analysis. Several parameters can be simultaneously quantified, including sweat volume, secretion rate, sodium ion, and cortisol concentration. Paper microfluidic modules not only quantify sweat volume and secretion rate but also facilitate continuous sweat analysis without user intervention. While we focus on cortisol sensing as a proof-of-concept, the molecularly imprinted wearable sensors can be extended to real-time detection of other biochemicals, such as protein biomarkers and therapeutic drugs.

Effect of wavelength and liquid on formation of Ag, Au, Ag/Au nanoparticles via picosecond laser ablation and SERS-based detection of DMMP

The present study investigates the effects of input wavelength (1064, 532, and 355 nm) and surrounding liquid environment (distilled water and aqueous NaCl solution) on the picosecond laser ablation on silver (Ag), gold (Au), and Ag/Au alloy targets. The efficacy of the laser ablation technique was meticulously evaluated by analyzing the ablation rates, surface plasmon resonance peak positions, and particle size distributions of the obtained colloids. The nanoparticles (NPs) were characterized using the techniques of UV-visible absorption, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. Furthermore, NPs of various sizes ranging from 6 to 35 nm were loaded onto a filter paper by a simple and effective drop-casting approach to achieve flexible surface-enhanced Raman spectroscopy (SERS) substrates/sensors. These substrates were tested using a simple, portable Raman device to identify various hazardous chemicals (malachite green, methyl salicylate, and thiram). The stability of the substrates was also systematically investigated by determining the decay percentages in the SERS signals over 60 days. The optimized SERS substrate was subsequently employed to detect chemical warfare agent (CWA) simulants such as methyl salicylate (a CWA simulant for sulfur mustard) and dimethyl methyl phosphonate (has some structural similarities to the G-series nerve agents) at different laser excitations (325, 532, and 633 nm). A notably higher SERS efficiency for CWA simulants was observed at a 325 nm Raman excitation. Our findings reveal that a higher ablation yield was observed at IR irradiation than those obtained at the other wavelengths. A size decrease of the NPs was noticed by changing the liquid environment to an electrolyte. These findings have significant implications for developing more efficient and stable SERS substrates for chemical detection applications.

Highly sensitive plasmonic paper substrate fabricated via amphiphilic polymer self-assembly in microdroplet for detection of emerging pharmaceutical pollutants

We report an innovative and facile approach to fabricating an ultrasensitive plasmonic paper substrate for surface-enhanced Raman spectroscopy (SERS). The approach exploits the self-assembling capability of poly(styrene-b-2-vinyl pyridine) block copolymers to form a thin film at the air-liquid interface within the single microdroplet scale for the first time and the subsequent in situ growth of silver nanoparticles (AgNPs). The concentration of the block copolymer was found to play an essential role in stabilizing the droplets during the mass transfer phase and formation of silver nanoparticles, thus influencing the SERS signals. SEM analysis of the morphology of the plasmonic paper substrates revealed the formation of spherical AgNPs evenly distributed across the surface of the formed copolymer film with a size distribution of 47.5 nm. The resultant enhancement factor was calculated to be 1.2 × 107, and the detection limit of rhodamine 6G was as low as 48.9 pM. The nanohybridized plasmonic paper was successfully applied to detect two emerging pollutants-sildenafil and flibanserin-with LODs as low as 1.48 nM and 3.45 nM, respectively. Thus, this study offers new prospects for designing an affordable and readily available, yet highly sensitive, paper-based SERS substrate with the potential for development as a lab-on-a-chip device.

Plasmonic filter paper for preconcentration, separation and SERS detection harmful chemicals in chili product by fluid flow

We proposed a triple functional SERS substrate by immobilized Ag nanoparticles on the surface of filter paper. The high dense Ag nanoparticles were distributed on the SERS substrate via in-situ growth process. By optimizing the parameter in preparation process, the optimal filter paper SERS substrate was fabricated by using 30 mM of AgNO3 with 20 S growth time. Due to capillary-effect wicking of cellulose fiber, the paper SERS substrate provide simple, fast and pump-free function for transferring analyte onto sharp tip through development of fluid. The fluid flow also brings target concentrate effect within the tip area. Furthermore, the separation feasibility was obtained during the development process of fluid. The preconcentrated effects not only enhanced the SERS signal of analyte, but also improve the fluorescence visible effect. The filter paper SERS substrate was successfully used for separating, concentrating and detecting Sudan dye from chili product, the detection limit could achieve 10-6 M. This study developed a portable, cost-effective and eco-friendly SERS substrate for separating and detecting trace chemical in food.

Silica monolayer isolation of electrodeposited SERS substrate and online probing of molecule adsorption onto mineral microparticles in relation to flotation

In the minerals processing industry, the surface chemistry of mineral particles and its real-time detection can significantly enhance process performance, and ultimately leading to automotive and intelligent control. The adsorption of collector molecule onto bulk mineral specimens could be investigated with the help of shell-isolated nanoparticle enhanced Raman spectroscopy (SHINERS). However, this method is unsuitable for the online detection of particles fluid consisted of micro-sized chalcocite that encountered in industrial production processes. In this work, a novel strategy of shell-isolated nanoparticles synthesis by electrodeposition of gold nanoparticles film and isolation of this film with crosslinked silica monolayer was proposed. The adsorption of 2-mercaptobenzothiazole (MBT), a typical flotation collector, onto a copper sulfide mineral, chalcocite was measured in-situ with the help of such a SERS substrate. Enhancement factors of 106-107 was calculated based on an idealized model. Furthermore, we discussed the stability of the silica isolation monolayer under high-power laser irradiation.

Paper-Based Flexible Nanoparticle Hybrid Substrate for Qualitative and Quantitative Analysis of Melamine in Powder Milk by SERS

Melamine is a chemical compound that is added to dairy products to increase the apparent protein content for higher profit margins. However, extended consumption of melamine can cause health risks. The SERS technique has proven to be an important tool for detecting small compounds, such as melamine. Here, a paper-based flexible nanoparticles (NPs)-hybrid SERS substrate was designed by drop-casting pegylated gold nanoparticles (AuNPs) on the filter papers. In SERS characterization, this substrate exhibited an enhancement factor of 108 and a limit of detection (LOD) as low as 10-8 M for Rhodamine 6G dye. Furthermore, we successfully utilized these substrates to detect the melamine spiked milk sample with an LOD as low as 0.01 ppm. This hybrid SERS substrate offers a low-cost, biocompatible, and easy-to-use fabrication for large-scale production, which may be widely used in food safety applications.

