Release of polyphenolic drugs from dynamically bonded layer-by-layer films

Electrogelated drug-embedded silk/gelatin/rGO degradable electrode for anti-inflammatory applications in brain-implant systems

Implantable electrodes have raised great interest over the last years with the increasing incidence of neurodegenerative disorders. For brain implant devices, some key factors resulting in the formation of glial scars, such as mechanical mismatch and acute injury-induced inflammation, should be considered for material design. Therefore, in this study, a new biocompatible flexible electrode (e-SgG) with arbitrary shapes on a positive electrode was developed via electrogelation by applying a direct electrical voltage on a silk fibroin/gelatin/reduced graphene oxide composite hydrogel. The implantable flexible e-SgG-2 film with 1.23% rGO content showed high Young's modulus (11-150 MPa), which was sufficient for penetration under dried conditions but subsequently became a biomimetic brain tissue with low Young's modulus (50-3200 kPa) after insertion in the brain. At the same time, an anti-inflammatory drug (DEX) incorporated into the e-SgG-2 film can be electrically stimulated to exhibit two-stage release to overcome tissue inflammation during cyclic voltammetry via degradation by applying an AC field. The results of cell response to the SF/gelatin/rGO/DEX composite film showed that the released DEX could interrupt astrocyte growth to reduce the inflammatory response but showed non-toxicity toward neurons, which demonstrated a great potential for the application of the biocompatible and degradable e-SgG-D electrodes in the improvement of nerve tissue repair.

A review of recent advances in biomedical applications of smart cellulose-based hydrogels

In biomedical engineering, smart materials act as media to communicate physiological signals inspired by environmentally responsive stimuli with outer indicators for timely scrutiny and precise therapy. Various physical and chemical processes are applied in the design of specific smart functions. Hydrogels are polymeric networks consisting of hydrophilic chains and chemical groups and they have contributed their unique features in biomedical application as one of the most used smart materials. Numerous raw materials can form hydrogels, in which cellulose and its derivatives have been extensively exploited in biomedicine due to their high hydrophilicity, availability, renewability, biodegradability, biocompatibility, and multifunctional reactivity. This review collates cellulose-based hydrogels and their extensive applications in the biomedical domain, specifically benefiting from the "SMART" concept in their design, synthesis and device assembly. The first section discusses the physical and chemical crosslinking and electrospinning techniques used in the fabrication of smart cellulose-based hydrogels. The second section describes the performance of these hydrogels, and the final section is a comprehensive discussion of their biomedical applications.

Delivering on the promise of recombinant silk-inspired proteins for drug delivery

Effective drug delivery is essential for the success of a medical treatment. Polymeric drug delivery systems (DDSs) are preferred over systemic administration of drugs due to their protection capacity, directed release, and reduced side effects. Among the numerous polymer sources, silks and recombinant silks have drawn significant attention over the past decade as DDSs. Native silk is produced from a variety of organisms, which are then used as sources or guides of genetic material for heterologous expression or engineered designs. Recombinant silks bear the outstanding properties of natural silk, such as processability in aqueous solution, self-assembly, drug loading capacity, drug stabilization/protection, and degradability, while incorporating specific properties beneficial for their success as DDS, such as monodispersity and tailored physicochemical properties. Moreover, the on-demand inclusion of sequences that customize the DDS for the specific application enhances efficiency. Often, inclusion of a drug into a DDS is achieved by simple mixing or diffusion and stabilized by non-specific molecular interactions; however, these interactions can be improved by the incorporation of drug-binding peptide sequences. In this review we provide an overview of native sources for silks and silk sequences, as well as the design and formulation of recombinant silk biomaterials as drug delivery systems in a variety of formats, such as films, hydrogels, porous sponges, or particles.

Amphiphilic sodium alginate-polylysine hydrogel with high antibacterial efficiency in a wide pH range

Bacterial infection is a major pathological factor leading to persistent wounds. With the aging of population, wound infection has gradually become a global health-issue. The wound site environment is complicated, and the pH changes dynamically during healing. Therefore, there is an urgent need for new antibacterial materials that can adapt to a wide pH range. To achieve this goal, we developed a thymol-oligomeric tannic acid/amphiphilic sodium alginate-polylysine hydrogel film, which exhibited excellent antibacterial efficacy in the pH range from 4 to 9, achieving the highest achievable 99.993 % (4.2 log units) and 99.62 % (2.4 log units) against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli, respectively. The hydrogel films exhibited excellent cytocompatibility, suggesting that the materials are promising as a novel wound healing material without the concern of biosafety.

