Si-doped carbon quantum dots: a facile and general preparation strategy, bioimaging application, and multifunctional sensor

Luminescent Silicon Nanocrystals as Metal Ion Sensors

At relatively low concentrations in aqueous solution, Fe3+, Fe2+, Cu2+, and Ni2+ quench the photoluminescence (PL) of the undecenoic acid-capped silicon (Si) nanocrystals. The PL could be restored by adding a chelating agent, such as ethylenediaminetetraacetic acid (EDTA), to remove the ions. Fe3+ and Cu2+ also significantly increase the PL lifetime. Other metal ions, including Cd2+, Mn2+, Pb2+, Zn2+, In3+, K+, and Ca2+, had no effect on the Si nanocrystal PL. The limits of detection (LODs) for Fe3+ and Cu2+ of 370 and 150 nM, respectively, are low enough for metal ion sensing applications.

Fluorescent Nanocarbons: From Synthesis and Structure to Cancer Imaging and Therapy

Nanocarbons are emerging at the forefront of nanoscience, with diverse carbon nanoforms emerging over the past two decades. Early cancer diagnosis and therapy, driven by advanced chemistry techniques, play a pivotal role in mitigating mortality rates associated with cancer. Nanocarbons, with an attractive combination of well-defined architectures, biocompatibility, and nanoscale dimension, offer an incredibly versatile platform for cancer imaging and therapy. This paper aims to review the underlying principles regarding the controllable synthesis, fluorescence origins, cellular toxicity, and surface functionalization routes of several classes of nanocarbons: carbon nanodots, nanodiamonds, carbon nanoonions, and carbon nanohorns. This review also highlights recent breakthroughs regarding the green synthesis of different nanocarbons from renewable sources. It also presents a comprehensive and unified overview of the latest cancer-related applications of nanocarbons and how they can be designed to interface with biological systems and work as cancer diagnostics and therapeutic tools. The commercial status for large-scale manufacturing of nanocarbons is also presented. Finally, it proposes future research opportunities aimed at engendering modifiable and high-performance nanocarbons for emerging applications across medical industries. This work is envisioned as a cornerstone to guide interdisciplinary teams in crafting fluorescent nanocarbons with tailored attributes that can revolutionize cancer diagnostics and therapy.

Human serum albumin directed formation of cadmium telluride quantum dots: Applications in biosensing, anti-bacterial activities and cell cytotoxicity measurements

Although cadmium-based quantum dots (QDs) are highly promising candidates for numerous biological applications, their intrinsic toxicity limits their pertinency in living systems. Surface functionalization of QDs with appropriate molecules could reduce the toxicity level. Herein, we have synthesized the smaller sized (1-5 nm) aqueous-compatible biogenic CdTe QDs using human serum albumin (HSA) as a surface passivating agent via a greener approach. HSA-functionalized CdTe QDs have been explored in multiple in vitro sensing and biological applications, namely, (1) sensing, (2) anti-bacterial and (3) anti-cancer properties. Using CdTe-HSA QDs as a fluorescence probe, a simple fluorometric method has been developed for highly sensitive and selective detection of blood marker bilirubin and hazardous Hg2+ ion with a limit of detection (LOD) of 3.38 and 0.53 ng/mL, respectively. CdTe-HSA QDs also acts as a sensor for standard antibiotics, tetracycline and rifampicin with LOD values of 41.34 and 114.99 ng/mL, respectively. Nano-sized biogenic CdTe-HSA QDs have shown promising anti-bacterial activities against both gram-negative, E. coli and gram-positive, E. faecalis strains confirming more effectiveness against E. faecalis strains. The treatment of human cervical cancer cell lines (HeLa cells) with the synthesized QDs reflected the proficient cytotoxic properties of QDs.

Tumor diagnosis using carbon-based quantum dots: Detection based on the hallmarks of cancer

Carbon-based quantum dots (CQDs) have been shown to have promising application value in tumor diagnosis. Their use, however, is severely hindered by the complicated nature of the nanostructures in the CQDs. Furthermore, it seems impossible to formulate the mechanisms involved using the inadequate theoretical frameworks that are currently available for CQDs. In this review, we re-consider the structure-property relationships of CQDs and summarize the current state of development of CQDs-based tumor diagnosis based on biological theories that are fully developed. The advantages and deficiencies of recent research on CQDs-based tumor diagnosis are thus explained in terms of the manifestation of nine essential changes in cell physiology. This review makes significant progress in addressing related problems encountered with other nanomaterials.

Structural Features of Carbon Dots and Their Agricultural Potential

Carbon dots (CDs) have drawn attention due to their enticing physical, chemical, and surface properties. Besides, good conductivity, low toxicity, environmental friendliness, simple synthetic routes, and comparable optical properties are advantageous features of CDs. Further, recently, CDs have been explored for biological systems, including plants. Among biological systems, only plants form the basis for sustainability and life on Earth. In this Review, we reviewed suitable properties and applications of CDs, such as promoting the growth of agricultural plants, disease resistance, stress tolerance, and target transportation. Summing up the available studies, we believe that the applications of CDs are yet to be explored significantly for innovation and technology-based agriculture.

