Photolabeling identifies position 172 of the human AT(1) receptor as a ligand contact point: receptor-bound angiotensin II adopts an extended structure

Investigating the Bioactive Conformation of Angiotensin II Using Markov State Modeling Revisited with Web-Scale Clustering

Molecular dynamics simulation is a powerful technique for studying the structure and dynamics of biomolecules in atomic-level detail by sampling their various conformations in real time. Because of the long timescales that need to be sampled to study biomolecular processes and the big and complex nature of the corresponding data, relevant analyses of important biophysical phenomena are challenging. Clustering and Markov state models (MSMs) are efficient computational techniques that can be used to extract dominant conformational states and to connect those with kinetic information. In this work, we perform Molecular Dynamics simulations to investigate the free energy landscape of Angiotensin II (AngII) in order to unravel its bioactive conformations using different clustering techniques and Markov state modeling. AngII is an octapeptide hormone, which binds to the AT1 transmembrane receptor, and plays a vital role in the regulation of blood pressure, conservation of total blood volume, and salt homeostasis. To mimic the water-membrane interface as AngII approaches the AT1 receptor and to compare our findings with available experimental results, the simulations were performed in water as well as in water-ethanol mixtures. Our results show that in the water-ethanol environment, AngII adopts more compact U-shaped (folded) conformations than in water, which resembles its structure when bound to the AT1 receptor. For clustering of the conformations, we validate the efficiency of an inverted-quantized k-means algorithm, as a fast approximate clustering technique for web-scale data (millions of points into thousands or millions of clusters) compared to k-means, on data from trajectories of molecular dynamics simulations with reasonable trade-offs between time and accuracy. Finally, we extract MSMs using various clustering techniques for the generation of microstates and macrostates and for the selection of the macrostate representatives.

Levels of angiotensin II type-1 receptor antibodies and endothelin-1 type-A receptor antibodies correlate with antibody-mediated rejection and poor graft function in kidney-transplantation patients

OBJECTIVE

Angiotensin II type-1 receptor antibodies (AT1R-Ab) and endothelin-1 type-A receptor antibodies (ETAR-Ab) are non-human leukocyte antigen (HLA) antibodies that can elicit adverse effects on kidney transplantation (KT) outcomes. We investigated the correlation between levels of AT1R-Ab and ETAR-Ab and postoperative outcomes in KT recipients.

METHODS

Pre-KT and post-KT serum from 79 patients was collected. Post-KT serum was collected within 1 year after KT or simultaneously as the biopsy. Levels of AT1R-Ab and ETAR-Ab were measured using enzyme-linked immunosorbent assay kits. AT1R-Ab >17.0 U/mL and ETAR-Ab >10.0 U/mL was considered to denote positivity according to manufacturer recommendations. We measured donor-specific antibodies against human leukocyte antigens (HLA-DSA) levels using LABScreen™ single-antigen kits.

RESULTS

Seventy-nine (54 men, 25 women) formed the study cohort. Seven (8.7%) patients were positive for AT1R-Ab, 25 (31.6%) patients were positive for both AT1R-Ab and ETAR-Ab, and 47 (59.5%) were negative for both antibodies at all time points. No patients died during the study period. Patients with both AT1R-Ab and ETAR-Ab were associated with a higher prevalence of antibody-mediated rejection (AMR) and lower estimated glomerular filtration rate, but not allograft loss or delayed graft function. AT1R-Ab were associated with T-cell-mediated rejection, but the association was not significant. HLA-DSA were associated significantly with a higher creatinine level in serum at 12 months and 24 months in patients with AT1R-Ab and/or ETAR-Ab.

CONCLUSIONS

AT1R-Ab, ETAR-Ab, and HLA-DSA were associated with a higher prevalence of AMR and decline in graft function. Measurement of levels of AT1R-Ab and ETAR-Ab in KT patients may be useful for stratification of immunological risk and identification of patients at a high risk of adverse graft outcome.

Antibodies against Angiotensin II Type 1 and Endothelin A Receptors: Relevance and pathogenicity

Antibodies against two G-protein coupled receptors (GPCRs), angiotensin II type 1 receptor (AT1R) and endothelin A receptor (ETAR) are among a growing number of autoantibodies that are found to be associated with allograft dysfunction. AT1R antibodies (AT1Rabs) and ETAR antibodies (ETARabs) have been shown to activate their target receptors and affect signaling pathways. Multiple single center reports have shown an association between presence of these antibodies and acute or chronic rejection and graft loss in kidney, heart, liver, lung and composite tissue transplantations. However, the characteristics of patients that are most likely to develop adverse outcomes, the phenotypes associated with graft damage solely due to these antibodies, and the antibody titer required to cause dysfunction are areas that remain controversial. This review compiles existing knowledge on the effect of antibodies against GPCRs in other diseases in order to bridge the gap in knowledge within transplantation biology. Future areas for research are highlighted and include the need for functional assays and treatment protocols for transplant patients who present with AT1Rabs and ETARabs. Understanding how antibodies that activate GPCRs influence transplantation outcome will have direct clinical implications for preemptive evaluation of transplant candidates as well as the post-transplant care of organ recipients.

The Life of Pi Star: Exploring the Exciting and Forbidden Worlds of the Benzophenone Photophore

The widespread applications of benzophenone (BP) photochemistry in biological chemistry, bioorganic chemistry, and material science have been prominent in both academic and industrial research. BP photophores have unique photochemical properties: upon n-π* excitation at 365 nm, a biradicaloid triplet state is formed reversibly, which can abstract a hydrogen atom from accessible C-H bonds; the radicals subsequently recombine, creating a stable covalent C-C bond. This light-directed covalent attachment process is exploited in many different ways: (i) binding/contact site mapping of ligand (or protein)-protein interactions; (ii) identification of molecular targets and interactome mapping; (iii) proteome profiling; (iv) bioconjugation and site-directed modification of biopolymers; (v) surface grafting and immobilization. BP photochemistry also has many practical advantages, including low reactivity toward water, stability in ambient light, and the convenient excitation at 365 nm. In addition, several BP-containing building blocks and reagents are commercially available. In this review, we explore the "forbidden" (transitions) and excitation-activated world of photoinduced covalent attachment of BP photophores by touring a colorful palette of recent examples. In this exploration, we will see the pros and cons of using BP photophores, and we hope that both novice and expert photolabelers will enjoy and be inspired by the breadth and depth of possibilities.