Surface-enhanced Raman scattering detection of thiram and ciprofloxacin using chitosan-silver coated paper substrates

Fast detection of contaminants of emerging concern (CECs) in water resources is of great environmental interest. Ideally, sustainable materials should be used in water quality monitoring technologies implemented for such purposes. In this regard, the application of bio-based materials aimed at the fabrication of analytical platforms has become of great importance. This research merges both endeavors by exploring the application of chitosan-coated paper, decorated with silver nanoparticles (AgNPs), on surface-enhanced Raman scattering (SERS) spectroscopy studies of two distinct types of CECs dissolved in aqueous samples: an antibiotic (ciprofloxacin) and a pesticide (thiram). Our results indicate the superior SERS performance of biocoated substrates compared to their non-coated paper counterparts. The detection limits achieved for thiram and ciprofloxacin using the biocoated substrates were 0.024 ppm and 7.7 ppm, respectively. The efficient detection of both analytes is interpreted in terms of the role of the biopolymer in promoting AgNPs assemblies that result in local regions of enhanced SERS activity. Taking advantage of these observations, we use confocal Raman microscopy to obtain Raman images of the substrates using ciprofloxacin and thiram as molecular probes. We also demonstrate that these biobased substrates can be promising for on-site analysis when used in conjunction with portable Raman instruments.

Paper-based substrates for surface-enhanced Raman spectroscopy sensing

Surface-enhanced Raman scattering (SERS) has been recognized as one of the most sensitive analytical methods by adsorbing the target of interest onto a plasmonic surface. Growing attention has been directed towards the fabrication of various substrates to broaden SERS applications. Among these, flexible SERS substrates, particularly paper-based ones, have gained popularity due to their easy-to-use features by full contact with the sample surface. Herein, we reviewed the latest advancements in flexible SERS substrates, with a focus on paper-based substrates. Firstly, it begins by introducing various methods for preparing paper-based substrates and highlights their advantages through several illustrative examples. Subsequently, we demonstrated the booming applications of these paper-based SERS substrates in abiotic and biological matrix detection, with particular emphasis on their potential application in clinical diagnosis. Finally, the prospects and challenges of paper-based SERS substrates in broader applications are discussed.

Modified paper-based substrates fabricated via electrostatic attraction of gold nanospheres for non-destructive detection of pesticides based on surface-enhanced Raman spectroscopy

BACKGROUND

Flexible surface-enhanced Raman spectroscopy (SERS) substrates such as paper-based substrates show great potential for rapid detection of residual chemicals on food surfaces. However, controlling the density and distribution of metallic nanoparticles adsorbed on the paper is still challenging.

RESULTS

The amount of gold (Au) nanospheres (51 ± 4 nm) attached on the filter paper modified with 3-aminopropyltriethoxysilane (APTES) was tunable, increasing as the level of APTES (2.5-15.0 g kg-1 ) applied for paper modification increased. Moreover, the Au nanospheres were relative evenly distributed on the filter paper modified with 2.5-10.0 g kg-1 of APTES, which resulted in excellent intra- and inter-reproducibility of SERS signals for pesticides including thiram, diquat dibromide, and paraquat dichloride (relative standard deviation = 2.2-10.1%). The modified paper-based substrate could be used to detect as low as 0.05-0.2 mg L-1 of pesticides in standard solutions, and as low as 5-20 ng cm-2 of residual pesticides on apple skins with minimum sample pretreatment.

CONCLUSION

This paper-based substrate with tunable feature for the density and distribution of nanoparticles is applicable for rapid SERS detection of residual pesticides in fruits and vegetables. © 2023 Society of Chemical Industry.

Designing of a functional paper-tip substrate for sensitive surface-enhanced Raman spectroscopy (SERS) detection

A simple and flexible fabrication method of paper SERS substrate was developed by nanoparticles (NPs) droplet self-assembly at the paper tip with a temperature gradient (PTTG). We turned the drawback of the coffee ring effect into an effective way of preparing paper SERS substrate. When the NPs droplets were continuously dripped onto the PTTG, NPs were densely and uniformly distributed at the paper-tip front based on the combination of gravity and the coffee ring effect, which could achieve 91.2-fold improvement of SERS performance compared to a flat filter paper. Meanwhile, the analytes could also be enriched at the paper-tip front, which could achieve 9.3-fold signal enhancement compared to the paper-tip tail. Thus, the PTTG realized an excellent signal amplification for SERS detection. The paper-tip SERS substrate combined with a portable Raman spectrometer yielded an excellent analytical enhancement factor of 1.15 × 105 with the detection limit of 10 nM Rhodamine 6G (R6G). The whole fabrication procedure was completed within 2 h, and the paper-tip substrate showed a satisfactory substrate-to-substrate reproducibility with a relative standard deviation (RSD) of 5.13% (n = 10). It was successfully applied for quantitatively detecting real samples of oxytetracycline and malachite green with recoveries of 83.84-105.25% (n = 3). Meanwhile, we further evaluated the SERS performance of the PTTG using a laboratory-based Raman spectrometer, and it could realize the detection as low as 10 pM R6G. The proposed paper-tip substrate would offer a promising potential application for the on-site SERS analysis of food safety and environmental health.

The Rise of Structurally Anisotropic Plasmonic Janus Gold Nanostars

Nanostructures intrinsically possessing two different structural or functional features, often called Janus nanoparticles, are emerging as a potential material for sensing, catalysis, and biomedical applications. Herein, we report the synthesis of plasmonic gold Janus nanostars (NSs) possessing a smooth concave pentagonal morphology with sharp tips and edges on one side and, contrastingly, a crumbled morphology on the other. The methodology reported herein for their synthesis - a single-step growth reaction - is different from any other Janus nanoparticle preparation involving either template-assisted growth or a masking technique. Interestingly, the coexistence of lower- and higher-index facets was found in these Janus NSs. The general paradigm for synthesizing gold Janus NSs was investigated by understanding the kinetic control mechanism with the combinatorial effect of all the reagents responsible for the structure. The optical properties of the Janus NSs were realized by corelating their extinction spectra with the simulated data. The size-dependent surface-enhanced Raman scattering (SERS) activity of these Janus NSs was studied with 1,4-BDT as the model analyte. Finite-difference time-domain simulations for differently sized particles revealed the distribution of electromagnetic hot-spots over the particles resulting in enhancement of the SERS signal in a size-dependent manner.