Carbon quantum dots in bioimaging and biomedicines

Carbon quantum dots (CQDs) are gaining a lot more attention than traditional semiconductor quantum dots owing to their intrinsic fluorescence property, chemical inertness, biocompatibility, non-toxicity, and simple and inexpensive synthetic route of preparation. These properties allow CQDs to be utilized for a broad range of applications in various fields of scientific research including biomedical sciences, particularly in bioimaging and biomedicines. CQDs are a promising choice for advanced nanomaterials research for bioimaging and biomedicines owing to their unique chemical, physical, and optical properties. CQDs doped with hetero atom, or polymer composite materials are extremely advantageous for biochemical, biological, and biomedical applications since they are easy to prepare, biocompatible, and have beneficial properties. This type of CQD is highly useful in phototherapy, gene therapy, medication delivery, and bioimaging. This review explores the applications of CQDs in bioimaging and biomedicine, highlighting recent advancements and future possibilities to increase interest in their numerous advantages for therapeutic applications.

Organosilicon-Based Carbon Dots and Their Versatile Applications

Carbon dots (CDs) are a newly discovered type of fluorescent material that has gained significant attention due to their exceptional optical properties, biocompatibility, and other remarkable characteristics. However, single CDs have some drawbacks such as self-quenching, low quantum yield (QY), and poor stability. To address these issues, researchers have turned to organosilicon, which is known for its green, economical, and abundant properties. Organosilicon is widely used in various fields including optics, electronics, and biology. By utilizing organosilicon as a synthetic precursor, the biocompatibility, QY, and resistance to self-quenching of CDs can be improved. Meanwhile, the combination of organosilicon with CDs enables the functionalization of CDs, which significantly expands their original application scenarios. This paper comprehensively analyzes organosilicon in two main categories: precursors for CD synthesis and matrix materials for compounding with CDs. The role of organosilicon in these categories is thoroughly reviewed. In addition, the paper presents various applications of organosilicon compounded CDs, including detection and sensing, anti-counterfeiting, optoelectronic applications, and biological applications. Finally, the paper briefly discusses current development challenges and future directions in the field.

Carbon Dots: From Synthesis to Unraveling the Fluorescence Mechanism

Carbon dots (CDs) being a new type of carbon-based nanomaterial have attracted intensive interest from researchers owing to their excellent biophysical properties. CDs are a class of fluorescent carbon nanomaterials that have emerged as a promising alternative to traditional quantum dots and organic dyes in applications including bioimaging, sensing, and optoelectronics. CDs possess unique optical properties, such as tunable emission, facile synthesis, and low toxicity, making them attractive for many applications in biology, medicine, and environmental areas. The synthesis of CDs is achievable by a variety of methods, including bottom-up and top-down approaches, involving the use of different carbon sources and surface functionalization strategies. However, understanding the fluorescence mechanism of CDs remains a challenge. Various mechanistic models have been proposed to explain their origin of luminescence. This review summarizes the recent developments in the synthesis and functionalization of CDs and provides an overview of the current understanding of the fluorescence mechanism.

Photophysical Study of Heteroatom-Doped Carbon Dots-MnO2-Based Nanosensor: Selective Detection of Glutathione in the Nanomolar Level

Heteroatom doping on carbon dots (Cdots) has been developed as an efficient approach to modify its optical and electronic properties. The four different types of heteroatom-doped Cdots (undoped Cdots (u-Cdots, nitrogen-doped Cdots (N-Cdots), sulfur-doped Cdots (Cdots), nitrogen, sulfur codoped Cdots (N, S-Cdots)) have been synthesized through a simple heat treatment of 5 min. Among four different heteroatoms doped nanosensors, N, S-Cdots with MnO2 nanospheres (Mn NS) showed one of the best fluorescents "on-off-on" nanosensors for selective sensing of glutathione (GSH) and cell imaging. N, S-Cdots showed a high fluorescence quantum yield, good photostability, ionic strength, and pH stability. N, S-Cdots with Mn NS demonstrated extremely high fluorescence quenching efficiency and the maximum fluorescence recovery rate after adding GSH to the produced solution. The photophysical study of N, S-Cdots-Mn NS used as a sensor confirms the inner filter effect (IFE) quenching mechanism between them. The developed sensor has an 80 nM limit of detection (LOD) for GSH. The heteroatom-doped framework of Cdots plays a significant role in the sensitive detection of GSH. N, S-Cdots-Mn NS have good permeability, biocompatibility, and low toxicity, due to which it was used in the intracellular imaging of GSH in living cells. The prepared sensor is rapid, economical, less toxic, and highly applicable in diagnosing diseases.

A Fluorescence Biosensor for Tyrosinase Activity Analysis Based on Silicon-Doped Carbon Quantum Dots

Tyrosinase (TYR) plays a pivotal role in the biosynthesis of melanin, and its activity level holds critical implications for vitiligo, melanoma cancer, and food nutritional value. The sensitive determination of TYR activity is of great significance for both fundamental research and clinical investigations. In this work, we successfully synthesized silicon-doped carbon quantum dots (Si-CQDs) through a one-pot hydrothermal method with trans-aconitic acid as carbon source and N-[3-(trimethoxysilyl)propyl]ethylenediamine as the dopant, exhibiting remarkable fluorescence quantum yield (QY) and photostability. Correspondingly, Si-CQDs were used as a probe to construct a sensitive, rapid, and user-friendly fluorescence method for TYR detection. The method relied on the oxidation of isoprenaline (ISO) by TYR, where Si-CQDs were employed as a highly efficient probe. The testing mechanism was the internal filtering effect (IFE) observed between Si-CQDs and the oxidative system of ISO and TYR. Under the optimized conditions, the fluorescence strategy exhibited a detection range of 0.05-2.0 U/mL for TYR with a limit of detection (LOD) of 0.041 U/mL. Furthermore, we successfully demonstrated the accurate determination of TYR levels in human serum, showcasing the promising potential of this method in various practical scenarios.