International Union of Basic and Clinical Pharmacology. XCIX. Angiotensin Receptors: Interpreters of Pathophysiological Angiotensinergic Stimuli [corrected]

The renin angiotensin system (RAS) produced hormone peptides regulate many vital body functions. Dysfunctional signaling by receptors for RAS peptides leads to pathologic states. Nearly half of humanity today would likely benefit from modern drugs targeting these receptors. The receptors for RAS peptides consist of three G-protein-coupled receptors—the angiotensin II type 1 receptor (AT1 receptor), the angiotensin II type 2 receptor (AT2 receptor), the MAS receptor—and a type II trans-membrane zinc protein—the candidate angiotensin IV receptor (AngIV binding site). The prorenin receptor is a relatively new contender for consideration, but is not included here because the role of prorenin receptor as an independent endocrine mediator is presently unclear. The full spectrum of biologic characteristics of these receptors is still evolving, but there is evidence establishing unique roles of each receptor in cardiovascular, hemodynamic, neurologic, renal, and endothelial functions, as well as in cell proliferation, survival, matrix-cell interaction, and inflammation. Therapeutic agents targeted to these receptors are either in active use in clinical intervention of major common diseases or under evaluation for repurposing in many other disorders. Broad-spectrum influence these receptors produce in complex pathophysiological context in our body highlights their role as precise interpreters of distinctive angiotensinergic peptide cues. This review article summarizes findings published in the last 15 years on the structure, pharmacology, signaling, physiology, and disease states related to angiotensin receptors. We also discuss the challenges the pharmacologist presently faces in formally accepting newer members as established angiotensin receptors and emphasize necessary future developments.

Structural determinants for binding, activation, and functional selectivity of the angiotensin AT1 receptor

The renin-angiotensin system (RAS) plays an important role in the pathophysiology of cardiovascular disorders. Pharmacologic interventions targeting the RAS cascade have led to the discovery of renin inhibitors, angiotensin-converting enzyme inhibitors, and AT(1) receptor blockers (ARBs) to treat hypertension and some cardiovascular and renal disorders. Mutagenesis and modeling studies have revealed that differential functional outcomes are the results of multiple active states conformed by the AT(1) receptor upon interaction with angiotensin II (Ang II). The binding of agonist is dependent on both extracellular and intramembrane regions of the receptor molecule, and as a consequence occupies more extensive area of the receptor than a non-peptide antagonist. Both agonist and antagonist bind to the same intramembrane regions to interfere with each other's binding to exhibit competitive, surmountable interaction. The nature of interactions with the amino acids in the receptor is different for each of the ARBs given the small differences in the molecular structure between drugs. AT(1) receptors attain different conformation states after binding various Ang II analogues, resulting in variable responses through activation of multiple signaling pathways. These include both classical and non-classical pathways mediated through growth factor receptor transactivations, and provide cross-communication between downstream signaling molecules. The structural requirements for AT(1) receptors to activate extracellular signal-regulated kinases 1 and 2 through G proteins, or G protein-independently through β-arrestin, are different. We review the structural and functional characteristics of Ang II and its analogs and antagonists, and their interaction with amino acid residues in the AT(1) receptor.

Structure of the human angiotensin II type 1 (AT1) receptor bound to angiotensin II from multiple chemoselective photoprobe contacts reveals a unique peptide binding mode

Breakthroughs in G protein-coupled receptor structure determination based on crystallography have been mainly obtained from receptors occupied in their transmembrane domain core by low molecular weight ligands, and we have only recently begun to elucidate how the extracellular surface of G protein-coupled receptors (GPCRs) allows for the binding of larger peptide molecules. In the present study, we used a unique chemoselective photoaffinity labeling strategy, the methionine proximity assay, to directly identify at physiological conditions a total of 38 discrete ligand/receptor contact residues that form the extracellular peptide-binding site of an activated GPCR, the angiotensin II type 1 receptor. This experimental data set was used in homology modeling to guide the positioning of the angiotensin II (AngII) peptide within several GPCR crystal structure templates. We found that the CXC chemokine receptor type 4 accommodated the results better than the other templates evaluated; ligand/receptor contact residues were spatially grouped into defined interaction clusters with AngII. In the resulting receptor structure, a β-hairpin fold in extracellular loop 2 in conjunction with two extracellular disulfide bridges appeared to open and shape the entrance of the ligand-binding site. The bound AngII adopted a somewhat vertical binding mode, allowing concomitant contacts across the extracellular surface and deep within the transmembrane domain core of the receptor. We propose that such a dualistic nature of GPCR interaction could be well suited for diffusible linear peptide ligands and a common feature of other peptidergic class A GPCRs.

Structure and reorientational dynamics of angiotensin I and II: a microscopic physical insight

We present a study of structural analysis and reorientational dynamics of Angiotensin I (AngI) and Angiotensin II (AngII) in aqueous solution. AngI is a decapeptide that acts as a precursor to the octapeptide AngII in the Renin-Angiotensin-Aldosterone system for blood pressure regulation. Experimental structural characterization of these peptides, carried out with circular dichroism and infrared spectroscopy, showed that the angiotensins are mostly disordered but exhibit a measurable population of ordered structures at room temperature. Interestingly, these change from the unordered polyproline-like conformation for AngI to a more compact and ordered conformation for AngII as the length of the peptide is decreased. Anisotropy decay measurements with picosecond time resolution indicate slower overall tumbling and a greater amplitude of internal motion in AngI compared to AngII, consistent with more compact and less flexible structure of the active form of the peptide. To model the microscopic behavior of the peptides, 2-μs molecular dynamics simulation trajectories were generated for AngI and AngII, at 300 K using the OPLS-AA potential and SPC water. The structures sampled in the simulations mostly agree with the experimental results, showing the prevalence of disordered structures, turns, and polyproline helices. Additionally, the computational results predict fewer sampled conformations, tighter side-chain packing and marked increase of Phe8 solvent accessibility upon AngI truncation to AngII. Our combined approach of experiment and extensive computer simulation thus yields new information on the conformational dynamics of the angiotensins, helping provide insight into the structural basis for the potency of AngI relative to AngII.

Differential signaling defects associated with the M201V polymorphism in the cysteinyl leukotriene type 2 receptor

The cysteinyl-leukotrienes (cysLTs) LTC(4), LTD(4), and LTE(4), are involved in a variety of inflammatory diseases, including asthma, and act on at least two distinct receptors, CysLT(1) and CysLT(2). Specific antagonists of CysLT(1) are currently used to control bronchoconstriction and inflammation in asthmatic patients. The potential role of CysLT(2) in asthma remains poorly understood. A polymorphism in the CysLT(2) gene, resulting in a single amino acid substitution (M201V), was found to be associated with asthma in three separate population studies. Here, we investigated whether the M201V mutation affected the affinity of CysLT(2) for its natural ligands and its signaling efficiency. Human embryonic kidney 293 cells were stably transfected with either wild-type (wt) or mutant (M201V) CysLT(2). Affinity of the M201V receptor for LTC(4) was reduced by 50%, whereas affinity for LTD(4) was essentially lost. LTC(4)-induced production of inositol phosphates (IPs) in M201V-expressing cells was significantly decreased at suboptimal concentrations of the ligand, but no difference was observed at high concentrations. In contrast, LTD(4)-induced IP production was 10- to 100-fold less in M201V- than in wt-expressing cells. Similar results were also observed with the transactivation of the interleukin-8 promoter induced by LTC(4) or LTD(4). Moreover, in contrast to wt-expressing cells, phosphorylation of nuclear factor κB p65 was absent in LTD(4)-stimulated M201V-expressing cells. Likewise, phosphorylation of c-Jun N-terminal kinase was not induced in LTD(4)-stimulated M201V cells, whereas activation of extracellular response kinase and p38 was maintained, at least at higher LTD(4) concentrations. Our results indicate that the M201V polymorphism drastically affects CysLT(2) responses to LTD(4) and less to LTC(4).