Plasmonic gold dogbone nanorattles sniff out trace molecules through surface enhanced Raman scattering

In this study, a highly sensitive and efficient surface-enhanced Raman spectroscopy (SERS) substrate was developed using Au dogbone nanorattles (Au-DBNRTs) deposited on a 3D wrinkled polymeric heat shrink film. The plasmonic structures of Au-DBNRTs, which possess a solid gold dogbone-shaped core and a thin, porous gold shell, and Au nanorod nanorattles (Au-NRNRTs), which have a rod-shaped core, were synthesized and their SERS performance was evaluated. Au-DBNRTs exhibited better Raman signal enhancement. The substrate was used to detect the pesticide thiabendazole with a limit of detection of up to 10-8 M. The unique optical properties and geometry of the Au-DBNRT nanoparticles, which have portruding corners in the vicinity of the metal shell, along with the shrinkage of the film after heat treatment, led to the creation of a 3D surface morphology, resulting in the generation of plasmonic electromagnetic hot spots. The fabricated substrate achieved an enhancement factor of 2.77 × 1010 for BDT, and the detection limit was 10-13 M. The current work offers a simple, cost-effective, and sensitive SERS substrate design that has great potential for sensing and detecting trace analytes.

Super-Radiant SERS Enhancement by Plasmonic Particle Gratings

Despite recent developments, surface-enhanced Raman spectroscopy (SERS) applications face challenges in achieving both high sensitivity and uniform Raman signals over a large area. Using the directional self-assembly of plasmonic nanoparticles in lattice structures, we show how one can increase the SERS signal 43-fold over randomly aligned gold nanoparticles without relying on the photoluminescence of Rhodamine 6G. For this study, we have chosen the lattice constant for an off-resonant case that matches the lattice resonance and super-radiant plasmon mode along the particle chain. Supported by electromagnetic simulations, we systematically analyze the radiative components of the plasmon modes by varying the particle size while keeping the lattice periodicity constant. We perform polarization-dependent SERS measurements and compare them with other standard SERS excitation wavelengths. Using the self-assembled plasmonic particle lattice, we have developed an effective SERS substrate that provides a significantly higher signal with 73% less surface coverage. This colloidal approach enables the cost-effective and scalable fabrication of highly sensitive, uniform, and polarization-dependent SERS substrates.

Rapid determination of thiram on apple using a flexible bacterial cellulose-based SERS substrate

A flexible nanocomposite composed of bacterial cellulose (BC) and gold nanoparticles (AuNPs) was developed as a SERS substrate to determine thiram on apple surface by two collection methods namely "paste-and-peel" and "wiping". Enhancement factor of this SERS substrate for sensing thiram residues was determined to be 2.8 × 10⁵. Compared to the benchtop Raman spectrometer, portable Raman spectroscopic device showed a lower sensitivity towards thiram residues with limit of detection at 0.98 ppm, satisfying maximum residue level of thiram on apple required by both Europe and America. A good linear correlation of SERS peak intensity at 1368 cm^-1 and different concentrations of thiram (1-50 ppm) revealed a coefficient up to 0.99. This flexible BC-based SERS substrate has a great analytical performance in sensitivity, reproducibility and stability, and is suitable for rapid detection (<8 min) and quantitative analysis of pesticides on food surface.

Plasmonic 3-D wrinkled polymeric shrink film-based SERS substrates for pesticide detection on real-world surfaces

The continuous and excessive use of agrochemicals for crop improvement and protection has raised widespread concern, as they exert adverse effects on human health and the local environment. Surface Enhanced Raman Spectroscopy (SERS) provides a method for the quick identification and detection of such hazardous substances in a short amount of time due to its properties of being robust, accurate, sensitive and non-destructive. Despite the fact that several SERS substrates have been developed, the bulk of them are ineffective in terms of sample collection or providing reproducible results. In this study, we showed that a 3-D wrinkled polymeric heat-shrink film coated with Au bead@Ag nanorods (silver nanorods) serves as a potential SERS substrate for trace analysis. The surface of the heat-shrink film became wrinkled after heating, and this, along with the spatial arrangement of nanoparticles, significantly enhances the Raman signal of the analytes. The fabricated SERS substrate was able to sense two model analytes 1,4-benzenedithiol (BDT) and 2-naphthalenethiol (NT) up to 10^-13 M and 10^-11 M concentrations. The fabricated substrate was also effective in sensing thiram down to 10^-13 M concentration. Additionally, the SERS substrate was applied in a real-world setting for the detection of the pesticide thiram spiked onto apple skin surfaces. To collect the thiram residues, the substrate was simply swabbed across the surface of the apple. This allowed for the detection of thiram at concentrations as low as 10^-9 M (1 ppb). The fabricated SERS substrate can thus detect analytes in an efficient, sensitive, dependable and accurate manner, allowing for the sensing of trace analytes like pesticides in a real-world environment.

Aerosol Jet Printed Surface-Enhanced Raman Substrates: Application for High-Sensitivity Detection of Perfluoroalkyl Substances

Printing technologies offer an attractive means for producing low-cost surface-enhanced Raman spectroscopy (SERS) substrates with high-throughput methods. The development of these substrates is especially important for field-deployable detection of environmental contaminants. Toward this end, we demonstrate SERS-based substrates fabricated through aerosol jet printing of silver nanoparticles and graphene inks on Kapton films. Our printed arrays exhibited measurable intensities for fluorescein and rhodamine dyes down to concentrations of 10^-7 M, with the highest SERS intensities obtained for four print passes of Ag nanoparticles. The substrates also exhibited an excellent shelf life, with little reduction in fluorescein intensities after 9 months of shelf storage. We also demonstrated the capability of our substrates to sense perfluoroalkyl substances (PFAS), the so-called forever chemicals that resist degradation due to their strong C-F bonds and persist in the environment. Interestingly, the addition of graphene to the Ag nanoparticles greatly enhanced the SERS intensity of the perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) molecules under basic conditions (pH ∼ 9) compared to that of fluorescein and rhodamine. We were able to successfully detect SERS spectra from nano- and picomolar (∼0.4 ppt) concentrations of PFOA and PFOS, respectively, demonstrating the viability of deploying our SERS sensors in the environment for the ultrasensitive detection of contaminants.

Ag Nanoparticles@Agar Gel as a 3D Flexible and Stable SERS Substrate with Ultrahigh Sensitivity

Flexible surface-enhanced Raman scattering (SERS) substrates have become one of the research hot spots due to the facile sampling by swabbing or wrapping on rough surfaces and the sensitive and nondestructive detection of contaminants. In this work, we proposed a simple and fast in situ reduction method to prepare Ag nanoparticles (Ag NPs) composited agar hydrogel (Ag NPs@Agar) flexible SERS substrate. Owing to the three-dimensional (3D) structure, good hydrophilicity and adsorption of the agar hydrogel, Ag NPs were grown uniformly in the 3D cross-linked structure. The distribution density of Ag NPs was further increased by the volume shrinkage when the hydrogel was dried in air. This high density and uniformly distribution of Ag NPs produced a large number of highly active SERS regions. In addition, the sensitivity of Ag NPs@Agar was further improved with the assistance of hydrophilic agar gel, which can trap the probe molecules into highly active SERS areas. The SERS results showed that the substrate can be used to detect dye molecules (rhodamine 6G), the minimum detectable concentration was 10^-15 M, the relative standard deviation tested at 18 different positions was only 7.58%, and the intensity of the characteristic peak at 611 cm^-1 decreased only about 10% after 49 days of storage, demonstrating the superior stability. Moreover, the Ag NPs@Agar substrate also could successfully achieve the micro-trace detection of melamine and sodium penicillin G in Xinjiang specialty camel milk powder. The above available results show that the prepared flexible Ag NPs@Agar SERS substrates possess potentials for the illegal additives and antibiotics in food safety analysis.

