Asymmetric plasmonic aptasensor for sensitive detection of bisphenol A

Expanding the Role of Chiral Drugs and Chiral Nanomaterials as a Potential Therapeutic Tool

Chirality, the property of molecules having mirror-image forms, plays a crucial role in pharmaceutical and biomedical research. This review highlights its growing importance, emphasizing how chiral drugs and nanomaterials impact drug effectiveness, safety, and diagnostics. Chiral molecules serve as precise diagnostic tools, aiding in accurate disease detection through unique biomolecule interactions. The article extensively covers chiral drug applications in treating cardiovascular diseases, CNS disorders, local anesthesia, anti-inflammatories, antimicrobials, and anticancer drugs. Additionally, it explores the emerging field of chiral nanomaterials, highlighting their suitability for biomedical applications in diagnostics and therapeutics, enhancing medical treatments.

Sensitive detection of 17β-estradiol at a picomolar level using an aptamer-assisted liquid crystal-based optical sensor

A liquid crystal (LC)-based aptasensor was developed that can detect 17β-estradiol (E2) at the picomolar level. This aptasensor is based on competitive reactions of the aptamer that interacts with cetyl trimethyl ammonium bromide (CTAB) and E2 at the aqueous/LC interface. The long alkyl chain of CTAB anchored the 4-cyano-4'-pentylbiphenyl (5CB) to a homeotropic state and controls the local anchoring depending on the extent of electrostatic interaction with the aptamer. Upon addition of the aptamer solution to the CTAB-saturated LC layer, LCs change from dark to bright optical response. This is due to the perturbed orientation of 5CB at the aqueous/LC interface as a result of electrostatic attraction of the cationic group of CTAB and the phosphate group of the aptamer. The conformational change of the aptamer due to specific binding with E2 weakens the electrostatic attraction between CTAB and aptamer. When specific binding becomes relatively dominant, CTAB induces the orientation of LCs to the homeotropic state, resulting in a dark optical image observed. We also analyzed the change in the optical response of LCs according to the interfacial events and compared the grayscale values of the optical image for each concentration of E2 to determine the detection limit. Accordingly, the detection limit of the E2 sensor was found to be 3.1 pM (0.8 pg/ml) in Tris-buffered saline (TBS), and 6.8 pM (1.9 pg/ml) in human urine. The LC-based optical aptasensor was thus shown to be highly sensitive and selective with no requirement for complex analysis equipment.

An Overview of Aptamer-Based Sensor Platforms for the Detection of Bisphenol-A

Endocrine disruptive compounds are natural or anthropogenic environmental micropollutants that alter the function of the endocrine system ultimately damaging the metabolism. Bisphenol A (BPA) is the most common of these pollutants and it is often used in epoxy coatings and polycarbonates as a plasticizer. Therefore, monitoring BPA levels in different environments is very important and challenging. In recent years, an increasing number of BPA detection methods have been proposed. This article presents a critical review of aptamer-based electrochemical, fluorescence-based, colorimetric, and several other BPA detection platforms published in the last decade. Furthermore, a statistical evaluation has been made using principle component analysis showing analytical performance parameters do not create very different clusters. Comparisons to other BPA detection methods are also presented so that the reader has an overall literature overview.

Biological applications of chiral inorganic nanomaterials

Chirality is common in nature and plays the essential role in maintaining physiological process. Chiral inorganic nanomaterials with intense optical activity have attracted more attention due to amazing properties in recent years. Over the past decades, many efforts have been paid to the preparation and chirality origin of chiral nanomaterials; furthermore, emerging biological applications have been investigated widely. This review mainly summarizes recent advances in chiral nanomaterials. The top-down and bottom-up preparation methods and chirality origin of chiral nanomaterials are introduced; besides, the biological applications, such as sensing, therapy, and catalysis, will be introduced comprehensively. Finally, we also provide a perspective on the biomedical applications of chiral nanomaterials.

The hazardous threat of Bisphenol A: Toxicity, detection and remediation

Bisphenol A (or BPA) is a toxic endocrine disrupting chemical that is released into the environment through modern manufacturing practices. BPA can disrupt the production, function and activity of endogenous hormones causing irregularity in the hypothalamus-pituitary-gonadal glands and also the pituitary-adrenal function. BPA has immuno-suppression activity and can downregulate T cells and antioxidant genes. The genotoxicity and cytotoxicity of BPA is paramount and therefore, there is an immediate need to properly detect and remediate its influence. In this review, we discuss the toxic effects of BPA on different metabolic systems in the human body, followed by its mechanism of action. Various novel detection techniques (LC-MS, GC-MS, capillary electrophoresis, immunoassay and sensors) involving a pretreatment step (liquid-liquid microextraction and molecularly imprinted solid-phase extraction) have also been detailed. Mechanisms of various remediation strategies, including biodegradation using native enzymes, membrane separation processes, photocatalytic oxidation, use of nanosorbents and thermal degradation has been detailed. An overview of the global regulations pertaining to BPA has been presented. More investigations are required on the efficiency of integrated remediation technologies rather than standalone methods for BPA removal. The effect of processing operations on BPA in food matrices is also warranted to restrict its transport into food products.