The amino-terminus of angiotensin II contacts several ectodomains of the angiotensin II receptor AT1

G protein-coupled receptors (GPCRs) are the largest family of cell surface receptors and major targets for drug development. Herein, we sought to identify the regions of the human angiotensin II (AngII) type 1 (hAT(1)) receptor binding cleft that interact with all positions of the AngII using photoaffinity labeling. We conducted a complete iterative walk-through of the AngII sequence with either p-benzoyl-L-phenylalanine (Bpa) or p-[3-(trifluoromethyl)-3H-diazirin-3-yl]-L-phenylalanine (Tdf) to yield two series of eight photoreactive analogues. Pharmacological properties assessment of these sixteen analogues showed that the CAM receptor has a structure-activity relationship (SAR) more amenable to the amino acid substitutions at positions 1, 2, 3, and 5 of AngII than the WT receptor. Photoaffinity labeling of the CAM receptor with the selected analogues, which exhibit different but complementary photochemical properties, suggested that the AngII amino-terminus resides in a hydrophilic environment and interacts simultaneously with different regions of the hAT(1) receptor, including several ectodomains.

Ligand-specific conformation of extracellular loop-2 in the angiotensin II type 1 receptor

The orientation of the second extracellular loop (ECL2) is divergent in G-protein coupled receptor (GPCR) structures determined. This discovery provoked the question, is the ECL2 conformation differentially regulated in the GPCRs that respond to diffusible ligands? We have determined the conformation of the ECL2 of the angiotensin II type 1 receptor by reporter-cysteine accessibility mapping in different receptor states (i.e. empty, agonist-bound and antagonist-bound). We introduced cysteines at each position of ECL2 of an N-terminal epitope-tagged receptor surrogate lacking all non-essential cysteines and then measured reaction of these with a cysteine-reactive biotin probe. The ability of biotinylated mutant receptors to react with a steptavidin-HRP-conjugated antibody was used as the basis for examining differences in accessibility. Two segments of ECL2 were accessible in the empty receptor, indicating an open conformation of ECL2. These segments were inaccessible in the ligand-bound states of the receptor. Using the accessibility constraint, we performed molecular dynamics simulation to predict ECL2 conformation in different states of the receptor. Analysis suggested that a lid conformation similar to that of ECL2 in rhodopsin was induced upon binding both agonist and antagonist, but exposing different accessible segments delimited by the highly conserved disulfide bond. Our study reveals the ability of ECL2 to interact with diffusing ligands and to adopt a ligand-specific lid conformation, thus, slowing down dissociation of ligands when bound. Distinct conformations induced by the bound agonist and the antagonist around the conserved disulfide bond suggest an important role for this disulfide bond in producing different functional states of the receptor.

The fifth transmembrane domain of angiotensin II Type 1 receptor participates in the formation of the ligand-binding pocket and undergoes a counterclockwise rotation upon receptor activation

The octapeptide hormone angiotensin II exerts a wide variety of cardiovascular effects through the activation of the angiotensin II Type 1 (AT(1)) receptor, which belongs to the G protein-coupled receptor superfamily. Like other G protein- coupled receptors, the AT(1) receptor possesses seven transmembrane domains that provide structural support for the formation of the ligand-binding pocket. The role of the fifth transmembrane domain (TMD5) was investigated using the substituted cysteine accessibility method. All of the residues within Thr-190 to Leu-217 region were mutated one at a time to cysteine, and after expression in COS-7 cells, the mutant receptors were treated with the sulfhydryl-specific alkylating agent methanethiosulfonate-ethylammonium (MTSEA). MTSEA reacts selectively with water-accessible, free sulfhydryl groups of endogenous or introduced point mutation cysteines. If a cysteine is found in the binding pocket, the covalent modification will affect the binding kinetics of the ligand. MTSEA substantially decreased the binding affinity of L197C-AT(1), N200C-AT(1), I201C-AT(1), G203C-AT(1), and F204C-AT(1) mutant receptors, which suggests that these residues orient themselves within the water-accessible binding pocket of the AT(1) receptor. Interestingly, this pattern of acquired MTSEA sensitivity was altered for TMD5 reporter cysteines engineered in a constitutively active N111G-AT(1) receptor background. Indeed, mutant I201C-N111G-AT(1) became more sensitive to MTSEA, whereas mutant G203C-N111G-AT(1) lost some sensitivity. Our results suggest that constitutive activation of AT(1) receptor causes an apparent counterclockwise rotation of TMD5 as viewed from the extracellular side.

Activation induces structural changes in the liganded angiotensin II type 1 receptor

The octapeptide hormone angiotensin II (AngII) binds to and activates the human angiotensin II type 1 receptor (hAT(1)) of the G protein-coupled receptor class A family. Several activation mechanisms have been proposed for this family, but they have not yet been experimentally validated. We previously used the methionine proximity assay to show that 11 residues in transmembrane domain (TMD) III, VI, and VII of the hAT(1) receptor reside in close proximity to the C-terminal residue of AngII. With the exception of a single change in TMD VI, the same contacts are present on N111G-hAT(1), a constitutively active mutant; this N111G-hAT(1) is a model for the active form of the receptor. In this study, two series of 53 individual methionine mutations were constructed in TMD I, II, IV, and V on both receptor forms. The mutants were photolabeled with a neutral antagonist, (125)I-[Sar(1),p-benzoyl-L-Phe(8)]AngII, and the resulting complexes were digested with cyanogen bromide. Although no new contacts were found for the hAT(1) mutants, two were found in the constitutively active mutants, Phe-77 in TMD II and Asn-200 in TMD V. To our knowledge, this is the first time that a direct ligand contact with TMD II and TMD V has been reported. These contact point differences were used to identify the structural changes between the WT-hAT(1) and N111G-hAT(1) complexes through homology-based modeling and restrained molecular dynamics. The model generated revealed an important structural rearrangement of several TMDs from the basal to the activated form in the WT-hAT(1) receptor.