Plasmonic Nanostructures-Decorated ZIF-8-Derived Nanoporous Carbon for Surface-Enhanced Raman Scattering

Surface-enhanced Raman scattering (SERS) is considered to be a highly sensitive platform for chemical and biological sensing. Recently, owing to their high porosity and large surface area, metal-organic frameworks (MOFs) have attracted considerable attention in sensing applications. Porous carbon nanostructures are promising SERS substrates due to their strong broadband charge-transfer resonance and reproducible fabrication. Furthermore, an extraordinarily large enhancement of the electromagnetic field enables plasmonic nanomaterials to be ideal SERS substrates. Here, we demonstrate the porous Au@Ag nanostructure-decorated MOF-derived nanoporous carbon (NPC) for highly efficient SERS sensing. Specifically, this plasmonic nanomaterial-NPC composite offers high Raman signal enhancement with the ability to detect the model Raman reporter 2-naphthalenethiol (2-NT) at picomolar concentration levels.

Colloidal nanomaterials for water quality improvement and monitoring

Water is the most important resource for all kind forms of live. It is a vital resource distributed unequally across different regions of the globe, with populations already living with water scarcity, a situation that is spreading due to the impact of climate change. The reversal of this tendency and the mitigation of its disastrous consequences is a global challenge posed to Humanity, with the scientific community assuming a major obligation for providing solutions based on scientific knowledge. This article reviews literature concerning the development of nanomaterials for water purification technologies, including collaborative scientific research carried out in our laboratory (nanoLAB@UA) framed by the general activities carried out at the CICECO-Aveiro Institute of Materials. Our research carried out in this specific context has been mainly focused on the synthesis and surface chemical modification of nanomaterials, typically of a colloidal nature, as well as on the evaluation of the relevant properties that arise from the envisaged applications of the materials. As such, the research reviewed here has been guided along three thematic lines: 1) magnetic nanosorbents for water treatment technologies, namely by using biocomposites and graphite-like nanoplatelets; 2) nanocomposites for photocatalysis (e.g., TiO2/Fe3O4 and POM supported graphene oxide photocatalysts; photoactive membranes) and 3) nanostructured substrates for contaminant detection using surface enhanced Raman scattering (SERS), namely polymers loaded with Ag/Au colloids and magneto-plasmonic nanostructures. This research is motivated by the firm believe that these nanomaterials have potential for contributing to the solution of environmental problems and, conversely, will not be part of the problem. Therefore, assessment of the impact of nanoengineered materials on eco-systems is important and research in this area has also been developed by collaborative projects involving experts in nanotoxicity. The above topics are reviewed here by presenting a brief conceptual framework together with illustrative case studies, in some cases with original research results, mainly focusing on the chemistry of the nanomaterials investigated for target applications. Finally, near-future developments in this research area are put in perspective, forecasting realistic solutions for the application of colloidal nanoparticles in water cleaning technologies.

Bimetallic Gold Nanostars Having High Aspect Ratio Spikes for Sensitive Surface-Enhanced Raman Scattering Sensing

There has been increasing interest in evolution of plasmonic nanoplatforms based on noble metal nanoparticles to achieve ultrasensitive detection of trace analyte molecules through solution-based surface-enhanced Raman spectroscopy (SERS). This work presents a surfactant-free synthesis method of bimetallic gold nanostars coated with silver (BGNS-Ag) having sharp, high aspect-ratio spikes for achieving ultrahigh detection sensitivity and high reproducibility. Specifically, the unique BGNS-Ag platform combines both the strong SERS enhancement effects of gold nanostar sharp spikes and the high scattering feature of the silver-gold bimetallic structure. To achieve SERS reproducibility, this solution-based SERS measurement requires minimal sample preparation without addition of any external reagents, which can cause irregular aggregation of nanoparticles and reduce the reproducibility of SERS measurements. Moreover, we have streamlined our SERS sensing procedure by using standard well-plates and a portable Raman device for SERS measurements, which could be utilized for rapid on-site detection. This solution-based SERS performance was studied using methylene blue (MB) as a model analyte system. The detection limit of MB was as low as 42 pM, indicating high sensitivity of detection using BGNS-Ag. To illustrate the usefulness for environmental sensing, we showed that the SERS sensor can detect a pesticide, thiram, at a concentration as low as 0.8 nM. This study demonstrated that the BGNS-Ag system could serve as an effective and versatile plasmonic-active platform for reproducible, fast, and in-field detection of small organic analytes at trace levels.

In Situ Collection and Rapid Detection of Pathogenic Bacteria Using a Flexible SERS Platform Combined with a Portable Raman Spectrometer

This study aims to develop a simple, sensitive, low-cost, environmentally friendly and flexible surface-enhanced Raman scattering (SERS) platform, combined with a portable Raman spectrometer, for the rapid and on-site SERS detection of bacteria. Commercial tobacco packaging paper (TPP) with little background interference was used as a loading medium that effectively adsorbed Au nanoparticles and provided sufficient "hot spots". This Au-tobacco packaging paper (Au-TPP) substrate used as a flexible SERS platform can maximize sample collection by wiping irregular surfaces, and was successfully applied to the on-site and rapid detection of pathogenic bacteria. Raman fingerprints of pathogenic bacteria can be obtained by SERS detection of spiked pork using wipeable Au-TPP, which verifies its value in practical applications. The results collected by SERS were further verified by polymerase chain reaction (PCR) results. It showed several advantages in on-site SERS detection, including accurate discrimination, simple preparation, easy operation, good sensitivity, accuracy and reproducibility. This study indicates that the established flexible SERS platform has good practical applications in pathogenic bacterial identification and other rapid detections.