Surface-Enhanced Raman Sensing of Semi-Volatile Organic Compounds by Plasmonic Nanostructures

Facile detection of indoor semi-volatile organic compounds (SVOCs) is a critical issue to raise an increasing concern to current researchers, since their emissions have impacted the health of humans, who spend much of their time indoors after the recent incessant COVID-19 pandemic outbreaks. Plasmonic nanomaterial platforms can utilize an electromagnetic field to induce significant Raman signal enhancements of vibrational spectra of pollutant molecules from localized hotspots. Surface-enhanced Raman scattering (SERS) sensing based on functional plasmonic nanostructures has currently emerged as a powerful analytical technique, which is widely adopted for the ultra-sensitive detection of SVOC molecules, including phthalates and polycyclic aromatic hydrocarbons (PAHs) from household chemicals in indoor environments. This concise topical review gives updated recent developments and trends in optical sensors of surface plasmon resonance (SPR) and SERS for effective sensing of SVOCs by functionalization of noble metal nanostructures. Specific features of plasmonic nanomaterials utilized in sensors are evaluated comparatively, including their various sizes and shapes. Novel aptasensors-assisted SERS technology and its potential application are also introduced for selective sensing. The current challenges and perspectives on SERS-based optical sensors using plasmonic nanomaterial platforms and aptasensors are discussed for applying indoor SVOC detection.

Shining light on chiral inorganic nanomaterials for biological issues

The rapid development of chiral inorganic nanostructures has greatly expanded from intrinsically chiral nanoparticles to more sophisticated assemblies made by organics, metals, semiconductors, and their hybrids. Among them, lots of studies concerning on hybrid complex of chiral molecules with achiral nanoparticles (NPs) and superstructures with chiral configurations were accordingly conducted due to the great advances such as highly enhanced biocompatibility with low cytotoxicity and enhanced penetration and retention capability, programmable surface functionality with engineerable building blocks, and more importantly tunable chirality in a controlled manner, leading to revolutionary designs of new biomaterials for synergistic cancer therapy, control of enantiomeric enzymatic reactions, integration of metabolism and pathology via bio-to nano or structural chirality. Herein, in this review our objective is to emphasize current research state and clinical applications of chiral nanomaterials in biological systems with special attentions to chiral metal- or semiconductor-based nanostructures in terms of the basic synthesis, related circular dichroism effects at optical frequencies, mechanisms of induced optical chirality and their performances in biomedical applications such as phototherapy, bio-imaging, neurodegenerative diseases, gene editing, cellular activity and sensing of biomarkers so as to provide insights into this fascinating field for peer researchers.

Metal Organic Frame-Upconverting Nanoparticle Assemblies for the FRET Based Sensor Detection of Bisphenol A in High-Salt Foods

To resolve the occurrence of unfulfillable detection in high-salts foods, we used fluorescence resonant energy transfer (FRET) sensors based on nanoparticle upconversion. In this study, we developed a novel FRET sensor for the detection of bisphenol A (BPA) in high-salt foods. We based this approach on the assembly of aptamer modified upconversion nanoparticles (DNA1-UCNPs) and complementary DNA modified metal organic frames (DNA2-MOFs), which possessed corresponding wavelength absorption. Targeting BPA signal transduction was performed using the BPA aptamer, via competitive recognition between the BPA analyte and complementary DNA sequences in a high-salt solution. Sensor adaption in high-salt samples was attributed to functional hydrophilic groups, modified in the MOFs, and the enhanced colloidal stability of these MOFs. The MOF-UCNP assembly displayed considerable analytical performance in terms of BPA detection, with a linear range of 0.1-100 nM, and a limit of detection (LOD) of 0.02 nM, in a 340 mM NaCl food sample (the energy drink, Gatorade). Thus, this method provides a solid basis for small molecules detection in high-salt foods.

DNA-Modulated Plasmon Resonance: Methods and Optical Applications

The near-field effects in the vicinity of metallic nanoparticle surfaces, as induced by electromagnetic radiation with specific wavelength, give rise to a variety of novel optical properties and attractive applications because of surface plasmons, which are the coherent oscillations of conduction electrons on a metal surface. The interdisciplinary field of plasmonics has witnessed vigorous growth, promoting research on the modulation of plasmon resonance by constructing advanced plasmonic nanoarchitectures with controllable size, morphology, or interparticle coupling. Among diversified tools, deoxyribonucleic nucleic acid (DNA) possesses prominent superiority as a result of its designability, programmability, addressability, and ease of nanomaterial modification. In this review, we focus on the methods and optical applications of plasmon resonance modulation accomplished by DNA nanotechnology. Recent developments in the construction of DNA-mediated plasmonic nanoarchitecture and key ongoing research directions utilizing unique optical features are highlighted. Obstacles and challenges in this field are pointed out, followed by preliminary suggestions on some areas of opportunity that deserve attention.