The second transmembrane domain of the human type 1 angiotensin II receptor participates in the formation of the ligand binding pocket and undergoes integral pivoting movement during the process of receptor activation

The octapeptide hormone angiotensin II (AngII) exerts a wide variety of cardiovascular effects through the activation of the angiotensin II type-1 (AT(1)) receptor, which belongs to the G protein-coupled receptor superfamily. Like other G protein-coupled receptors, the AT(1) receptor possesses seven transmembrane domains that provide structural support for the formation of the ligand-binding pocket. In order to identify those residues in the second transmembrane domain (TMD2) that contribute to the formation of the binding pocket of the AT(1) receptor, we used the substituted cysteine accessibility method. All of the residues within the Leu-70 to Trp-94 region were mutated one at a time to a cysteine, and, after expression in COS-7 cells, the mutant receptors were treated with the sulfhydryl-specific alkylating agent methanethiosulfonate-ethylammonium (MTSEA). MTSEA reacts selectively with water-accessible, free sulfhydryl groups of endogenous or introduced point mutation cysteines. If a cysteine is found in the binding pocket, the covalent modification will affect the binding kinetics of the ligand. MTSEA substantially decreased the binding affinity of D74C-AT(1), L81C-AT(1), A85C-AT(1), T88C-AT(1), and A89C-AT(1) mutant receptors, which suggests that these residues orient themselves within the water-accessible binding pocket of the AT(1) receptor. Interestingly, this pattern of acquired MTSEA sensitivity was altered for TMD2 reporter cysteines engineered in a constitutively active N111G-AT(1) receptor background. Indeed, mutant D74C-N111G-AT(1) became insensitive to MTSEA, whereas mutant L81C-N111G-AT(1) lost some sensitivity and mutant V86C-N111G-AT(1) became sensitive to MTSEA. Our results suggest that constitutive activation of the AT(1) receptor causes TMD2 to pivot, bringing the top of TMD2 closer to the binding pocket and pushing the bottom of TMD2 away from the binding pocket.

Synthesis of an Agonistic, Difluoro-Azido Photolabel of Angiotensin II and Labeling of the AT1Receptor: Transmembrane Domains 3, 6, and 7 Form the Ligand-Binding Pocket

p-Azido-phenylalanine has been frequently used for photoaffinity labeling of target proteins such as the angiotensin receptors. However, chemical studies showed that simple aryl nitrenes first react intramolecularly, forming a semistable cyclic keteneimine and then reacting with nucleophile residues in the target structure like those of lysine and arginine. We synthesized 3,5-difluoro-4-azidophenylalanine where the formation of the keteneimine is prevented and where photoincorporation should be due to nonselective nitrene insertion only. This new amino acid was introduced in position 8 of angiotensin II and compared with the corresponding azidophenylalanine peptide using human AT1 receptor as target. The new photolabel maintained full agonist activity and a similar yield of photolabeling but without the previously observed gradual hydrolysis. Several selective proteolyses of the labeled receptor indicate that the new photolabel forms three simultaneous contact regions on the hAT1 receptor, suggestive of a nonselective behavior of the photolabel. A major contact was established in the sixth transmembrane domain but also in the third and seventh domain. Our results are in excellent agreement with those recently obtained from methionine proximity assay studies.

In adrenal glomerulosa cells, angiotensin II inhibits proliferation by interfering with fibronectin-integrin signaling

Angiotensin II (Ang II), through the Ang II type 1 receptor subtype, inhibits basal proliferation of adrenal glomerulosa cells by inducing the disruption of actin stress fiber organization. This effect is observed in cells cultured on plastic or on fibronectin. The aim of the present study was to investigate how Ang II may interfere with extracellular matrix/integrin signaling. In cells treated for 3 d with echistatin (EC) (a snake-venom RGD-containing protein that abolishes fibronectin binding to alpha(5)beta(1) or alpha(v)beta(3) integrins), basal proliferation decreased by 38%, whereas Ang II was unable to abolish basal proliferation. In cells grown on fibronectin, Ang II decreased binding of paxillin to focal adhesions and, similarly to EC, induced a rapid dephosphorylation of paxillin (1 min), followed by an increase after 15 min. Fibronectin enhanced RhoA/B and Rac activation induced by Ang II, an effect abolished by EC. Under basal conditions, paxillin was more readily associated with RhoA/B than with Rac. Stimulation with Ang II induced a transient decrease in RhoA/B-associated paxillin (after 5 min), with a return to basal levels after 10 min, while increasing Rac-associated paxillin. Finally, results reveal that glomerulosa cells are able to synthesize and secrete fibronectin, a process by which cells can stimulate their own proliferative activity when cultured on plastic. Together, these results suggest that Ang II acts at the level of integrin-paxillin complexes to disrupt the well- developed microfilament network, a condition necessary for the inhibition of cell proliferation and initiation of steroidogenesis.

AT1 Receptor Ligands: Virtual-Screening-Based Design with TOPP Descriptors, Synthesis, and Biological Evaluation of Pyrrolidine Derivatives

As a continuing effort to establish the structure-activity relationships (SARs) within the series of the angiotensin II antagonists (sartans), a pharmacophoric model was built by using novel TOPP 3D descriptors. Statistical values were satisfactory (PC4: r(2)=0.96, q(2) ((5) (random) (groups))=0.84; SDEP=0.26) and encouraged the synthesis and consequent biological evaluation of a series of new pyrrolidine derivatives. SAR together with a combined 3D quantitative SAR and high-throughput virtual screening showed that the newly synthesized 1-acyl-N-(biphenyl-4-ylmethyl)pyrrolidine-2-carboxamides may represent an interesting starting point for the design of new antihypertensive agents. In particular, biological tests performed on CHO-hAT(1) cells stably expressing the human AT(1) receptor showed that the length of the acyl chain is crucial for the receptor interaction and that the valeric chain is the optimal one.

A proteomic study of sodium/d-glucose cotransporter 1 (SGLT1): Topology of loop 13 and coverage of other functionally important domains

In order to obtain further information about the structure and function of human sodium/D-glucose cotransporter 1 (hSGLT1), the recombinant protein was subjected, either after reconstitution into liposomes or in its free form, to proteolysis followed by nanoscale microcapillary liquid chromatography electrospray ionization tandem mass spectrometry (LC-MS/MS). The peptides released from SGLT1 proteoliposomes by trypsin bead digestion represented the early N-terminal, loop 7, and loop 9, supporting topology models that place these domains on the extracellular side of the protein. Trypsin bead digestion generated, however, also a number of peptides derived from loop 13 whose topology with regard to the membrane is hitherto a point of debate. Sequence coverage was provided from amino acids 559 to 644, suggesting that loop 13 is almost completely accessible at the extravesicular face of the proteoliposomes. These results support the notion that major parts of loop 13, essential for the interaction with transport inhibitors in vivo, are located extracellularly in intact cells. In-gel trypsin, chymotrypsin, and in particular trypsin/chymotrypsin digestion of recombinant SGLT1 in combination with LC-MS/MS provide extensive sequence coverage of the protein, including domains involved in sugar and inhibitor binding and potential phosphorylation sites. These studies demonstrate that proteomic analysis combined with mass spectrometry is a useful tool to characterize regions of SGLT1 that are important for its function and regulation.

