Barnacle larvae exploring surfaces with variable hydrophilicity: influence of morphology and adhesion of "footprint" proteins by AFM

Measurement of the Adhesion Force of a Living Sessile Organism on Antifouling Coating Surfaces Prepared with Polysulfobetaine-Grafted Particles

An antifouling polymer brush-like structure was fabricated by a simple and versatile dip-coating method of sulfobetaine containing copolymer-grafted silica nanoparticles (SiNPs) and alkyl diiodide cross-linkers. Surface-initiated atom transfer radical copolymerization of 3-(N-2-methacryloyloxyethyl-N,N-dimethyl)ammonatopropanesulfonate (MAPS) and N,N-dimethylaminoethyl methacrylate (DMAEMA) was carried out from initiator-immobilized SiNPs to give poly(MAPS-co-DMAEMA)-grafted SiNPs (MAPS/DMAEMA = 9/1, mol/mol) with diameters of 150-170 nm. The SiNP-g-copolymer/2,2,2-trifluoroethanol solution was dip-coated on silicon and glass substrates. Successive treatment with 1,4-diiodobutane in methanol gave a hydrophilic cross-linked coating film for the SiNP-g-copolymer. The cross-linked particle brushes did not peel off from the substrate even after washing with water in an ultrasonic cleaner despite the simple physical absorption of the SiNP-g-copolymer on the substrate surface. The adhesion force of the tentacle of a living barnacle cyprid on a glass surface covered with the cross-linked SiNP-g-copolymer was directly measured by scanning probe microscopy in seawater. The coating film exhibited extremely low adhesion to the cypris larva in the seawater, expecting this to be an effective antifouling property.

Soy protein particles with enhanced anti-aggregation behaviors under various heating temperatures, pH, and ionic strengths

Protein-containing food products are frequently heated during processing to passivate anti-nutritional components. However, heating also contributes to protein aggregation and gelation, which limits its application in protein-based aqueous systems. In this study, heat-stable soy protein particles (SPPs) were fabricated by preheating at 120 °C for 30 min and at 0.5% (w/v) protein concentration. Compared to untreated soy proteins (SPs), SPPs exhibited a higher denaturation ratio, stronger conformational rigidity, compacter colloidal structure, and higher surface charge. The aggregation state of SPs and SPPs at various heating conditions (temperatures, pH, ionic strength, and types) was analyzed by dynamic light scattering, atomic force microscopy, and cryo-scanning electron microscopy. SPPs showed less increase in particle size and greater anti-aggregation ability than SPs. When heated in the presence of salt ions (Na⁺, Ca²⁺) or at acidic conditions, both SPs and SPPs formed larger spherical particles, but the size increase rate of SPPs was significantly lower than SPs. These findings provide theoretical information for preparing heat-stable SPPs. Furthermore, the development of SPPs is conducive to designing protein-enriched ingredients for producing innovative foods.

Insights into the Superior Bioavailability of Biogenic Sulfur from the View of Its Unique Properties: The Key Role of Trace Organic Substances

Elemental sulfur (S0) is widely utilized in environmental pollution control, while its low bioavailability has become a bottleneck for S0-based biotechnologies. Biogenic sulfur (bio-S0) has been demonstrated to have superior bioavailability, while little is known about its mechanisms thus far. This study investigated the bioavailability and relevant properties of bio-S0 based on the denitrifying activity of Thiobacillus denitrificans with chemical sulfur (chem-S0) as the control. It was found that the conversion rate and removal efficiency of nitrate in the bio-S0 system were 2.23 and 2.04 times those of the chem-S0 system. Bio-S0 was not pure orthorhombic sulfur [S: 96.88 ± 0.25% (w/w)]. Trace organic substances detected on the bio-S0 surface were revealed to contribute to its hydrophilicity, resulting in better dispersibility in the aqueous liquid. In addition, the adhesion force of T. denitrificans on bio-S0 was 1.54 times that of chem-S0, endowing a higher bacterial adhesion efficiency on the sulfur particle. The weaker intermolecular binding force due to the low crystallinity of bio-S0 led to enhanced cellular uptake by attached bacteria. The mechanisms for the superior bioavailability of bio-S0 were further proposed. This study provides a comprehensive view of the superior bioavailability of bio-S0 and is beneficial to developing high-quality sulfur resources.

