1
|
Chen Z, Zhang Z, Wang L, Li Y, Wang Y, Rui Y, Song A, Li M, Xiang Y, Chu K, Jiang L, Tang B, Han N, Wang G, Tian H. Novel nitrogen-doped carbon-coated SnSe 2 based on a post-synthetically modified MOF as a high-performance anode material for LIBs and SIBs. NANOSCALE 2024. [PMID: 39028143 DOI: 10.1039/d4nr02418d] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 07/20/2024]
Abstract
SnSe2 with high theoretical capacity has been identified as an emerging anode candidate for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). However, the rate performance and cycling performance of this material in practical applications are still limited by unavoidable volume expansion and low conductivity. In this work, we designed and synthesized nitrogen-doped carbon-coated SnSe2/C-N composites using 2-aminoterephthalic acid (C8H7NO4) as a nitrogen-containing compound for modification by hydrothermal and vacuum calcination methods to achieve efficient utilization of active sites and optimization of the electronic structure. The carbon skeleton inherited from the Sn-MOF precursor can effectively improve the electronic conduction properties of SnSe2. N-doping in the Sn-MOF can increase the positive and negative electrostatic potential energy regions on the molecular surface to further improve the electrical conductivity, and effectively reduce the binding energy with Li+/Na+ which was determined by Density Functional Theory (DFT) methods. In addition, the N-doped carbon skeleton also introduces a larger space for Li+/Na+ intercalation and enhances the mechanical properties. In particular, the post-synthetically modified MOF-derived SnSe2/C-N materials exhibit excellent cyclability, with a reversible capacity of 695 mA h g-1 for LIBs and 259 mA h g-1 for SIBs after 100 cycles at 100 mA g-1.
Collapse
Affiliation(s)
- Zhiyuan Chen
- College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, Shanghai 201620, People's Republic of China.
| | - Zhe Zhang
- College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, Shanghai 201620, People's Republic of China.
| | - Longzhen Wang
- College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, Shanghai 201620, People's Republic of China.
| | - Yifei Li
- College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, Shanghai 201620, People's Republic of China.
| | - Yiting Wang
- College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, Shanghai 201620, People's Republic of China.
| | - Yichuan Rui
- College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, Shanghai 201620, People's Republic of China.
| | - Ailing Song
- College of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao, China.
| | - Min Li
- Department of Industrial Chemistry, University of Bologna, Viale Risorgimento 4, 40136 Bologna, Italy
| | - Yinyu Xiang
- School of Chemistry, Chemical Engineering and Life Sciences, Wuhan University of Technology, Wuhan 430070, China
| | - Kaibin Chu
- School of Materials Science and Engineering, Linyi University, Linyi, 276000, P. R. China
| | - Lei Jiang
- Department of Chemical Engineering, KU Leuven, Celestijnenlaan 200F, B-3001 Heverlee, Belgium.
| | - Bohejin Tang
- College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, Shanghai 201620, People's Republic of China.
| | - Ning Han
- Department of Materials Engineering, KU Leuven, Leuven, 3001, Belgium
| | - Guoxiu Wang
- Centre for Clean Energy Technology, School of Mathematical and Physical Sciences, Faculty of Science, University of Technology Sydney, Broadway, Sydney, NSW, 2007, Australia.
| | - Hao Tian
- Centre for Clean Energy Technology, School of Mathematical and Physical Sciences, Faculty of Science, University of Technology Sydney, Broadway, Sydney, NSW, 2007, Australia.
| |
Collapse
|
2
|
Wu L, Qi S, Zhang T, Jin Y, Xiao H. One-step carbonization/activation synthesis of chitosan-based porous sheet-like carbon and studies of adsorptive removal for Rhodamine B. Carbohydr Polym 2024; 330:121832. [PMID: 38368087 DOI: 10.1016/j.carbpol.2024.121832] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/12/2023] [Revised: 12/28/2023] [Accepted: 01/13/2024] [Indexed: 02/19/2024]
Abstract
In this work, new N, O-codoped chitosan-derived carbon adsorbents (CKC-x, x refer to the calcination temperature) were synthesized over a simple process of chitosan-KOH aerogel production and simultaneous carbonization/activation of the aerogel. CKC-700 was characterized by sheet-like morphology (even containing a portion of carbon nano-sheet of 3 nm thickness), high porosity and specific surface area (1702.1 m2/g), and pyridinic/pyrrolic/graphitic N groups. The simultaneous carbonization/activation of chitosan-KOH aerogel prepared by top-down coagulation of chitosan aqueous solution by KOH aqueous solution rendered these beneficial characteristics. CKC-700 exhibited a superior adsorption capacity for Rhodamine B (RhB) to other chitosan-derived carbon adsorbents, and the maximum adsorption capacity for RhB of 594 mg/g was achieved at 55 °C. CKC-700 also possessed reasonable reusability for the removal of RhB, and the removal efficiency was still above 95 % in the fifth cycle. The effects of adsorption temperature and time, adsorbent dose, organic dye concentration, and solution pH on the adsorption capacity of CKC-700 were studied. Moreover, the adsorption isotherm, kinetics, thermodynamics, and the adsorption mechanism of RhB on CKC-700 were discussed. In addition, CKC-700 also showed favorable adsorption performance for methylene blue (441 mg/g), methyl orange (457 mg/g), and congo red (500 mg/g) at around 25 °C.
Collapse
Affiliation(s)
- Ling Wu
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Light Industry and Food Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Shuang Qi
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Light Industry and Food Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Tingwei Zhang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Light Industry and Food Engineering, Nanjing Forestry University, Nanjing 210037, China; International Innovation Center for Forest Chemicals and Materials, Nanjing Forestry University, Nanjing 210037, China.
| | - Yongcan Jin
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Light Industry and Food Engineering, Nanjing Forestry University, Nanjing 210037, China; International Innovation Center for Forest Chemicals and Materials, Nanjing Forestry University, Nanjing 210037, China.
| | - Huining Xiao
- Department of Chemical Engineering, University of New Brunswick, Fredericton, NB E3B 5A3, Canada
| |
Collapse
|
3
|
Sun B, Sun Z, Yang Y, Huang XL, Jun SC, Zhao C, Xue J, Liu S, Liu HK, Dou SX. Covalent Organic Frameworks: Their Composites and Derivatives for Rechargeable Metal-Ion Batteries. ACS NANO 2024; 18:28-66. [PMID: 38117556 DOI: 10.1021/acsnano.3c08240] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/21/2023]
Abstract
Covalent organic frameworks (COFs) have attracted considerable interest in the field of rechargeable batteries owing to their three-dimensional (3D) varied pore sizes, inerratic porous structures, abundant redox-active sites, and customizable structure-adjustable frameworks. In the context of metal-ion batteries, these materials play a vital role in electrode materials, effectively addressing critical issues such as low ionic conductivity, limited specific capacity, and unstable structural integrity. However, the electrochemical characteristics of the developed COFs still fall short of practical battery requirements due to inherent issues such as low electronic conductivity, the tradeoff between capacity and redox potential, and unfavorable micromorphology. This review provides a comprehensive overview of the recent advancements in the application of COFs, COF-based composites, and their derivatives in rechargeable metal-ion batteries, including lithium-ion, lithium-sulfur, sodium-ion, sodium-sulfur, potassium-ion, zinc-ion, and other multivalent metal-ion batteries. The operational mechanisms of COFs, COF-based composites, and their derivatives in rechargeable batteries are elucidated, along with the strategies implemented to enhance the electrochemical properties and broaden the range of their applications.
Collapse
Affiliation(s)
- Bowen Sun
- Key Lab for Special Functional Materials of Ministry of Education, School of Materials Science and Engineering, Henan University, Kaifeng 475004, People's Republic of China
| | - Zixu Sun
- Key Lab for Special Functional Materials of Ministry of Education, School of Materials Science and Engineering, Henan University, Kaifeng 475004, People's Republic of China
| | - Yi Yang
- Key Lab for Special Functional Materials of Ministry of Education, School of Materials Science and Engineering, Henan University, Kaifeng 475004, People's Republic of China
| | - Xiang Long Huang
- Institute of Energy Materials Science, University of Shanghai for Science and Technology, Shanghai 200093, People's Republic of China
| | - Seong Chan Jun
- School of Mechanical Engineering, Yonsei University, Seoul 120-749, South Korea
| | - Chongchong Zhao
- Henan Key Laboratory of Energy Storage Materials and Processes, Zhengzhou Institute of Emerging Industrial Technology, Zhengzhou 450003, People's Republic of China
| | - Jiaojiao Xue
- Key Lab for Special Functional Materials of Ministry of Education, School of Materials Science and Engineering, Henan University, Kaifeng 475004, People's Republic of China
| | - Shude Liu
- College of Textiles, Donghua University, Shanghai 201620, People's Republic of China
| | - Hua Kun Liu
- Institute of Energy Materials Science, University of Shanghai for Science and Technology, Shanghai 200093, People's Republic of China
- Institute for Superconducting and Electronic Materials, University of Wollongong,Wollongong, New South Wales 2522, Australia
| | - Shi Xue Dou
- Institute of Energy Materials Science, University of Shanghai for Science and Technology, Shanghai 200093, People's Republic of China
- Institute for Superconducting and Electronic Materials, University of Wollongong,Wollongong, New South Wales 2522, Australia
| |
Collapse
|
4
|
Zhao L, Zhang H, Ma B. Formation of Carbon-Incorporated NiO@Co 3O 4 Nanostructures via a Direct Calcination Method and Their Application as Battery-Type Electrodes for Hybrid Supercapacitors. ACS OMEGA 2023; 8:10503-10511. [PMID: 36969468 PMCID: PMC10034999 DOI: 10.1021/acsomega.3c00254] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/13/2023] [Accepted: 03/01/2023] [Indexed: 06/18/2023]
Abstract
Nickel and cobalt oxides are promising electrode materials for supercapacitors, but their poor conductivity and sluggish kinetics seriously hinder their application. Herein, a simple one-step calcination method was proposed to prepare carbon-incorporated NiO@Co3O4 (denoted as CNC) using a NiCo Prussian blue analogue (NiCo-PBA) as a precursor. The effect of calcination temperature on the electrochemical behavior of CNC was investigated. Benefiting from the relatively large specific surface area and porous structure characteristics, when used as an electrode for supercapacitors, the CNC obtained at 400 °C shows the typical features of a battery-type electrode, with a good specific capacitance of 208.5 F g-1 at 1 A g-1 and a rate capability of 70.8% at 30 A g-1. The hybrid supercapacitor (HSC) constructed with the optimum CNC electrode can provide a high energy density of 32.6 Wh kg-1 at the corresponding power density of 750.0 W kg-1 and an excellent cycling stability of 87.1% over 5000 cycles. This study provides a simple calcination method for preparing MOF-derived high-conductivity mixed metal oxide electrode materials for supercapacitors.