Photoaffinity labeling and its application in structural biology

This review contains a brief consideration of some theoretical aspects of photoaffinity (photoreactive) labeling (PAL), and the most widely used photoreactive groups, such as arylazide, benzophenone, and 3-(trifluoromethyl)-3-phenyldiazirine, are characterized in comparison. Experimental methodology is described, including modern approaches of mass spectrometry for analysis of cross-linking products between the photoreactive probes and biomolecules. Examples of PAL application in diverse fields of structural biology during the last five-ten years are presented. Potential drug targets, transport processes, stereochemistry of interaction of G-protein-coupled receptors with ligands, as well as structural changes in nicotinic acetylcholine receptor are considered. Applications of photoaffinity ganglioside and phospholipid probes for studying biological membranes and of nucleotide probes in investigations of replicative and transcriptional complexes, as well as photoaffinity glycoconjugates for detecting carbohydrate-binding proteins are covered. In combination with modern techniques of instrumental analysis and computer-aided modeling, PAL remains the most important approach in studies on the organization of biological systems.

Photolabelling the urotensin II receptor reveals distinct agonist- and partial-agonist-binding sites

The mechanism by which GPCRs (G-protein-coupled receptors) undergo activation is believed to involve conformational changes following agonist binding. We have used photoaffinity labelling to identify domains within GPCRs that make contact with various photoreactive ligands in order to better understand the activation mechanism. Here, a series of four agonist {[Bpa1]U-II (Bpa is p-benzoyl-L-phenylalanine), [Bpa2]U-II, [Bpa3]U-II and [Bpa4]U-II} and three partial agonist {[Bpa1Pen5D-Trp7Orn8]U-II (Pen is penicillamine), [Bpa2Pen5D-Trp7Orn8]U-II and [Pen5Bpa6D-Trp7Orn8]U-II} photoreactive urotensin II (U-II) analogues were used to identify ligand-binding sites on the UT receptor (U-II receptor). All peptides bound the UT receptor expressed in COS-7 cells with high affinity (Kd of 0.3-17.7 nM). Proteolytic mapping and mutational analysis led to the identification of Met288 of the third extracellular loop of the UT receptor as a binding site for all four agonist peptides. Both partial agonists containing the photoreactive group in positions 1 and 2 also cross-linked to Met288. We found that photolabelling with the partial agonist containing the photoreactive group in position 6 led to the detection of transmembrane domain 5 as a binding site for that ligand. Interestingly, this differs from Met184/Met185 of the fourth transmembrane domain that had been identified previously as a contact site for the full agonist [Bpa6]U-II. These results enable us to better map the binding pocket of the UT receptor. Moreover, the data also suggest that, although structurally related agonists or partial agonists may dock in the same general binding pocket, conformational changes induced by various states of activation may result in slight differences in spatial proximity within the cyclic portion of U-II analogues.

Temperature-dependent variations of ligand-receptor contact points in hAT1

Photoaffinity labelling is regularly used to investigate proteins, including peptidergic G protein-coupled receptors (GPCR). To this purpose benzophenone photolabels have been widely used to identify many contact residues in ligand-binding pockets. The three-dimensional binding environment of the human angiotensin II type 1 receptor hAT(1) has been determined using an iterative methionine mutagenesis strategy based on the photochemical properties and preferential incorporation of benzophenone onto methionine. This has led to the construction of a ligand-bound receptor structure. The present study investigated the effect of temperature on the accessibility of some of these contact points. The hAT(1) receptor and two representative Met mutants (H256M-hAT(1) and F293M-hAT(1)) from the iterative mutagenesis study were photolabelled with the benzophenone-ligand (125)I-[Sar(1), Bpa(8)]AngII at temperatures ranging from - 15 degrees C to 37 degrees C. Labelled receptors were partially purified and digested with cyanogen bromide to identify the contact points or segments. There were no changes in receptor contacts or labelling in the 7th transmembrane domains (TMD) of hAT(1) and F293M-hAT(1) across the temperature range. However, a temperature-dependent change in the ligand-receptor contact of H256M-hAT(1) was observed. At - 15 degrees C, H256M labelling was identical to that of hAT(1), indicating that the interaction was specific to the 7th TMD. Significant labelling changes were observed at higher temperatures and at 37 degrees C labelling occurred almost exclusively at mutated residue H256M-hAT(1) in the 6th TMD. Simultaneous competitive labelling of different areas of this target protein indicated that the ligand-receptor structure became increasingly fluctual at physiological temperatures, while a more compact, low mobility, and low energy conformation prevailed at low temperatures.

Interactions between Conserved Residues in Transmembrane Helices 2 and 7 during Angiotensin AT1Receptor Activation

Site-directed mutagenesis studies and independent molecular modeling studies were combined to investigate the network of inter-residue interactions within the transmembrane region of the angiotensin AT(1a) receptor. Site-directed mutagenesis was focused on residues Tyr292, Asn294, Asn295, and Asn298 in transmembrane helix 7, and the conserved Asp74 in helix 2 and other polar residues. Functional interactions between pairs of residues were evaluated by determining the effects of single and double-reciprocal mutations on agonist-induced AT(1a) receptor activation. Replacement of Tyr292 by aspartate in helix 7 abolished radioligand binding to both Y292D and D74Y/Y292D mutant receptors. Reciprocal mutations of Asp74/Asn294, Ser115/Asn294, Ser252/Asn294, and Asn298/Sen115 caused additive impairment of function, suggesting that these pairs of residues make independent contributions to AT(1a) receptor activation. In contrast, mutations of the Asp74/Tyr298 pair revealed that the D74N/N298D reciprocal mutation substantially increased the impaired inositol phosphate responses of the D74N and N298D receptors. Extensive molecular modeling yielded 3D models of the TM region of the AT(1) receptor and the mutants as well as of their complexes with angiotensin II, which were used to rationalize the possible reasons of impairing of function of some mutants. These data indicate that Asp74 and Asn298 are not optimally positioned for direct strong interaction in the resting conformation of the AT(1a) receptor. Balance of interactions between residues in helix 2 (as D74) and helix 7 (as N294, N295 and N298) in the AT(1) receptors, however, has a crucial role both in determining their functional activity and levels of their expression.