Construction of single-injection vaccine using new time-controlled release system

Single-injection vaccines may overcome issues, such as high cost and poor patient compliance, of the multi-bolus regimes dominantly used in vaccination. However no such vaccine has been commercialized because time-controlled release, an unconventional release kinetics, is difficult to achieve. Here a new time-controlled release system using dynamic layer-by-layer (LBL) film as erodible coating was used to design single-injection vaccine. Unlike commonly used degradable polymers, dynamic LBL film disintegrates at a constant rate, thus allowing distinct pulsatile release of antigen at predetermined intervals. The release pattern of the single-injection vaccine mimics closely to that of ordinary multi-dose regimes. It elicits both humoral and cellular immune responses which are comparable to or even stronger than the corresponding multi-dose regime. In addition, it inhibits tumor growth more effectively. The new vaccine will not only improve patient compliance but also therapeutic outcome.

Integrating Antioxidant Functionality into Polymer Materials: Fundamentals, Strategies, and Applications

While antioxidants are widely known as natural components of healthy food and drinks or as additives to commercial polymer materials to prevent their degradation, recent years have seen increasing interest in enhancing the antioxidant functionality of newly developed polymer materials and coatings. This paper provides a critical overview and comparative analysis of multiple ways of integrating antioxidants within diverse polymer materials, including bulk films, electrospun fibers, and self-assembled coatings. Polyphenolic antioxidant moieties with varied molecular architecture are in the focus of this Review, because of their abundance, nontoxic nature, and potent antioxidant activity. Polymer materials with integrated polyphenolic functionality offer opportunities and challenges that span from the fundamentals to their applications. In addition to the traditional blending of antioxidants with polymer materials, developments in surface grafting and assembly via noncovalent interaction for controlling localization versus migration of antioxidant molecules are discussed. The versatile chemistry of polyphenolic antioxidants offers numerous possibilities for programmed inclusion of these molecules in polymer materials using not only van der Waals interactions or covalent tethering to polymers, but also via their hydrogen-bonding assembly with neutral molecules. An understanding and rational use of interactions of polyphenol moieties with surrounding molecules can enable precise control of concentration and retention versus delivery rate of antioxidants in polymer materials that are critical in food packaging, biomedical, and environmental applications.

Tannic acid/Sr2+-coated silk/graphene oxide-based meniscus scaffold with anti-inflammatory and anti-ROS functions for cartilage protection and delaying osteoarthritis

Tissue engineering method provides a promising solution for meniscus repair and regeneration. However, the inflammatory environment that persists after meniscus injury in the knee joint impedes meniscus tissue regeneration. The purpose of this study was to investigate the applicability of silk/graphene oxide (GO)-based meniscus scaffold modified with tannic acid (TA)/Sr²⁺ coating for the elimination of inflammatory cytokines and reactive oxygen species (ROS) under osteoarthritis (OA) environment along with cartilage protection by using a rat model. The self-assembled coating composed of a series of TA-Sr²⁺ complex concentrations was formed by a facile, rapid, and efficient method on the scaffold. The phenolic hydroxyl groups on the coating endowed the meniscus scaffold with excellent anti-inflammatory and ROS scavenging capacities. We also found that the coating could promote cell migration in a mock wound model and could increase extracellular matrix secretion in vitro. Moreover, the coating components at a certain concentration played an effective role in delaying OA and providing cartilage protection in the rat model. The expression of inflammation cytokines (e.g., IL-6, IL-8, and MMPs) in rat knee tissue was significantly downregulated, and cartilage degeneration and OA damage were also inhibited according to tissue staining results and the OARSI (Osteoarthritis Research Society International) scoring system. Combining these performances, we suggest that this silk/GO-based scaffold modified with TA/Sr²⁺ coating could have broader application prospects by virtue of its effective and user-friendly properties. STATEMENT OF SIGNIFICANCE: The biological properties of the meniscus play a role in activating and regulating the metabolic and inflammatory responses that influence the homeostasis of joint health and ultimately lead to knee osteoarthritis (OA). The inflammation condition of the knee joint may exacerbate the degeneration of meniscus and cartilage. The present study aimed to develop a functional coating composed of tannic acid/Sr²⁺ complex on a silk/graphene oxide-based meniscus scaffold and to endow the scaffold with anti-inflammatory and ROS elimination capacities during the meniscus regeneration process to protect cartilage and delay OA development. The in vitro cytocompatibility study and the in vivo rat OA model study revealed that the coating was effective in promoting cell migration, facilitating ECM secretion, inhibiting inflammation, and delaying OA development.