Collapse
Affiliation(s)
- Lichen Zhao
- School
of Engineering and Computer Science, Oakland
University, Michigan 48309, United States
| | - Huifang Zhang
- College
of Mechatronics Engineering, North University
of China, Taiyuan 030051, P. R. China
| | - Boxiang Ma
- College
of Mechatronics Engineering, North University
of China, Taiyuan 030051, P. R. China
| |
Collapse
|
5
|
Hierarchical porous Co-CoO@NC hollow microspheres with capacity growth by reactivation of solid-electrolyte interface films. J Colloid Interface Sci 2023; 640:829-838. [PMID: 36905892 DOI: 10.1016/j.jcis.2023.02.139] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/09/2022] [Revised: 02/18/2023] [Accepted: 02/25/2023] [Indexed: 03/06/2023]
Abstract
Transition metal oxide (TMO)-based electrodes exhibit increased capacities, yet the mechanism behind the true cause of capacity in such materials remains unclear. Herein, hierarchical porous and hollow Co-CoO@NC spheres assembled by nanorods with refined nanoparticles and amorphous carbon have been synthesized by a two-step annealing approach. A temperature gradient-driven mechanism is revealed for the evolution of the hollow structure. Compared with the solid CoO@NC spheres, the novel hierarchical of Co-CoO@NC can fully utilize the interior active material by exposing both ends of each nanorod into electrolyte. The hollow interior provides extra space for the volume variation, leading to an up-trend capacity of 919.3 mAh g-1 at 200 mA g-1 over 200 cycles. Differential capacity curves disclose that solid electrolyte interface (SEI) films reactivation partly contributes to increasing reversible capacity. The introduction of nanosized Co particles benefits the process by participating in the transformation of SEI components. This study provides a guide for constructing anodic material with exceptional electrochemical performance.
Collapse
|
6
|
Mohtasham H, Rostami M, Gholipour B, Sorouri AM, Ehrlich H, Ganjali MR, Rostamnia S, Rahimi-Nasrabadi M, Salimi A, Luque R. Nano-architecture of MOF (ZIF-67)-based Co 3O 4 NPs@N-doped porous carbon polyhedral nanocomposites for oxidative degradation of antibiotic sulfamethoxazole from wastewater. CHEMOSPHERE 2023; 310:136625. [PMID: 36181853 DOI: 10.1016/j.chemosphere.2022.136625] [Citation(s) in RCA: 14] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/30/2022] [Revised: 09/11/2022] [Accepted: 09/25/2022] [Indexed: 06/16/2023]
Abstract
Co3O4 NPs in N-doped porous carbon (Co3O4 NPs@N-PC) materials were prepared by one-pot pyrolysis of a ZIF-67 powder under N2 atmosphere and followed by oxidation under air atmosphere (200 °C) toward promotion catalytic activity and activation of peroxymonosulfate (PMS) to degradation sulfamethoxazole (SMZ). 2-methylimidazole was used as a nitrogen source and a competitive ligand for the synthesis of Co3O4 NPs@N-PC, which in addition to affecting nucleation and growth of the crystal, promotes the production of active Co-N sites. Co3O4 NPs@N-PC nano-architecture has high specific surface areas (250 m2 g-1) and is a non-toxic, effective and stable PMS activator. The effect of operating parameters including SMZ concentration, catalyst dosage, temperature and pH in the presence of Co3O4 NPs@N-PC was investigated. The Co3O4 NPs@N-PC composite showed superior performance in activating PMS over a wide range of pH (2-10) and different temperatures so that complete degradation of SMZ (50 μM, 100 mL) was achieved within 15 min. The role of Co2+/Co3+ redox system in the mechanism before and after PMS activation was determined using XPS analysis. Surface-generated radicals led to the degradation of SMZ, in which the SMZ degradation rate attained 0.21 min-1 with the mineralization of 36.8%. The feasible degradation mechanism of SMZ was studied in the presence of different scavengers and it was revealed that the degradation reaction proceeds from the radical/non-radical pathway and in this process most of the SO4- and OH radicals are dominant. The recoverability and reuse of Co3O4 NPs@N-PC were evaluated to confirm its stability and potential for SMZ degradation and it was observed that the catalyst maintains its catalytic power for at least 5 cycles.
Collapse
Affiliation(s)
- Hamed Mohtasham
- Chemical Injuries Research Center, Systems Biology and Poisonings Institute, Baqiyatallah University of Medical Sciences, Tehran, Iran; Department of Chemistry, University of Kurdistan, 66177-15175, Sanandaj, Iran; Faculty of Pharmacy, Baqiyatallah University of Medical Sciences, Tehran, Iran
| | - Mojtaba Rostami
- School of Chemistry, College of Science, University of Tehran, Tehran, Iran
| | - Behnam Gholipour
- Organic and Nano Group (ONG), Department of Chemistry, Iran University of Science and Technology (IUST), PO Box 16846-13114, Tehran, Iran
| | - Amir Mohammad Sorouri
- Islamic Azad University, Science & Research Branch-Tehran, Faculty of Veterinary Science, Tehran, Iran
| | - Hermann Ehrlich
- Institute of Electronic and Sensor Materials, TU Bergakademie Freiberg, 09599, Freiberg, Germany; Center for Advanced Technology, Adam Mickiewicz University, 61614, Poznan, Poland
| | - Mohmmad Reza Ganjali
- Center of Excellence in Electrochemistry, School of Chemistry, College of Science, University of Tehran, Tehran, Iran
| | - Sadegh Rostamnia
- Organic and Nano Group (ONG), Department of Chemistry, Iran University of Science and Technology (IUST), PO Box 16846-13114, Tehran, Iran.
| | - Mehdi Rahimi-Nasrabadi
- Chemical Injuries Research Center, Systems Biology and Poisonings Institute, Baqiyatallah University of Medical Sciences, Tehran, Iran; Institute of Electronic and Sensor Materials, TU Bergakademie Freiberg, 09599, Freiberg, Germany; Faculty of Pharmacy, Baqiyatallah University of Medical Sciences, Tehran, Iran.
| | - Abdollah Salimi
- Department of Chemistry, University of Kurdistan, 66177-15175, Sanandaj, Iran.
| | - Rafael Luque
- Departamento de Química Orgánica, Universidad de Córdoba, Campus de Rabanales, Edificio Marie Curie (C-3), Ctra Nnal IV-A, Km 396, E14014, Cordoba, Spain; Peoples Friendship University of Russia (RUDN University), 6 Miklukho Maklaya str., 117198, Moscow, Russia
| |
Collapse
|
7
|
Sun Q, Yang X, Shu T, Yang X, Qiao M, Wang D, Liu Z, Li X, Rao J, Zhang Y, Yang P, Yao K. In Situ Synthesis of C-N@NiFe 2O 4@MXene/Ni Nanocomposites for Efficient Electromagnetic Wave Absorption at an Ultralow Thickness Level. MOLECULES (BASEL, SWITZERLAND) 2022; 28:molecules28010233. [PMID: 36615427 PMCID: PMC9822367 DOI: 10.3390/molecules28010233] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/28/2022] [Revised: 12/20/2022] [Accepted: 12/21/2022] [Indexed: 12/29/2022]
Abstract
Recently, the development of composite materials composed of magnetic materials and MXene has attracted significant attention. However, the thickness and microwave absorption performance of the composite is still barely satisfactory. In this work, the C-N@NiFe2O4@MXene/Ni nanocomposites were successfully synthesized in situ by hydrothermal and calcination methods. Benefiting from the introduction of the carbon-nitrogen(C-N) network structure, the overall dielectric properties are improved effectively, consequently reducing the thickness of the composite while maintaining excellent absorption performance. As a result, the minimum reflection loss of C-N@NiFe2O4@MXene/Ni can reach -50.51 dB at 17.3 GHz at an ultralow thickness of 1.5 mm, with an effective absorption bandwidth of 4.95 GHz (13.02-18 GHz). This research provides a novel strategy for materials to maintain good absorption performance at an ultralow thickness level.
Collapse
Affiliation(s)
- Qing Sun
- Multi-Scale Porous Materials Center, Institute of Advanced Interdisciplinary Studies, School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China
| | - Xin Yang
- Multi-Scale Porous Materials Center, Institute of Advanced Interdisciplinary Studies, School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China
| | - Tie Shu
- Multi-Scale Porous Materials Center, Institute of Advanced Interdisciplinary Studies, School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China
| | - Xianfeng Yang
- State Key Laboratory of Photon-Technology in Western China Energy, School of Physics, Northwest University, Xi’an 710127, China
| | - Min Qiao
- Multi-Scale Porous Materials Center, Institute of Advanced Interdisciplinary Studies, School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China
| | - Dashuang Wang
- College of Material Science and Engineering, Chongqing University, Chongqing 400044, China
| | - Zhaohui Liu
- Multi-Scale Porous Materials Center, Institute of Advanced Interdisciplinary Studies, School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China
- Correspondence: (Z.L.); (K.Y.)
| | - Xinghua Li
- State Key Laboratory of Photon-Technology in Western China Energy, School of Physics, Northwest University, Xi’an 710127, China
| | - Jinsong Rao
- College of Material Science and Engineering, Chongqing University, Chongqing 400044, China
| | - Yuxin Zhang
- College of Material Science and Engineering, Chongqing University, Chongqing 400044, China
| | - Pingan Yang
- School of Automation, Chongqing University of Posts and Telecommunications, Chongqing 400065, China
| | - Kexin Yao
- Multi-Scale Porous Materials Center, Institute of Advanced Interdisciplinary Studies, School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China
- Correspondence: (Z.L.); (K.Y.)
| |
Collapse
|
8
|
Wang J, Zhang L, Jin F, Chen X. Palladium nanoparticles on chitin-derived nitrogen-doped carbon materials for carbon dioxide hydrogenation into formic acid. RSC Adv 2022; 12:33859-33869. [PMID: 36505688 PMCID: PMC9693910 DOI: 10.1039/d2ra06462f] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/13/2022] [Accepted: 11/21/2022] [Indexed: 11/27/2022] Open
Abstract
Utilizing waste carbon resources to produce chemicals and materials is beneficial to mitigate the fossil fuel consumption and the global warming. In this study, ocean-based chitin biomass and waste shrimp shell powders were employed as the feedstock to prepare Pd loaded nitrogen-doped carbon materials as the catalysts for carbon dioxide (CO2)/bicarbonate hydrogenation into formic acid, which simultaneously converts waste biomass into useful materials and CO2 into a valuable chemical. Three different preparation methods were examined, and the two-stage calcination was the most efficient one to obtain N-doped carbon material with good physicochemical properties as the best Pd support. The highest formic acid yield was achieved of ∼77% at 100 °C in water with KHCO3 substrate under optimal condition with a TON of 610. The nitrogen content and N functionalities of the as-synthesized carbon materials were crucial which could serve as anchor sites for the Pd precursor and assist the formation of well-dispersed and small-sized Pd NPs for boosted catalytic activity. The study puts forward a facile, inexpensive and environmentally benign way for simultaneous valorization of oceanic waste biomass and carbon dioxide into valuable products.