Effectively synthesized functional Si-doped carbon dots with the applications in tyrosinase detection and lysosomal imaging

There has been significant interest in the preparation and versatile applications of carbon dots (CDs) due to their immense potential value in sensors and imaging. In this work, silicon-doped green carbon dots (Si-CDs) with high quantum yield and rich epoxypropyl were effectively synthesized. Given the clinical diagnostic importance of abnormal levels of tyrosinase (TYR), sensitive detection of TYR is significant for clinical research. A fluorescence signal-off strategy with Si-CDs as probe was constructed to determine TYR based on the oxidation of dopamine by TYR. The detection ranges of this method were 0.01-1.5 and 10-30 U/mL with the detection limit of 0.0046 U/mL, the lower limit of quantification (LLOQ) was 0.01 U/mL, and TYR was successfully and accurately monitored in human serum. Additionally, due to the role of lysosomes in cellular regulatory processes, including TYR levels and fluorescence stability characteristics of Si-CDs in acidic conditions, it was envisaged to use Si-CDs as probe to establish real-time monitoring of lysosomes. According to fluorescence colocation analysis, Si-CDs had intrinsic lysosomal targeting ability to HepG2 and L-02 (with Pearson correlation coefficients were 0.90 and 0.91, respectively). The targeting of Si-CDs to lysosomes was due to the acidophilic effect of the epoxypropyl on its surface.

Carbon Dots Derived from Traditional Chinese Medicines with Bioactivities: A Rising Star in Clinical Treatment

In the field of carbon nanomaterials, carbon dots (CDs) have become a preferable choice in biomedical applications. Based on the concept of green chemistry, CDs derived from traditional Chinese medicines (TCMs) have attracted extensive attention, including TCM charcoal drugs, TCM extracts, and TCM small molecules. The design and preparation of CDs from TCMs (TCMs-CDs) can improve the inherent characteristics of TCMs, such as solubility, particle size distribution, and so on. Compared with other precursor materials, TCMs-CDs have outstanding intrinsic bioactivities and potential pharmacological effects. However, the research of TCMs-CDs in biomedicine is not comprehensive, and their mechanisms have not been understood deeply either. In this review, we will provide concise insights into the recent development of TCMs-CDs, with a major focus on their preparation, formation, precursors, and bioactivities. Then we will discuss the perfect transformation from TCMs to TCMs-CDs. Finally, we discuss the opportunities and challenges for the application of TCMs-CDs in clinical treatment.

Synthesis of N,Si co-doped carbon dots to establish a fluorescent sensor for Hg(II) detection with triple signal output

Mercury is a heavy metal with extreme toxicity. Thus, it is of significance to develop an effective method for mercury ion detection with high performance. In this study, carbon dots doped with nitrogen and silicon (N,Si/CQDs) were successfully prepared from folic acid and N-[3-(trimethoxysily)propyl]-ethylenediamine. The N,Si/CQDs show an obvious cyan fluorescence of 460 nm with the radiation of 350 nm. The existence of mercury ions induces the fluorescence quenching of N,Si/CQDs due to photoinduced electron transfer, which was applied for the sensitive sensing of Hg(II). More importantly, the practical application of the N,Si/CQD probe was confirmed by measurements of Hg(II) in real samples of lake water, sorghum and rice. In addition, the N,Si/CQD nanoprobe was integrated on a sensing strip for specific detection of Hg(II). Quantitative measurement of Hg(II) was realized by the outstanding linearity between the diameter (or fluorescence intensity) of the fluorescence quenching ring and the concentration of mercury ions. The sensor shows potential for rapid detection with a triple signal readout on-site and represents a larger step towards practical applications.

Luminescence of carbon quantum dots and their application in biochemistry

Similar to fullerenes, carbon nanotubes and graphene, carbon dots (CDs) are causing a lot of research work in their own right. CDs are a type of surface-passivated quantum dot that contain carbon atoms. Their distinctive characteristics, such as luminescent emission that varies with size and wavelength, resistance to photobleaching, easy biological binding, lack of toxicity, and economical production without the need for intricate synthetic processes, have led to a noteworthy surge in attention within the research community. Different techniques can be utilized to create these CDs, spanning from basic candle burning to laser ablation. This review article delves into the principles of fluorescence technology, providing insights into how different synthesis methods of quantum dots impact their luminescent properties. Additionally, it highlights the latest applications of quantum dots in catalysis and biomedical fields, with special emphasis on the current status of luminescent properties in biology and chemistry. Towards the end, the article discusses the limitations of quantum dots in current practical applications, pointing out that CDs hold promising potential for future applications.

Ferromagnetic and half-metallic phase transition by doping in a one-dimensional narrow-bandgap W6PCl17 semiconductor

Based on first-principles calculations, we predict a one-dimensional (1D) semiconductor with cluster-type structure, namely phosphorus-centered tungsten chloride W6PCl17. The corresponding single-chain system can be prepared from its bulk counterpart by an exfoliation method and it exhibits good thermal and dynamical stability. 1D single-chain W6PCl17 is a narrow direct semiconductor with a bandgap of 0.58 eV. The unique electronic structure endows single-chain W6PCl17 with the p-type transport characteristic, manifested as a large hole mobility of 801.53 cm2 V-1 s-1. Remarkably, our calculations show that electron doping can easily induce itinerant ferromagnetism in single-chain W6PCl17 due to the extremely flat band feature near the Fermi level. Such ferromagnetic phase transition expectedly occurs at an experimentally achievable doping concentration. Importantly, a saturated magnetic moment of 1μB per electron is obtained over a large range of doping concentrations (from 0.02 to 5 electrons per formula unit), accompanied by the stable existence of half-metallic characteristics. A detailed analysis of the doping electronic structures indicates that the doping magnetism is mainly contributed by the d orbitals of partial W atoms. Our findings demonstrate that single-chain W6PCl17 is a typical 1D electronic and spintronic material expected to be synthesized experimentally in the future.