Fortification of edible films with bioactive agents: a review of their formation, properties, and application in food preservation

Biodegradable films constructed from food ingredients are being developed for food coating and packaging applications to create more sustainable and environmentally friendly alternatives to plastics and other synthetic film-forming materials. In particular, there is a focus on the creation of active packaging materials from natural ingredients, especially plant-based ones. The film matrix is typically constructed from film-forming food components, such as proteins, polysaccharides and lipids. These matrices can be fortified with active ingredients, such as antioxidants and antimicrobials, so as to enhance their functional properties. Edible active films must be carefully designed to have the required optical, mechanical, barrier, and preservative properties needed for commercial applications. This review focuses on the fabrication, properties, and functional performance of edible films constructed from natural active ingredients. It provides an overview of the type of active ingredients that can be used, how they interact with the film matrix, how they migrate through the films, and how they are released. It also discusses the potential application of these active films for food preservation. Finally, future trends are highlighted and areas where further research are required are discussed.

Medical Applications Based on Supramolecular Self-Assembled Materials From Tannic Acid

Polyphenol, characterized by various phenolic rings in the chemical structure and an abundance in nature, can be extracted from vegetables, grains, chocolates, fruits, tea, legumes, and seeds, among other sources. Tannic acid (TA), a classical polyphenol with a specific chemical structure, has been widely used in biomedicine because of its outstanding biocompatibility and antibacterial and antioxidant properties. TA has tunable interactions with various materials that are widely distributed in the body, such as proteins, polysaccharides, and glycoproteins, through multimodes including hydrogen bonding, hydrophobic interactions, and charge interactions, assisting TA as important building blocks in the supramolecular self-assembled materials. This review summarizes the recent immense progress in supramolecular self-assembled materials using TA as building blocks to generate different materials such as hydrogels, nanoparticles/microparticles, hollow capsules, and coating films, with enormous potential medical applications including drug delivery, tumor diagnosis and treatment, bone tissue engineering, biofunctional membrane material, and the treatment of certain diseases. Furthermore, we discuss the challenges and developmental prospects of supramolecular self-assembly nanomaterials based on TA.

Hydrogen-Bonded Films for Zero-Order Release of Leuprolide

Leuprolide has been widely used in androgen deprivation therapy for the treatment of advanced prostate cancer, but its use is still limited due to its short half-life. Herein, hydrogen-bonded layer-by-layer films are fabricated from PEGylated leuprolide (PEG-LEU) and tannic acid (TA). Because of its dynamic nature, the film disintegrates gradually in water and releases PEG-LEU and TA. The in vitro release profile indicated perfect zero-order kinetics, which is explained by the unique release mechanism. When implanted subcutaneously in male rats, the films maintain a constant serum drug level. For a 60-bilayer film, the serum drug level is maintained constant for ≈24 days. No initial burst release is observed, suggesting that the in vivo release also follows zero-order kinetics. Initially, an increase in the level of serum testosterone is induced by the released drug, followed by testosterone suppression to a constant level below the castrate level, which could be maintained as long as a constant serum drug level is maintained. Since the new drug carriers avoid an initial burst release of the drug and maintain a constant serum drug level and hence a constant serum testosterone level below the castrate level, these carriers are highly promising for androgen deprivation therapy.