Collapse
Affiliation(s)
- Jingyu Wang
- China-UK Low Carbon College, Shanghai Jiao Tong University3 Yinlian Rd201306ShanghaiChina
| | - Lei Zhang
- China-UK Low Carbon College, Shanghai Jiao Tong University3 Yinlian Rd201306ShanghaiChina
| | - Fangming Jin
- China-UK Low Carbon College, Shanghai Jiao Tong University3 Yinlian Rd201306ShanghaiChina,School of Environmental Science and Engineering, Shanghai Jiao Tong University201306ShanghaiChina
| | - Xi Chen
- China-UK Low Carbon College, Shanghai Jiao Tong University3 Yinlian Rd201306ShanghaiChina
| |
Collapse
|
9
|
Chen J, Xia X, Li P, Yu H, Xie Y, Guo Y, Yao W, Qian H, Cheng Y. A facile “off-on” fluorescence sensor for pentachlorophenol detection based on natural N and S co-doped carbon dots from crawfish shells. Food Chem 2022; 405:134802. [DOI: 10.1016/j.foodchem.2022.134802] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/09/2022] [Revised: 10/17/2022] [Accepted: 10/27/2022] [Indexed: 11/05/2022]
|
10
|
Tian L, Xie Y, Lu J, Hu Q, Xiao Y, Liu T, Davronbek B, Zhu X, Su X. Self-assembled 3D Fe3O4/N-Doped graphene aerogel composite for large and fast lithium storage with an excellent cycle performance. J Electroanal Chem (Lausanne) 2022. [DOI: 10.1016/j.jelechem.2022.116763] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/27/2022]
|
11
|
Zhang W, Li X, Jin Y, Chen G, Li Y, Zeng S. Nano-Co3O4 anchored helical carbon nanofibers as an anode material for Li-ion batteries. J Electroanal Chem (Lausanne) 2022. [DOI: 10.1016/j.jelechem.2022.116730] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
12
|
Yang X, Shu T, Yang X, Qiao M, Wang D, Li X, Rao J, Liu Z, Zhang Y, Yang P, Yao K. MOFs-Derived Three-Phase Microspheres: Morphology Preservation and Electromagnetic Wave Absorption. MOLECULES (BASEL, SWITZERLAND) 2022; 27:molecules27154773. [PMID: 35897949 PMCID: PMC9332212 DOI: 10.3390/molecules27154773] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/18/2022] [Revised: 07/13/2022] [Accepted: 07/20/2022] [Indexed: 11/16/2022]
Abstract
Reasonable structural design and composition control are the dominant factors for tuning the electromagnetic absorbing properties of materials. In this paper, microspheres composed of NiO, Ni, and Co3O4 nanoparticles (NCMO) were successfully synthesized using a mild oxidation method. Benefiting from the multi-component composition and a unique microstructure, the RLmin of CNMO can reach −46.8 dB at 17 GHz, with an effective absorption bandwidth of 4.1 GHz (13.9–18 GHz). The absorbing properties and the absorbing mechanism analysis showed that the microsphere-structured NCMO composed of multi-component nanoparticles enhanced the interface polarization, thereby improving the absorption performance. This research provides a new avenue for MOF-derived oxide materials with excellent electromagnetic wave absorbing properties.
Collapse
Affiliation(s)
- Xin Yang
- Multi-Scale Porous Materials Center, Institute of Advanced Interdisciplinary Studies & School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China; (X.Y.); (T.S.); (M.Q.); (Z.L.)
| | - Tie Shu
- Multi-Scale Porous Materials Center, Institute of Advanced Interdisciplinary Studies & School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China; (X.Y.); (T.S.); (M.Q.); (Z.L.)
| | - Xianfeng Yang
- State Key Laboratory of Photon-Technology in Western China Energy, School of Physics, Northwest University, Xi’an 710127, China; (X.Y.); (X.L.)
| | - Min Qiao
- Multi-Scale Porous Materials Center, Institute of Advanced Interdisciplinary Studies & School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China; (X.Y.); (T.S.); (M.Q.); (Z.L.)
| | - Dashuang Wang
- College of Material Science and Engineering, Chongqing University, Chongqing 400044, China; (D.W.); (Y.Z.)
| | - Xinghua Li
- State Key Laboratory of Photon-Technology in Western China Energy, School of Physics, Northwest University, Xi’an 710127, China; (X.Y.); (X.L.)
| | - Jinsong Rao
- College of Material Science and Engineering, Chongqing University, Chongqing 400044, China; (D.W.); (Y.Z.)
- Correspondence: (J.R.); (K.X.Y.)
| | - Zhaohui Liu
- Multi-Scale Porous Materials Center, Institute of Advanced Interdisciplinary Studies & School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China; (X.Y.); (T.S.); (M.Q.); (Z.L.)
| | - Yuxin Zhang
- College of Material Science and Engineering, Chongqing University, Chongqing 400044, China; (D.W.); (Y.Z.)
| | - Pingan Yang
- School of Automation, Chongqing University of Posts and Telecommunications, Chongqing 400065, China;
| | - Kexin Yao
- Multi-Scale Porous Materials Center, Institute of Advanced Interdisciplinary Studies & School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China; (X.Y.); (T.S.); (M.Q.); (Z.L.)
- Correspondence: (J.R.); (K.X.Y.)
| |
Collapse
|
13
|
Wheat-like Co3O4 on carbon derived from silk as anode materials for enhanced lithium storage. Colloids Surf A Physicochem Eng Asp 2022. [DOI: 10.1016/j.colsurfa.2022.129786] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
|
14
|
Singhbabu YN, Didwal PN, Jang K, Jang J, Park C, Ham M. Green Synthesis of a Reduced‐Graphene‐Oxide Wrapped Nickel Oxide Nano‐Composite as an Anode For High‐Performance Lithium‐Ion Batteries. ChemistrySelect 2022. [DOI: 10.1002/slct.202200676] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Affiliation(s)
- Yashabanta N. Singhbabu
- Department of Material Science Maharaja Sriram Chandra Bhanja Deo University Keonjhar campus Keonjhar Odisha 757003 India
| | - Pravin N. Didwal
- Department of Materials University of Oxford Parks Road Oxford OX1 3PH United Kingdom
| | - Kyunghoon Jang
- School of Earth Sciences and Environmental Engineering Gwangju Institute of Science and Technology 123 Cheomdangwagi-ro, Buk-gu Gwangju 61005 South Korea
| | - Jaewon Jang
- School of Earth Sciences and Environmental Engineering Gwangju Institute of Science and Technology 123 Cheomdangwagi-ro, Buk-gu Gwangju 61005 South Korea
| | - Chan‐Jin Park
- Department of Materials Science and Engineering Chonnam National University 77, Yongbong-ro, Buk-gu Gwangju 61186 South Korea
| | - Moon‐Ho Ham
- School of Material Science and Engineering Gwangju Institute of Science and Technology 123 Cheomdangwagi-ro, Buk-gu Gwangju 61005 South Korea
| |
Collapse
|
15
|
Rehman AU, Fayaz M, Lv H, Liu Y, Zhang J, Wang Y, Du L, Wang R, Shi K. Controllable Synthesis of a Porous PEI-Functionalized Co 3O 4/rGO Nanocomposite as an Electrochemical Sensor for Simultaneous as Well as Individual Detection of Heavy Metal Ions. ACS OMEGA 2022; 7:5870-5882. [PMID: 35224348 PMCID: PMC8867791 DOI: 10.1021/acsomega.1c05989] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/26/2021] [Accepted: 01/27/2022] [Indexed: 06/14/2023]
Abstract
The present study focuses on the strategy of employing an electrochemical sensor with a porous polyethylenimine (PEI)-functionalized Co3O4/reduced graphene oxide (rGO) nanocomposite (NCP) to detect heavy metal ions (HMIs: Cd2+, Pb2+, Cu2+, and Hg2+). The porous PEI-functionalized Co3O4/rGO NCP (rGO·Co3O4·PEI) was prepared via a hydrothermal method. The synthesized NCP was based on a conducting polymer PEI, rGO, nanoribbons of Co3O4, and highly dispersed Co3O4 nanoparticles (NPs), which have shown excellent performance in the detection of HMIs. The as-prepared PEI-functionalized rGO·Co3O4·PEI NCP-modified electrode was used for the sensing/detection of HMIs by means of both square wave anodic stripping voltammetry (SWV) and differential normal pulse voltammetry (DNPV) methods for the first time. Both methods were employed for the simultaneous detection of HMIs, whereas SWV was employed for the individual analysis as well. The limits of detection (LOD; 3σ method) for Cd2+, Pb2+, Cu2+, and Hg2+ determined using the rGO·Co3O4·PEI NCP-modified electrode were 0.285, 1.132, 1.194, and 1.293 nM for SWV, respectively. Similarly, LODs of Cd2+, Pb2+, Cu2+, and Hg2+ were 1.069, 0.285, 2.398, and 1.115 nM, respectively, by DNPV during simultaneous analysis, whereas they were 0.484, 0.878, 0.462, and 0.477 nM, respectively, by SWV in individual analysis.
