Adsorption of Polycyclic aromatic hydrocarbons (fluoranthene and anthracenemethanol) by functional graphene oxide and removal by pH and temperature-sensitive coagulation

Environmental applications and risks of engineered nanomaterials in removing petroleum oil in soil

Oil-contaminated soil posed serious threats to the ecosystems and human health. The unique and tunable properties of engineered nanomaterials (ENMs) enable new technologies for removing and repairing oil-contaminated soil. However, few studies systematically examined the linkage between the change of physicochemical properties and the removal efficiency and environmental functions (e.g., potential risk) of ENMs, which is vital for understanding the ENMs environmental sustainability and utilization as a safety product. Thus, this review briefly summarized the environmental applications of ENMs to removing petroleum oil from complex soil systems: Theoretical and practical fundamentals (e.g., excellent physicochemical properties, environmental stability, controlled release, and recycling technologies), and various ENMs (e.g., iron-based, carbon-based, and metal oxides nanomaterials) remediation case studies. Afterward, this review highlights the removing mechanism (e.g., adsorption, photocatalysis, oxidation/reduction, biodegradation) and the impact factor (e.g., nanomaterials species, natural organic matter, and soil matrix) of ENMs during the remediation process in soil ecosystems. Both positive and negative effects of ENMs on terrestrial organisms have been identified, which are mainly derived from their diverse physicochemical properties. In linking nanotechnology applications for repairing oil-contaminated soil back to the physical and chemical properties of ENMs, this critical review aims to raise the research attention on using ENMs as a fundamental guide or even tool to advance soil treatment technologies.

Accurate prediction bioaccessibility of PAHs in soil-earthworm system by novel magnetic solid phase extraction technique

Conventional chemical extraction methods may lead to overestimate or underestimate bioaccessibility due to their inability to provide realistic kinetic information regarding PAHs in soils. In this study, we propose the use of magnetic solid phase extraction (MSPE) technique for assessing the bioaccessibility of PAHs in the soil-earthworm system. Firstly, a novel polydopamine-coated magnetic core-shell microspheres (Fe3O4-C16@PDA) was developed by a one-pot sol-gel and self-polymerization method. The PDA coatings not only enhance the hydrophilicity of material surfaces but also exhibit excellent biocompatibility. The maximum adsorption capacity of Fe3O4-C16@PDA for 16 PAHs was 52.72 mg g-1, indicating that the proposed material fulfills the assessment requirements for highly contaminated soil. To compare the measurement of PAHs and their uptake by earthworms (Eisenia fetida), experiments were conducted using four different soils with varying properties. The desorption kinetics data obtained from these experiments demonstrated that the capability of the MSPE in accurately predicting the bioavailable portions of PAHs. After a 28-day exposure, the best predictor of bioavailable PAHs in earthworms was MSPE method exhibited the highest correlation coefficient (R2 > 0.90), and its slopes in the four soils were 0.972, 0.961, 1.012, and 0.962, respectively, all close to 1. These results demonstrate that the MSPE method successfully mimics the conditions encountered in soil-earthworm systems and effectively assess bioaccessibility of PAHs in soils.

Fluoranthene adsorption by graphene oxide and magnetic chitosan composite (mCS/GO)

The oil industry faces the challenge of reducing its high polluting potential, due to the presence of aromatic pollutants, such as polycyclic aromatic hydrocarbons (PAHs). Efforts have been made to mitigate the impact of PAHs in industry through the development of detection technologies and the implementation of mitigation strategies. This study presents the adsorption of fluoranthene, through a magnetic composite of graphene oxide and chitosan as a method of remediation of produced water. The efficiency of the process was evaluated through kinetic, equilibrium, thermodynamic, and characterization analyses. The nanocomposite was able to remove 90.9% of FLT after 60 min and showed a maximum adsorption capacity of 28.22 mg/g, demonstrating that they can be implemented to remove fluoranthene. Kinetic and equilibrium experimental data showed that physisorption is the predominant adsorptive mechanism; however, the process is also influenced by chemisorption, which occurs through electrostatic interactions between the surface of the material and the adsorbate. The thermodynamic study showed that fluoranthene and graphene composite have high affinity, and that the adsorption is exothermic and spontaneous. The results presented in this paper indicate that the magnetic composite is a potential and sustainable adsorbent for fluoranthene remediation.