Stereospecific Synthesis of a Carbene-Generating Angiotensin II Analogue for Comparative Photoaffinity Labeling: Improved Incorporation and Absence of Methionine Selectivity

A stereospecific convergent synthesis of N-[(9-fluorenyl)methoxycarbonyl]-p-[3-(trifluoromethyl)-3H-diazirin-3-yl]-l-phenylalanine (Fmoc-12, Fmoc-Tdf) and its incorporation into the C-terminal position of the angiotensin II (AngII) peptide to form (125)I[Sar(1),Tdf(8)]AngII ((125)I-13) is presented. This amino acid photoprobe is a highly reactive carbene-generating diazirine phenylalanine derivative that can be used for photoaffinity labeling. Using model receptors, we compared the reactivity and the Met selectivity of 12 to that of the widely used and reputedly Met-selective p-benzoyl-l-phenylalanine (Bpa) photoprobe. Wild-type and mutant AngII type 2 receptors, a G protein-coupled receptors, were photolabeled with (125)I-13 as well as with (125)I[Sar(1),Bpa(8)]AngII ((125)I-14), and the respective incorporation yields were assessed. The carbene-generating 12 was more reactive toward inert residues and was not Met-selective compared to the biradical ketone-generating Bpa, allowing for more precise determination of ligand contact points in peptidergic receptors.

Methionine acts as a “magnet” in photoaffinity crosslinking experiments

Photoaffinity crosslinking has been utilized to probe the nature of the ligand-receptor interface for a number of G protein-coupled receptor systems. Often the photoreactive benzophenone moiety incorporated in the ligand is found to react with a methionine in the receptor. We introduced methionines one-at-a-time into the region 163-176 of the parathyroid hormone receptor, and find that crosslinking occurs to the side-chain of methionine over a range of 11 amino acids. We call this the "Magnet Effect" of methionine. Hence, crosslinking contact points can be significantly shifted by the presence of methionine in a receptor domain.

Model of the whole rat AT1 receptor and the ligand-binding site

We present a three-dimensional model of the rat type 1 receptor (AT1) for the hormone angiotensin II (Ang II). Ang II and the AT1 receptor play a critical role in the cell-signaling process responsible for the actions of renin-angiotensin system in the regulation of blood pressure, water-electrolyte homeostasis and cell growth. Development of improved therapeutics would be significantly enhanced with the availability of a 3D-structure model for the AT1 receptor and of the binding site for agonists and antagonists. This model was constructed using a combination of computation and homology-modeling techniques starting with the experimentally determined three-dimensional structure of bovine rhodopsin (PDB#1F88) as a template. All 359 residues and two disulfide bonds in the rat AT1 receptor have been accounted for in this model. Ramachandran-map analysis and a 1 nanosecond molecular dynamics simulation of the solvated receptor with and without the bound ligand, Ang II, lend credence to the validity of the model. Docking calculations were performed with the agonist, Ang II and the antihypertensive antagonist, losartan. [Figure: see text].

Angiotensin II pseudopeptides containing 1,3,5-trisubstituted benzene scaffolds with high AT2 receptor affinity

Two 1,3,5-trisubstituted aromatic scaffolds intended to serve as gamma-turn mimetics have been synthesized and incorporated in five pseudopeptide analogues of angiotensin II (Asp-Arg-Val-Tyr-Ile-His-Pro-Phe), replacing Val-Tyr-Ile, Val-Tyr, or Tyr-Ile. All the tested compounds exhibited nanomolar affinity for the AT2 receptor with the best compound (3) having a K(i) of 1.85 nM. Four pseudopeptides were AT2 selective, while one (5) also exhibited good affinity for the AT1 receptor (K(i) = 30.3 nM). This pseudopeptide exerted full agonistic activity in an AT2 receptor induced neurite outgrowth assay but displayed no agonistic effect in an AT1 receptor functional assay. Molecular modeling, using the program DISCOtech, showed that the high-affinity ligands could interact similarly with the AT2 receptor as other ligands with high affinity for this receptor. A tentative agonist model is proposed for AT2 receptor activation by angiotensin II analogues. We conclude that the 1,3,5-trisubstituted benzene rings can be conveniently prepared and are suitable as gamma-turn mimics.

Molecular mechanisms of constitutive activity: mutations at position 111 of the angiotensin AT1 receptor

A possible molecular mechanism for the constitutive activity of mutants of the angiotensin type 1 receptor (AT1) at position 111 was suggested by molecular modeling. This involves a cascade of conformational changes in spatial positions of side chains along transmembrane helix (TM3) from L112 to Y113 to F117, which in turn, results in conformational changes in TM4 (residues I152 and M155) leading to the movement of TM4 as a whole. The mechanism is consistent with the available data of site-directed mutagenesis, as well as with correct predictions of constitutive activity of mutants L112F and L112C. It was also predicted that the double mutant N111G/L112A might possess basal constitutive activity comparable with that of the N111G mutant, whereas the double mutants N111G/Y113A, N111G/F117A, and N111G/I152A would have lower levels of basal activity. Experimental studies of the above double mutants showed significant constitutive activity of N111G/L112A and N111G/F117A. The basal activity of N111G/I152A was higher than expected, and that of N111G/Y113A was not determined due to poor expression of the mutant. The proposed mechanism of constitutive activity of the AT(1) receptor reveals a novel nonsimplistic view on the general problem of constitutive activity, and clearly demonstrates the inherent complexity of the process of G protein-coupled receptor (GPCR) activation.

Importance of N-glycosylation positioning for cell-surface expression, targeting, affinity and quality control of the human AT1 receptor

GPCRs (G-protein-coupled receptors) are preferentially N-glycosylated on ECL2 (extracellular loop 2). We previously showed that N-glycosylation of ECL2 was crucial for cell-surface expression of the hAT1 receptor (human angiotensin II receptor subtype 1). Here, we ask whether positioning of the N-glycosylation sites within the various ECLs of the receptor is a vital determinant in the functional expression of hAT(1) receptor at the cell surface. Artificial N-glycosylation sequons (Asn-Xaa-Ser/Thr) were engineered into ECL1, ECL2 and ECL3. N-glycosylation of ECL1 caused a very significant decrease in affinity and cell surface expression of the resulting receptor. Shifting the position of the ECL2 glycosylation site by two residues led to the synthesis of a misfolded receptor which, nevertheless, was trafficked to the cell surface. The misfolded nature of this receptor is supported by an increased interaction with the chaperone HSP70 (heat-shock protein 70). Introduction of N-glycosylation motifs into ECL3 yielded mutant receptors with normal affinity, but low levels of cell surface expression caused by proteasomal degradation. This behaviour differed from that observed for the aglycosylated receptor, which accumulated in the endoplasmic reticulum. These results show how positioning of the N-glycosylation sites altered many properties of the AT1 receptor, such as targeting, folding, affinity, cell surface expression and quality control.