High affinity truncated aptamers for ultra-sensitive colorimetric detection of bisphenol A with label-free aptasensor

The widespread exposure of bisphenol A (BPA) presents a significant risk to human health. A rapid, ultra-sensitive and label-free colorimetric aptasensor using high affinity truncated aptamers was developed for BPA detection. Truncated 38-mer and 12-mer aptamers specific for BPA were obtained through rationally truncation from 63-mer BPA aptamer. The dissociation constants (K_d) of 38-mer and 12-mer aptamers were determined to be 13.17 nM and 27.05 nM. Then, truncated aptamers were used in label-free colorimetric detection assays based on gold nanoparticles (AuNPs). The limit of detections of aptasensors using 38-mer and 12-mer aptamers were 7.60 pM and 14.41 pM, which were 265-fold and 140-fold lower than that of the aptasensor using 63-mer aptamer, respectively. The recovery rates in milk, orange juice and mineralized water samples were 93.88% to 107.30%. Therefore, the developed BPA colorimetric aptasensor using truncated aptamers has great application prospects in food safety control and environmental monitoring.

Rapid and sensitive determination of bisphenol A using aptamer and split DNAzyme

Despite the increasing concern regarding bisphenol A (BPA) as an endocrine disrupting chemical (EDC) upon environmental or human exposure, development of simple method for BPA detection has been hampered, due to the lack of a stable bioreceptor and signal generator. Here, we report a nucleic acid-based rapid and sensitive method for BPA detection, which constitutes a ssDNA aptamer and ssDNAzyme. When the peroxidase-like DNAzyme sequence was split into two parts (one incorporated into the anti-BPA aptamer as a target recognition element and the other into the complementary sequence as a bait), the presence of BPA hindered the association of the split DNA sequence, leading to a reduced signal in the DNAzyme-triggered chemiluminescence (CL). Thus, this NA-based CL measurement permitted the detection of BPA at as low as 5 nM with a broad dynamic range of five orders and with high selectivity towards BPA over other EDCs with structural similarity. With the development of aptamers, our detection method is expected to facilitate studies to monitor EDCs with high simplicity and sensitivity in the field of environmental science.

Simple and rapid detection of bisphenol A using a gold nanoparticle-based colorimetric aptasensor

A colorimetric aptasensor was developed for the simple and rapid detection of bisphenol A (BPA). The aptasensor was designed to consist of colloidal gold nanoparticles (AuNPs) and a BPA-specific 24-bp aptamer. The AuNP-aptamer conjugates underwent an electrolyte-induced aggregation in the presence of sub-ppb levels of BPA. The surface plasmon resonance shift of AuNPs facilitated a color change from red to blue upon aggregation, which was visually observed by the naked eye. The corresponding visual limit of detection of BPA was as low as 1 pg/mL (0.004 nM). The aptasensor also achieved a selective detection of BPA over a variety of BPA analogs. The applicability of the aptasensor was verified via a successful detection of BPA in a single grain of rice. This result indicates that the colorimetric aptasensor can be used in a screening procedure for food and environmental monitoring, with reliable performance to sub-ppb levels of BPA detection.

Highly efficient catalysis of chalcopyrite with surface bonded ferrous species for activation of peroxymonosulfate toward degradation of bisphenol A: A mechanism study

Chalcopyrite nanoparticles (CuFeS₂ NPs) with abundant surface bonded ferrous were successfully prepared, characterized and used as a catalyst for peroxymonosulfate (PMS) activation and BPA degradation. The effect of reaction parameters such as initial pH, catalyst load, PMS concentration, initial BPA concentration and reaction temperature on BPA degradation in CuFeS₂-PMS system was systematically investigated. As a bimetallic sulfide, CuFeS₂ exhibits ultra-high activity for PMS activation compared with Cu₂S, FeS₂, CuFeO₂ and Co₃O₄. It was found that by co-use of 0.1 g L^-1 CuFeS₂ and 0.3 mmol L^-1 PMS, 20 mg L^-1 of BPA was almost completely degraded (99.7%) and reached a mineralization rate of 75% within 20 min. The highly catalytic activity of CuFeS₂ is closely related to two aspects: one is that S^2- in the catalysts promotes the cycling of Fe³⁺/Fe²⁺ and Cu²⁺/Cu⁺ cycles on the surface, and the other is the synergistic effect of Fe³⁺/Fe²⁺ and Cu²⁺/Cu⁺ cycles in the PMS activation. These interesting findings shed some new insight on the development of metal sulfides for the oxidative treatment of organic contaminants.

Quantitative screening for endocrine-disrupting bisphenol A in consumer and household products using NanoAptamer assay

The NanoAptamer assay is a bisphenol A (BPA) quantification method that uses magnetic beads, quantum dot nanoparticles, and a BPA-specific aptamer. In this study, screening of various consumer and household products for BPA was demonstrated utilizing the NanoAptamer assay. First, the experimental conditions suitable for BPA detection using the NanoAptamer assay were examined in terms of incubation time, temperature, and buffer composition. The range of BPA quantification via the NanoAptamer assay was determined to be 0.005-1000 ng/mL of BPA. The selectivity was confirmed by detecting BPA in an analog mixture containing bisphenol S and bisphenol F. Finally, a leaching experiment using 20 consumer and household products classified into 4 categories was performed to demonstrate the capability of the NanoAptamer assay for BPA detection. The experiment was validated by high-performance liquid chromatography analysis (correlation coefficient, r = 0.99).