Hazards of polycyclic aromatic hydrocarbons: a review on occurrence, detection, and role of green nanomaterials on the removal of PAH from the water environment

Organic pollutant contamination in the environment is a serious and dangerous issue, especially for developing countries. Among all organic pollutants, polycyclic aromatic hydrocarbons (PAHs) are the more frequently discovered ones in the environment. PAH contamination is caused chiefly by anthropogenic sources, such as the disposal of residential and industrial waste and automobile air emissions. They are gaining interest due to their environmental persistence, toxicity, and probable bioaccumulation. The existence of PAHs may result in damage to the environment and living things, and there is widespread concern about the acute and chronic threats posed by the release of these contaminants. The detection and elimination of PAHs from wastewater have been the focus of numerous technological developments during recent decades. The development of sensitive and economical monitoring systems for detecting these substances has attracted a lot of scientific attention. Using several nanomaterials and nanocomposites is a promising treatment option for the identification and elimination of PAHs in aquatic ecosystems. This review elaborated on the sources of origin, pathogenicity, and widespread occurrence of PAHs. In addition, the paper highlighted the use of nanomaterial-based sensors in detecting PAHs from contaminated sites and nanomaterial-based absorbents in PAH elimination from wastewater. This review also addresses the development of Graphene and Biofunctionalized nanomaterials for the elimination of PAHs from the contaminated sites.

Enhanced remediation of PAHs-contaminated site soil by bioaugmentation with graphene oxide immobilized bacterial pellets

Bioaugmentation is considered as a promising technology for cleanup of polycyclic aromatic hydrocarbons (PAHs) from contaminated site soil, however, available high-efficiency microbial agents remain very limited. Herein, we explored graphene oxide (GO)-immobilized bacterial pellets (JGOLB) by embedding high-efficiency degrading bacteria Paracoccus aminovorans HPD-2 in alginate-GO-Luria-Bertani medium (LB) composites. Microcosm culture experiments were performed with contaminated site soil to assess the effect of JGOLB on the removal of PAHs. The results showed that JGOLB exhibited greatly improved mechanical strength, larger specific surface area and more enriched mesopores, compared with traditional immobilized bacterial pellets. They significantly increased the removal rate of PAHs by 18.51% compared with traditional bacterial pellets, reaching the removal rate at 62.86% over 35 days of incubation. Moreover, the increase mainly focused on high-molecular-weight PAHs. JGOLB not only greatly increased the abundance of embedded degrading bacteria in soil, but also significantly enhanced the enrichment of potential indigenous degrading bacteria (Pseudarthrobacter and Arthrobacter), the functional genes involved in PAHs degradation and a number of ATP transport genes in the soil. Overall, such nanocomposite bacterial pellets provide a novel microbial immobilization option for remediating organic pollutants in harsh soil environment.

Adsorption of polycyclic aromatic hydrocarbons from wastewater using graphene-based nanomaterials synthesized by conventional chemistry and green synthesis: A critical review

Polycyclic aromatic hydrocarbons (PAHs) are organic pollutants formed mainly by the incomplete combustion of organic matter, such as oil, gas and coal. The presence of PAHs can cause irreparable damage to the environment and living beings, which has generated a global concern with the short and long term risks that the emission of these pollutants can cause. Many technologies have been developed in the last decades aiming at the identification and treatment of these compounds, mainly, the PAHs from wastewater. This review features an overview of studies on the main methods of PAHs remediation from wastewater, highlighting the adsorption processes, through the application of different adsorbent nanomaterials, with a main focus on graphene-based nanomaterials, synthesized by conventional and green routes. Batch and fixed-bed adsorptive processes were evaluated, as well as, the mechanisms associated with such processes, based on kinetic, equilibrium and thermodynamic studies. Based on the studies analyzed in this review, green nanomaterials showed higher efficiency in removing PAHs than the conventional nanomaterials. As perspectives for future research, the use of green nanomaterials has shown to be sustainable and promising for PAHs remediation, so that further studies are needed to overcome the possible challenges and limitations of green synthesis methodologies.

Micro-droplet Trapping and Manipulation: Understanding Aerosol Better for a Healthier Environment

Understanding the physicochemical properties and heterogeneous processes of aerosols is key not only to elucidate the impacts of aerosols on the atmosphere and humans but also to exploit their further applications, especially for a healthier environment. Experiments that allow for spatially control of single aerosol particles and investigations on the fundamental properties and heterogeneous chemistry at the single-particle level have flourished during the last few decades, and significant breakthroughs in recent years promise better control and novel applications aimed at resolving key issues in aerosol science. Here we propose graphene oxide (GO) aerosols as prototype aerosols containing polycyclic aromatic hydrocarbons, and GO can behave as two-dimensional surfactants which could modify the interfacial properties of aerosols. We describe the techniques of trapping single particles and furthermore the current status of the optical spectroscopy and chemistry of GO. The current applications of these single-particle trapping techniques are summarized and interesting future applications of GO aerosols are discussed.