Collapse
Affiliation(s)
- Afrasiab Ur Rehman
- Department
of Chemistry, Khushal Khan Khattak University,
Karak, 27200 Karak, Khyber Pakhtunkhawa, Pakistan
- Key
Laboratory of Functional Inorganic Material Chemistry, Ministry of
Education. School of Chemistry and Material Science, Heilongjiang University, Harbin 150080, P. R. China
| | - Muhammad Fayaz
- Department
of Chemistry, Khushal Khan Khattak University,
Karak, 27200 Karak, Khyber Pakhtunkhawa, Pakistan
| | - He Lv
- Key
Laboratory of Functional Inorganic Material Chemistry, Ministry of
Education. School of Chemistry and Material Science, Heilongjiang University, Harbin 150080, P. R. China
| | - Yang Liu
- Key
Laboratory of Functional Inorganic Material Chemistry, Ministry of
Education. School of Chemistry and Material Science, Heilongjiang University, Harbin 150080, P. R. China
| | - Jiawei Zhang
- Modern
Experiment Center, Harbin Normal University, Harbin 150025, P. R. China
| | - Yang Wang
- Key
Laboratory of Functional Inorganic Material Chemistry, Ministry of
Education. School of Chemistry and Material Science, Heilongjiang University, Harbin 150080, P. R. China
| | - Lijuan Du
- Modern
Experiment Center, Harbin Normal University, Harbin 150025, P. R. China
| | - Ruihong Wang
- Key
Laboratory of Functional Inorganic Material Chemistry, Ministry of
Education. School of Chemistry and Material Science, Heilongjiang University, Harbin 150080, P. R. China
| | - Keying Shi
- Key
Laboratory of Functional Inorganic Material Chemistry, Ministry of
Education. School of Chemistry and Material Science, Heilongjiang University, Harbin 150080, P. R. China
| |
Collapse
|
16
|
Cong L, Zhu H, Zhang S, Xing Y, Xia J, Meng X, Yang P. Co3O4 Anchored on Ionic Liquid Modified PAN as Anode Materials for Flexible Lithium-ion Batteries. J Electroanal Chem (Lausanne) 2022. [DOI: 10.1016/j.jelechem.2022.116105] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
17
|
Jeong Y, Park J, Lee S, Oh SH, Kim WJ, Ji YJ, Park GY, Seok D, Shin WH, Oh JM, Lee T, Park C, Seubsai A, Sohn H. Iron oxide-carbon nanocomposites modified by organic ligands: Novel pore structure design of anode materials for lithium-ion batteries. J Electroanal Chem (Lausanne) 2022. [DOI: 10.1016/j.jelechem.2021.115905] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
18
|
Zheng G, Yin J, Guo Z, Tian S, Yang X. Embedding Cobalt Into ZIF-67 to Obtain Cobalt-Nanoporous Carbon Composites as Electrode Materials for Lithium ion Battery. J ELECTROCHEM SCI TE 2021. [DOI: 10.33961/jecst.2020.01473] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
Abstract
Lithium ion batteries (LIBs) is a kind of rechargeable secondary battery, developed from lithium battery, lithium ions move between the positive and negative electrodes to realize the charging and discharging of external circuits. Zeolitic imidazolate frameworks (ZIFs) are porous crystalline materials in which organic imidazole esters are cross-linked to transition metals to form a framework structure. In this article, ZIF-67 is used as a sacrificial template to prepare nano porous carbon (NPC) coated cobalt nanoparticles. The final product Co/NPC composites with complete structure, regular morphology and uniform size were obtained by this method. The conductive network of cobalt and nitrogen doped carbon can shorten the lithium ion transport path and present high conductivity. In addition, amorphous carbon has more pores that can be fully in contact with the electrolyte during charging and discharging. At the same time, it also reduces the volume expansion during the cycle and slows down the rate of capacity attenuation caused by structure collapse. Co/NPC composites first discharge specific capacity up to 3115 mA h/g, under the current density of 200 mA/g, circular 200 reversible capacity as high as 751.1 mA h/g, and the excellent rate and resistance performance. The experimental results show that the Co/NPC composite material improves the electrical conductivity and electrochemical properties of the electrode. The cobalt based ZIF-67 as the precursor has opened the way for the design of highly performance electrodes for energy storage and electrochemical catalysis.
Collapse
|
19
|
Sustainable Materials from Fish Industry Waste for Electrochemical Energy Systems. ENERGIES 2021. [DOI: 10.3390/en14237928] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
Abstract
Fish industry waste is attracting growing interest for the production of environmentally friendly materials for several different applications, due to the potential for reduced environmental impact and increased socioeconomic benefits. Recently, the application of fish industry waste for the synthesis of value-added materials and energy storage systems represents a feasible route to strengthen the overall sustainability of energy storage product lines. This review focused on an in-depth outlook on the advances in fish byproduct-derived materials for energy storage devices, including lithium-ion batteries (LIBs), sodium-ion (NIBs) batteries, lithium-sulfur batteries (LSBs), supercapacitors and protein batteries. For each of these, the latest applications were presented together with approaches to improve the electrochemical performance of the obtained materials. By analyzing the recent literature on this topic, this review aimed to contribute to further advances in the sustainability of energy storage devices.
Collapse
|
20
|
He H, Fu C, An Y, Feng J, Xiao J. Biofunctional hollow γ-MnO 2 microspheres by a one-pot collagen-templated biomineralization route and their applications in lithium batteries. RSC Adv 2021; 11:37040-37048. [PMID: 35496386 PMCID: PMC9043605 DOI: 10.1039/d1ra06899g] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/14/2021] [Accepted: 11/08/2021] [Indexed: 12/03/2022] Open
Abstract
γ-MnO2 nanomaterials play an essential role in the development of advanced electrochemical energy storage and conversion devices with versatile industrial applications. Herein, novel dandelion-like hollow microspheres of γ-MnO2 mesocrystals have been fabricated for the first time by a one-pot biomineralization route. Recombinant collagen with unique rod-like structure has been demonstrated as a robust template to tune the morphologies of γ-MnO2 mesocrystals, and a very low concentration of collagen can alter the nanostructures of γ-MnO2 from nanorods to microspheres. The as-prepared γ-MnO2 mesocrystals formed well-ordered hollow microspheres composed of delicate nanoneedle-like units. Among all the reported γ-MnO2 with various nanostructures, the γ-MnO2 microspheres showed the most prowess to maintain high discharge capacities after 100+ cycles. The superior electrochemical performance of γ-MnO2 likely results from its unique hierarchical micro-nano structure. Notably, the γ-MnO2 mesocrystals display high biocompatibility and cellular activity. Collagen plays a key dual role in mediating the morphology as well as endowing the biofunction of the γ-MnO2 mesocrystals. This environmentally friendly biomineralization approach using rod-like collagen as the template, provides unprecedented opportunity for the production of novel nanostructured metal oxides with superior biocompatibility and electrochemical performance, which have great potential in advanced implantable and wearable health-care electronic devices. Recombinant collagen with unique rod-like structure has been demonstrated as a robust template to create novel dandelion-like hollow microspheres of γ-MnO2 mesocrystals, which display superior biocompatibility and electrochemical performance.![]()
Collapse
Affiliation(s)
- Huixia He
- State Key Laboratory of Applied Organic Chemistry, Key Laboratory of Nonferrous Metal Chemistry and Resources Utilization of Gansu Province, College of Chemistry and Chemical Engineering, Lanzhou University Lanzhou 730000 China
| | - Caihong Fu
- State Key Laboratory of Applied Organic Chemistry, Key Laboratory of Nonferrous Metal Chemistry and Resources Utilization of Gansu Province, College of Chemistry and Chemical Engineering, Lanzhou University Lanzhou 730000 China
| | - Yongling An
- School of Chemistry and Chemical Engineering, Shandong University Jinan 250100 China
| | - Jinkui Feng
- School of Chemistry and Chemical Engineering, Shandong University Jinan 250100 China
| | - Jianxi Xiao
- State Key Laboratory of Applied Organic Chemistry, Key Laboratory of Nonferrous Metal Chemistry and Resources Utilization of Gansu Province, College of Chemistry and Chemical Engineering, Lanzhou University Lanzhou 730000 China
| |
Collapse
|
21
|
Ma X, Ji C, Yu X, Liu Y, Xiong X. A Covalent Heterostructure of Metal Phosphide Quantum Dots Anchored in N, P Co-doped Carbon Nanocapsules for Fast and Durable Lithium Storage. ACS APPLIED MATERIALS & INTERFACES 2021; 13:53965-53973. [PMID: 34738807 DOI: 10.1021/acsami.1c16730] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Transition-metal phosphides (TMPs) anodes for lithium ion batteries (LIBs) usually show poor rate capability and rapid capacity degradation owing to their low electronic conductivities, huge volumetric changes, as well as inferior reversibility of the discharge product Li3P. Herein, a covalent heterostructure with TMPs quantum dots anchored in N, P co-doped carbon nanocapsules (NPC) has been prepared in which the P element in TMPs is simultaneously doped into the carbon matrix. As a proof of concept, Co2P quantum dots covalently anchored in NPC (Co2P QDs/NPC) is prepared and evaluated as an anode for LIBs. The Co2P QDs/NPC electrode not only demonstrates a high capacity and an extraordinary rate performance but also delivers an impressive cyclability with a high capacity retention of 102.5% after 1600 cycles, one of the best reported values for TMPs-based electrode materials for LIBs. The covalent heterostructure can facilitate the electron/ion transfer and maintain the structural stability during the intensive cycles. Moreover, density functional theory calculations demonstrate that the interfacial covalent coupling can enhance the electrochemical reversibility of the discharge product Li3P in the charge processes via lowering the conversion reaction energies. This work presents an effective interfacial engineering strategy for developing high-performance TMPs anodes for advanced LIBs.