The movement and settlement behaviour of cyprids of Balanus reticulatus on the surfaces of the titanium alloys

The motion paths of Balanus reticulatus cyprids were similar on all the titanium alloys surfaces. On the parallel grinding surfaces, the temporary attachment duration and the settlement ratio of the cyprids were influenced by the roughness and the composition of the surfaces and correlated positively. The surface roughness could also change the contact area and the numbers of the attachment points of the cyprids in the similar pattern. Consequently, the roughness and the composition of the surfaces regulated the cyprid settlement by the temporary attachment duration. The cross grinding increased the temporary attachment duration but drastically decreased the settlement ratio to 0 compared to the parallel grinding, possibly due to the voids and the drastic decrease of the contact area and the numbers of the attachment points of the cyprids on the cross grinding surface, respectively. The cross grinding therefore significantly reduced the cyprid settlement compared to the parallel grinding.

Grooming of fouling-release coatings to control marine fouling and determining how grooming affects the surface

Grooming may be an effective technique to control marine biofouling without damaging the coating or discharging active ingredients into the environment. This study assessed the grooming performance of three experimental biocide-free siloxane polyurethane (SiPU) fouling-release coatings. Coatings were statically immersed in Port Canaveral, Florida, and groomed every two weeks for five months using three different brush types. The ungroomed panels became heavily fouled with biofilm, tubeworms, barnacles, and bryozoans. Two of the brushes were able to control the fouling with a coverage of <5%. The commercial silicone elastomer coating was damaged from grooming procedures, while the SiPU coatings were not. Laboratory biological assays were carried out and mirrored the grooming results. Through surface characterization techniques, it was concluded that the coatings were unaffected by the grooming procedures. This study shows that marine fouling on durable SiPU fouling-release coatings can be controlled via grooming without damage or changing the surface properties.

Adhesion force evolution of protein on the surfaces with varied hydration extent: Quantitative determination via atomic force microscopy

The adhesion force evolution of protein on surfaces with continuously varied hydrophobicity/hydration layer has not been completely clarified yet, limiting the further development of environmental applications such as membrane anti-biofouling and selective adsorption of the functional surfaces. Herein, chemical force spectroscopy using atomic force microscopy (AFM) was utilized to quantify the evolution of the adhesion forces of protein on hydration surfaces in water, where bovine serum albumin (BSA) was immobilized on an AFM tip as the representative protein. The stiffness, roughness and charge properties of the substrate surfaces were kept constant and the hydrophobicity was the only variant to monitor the role of hydrated water layers in protein adhesion. The adhesion force increased non-monotonically as a function of hydrophobicity of substrate surfaces, which was related to the concentration of humic acid, and independent of pH values and ionic strength. The non-monotonic variation occurred in the range of contact angle at 60-80° due to the mutual restriction between solid-liquid interface energy and solid-solid interface energy. Hydrophobic attraction was the dominant force that drove adhesion of BSA to these model substrate surfaces, but the passivation of hydration layers at the interface could weaken the hydrophobic attraction. In contrast to the measurements in water, the adhesion forces decreased as a function of surface hydrophobicity when measured in air, because capillary forces from condensation water dominated adhesion forces. The passivation of hydration layers of protein was revealed by quantitatively determining the evolution of adhesion forces on the hydration surfaces of varying hydrophobicity, which was ignored by traditional adhesion theory.

Reduced Adhesive Force Leading to Enhanced Thermal Stability of Soy Protein Particles by Combined Preheating and Ultrasonic Treatment

Developing liquid systems with high protein contents is drawing intensive attention; however, this is challenged by heat-induced aggregation and gelation of proteins. Herein, we described a facile but robust approach of combined preheating and ultrasonic treatment (CPUT) to fabricate soy protein particles (SPPs) with enhanced heat stability. Results showed that these heat-stable particles, upon reheating at 1% (w/v), showed antiaggregation property evidenced from no obvious changes of the particle size distributions of suspensions. Besides, no gelation was found in the reheated test for SPPs suspended even at a concentration of 10% (w/v). In contrast, the control formed sol-gel after heating. The rearrangements of soy protein molecules by CPUT led to the formation of SPPs with reduced surface energy, which was primarily responsible for their heat stability. These findings highlighted that the CPUT could prepare thermally stable soy proteins, providing insights into the application of soy proteins in protein-enriched beverages.