Picosecond Laser-Ablated Nanoparticles Loaded Filter Paper for SERS-Based Trace Detection of Thiram, 1,3,5-Trinitroperhydro-1,3,5-triazine (RDX), and Nile Blue

Recently, filter paper (FP)-based surface-enhanced Raman scattering (SERS) substrates have stimulated significant attention owing to their promising advantages such as being low-cost, easy to handle, and practically suitable for real-field applications in comparison to the solid-based substrates. Herein, a simple and versatile approach of laser-ablation in liquid for the fabrication of silver (Ag)-gold (Au) alloy nanoparticles (NPs). Next, the optimization of flexible base substrate (sandpaper, printing paper, and FP) and the FP the soaking time (5−60 min) was studied. Further, the optimized FP with 30 min-soaked SERS sensors were exploited to detect minuscule concentrations of pesticide (thiram-50 nM), dye (Nile blue-5 nM), and an explosive (RDX-1,3,5-Trinitroperhydro-1,3,5-triazine-100 nM) molecule. Interestingly, a prominent SERS effect was observed from the Au NPs exhibiting satisfactory reproducibility in the SERS signals over ~1 cm2 area for all of the molecules inspected with enhancement factors of ~105 and relative standard deviation values of <15%. Furthermore, traces of pesticide residues on the surface of a banana and RDX on the glass slide were swabbed with the optimized FP substrate and successfully recorded the SERS spectra using a portable Raman spectrometer. This signifies the great potential application of such low-cost, flexible substrates in the future real-life fields.

Fabrication of paper-based SERS substrate using a simple vacuum filtration system for pesticides detection

Herein, we describe a simple and cost-effective fabrication of a paper-based SERS substrate by coating poly(diallyldimethylammonium chloride) (PDADMAC) and gold nanostars (AuNSs) on the filter paper using a vacuum filtration system. The paper-based SERS substrates were fabricated and ready to be used within an hour without any complicated equipment or processes. The cationic polymer, PDADAMAC, was pretreated on the filter paper to improve the absorbability of negatively charged AuNSs through electrostatic interaction. The PDADMAC/AuNS paper significantly intensified the SERS signal of 4-mercaptobenzoic acid (4-MBA) compared to that of pure AuNS-coated paper due to the high density of AuNSs absorbed on the SERS substrate. The PDADMAC/AuNS paper substrate provided a SERS enhancement factor (EF) of 1.08 × 10⁷ with a low detection limit of 1 nM 4-MBA. The substrate shows excellent spot-to-spot reproducibility with a relative standard deviation (RSD) of 5.03%, and substrate-to-substrate reproducibility with an RSD of 3.20% for the Raman shift at 1080 cm^-1. The paper substrate was then applied for the rapid detection of pesticides with a low detection limit of 0.51 μM (0.13 ppm) for paraquat, and 0.38 μM (0.09 ppm) for thiram, using a handheld Raman spectrometer. The development of this simple and cost-effective paper-based SERS substrate, and its applications for on-site monitoring of pesticides, could be beneficial for food security and environmental safety.

Machine learning for rapid quantification of trace analyte molecules using SERS and flexible plasmonic paper substrates

Given the intrinsic nature of low reproducibility and signal blinking in the surface enhanced Raman scattering (SERS) technique, especially while detecting trace/ultra-trace amounts, it remains a major challenge to quantify the analyte under study. Here we present a simple and economically viable, flexible hydrophobic plasmonic filter paper-based SERS substrate for the quantification of two trace analytes [crystal violet (CV) and picric acid (PA)] using machine learning techniques and SERS data. The wettability of the substrate was modified with an easy and low-cost technique of coating it with silicone oil. Gold nanoparticles were synthesized using a femtosecond laser ablation in water technique. The prepared nanoparticles were characterized using UV, TEM, and SEM techniques and subsequently loaded onto filter papers before using them for SERS studies. We have considered the SERS intensities of the analytes at different concentrations with over 900 spectra to train the model. Principal component analysis (PCA) was used to reduce the dimensionality and, hence, the complexity of the model. Furthermore, support vector regression was used to quantify the analyte molecules and we achieved an R² error of 0.9629 for CV and 0.9472 for PA. In conjunction with a portable Raman spectrometer and a computation time of less than <10 s, we believe that this is an affordable and rapid method for quantification of analytes using the SERS technique.

Wearable plasmonic paper-based microfluidics for continuous sweat analysis

Wearable sweat sensors have the potential to provide clinically meaningful information associated with the health and disease states of individuals. Current sensors mainly rely on enzymes and antibodies as biorecognition elements to achieve specific quantification of metabolite and stress biomarkers in sweat. However, enzymes and antibodies are prone to degrade over time, compromising the sensor performance. Here, we introduce a wearable plasmonic paper-based microfluidic system for continuous and simultaneous quantitative analysis of sweat loss, sweat rate, and metabolites in sweat. Plasmonic sensors based on label-free surface-enhanced Raman spectroscopy (SERS) can provide chemical "fingerprint" information for analyte identification. We demonstrate the sensitive detection and quantification of uric acid in sweat at physiological and pathological concentrations. The well-defined flow characteristics of paper microfluidic devices enable accurate quantification of sweat loss and sweat rate. The wearable plasmonic device is soft, flexible, and stretchable, which can robustly interface with the skin without inducing chemical or physical irritation.

Facile synthesis of nanocellulose-based Cu2O/Ag heterostructure as a surface-enhanced Raman scattering substrate for trace dye detection

Semiconductor metal-oxide/metal heterostructures with synergetic properties have potential applications in photocatalysis and optical sensors. Here, Cu₂O sub-micro cubes were synthesized under environmentally benign conditions using 2, 2, 6, 6-tetramethylpyperdine-1-oxyl (TEMPO)-oxidized cellulose nanofibrils as a reducing and stabilizing agent. Then the surface of the Cu₂O cubes was decorated with silver nanoparticles (AgNPs) by a substitution reaction. The Cu₂O/Ag heterostructures within the cellulose nanofibrils (CNFs) network were employed as a promising surface-enhanced Raman scattering (SERS) assay for efficient sensing of methylene blue (MB), reaching a maximum enhancement factor (EF) of 4.0 × 10⁴. Their SERS intensities depended on the coverage density of AgNPs and the wavelength of the excitation laser. The excellent SERS performance may result from the charge transfer between Ag and Cu₂O molecules and the strong electromagnetic field at the interface. The CNF-Cu₂O/Ag substrates were capable of detecting MB dye down to 10^-8 M level with a relative standard deviation of 10-15%, demonstrating great sensitivity and reproducibility.