(-)-Epigallocatechin-3-gallate encapsulated realgar nanoparticles exhibit enhanced anticancer therapeutic efficacy against acute promyelocytic leukemia

Realgar and (-)-Epigallocatechin-3-gallate (EGCG) are natural medicines that inhibit cancer cell growth, resulting in inhibition of formation and development of tumors. The anticancer effects of realgar and EGCG were greatly improved following formulation as nanoparticles. EGCG has received increased attention as a drug carrier. The aim of this study was to prepare a new nanomedicine, (EGCG-RNPs), in which encapsulated nano-realgar. EGCG-RNPs were prepared by coprecipitation and characterized by transmission electron microscopy (TEM), differential scanning calorimetry (DSC), particle size and zeta potential, X-ray diffraction, Fourier transform infrared spectroscopy (FTIR) and in vitro release. Furthermore, we evaluated the antiproliferative effects of EGCG-RNPs on HL-60 cells in vitro, antitumor effect by intratumoral injection of EGCG-RNPs into solid tumors derived from APL HL-60 cells in vivo. Possible mechanisms were evaluated using uptake and efflux experiments in HL-60 cells. The results showed that the average particle size and zeta potentials of EGCG-RNPs was 200.3 ± 1.23 nm and −46.8 ± 1.31 mV. Controlled release of EGCG-RNPs was sustained and continued up to 72 h in vitro. Compared with nano-realgar and EGCG + RNPs (EGCG and nano-realgar physical mixing), EGCG-RNPs significantly inhibited growth of HL-60 cells. In a solid tumor model, EGCG-RNPs decreased tumor volumes, with an inhibitory rate of 60.18% at a dose of 70 mg · kg⁻¹. The mechanisms of antitumor improvement may correlate with the increased uptake of realgar and prolonged the retention time of realgar in HL-60 cells due to EGCG as a carrier. EGCG-RNPs could enhance anticancer therapeutic efficacy for acute promyelocytic leukemia.

A sustained zero-order release carrier for long-acting, peakless basal insulin therapy

A new drug carrier, which mimics physiologic basal insulin, and secretes and releases insulin at a constant rate, was designed.

Multicompartmental Mesoporous Silica/Polymer Nanostructured Hybrids: Design Capabilities by Integrating Linear and Star-Shaped Block Copolymers

Poly(2-vinyl pyridine)-b-poly(ethylene oxide) (P2VP-b-PEO) linear diblock copolymer and polystyrene-poly(ethylene oxide) (PS10PEO10) heteroarm star copolymer were used as building elements to prepare organic-inorganic hybrids. By using the layer-by-layer (LbL) methodology, these elements were integrated on mesoporous silica through non-covalent interactions, namely, ionic and H-bonding. For the latter, tannic acid (TA) was used as an intermediate layer. The deposition of the various layers was monitored by thermogravimetric analysis (TGA), electrophoretic measurements, and confocal microscopy. The final silica hybrid, bearing alternating P2VP-b-PEO and PS10PEO10 star layers was capable of carrying one hydrophilic and two hydrophobic chemical species in distinct compartments. These multicompartmental organic-inorganic hybrids could be used as nanostructured carriers for pH-responsive multiple drug delivery and potential theranostic applications.

Supramolecular design and applications of polyphenol-based architecture: A review

Polyphenol-based materials are of wide-spread interest because of the unique properties of the polyphenol itself. Tannic acid, contains high level of galloyl groups, could be coordinated to a range of metal ions to generate robust mental ion-TA films on substrate or even forming hollow capsules. These films or capsules can be used in the field of sensing, separation and catalysis, most importantly in drug/nutraceutical delivery, allowing for the high loading efficiency, high mechanical and thermal stability, pH-responsive disassembly and fluorescence behavior. Additionally, such coating could also provide protection of the sensitive molecules and cells. With the numerous carbonyl and phenolic functional groups, TA has also been demonstrated to form strong hydrogen bonded multilayers with various non-ionic polymers. The properties of the hydrogen-bonded system were highly influenced by the chemical structure of the polymers, which will change the behavior of pH-, temperature- or ionic strength-responsive release of the loading molecules. Additionally, the ionization of galloyl phenol group was attributed to the interaction between TA and other ionic polymers by electrostatic interaction. The electrostatic interaction/hydrogen bonding derived TA/polyme$$%r complexes could deposit on glass slides, microcores or even forming hollow capsules, promising in their applicability to nutraceutical encapsulation, delivery and depot. Notably, polyphenols self-polymerizing could also deposit coatings on different substrates without any exogenous additives, while the comprehensive undertanding about the self-polymerizing mechenism remains unclear. This review provides a promising prospect for utilizing polyphenol-based materials to design versatile architecture in different system, used in the field of chemistry and materials science.