New selective AT2 receptor ligands encompassing a gamma-turn mimetic replacing the amino acid residues 4-5 of angiotensin II act as agonists

New benzodiazepine-based gamma-turn mimetics with one or two amino acid side chains were synthesized. The gamma-turn mimetics were incorporated into angiotensin II (Ang II) replacing the Val(3)-Tyr(4)-Ile(5) or Tyr(4)-Ile(5) peptide segments. All of the resulting pseudopeptides displayed high AT(2)/AT(1) receptor selectivity and exhibited AT(2) receptor affinity in the low nanomolar range. Molecular modeling was used to investigate whether the compounds binding to the AT(2) receptor could position important structural elements in common areas. A previously described benzodiazepine-based gamma-turn mimetic with high affinity for the AT(2) receptor was also included in the modeling. It was found that the molecules, although being structurally quite different, could adopt the same binding mode/interaction pattern in agreement with the model hypothesis. The pseudopeptides selected for agonist studies were shown to act as AT(2) receptor agonists being able to induce outgrowth of neurite cells, stimulate p42/p44(mapk), and suppress proliferation of PC12 cells.

Determining the Environment of the Ligand Binding Pocket of the Human Angiotensin II Type I (hAT1) Receptor Using the Methionine Proximity Assay

The peptide hormone angiotensin II (AngII) binds to the AT0 (angiotensin type 1) receptor within the transmembrane domains in an extended conformation, and its C-terminal residue interacts with transmembrane domain VII at Phe-293/Asn-294. The molecular environment of this binding pocket remains to be elucidated. The preferential binding of benzophenone photolabels to methionine residues in the target structure has enabled us to design an experimental approach called the methionine proximity assay, which is based on systematic mutagenesis and photolabeling to determine the molecular environment of this binding pocket. A series of 44 transmembrane domain III, VI, and VII X --> Met mutants photolabeled either with 125I-[Sar1,p'-benzoyl-L-Phe8]AngII or with 125I-[Sar1,p''-methoxy-p'-benzoyl-L-Phe8]AngII were purified and digested with cyanogen bromide. Several mutants produced digestion patterns different from that observed with wild type human AT1, indicating that they had a new receptor contact with position 8 of AngII. The following residues form this binding pocket: L112M and Y113M in transmembrane domain (TMD) III; F249M, W253M, H256M, and T260M in TMD VI; and F293M, N294M, N295M, C296M, and L297M in TMD VII. Homology modeling and incorporation of these contacts allowed us to develop an evidence-based molecular model of interactions with human AT1 that is very similar to the rhodopsin-retinal interaction.

AT2-selective angiotensin II analogues containing tyrosine-functionalized 5,5-bicyclic thiazabicycloalkane dipeptide mimetics

This paper reports the synthesis of two angiotensin II analogues with tyrosine-functionalized 5,5-bicyclic thiazabicycloalkane dipeptide mimetics replacing the Tyr(4)-Ile(5) residues. The preparation of these analogues relies on the synthesis and incorporation of an alpha,alpha-disubstituted chimeric amino acid derivative and on-resin bicyclization to a cysteine residue. The synthesized analogues both displayed high angiotensin AT(2)/AT(1) receptor binding preferences and had AT(2) receptor affinities in the same low nanomolar range as angiotensin II itself. Conformational analysis, using experimental constraints derived from NMR studies, indicated that the Tyr(4) and His(6) residues in one of the angiotensin II analogues were in close proximity to each other.

Analysis of the third transmembrane domain of the human type 1 angiotensin II receptor by cysteine scanning mutagenesis

Activation of G protein-coupled receptors by agonists involves significant movement of transmembrane domains (TMD) following agonist binding. The underlying structural mechanism by which receptor activation takes place is largely unknown but can be inferred by detecting variability within the environment of the ligand-binding pocket, which is a water-accessible crevice surrounded by the seven TMD helices. Using the substituted-cysteine accessibility method, we identified the residues within the third TMD of the wild-type angiotensin II (AT1) receptor that contribute to the formation of the binding site pocket. Each residue within the Ile103-Tyr127 region was mutated one at a time to a cysteine. Treating the A104C, N111C, and L112C mutant receptors with the charged sulfhydryl-specific alkylating agent methanethiosulfonate-ethylammonium (MTSEA) strongly inhibited ligand binding, which suggests that these residues orient themselves within the water-accessible binding pocket of the AT1 receptor. Interestingly, this pattern of acquired MTSEA sensitivity was altered for TMD3 reporter cysteines engineered in a constitutively active AT1 receptor. Indeed, two additional mutants (S109C and V116C) were found to be sensitive to MTSEA treatment. Our results suggest that constitutive activation of the AT1 receptor causes a minor counterclockwise rotation of TMD3, thereby exposing residues, which are not present in the inactive state, to the binding pocket. This pattern of accessibility of residues in the TMD3 of the AT1 receptor parallels that of homologous residues in rhodopsin. This study identified key elements of TMD3 that contribute to the activation of class A G protein-coupled receptors through structural rearrangements.

Angiotensin II inhibitory peptide found in the receptor sequence using peptide array

Peptide array consisting of hundreds of peptides spatially addressed and synthesized on a cellulose membrane support was used to screen ligand-inhibitory peptides. As a model, angiotensin II (Ang II), a significant peptide related to the treatment of cardiovascular diseases, was chosen as the target ligand. Peptide arrays covering the Ang II receptor type 1 sequence were prepared, and peptide domains with high affinity to the Ang II fluorescein conjugate were investigated. The peptide (VVIVIY) within the first transmembrane region exhibited the highest affinity to Ang II. The synthesized soluble VVIVIY peptide had an 84% inhibitory effect on Ang II-induced aorta contraction. These results indicate that our screening strategy utilizing peptide array is an effective approach for the peptide drug development.

The constitutively active N111G-AT1 receptor for angiotensin II maintains a high affinity conformation despite being uncoupled from its cognate G protein Gq/11alpha

Asn111, localized in the third transmembrane domain of the AT1 receptor for angiotensin II, plays a critical role in stabilizing the inactive conformation of the receptor. We evaluated the functional and G protein-coupling properties of mutant AT1 receptors in which Asn111 was substituted with smaller (Ala or Gly) or larger residues (Gln or Trp). All four mutants were expressed at high levels in COS-7 cells and, except for N111W-AT1, recognized 125I-Ang II with high affinities comparable to that of the wild-type AT1 receptor. In phospholipase C assays, the four mutants encompassed the entire spectrum of functional states, ranging from constitutive activity (without agonist) for N111A-AT1 and N111G-AT1 to a significant loss of activity (upon maximal stimulation) for N111Q-AT1 and a major loss of activity for N111W-AT1. In Ca2+ mobilization studies, N111W-AT1 produced a weak Ca2+ transient and, unexpectedly, N111G-AT1 also produced a Ca2+ transient that was much weaker than that of the wild-type AT1. The agonist binding affinity of N111W-AT1 was not modified in the presence of GTPgamma S, suggesting that this receptor is not basally coupled to a G protein. GTPgamma S did not modify the high agonist-binding affinity of N111G-AT1 but abolished the coimmunoprecipitation of Gq/11alpha with this constitutively active mutant receptor. These results are a direct demonstration that the N111G-AT1 receptor maintains a high affinity conformation despite being uncoupled from the G protein Gq/11.