Palladium Nanoparticles Supported on Cellulosic Paper as Multifunctional Catalyst for Coupling and Hydrogenation Reactions

Hallmark of a successful catalyst is its high efficiency, economic aspects, operational simplicity, extensive reusability, higher environment friendliness, and potential use in multiple industrial applications. Herein, a facile protocol involving a catalyst with Pd nanoparticles supported on cellulose paper (also known as a "dip-catalyst") for the hydrogenation of a series of quinolines, nitroarene, and C-C bond formation reactions in most benign solvents such as water is described. The mere insertion/removal of the "dip-catalyst" strip enables instantaneous start/stop of the reaction, which enhances its reusability and ease of separation of products. Cellulose paper (CP) strips decorated with Pd nanoparticles (Pd/CP) are prepared by the reduction of K₂ PdCl₄ soaked strips using formic acid as reductant. The resulting spherical shaped Pd particles, confirmed by scanning electron microscopy, form stable catalysis centers on the support. XRD signature confirms the crystallinity of the Pd nanoparticles and the TEM images display 15-20 nm size particles uniformly decorating CP. X-ray photoelectron spectroscopy indicates the formation of metallic Pd. The catalyst is tested for the C-C bond formation reactions. Pd/CP catalyzed Suzuki-Miyaura coupling reaction demonstrate >99% conversion with optimum selectivity. On the other hand, Mizoroki-Heck reaction produced 87% conversion with the reaction of 4-methoxycarbonyl phenylboronic acid and iodobenzene in ethanol:water (1 : 1 v/v) using KOH as base. The developed Pd/CP construct produces >99% of the pyridine-ring hydrogenated product on quinoline hydrogenation using tetrahydroxydiboron (THDB) as the hydrogen source. Diverse and highly reducible functional groups were also evaluated for transfer hydrogenation, which demonstrates a high efficiency in terms of both reactivity and selectivity. The used catalysts are recyclable for the multiple cycles.

Surface Enhanced Raman Spectroscopy: Applications in Agriculture and Food Safety

Recent global warming has resulted in shifting of weather patterns and led to intensification of natural disasters and upsurges in pests and diseases. As a result, global food systems are under pressure and need adjustments to meet the change—often by pesticides. Unfortunately, such agrochemicals are harmful for humans and the environment, and consequently need to be monitored. Traditional detection methods currently used are time consuming in terms of sample preparation, are high cost, and devices are typically not portable. Recently, Surface Enhanced Raman Scattering (SERS) has emerged as an attractive candidate for rapid, high sensitivity and high selectivity detection of contaminants relevant to the food industry and environmental monitoring. In this review, the principles of SERS as well as recent SERS substrate fabrication methods are first discussed. Following this, their development and applications for agrifood safety is reviewed, with focus on detection of dye molecules, melamine in food products, and the detection of different classes of pesticides such as organophosphate and neonicotinoids.

Paper-based plasmonic substrates as surface-enhanced Raman scattering spectroscopy platforms for cell culture applications

The engineering of advanced materials capable of mimicking the cellular micro-environment while providing cells with physicochemical cues is central for cell culture applications. In this regard, paper meets key requirements in terms of biocompatibility, hydrophilicity, porosity, mechanical strength, ease of physicochemical modifications, cost, and ease of large-scale production, to be used as a scaffold material for biomedical applications. Most notably, paper has demonstrated the potential to become an attractive alternative to conventional biomaterials for creating two-dimensional (2D) and three-dimensional (3D) biomimetic cell culture models that mimic the features of in vivo tissue environments for improving our understanding of cell behavior (e.g. growth, cell migration, proliferation, differentiation and tumor metastasis) in their natural state. On the other hand, integration of plasmonic nanomaterials (e.g. gold nanoparticles) within the fibrous structure of paper opens the possibility to generate multifunctional scaffolds equipped with biosensing tools for monitoring different cell cues through physicochemical signals. Among different plasmonic based detection techniques, surface-enhanced Raman scattering (SERS) spectroscopy emerged as a highly specific and sensitive optical tool for its extraordinary sensitivity and the ability for multidimensional and accurate molecular identification. Thus, paper-based plasmonic substrates in combination with SERS optical detection represent a powerful future platform for monitoring cell cues during cell culture processes. To this end, in this review, we will describe the different methods for fabricating hybrid paper-plasmonic nanoparticle substrates and their use in combination with SERS spectroscopy for biosensing and, more specifically, in cell culture applications.

Charge Transfer on the Surface-Enhanced Raman Scattering of Ag/4-MBA/PEDOT:PSS System: Intermolecular Hydrogen Bonding

A sandwich-structured noble metal-probe molecule-organic semiconductor consisting of Ag nanoparticles (NPs), 4-mercaptobenzoic acid (4-MBA) and different concentrations of poly(styrenesulfonate:poly(3,4-ethylenedioxythiophene) (PEDOT:PSS) was prepared by layer-by-layer assembly. Intermolecular hydrogen bonding was observed to have a significant effect on the surface-enhanced Raman scattering (SERS) of Ag/4-MBA/PEDOT:PSS. Upon increasing the PEDOT:PSS concentration, the characteristic Raman band intensity of 4-MBA was enhanced. In addition, the selected b2 vibration mode was significantly enhanced due to the influence of the charge transfer (CT) mechanism. The CT degree (ρCT) of the composite system was calculated before and after doping with PEDOT:PSS; when the concentration of PEDOT:PSS was 0.8%, the SERS intensity tended to be stable, and ρCT reached a maximum. Compared with that of the undoped PEDOT:PSS system, ρCT was significantly enhanced after doping, which can be explained by the CT effect induced by hydrogen bonds. These results indicate that hydrogen bonding transfers a charge from the Fermi energy level of Ag to the lowest unoccupied molecular orbital (LUMO) of 4-MBA, and due to the resulting potential difference, the charge will continue to transfer to the LUMO of PEDOT:PSS. Therefore, the introduction of organic semiconductors into the field of SERS not only expands the SERS substrate scope, but also provides a new idea for exploring the SERS mechanism. In addition, the introduction of hydrogen bonds has become an important guide for the study of CT and the structure of composite systems.

Recent developments on gold nanostructures for surface enhanced Raman spectroscopy: Particle shape, substrates and analytical applications. A review

Surface enhanced Raman spectroscopy (SERS) is a powerful technique for sensitive analysis which is attracting great attention in the last decades. In this review, different gold nanostructures that have been exploited for SERS analysis are described, ranging from gold nanospheres to anisotropic and complex-shaped gold nanostructures, in which the presence of high aspect ratio features leads to an increment of the electromagnetic field at the surface of the nanomaterial, resulting in enhanced SERS response. In addition to the shape of the nanostructure, the interparticle nanogaps play a prominent role in the SERS efficiency. In this sense, different approaches such as nanoaggregation and formation of assemblies and ordered structures lead to the creation of the so-called hot spots. SERS measurements may be performed in solution, while usually the nanostructures are deposited building a SERS substrate, which can be created via attachment of chemically prepared gold nanostructures, as well as via top-down physical methods. Among the classical supports for creating the SERS substrates, in the last years there is a trend towards the development of flexible supports based on polymers as well as paper. Finally, some recent applications of gold nanostructures-based SERS substrates within the analytical field are discussed to spotlight the potential of this technique in real-world analytical scenarios.