Recent developments in carbon dots: a biomedical application perspective

Recently, newly developed carbon-based nanomaterials known as carbon dots (CDs) have generated significant interest in nanomedicine. However, current knowledge regarding CD research in the biomedical field is still lacking. An overview of the most recent development of CDs in biomedical research is given in this review article. Several crucial CD applications, such as biosensing, bioimaging, cancer therapy, and antibacterial applications, are highlighted. Finally, CD-based biomedicine's challenges and future potential are also highlighted to enrich biomedical researchers' knowledge about the potential of CDs and the need for overcoming various technical obstacles.

Eco-Friendly and Sustainable Pathways to Photoluminescent Carbon Quantum Dots (CQDs)

Carbon quantum dots (CQDs), a new family of photoluminescent 0D NPs, have recently received a lot of attention. They have enormous future potential due to their unique properties, which include low toxicity, high conductivity, and biocompatibility and accordingly can be used as a feasible replacement for conventional materials deployed in various optoelectronic, biomedical, and energy applications. The most recent trends and advancements in the synthesizing and setup of photoluminescent CQDs using environmentally friendly methods are thoroughly discussed in this review. The eco-friendly synthetic processes are emphasized, with a focus on biomass-derived precursors. Modification possibilities for creating newer physicochemical properties among different CQDs are also presented, along with a brief conceptual overview. The extensive amount of writings on them found in the literature explains their exceptional competence in a variety of fields, making these nanomaterials promising alternatives for real-world applications. Furthermore, the benefits, drawbacks, and opportunities for CQDs are discussed, with an emphasis on their future prospects in this emerging research field.

Naturally Derived Carbon Dots In Situ Confined Self-Healing and Breathable Hydrogel Monolith for Anomalous Diffusion-Driven Phytomedicine Release

Fluorescent nanocarbons are well-proficient nanomaterials because of their optical properties and surface engineering. Herein, Apium graveolens-derived carbon dots (ACDs) have been synthesized by a one-step hydrothermal process without using any surplus vigorous chemicals or ligands. ACDs were captured via an in situ gelation reaction to form a semi-interpenetrating polymer network system showing mechanical robustness, fluorescent behavior, and natural adhesivity. ACDs-reinforced hydrogels were tested against robust uniaxial stress, repeated mechanical stretching, thixotropy, low creep, and fast strain recovery, confirming their elastomeric sustainability. Moreover, the room-temperature self-healing behavior was observed for the ACDs-reinforced hydrogels, with a healing efficacy of more than 45%. Water imbibition through hydrogel surfaces was digitally monitored via "breathing" and "accelerated breathing" behaviors. The phytomedicine release from the hydrogels was tuned by the ACDs' microstructure regulatory activity, resulting in better control of the diffusion rate compared to conventional chemical hydrogels. Finally, the phytomedicine-loaded hydrogels were found to be excellent bactericidal materials eradicating more than 85% of Gram-positive and -negative bacteria. The delayed network rupturing, superstretchability, fluorescent self-healing, controlled release, and antibacterial behavior could make this material an excellent alternative to soft biomaterials and soft robotics.

Construction of photo-induced zinc-doped carbon dots based on drug-resistant bactericides and their application for local treatment

In this project, we propose a highly effective photosensitizer that breaks through drug-resistant bacterial infections with zinc-doped carbon dots. By passing through the membrane of drug-resistant bacteria, the photosensitizers produce ROS in bacteria under the action of blue light to directly kill bacteria, so as to realize the antibacterial local treatment of drug-resistant bacteria. The experiment firstly uses an efficient one-step hydrothermal method to prepare zinc-doped red-light CDs as photosensitizers, in which zinc metal was doped to improve the optical properties of the CDs. Then we try first to use EDTA as a second-step attenuator for preparing CDs to obtain photosensitizers with high-efficiency and low toxicity. In vitro cytotoxicity tests, bacterial effect tests, and in vivo animal experiments have also demonstrated that this antibacterial method has great potential for clinical translation, with a bactericidal efficiency of up to 90%. More notably, we used this antibacterial regimen seven times repeatedly to simulate the bacterial resistance process, with a bactericidal efficiency of up to 90% every time. The result indicated that S. aureus did not develop resistance to our method, showing that our method has the potential to break through drug-resistant bacterial infections as an alternative to antibiotic candidates.