Self-Assembled Polyvinyl Alcohol-Tannic Acid Hydrogels with Diverse Microstructures and Good Mechanical Properties

Fabrication of hydrogels with unique microstructures and better mechanical properties through the self-assembly of commercially available synthetic polymers and small molecules is of great scientific and practical importance. A type of physical hydrogels is prepared by the self-assembly of polyvinyl alcohol (PVA) and tannic acid (TA) in aqueous solution with a low PVA-TA concentration (0.5-6.0 wt %) at room temperature. With the increase of the PVA-TA concentration, the water content of the hydrogels increases, and the content of TA in the hydrogels decreases from 23.1 to 6.4%. The driving force for the self-assembly is proven to be the hydrogen bonding between PVA and TA, which also induces the crystallization of PVA chains. The self-assembled PVA-TA hydrogels have diverse morphologies that change from microspheres to oriented porous structures with the increase of the PVA-TA concentration, and these structures are all composed of nanosized particles, fibers, and/or sheets. Most of the self-assembled PVA-TA hydrogels show good mechanical properties. The highest tensile strength and elastic modulus of the PVA-TA hydrogel prepared with 1.0 wt % PVA-TA concentration are about 84 and 30 kPa, respectively. This self-assembly method would lead to the fabrication of more hydrogels with unique microstructures and properties for practical applications.

Multilayer Assembly of Tannic Acid and an Amphiphilic Copolymer Poloxamer 188 on Planar Substrates toward Multifunctional Surfaces with Discrete Microdome-Shaped Features

Tannic acid (TA) is a natural polyphenol compound with a broad spectrum of biological activities, the most notable of which being antioxidation. Poloxamer 188 (P188), a synthetic triblock copolymer of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), is amphiphilic in nature and best known for its ability to seal structurally damaged cellular membranes. The integration of both substances onto planar substrates could bring a new option for multifunctional coatings that are advantageous for implantable biomedical devices. Here, we demonstrate the feasibility of multilayer assembly of TA/P188 toward such a coating based on hydrogen bonding between phenolic hydroxyls of TA and ether groups of P188, and the unique surface feature it generates. The interactions between these two compounds were studied both in solution and in substrate-supported layer-by-layer assembly. The multilayer assembly process exhibits an exponential growth pattern as characterized by UV-vis spectrophotometry and quartz crystal microbalance with dissipation. Morphologically unique, microdome-shaped surface features emerge and evolve with the number of layers assembled. Such features bring a reservoir function to this coating, as demonstrated by the loading of hydrophobic nile red dye. Furthermore, the presence of TA in the multilayers was revealed by silver nitrate staining, and its antioxidation activity was demonstrated through a 2,2-diphenyl-1-picryl-hydrazyl free-radical scavenging assay.

Dynamic layer-by-layer films on nanofiber membrane: a platform for ultra-sensitive bacterial concentration detection

Herein, a new platform was established for ultra-sensitive bacterial concentration detection. The sensing system had a linear relationship with the logarithm of bacterial concentration from 1 × 101 to 1 × 105 CFU mL-1 within 5 min. Moreover, the platform showed excellent consistency compared with the traditional standard method against practical samples.

Polyphenols at interfaces

Polyphenols are important molecules in living organisms, particularly in plants, where they serve as protectants against predators. They are also of fundamental importance in pharmacology for their antioxidant and antibacterial activities. Since a few years polyphenols are also used in surface functionalization mimicking the tannin deposition observed when tea or red wine are in contact with the surface of cups or glasses respectively. The interaction of polyphenols with proteins to yield colloids and of polyphenol with surfaces will be reviewed in this article to provide an overview of such particles and surface functionalization methods in modern surface science. Particular emphasis will be given to biological applications of polyphenols at interfaces.