Collapse
Affiliation(s)
- Xiangdong Ma
- Guangzhou Key Laboratory of Surface Chemistry of Energy Materials, New Energy Research Institute, School of Environment and Energy, South China University of Technology, Guangzhou 510006, P.R. China
| | - Chuang Ji
- Guangzhou Key Laboratory of Surface Chemistry of Energy Materials, New Energy Research Institute, School of Environment and Energy, South China University of Technology, Guangzhou 510006, P.R. China
| | - Xiaoyuan Yu
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, Guangzhou, Guangdong 510642, China
| | - Yike Liu
- School of Material and Energy Engineering, Guizhou Institute of Technology, Guiyang 550003, China
| | - Xunhui Xiong
- Guangzhou Key Laboratory of Surface Chemistry of Energy Materials, New Energy Research Institute, School of Environment and Energy, South China University of Technology, Guangzhou 510006, P.R. China
| |
Collapse
|
22
|
Yun WH, Das G, Kim B, Park BJ, Yoon HH, Yoon YS. Ni-Fe phosphide deposited carbon felt as free-standing bifunctional catalyst electrode for urea electrolysis. Sci Rep 2021; 11:22003. [PMID: 34754002 PMCID: PMC8578333 DOI: 10.1038/s41598-021-01383-3] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/26/2021] [Accepted: 10/22/2021] [Indexed: 11/16/2022] Open
Abstract
A free-standing catalyst electrode for the urea oxidation reaction (UOR) and hydrogen evolution reaction (HER) in a urea electrolysis cell was synthesized by electroplating a Ni-Fe alloy onto carbon felt, followed by phosphidation (P-NiFe@CF). The prepared P-NiFe@CF catalyst consisted of Ni5P4, NiP2, and FeP with 3D flower-like P-NiFe architecture on CF. P-NiFe@CF exhibited excellent electrocatalytic activity for the UOR (demanding only 1.39 V (vs. RHE) to achieve 200 mA cm-2), and for the HER with a low overpotential of 0.023 V (vs. RHE) at 10 mA cm-2, indicating its feasibility as a bifunctional catalyst electrode for urea electrolysis. A urea electrolysis cell with P-NiFe@CF as both the free-standing anode and cathode generated a current density of 10 mA cm-2 at a cell potential of 1.37 V (vs. RHE), which is considerably lower than that of water electrolysis, and also lower than previously reported values. The results indicate that the P-NiFe@CF catalyst electrodes can be used as free-standing bifunctional electrodes for urea electrolyzers.
Collapse
Affiliation(s)
- Woo Hyun Yun
- Department of Chemical and Biological Engineering, Gachon University, Seongnam, Gyeonggi-do, 461-701, Republic of Korea
| | - Gautam Das
- Department of Polymer Science and Engineering, Kyungpook National University, Sangyeok-dong, Buk-gu, Daegu, Korea
| | - Bohyeon Kim
- Department of Chemical and Biological Engineering, Gachon University, Seongnam, Gyeonggi-do, 461-701, Republic of Korea
| | - Bang Ju Park
- Department of Electronic Engineering, Gachon University, Seongnam, Gyeonggi-do, 461-701, Republic of Korea
| | - Hyon Hee Yoon
- Department of Chemical and Biological Engineering, Gachon University, Seongnam, Gyeonggi-do, 461-701, Republic of Korea.
| | - Young Soo Yoon
- Department of Materials Science and Engineering, Gachon University, Seongnam, Gyeonggi-do, 461-701, Republic of Korea.
| |
Collapse
|
23
|
Su Q, Rong Y, Chen H, Wu J, Yang Z, Deng L, Fu Z. Carbon-Doped Vanadium Nitride Used as a Cathode of High-Performance Aqueous Zinc Ion Batteries. Ind Eng Chem Res 2021. [DOI: 10.1021/acs.iecr.1c01915] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
Affiliation(s)
- Qingsong Su
- Hunan Province Key Laboratory of Chemical Power Source, College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China
| | - Yao Rong
- Hunan Province Key Laboratory of Chemical Power Source, College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China
| | - Hongzhe Chen
- Hunan Province Key Laboratory of Chemical Power Source, College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China
| | - Jian Wu
- Hunan Province Key Laboratory of Chemical Power Source, College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China
| | - Zhanhong Yang
- Hunan Province Key Laboratory of Chemical Power Source, College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China
- Innovation Base of Energy and Chemical Materials for Graduate Students Training, Central South University, Changsha 410083, China
| | - Lie Deng
- Hunan Province Key Laboratory of Chemical Power Source, College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China
| | - Zhimin Fu
- Hunan Province Key Laboratory of Chemical Power Source, College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China
| |
Collapse
|
24
|
Liu Z, Yu M, Wang X, Lai F, Wang C, Yu N, Sun H, Geng B. Sandwich shelled TiO 2@Co 3O 4@Co 3O 4/C hollow spheres as anode materials for lithium ion batteries. Chem Commun (Camb) 2021; 57:1786-1789. [PMID: 33475097 DOI: 10.1039/d0cc07306g] [Citation(s) in RCA: 19] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023]
Abstract
A sandwich shelled hollow TiO2@Co3O4@Co3O4/C composite is synthesized by consecutive coating of Co3O4 nanosheets and TiO2 particles on Co3O4/C hollow spheres. The composite delivers an excellent lithium storage performance, maintaining 1081.78 mA h g-1 after 100 cycles at 0.2 A g-1 and 772.23 mA h g-1 after 300 cycles at 1 A g-1, due to its superior structure combining the advantages of each component with favorable electron-transfer, Li+-diffusion properties, and distinguished stability.
Collapse
Affiliation(s)
- Zheng Liu
- College of Chemistry and Materials Science, Anhui Key Laboratory of Functional Molecular Solids, Ministry of Education, The Key Laboratory of Electrochemical Clean Energy of Anhui Higher Education Institutes, Anhui Normal University, Wuhu, 241002, China.
| | | | | | | | | | | | | | | |
Collapse
|
25
|
Wu BS, Wang P, Teng SH. Controllable synthesis and coating-thickness-dependent electrochemical properties of mesoporous carbon-coated α-Fe2O3 nanoparticles for lithium-ion batteries. Colloids Surf A Physicochem Eng Asp 2021. [DOI: 10.1016/j.colsurfa.2020.125907] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/22/2022]
|
26
|
Xu Y, Ye X, Qiu Y, Gan C, Huang L, Tang X, Luo X. A Novel Co
3
O
4
/MnO
2
/C Electrode with Hierarchical Heterostructure for High‐performance Lithium‐Ion Batteries. ChemistrySelect 2020. [DOI: 10.1002/slct.202003656] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/13/2023]
Affiliation(s)
- Ying Xu
- Fujian Key Laboratory of Advanced Materials(Xiamen University) College of Materials Xiamen University Xiamen Fujian 361005 China
| | - Xiongbiao Ye
- Fujian Key Laboratory of Advanced Materials(Xiamen University) College of Materials Xiamen University Xiamen Fujian 361005 China
| | - Yiwei Qiu
- Fujian Key Laboratory of Advanced Materials(Xiamen University) College of Materials Xiamen University Xiamen Fujian 361005 China
| | - Chuanhai Gan
- Fujian Key Laboratory of Advanced Materials(Xiamen University) College of Materials Xiamen University Xiamen Fujian 361005 China
| | - Liuqing Huang
- Fujian Key Laboratory of Advanced Materials(Xiamen University) College of Materials Xiamen University Xiamen Fujian 361005 China
| | - Xueyuan Tang
- Fujian Key Laboratory of Advanced Materials(Xiamen University) College of Materials Xiamen University Xiamen Fujian 361005 China
| | - Xuetao Luo
- Fujian Key Laboratory of Advanced Materials(Xiamen University) College of Materials Xiamen University Xiamen Fujian 361005 China
| |
Collapse
|
27
|
Huang R, Zhou R, Wang L, Zhu Y. Dandelion‐like CoO/Co
3
O
4
/Carbon Composites as Anode Materials for a High‐Performance Lithium Ion Battery. ChemistrySelect 2020. [DOI: 10.1002/slct.202002986] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/28/2022]
Affiliation(s)
- Run Huang
- Key Laboratory of Functional Small Organic Molecule, Ministry of Education, Key Laboratory of Chemical Biology, Jiangxi Province, College of Chemistry and Chemical Engineering Jiangxi Normal University Nanchang 330022 China
| | - Rihui Zhou
- Analysis and Testing Center Jiangxi Normal University Nanchang 330022 China
| | - Li Wang
- Key Laboratory of Functional Small Organic Molecule, Ministry of Education, Key Laboratory of Chemical Biology, Jiangxi Province, College of Chemistry and Chemical Engineering Jiangxi Normal University Nanchang 330022 China
| | - Yongmei Zhu
- Analysis and Testing Center Jiangxi Normal University Nanchang 330022 China
| |
Collapse
|
28
|
Chen S, Jiang S, Jiang H. A review on conversion of crayfish-shell derivatives to functional materials and their environmental applications. JOURNAL OF BIORESOURCES AND BIOPRODUCTS 2020. [DOI: 10.1016/j.jobab.2020.10.002] [Citation(s) in RCA: 73] [Impact Index Per Article: 18.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/27/2022] Open
|
29
|
Fan H, Yi G, Tian Q, Zhang X, Xing B, Zhang C, Chen L, Zhang Y. Hydrothermal-template synthesis and electrochemical properties of Co 3O 4/nitrogen-doped hemisphere-porous graphene composites with 3D heterogeneous structure. RSC Adv 2020; 10:36794-36805. [PMID: 35517925 PMCID: PMC9057043 DOI: 10.1039/d0ra06897g] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/10/2020] [Accepted: 09/29/2020] [Indexed: 12/29/2022] Open
Abstract
Despite the high capacity of Co3O4 employed in lithium-ion battery anodes, the reduced conductivity and grievous volume change of Co3O4 during long cycling of insertion/extraction of lithium-ions remain a challenge. Herein, an optimized nanocomposite, Co3O4/nitrogen-doped hemisphere-porous graphene composite (Co3O4/N-HPGC), is synthesized by a facile hydrothermal-template approach with polystyrene (PS) microspheres as a template. The characterization results demonstrate that Co3O4 nanoparticles are densely anchored onto graphene layers, nitrogen elements are successfully introduced by carbamide and the nanocomposites maintain the hemispherical porous structure. As an anode material for lithium-ion batteries, the composite material not only maintains a relatively high lithium storage capacity (the first discharge specific capacity can reach 2696 mA h g−1), but also shows significantly improved rate performance (1188 mA h g−1 at 0.1 A g−1, 344 mA h g−1 at 5 A g−1) and enhanced cycling stability (683 mA h g−1 after 500 cycles at 1 A g−1). The enhanced electrochemical properties of Co3O4/N-HPGC nanocomposites can be ascribed to the synergistic effects of Co3O4 nanoparticles, novel hierarchical structure with hemisphere-pores and nitrogen-containing functional groups of the nanomaterials. Therefore, the developed strategy can be extended as a universal and scalable approach for integrating various metal oxides into graphene-based materials for energy storage and conversion applications. The Co3O4/N-HPGC nanocomposites synthesized by a hydrothermal-template approach with polystyrene microspheres as the template possess excellent electrochemical performance.![]()