Fluorescence and Nonlinear Optical Response of Graphene Quantum Dots Produced by Pulsed Laser Irradiation in Toluene

Graphene quantum dots (GQDs), the zero dimensional (0D) single nanostructures, have many exciting technological applications in diversified fields such as sensors, light emitting devices, bio imaging probes, solar cells, etc. They are emerging as a functional tool to modulate light by means of molecular engineering due to its merits, including relatively low extend of loss, large outstretch of spatial confinement and control via doping, size and shape. In this article, we present a one pot, facile and ecofriendly synthesis approach for fabricating GQDs via pulsed laser irradiation of an organic solvent (toluene) without any catalyst. It is a promising synthesis choice to prepare GQDs due to its fast production, lack of byproducts and further purification, as well as the control over the product by accurate tuning of laser parameters. In this work, the second (532 nm) and third harmonic (355 nm) wavelengths of a pulsed nanosecond Nd:YAG laser have been employed for the synthesis. It has been found that the obtained GQDs display fluorescence and is expected to have potential applications in optoelectronics and light-harvesting devices. In addition, nonlinear optical absorption of the prepared GQDs was measured using the open aperture z-scan technique (in the nanosecond regime). These GQDs exhibit excellent optical limiting properties, especially those synthesized at 532 nm wavelength.

Potential Development of N-Doped Carbon Dots and Metal-Oxide Carbon Dot Composites for Chemical and Biosensing

Among carbon-based nanomaterials, carbon dots (CDs) have received a surge of interest in recent years due to their attractive features such as tunable photoluminescence, cost effectiveness, nontoxic renewable resources, quick and direct reactions, chemical and superior water solubility, good cell-membrane permeability, and simple operation. CDs and their composites have a large potential for sensing contaminants present in physical systems such as water resources as well as biological systems. Tuning the properties of CDs is a very important subject. This review discusses in detail heteroatom doping (N-doped CDs, N-CDs) and the formation of metal-based CD nanocomposites using a combination of matrices, such as metals and metal oxides. The properties of N-CDs and metal-based CDs nanocomposites, their syntheses, and applications in both chemical sensing and biosensing are reviewed.

Passivator-Free Microwave–Hydrothermal Synthesis of High Quantum Yield Carbon Dots for All-Carbon Fluorescent Nanocomposite Films

Based on the self-passivation function of chitosan, an efficient, and green synthesis strategy was applied to prepare chitosan carbon dots (CDs). The quantum yield of carbon dots reached 35% under the conditions of hydrothermal temperature of 200 °C, hydrothermal time of 5 h, and chitosan concentration of 2%. Moreover, the obtained carbon dots had high selectivity and sensitivity to Fe3+. Based on the Schiff base reaction between the aldehyde groups of dialdehyde cellulose nanofibrils (DNF) and the amino groups of CDs, a chemically cross-linked, novel, fluorescent composite film, with high transparency and high strength, was created using one-pot processing. Knowing that the fluorescence effect of the composite film on Fe3+ had a linear relationship in the concentration range of 0–100 μM, a fluorescent probe can be developed for quantitative analysis and detection of Fe3+. Owing to their excellent fluorescent and mechanical properties, the fluorescent nanocomposite films have potential applications in the fields of Fe3+ detection, fluorescent labeling, and biosensing.

One-pot hydrothermal synthesis of Si-doped carbon quantum dots with up-conversion fluorescence as fluorescent probes for dual-readout detection of berberine hydrochloride

Here, the high fluorescent silicon-doped carbon quantum dots (Si-CQDs) were prepared by a facile and one-pot hydrothermal assay using 3-aminopropyltrimethoxysilane as the carbon and silicon source. The prepared Si-CQDs exhibit favorable water-soluble, high-temperature resistance, acid resistance, alkali resistance, high ionic strength resistance, high photostability, film-forming ability and solid-state fluorescence. Compared to other Si-CQDs that have been reported, the prepared Si-CQDs show unique up-conversion fluorescence. Furthermore, it is found that berberine hydrochloride (BH) can effectively quench the down- and up-conversion fluorescence of the Si-CQDs, making it can be used as a highly sensitive and specific probe for BH dual-mode sensing. Meanwhile, the linear range of down-conversion fluorescence detection for BH is 0.5-30.0 µmol/L with a limit of detection (LOD) of 50 nmol/L, and the linear range of up-conversion fluorescence assay for BH is 0-25.0 µmol/L. The mechanism of down-conversion fluorescence quenching by BH was investigated through a series of studies. The results show the quenching mechanism is the inner filter effect (IFE). Moreover, this proposed strategy has been well used to analyze BH in urine samples with satisfactory results.

A novel polymeric fluorescence sensor based on acrylated citric acid for detection of melamine adulteration: Application in milk powder

Melamine selective acrylate citric acid (ACA) based polymeric membrane sensor was prepared by radical polymerization method and the sensor was characterized. The sensor showed a selective fluorescent response to melamine (λ_ex/λ_em = 388/425 nm). The sensor response is linear in the concentration range of 3.96 × 10^-9 to 7.93 × 10^-8 mol L^-1, the optimum pH value is 6.0 and response time is less than 1 min. Limit of detection (LOD) and limit of quantification (LOQ) were calculated as 2.32 × 10^-10 mol L^-1 and as 7.74 × 10^-10 mol L^-1, respectively. The sensor showed great selectivity towards melamine in the presence of a large number of molecules and ions. The performance of sensor was also confirmed by determining of melamine in milk powder sample and the results were compared with HPLC results and acceptable results were obtained. As a conclusion, the results revealed that the proposed sensor is an interesting alternative for melamine determination.