Advances in water treatment technologies for removal of polycyclic aromatic hydrocarbons: Existing concepts, emerging trends, and future prospects

In the last two decades, environmental experts have focused on the development of several biological, chemical, physical, and thermal methods/technologies for remediation of PAH-polluted water. Some of the findings have been applied to field-scale treatment, while others have remained as prototypes and semi-pilot studies. Existing treatment options include extraction, chemical oxidation, bioremediation, photocatalytic degradation, and adsorption (employing adsorbents such as biomass derivatives, geosorbents, zeolites, mesoporous silica, polymers, nanocomposites, and graphene-based materials). Electrokinetic remediation, advanced phytoremediation, green nanoremediation, enhanced remediation using biocatalysts, and integrated approaches are still at the developmental stage and hold great potential. Water is an essential component of the ecosystem and highly susceptible to PAH contamination due to crude oil exploration and spillage, and improper municipal and industrial waste management, yet comprehensive reviews on PAH remediation are only available for contaminated soils, despite the several treatment methods developed for the remediation of PAH-polluted water. This review seeks to provide a comprehensive overview of existing and emerging methods/technologies, in order to bridge information gaps toward ensuring a green and sustainable remedial approach for PAH-contaminated aqueous systems. PRACTITIONER POINTS: Comprehensive review of existing and emerging technologies for remediation of PAH-polluted water. Factors influencing efficiency of various methods, challenges and merits were discussed. Green nano-adsorbents, nano-oxidants and bio/phytoremediation are desirous for ecofriendly and economical PAH remediation. Adoption of an integrated approach for the efficient and sustainable remediation of PAH-contaminated water is recommended.

Review on polycyclic aromatic hydrocarbons (PAHs) migration from wastewater

Rapidly increasing global population and increased civilization has increased burden on potable water resources and results in larger volumes of wastewater. Physical wastewater management techniques has advanced for domestic usage and commercial effluent new conceptions about imminent wastewater treatment have been acclaimed for highly carcinogenic polycyclic aromatic hydrocarbon (PAH) compounds. The present review study emphasis on the assessment of several accessible PAHs treatment methods used in wastewater management. The elementary principles, contextual remediation mechanisms and recent development in PAHs removal practices have also been precisely explained. The comprehensive information regarding sources, dispersal, classification, physicochemical properties, PAHs toxicity for humans and aquatics life, conventional treatment procedures, and advanced oxidation processes specified can assist us to identify the PAHs problem and their intensity. The performance evaluation of different removal techniques are discussed in details and found that highest PAHs' reduction for 5-or 6-ring (99%,) while 3-ring (79% reduction) with oxidant dose of 1.64 mL/L using titanium catalyst. In case of MWTPs, with secondary techniques, the average removal efficiency found in the range of 81.1-92.9% while for AOPs are 32-99.3%. Here, overall yield through AOPs most suitable if process used with some catalyst enhanced the yield as well and suitable for high ring as well as low ring PAHs. Among various processes, advanced oxidation and catalytic oxidation processes are the most valuable and promising techniques for PAHs removal. Based on the given evidences, the AOPs coupled with catalysts have been decided as the most competent design for wastewater PAHs treatment.

Adsorption of Polycyclic Aromatic Hydrocarbons from aqueous solution by Organic Montmorillonite Sodium Alginate Nanocomposites

The adsorption method is generally considered a promising technique to remove inorganic and organic contaminants in an economically and environmentally friendly superior manner. In this study, organic montmorillonite sodium alginate composites were prepared, in which, montmorillonite and cationic surfactant (cetyltrimethylammonium bromide, CTAB) in different added amounts were coagulated with sodium alginate using CaCl₂ as the crosslinking agent. The morphological properties of the composites were characterized thoroughly and employed in three typical target pollutants of polycyclic aromatic hydrocarbons (PAHs) (acenaphthene, fluorene, and phenanthrene) by batch adsorption experiments from aqueous solution. The composites provide an efficient alternative for PAHs removals. The composites could be stably separated and regenerated with methyl alcohol. Furthermore, the adsorption kinetic and isotherm data were well described by the Elovich kinetic and the Freundlich isotherm model, respectively. According to these, the adsorption process occurred via multilayer adsorption on the composite's energetically heterogeneous surface. Moreover, pore diffusion and hydrophobicity played a dominant role in the adsorption mechanism. Overall, our study offers a developed adsorbent that has the advantage of being recyclable, low cost, biodegradable and biocompatible for effectively removing PAHs from aqueous solution.

Synthesis of Active Graphene with Para-Ester on Cotton Fabrics for Antistatic Properties

The excellent electrical properties of graphene provide a new functional finishing idea for fabricating conductive cotton fabrics with antistatic properties. This work develops a novel method for synthesizing active graphene to make cotton fabrics conductive and to have antistatic properties. The graphite was oxidized to graphene oxide (GO) by the Hummers method, and was further acid chlorinated and reacted with the para-ester to form the active graphene (JZGO). JZGO was then applied to cotton fabrics and was bonded to the fiber surface under alkaline conditions. Characterizations were done using FT-IR, XRD and Raman spectroscopy, which indicated that the para-ester group was successfully introduced onto JZGO, which also effectively improved the water dispersibility and reactivity of the JZGO. Furthermore, this study found that the antistatic properties of the fabric were increased by more than 50% when JZGO was 3% by weight under low-humidity conditions. The washing durability of the fabrics was also evaluated.