Critical Review: DNA Aptasensors, Are They Ready for Monitoring Organic Pollutants in Natural and Treated Water Sources?

There is a growing need to monitor anthropogenic organic contaminants detected in water sources. DNA aptamers are synthetic single-stranded oligonucleotides, selected to bind to target contaminants with favorable selectivity and sensitivity. These aptamers can be functionalized and are used with a variety of sensing platforms to develop sensors, or aptasensors. In this critical review, we (1) identify the state-of-the-art in DNA aptamer selection, (2) evaluate target and aptamer properties that make for sensitive and selective binding and sensing, (3) determine strengths and weaknesses of alternative sensing platforms, and (4) assess the potential for aptasensors to quantify environmentally relevant concentrations of organic contaminants in water. Among a suite of target and aptamer properties, binding affinity is either directly (e.g., organic carbon partition coefficient) or inversely (e.g., polar surface area) correlated to properties that indicate greater target hydrophobicity results in the strongest binding aptamers, and binding affinity is correlated to aptasensor limits of detection. Electrochemical-based aptasensors show the greatest sensitivity, which is similar to ELISA-based methods. Only a handful of aptasensors can detect organic pollutants at environmentally relevant concentrations, and interference from structurally similar analogs commonly present in natural waters is a yet-to-be overcome challenge. These findings lead to recommendations to improve aptasensor performance.

Influence of gastrointestinal tract on metabolism of bisphenol A as determined by in vitro simulated system

Oral exposure is a major route of human bisphenol A (BPA) exposure. However, influence of gastrointestinal tract on BPA metabolism is unavailable. In this study, in vitro simulator of the human intestinal microbial ecosystem (SHIME) was applied to investigate the changes in bioaccessibility and metabolism of BPA in different parts of gastrointestinal tract (stomach, small intestine and colon). Then the human hepatoma cell line HepG2 was employed to compare toxic effects of BPA itself and effluents of SHIME system on hepatic gene expression profiles. Results showed that level of bioaccessible BPA decreased with the process of gastrointestinal digestion. But the gastrointestinal digestion could not completely degrade BPA. Then, BPA exposure significantly changed microbial community in colons and increased the percentage of microbes shared in ascending, transverse and descending colons. Abundances of BPA-degradable bacteria, such as Microbacterium and Alcaligenes, were up-regulated. Further, SHIME effluents significantly up-regulated expressions of genes related to estrogenic effect and oxidative stress compared to BPA itself, but reduced or had little change on the risk of cell apoptosis and fatty deposits. This study sheds new lights on influence of gastrointestinal digestion on bioaccessibility and toxic effects of BPA.

Detection of Bisphenol A Using DNA-Functionalized Graphene Field Effect Transistors Integrated in Microfluidic Systems

Bisphenol A (BPA) detection has attracted much attention recently for its importance to food safety and environment. The DNA-functionalized solution-gated graphene transistors are integrated in microfluidic systems and used for recycling detections of BPA for the first time. In the presence of BPA, both single- and double-stranded DNA molecules are detached and released from the graphene surface in aqueous solutions, leading to the change of device electrical performance. The channel currents of the devices change monotonically with the concentration of BPA. Moreover, the devices modified with double-stranded DNA are more sensitive to BPA and show the detection limit down to 10 ng/mL. The highly sensitive label-free BPA sensors are expected to be used for convenient BPA detections in many applications.

Recognition of chiral zwitterionic interactions at nanoscale interfaces by chiroplasmonic nanosensors

The ability to detect chiral molecules renders plasmonic nanosensors as promising tools for the study of chirality phenomena in living systems. Using gold nanorod based plasmonic nanosensors, we investigated here typically chiral zwitterionic electrostatic (Zw-Es) and hydrogen-bonding (Hb) interactions occurring via amine and carboxylic groups at nanoscale interfaces in aqueous solutions. Our results reveal that the plasmonic circular dichroism responses of the nanosensors can have both conformational sensitivity and chiral selectivity to the interfacial molecular interactions. Such a dual function of the plasmonic nanosensors enables a new chiroptical way to differentiate between chiral Zw-Es and Hb interactions, to monitor the transformation between these two interaction forces, and particularly to recognize homochiral Zw-Es interactions in solution. Together with the surface enhanced Raman scattering (SERS) technique, this plasmonic CD based biosensing could have important values for the insightful understanding of chirality-dependent molecular recognition in biological and pharmaceutical systems.

A catalytic and dual recycling amplification ATP sensor based on target-driven allosteric structure switching of aptamer beacons

Abnormal concentrations of ATP are associated with many diseases and cancers, and quantitative detection of ATP is thus of great importance for disease diagnosis and prognosis. In the present work, we report a new dual recycling amplification sensor integrated with catalytic hairpin assembly (CHA) to achieve high sensitivity for fluorescent detection of ATP. The association of the target ATP with the aptamer beacons causes the allosteric structure switching of the aptamer beacons to expose the toehold regions, which hybridize with and unfold the fluorescently quenched hairpin signal probes (HP1) to recycle the target ATP and to trigger CHA between HP1 and the secondary hairpin probes (HP2) to form HP1/HP2 duplexes. Due to the recycling amplification, the presence of ATP leads to the formation of many HP1/HP2 duplexes, generating dramatically amplified fluorescent signals for sensitive detection of ATP. Under optimal experimental conditions, our sensor linearly responds to ATP in the range from 25 to 600nM with a calculated detection limit of 8.2nM. Furthermore, the sensor shows a high selectivity and can also be used to detect ATP in human serums to realize its application for real samples. With the distinct advantage of significant signal amplification without the involvement of any nanomaterial and enzyme, the developed sensor thus holds great potential for simple and sensitive detection of different small molecules and proteins.