Nanoscale Profiling of 2D Surface Hydrophobicity Recognition of Environmental Media via AFM Measurements In Situ

The surface hydrophobicity and its heterogeneity are essential physicochemical properties of functional materials and environmental media, which directly influence many critical processes, such as the adsorption capacity of absorbents, water/fertilizer retention of soil and oil-water separation performances of membranes. The conventional method to characterize the surface hydrophobicity is based on the water/air/oil contact angle, which could only analyze the macroscale local hydrophobicity of the surfaces. Until now, it is impossible to profile two-dimensional surface hydrophobicity recognition in the nanoscale. Here we utilized an atomic force microscopy (AFM)-based chemical force spectroscopy to measure the topography and the local adhesion forces in the nanoscale. A novel approach is established to exploit adhesion forces to extract the hydrophobic attractions, enabling mapping of the surface hydrophobicity of environmental media in the nanoscale, which was validated by studying synthetic self-assembled monolayers of known composition. The new method was then applied to directly measure the hydrophobicity of porous biochar particles, to profile two-dimensional nanoscale hydrophobicity images of graphene oxide, and to observe the in situ variations of the graphite surface hydrophobicity in the adsorption process of benzylamine, which cannot be monitored by the conventional methods. The advantages of direct observations of the surface hydrophobicity recognition from a single AFM image dynamically and quantitatively may provide an in-depth insight into the surface hydrophobicity in the nanoscale.

Brush Swelling and Attachment Strength of Barnacle Adhesion Protein on Zwitterionic Polymer Films as a Function of Macromolecular Structure

The exceptional hydration of sulfobetaine polymer brushes and their resistance toward nonspecific protein absorption allows for the construction of thin films with excellent antibiofouling properties. In this work, swollen sulfobetaine brushes, prepared by surface-initiated atom transfer radical polymerization of two monomers, differentiated by the nature of the polymerizable group, are studied and compared by a liquid-cell atomic force microscopy technique and spectroscopic ellipsometry. Colloidal AFM-based force spectroscopy is employed to estimate brush grafting density and characterize nanomechanical properties in salt water. When the ionic strength-induced swelling behaviors of the two systems are compared, the differences observed on the antipolyelectrolyte response can be correlated with the stiffness variation on brush compression, likely to be promoted by solvation differences. The higher solvation of amide groups is proposed to be responsible for the lower adhesion force of the barnacle cyprid's temporary adhesive proteins. The adhesion results provide further insights into the antibiofouling activity against barnacle cyprid settlement attributed to polysulfobetaine brushes.

Self-Assembled Nanofibers for Strong Underwater Adhesion: The Trick of Barnacles

Developing adhesives that can function underwater remains a major challenge for bioengineering, yet many marine creatures, exemplified as mussels and barnacles, have evolved their unique proteinaceous adhesives for strong wet adhesion. The mechanisms underlying the strong adhesion of these natural adhesive proteins provide rich information for biomimetic efforts. Here, combining atomic force microscopy (AFM) imaging and force spectroscopy, we examine the effects of pH on the self-assembly and adhesive properties of cp19k, a key barnacle underwater adhesive protein. For the first time, we confirm that the bacterial recombinant Balanus albicostatus cp19k (rBalcp19k), which contains no 3,4-dihydroxyphenylalanine (DOPA) or any other amino acids with post-translational modifications, can self-assemble into aggregated nanofibers at acidic pHs. Under moderately acidic conditions, the adhesion strength of unassembled monomeric rBalcp19k on mica is only slightly lower than that of a commercially available mussel adhesive protein mixture, yet the adhesion ability of rBalcp19k monomers decreases significantly at increased pH. In contrast, upon preassembly at acidic and low-salinity conditions, rBalcp19k nanofibers keep stable in basic and high-salinity seawater and display much stronger adhesion and thus show resistance to its adverse impacts. Besides, we find that the adhesion ability of Balcp19k is not impaired when it is combined with an N-terminal Thioredoxin (Trx) tag, yet whether the self-assembly property will be disrupted is not determined. Collectively, the self-assembly-enhanced adhesion presents a previously unexplored mechanism for the strong wet adhesion of barnacle cement proteins and may lead to the design of barnacle-inspired adhesive materials.

Immobilization of catalytic virus-like particles in a flow reactor

A functional microfluidic reactor is constructed by the immobilization of gold containing virus-based protein cages that catalyze the reduction of nitro-arenes with high efficiency.