Cation-π Interactions in Graphene-Containing Systems for Water Treatment and Beyond

Cation-π interactions are common in nature, especially in organisms. Their profound influences in chemistry, physics, and biology have been continuously investigated since they were discovered in 1981. However, the importance of cation-π interactions in materials science, regarding carbonaceous nanomaterials, has just been realized. The interplay between cations and delocalized polarizable π electrons of graphene would bring about significant changes to the intrinsic characteristics of graphene and greatly affect the device performance based on graphene and its derivatives. Here, the cation-π interactions in graphene containing systems for water treatment applications (e.g., separation membranes, adsorbents) are highlighted. The cross-linking effects caused by cation-π interactions contribute to membrane stability and selectivity and enhanced adsorption. Their roles in dominating the performance of graphene-based structures for other specific applications are also discussed. Relevant theoretical modeling and calculations are summarized to offer an in-depth understanding of the underlying mechanisms which can help in designing more functional materials and structures. Perspectives on the potential directions that deserve effort are also presented.

Promoting desert biocrust formation using aquatic cyanobacteria with the aid of MOF-based nanocomposite

Desertification and eutrophication are two global environmental problems human beings face. Inoculating cyanobacteria to form biocrusts is considered an effective technology to inhibit desertification. The main limitation of biocrust formation is the lack of propagules and nutrients in deserts. A possible low cost source of propagules and nutrients is eutrophic water containing aquatic cyanobacteria (AC), nitrogen and phosphorus. In this study, we fabricated a network-structured nanocomposite (designated as MC) using a metal-organic framework (MOF) and carboxymethyl cellulose (CMC). MC, with a large specific surface area and numerous surface groups, had a high retention capacity for water and nutrients and good biosafety. The combination of AC-containing water (ACW) and MC could provide a suitable microenvironment in the soil, promote the growth of desert cyanobacteria (DC), formation of biocrusts and inhibition of desertification. This study provides a novel approach to simultaneously relieve desertification and eutrophication.

Assembly and application advancement of organic-functionalized graphene-based materials: A review

Owing to the remarkable physicochemical properties such as hydrophobicity, conductivity, elasticity, and light weight, graphene-based materials have emerged as one of the most appealing carbon allotropes in materials science and chemical engineering. Unfortunately, pristine graphene materials lack functional groups for further modification, severely hindering their practical applications. To render graphene materials with special characters for different applications, graphene oxide or reduced graphene oxide has been functionalized with different organic agents and assembled together, via covalent binding and various noncovalent forces such as π-π interaction, electrostatic interaction, and hydrogen bonding. In this review, we briefly discuss the state-of-the-art synthetic strategies and properties of organic-functionalized graphene-based materials, and then, present the prospective applications of organic-functionalized graphene-based materials in sample preparation.

Fabrication of graphene oxide coated quartz filter paper for enhanced adsorption of particulate matter

Airborne particulate matter has become an emerging issue globally due to environmental degradation and the health risk it causes. Volatilization of weakly adsorbed particles onto quartz filter paper (QFP) limits its performance. The adsorption of particulate matter (PM₁₀) onto QFP coated with different concentrations of graphene oxide (GO) was investigated to enhance the adsorption potential. Hummer's method was adopted to synthesize GO. QFPs were coated with different concentrations of GO using a spin coating technique to optimize the result. The morphology and microstructure of GO-QFP were characterized by various experimental techniques, like XRD, FTIR, EDX, and SEM. GO showed considerable affinity to aerosol particles for GO-QFP weighing 5 mg/ml, whereas adsorption of the coated samples before and after was significantly reduced. The high affinity to aerosol particles was due to dominated π-π interactions and the grooved regions formed on the GO layer. It was considered that the high surface to volume ratio of GO-QFP improves the adsorptive property of the QF and consequently enhances the performance of the filter paper.

Theory and simulation developments of confined mass transport through graphene-based separation membranes

The perspectives of graphene-based membranes based on confined mass transport from simulations and experiments for water desalination.