Carbon dots surface chemistry drives fluorescent properties: New tools to distinguish isobaric peptides

The possibility to design rational carbon dots surface functionalization for specific analytical and bioanalytical applications is hindered by the lack of a full knowledge of the surface chemical features driving fluorescent properties. In this model study, we have synthesized four different peptides, three of which are isobaric and not distinguishable by common MSMS experiments. After having characterized the peptides conformations by CD analyses, we have covalently bonded all four peptides to carbon dots by using different experimental procedures, which produce different functional groups on the carbon dots surface. The peptide orientations obtained on the differently functionalized surface of the nanoparticles were different and produced different fluorescent responses. The reported results indicate the possibility to design amino and carboxyl enriched surface carbon dots to answer specific chemical requirements, paving the way for the use of these nanoparticles as a versatile and useful new chemical and biochemical tool.

A label-free photoelectrochemical sensor of S, N co-doped graphene quantum dot (S, N-GQD)-modified electrode for ultrasensitive detection of bisphenol A

S, N co-doped graphene quantum dot (S, N-GQD) materials have been composited via a one-pot pattern and used as photosensitive materials to construct a label-free photoelectrochemical (PEC) sensor. The PEC experiments show an enhanced photocurrent response toward Bisphenol A (BPA) sensing due to the increased charge transfer rate and the enhanced absorption of visible light. Compared with dark conditions, the photocurrent signal (- 0.2 V vs. SCE) is greatly increased because of the effective oxidation of BPA by photogenerated holes and the rapid electron transfer of S, N-GQDs on the PEC sensing platform. Under optimal conditions linear current response to BPA is in two ranges of 0.12-5 µM and 5-40 µM. The limit of detection is 0.04 µM (S/N = 3). The designed sensor has enduring stability and admirable interference immunity. It  provides an alternative approach for BPA determination in real samples with recoveries of 99.3-103% and  RSD of 2.0-4.1%.

Silicon-Doped Graphene Oxide Quantum Dots as Efficient Nanoconjugates for Multifunctional Nanocomposites

Graphene oxide quantum dots (GOQDs) hold great promise as a new class of high-performance carbonaceous nanomaterials due to their numerous functional properties, such as tunable photoluminescence (PL), excellent thermal and chemical stability, and superior biocompatibility. In this study, we developed a facile, one-pot, and effective strategy to engineer the interface of GOQDs through covalent doping with silicon. The successful covalent attachment of the silane dopant with pendant vinyl groups to the edges of the GOQDs was confirmed by an in-depth investigation of the structural and morphological characteristics. The Si-GOQD nanoconjugates had an average dimension of ∼8 nm, with a graphite-structured core and amorphous carbon on their shell. We further used the infrared nanoimaging based on scattering-type scanning near-field optical microscopy to unveil the spectral near-field response of GOQD samples and to measure the nanoscale IR response of its network; we then demonstrated their distinct domains with strongly enhanced near fields. The doping of Si atoms into the sp²-hybridized graphitic framework of GOQDs also led to tailored PL emissions. We then sought to explore the potential applications of Si-GOQDs on the surface of plastic films where poly(dimethylsiloxane) (PDMS) served as a bridge to tightly anchor the Si-GOQDs to the surface. The bi-layered coated films which were built with co-assembly of Si-GOQDs and PDMS contributed to suppressing the transmission of water molecules due to the generation of compact and less accessible passing sites, achieving a nearly twofold reduction in water permeability compared to the single-layered coated films. The nanoindentation and PeakForce quantitative nanomechanical mapping showed that Si-GOQD-coated substrates were softer and more deformable than those coated only with PDMS. The co-assembly of PDMS and Si-GOQDs yielded films that were less stiff than those made from PDMS alone. Our findings provided conceptual insights into the importance of nanoscale surface engineering of GOQDs in conferring excellent dispersibility and enhancing the performance of nanocomposite films.

Synthesis of multicolor-emitting nitrogen–sulfur co-doped carbon dots and their photochemical studies for sensing applications

Photoluminescent carbon dots (CDs) possess several advantages, which include high stability and a non-toxicity that are essential in different applications such as catalysis, drug delivery, and sensors. The presence of heteroatoms modifies their physicochemical characteristics. In this work, a combination of CDs is manufactured utilizing a solvothermal technique using citric acid and thiourea. After separating each section using column chromatography, green and yellow CDs with average diameters of 8.3 and 7.0 nm, respectively, are generated. Next, optical and structural characterizations indicated that the variation in the emission color was caused by differences in surface functional groups rather than particle size. The photoelectrochemical properties are explored by including quinone derivatives and metal ions, which are quenchers for the CDs. The photoluminescence quenching results showed the presence of anionic functional groups on the surface of the CDs. Furthermore, these functional groups interacted strongly with particular types of metal ions, indicating that they may be employed as metal ion sensors.

Luminescent carbon dots (CDs) have been synthesized by a solvothermal approach and their photochemical properties are evaluated. Responses to specific metal ions are observed, and the relationship with surface functional groups is discussed.

Recent Advances in Nanozymes for Bacteria-Infected Wound Therapy

Bacterial-infected wounds are a serious threat to public health. Bacterial invasion can easily delay the wound healing process and even cause more serious damage. Therefore, effective new methods or drugs are needed to treat wounds. Nanozyme is an artificial enzyme that mimics the activity of a natural enzyme, and a substitute for natural enzymes by mimicking the coordination environment of the catalytic site. Due to the numerous excellent properties of nanozymes, the generation of drug-resistant bacteria can be avoided while treating bacterial infection wounds by catalyzing the sterilization mechanism of generating reactive oxygen species (ROS). Notably, there are still some defects in the nanozyme antibacterial agents, and the design direction is to realize the multifunctionalization and intelligence of a single system. In this review, we first discuss the pathophysiology of bacteria infected wound healing, the formation of bacterial infection wounds, and the strategies for treating bacterially infected wounds. In addition, the antibacterial advantages and mechanism of nanozymes for bacteria-infected wounds are also described. Importantly, a series of nanomaterials based on nanozyme synthesis for the treatment of infected wounds are emphasized. Finally, the challenges and prospects of nanozymes for treating bacterial infection wounds are proposed for future research in this field.