Collapse
Affiliation(s)
- Haiyang Fan
- Henan Key Laboratory of Coal Green Conversion, College of Chemistry and Chemical Engineering, Henan Polytechnic University Jiaozuo 454003 China .,Collaborative Innovation Center of Coal Work Safety of Henan Province Jiaozuo 454003 China
| | - Guiyun Yi
- Henan Key Laboratory of Coal Green Conversion, College of Chemistry and Chemical Engineering, Henan Polytechnic University Jiaozuo 454003 China .,Collaborative Innovation Center of Coal Work Safety of Henan Province Jiaozuo 454003 China
| | - Qiming Tian
- Henan Key Laboratory of Coal Green Conversion, College of Chemistry and Chemical Engineering, Henan Polytechnic University Jiaozuo 454003 China .,Collaborative Innovation Center of Coal Work Safety of Henan Province Jiaozuo 454003 China
| | - Xiuxiu Zhang
- Henan Key Laboratory of Coal Green Conversion, College of Chemistry and Chemical Engineering, Henan Polytechnic University Jiaozuo 454003 China .,Collaborative Innovation Center of Coal Work Safety of Henan Province Jiaozuo 454003 China
| | - Baolin Xing
- Collaborative Innovation Center of Coal Work Safety of Henan Province Jiaozuo 454003 China .,Henan Province Industrial Technology Research Institute of Resources and Materials, Zhengzhou University Zhengzhou 454001 China
| | - Chuanxiang Zhang
- Henan Key Laboratory of Coal Green Conversion, College of Chemistry and Chemical Engineering, Henan Polytechnic University Jiaozuo 454003 China .,Collaborative Innovation Center of Coal Work Safety of Henan Province Jiaozuo 454003 China
| | - Lunjian Chen
- Henan Key Laboratory of Coal Green Conversion, College of Chemistry and Chemical Engineering, Henan Polytechnic University Jiaozuo 454003 China .,Collaborative Innovation Center of Coal Work Safety of Henan Province Jiaozuo 454003 China
| | - Yulong Zhang
- Henan Key Laboratory of Coal Green Conversion, College of Chemistry and Chemical Engineering, Henan Polytechnic University Jiaozuo 454003 China .,Collaborative Innovation Center of Coal Work Safety of Henan Province Jiaozuo 454003 China
| |
Collapse
|
30
|
Electrophoretic deposition of nanographitic flakes/Co3O4 nanocomposite layers synthesized by solvothermal process for improved lithium-ion-battery anode. J SOLID STATE CHEM 2020. [DOI: 10.1016/j.jssc.2020.121471] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
|
31
|
Dwivedi PK, Nair A, Mehare RS, Chaturvedi V, Joshi K, Shelke MV. Experimental and theoretical investigations of the effect of heteroatom-doped carbon microsphere supports on the stability and storage capacity of nano-Co 3O 4 conversion anodes for application in lithium-ion batteries. NANOSCALE ADVANCES 2020; 2:2914-2924. [PMID: 36132406 PMCID: PMC9418378 DOI: 10.1039/d0na00261e] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/03/2020] [Accepted: 05/11/2020] [Indexed: 06/15/2023]
Abstract
Conversion-type anode materials have been intensely studied for application in Li-ion batteries (LIBs) due to their potentially higher capacities than current graphite-based anodes. This work reports the development of a high-capacity and stable anode from a nanocomposite of N and S co-doped carbon spheres (NSCSs) with Co3O4 (NSCS-Co3O4). A hydrothermal reaction of saccharose with l-cysteine was carried out, followed by its carbonization. CSs when used as supports for conversion-type materials provide efficient electron/ion transfer channels, enhancing the overall electrochemical performance of the electrodes. Additionally, the heteroatoms doped in a carbon matrix alter the electronic properties, often increasing the reactivity of the carbon surface, and they are reported to be effective for anchoring metal oxide nanoparticles. Consequently, the NSCS-Co3O4 nanocomposites developed in this work exhibit enhanced and stable reversible specific capacity over several cycles. Stable cycling behavior was observed at 1 A g-1 with 1285 mA h g-1 of specific capacity retained after 350 cycles along with more than 99% of coulombic efficiency. This material shows excellent rate capability with a specific capacity of 745 mA h g-1 retained even at a high current density of 5 A g-1. Detailed DFT-based calculations revealed the role of doped supports in controlling the volume expansion upon lithiation.
Collapse
Affiliation(s)
- Pravin K Dwivedi
- Physical and Materials Chemistry Division, CSIR-National Chemical Laboratory Pune 411008 MH India
- Academy of Scientific and Innovative Research (AcSIR) Ghaziabad-200112 UP India
| | - Aathira Nair
- Physical and Materials Chemistry Division, CSIR-National Chemical Laboratory Pune 411008 MH India
| | - Rupali S Mehare
- Physical and Materials Chemistry Division, CSIR-National Chemical Laboratory Pune 411008 MH India
- Academy of Scientific and Innovative Research (AcSIR) Ghaziabad-200112 UP India
| | - Vikash Chaturvedi
- Physical and Materials Chemistry Division, CSIR-National Chemical Laboratory Pune 411008 MH India
- Academy of Scientific and Innovative Research (AcSIR) Ghaziabad-200112 UP India
| | - Kavita Joshi
- Physical and Materials Chemistry Division, CSIR-National Chemical Laboratory Pune 411008 MH India
- Academy of Scientific and Innovative Research (AcSIR) Ghaziabad-200112 UP India
| | - Manjusha V Shelke
- Physical and Materials Chemistry Division, CSIR-National Chemical Laboratory Pune 411008 MH India
- Academy of Scientific and Innovative Research (AcSIR) Ghaziabad-200112 UP India
| |
Collapse
|
32
|
Li Z, Zhao J, Nie J, Yao S, Wang J, Feng X. Co3O4/NiO/C composites derived from zeolitic imidazolate frameworks (ZIFs) as high-performance anode materials for Li-ion batteries. J Solid State Electrochem 2020. [DOI: 10.1007/s10008-020-04595-1] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
|
33
|
Shi M, Huang Z, Liu H, He J, Zeng W, Wu Q, Zhao Y, Tian M, Mu S. Ultralow nitrogen-doped carbon coupled carbon-doped Co3O4 microrods with tunable electron configurations for advanced Li-storage properties. Electrochim Acta 2019. [DOI: 10.1016/j.electacta.2019.135059] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/01/2022]
|
34
|
Nitrogen-Doped Porous Co 3O 4/Graphene Nanocomposite for Advanced Lithium-Ion Batteries. NANOMATERIALS 2019; 9:nano9091253. [PMID: 31484387 PMCID: PMC6781038 DOI: 10.3390/nano9091253] [Citation(s) in RCA: 17] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/17/2019] [Revised: 08/27/2019] [Accepted: 08/28/2019] [Indexed: 11/17/2022]
Abstract
A novel approach is developed to synthesize a nitrogen-doped porous Co3O4/anthracite-derived graphene (Co3O4/AG) nanocomposite through a combined self-assembly and heat treatment process using resource-rich anthracite as a carbonaceous precursor. The nanocomposite contains uniformly distributed Co3O4 nanoparticles with a size smaller than 8 nm on the surface of porous graphene, and exhibits a specific surface area (120 m2·g−1), well-developed mesopores distributed at 3~10 nm, and a high level of nitrogen doping (5.4 at. %). These unique microstructure features of the nanocomposite can offer extra active sites and efficient pathways during the electrochemical reaction, which are conducive to improvement of the electrochemical performance for the anode material. The Co3O4/AG electrode possesses a high reversible capacity of 845 mAh·g−1 and an excellent rate capacity of 587 mAh·g−1. Furthermore, a good cyclic stability of 510 mAh·g−1 after 100 cycles at 500 mA·g−1 is maintained. Therefore, this work could provide an economical and effective route for the large-scale application of a Co3O4/AG nanocomposite as an excellent anode material in lithium-ion batteries.
Collapse
|
35
|
Surfactant-assisted synthesis of ultrathin two-dimensional Co3O4 nanosheets for applications in lithium-ion batteries and ultraviolet photodetector. J SOLID STATE CHEM 2019. [DOI: 10.1016/j.jssc.2019.03.033] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/06/2023]
|
36
|
Kim HS, Abbas MA, Kang MS, Kyung H, Bang JH, Yoo WC. Study of the structure-properties relations of carbon spheres affecting electrochemical performances of EDLCs. Electrochim Acta 2019. [DOI: 10.1016/j.electacta.2019.02.121] [Citation(s) in RCA: 34] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
37
|
Cao Y, Geng K, Geng H, Ang H, Pei J, Liu Y, Cao X, Zheng J, Gu H. Metal-Oleate Complex-Derived Bimetallic Oxides Nanoparticles Encapsulated in 3D Graphene Networks as Anodes for Efficient Lithium Storage with Pseudocapacitance. NANO-MICRO LETTERS 2019; 11:15. [PMID: 34137982 PMCID: PMC7770734 DOI: 10.1007/s40820-019-0247-3] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/19/2018] [Accepted: 02/01/2019] [Indexed: 05/24/2023]
Abstract
In this manuscript, we have demonstrated the delicate design and synthesis of bimetallic oxides nanoparticles derived from metal-oleate complex embedded in 3D graphene networks (MnO/CoMn2O4 ⊂ GN), as an anode material for lithium ion batteries. The novel synthesis of the MnO/CoMn2O4 ⊂ GN consists of thermal decomposition of metal-oleate complex containing cobalt and manganese metals and oleate ligand, forming bimetallic oxides nanoparticles, followed by a self-assembly route with reduced graphene oxides. The MnO/CoMn2O4 ⊂ GN composite, with a unique architecture of bimetallic oxides nanoparticles encapsulated in 3D graphene networks, rationally integrates several benefits including shortening the diffusion path of Li+ ions, improving electrical conductivity and mitigating volume variation during cycling. Studies show that the electrochemical reaction processes of MnO/CoMn2O4 ⊂ GN electrodes are dominated by the pseudocapacitive behavior, leading to fast Li+ charge/discharge reactions. As a result, the MnO/CoMn2O4 ⊂ GN manifests high initial specific capacity, stable cycling performance, and excellent rate capability.