Adsorption Behavior of Polycyclic Aromatic Hydrocarbons on Zn-Based Coordination Cluster Zn5: Competition, Synergy, and Mechanism

In this work, adsorption behaviors of pyrene (PYR), fluoranthene (FLT), phenanthrene (PHE), and fluorene (FLU) on the coordination cluster [Zn₅(H₂Lⁿ)₆](NO₃)₄]·8H₂O·2CH₃OH (Zn₅) were studied. The adsorption mechanism and spectrum analyses revealed that the synergistic effect of hydrophobic interaction, π-π stacking, and N-H···π interaction played a crucial role during the adsorption process. The maximum adsorption capacities of PYR, FLT, PHE, and FLU were 406.4, 399.7, 153.7, and 114.3 mg g^-1, respectively, resulting from the Langmuir isotherm model. Quick removal of PYR and FLT was found in kinetic experiments with the adsorption equilibrium being reached within 1 min. Competitive adsorption indicated that the adsorption sites for PYR, FLT, PHE, and FLU on Zn₅ were identical, and synergistic effects also existed in the adsorption process. Therefore, Zn₅ has the potential to be used as an adsorbent in the field of wastewater treatment.

Recent progress on carbon nanomaterials for the electrochemical detection and removal of environmental pollutants

Rapid global industrialization and explosive population growth have resulted in an increase in the discharge of harmful and toxic compounds. These toxic inorganic gases, volatile organic compounds, heavy metals, personal care products, endocrine-disrupting chemicals, dyes, and pharmaceuticals are destroying the balance in the Earth and increasing environmental toxicity at an alarming rate. Thus, their detection, adsorption and removal are of great significance. Various carbon nanomaterials including carbon nanotubes, graphene, mesoporous carbon, carbon dots, and boron-doped diamond have been extensively utilized and further proven to be ideal candidates for resolving environmental problems, emerging as adsorbents, electrochemical sensors and electrodes. Herein, we review the recent advances, progress and achievements in the design and properties of carbon nanomaterials and their applications for the electrochemical detection and removal of environmental pollutants.

Visible light-activated degradation of natural organic matter (NOM) using zinc-bismuth oxides-graphitic carbon nitride (ZBO-CN) photocatalyst: Mechanistic insights from EEM-PARAFAC

In this study, the complex degradation behavior of natural organic matter (NOM) was explored using photocatalytic oxidation systems with a novel catalyst based on a hybrid composite of zinc-bismuth oxides and g-C₃N₄ (ZBO-CN). The photooxidation system demonstrated the effective removal of NOM under low-intensity visible light irradiation, presenting removal rates of 53-74% and 65-88% on the basis of dissolved organic carbon (DOC) and the UV absorption coefficient (UV₂₅₄), respectively, at 1.5 g/L of the catalyst. The NOM removal showed an increasing trend with a higher ZBO-CN dose. Comparative experiments with the hole and OH radical scavengers revealed that the direct oxidation occurring on the catalyst's surface might be the governing photocatalytic mechanism. Fluorescence excitation emission matrix-parallel factor analysis (EEM-PARAFAC) revealed the individual removal behavior of the different constituents in bulk NOM. Different tendencies towards preferential adsorption and subsequent oxidative removal were found among dissimilar fluorescent components within a bulk terrestrial NOM, following the order of terrestrial humic-like (C1) > humic-like (C2) > microbial humic-like (C3) components. The result suggests the dominant operation of π-π and/or hydrophobic interactions between the NOM and the catalyst. The discriminative removal behavior was more pronounced in visible light versus UV-activated systems, probably due to the incapability of visible light to excite è - h⁺ pairs of ZnO and the triplet state of NOM. The high photoactivity and structural stability of ZBO-CN under visible light implies its potential for an effective, low-cost and energy-saving treatment technology to selectively remove large sized humic-like substances from water.

Cross-Linked Carbon Nanotube Adsorbents for Water Treatment: Tuning the Sorption Capacity through Chemical Functionalization

The development of carbon-based membrane adsorbent materials for water treatment has become a hot topic in recent years. Among them, carbon nanotubes (CNTs) are promising materials because of its large surface area, high aspect ratio, great chemical reactivity, and low cost. In this work, free-standing CNT adsorbents are fabricated from chemically cross-linked single-walled CNTs. We have demonstrated that by controlling the degree of cross-linking, the nanostructure, porous features, and specific surface area of the resulting materials can be tuned, in turn allowing the control of the adsorption capacities and the improvement of the adsorption performance. The cross-linked CNT adsorbents exhibit a notably selective sorption ability and good recyclability for removal of organics and oils from contaminated water.