Biological Molecules-Governed Plasmonic Nanoparticle Dimers with Tailored Optical Behaviors

Self-assembly opens new avenues to direct the organization of nanoparticles (NPs) into discrete structures with predefined configuration and association numbers. Plasmonic NP dimers provide a well-defined system for investigating the plasmonic coupling and electromagnetic (EM) interaction in arrays of NPs. The programmability and structural plasticity of biomolecules offers a convenient platform for constructing of NP dimers in a controllable way. Plasmonic coupling of NPs enables dimers to exhibit tunable optical properties, such as surface-enhanced Raman scattering (SERS), chirality, photoluminescence, and electrochemiluminescence (ECL) properties, which can be tailored by altering the biomolecules, the building blocks with distinct compositions, sizes and morphology, the interparticle distances, as well as the geometric configuration of the constituent NPs. An overview of recent developments in biological molecules-governed NP dimers, the tailored optical behaviors, and challenges in enhancing optical signals and proposing plasmonic biosensors are discussed in this Perspective.

Advances in sensing and biosensing of bisphenols: A review

Bisphenols (BPs) are well known endocrine disrupting chemicals (EDCs) that cause adverse effects on the environment, biotic life and human health. BPs have been studied extensively because of an increasing concern for the safety of the environment and for human health. They are major raw materials for manufacturing polycarbonates, thermal papers and epoxy resins and are considered hazardous environmental contaminants. A vast array of sensors and biosensors have been developed for the sensitive screening of BPs based on carbon nanomaterials (carbon nanotubes, fullerenes, graphene and graphene oxide), quantum dots, metal and metal oxide nanocomposites, polymer nanocomposites, metal organic frameworks, ionic liquids and molecularly imprinted polymers. This review is devoted mainly to a variety of sensitive, selective and reliable sensing and biosensing methods for the detection of BPs using electrochemistry, fluorescence, colorimetry, surface plasmon resonance, luminescence, ELISAs, circular dichroism, resonance Rayleigh scattering and adsorption techniques in plastic products, food samples, food packaging, industrial wastes, pharmaceutical products, human body fluids and many other matrices. It summarizes the advances in sensing and biosensing methods for the detection of BPs since 2010. Furthermore, the article discusses challenges and future perspectives in the development of novel sensing methods for the detection of BP analogs.

Highly Sensitive Detection of Bisphenol A by NanoAptamer Assay with Truncated Aptamer

For the sensitive quantification of bisphenol A (BPA), we have developed NanoAptamer assay, which employs aptamer and complementary signaling DNA, a set of quantum dots (QD), and magnetic beads (MBs). Signaling DNA-QD₆₅₅ was tethered to MB-QD₅₆₅ via the aptamer. The affinity of the aptamer to BPA resulted in the release of the signaling DNA-QD₆₅₅ from the complex and hence the corresponding decrease in the QD₆₅₅ fluorescence measurement signal. Three new aptamers (23, 58, and 24-mer) were designed via truncation of the reference aptamer (73-mer). The sensitivity and selectivity of each aptamer for BPA detection via NanoAptamer assay were investigated. One of the truncated aptamers (24-mer) has shown a significantly better performance (limit of detection, LOD, 0.17 pg/mL) than the reference 73-mer aptamer (LOD, 570 pg/mL). It has also shown the best selectivity for BPA detection over BPA analogues (i.e., bisphenol B, bisphenol C, and diethylstilbestrol). It corresponded to a normalized fluorescence change of 33.7% at the environmentally relevant concentration of 1 ng/mL (1 ppb) BPA; however, the analogues remained unchanged (2.3-3.9%).

Magnetic separate "turn-on" fluorescent biosensor for Bisphenol A based on magnetic oxidation graphene

Bisphenol A (BPA) is commonly considered to cause a health hazard to wildlife and humans, acting as an exogenous estrogen. Herein, a magnetic separate "turn-on" fluorescent method for the detection of BPA was proposed based on fluorescence resonance energy transfer (FRET) between fluorescein-labeled BPA aptamer and magnetic oxidation graphene (MGO). At different concentrations of BPA, the fluorescence intensity of the sensing system was varied. The detection limit of 0.071ng/mL was obtained with the linear range of 0.2-10ng/mL. The biosensor exhibited excellent anti-interference ability and selectivity in actual water samples.