Dominant Albumin-Surface Interactions under Independent Control of Surface Charge and Wettability

Understanding protein adsorption behaviors on solid surfaces constitutes an important step toward development of efficacious and biocompatible medical devices. Both surface charge and wettability have been shown to influence protein adsorption attributes, including kinetics, quantities, deformation, and reversibility. However, determining the dominant interaction in these surface-induced phenomena is challenging because of the complexity of inter-related mechanisms at the liquid/solid interface. Herein, we reveal the dominant interfacial forces in these essential protein adsorption attributes under the influence of a combination of surface charge and wettability, using quartz crystal microbalance with dissipation monitoring and atomic force microscopy-based force spectroscopy on a series of model surfaces. These surfaces were fabricated via layer-by-layer assembly, which allowed two-dimensional control of surface charge and wettability with minimal cross-parameter dependency. We focused on a soft globular protein, bovine serum albumin (BSA), which is prone to conformational changes during adsorption. The information obtained from the two techniques shows that both surface charge and hydrophobicity can increase the protein-surface interaction forces and the adsorbed amount. However, surface hydrophobicity triggered a greater extent of deformation in the adsorbed BSA molecules, leading to more dehydration, spreading, and resistance to elution by ionic strength changes regardless of the surface charge. The role played by the surface charge in the adsorbed protein conformation and extent of desorption induced by changes in the ionic strength is secondary to that of surface hydrophobicity. These findings advance the understanding of how surface chemistry and properties can be tailored for directing protein-substrate interactions.

A novel assessment of the traction forces upon settlement of two typical marine fouling invertebrates using PDMS micropost arrays

Marine biofouling poses a severe threat to maritime and aquaculture industries. To prevent the attachment of marine biofouling organisms on man-made structures, countless cost and effort was spent annually. In particular, most attention has been paid on the development of efficient and environmentally friendly fouling-resistant coatings, as well as larval settlement mechanism of several major biofouling invertebrates. In this study, polydimethylsiloxane (PDMS) micropost arrays were utilized as the settlement substrata and opposite tractions were identified during early settlement of the barnacle Amphibalanus amphitrite and the bryozoan Bugula neritina The settling A. amphitrite pushed the periphery microposts with an average traction force of 376.2 nN, while settling B. neritina pulled the periphery microposts with an average traction force of 205.9 nN. These micropost displacements are consistent with the body expansion of A. amphitrite during early post-settlement metamorphosis stage and elevation of wall epithelium of B. neritina during early pre-ancestrula stage, respectively. As such, the usage of micropost array may supplement the traditional histological approach to indicate the early settlement stages or even the initiation of larval settlement of marine fouling organisms, and could finally aid in the development of automatic monitoring platform for the real-time analysis on this complex biological process.

Effect of Variations in Micropatterns and Surface Modulus on Marine Fouling of Engineering Polymers

We report on the marine fouling and fouling release effects caused by variations of surface mechanical properties and microtopography of engineering polymers. Polymeric materials were covered with hierarchical micromolded topographical patterns inspired by the shell of the marine decapod crab Myomenippe hardwickii. These micropatterned surfaces were deployed in field static immersion tests. PDMS, polyurethane, and PMMA surfaces with higher elastic modulus and hardness were found to accumulate more fouling and exhibited poor fouling release properties. The results indicate interplay between surface mechanical properties and microtopography on antifouling performance.

Fouling-Release Performance of Silicone Oil-Modified Siloxane-Polyurethane Coatings

The effect of incorporation of silicone oils into a siloxane-polyurethane fouling-release coatings system was explored. Incorporation of phenylmethyl silicone oil has been shown to improve the fouling-release performance of silicone-based fouling-release coatings through increased interfacial slippage. The extent of improvement is highly dependent upon the type and composition of silicone oil used. The siloxane-polyurethane (SiPU) coating system is a tough fouling-release solution, which combines the mechanical durability of polyurethane while maintaining comparable fouling-release performance with regard to commercial standards. To further improve the fouling-release performance of the siloxane-PU coating system, the use of phenylmethyl silicones oils was studied. Coatings formulations were prepared incorporating phenylmethyl silicone oils having a range of compositions and viscosities. Contact angle and surface energy measurements were conducted to evaluate the surface wettability of the coatings. X-ray photoelectron spectroscopy (XPS) depth profiling experiments demonstrated self-stratification of silicone oil along with siloxane to the coating-air interface. Several coating formulations displayed improved or comparable fouling-release performance to commercial standards during laboratory biological assay tests for microalgae (Navicula incerta), macroalgae (Ulva linza), adult barnacles (Balanus amphitrite syn. Amphibalanus amphitrite), and mussels (Geukensia demissa). Selected silicone-oil-modified siloxane-PU coatings also demonstrated comparable fouling-release performance in field immersion trials. In general, modifying the siloxane-PU fouling-release coatings with a small amount (1-5 wt % basis) of phenylmethyl silicone oil resulted in improved performance in several laboratory biological assays and in long-term field immersion assessments.