Reduced Graphene Oxide-Hybridized Polymeric High-Internal Phase Emulsions for Highly Efficient Removal of Polycyclic Aromatic Hydrocarbons from Water Matrix

Reduced graphene oxide (RGO)-hybridized polymeric high-internal phase emulsions (RGO/polyHIPEs) with an open-cell structure and hydrophobicity have been successfully prepared using 2-ethylhexyl acrylate and ethylene glycol dimethacrylate as the monomer and the cross-linker, respectively. The adsorption mechanism and performance of this RGO/polyHIPEs to polycyclic aromatic hydrocarbons (PAHs) were investigated. Adsorption isotherms of PAHs on RGO/polyHIPEs show that the saturated adsorption capacity is 47.5 mg/g and the equilibrium time is 8 h. Cycling tests show that the adsorption capacity of RGO/polyHIPEs remains stable in 10 adsorption-desorption cycles without observable structure change in RGO/polyHIPEs. Moreover, the PAH residues in water samples after being purified by RGO/polyHIPEs are lower than the limit values in drinking water set by the European Food Safety Authority. These results demonstrate that the RGO/polyHIPEs have great potentiality in PAH removal and water purification.

Measurement of the surface hydrophobicity of engineered nanoparticles using an atomic force microscope

A scanning probe method based on atomic force microscopy (AFM) was used to probe the nanoscale hydrophobicity of nanomaterials in liquid environments.

Study of Graphene Oxide Structural Features for Catalytic, Antibacterial, Gas Sensing, and Metals Decontamination Environmental Applications

This study represents a comprehensive review about the structural features of graphene oxide (GO) and its significance in environmental applications. Two dimensional (2D) GO is tremendously focused in advanced carbon-based nanomaterials for environmental applications due to its tunable physicochemical characteristics. Herein, we report foundational structural models of GO and explore the chemical bonding of oxygen moieties, with graphite basal plane using various characterization tools. Moreover, the impact of these oxygen moieties and the morphology of GO for environmental applications such as removal of metal ions and catalytic, antibacterial, and gas sensing abilities have here been critically reviewed for the first time. Environmental applications of GO are highly significant because, in the recent era, the fast progress of industries, even in the countryside, results in air and water pollution. GO has been widely investigated by researchers to eradicate such environmental issues and for potential industrial and clinical applications due to its 2D structural features, large surface area, presence of oxygen moieties, nonconductive nature, intense mechanical strength, excellent water dispersibility, and tunable optoelectronic properties. Thence, particular emphasis is directed toward the modification of GO by varying the number of its oxygen functional groups and by coupling it with other exotic nanomaterials to induce unique properties in GO for potential environmental remediation purposes.

L-Lysine-grafted graphene oxide as an effective adsorbent for the removal of methylene blue and metal ions

In this paper, novel L-lysine-modified graphene oxide (Lys-GO) was synthesized through amidation. The morphological and structural properties of Lys-GO were characterized using infrared spectrometry, scanning electronic microscopy and X-ray photoelectron spectroscopy. The as-prepared Lys-GO material was systematically investigated in a series of batch adsorption experiments for the removal of methylene blue (MB) and copper ions (Cu²⁺) from wastewater. These results showed that Lys-GO is a bifunctional adsorbent for the removal of dyes and metal ions, and excellent adsorption efficiency was obtained. The maximum adsorption capacities for MB dye and Cu²⁺ were 1679.1 mg/g and 186.9 mg/g at 35 °C, respectively. The kinetics of adsorption followed well the linear pseudo-second-kinetic model. The isotherm results indicated that MB adsorption can be described with the Langmuir isotherm model, while the adsorption of Cu²⁺ can be described with the Freundlich model. The excellent adsorption capacity indicated that the Lys-GO may be a promising adsorption material for the removal of environmental pollutants.

Adsorption of organic contaminants by graphene nanosheets: A review

Graphene nanosheets (GNS) such as graphenes and graphene oxides (GOs) have been widely investigated as next-generation adsorbents in both water and wastewater treatment processes due to their unique physicochemical properties and their affinity towards different classes of organic contaminants (OCs). In the last five years, more than 40 articles investigating adsorption of different classes of OCs by graphene and GO were published in peer-reviewed journals. Adsorption mechanisms were controlled by molecular properties of OCs (e.g., aromatic vs aliphatic, molecular size and hydrophobicity), characteristics of adsorbents (e.g., surface area, pore size distribution, and surface functional groups), and background solution properties (e.g., pH, ionic strength, surfactants, NOM, and temperature). This literature survey includes: (i) a summary of adsorption of OCs by GNS, (ii) a comprehensive discussion of the mechanisms and factors controlling the adsorption of OCs by GNS and a comparison of their adsorption behaviors with those of CNT. This literature survey also identifies future research needs and challenges on the adsorption of OCs by GNS.

