Light-induced color changes of microgel-based etalons

Ionic Microgel Colloidal Crystals: Responsive Chromism in Dual Physical and Chemical Colors for High-End Information Security and Encryption

Chromic materials play a decisive and escalating role in information security. However, it is challenging to develop chromic materials for encryption technologies that can hardly be imitated. Inspired by versatile metachrosis in nature, a series of coumarin-based 7-(6-bromohexyloxy)-coumarin microgel colloidal crystals (BrHC MGCC) with multiresponsive chromism are able to be assembled by ionic microgels in poly(vinyl alcohol) (PVA) solution followed by two cycles of freezing-thawing. The ionic microgels can be finely tailored by in situ quaternization with tunable size under varied temperatures and hydration energies of counterions as well as quenched luminescence under UV irradiation, which endows BrHC MGCC with intriguing chromism in the dual-channel coloration of physical structural color and chemical fluorescent color. Three types of BrHC MGCC exhibit various change ranges in structural coloration and similar quenching in fluorescence emission, which can be utilized for the development of the static-dynamic combined anticounterfeiting system with dual coloration. The information conveyed by the BrHC MGCC array presents dynamic variation versus temperature, while the static information can be only integrally read in both sunlight and a 365 nm UV lamp. The fabrication of a microgel colloidal crystal with dual coloration opens a facile and ecofriendly window for multilevel information security, camouflage, and a cumbersome authentication process.

Dual Responsive Dependent Background Color Based on Thermochromic 1D Photonic Crystal Multilayer Films

In this paper, we present dual responsive one-dimensional (1D) photonic crystal (PC) multilayer films that utilize a high-humidity environment and temperature. Dual responsive 1D PC multilayer films are fabricated on precoated thermochromic film by sequential alternate layer deposition of photo-crosslinkable poly(2-vinylnaphthalene-co-benzophenone acrylate) (P(2VN-co-BPA)) as a high refractive index polymer, and poly(4-vinylpyrollidone-co-benzophenone acrylate) P(4VP-co-BPA) as a low refractive index polymer. The thermochromic film shows a vivid color transition from black to white at 28 °C. Three different colors of thermochromic 1D PC multilayer films are prepared by thickness modulation of P(4VP-co-BPA) layers, and the films on a black background exhibit visible spectrum color only in a high-humidity environment (over 90% relative humidity (RH)). For the three films placed on a hands display, three different composite colors are synthesized by the reflection of light, including yellow, magenta, and cyan, due to the changing of backgrounds from black to white with temperature. Additionally, the films show remarkable color transitions with reliable reversibility. The films can be applied as anti-counterfeiting labels and can be used for smart decoration films. To the best of our knowledge, this is the first report of dual response colorimetric films that change color in various ways depending on temperature and humidity changes, and we believe that it can be applied to various applications.

Molecular logic operations from complex coacervation with aggregation-induced emission characteristics

Leveraging complex coacervation of a polycation and a bivalent anion with aggregation-induced emission characteristics, we accomplish eight basic logic operations with environmental stimuli as inputs, producing Boolean-like fluorescence intensity or turbidity 'outputs' with contrast higher than one order of magnitude. Storage of information of a fluorescent pattern and thermo-sensor applications are also demonstrated.

Humidity-Controlled Tunable Emission in a Dye-Incorporated Metal-Hydrogel-Metal Cavity

Actively controllable photoluminescence is potent for a wide variety of applications from biosensing and imaging to optoelectronic components. Traditionally, methods to achieve active emission control are limited due to complex fabrication processes or irreversible tuning. Here, we demonstrate active emission tuning, achieved by changing the ambient humidity in a fluorescent dye-containing hydrogel integrated into a metal-insulator-metal (MIM) system. Altering the overlapping region of the MIM cavity resonance and the absorption and emission spectra of the dye used is the underlying principle to achieving tunability of the emission. We first verify this by passive tuning of cavity resonance and further experimentally demonstrate active tuning in both air and aqueous environments. The proposed approach is reversible, easy to integrate, and spectrally scalable, thus providing opportunities for developing tunable photonic devices.

Materials with Tunable Optical Properties for Wearable Epidermal Sensing in Health Monitoring

Advances in wearable epidermal sensors have revolutionized the way that physiological signals are captured and measured for health monitoring. One major challenge is to convert physiological signals to easily readable signals in a convenient way. One possibility for wearable epidermal sensors is based on visible readouts. There are a range of materials whose optical properties can be tuned by parameters such as temperature, pH, light, and electric fields. Herein, this review covers and highlights a set of materials with tunable optical properties and their integration into wearable epidermal sensors for health monitoring. Specifically, the recent progress, fabrication, and applications of these materials for wearable epidermal sensors are summarized and discussed. Finally, the challenges and perspectives for the next generation wearable devices are proposed.