Paper-Based Microfluidic Sensors for Onsite Environmental Detection: A Critical Review

A newly developed research topic, fabricated paper-based microfluidic sensors, was discussed in the field of low-cost environmental detection. Distinguished with the traditional dipstick or lateral-flow setups, these paper-based microfluidic sensors can serve as a tool for onsite quantitative and semi-quantitative measurements, without risks to cause environmental pollution. They have attracted increasing interest since the first easy-fabricated paper-based setup reported by Whitesides group in 2007. Most of the publications utilized paper-based sensors in clinical detection. In recent years, some groups started to use these sensors in environmental measurement, leading to precise, easy operation, low-cost, and eco-friendly methods for onsite detection. In this review, paper-based microfluidic sensors were briefly introduced, followed by literatures review and discussion for future perspectives.

Contrastive Study of In Situ Sensing and Swabbing Detection Based on SERS-Active Gold Nanobush-PDMS Hybrid Film

Surface-enhanced Raman scattering (SERS) with fast and intuitive property has been extensively utilized in the field of food safety. Here, we demonstrated a novel noble metal-polymer hybrid film as a SERS substrate for food fungicide analysis. Benefiting from its transparency and flexibility, poly(dimethylsiloxane) (PDMS) film was chosen as a versatile supporting matrix to grow gold nanobushes (Au NBs) through a seed-mediated process. The as-prepared AuNB-PDMS hybrid film performed satisfactorily in testing 4-nitrothiophenol (4NTP) and exhibited an enhancement factor (EF) of 2.56 × 10⁶. Moreover, the high sensitivity and elastic properties make the hybrid film a promising substrate in practical detection. Hence, the in situ sensing of TBZ, carbaryl, and their mixture was finally realized using the developed hybrid film, which exhibited higher sensitivity than that obtained by the swabbing method. This high-performance SERS substrate based on the flexible and transparent AuNB-PDMS hybrid film has great potential applications in the fast in situ monitoring of biochemical molecules.

Metal-Organic Frameworks for Preserving the Functionality of Plasmonic Nanosensors

Preserving the functionality of nanosensors is critical for their reliable performance under harsh environmental conditions. Biofunctionalized plasmonic nanostructures are an important class of bionanoconjugates for biosensing, bioimaging, and nanotherapeutics. Plasmonic nanostructures and biomolecules exhibit poor thermal stability over time. Here, we report a class of metal-organic framework, zeolitic imidazolate framework-8 (ZIF-8), as a protective coating for preserving plasmonic nanostructures and plasmonic bionanoconjugates at elevated temperature. Gold nanobipyramids (AuNBPs) with sharp tips are attractive plasmonic nanotransducers with high sensitivity but are prone to structural change and loss of sensitivity. This work reports the first observation that ZIF-8 can preserve the structure of AuNBPs and their corresponding strong electromagnetic field enhancement and high refractive index sensitivity. In addition, ZIF-8 coating enables nearly 100% retention of biorecognition capability of antibodies immobilized on the AuNBP surface after exposure to 60 °C for 48 h. The efficacy, versatility, and facile implementation of ZIF-8 coating offer great promise for the preservation of nanosensors.

Paper-based nanosensors to evaluate community-wide illicit drug use for wastewater-based epidemiology

Wastewater-based epidemiology (WBE) is a powerful technique for monitoring illicit drugs of abuse in the community. Here, we report upon a surface-enhanced Raman spectroscopy (SERS) sensor for the sensitive and selective detection of methamphetamine based upon the assembly of noble metal core-shell nanoparticles on a bespoke glassy nanofibrous electrospun paper matrix. The hierarchical structure of the fibrous paper, modified with the synthesized Au@Ag core-shells (Au@Ag) gave strong SERS signalling, enabling us to evaluate the community-wide prevalence of methamphetamine in wastewater treatment plants within Beijing. We show that, when normalized for the daily flow of the wastewater treatment plants and for population density, higher mass loads of drugs are generally found in sewage influent from urban areas, implying greater local methamphetamine usage than that in less populated areas. The user-friendly and disposable paper sensors demonstrate the applicability of rapid on-site illicit drug detection, illustrating the application to wastewater-based epidemiology, which has the potential to inform government agencies regarding societal interventions.

Application of Plasma-Printed Paper-Based SERS Substrate for Cocaine Detection

Surface-enhanced Raman spectroscopy (SERS) technology is an attractive method for the prompt and accurate on-site screening of illicit drugs. As portable Raman systems are available for on-site screening, the readiness of SERS technology for sensing applications is predominantly dependent on the accuracy, stability and cost-effectiveness of the SERS strip. An atmospheric-pressure plasma-assisted chemical deposition process that can deposit an even distribution of nanogold particles in a one-step process has been developed. The process was used to print a nanogold film on a paper-based substrate using a HAuCl₄ solution precursor. X-ray photoelectron spectroscopy (XPS) analysis demonstrates that the gold has been fully reduced and that subsequent plasma post-treatment decreases the carbon content of the film. Results for cocaine detection using this substrate were compared with two commercial SERS substrates, one based on nanogold on paper and the currently available best commercial SERS substrate based on an Ag pillar structure. A larger number of bands associated with cocaine was detected using the plasma-printed substrate than the commercial substrates across a range of cocaine concentrations from 1 to 5000 ng/mL. A detection limit as low as 1 ng/mL cocaine with high spatial uniformity was demonstrated with the plasma-printed substrate. It is shown that the plasma-printed substrate can be produced at a much lower cost than the price of the commercial substrate.

Electrochemical growth of dendritic silver nanostructures as facile SERS substrates

The well-defined silver dendritic nanostructure with a precisely tailored trunk and branches, as well as decorated nanoparticles.

Flexible, Reusable SERS Substrate Derived from ZIF-67 by Adjusting LUMO and HOMO and Its Application in Identification of Bacteria

Conventionally, surface-enhanced Raman spectroscopy (SERS)-active materials mainly include nanosized noble metals, semiconductors, or the complex of both, most of which are limited in practical applications because of their symbiotic materials, complex and difficult to control fabrication processes, and reuse and sampling challenges. To address these issues, novel SERS substrates have been developed in this study by anchoring zeolitic imidazolate framework-67 (ZIF-67) and derivatives of ZIF-67 to cotton fabric. The designed SERS substrates show extraordinary flexibility, an excellent enhancement factor, and reusable performance. By adjusting the lowest unoccupied molecular orbital and highest occupied molecular orbital of ZIF-67 through a doping process with different metal ions, the substrates exhibit a high enhancement factor of 6.07 × 10⁶ and a low limit of detection of 10^-8 M, as well as reusability resulting from photocatalysis. The enhancement process is studied based on charge transfer resonance, interband transition resonance, ground state charge transfer, and the light coupling effect. The results contribute to the approaches in designing SERS substrates by using ZIFs as unique SERS-active materials, and provide new insights into the development of novel SERS-active materials, along with promoting the use of SERS detection in the real world by improving the flexibility of substrates.