Hydrogen-Bonded Polymer Complex Thin Film of Poly(2-oxazoline) and Poly(acrylic acid)

The hydrogen-bonded polymer complex thin film of poly(2-ethyl-2-oxazoline) (PEOX) and poly(acrylic acid) (PAA) was fabricated with layer-by-layer (LbL) assembly. The film shows exponential growth at early stage and transfers to linear growth after 10 assembling cycles, and the stable thickness increment per assembling cycle in the linear region could be higher than 100 nm. The film growth should be related with polymer chain diffusion during LbL assembly. The effects of assembling time, rinsing time, temperature, pH value, concentration and molecular weight on the thin film growth were investigated. Increasing the assembly time, the temperature and the concentration is favorable to produce the thick film. Prolonging rinsing time is good for preparing smooth film. The film can be constructed below pH 4.5 while the prepared film will not completely dissolve until pH value elevates to 7.0. Molecular weight has a subtle effect on the PEOX/PAA film growth. The PEOX-PAA pair that has a big molecular weight contrast shows fast film growth in the linear region.

A Drug Carrier for Sustained Zero-Order Release of Peptide Therapeutics

Peptides have great potential as therapeutic agents, however, their clinic applications are severely hampered by their instability and short circulation half-life. Zero-order release carriers could not only extend the circulation lifetime of peptides, but also maintain the plasma drug level constant, and thus maximize their therapeutic efficacy and minimize their toxic effect. Here using PEGylated salmon calcitonin (PEG-sCT)/tannic acid (TA) film as an example, we demonstrated that hydrogen-bonded layer-by-layer films of a PEGylated peptide and a polyphenol could be a platform for zero-order peptide release. The films were fabricated under mild conditions. The second component, TA, is a natural product and presents potential therapeutic activities itself. Unlike common carriers, the new carrier releases the peptide via gradual disintegration of the film because of its dynamic nature. The release of PEG-sCT follows a perfect zero-order kinetics without initial burst release. In addition the release rate could be tuned via external stimuli, such as pH and temperature. When implanted in rats, the films could remain the plasma level of PEG-sCT constant over an extended period. Accordingly, the serum calcium level was reduced and maintained constant over the same period, suggesting an improved therapeutic efficacy of the released drug.

Stiffer but More Healable Exponential Layered Assemblies with Boron Nitride Nanoplatelets

Self-healing ability and the elastic modulus of polymeric materials may seem conflicting because of their opposite dependence on chain mobility. Here, we show that boron nitride (BN) nanoplatelets can simultaneously enhance these seemingly contradictory properties in exponentially layer-by-layer-assembled nanocomposites as both surface coatings and free-standing films. On one hand, embedding hard BN nanoplatelets into a soft hydrogen bonding network can enhance the elastic modulus and ultimate strength through effective load transfer strengthened by the incorporation of interfacial covalent bonding; on the other hand, during a water-enabled self-healing process, these two-dimensional flakes induce an anisotropic diffusion, maintain the overall diffusion ability of polymers at low loadings, and can be "sealing" agents to retard the out-of-plane diffusion, thereby hampering polymer release into the solution. A detailed mechanism study supported by a theoretical model reveals the critical parameters for achieving a complete self-healing process. The insights gained from this work may be used for the design of high-performance smart materials based on other two-dimensional fillers.

A Novel Platelet-Repellent Polyphenolic Surface and Its Micropattern for Platelet Adhesion Detection

Surface patterning provides a powerful tool to the diagnosis of platelet adhesion. However, the current methodologies of constructing platelet-patterned surfaces require laborious and complicated steps. Herein, a novel and simple platelet-repellent surface was reported by metal (Fe³⁺ ions)-polyphenol (tannic acid, TA) coordination interaction. The platelet-repellent effect was significantly better than that of poly(ethylene glycol) (PEG) in a long-term. Moreover, the platelet-repellent behavior could extend to other polyphenols-functionalized surfaces. On the basis of these observations, a TA-based micropattern was fabricated in situ by one-step microcontact printing for well-defined platelet adhesion, which can effectively avoid the traditional introduction of inert hydrophilic polymers and bioactive ligands. Afterward, the TA-based micropattern was applied to monitor the adhesion of defective platelets treated with an antiplatelet drug (tirofiban). This work provided a facile, versatile, and environmentally friendly strategy to construct platelet-repellent polyphenolic surfaces and their micropattern. We expect that this simple micropattern could act as a low-cost and label-free platform for biomaterials and biosensors, and could be widely used in the clinical diagnoses of platelet adhesive functions and the evaluation of antiplatelet therapies.