Collapse
Affiliation(s)
- Yingying Cao
- Key Laboratory of Organic Synthesis of Jiangsu Province, College of Chemistry, Chemical Engineering and Materials Science and Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou, 215123, People's Republic of China
| | - Kaiming Geng
- Key Laboratory of Organic Synthesis of Jiangsu Province, College of Chemistry, Chemical Engineering and Materials Science and Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou, 215123, People's Republic of China
| | - Hongbo Geng
- School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, People's Republic of China.
| | - Huixiang Ang
- School of Chemical and Biomedical Engineering, Nanyang Technological University, Singapore, 637459, Singapore
| | - Jie Pei
- Key Laboratory of Organic Synthesis of Jiangsu Province, College of Chemistry, Chemical Engineering and Materials Science and Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou, 215123, People's Republic of China
| | - Yayuan Liu
- Key Laboratory of Organic Synthesis of Jiangsu Province, College of Chemistry, Chemical Engineering and Materials Science and Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou, 215123, People's Republic of China
| | - Xueqin Cao
- Key Laboratory of Organic Synthesis of Jiangsu Province, College of Chemistry, Chemical Engineering and Materials Science and Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou, 215123, People's Republic of China
| | - Junwei Zheng
- College of Physics, Optoelectronic and Energy, Soochow University, Suzhou, 215006, People's Republic of China
| | - Hongwei Gu
- Key Laboratory of Organic Synthesis of Jiangsu Province, College of Chemistry, Chemical Engineering and Materials Science and Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou, 215123, People's Republic of China.
| |
Collapse
|
38
|
α-Fe2O3 anchored on porous N doped carbon derived from green microalgae via spray pyrolysis as anode materials for lithium ion batteries. J IND ENG CHEM 2019. [DOI: 10.1016/j.jiec.2018.09.004] [Citation(s) in RCA: 23] [Impact Index Per Article: 4.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
|
39
|
Filter Paper-Derived Three-Dimensional Carbon Fibers Film Supported Fe3O4 as a Superior Binder-Free Anode Material for High Performance Lithium-Ion Batteries. ACTA ACUST UNITED AC 2018. [DOI: 10.1007/s11859-018-1340-z] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/16/2022]
|
40
|
Li X, Tian X, Yang T, Song Y, Liu Z. Hierarchically Multiporous Carbon Nanotube/Co3
O4
Composite as an Anode Material for High-Performance Lithium-Ion Batteries. Chemistry 2018; 24:14477-14483. [DOI: 10.1002/chem.201802715] [Citation(s) in RCA: 23] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/29/2018] [Revised: 07/22/2018] [Indexed: 11/06/2022]
Affiliation(s)
- Xiao Li
- CAS Key Laboratory of Carbon Materials; Institute of Coal Chemistry; Chinese Academy of Sciences; Taiyuan 030001 P.R. China
- University of Chinese Academy of Sciences; Beijing 100049 P.R. China
| | - Xiaodong Tian
- CAS Key Laboratory of Carbon Materials; Institute of Coal Chemistry; Chinese Academy of Sciences; Taiyuan 030001 P.R. China
| | - Tao Yang
- CAS Key Laboratory of Carbon Materials; Institute of Coal Chemistry; Chinese Academy of Sciences; Taiyuan 030001 P.R. China
- University of Chinese Academy of Sciences; Beijing 100049 P.R. China
| | - Yan Song
- CAS Key Laboratory of Carbon Materials; Institute of Coal Chemistry; Chinese Academy of Sciences; Taiyuan 030001 P.R. China
| | - Zhanjun Liu
- CAS Key Laboratory of Carbon Materials; Institute of Coal Chemistry; Chinese Academy of Sciences; Taiyuan 030001 P.R. China
| |
Collapse
|
41
|
Wei H, Liao K, Shi P, Fan J, Xu Q, Min Y. Simple method to construct three-dimensional porous carbon for electrochemical energy storage. NANOSCALE 2018; 10:15842-15853. [PMID: 30105320 DOI: 10.1039/c8nr04467h] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
A 3D porous carbon matrix with a high nitrogen content has been synthesized by employing particles of a nitrogen-enriched superabsorbent polymer (SAP) from the waste diapers of newborn babies. The derived material exhibits an ultrathin layered structure with interconnected pores and a large specific surface area. As it inherits the unique skeleton of the functional polymer from waste diapers, the resulting material (NSAPC-W) has been assessed as an inserting host anode with excellent ultralong cycling performance, as well as steady rate capability for both Li+ and Na+ ions in half cells. Furthermore, the unique structure imparts intimate structural interconnectivity, wide open channels for ion diffusion, and a large accessible surface area, as well as high structural stability, and opens up a wide horizon for electrochemical applications.
Collapse
Affiliation(s)
- Huanhuan Wei
- Shanghai Key Laboratory of Materials Protection and Advanced Materials in Electric Power, Shanghai University of Electric Power, Shanghai 200090, P. R. China.
| | | | | | | | | | | |
Collapse
|
42
|
Zhang Y, Li L, Ao S, Wang J, Li G. Interfacial Doping of Heteroatom in Porous SnO 2 for Highly Sensitive Surface Properties. ACS OMEGA 2018; 3:6988-6997. [PMID: 31458864 PMCID: PMC6644739 DOI: 10.1021/acsomega.8b00725] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/15/2018] [Accepted: 06/06/2018] [Indexed: 05/03/2023]
Abstract
The design and synthesis of heteroatom-doping porous materials with unique surface/interfaces are of great significance for enhancing the sensitive surface performance in the fields of catalytic energy, especially gas sensor, CO oxidation, and ammonium perchlorate decomposition. Usually, the template method followed by a high-temperature calcination process is considered as the routes of choice in preparing ion-doped porous materials, but it requires extra templates and will undergo complicated steps. Here, we present a simple fusion/diffusion-controlled intermetallics-transformation method to synthesize various heteroatom-doping porous SnO2 only by changing the species of intermetallics. By this new method, Ni-doped popcornlike SnO2 with plenty of ∼30 nm pores and two kinds of Cu-doped SnO2 nanocages was successfully constructed. Phase-evolution investigations demonstrated that growth kinetics, diffusion, and solubility of the intermediates are highly related to the architecture of final products. Moreover, low-solid-solution limit of MO x (M: Ni, Cu) in SnO2 made the ion dope close to the surface to form a special surface/interfaces structure, and selective removal of MO x produce abundant pores to increase the surface area. As a consequence, Ni-doped composite exhibits higher sensitivity in formaldehyde detection with a relative low-operating temperature in a short response time (i.e., 23.7-50 ppm formaldehyde, 170 °C, and 5 s) and Cu-doped composites show excellent activity in decreasing the catalytic temperature of CO oxidation and ammonium perchlorate decomposition. The fusion/diffusion-controlled intermetallics-transformation method reported in this work could be readily adopted for the synthesis of other active heteroatom-doping porous materials for multipurpose uses.
Collapse
Affiliation(s)
- Yuelan Zhang
- States
Key Laboratory of Inorganic Synthesis and Preparative Chemistry, College
of Chemistry, Jilin University, Changchun 130012, P. R. China
| | - Liping Li
- States
Key Laboratory of Inorganic Synthesis and Preparative Chemistry, College
of Chemistry, Jilin University, Changchun 130012, P. R. China
| | - Saren Ao
- States
Key Laboratory of Inorganic Synthesis and Preparative Chemistry, College
of Chemistry, Jilin University, Changchun 130012, P. R. China
| | - Jianghao Wang
- Key
Laboratory of Design and Assembly of Functional Nanostructures, Fujian
Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou 350002, P. R. China
| | - Guangshe Li
- States
Key Laboratory of Inorganic Synthesis and Preparative Chemistry, College
of Chemistry, Jilin University, Changchun 130012, P. R. China
- E-mail: (G.L.)
| |
Collapse
|
43
|
Zhong M, He WW, Shuang W, Liu YY, Hu TL, Bu XH. Metal–Organic Framework Derived Core–Shell Co/Co3O4@N-C Nanocomposites as High Performance Anode Materials for Lithium Ion Batteries. Inorg Chem 2018; 57:4620-4628. [DOI: 10.1021/acs.inorgchem.8b00365] [Citation(s) in RCA: 69] [Impact Index Per Article: 11.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/25/2022]
Affiliation(s)
- Ming Zhong
- School of Materials Science and Engineering, Tianjin Key Laboratory of Metal and Molecule-Based Material Chemistry, National Institute for Advanced Materials, Nankai University, Tianjin 300350, People’s Republic of China
- Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education) and Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Nankai University, Tianjin 300071, People’s Republic of China
| | - Wei-Wei He
- Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education) and Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Nankai University, Tianjin 300071, People’s Republic of China
- College of Chemistry, State Key Laboratory of Elemento-organic Chemistry, Nankai University, Tianjin 300071, People’s Republic of China
| | - Wei Shuang
- School of Materials Science and Engineering, Tianjin Key Laboratory of Metal and Molecule-Based Material Chemistry, National Institute for Advanced Materials, Nankai University, Tianjin 300350, People’s Republic of China
- Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education) and Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Nankai University, Tianjin 300071, People’s Republic of China
| | - Ying-Ying Liu
- School of Materials Science and Engineering, Tianjin Key Laboratory of Metal and Molecule-Based Material Chemistry, National Institute for Advanced Materials, Nankai University, Tianjin 300350, People’s Republic of China
- Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education) and Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Nankai University, Tianjin 300071, People’s Republic of China
| | - Tong-Liang Hu
- School of Materials Science and Engineering, Tianjin Key Laboratory of Metal and Molecule-Based Material Chemistry, National Institute for Advanced Materials, Nankai University, Tianjin 300350, People’s Republic of China
- Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education) and Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Nankai University, Tianjin 300071, People’s Republic of China
| | - Xian-He Bu
- School of Materials Science and Engineering, Tianjin Key Laboratory of Metal and Molecule-Based Material Chemistry, National Institute for Advanced Materials, Nankai University, Tianjin 300350, People’s Republic of China
- Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education) and Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Nankai University, Tianjin 300071, People’s Republic of China
- College of Chemistry, State Key Laboratory of Elemento-organic Chemistry, Nankai University, Tianjin 300071, People’s Republic of China
| |
Collapse
|
44
|
Horsetail-derived Si@N-doped carbon as low-cost and long cycle life anode for Li-ion half/full cells. Electrochim Acta 2018. [DOI: 10.1016/j.electacta.2018.01.088] [Citation(s) in RCA: 45] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
|
45
|
Jiao K, Kang Z, Wang B, Jiao S, Jiang Y, Hu Z. Applying Co3
O4
@nanoporous Carbon to Nonenzymatic Glucose Biofuel Cell and Biosensor. ELECTROANAL 2018. [DOI: 10.1002/elan.201700719] [Citation(s) in RCA: 21] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/05/2023]
Affiliation(s)
- Kailong Jiao
- State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing; Beijing 100083 P.R. China
| | - Zepeng Kang
- State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing; Beijing 100083 P.R. China
| | - Bing Wang
- Beijing Institute of System Engineering; Beijing 100101 P.R. China
| | - Shuqiang Jiao
- State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing; Beijing 100083 P.R. China
| | - Yu Jiang
- Department of Orthopedics; Peking University Third Hospital; Beijing 100191 P.R. China
| | - Zongqian Hu
- Beijing Institute of Radiation Medicine; Beijing 100850 P.R. China
| |
Collapse
|
46
|
Tang X, Feng Q, Huang J, Liu K, Luo X, Peng Q. Carbon-coated cobalt oxide porous spheres with improved kinetics and good structural stability for long-life lithium-ion batteries. J Colloid Interface Sci 2018; 510:368-375. [DOI: 10.1016/j.jcis.2017.09.086] [Citation(s) in RCA: 22] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/24/2017] [Revised: 09/20/2017] [Accepted: 09/22/2017] [Indexed: 11/17/2022]
|
47
|
Guo S, Zhao S, Wu X, Li H, Zhou Y, Zhu C, Yang N, Jiang X, Gao J, Bai L, Liu Y, Lifshitz Y, Lee ST, Kang Z. A Co 3O 4-CDots-C 3N 4 three component electrocatalyst design concept for efficient and tunable CO 2 reduction to syngas. Nat Commun 2017; 8:1828. [PMID: 29184053 PMCID: PMC5705642 DOI: 10.1038/s41467-017-01893-7] [Citation(s) in RCA: 68] [Impact Index Per Article: 9.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/07/2017] [Accepted: 10/19/2017] [Indexed: 11/09/2022] Open
Abstract
Syngas, a CO and H2 mixture mostly generated from non-renewable fossil fuels, is an essential feedstock for production of liquid fuels. Electrochemical reduction of CO2 and H+/H2O is an alternative renewable route to produce syngas. Here we introduce the concept of coupling a hydrogen evolution reaction (HER) catalyst with a CDots/C3N4 composite (a CO2 reduction catalyst) to achieve a cheap, stable, selective and efficient route for tunable syngas production. Co3O4, MoS2, Au and Pt serve as the HER component. The Co3O4-CDots-C3N4 electrocatalyst is found to be the most efficient among the combinations studied. The H2/CO ratio of the produced syngas is tunable from 0.07:1 to 4:1 by controlling the potential. This catalyst is highly stable for syngas generation (over 100 h) with no other products besides CO and H2. Insight into the mechanisms balancing between CO2 reduction and H2 evolution when applying the HER-CDots-C3N4 catalyst concept is provided.