Separation and Sequential Recovery of Tetracycline and Cu(II) from Water Using Reusable Thermoresponsive Chitosan-Based Flocculant

Coexistence of antibiotics and heavy metals is typically detected in water containing both organic and inorganic contaminants. In this work, a flocculation method using a reusable thermoresponsive chitosan-based flocculant (CS-g-PNNPAM) was applied for separation and sequential recovery of tetracycline (TC) and Cu(II) from water. High synergistic removal rates of both TC and Cu(II) from water (>90%) were reached. Interactive effects among targeted water temperature (T₁), stock solution temperature (T₂), and flocculant dosage on flocculation performance were assessed using response surface methodology. To optimize flocculation, operation strategies of adjusting T₂ and dosage according to T₁ based on the interactive effects were given through mathematical analyses. The flocculation mechanism as well as interfacial interactions among CS-g-PNNPAM, TC, and Cu(II) were studied through experimental investigations (floc size monitoring, X-ray photoelectron spectroscopy, and UV spectra) and theoretical calculations (density functional theory and molecular dynamics simulations). Coordination of Cu(II) with TC and the flocculant promoted flocculation; switchable interactions (H bonds and hydrophobic association) of the TC-flocculant at different temperatures were key factors affecting operation strategies. When these interactions were weakened step by step, TC and Cu(II) were sequentially recovered from flocs using certain solutions. Meanwhile, the flocculant in flocs was regenerated and found reusable with high flocculation efficiency.

Coagulation Behavior of Graphene Oxide on Nanocrystallined Mg/Al Layered Double Hydroxides: Batch Experimental and Theoretical Calculation Study

Graphene oxide (GO) has attracted considerable attention because of its remarkable enhanced adsorption and multifunctional properties. However, the toxic properties of GO nanosheets released into the environment could lead to the instability of biological system. In aqueous phase, GO may interact with fine mineral particles, such as chloridion intercalated nanocrystallined Mg/Al layered double hydroxides (LDH-Cl) and nanocrystallined Mg/Al LDHs (LDH-CO3), which are considered as coagulant molecules for the coagulation and removal of GO from aqueous solutions. Herein the coagulation of GO on LDHs were studied as a function of solution pH, ionic strength, contact time, temperature and coagulant concentration. The presence of LDH-Cl and LDH-CO3 improved the coagulation of GO in solution efficiently, which was mainly attributed to the surface oxygen-containing functional groups of LDH-Cl and LDH-CO3 occupying the binding sites of GO. The coagulation of GO by LDH-Cl and LDH-CO3 was strongly dependent on pH and ionic strength. Results of theoretical DFT calculations indicated that the coagulation of GO on LDHs was energetically favored by electrostatic interactions and hydrogen bonds, which was further evidenced by FTIR and XPS analysis. By integrating the experimental results, it was clear that LDH-Cl could be potentially used as a cost-effective coagulant for the elimination of GO from aqueous solutions, which could efficiently decrease the potential toxicity of GO in the natural environment.

Heterogeneous adsorption behavior of landfill leachate on granular activated carbon revealed by fluorescence excitation emission matrix (EEM)-parallel factor analysis (PARAFAC)

Heterogeneous adsorption behavior of landfill leachate on granular activated carbon (GAC) was investigated by fluorescence excitation-emission matrix (EEM) combined with parallel factor analysis (PARAFAC). The equilibrium adsorption of two leachates on GAC was well described by simple Langmuir and Freundlich isotherm models. More nonlinear isotherm and a slower adsorption rate were found for the leachate with the higher values of specific UV absorbance and humification index, suggesting that the leachate containing more aromatic content and condensed structures might have less accessible sites of GAC surface and a lower degree of diffusive adsorption. Such differences in the adsorption behavior were found even within the bulk leachate as revealed by the dissimilarity in the isotherm and kinetic model parameters between two identified PARAFAC components. For both leachates, terrestrial humic-like fluorescence (C1) component, which is likely associated with relatively large sized and condensed aromatic structures, exhibited a higher isotherm nonlinearity and a slower kinetic rate for GAC adsorption than microbial humic-like (C2) component. Our results were consistent with size exclusion effects, a well-known GAC adsorption mechanism. This study demonstrated the promising benefit of using EEM-PARAFAC for GAC adsorption processes of landfill leachate through fast monitoring of the influent and treated leachate, which can provide valuable information on optimizing treatment processes and predicting further environmental impacts of the treated effluent.

Removal of copper ions from aqueous solutions via adsorption on carbon nanocomposites

The development of technologies for water purification is critical to meet the global challenges of insufficient water supply and inadequate sanitation. Among all wastewater treatments, adsorption is globally recognized as the most promising method because of its versatility and economic feasibility. Herein, the removal of copper ions (Cu(II)) from aqueous solutions through adsorption on free-standing hybrid papers comprised of a mixture between graphene and different types of carbon nanotubes (CNTs) was examined. Results indicate that the rate of adsorption and long-time capacity of the metal ions on the nanocomposites significantly exceeds that of activated carbon by a factor of 4. Moreover, the combination of graphene with CNTs endows an increase in the uptake of Cu(II) up to 50% compared to that of CNTs alone, with a maximum adsorption capacity higher than 250 mg·g(-1). The removal of Cu(II) from water is sensitive to solution pH, and the presence of oxygen functional groups on the adsorbent surface promotes higher adsorption rates and capacities than pristine materials. These hybrid nanostructures show great promise for environmental remediation efforts, wastewater treatments, and separation applications, and the results presented in this study have important implications for understanding the interactions of carbonaceous materials at environmental interfaces.