Thermally Tunable Structural Coloration of Water/Surfactant/Oil Emulsions

Stimuli-responsive structural color in nature has fascinated scientists, directing them to develop artificial coloration materials that adjust colors in response to external stimuli. Many stimuli-responsive structural color materials have been realized. However, only a few have reported on all-liquid-type materials, which have a particularly desirable feature because they impart their function to the device of any shape. We have previously reported the development of a consistent structural color within a narrow temperature range for all-liquid-type emulsions comprising a long-chain amidoamine derivative (C18AA) and tetraoctylammonium bromide (TOAB). In the present study, we demonstrate that introducing NaCl as an electrolyte affords a highly thermo-sensitive color-changing ability to the emulsions. The structural color of the emulsions can be controlled from red to blue by tuning the temperature. Furthermore, the C18AA and TOAB concentrations can independently regulate the color and coloring-temperature, respectively, realizing that the desired color can develop at a given temperature.

Humidity- and Temperature-Tunable Metal-Hydrogel-Metal Reflective Filters

A tunable reflectance filter based on a metal-hydrogel-metal structure responsive to humidity and temperature is reported. The filter employs a poly(N-isopropylacrylamide)-acrylamidobenzophenone (PNIPAm-BP) hydrogel as an insulator layer in the metal-insulator-metal (MIM) assembly. The optical resonance of the structure is tunable by water immersion across the visible and near-infrared range. Swelling/deswelling and the volume phase transition of the hydrogel allow continuous reversible humidity- and/or temperature-induced tuning of the optical resonance. This work paves the way toward low-cost large-area fabrication of actively tunable reversible photonic devices.

Smart membranes by electron beam cross-linking of copolymer microgels

Poly(N-isopropylacrylamide) (pNIPAM) based copolymer microgels were used to create free-standing, transferable, thermoresponsive membranes. The microgels were synthesized by copolymerization of NIPAM with N-benzylhydrylacrylamide (NBHAM). Monolayers of these colloidal gels were subsequently cross-linked using an electron gun leading to the formation of a connected monolayer. Furthermore, the cross-linked microgel layer is detached from the supporting material by dissolving the substrate. These unique systems can be used as transferable, thermoresponsive coatings and as thermoresponsive membranes. As a proof of principle for the use of such membranes we studied the ion transport through them at different temperatures revealing drastic changes when the lower critical solution temperature of the copolymer microgels is reached.

Probing the response of poly (N-isopropylacrylamide) microgels to solutions of various salts using etalons

The Hofmeister series is a qualitative ordering of ions according to their ability to precipitate proteins in aqueous solution and is extremely important to consider when trying to understand materials and biomolecular structure and function. Herein, we utilized optical devices (etalons) composed of poly(N-isopropylacrylamide) (pNIPAm)-co-10% acrylic acid (AAc) or pNIPAm-based microgels to investigate how various salts in the Hofmeister series influenced the microgel hydration state. Etalons were exposed to a series of salts solutions at different concentrations and the position of the peaks in the reflectance spectra monitored using reflectance spectroscopy. As expected, pNIPAm-co-10%AAc microgel-based etalons responded to the presence of ions, although in this case the response to cations deviated from the Hofmeister series. However, when using etalons prepared with pNIPAm-based microgels, the responses followed the Hofmeister series for both cation and anions. Finally, we observed that the sensitivity of etalons prepared with pNIPAm microgels was significantly higher than the response obtained from etalons composed of pNIPAm-co-10%AAc microgels. This was explained by considering the charge on the pNIPAm-co-10%AAc microgels that influences how osmotic and Hofmeister effects impacts hydration state.

Imparting Photo-responsive Function to Thermo-responsive Iridescent Emulsions

In our previous paper, we reported that thermo-responsive emulsions can be prepared based on a long-chain amidoamine derivative (C18AA) and tetraoctylammonium bromide (TOAB), and that the C18AA + TOAB emulsions developed a characteristic interference color in a narrow temperature range. However, the coloration of the original C18AA + TOAB at room temperature exhibited poor brightness. In the present study, we show that the addition of NaOH is effective in both lowering the coloration temperature and improving the brightness of C18AA + TOAB emulsion considerably. Furthermore, we demonstrate that photo-response function can be imparted to C18AA + TOAB iridescent emulsions by introducing a photochromic naphthopyran derivative (Pyran) that reversibly changes from white to yellow upon UV irradiation. The C18AA + TOAB emulsions containing Pyran shows a dual stimuli-responsive iridescent property, and the emulsion color is controllable and reversible through both UV irradiation and temperature.

Bioinspired Stimuli-Responsive Color-Changing Systems

Stimuli-responsive colors are a unique characteristic of certain animals, evolved as either a method to hide from enemies and prey or to communicate their presence to rivals or mates. From a material science perspective, the solutions developed by Mother Nature to achieve these effects are a source of inspiration to scientists for decades. Here, an updated overview of the literature on bioinspired stimuli-responsive color-changing systems is provided. Starting from natural systems, which are the source of inspiration, a classification of the different solutions proposed is given, based on the stimuli used to trigger the color-changing effect.