Measuring protein isoelectric points by AFM-based force spectroscopy using trace amounts of sample

Protein charge at various pH and isoelectric point (pI) values is important in understanding protein function. However, often only trace amounts of unknown proteins are available and pI measurements cannot be obtained using conventional methods. Here, we show a method based on the atomic force microscope (AFM) to determine pI using minute quantities of proteins. The protein of interest is immobilized on AFM colloidal probes and the adhesion force of the protein is measured against a positively and a negatively charged substrate made by layer-by-layer deposition of polyelectrolytes. From the AFM force-distance curves, pI values with an estimated accuracy of ±0.25 were obtained for bovine serum albumin, myoglobin, fibrinogen and ribonuclease A over a range of 4.7-9.8. Using this method, we show that the pI of the 'footprint' of the temporary adhesive proteins secreted by the barnacle cyprid larvae of Amphibalanus amphitrite is in the range 9.6-9.7.

Engineered, Robust Polyelectrolyte Multilayers by Precise Control of Surface Potential for Designer Protein, Cell, and Bacteria Adsorption

Cross-linked layer-by-layer (LbL) assemblies with a precisely tuned surface ζ-potential were fabricated to control the adsorption of proteins, mammalian cells, and bacteria for different biomedical applications. Two weak polyions including a synthesized polyanion and polyethylenimine were assembled under controlled conditions and cross-linked to prepare three robust LbL films as model surfaces with similar roughness and water affinity but displaying negative, zero, and positive net charges at the physiological pH (7.4). These surfaces were tested for their abilities to adsorb proteins, including bovine serum albumin (BSA) and lysozyme (LYZ). In the adsorption tests, the LbL films bind more proteins with opposite charges but less of those with like charges, indicating that electrostatic interactions play a major role in protein adsorption. However, LYZ showed higher nonspecific adsorption than BSA, because of the specific behavior of LYZ molecules, such as stacked multilayer formation during adsorption. To exclude such stacking effects from experiments, protein molecules were covalently immobilized on AFM colloidal probes to measure the adhesion forces against the model surfaces utilizing direct protein molecule-surface contacts. The results confirmed the dominating role of electrostatic forces in protein adhesion. In fibroblast cell and bacteria adhesion tests, similar trends (high adhesion on positively charged surfaces, but much lower on neutral and negatively charged surfaces) were observed because the fibroblast cell and bacterial surfaces studied possess negative potentials. The cross-linked LbL films with improved stability and engineered surface charge described in this study provide an excellent platform to control the behavior of different charged objects and can be utilized in practical biomedical applications.

Polyion multilayers with precise surface charge control for antifouling

We report on a molecular fabrication approach to precisely control surface ζ potentials of polymeric thin layers constructed by electrostatic layer-by-layer (LbL) assembly methods. The protocol established allows us to achieve surface isoelectric points (IEP) in the pH range of 6-10. Poly(acrylic acid) (PAA, a weak polyanion) and poly(diallyldimethylammonium chloride) (PDADMAC, a strong polycation) were chosen to build up the bulk films. The weak polycation polyethylenimine (PEI) was applied as a top layer. A unique feature of this approach is that the chemical composition of the top layer is not affected by the manipulation of the ζ potential of the films. Surface charge tuning is achieved by controlling the degree of ionization of the weak polyelectrolytes at various pH values and subsequent manipulation of the amount of polyelectrolyte deposited in the penultimate and last layers, respectively. Following assembly and characterization, the films were used as candidates for antifouling surfaces. The fouling behavior of barnacle cyprids and bacteria on the LbL films with similar hydrophilicity and roughness but different surface charge densities were studied. We found that more cyprids of Amphibalanus amphitrite settled on the negatively charged LbL film compared to the neutral or positively charged LbL film. In bacterial adhesion tests employing Pseudomonas, Escherichia coli, and Staphylococcus aureus, more bacteria were observed on the positively charged LbL film compared with the neutral and negatively charged LbL films, possibly as a result of the negative potential of the bacterial cell wall. The procedures proposed allow one to adjust surface isoelectric points of LbL architectures to achieve optimal antifouling performance of a given material taking into account specific pH values of the environment and the character of the fouler.