Carbon dot composites for bioapplications: a review

Recent advancements in the synthesis of carbon dot composites and their applications in biomedical fields (bioimaging, drug delivery and biosensing) have been carefully summarized. The current challenges and future trends of CD composites in this field have also been discussed.

Enzyme-free fluorescence determination of uric acid and trace Hg(II) in serum using Si/N doped carbon dots

A new fluorescence probe method for the detection of Hg(II) in serum was established, which has the detection limit of 3.57 nM and quantification limit of 5 nM, based on the electrostatic induced agglomeration quenching and complexation between Hg(II) and silicon-nitrogen-doped carbon nanodots (Si/N-CDs). Furthermore, the fluorescence probe also showed the satisfactory results in the determination of Hg(II) in human serum. Subsequently, take advantage of the uric acid (UA) to recover the fluorescence of the Si/N-CDs-Hg(II) complex probe, another enzyme-free ways to determine UA was developed. The complex probe can selectively detect the UA content in the 0.5-30 μM range, and its detection limit can reach 0.14 μM, which has successfully detected the UA in total serum, and the results were no significant difference comparing with the controls.

Ratiometric fluorescence probe of Cu2+ and biothiols by using carbon dots and copper nanoclusters

A novel dual-emission ratiometric fluorescent probe based on N-doped yellow fluorescent carbon dots (y-CDs) and blue fluorescent copper nanoclusters (CuNCs) was established for quantitative determination of Cu²⁺ and biothiols. In this work, the Cu²⁺-(y-CDs) complexes formed by the chelation of y-CDs with Cu²⁺, showed an absorption peak at 430 nm that not only enhanced the fluorescence of y-CDs through inhibiting photoinduced electron transfer (PET) but also effectively quenched the fluorescence of CuNCs due to Förster resonance energy transfer (FRET). In addition, the chelation of y-CDs with Cu²⁺ could be inhibited by biothiols that prevented the fluorescence of y-CDs from being enhanced and the fluorescence of CuNCs from being quenched. On account of the changes of ratiometric signal, a dual-emission fluorescence probe for Cu²⁺ and biothiols determination was achieved. The proposed method exhibited high sensitivity for Cu²⁺ and biothiols in the ranges of 0.5-100 μM and 0.8-50 μM and the limits of detection (LODs) of Cu²⁺, glutathione (GSH), cysteine (Cys) and homocysteine (Hcy) were 0.21 μM, 0.33 μM, 0.39 μM and 0.46 μM, respectively. Subsequently, the established strategy presented an application prospect for the detection of Cu²⁺ and biothiols in real samples.

One-Step Green Solvothermal Synthesis of Full-Color Carbon Quantum Dots Based on a Doping Strategy

Proposing a simple strategy for developing full-color carbon quantum dots (CQDs) and exploring how the luminescence can be tuned and improved is attractive and encouraging. Herein, blue, green, yellow-green, and orange-red CQDs doped with heteroatoms were synthesized in one pot and separated by column chromatography, with emission peaks of 435 nm, 495 nm [photoluminescence quantum yield (PLQY) of 88.9%], 525 nm, and 595 nm (full width at half-maximum of 31 nm), respectively. The abundant C-O/C-O-C electron donor groups greatly improve the PLQY of green CQDs, and the expended effective conjugated domains (particle size, doped chlorine, and conjugated nitrogen) of CQDs boost the red-shifts of emission spectra. Energy transfer (ET) in a concentrated mixed solution of CQDs was discovered, and possible ET mechanisms are proposed. Furthermore, a high-efficiency white light-emitting diode with Commission Internationale de L'Eclairage coordinates of (0.361, 0.369), a correlated color temperature of 4534 K, and a high color rendering index of 90.8 was fabricated.

Advances in the Methods for the Synthesis of Carbon Dots and Their Emerging Applications

Cutting-edge technologies are making inroads into new areas and this remarkable progress has been successfully influenced by the tiny level engineering of carbon dots technology, their synthesis advancement and impressive applications in the field of allied sciences. The advances of science and its conjugation with interdisciplinary fields emerged in carbon dots making, their controlled characterization and applications into faster, cheaper as well as more reliable products in various scientific domains. Thus, a new era in nanotechnology has developed into carbon dots technology. The understanding of the generation process, control on making processes and selected applications of carbon dots such as energy storage, environmental monitoring, catalysis, contaminates detections and complex environmental forensics, drug delivery, drug targeting and other biomedical applications, etc., are among the most promising applications of carbon dots and thus it is a prominent area of research today. In this regard, various types of carbon dot nanomaterials such as oxides, their composites and conjugations, etc., have been garnering significant attention due to their remarkable potential in this prominent area of energy, the environment and technology. Thus, the present paper highlights the role and importance of carbon dots, recent advancements in their synthesis methods, properties and emerging applications.