Bioinspired Polymeric Photonic Crystals for High Cycling pH-Sensing Performance

Artificial photonic crystals (PCs) have been extensively studied to improve the sensing performance of poly(acrylic acid) (PAAc), as it can transform the PAAc volume change into optical signal which is easier to read. Nevertheless, these PCs are limited by the monostructure. We herein developed new photonic crystals (PCs) by coating acrylic acid and acrylamide (AAm) via in situ copolymerization onto Papilio paris wings having hierarchical, lamellar structure. Our PCs exhibited high performance of color tunability to environmental pH, as detected by reflectance spectra and visual observation. The introduction of AAm into the system created covalent bonding which robustly bridged the polymer with the wings, leading to an accurate yet broad variation of reflection wavelength to gauge environmental pH. The reflection wavelength can be tailored by the refractive index of the lamellar interspacing due to the swelling/deswelling of the polymer. The mechanism is not only supported by experimenta but proved by finite-difference time-domain simulation. Moreover, It is worth noting that the covalent bonding has provided the PCs-based pH sensor with high cycling performance, implying great potential in practical applications. The simple fabrication process is applicable to the development of a wide variety of stimuli-responsive PCs taking advantage of other polymers.

Stimuli-Responsive Assemblies for Sensing Applications

Poly (N-isopropylacrylamide) (pNIPAm)-based hydrogels and hydrogel particles (microgels) have been extensively studied since their discovery a number of decades ago. While their utility seems to have no limit, this feature article is focused on their development and application for sensing small molecules, macromolecules, and biomolecules. We highlight hydrogel/microgel-based photonic materials that have order in one, two, or three dimensions, which exhibit optical properties that depend on the presence and concentration of various analytes. A particular focus is put on one-dimensional materials developed in the Serpe Group.

Sequential and controlled release of small molecules from poly(N-isopropylacrylamide) microgel-based reservoir devices

Devices capable of releasing two different small molecules independently, at defined release kinetics, were prepared and their behavior characterized.

In situ cross-linking of stimuli-responsive hemicellulose microgels during spray drying

Chemical cross-linking during spray drying offers the potential for green fabrication of microgels with a rapid stimuli response and good blood compatibility and provides a platform for stimuli-responsive hemicellulose microgels (SRHMGs). The cross-linking reaction occurs rapidly in situ at elevated temperature during spray drying, enabling the production of microgels in a large scale within a few minutes. The SRHMGs with an average size range of ∼ 1-4 μm contain O-acetyl-galactoglucomannan as a matrix and poly(acrylic acid), aniline pentamer (AP), and iron as functional additives, which are responsive to external changes in pH, electrochemical stimuli, magnetic field, or dual-stimuli. The surface morphologies, chemical compositions, charge, pH, and mechanical properties of these smart microgels were evaluated using scanning electron microscopy, IR, zeta potential measurements, pH evaluation, and quantitative nanomechanical mapping, respectively. Different oxidation states were observed when AP was introduced, as confirmed by UV spectroscopy and cyclic voltammetry. Systematic blood compatibility evaluations revealed that the SRHMGs have good blood compatibility. This bottom-up strategy to synthesize SRHMGs enables a new route to the production of smart microgels for biomedical applications.

Stimuli-responsive microgel-based etalons for optical sensing

Responsive polymers have found numerous applications over the years. This review highlights their use as components of photonic materials, with emphasis on responsive polymer-based etalons. The use of these materials for sensing and biosensing is detailed.

Polymer brush-based optical device with multiple responsivities

Poly(N-isopropylacrylamide) brush-based optical materials were fabricated, and the tunability of their optical properties characterized.

A novel, smart microsphere with K(+)-induced shrinking and aggregating properties based on a responsive host-guest system

A novel type of smart microspheres with K(+)-induced shrinking and aggregating properties is designed and developed on the basis of a K(+)-recognition host-guest system. The microspheres are composed of cross-linked poly(N-isopropylacrylamide-co-acryloylamidobenzo-15-crown-5) (P(NIPAM-co-AAB15C5)) networks. Due to the formation of stable 2:1 "sandwich-type" host-guest complexes between 15-crown-5 units and K(+) ions, the P(NIPAM-co-AAB15C5) microspheres significantly exhibit isothermally and synchronously K(+)-induced shrinking and aggregating properties at a low K(+) concentration, while other cations (e.g., Na(+), H(+), NH4(+), Mg(2+), or Ca(2+)) cannot trigger such response behaviors. Effects of chemical compositions of microspheres on the K(+)-induced shrinking and aggregating behaviors are investigated systematically. The K(+)-induced aggregating sensitivity of the P(NIPAM-co-AAB15C5) microspheres can be enhanced by increasing the content of crown ether units in the polymeric networks; however, it is nearly not influenced by varying the monomer and cross-linker concentrations in the microsphere preparation. State diagrams of the dispersed-to-aggregated transformation of P(NIPAM-co-AAB15C5) microspheres in aqueous solutions as a function of temperature and K(+) concentration are constructed, which provide valuable information for tuning the dispersed/aggregated states of microspheres by varying environmental K(+) concentration and temperature. The microspheres with synchronously K(+)-induced shrinking and aggregating properties proposed in this study provide a brand-new model for designing novel targeted drug delivery systems.