Collapse
Affiliation(s)
- Sijie Guo
- Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Institute of Functional Nano & Soft Materials (FUNSOM), Soochow University, 199 Ren'ai Road, Suzhou, 215123, Jiangsu, China
| | - Siqi Zhao
- Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Institute of Functional Nano & Soft Materials (FUNSOM), Soochow University, 199 Ren'ai Road, Suzhou, 215123, Jiangsu, China
| | - Xiuqin Wu
- Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Institute of Functional Nano & Soft Materials (FUNSOM), Soochow University, 199 Ren'ai Road, Suzhou, 215123, Jiangsu, China
| | - Hao Li
- Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Institute of Functional Nano & Soft Materials (FUNSOM), Soochow University, 199 Ren'ai Road, Suzhou, 215123, Jiangsu, China
| | - Yunjie Zhou
- Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Institute of Functional Nano & Soft Materials (FUNSOM), Soochow University, 199 Ren'ai Road, Suzhou, 215123, Jiangsu, China
| | - Cheng Zhu
- Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Institute of Functional Nano & Soft Materials (FUNSOM), Soochow University, 199 Ren'ai Road, Suzhou, 215123, Jiangsu, China
| | - Nianjun Yang
- Institute of Materials Engineering, University of Siegen, 57076, Siegen, Germany
| | - Xin Jiang
- Institute of Materials Engineering, University of Siegen, 57076, Siegen, Germany.
| | - Jin Gao
- Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Institute of Functional Nano & Soft Materials (FUNSOM), Soochow University, 199 Ren'ai Road, Suzhou, 215123, Jiangsu, China
| | - Liang Bai
- Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Institute of Functional Nano & Soft Materials (FUNSOM), Soochow University, 199 Ren'ai Road, Suzhou, 215123, Jiangsu, China
| | - Yang Liu
- Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Institute of Functional Nano & Soft Materials (FUNSOM), Soochow University, 199 Ren'ai Road, Suzhou, 215123, Jiangsu, China.
| | - Yeshayahu Lifshitz
- Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Institute of Functional Nano & Soft Materials (FUNSOM), Soochow University, 199 Ren'ai Road, Suzhou, 215123, Jiangsu, China
- Department of Materials Science and Engineering, Technion, Israel Institute of Technology, Haifa, 3200003, Israel
| | - Shuit-Tong Lee
- Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Institute of Functional Nano & Soft Materials (FUNSOM), Soochow University, 199 Ren'ai Road, Suzhou, 215123, Jiangsu, China.
| | - Zhenhui Kang
- Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Institute of Functional Nano & Soft Materials (FUNSOM), Soochow University, 199 Ren'ai Road, Suzhou, 215123, Jiangsu, China.
| |
Collapse
|
48
|
Co@Carbon and Co 3 O 4@Carbon nanocomposites derived from a single MOF for supercapacitors. Sci Rep 2017; 7:12588. [PMID: 28974746 PMCID: PMC5626685 DOI: 10.1038/s41598-017-12733-5] [Citation(s) in RCA: 71] [Impact Index Per Article: 10.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/18/2017] [Accepted: 09/18/2017] [Indexed: 11/16/2022] Open
Abstract
Developing a composite electrode containing both carbon and transition metal/metal oxide as the supercapacitor electrode can combine the merits and mitigate the shortcomings of both the components. Herein, we report a simple strategy to prepare the hybrid nanostructure of Co@Carbon and Co3O4@Carbon by pyrolysis a single MOFs precursor. Co-based MOFs (Co-BDC) nanosheets with morphology of regular parallelogram slice have been prepared by a bottom-up synthesis strategy. One-step pyrolysis of Co-BDC, produces a porous carbon layer incorporating well-dispersed Co and Co3O4 nanoparticles. The as-prepared cobalt-carbon composites exhibit the thin layer morphology and large specific surface area with hierarchical porosity. These features significantly improve the ion-accessible surface area for charge storage and shorten the ion transport length in thin dimension, thus contributing to a high specific capacitance. Improved capacitance performance was successfully realized for the asymmetric supercapacitors (ASCs) (Co@Carbon//Co3O4@Carbon), better than those of the symmetric supercapacitors (SSCs) based on Co@Carbon and Co3O4@Carbon materials (i.e., Co@Carbon//Co@Carbon and Co3O4@Carbon//Co3O4@Carbon). The working voltage of the ASCs can be extended to 1.5 V and show a remarkable high power capability in aqueous electrolyte. This work provides a controllable strategy for nanostructured carbon-metal and carbon-metal oxide composite electrodes from a single precursor.
Collapse
|
49
|
Yang Y, Huang J, Zeng J, Xiong J, Zhao J. Direct Electrophoretic Deposition of Binder-Free Co 3O 4/Graphene Sandwich-Like Hybrid Electrode as Remarkable Lithium Ion Battery Anode. ACS APPLIED MATERIALS & INTERFACES 2017; 9:32801-32811. [PMID: 28880068 DOI: 10.1021/acsami.7b10683] [Citation(s) in RCA: 24] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/26/2023]
Abstract
Co3O4 is emerging as a promising anode candidate for lithium ion batteries (LIBs) with high theoretical capacity (890 mAh g-1) but suffers from poor electrochemical cycling stability resulting from the inferior intrinsic electronic conductivity and large volume changes during electrochemical cycling. Here, a new electrophoretic deposition Co3O4/graphene (EPD Co3O4/G) hybrid electrode is developed to improve the electrochemical performance. Through EPD, Co3O4 nanocubes can be homogeneously embedded between graphene sheets to form a sandwich-like structure. Owing to the excellent flexibility of graphene and a large number of voids in this sandwich-like structure, the structural integrity and unobstructed conductive network can be maintained during cycling. Moreover, the electrode kinetics has proved to be a fast surface-controlled lithium storage process. As a result, the Co3O4/G hybrid electrode exhibits high specific capacity and excellent electrochemical cycling performance. The Co3O4/G hybrid electrode was also further studied by in situ electrochemical XRD to understand the relationship of its structure and performance: (1) The observed LixCo3O4 indicates an intermediate of possible small volume change in the first discharging. (2) The theoretical capacity achievement of the Co3O4 in hybrid electrode was evidenced. (3) The correlation between the electrochemical performance and the structural evolution of the Co3O4/G hybrid electrode was discussed detailedly.
Collapse
Affiliation(s)
- Yang Yang
- State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering, Collaborative Innovation Center of Chemistry for Energy Materials, Xiamen University , Xiamen 361005, China
| | - Jingxin Huang
- State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering, Collaborative Innovation Center of Chemistry for Energy Materials, Xiamen University , Xiamen 361005, China
| | - Jing Zeng
- State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering, Collaborative Innovation Center of Chemistry for Energy Materials, Xiamen University , Xiamen 361005, China
| | - Jian Xiong
- State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering, Collaborative Innovation Center of Chemistry for Energy Materials, Xiamen University , Xiamen 361005, China
| | - Jinbao Zhao
- State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering, Collaborative Innovation Center of Chemistry for Energy Materials, Xiamen University , Xiamen 361005, China
| |
Collapse
|
50
|
Li M, Zhang X, Jiang H, Wang X, Ru Y, Qiao J. Preparation and application of N-doped carbon nanotube arrays on graphene fibers. NANOTECHNOLOGY 2017; 28:38LT01. [PMID: 28723679 DOI: 10.1088/1361-6528/aa80d8] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
A new kind of carbon hybrid material with a unique structure and outstanding mechanical and functional properties is reported in this article. Nitrogen-doped carbon nanotube (CNT) arrays with inside located Ni particles are in situ grown on the surface of phenolic carbon modified graphene fibers during their conversion from graphene oxide fibers. The carbon hybrid fibers exhibit not only high tensile strength and elongation at the break, but also excellent flexibility since the CNT arrays cover all the surface of the highly strong graphene fiber. This well-constructed carbon material would be suitable for catalysts, polymer composites, hydrogen storage, oxygen reduction reaction etc.
Collapse
Affiliation(s)
- Mochen Li
- College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, People's Republic of China. SINOPEC Beijing Research Institute of Chemical Industry, Beijing 100013, People's Republic of China
| | | | | | | | | | | |
Collapse
|