Polymer multilayers enabled stable and flexible Au@Ag nanoparticle array for nondestructive SERS detection of pesticide residues

The development of flexible and robust plasmonic substrates has become a hot research topic in simplifying and extending the application of surface-enhanced Raman scattering (SERS) technique for real-world analysis. In this work, a facile method to fabricate an Au@Ag nanoparticle array sandwiched between the adhesive acrylic polymer tape and polyethene terephthalate (PET) film (T/Au@Ag/PET) as a high-performance SERS chip was reported for nondestructive detection of thiram on fruit peels. For this SERS chip, the ordered Au@Ag nanoparticle array formed by the self-assembly method was closely-packed, which generated high-density sub-3-nm gaps and could produce high reproducible and sensitive SERS enhancement effects. The measurement of crystal violet with the limit of detection of 7.24 × 10^-10 M was realized by targeting Raman shift at 1177 cm^-1. Moreover, the excellent flexible feature of acrylic polymer tape enabled the substrate to withstand a tensile strain value of 20% for three cycles without significantly losing its SERS activity. By covering with a PET film, the SERS chip could maintain 87% SERS activity after storage for 60 days in the air environment, and could well withstand the influence of harsh conditions such as high temperature and ultrasound treatments. As a proof of the concept, the SERS tape was directly used to detect thiram on apple, tomato, and cucumber peels via a simple sampling-and-detection procedure, and the detection limit of 5 ng/cm² was achieved. The T/Au@Ag/PET SERS chip should hold a promising candidate for food safety analysis in the future.

Flexible SERS platform based on Ti3C2Tx-modified filter paper: preparation and SERS application

A novel, simple, and inexpensive flexible surface-enhanced Raman-scattering (SERS) platform based on common laboratory filter paper modified with Ti₃C₂T_x flakes was reported. Ti₃C₂T_x synthesized from a Ti₃AlC₂ phase with a mixture of HCl and LiF and Ti₃C₂T_x nanosheets were characterized by the TEM, XRD, UV-Vis spectrum, and Raman spectrum. Paper-based substrate has been proven to sample on rough and irregular surfaces. Thus, Ti₃C₂T_x was further manufactured as paper substrate by the immersion method to transfer nanosheets to filter paper. SERS activity of prepared substrate was demonstrated using R6G by the same filter paper modified with and without Ti₃C₂T_x, and various concentrations of R6G were tested to prove the sensitivity of the substrates. Further detection of CV and MG certified the universality of paper substrate based on Ti₃C₂T_x nanosheets for detection of organic pollutants. The uniformity and stability were proved by CV and R6G molecules. This SERS platform combines the advantages of 2D material and flexible paper scaffolds, resulting in a highly sensitive, cost-efficient, and easy-to-manufacture large-scale flexible substrate and is expected to be used in practice.

Multiple tier detection of TNT using curcumin functionalized silver nanoparticles

The rapid, selective and sensitive detection of trinitrotoluene (TNT), which is widely used in terrorist activities and also a major environmental contaminant is prime concern for the scientific community dealing with environmental problems and national security. This paper described unprecedented CAgP based multiple tier probe employing U.V.–Vis., DLS & SERS techniques for highly selective, rapid and ultrasensitive detection of TNT up to 0.1 nM level. The as synthesized CAgP made possible the naked eye detection of TNT in the form of flakes in real time. The developed method due to its multiple tier approach utilizing the same sample could easily be extended to a high-throughput format and can be utilized for rapid and reliable trace detection of TNT, for on-site screenings in airports, analysis of forensic samples, and environmental analysis.

∙

TNT can interact with curcumin functionalized Ag NPs through p-donor-acceptor interaction.

∙

Curcumin functionalized Ag NPs can be used as an ultrasensitive optical probe for TNT detection.

∙

The probe has an excellent selectivity for TNT against other nitro compounds.

∙

The probe can detect TNT at multiple levels using U.V–Vis., DLS and SERS.

Application of surface-enhanced Raman spectroscopy in fast detection of toxic and harmful substances in food

Surface-enhanced Raman spectroscopy (SERS) is being considered as a powerful technique in the area of food safety due to its rapidity, sensitivity, portability, and non-destructive features. This review aims to provide a comprehensive understanding of SERS applications in fast detection of toxic and harmful substances in food matrix. The enhancement mechanism of SERS, classification of active substrates, detection methods, and their advantages and disadvantages are briefly discussed in the review. The latest research progress of fast SERS detection of food-borne pathogens, mycotoxins, shellfish toxins, illegal food additives, and drug residues are highlighted in sections of the review. According to the current status of SERS detection of food-derived toxic and harmful substances, the review comes up with certain problems to be urgently resolved in SERS and brings up the perspectives on the future directions of SERS based biosensors.

Bioinspired One-Step Synthesis of Pomegranate-like Silica@Gold Nanoparticles with Surface-Enhanced Raman Scattering Activity

Gold-silica (Au-SiO₂) nanohybrids are of great technological importance, and it is crucial to develop facile synthetic protocols to prepare Au-SiO₂ nanohybrids with novel structures. Here we report the bioinspired synthesis of pomegranate-like SiO₂@Au nanoparticles (P-SiO₂@Au NPs) via one-step aqueous synthesis from chloroauric acid and tetraethyl orthosilicate mediated by a basic amino acid, arginine. Effects of chloroauric acid, tetraethyl orthosilicate, and arginine on the morphology and optical property of the products are investigated in detail. The P-SiO₂@Au NPs achieve tunable plasmon resonance depending on the amount of chloroauric acid, which affects the size and shape of the P-SiO₂@Au NPs. Finite-difference time-domain simulations are performed, revealing that the plasmon peak red-shifts with increasing particle size. Arginine serves as the reducing and capping agents for Au as well as the catalyst for SiO₂ formation and also promotes the combination of Au and SiO₂. Formation process of the P-SiO₂@Au NPs is clarified through time-course analysis. The P-SiO₂@Au NPs show good sensitivity for both colloidal and paper-based surface-enhanced Raman scattering measurements. They achieve enhancement factors of 4.3 × 10⁷-8.5 × 10⁷ and a mass detection limit of ca. 1 ng using thiophenol as the model analyte.