High-efficient and pH-sensitive orange luminescence from silicon-doped carbon dots for information encryption and bio-imaging

The exploration of carbon dots (CDs) with high quantum yield, facile synthesis path and satisfying output for their multiple applications remains a challenge. Thus, a silicon-doped orange-emitting carbon dots (O-CDs) is synthesized via a one-step hydrothermal method o-phenylenediamine and ethyl orthosilicate as raw materials. The O-CDs exhibits a bright and non-excitation-dependent emission peaking at 580 nm, and the corresponding quantum yield could be greatly boosted from 39.2 % to 64.1 % by silicon doping. The obtained O-CDs possess good biocompatibility and promising luminescence stability with varying solvents, ionic concentrations and temperatures. Its bio-imaging ability is performed by incubating zebrafish embryos with O-CDs aqueous solution, and clear in-vivo fluorescent images are obtained. Furthermore, due to its high-efficient and specific pH-sensitive emission with excellent dispersibility, the O-CDs can be used as a fluorescent ink for dual-model data encry/decryption in both hand-writing and stamp printing. Therefore, the as-prepared O-CDs show the potential as promising candidate for biomedical diagnosis, data encryption, and anti-counterfeiting.

A chemiluminescence probe enhanced by cobalt and nitrogen-doped carbon dots for the determination of a nitrosative stress biomarker

A chemiluminometric method is introduced for the determination of the stress biomarker, 3-nitrotyrosine (3-NT) based on the H₂O₂-NaIO₄ reaction enhanced by cobalt and nitrogen-doped carbon dots (Co,N-CDs). In this chemiluminescence (CL) system, the emission proved to be originated from the excited-state Co,N-CDs (λ_max = 504 nm). Comparing the effect of Co,N-CDs with that of some other metal ion-doped CDs and undoped CDs indicated the high efficiency of Co,N-CDs in the CL amplification (about 1980-fold). This was attributed to the fact that Co,N-CDs, in addition to other functions, could act as catalytic center, to accelerate the decomposition of H₂O₂ and to increase the number of hydroxyl radicals. It was found that 3-NT inhibits the action of Co,N-CDs by an electron transfer process, leading to a decline in the CL intensity of the system. Therefore, a new CL sensing platform was introduced for the assay of 3-NT in the range 5.0 to 300 nM with a detection limit of 1.5 nM. The probe was utilized for the analysis of biological samples.

Synthesis and modification of carbon dots for advanced biosensing application

There has been an explosion of interest in the use of nanomaterials for biosensing applications, and carbonaceous nanomaterials in particular are at the forefront of this explosion. Carbon dots (CDs), a new type of carbon material, have attracted extensive attention due to their fascinating properties, such as small particle size, tunable optical properties, good conductivity, low cytotoxicity, and good biocompatibility. These properties have enabled them to be highly promising candidates for the fabrication of various high-performance biosensors. In this review, we summarize the top-down and bottom-up synthesis routes of CDs, highlight their modification strategies, and discuss their applications in the fields of photoluminescence biosensors, electrochemiluminescence biosensors, chemiluminescence biosensors, electrochemical biosensors and fluorescence biosensors. In addition, the challenges and future prospects of the application of CDs for biosensors are also proposed.

One-step synthesis of blue-green luminescent carbon dots by a low-temperature rapid method and their high-performance antibacterial effect and bacterial imaging

Due to the global infection problem caused by the abuse of antibiotics, the preparation of novel antibacterial nanomaterials is a key and basic requirement for applications in antibacterial and bacterial imaging fields. This paper reports the one-step preparation of blue-green-emitting carbon dots (CDs) under low temperature (80 °C) with glucose as the carbon source, citric acid as the dehydrating agent, and polyethyleneimine as the nitrogen source. Through inhibition zone tests and minimum inhibitory concentration (MIC) experiments, the inhibitory abilities of prepared CDs against various microorganisms, including gram-positive bacteria, gram-negative bacteria and fungi, were compared. It is worth mentioning that the MIC of CDs against Staphylococcus aureus reaches 4.7 μg ml^-1, and the CDs exhibit excellent biocompatibility. Moreover, studies on visual-treatment therapy, in which infection treatment can be performed at the same time as bacterial imaging, with the prepared functional antibacterial CDs based on fluorescence confocal imaging would be beneficial to their promising future in medical and biological fields.

Organic dots (O-dots) for theranostic applications: preparation and surface engineering

Organic dots is a term used to represent materials including graphene quantum dots and carbon quantum dots because they rely on the presence of other atoms (O, H, and N) for their photoluminescence or fluorescence properties. They generally have a small size (as low as 2.5 nm), and show good photostability under prolonged irradiation. The excitation and emission wavelengths of O-dots can be tailored according to their synthetic procedure, where although their quantum yield is quite low compared with organic dyes, this is partly compensated by their large absorption coefficients. A wide range of strategies have been used to modify the surface of O-dots for passivation, improving their solubility and biocompatibility, and allowing the attachment of targeting moieties and therapeutic cargos. Hybrid nanostructures based on O-dots have been used for theranostic applications, particularly for cancer imaging and therapy. This review covers the synthesis, physics, chemistry, and characterization of O-dots. Their applications cover the prevention of protein fibril formation, and both controlled and targeted drug and gene delivery. Multifunctional therapeutic and imaging platforms have been reported, which combine four or more separate modalities, frequently including photothermal or photodynamic therapy and imaging and drug release.

Silicon-hybrid carbon dots derived from rice husk: promising fluorescent probes for trivalent rare earth element ions in aqueous media

As a novel fluorescence probe, Si–CDs could not only be applied to distinguish four groups of different rare earth element ions (REEs) but also exhibit a rapid and sensitive response towards individual Tb3+,Eu3+ and Dy3+.