Detection of bisphenol A using palm-size NanoAptamer analyzer

We have demonstrated a palm-size NanoAptamer analyzer capable of detecting bisphenol A (BPA) at environmentally relevant concentrations (<1ng/mL or ppb). It is designed for performing reaction and fluorescence measurement on single cuvette sample. Modified NanoGene assay was used as the sensing mechanism where signaling DNA and QD₆₅₅ was tethered to QD₅₆₅ and magnetic bead via the aptamer. Aptamer affinity with BPA resulted in the release of the signaling DNA and QD₆₅₅ from the complex and hence corresponding decrease in QD₆₅₅ fluorescence measurement signal. Baseline characterization was first performed with empty cuvettes, quantum dots and magnetic beads under near-ideal conditions to establish essential functionality of the NanoAptamer analyzer. Duration of incubation time, number of rinse cycles, and necessity of cuvette vibration were also investigated. In order to demonstrate the capability of the NanoAptamer analyzer to detect BPA, samples with BPA concentrations ranging from 0.0005 to 1.0ng/mL (ppb) were used. The performance of the NanoAptamer analyzer was further examined by using laboratory protocol and commercial spectrofluorometer as reference. Correlation between NanoAptamer analyzer and laboratory protocol as well as commercial spectrofluorometer was evaluated via correlation plots and correlation coefficients.

Aptamer-based electrochemical biosensor by using Au-Pt nanoparticles, carbon nanotubes and acriflavine platform

Herein, an ultrasensitive electrochemical aptasensor for quantitative detection of bisphenol A (BPA) was fabricated based on a novel signal amplification strategy. This aptasensor was developed by electrodeposition of gold-platinum nanoparticles (Au-PtNPs) on glassy carbon (GC) electrode modified with acid-oxidized carbon nanotubes (CNTs-COOH). In this protocol, acriflavine (ACF) was covalently immobilized at the surface of glassy carbon electrode modified with Au-PtNPs/CNTs-COOH nanocomposite. Attachment of BPA-aptamer at the surface of modified electrode was performed through the formation of phosphoramidate bonds between the amino group of ACF and phosphate group of the aptamer at 5'end. By interaction of BPA with the aptamer, the conformational of aptamer was changed which lead to retarding the interfacial electron transfer of ACF as a probe. Sensitive quantitative detection of BPA was carried out by monitoring the decrease of differential pulse voltammetric (DPV) responses of ACF peak current with increasing the BPA concentration. The resultant aptasensor exhibited good specificity, stability and reproducibility, indicating that the present strategy was promising for broad potential application.

Biologically templated assembly of hybrid semiconducting nanomesh for high performance field effect transistors and sensors

Delicately assembled composites of semiconducting nanomaterials and biological materials provide an attractive interface for emerging applications, such as chemical/biological sensors, wearable health monitoring devices, and therapeutic agent releasing devices. The nanostructure of composites as a channel and a sensing material plays a critical role in the performance of field effect transistors (FETs). Therefore, it is highly desirable to prepare elaborate composite that can allow the fabrication of high performance FETs and also provide high sensitivity and selectivity in detecting specific chemical/biological targets. In this work, we demonstrate that high performance FETs can be fabricated with a hydrodynamically assembled composite, a semiconducting nanomesh, of semiconducting single-walled carbon nanotubes (S-SWNTs) and a genetically engineered M13 phage to show strong binding affinity toward SWNTs. The semiconducting nanomesh enables a high on/off ratio (~10⁴) of FETs. We also show that the threshold voltage and the channel current of the nanomesh FETs are sensitive to the change of the M13 phage surface charge. This biological gate effect of the phage enables the detection of biologically important molecules such as dopamine and bisphenol A using nanomesh-based FETs. Our results provide a new insight for the preparation of composite material platform for highly controllable bio/electronics interfaces.

A novel impedimetric aptasensor, based on functionalized carbon nanotubes and prussian blue as labels

A simple and feasible electrochemical sensing protocol was developed for the detection of bisphenol A (BPA) by employing the gold nanoparticles (AuNPs), prussian blue (PB) and functionalized carbon nanotubes (AuNPs/PB/CNTs-COOH). An aminated complementary DNA as a capture probe and specific aptamer against BPA as a detection probe was immobilized on the surface of a modified glassy carbon (GC) electrode via the formation of covalent amide bond and hybridization, respectively. The proposed nanoaptasensor combined the advantages of the in situ formation of PB as a label, the deposition of neatly arranged AuNPs, and the covalent attachment of the capture probe to the surface of the modified electrode. Upon addition of target BPA, the analyte reacted with the aptamer and caused the steric/conformational restrictions on the sensing interface. The formation of BPA-aptamer complex at the electrode surface retarded the interfacial electron transfer reaction of the PB as a probe. Sensitive quantitative detection of BPA was carried out based on the variation of electron transfer resistance which relevant to the formation of BPA- aptamer complex at the modified electrode surface. Under the optimized conditions, the proposed aptasensor exhibited a high sensitivity, wide linearity to BPA and low detection limit. This aptasensor also displayed a satisfying electrochemical performance with good stability, selectivity and reproducibility.