Investigation of adsorptive fractionation of humic acid on graphene oxide using fluorescence EEM-PARAFAC

In this study, the adsorptive fractionation of a humic acid (HA, Elliott soil humic acid) on graphene oxide (GO) was examined at pH 4 and 6 using absorption spectroscopy and fluorescence excitation-emission matrix (EEM)-parallel factor analysis (PARAFAC). The extent of the adsorption was greater at pH 4.0 than at pH 6.0. Aromatic molecules within the HA were preferentially adsorbed onto the GO surface, and the preferential adsorption was more pronounced at pH 6, which is above the zero point of charge of GO. A relative ratio of two PARAFAC humic-like components (ex/em maxima at 270/510 nm and at (250, 265)/440 nm) presented an increasing trend with larger sizes of ultrafiltered humic acid fractions, suggesting the potential for using fluorescence EEM-PARAFAC for tracking the changes in molecular sizes of aromatic HA molecules. The individual adsorption behaviors of the two humic-like components revealed that larger sized aromatic components within HA had a higher adsorption affinity and more nonlinear isotherms compared to smaller sized fractions. Our results demonstrated that adsorptive fractionation of HA occurred on the GO surface with respect to their aromaticity and the sizes, but the degree was highly dependent on solution pH as well as the amount of adsorbed HS (or available surface sites). The observed adsorption behaviors were reasonably explained by a combination of different mechanisms previously suggested.

PAMAM dendrimers and graphene: materials for removing aromatic contaminants from water

We present results from experiments and atomistic molecular dynamics simulations on the remediation of naphthalene by polyamidoamine (PAMAM) dendrimers and graphene oxide (GrO). Specifically, we investigate 3rd-6th generation (G3-G6) PAMAM dendrimers and GrO with different levels of oxidation. The work is motivated by the potential applications of these emerging nanomaterials in removing polycyclic aromatic hydrocarbon contaminants from water. Our experimental results indicate that GrO outperforms dendrimers in removing naphthalene from water. Molecular dynamics simulations suggest that the prominent factors driving naphthalene association to these seemingly disparate materials are similar. Interestingly, we find that cooperative interactions between the naphthalene molecules play a significant role in enhancing their association to the dendrimers and GrO. Our findings highlight that while selection of appropriate materials is important, the interactions between the contaminants themselves can also be important in governing the effectiveness of a given material. The combined use of experiments and molecular dynamics simulations allows us to comment on the possible factors resulting in better performance of GrO in removing polyaromatic contaminants from water.

Environmental applications of graphene-based nanomaterials

A critical assessment of recent developments in environmental applications of graphene and graphene-based materials.

The removal of fluoranthene by Agaricus bisporus immobilized in Ca-alginate modified by Lentinus edodes nanoparticles

Fruiting bodies of Agaricus bisporus (A. bisporus) were entrapped in Ca-alginate modified by Lentinus edodes nanoparticles (CA-LENP) to adsorb and biodegrade fluoranthene (FLU) efficiently from an aqueous solution in a fluidized bed bioreactor.

Synthesis and adsorption property of hydrophilic–hydrophobic macroporous crosslinked poly(methyl acryloyl diethylenetriamine)/poly(divinylbenzene) (PMADETA/PDVB) interpenetrating polymer networks (IPNs)

A novel hydrophilic–hydrophobic PMADETA/PDVB IPNs possesses a large equilibrium adsorption capacity to salicylic acid.

Graphene nanosheets as novel adsorbents in adsorption, preconcentration and removal of gases, organic compounds and metal ions

Due to their high adsorption capacities, carbon-based nanomaterials such as carbon nanotubes, activated carbons, fullerene and graphene are widely used as the currently most promising functional materials. Since its discovery in 2004, graphene has exhibited great potential in many technological fields, such as energy storage materials, supercapacitors, resonators, quantum dots, solar cells, electronics, and sensors. The large theoretical specific surface area of graphene nanosheets (2630 m(2)·g(-1)) makes them excellent candidates for adsorption technologies. Further, graphene nanosheets could be used as substrates for decorating the surfaces of nanoparticles, and the corresponding nanocomposites could be applied as novel adsorbents for the removal of low concentrated contaminants from aqueous solutions. Therefore, graphene nanosheets will challenge the current existing adsorbents, including other types of carbon-based nanomaterials.