Zero-order release of polyphenolic drugs from dynamic, hydrogen-bonded LBL films

Drug carriers capable of releasing drugs at a constant rate, or following zero-order kinetics, can lead to the best control of plasma drug concentration. Here we demonstrated that zero-order release of polyphenolic drugs, including tannic acid, epigallocatechin gallate, proanthocyanidins, and theaflavin-3'-gallate, could be achieved using hydrogen-bonded layer-by-layer films as the drug carrier. The films were fabricated using the polyphenolic drugs as hydrogen donors and polyethylene glycol (PEG) as the hydrogen acceptor. Because the drugs and PEG are bonded with reversible, dynamic hydrogen bonds, the films disintegrate gradually in aqueous solutions, and thus release the drugs into the media. Furthermore, because the PEG polymers have a narrow molecular weight distribution, the films disintegrate and release the polyphenolic drugs at a constant rate. Besides allowing for zero-order release, the drug carrier developed here also provides various ways to tune the drug release rate. The drug release rate increases with decreasing molecular weight of PEG. More importantly, the release rate could be tuned using external stimuli. Increasing the pH or temperature results in accelerated drug release, while the addition of salt retards the drug release.

Coordination-driven multilayer of phosvitin-polyphenol functional nanofibrous membranes: antioxidant and biomineralization applications for tissue engineering

The layer-by-layer (LBL) deposition technique has been widely used to decorate the nanofibers formed from polymer pairs with complementary functional groups.

pH-Degradable antioxidant nanoparticles based on hydrogen-bonded tannic acid assembly

Hydrogen-bonded polyphenol-based assemblies have attracted increasing interest for biomedical applications.

Step-by-step deposition of type B gelatin and tannic acid displays a peculiar ionic strength dependence at pH 5

Tannic acid (TA), among other polyphenols, interacts strongly with proteins, in particular proline rich proteins, a mechanism which is at the origin of mouth astringency.

Nonuniform Growth of Composite Layer-by-Layer Assembled Coatings via Three-Dimensional Expansion of Hydrophobic Magnetite Nanoparticles

Nanocomposite coatings are promising for a range of practical applications, and layer-by-layer assembly (LbL) is a versatile tool for nanocomposite formation. However, conventional LbL is a quite laborious procedure taking a lot of time to reach a sufficient thickness of the coatings required for practical applications. Herein, we proposed a novel variant of the LbL approach based on the deposition of hydrophilic polyelectrolyte molecules from a polar solvent and hydrophobic magnetite nanoparticles (NPs) from a nonpolar dispersion medium with an intermediate washing in the same polar solvent. The composite multilayers formed in this way exhibit exponential growth of the thickness and mass. On the basis of quartz crystal microbalance (QCM), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), atomic force microscopy (AFM), and surface profile measurements, we propose a model describing the driving force of multilayer formation and the factors leading to nonlinear growth of their mass and thickness. The results allow one to expand the understanding of the mechanism of the LbL assembly in order to form multifunctional nanocomposites in a more efficient way.

Nanocoating for biomolecule delivery using layer-by-layer self-assembly

Since its introduction in the early 1990s, layer-by-layer (LbL) self-assembly of films has been widely used in the fields of nanoelectronics, optics, sensors, surface coatings, and controlled drug delivery. The growth of this industry is propelled by the ease of film manufacture, low cost, mild assembly conditions, precise control of coating thickness, and versatility of coating materials. Despite the wealth of research on LbL for biomolecule delivery, clinical translation has been limited and slow. This review provides an overview of methods and mechanisms of loading biomolecules within LbL films and achieving controlled release. In particular, this review highlights recent advances in the development of LbL coatings for the delivery of different types of biomolecules including proteins, polypeptides, DNA, particles and viruses. To address the need for co-delivery of multiple types of biomolecules at different timing, we also review recent advances in incorporating compartmentalization into LbL assembly. Existing obstacles to clinical translation of LbL technologies and enabling technologies for future directions are also discussed.