Recent advances and progress in the detection of bisphenol A

Bisphenol A (BPA) is an important industrial chemical used as a plasticizer in polycarbonate and epoxy resins in the plastic and paper industries. Because of its estrogenic properties, BPA has attracted increasing attention from many researchers. This review focuses primarily on analytical methods for BPA detection that have emerged in recent years. We present and discuss the advantages and disadvantages of sample preparation techniques (e.g., solvent extraction, solid-phase extraction, molecularly imprinted polymer solid-phase extraction, and micro-extraction techniques) and analytical methods (e.g., liquid chromatography, liquid chromatography-mass spectrometry, gas chromatography-mass spectrometry, capillary electrophoresis, immunoassay, and several novel sensors). We also discuss expected future developments for the detection of BPA. Graphical Abstract This review focuses primarily on the recent development in the detection of bisphenol A including sample pre-treatment and analytical methods.

A novel aptasensor for thrombin detection based on alkaline phosphatase decorated ZnO/Pt nanoflowers as signal amplifiers

To remedy the problems caused by the introduction of an additional electron mediator and realize signal amplification, a new strategy has been presented to construct an electrochemical aptasensor for thrombin detection based on the cascade electrocatalysis of alkaline phosphatase (ALP) and Pt nanoparticle (PtNP)-functionalized ZnO nanoflowers.

Selection and Biosensor Application of Aptamers for Small Molecules

Small molecules play a major role in the human body and as drugs, toxins, and chemicals. Tools to detect and quantify them are therefore in high demand. This review will give an overview about aptamers interacting with small molecules and their selection. We discuss the current state of the field, including advantages as well as problems associated with their use and possible solutions to tackle these. We then discuss different kinds of small molecule aptamer-based sensors described in literature and their applications, ranging from detecting drinking water contaminations to RNA imaging.

Design of ultrasensitive bisphenol A-aptamer based on platinum nanoparticles loading to polyethyleneimine-functionalized carbon nanotubes

Here, a highly sensitive electrochemical aptasensor based on a novel signal amplification strategy for the determination of bisphenol A (BPA) was developed. Construction of the aptasensor began with the deposition of highly dispersed platinum nanoparticles (PtNPs)/acid-oxidized carbon nanotubes (CNTs-COOH) functionalized with polyethyleneimine (PEI) at the surface of glassy carbon (PtNPs/PEI/CNTs-COOH/GC) electrode. After immobilizing the amine-capped capture probe (ssDNA1) through the covalent amide bonds formed by the carboxyl groups on the nanotubes and the amino groups on the oligonucleotides, we employed a designed complementary BPA-aptamer (ssDNA2) as a detection probe to hybridize with the ssDNA1. By adding BPA as a target, the aptamer specifically bound to BPA and its end folded into a BPA-binding junction. Because of steric/conformational restrictions caused by aptamer-BPA complex formation at the surface of modified electrode, the interfacial electron transfer of [Fe(CN)6](3-/4-) as a probe was blocked. Sensitive quantitative detection of BPA was carried out by monitoring the decrease of differential pulse voltammetric responses of [Fe(CN)6](3-/4-) peak current with increasing BPA concentrations. The newly developed aptasensor embraced a number of attractive features such as ease of fabrication, low detection limit, excellent selectivity, good stability and a wide linear range with respect to BPA.

Building SERS-active heteroassemblies for ultrasensitive Bisphenol A detection

Bisphenol A (BPA) usually exists in daily plastic products, as one of the most important endocrine disrupting chemicals. A sensitive surface-enhanced Raman scattering (SERS)-encoded aptasensor for the detection of BPA was developed, for the first time, based on gold nanoparticle-nanorod heteroassemblies. The high electromagnetic enhancement in narrow gaps between metal nanoparticles of these heteroassemblies led to marked Raman signals. It was found that the assembly degree and the corresponding SERS signals were in inverse correlation to the BPA concentrations over a wide linear range of 0.001-1ng/mL and the limit of detection was as low as 3.9pg/mL. Excellent recovery ranging from 91% to 95.3% was obtained to assess the feasibility of this method for real sample detection, indicating promising application for the detection of BPA.

Emerging enantiomeric resolution materials with homochiral nano-fabrications

The major scientific challenge of enantiomeric separation is to develop simple, rapid, and sensitive routine analytical methods. Generally, enantio-resolution is still based on "three-point interaction" theory, which indicates that homochiral sites are needed for enantio-selective interaction. However, in recent years, advanced materials with precise homochiral fabrication at the nanoscale have been synthesized, and have shown great potential in development of high-throughput enantio-resolution methods. This tutorial review summarizes fabrication and applications of homochiral materials for enantio-selective recognition and separation. These materials, which include intrinsic and restructured chiral metal surfaces, plasmonic nanostructures, coordination polymers, organic polymer sensors, and molecularly imprinted polymers, have been applied as sensors or chiral stationary phases (CSPs) for efficient enantio-resolution.

Single-Stranded DNA Aptamers against Pathogens and Toxins: Identification and Biosensing Applications

Molecular recognition elements (MREs) can be short sequences of single-stranded DNA, RNA, small peptides, or antibody fragments. They can bind to user-defined targets with high affinity and specificity. There has been an increasing interest in the identification and application of nucleic acid molecular recognition elements, commonly known as aptamers, since they were first described in 1990 by the Gold and Szostak laboratories. A large number of target specific nucleic acids MREs and their applications are currently in the literature. This review first describes the general methodologies used in identifying single-stranded DNA (ssDNA) aptamers. It then summarizes advancements in the identification and biosensing application of ssDNA aptamers specific for bacteria, viruses, their associated molecules, and selected chemical toxins. Lastly, an overview of the basic principles of ssDNA aptamer-based biosensors is discussed.

Building an aptamer/graphene oxide FRET biosensor for one-step detection of bisphenol A

Bisphenol A (BPA) is an important industrial chemical for polycarbonate (PC) and epoxy resins in paper and plastic industries. In our work, a kind of new method for detection of BPA was designed based on graphene oxide and anti-BPA aptamer. The graphene oxide can specifically adsorb and quench the fluorescence of fluorescently modified ssDNA probes. Meanwhile, the BPA can combine with anti-BPA optamer and switch its configuration to prevent the aptamer from adsorbing on the surface of graphene oxide (GO). Under different concentrations of BPA, based on the target-induced conformational change of anti-BPA aptamer and the interactions between the fluorescently modified anti-BPA aptamer (FAM-ssDNA) and GO, the experimental results show that the intensity of the fluorescence signal was changed. A low limit of detection of 0.05 ng/mL was obtained in the range 0.1-10 ng/mL. In addition, the specificity was outstanding among analogues of BPA. The recovery rate in actual water samples spiked with BPA can be 96.0% to 104.5%. The developed method was successfully used to determine BPA in actual water samples.

A novel label-free aptasensor based on target-induced structure switching of aptamer-functionalized mesoporous silica nanoparticles

A strategy for high-performance liquid chromatography detection of adenosine triphosphate was developed based on mesoporous silica nanoparticles functionalized with an aptamer as a cap.

Dendritic Pt@Au nanowires as nanocarriers and signal enhancers for sensitive electrochemical detection of carcinoembryonic antigen

An electrochemical aptasensor for the sensitive and selective determination of carcinoembryonic antigen was constructed based on dendritic Pt@AuNWs as nanocarriers and signal enhancers.

Aptamer-based technology for food analysis

Aptamers are short and functional single-stranded oligonucleotide sequences selected from systematic evolution of ligands by exponential enrichment (SELEX) process, which have the capacity to recognize various classes of target molecules with high affinity and specificity. Various analytical aptamers acquired by SELEX are widely used in many research fields, such as medicine, biology, and chemistry. However, the application of this innovative and emerging technology to food safety is just in infant stage. Food safety plays a very important role in our daily lives because varieties of poisonous and harmful substances in food affect human health. Aptamer technique is promising, which can overcome many disadvantages of existing detection methods in food safety, such as long detection time, low sensitivity, difficult, and expensive antibody preparation. This review provides an overview of various aptamer screening technologies and summarizes the recent applications of aptamers in food safety, and future prospects are also discussed.

Surface-enhanced Raman scattering aptasensor for ultrasensitive trace analysis of bisphenol A

Surface-enhanced Raman scattering (SERS)-based aptasensor platform, using double strand DNA-embedded Au/Ag core-shell nanoparticles, has been developed for the ultrasensitive detection of bisphenol A (BPA) in water. By combining optimally controlled Au/Ag core-shell nanoparticles with the selective BPA binding characteristics of DNA aptamers, a highly sensitive limit of detection (LOD) of 10 fM could be achieved for BPA-spiked tap water over a wide concentration range from 100 nM to 10 fM. This LOD is two or three orders of magnitude lower than that reported for other BPA sensing techniques, and also yields a detection limit that is 100-1000 times lower than the US EPA-defined Predicted No Effect Concentration (PNEC) values in potable water. Total detection time is estimated to be about 40 min including the reaction between aptamer and BPA (30 min) and detection (10 min). This sensing platform is also suitable for field applications since measurement can be performed under aqueous colloidal conditions.

Development of an ELISA and immunochromatographic strip for highly sensitive detection of microcystin-LR

A monoclonal antibody for microcystin-leucine-arginine (MC-LR) was produced by cell fusion. The immunogen was synthesized in two steps. First, ovalbumin/ bovine serum albumin was conjugated with 6-acetylthiohexanoic acid using a carbodiimide EDC (1-ethyl-3-[3-dimethylaminopropyl]carbodiimide hydrochloride)/ NHS (N-hydroxysulfosuccinimide) reaction. After dialysis, the protein was reacted with MC-LR based on a free radical reaction under basic solution conditions. The protein conjugate was used for immunization based on low volume. The antibodies were identified by indirect competitive (ic)ELISA and were subjected to tap water and lake water analysis. The concentration causing 50% inhibition of binding of MC-LR (IC50) by the competitive indirect ELISA was 0.27 ng/mL. Cross-reactivity to the MC-RR, MC-YR and MC-WR was good. The tap water and lake water matrices had no effect on the detection limit. The analytical recovery of MC-LR in the water samples in the icELISA was 94%-110%. Based on this antibody, an immunochromatographic biosensor was developed with a cut-off value of 1 ng/mL, which could satisfy the requirement of the World Health Organization for MC-LR detection in drinking water. This biosensor could be therefore be used as a fast screening tool in the field detection of MC-LR.