Interaction of angiotensin II with the C-terminal 300-320 fragment of the rat angiotensin II receptor AT1a monitored by NMR

Interaction between angiotensin II (Ang II) and the fragment peptide 300-320 (fCT300-320) of the rat angiotensin II receptor AT1a was demonstrated by relaxation measurements, NOE effects, chemical shift variations, and CD measurements. The correlation times modulating dipolar interactions for the bound and free forms of Ang II were estimated by the ratio of the nonselective and single-selective longitudinal relaxation rates. The intermolecular NOEs observed in NOESY spectra between HN protons of 9Lys(fCT) and 6His(ang), 10Phe(fCT) and 8Phe(ang), HN proton of 3Tyr(fCT) and Halpha of 4Tyr(ang), 5Phe(fCT)Hdelta and Halpha of 4Tyr(ang) indicated that Ang II aromatic residues are directly involved in the interaction, as also verified by relaxation data. Some fCT300-320 backbone features were inferred by the CSI method and CD experiments revealing that the presence of Ang II enhances the existential probability of helical conformations in the fCT fragment. Restrained molecular dynamics using the simulated annealing protocol was performed with intermolecular NOEs as constraints, imposing an alpha-helix backbone structure to fCT300-320 fragment. In the built model, one strongly preferred interaction was found that allows intermolecular stacking between aromatic rings and forces the peptide to wrap around the 6Leu side chain of the receptor fragment.

Constitutive activation of the angiotensin II type 1 receptor alters the spatial proximity of transmembrane 7 to the ligand-binding pocket

Activation of G protein-coupled receptors by agonists involves significant movement of transmembrane domains (TM) following binding of agonist. The underlying structural mechanism by which receptor activation takes place is largely unknown but can be inferred by detecting variability within the environment of the ligand-binding pocket, which constitutes a water-accessible crevice surrounded by the seven TM helices. Using the substituted cysteine accessibility method, we initially identified those residues within the seventh transmembrane domain (TM7) of wild type angiotensin II type 1 (AT1) receptor that contribute to forming the binding site pocket. We have substituted successively TM7 residues ranging from Ile276 to Tyr302 to cysteine. Treatment of A277C, V280C, T282C, A283C, I286C, A291C, and F301C mutant receptors with the charged sulfhydryl-specific alkylating agent MTSEA significantly inhibited ligand binding, which suggests that these residues orient themselves within the water-accessible binding pocket of the AT1 receptor. Interestingly, this pattern of acquired MTSEA sensitivity was greatly reduced for TM7 reporter cysteines engineered in a constitutively active mutant of the AT1 receptor. Our data suggest that upon activation, TM7 of the AT1 receptor goes through a pattern of helical movements that results in its distancing from the binding pocket per se. These studies support accumulating evidence whereby elements of TM7 of class A GPCRs promote activation of the receptor through structural rearrangements.

The structure of the Ce(III)-angiotensin II complex as obtained from NMR data and molecular dynamics calculations

Angiotensin II is shown by nuclear magnetic resonance (NMR) to form a complex in water at pH 4.0 with cerium(III), the ideal paramagnetic probe for Ca(2+). Paramagnetic shifts induced by the metal were used for the determination of dissociation constant and complex stoichiometry. ROESY cross-peaks and 3 J(HN-H)(alpha) coupling constants were converted into distance and angular constraints to determine the structure of the complex by molecular dynamics using the simulated annealing protocol. The complex is kinetically labile and involves the Asp-1 side chain and the Phe-8 terminal carboxylates as binding groups resembling a hairpin which has been suggested as a possible biologically active structure.

Comparison of the solution structures of angiotensin I & II. Implication for structure-function relationship

Conformational analysis of angiotensin I (AI) and II (AII) peptides has been performed through 2D 1H-NMR spectroscopy in dimethylsulfoxide and 2,2,2-trifluoroethanol/H2O. The solution structural models of AI and AII have been determined in dimethylsulfoxide using NOE distance and 3JHNHalpha coupling constants. Finally, the AI family of models resulting from restrained energy minimization (REM) refinement, exhibits pairwise rmsd values for the family ensemble 0.26 +/- 0.13 A, 1.05 +/- 0.23 A, for backbone and heavy atoms, respectively, and the distance penalty function is calculated at 0.075 +/- 0.006 A2. Comparable results have been afforded for AII ensemble (rmsd values 0.30 +/- 0.22 A, 1.38 +/- 0.48 A for backbone and heavy atoms, respectively; distance penalty function is 0.029 +/- 0.003 A2). The two peptides demonstrate similar N-terminal and different C-terminal conformation as a consequence of the presence/absence of the His9-Leu10 dipeptide, which plays an important role in the different biological function of the two peptides. Other conformational variations focused on the side-chain orientation of aromatic residues, which constitute a biologically relevant hydrophobic core and whose inter-residue contacts are strong in dimethylsulfoxide and are retained even in mixed organic-aqueous media. Detailed analysis of the peptide structural features attempts to elucidate the conformational role of the C-terminal dipeptide to the different binding affinity of AI and AII towards the AT1 receptor and sets the basis for understanding the factors that might govern free- or bound-depended AII structural differentiation.

Conformational features of a synthetic model of the first extracellular loop of the angiotensin II AT1A receptor

The angiotensin II AT1A receptor belongs to the G-protein coupled receptors (GPCRs). Like other membrane proteins, GPCRs are not easily amenable to direct structure determination by the currently available methods. The peptide encompassing the putative first extracellular loop of AT1A (residues Thr88-Leu100, el1) has been synthesized along with a cyclic model where the linear peptide has been covalently linked to a template designed to keep the distance between the peptide termini as expected in the receptor. The conformational features of the two molecules have been studied using circular dichroism and NMR techniques. The region W94PFG97 forms a type-II beta-turn and undergoes a Trp-Pro peptide bond cis-trans isomerization in both peptides confirming that these characteristics are intrinsic to el1. In addition, the presence of the spacer seems to modulate the flexibility of the peptide.

Photolabelling the rat urotensin II/GPR14 receptor identifies a ligand-binding site in the fourth transmembrane domain

A urotensin II (U-II) peptide analogue containing the photoreactive p -benzoyl-L-phenylalanine (Bz-Phe) in the sixth position was used to identify ligand-binding sites of the rat U-II receptor, also known as GPR14. [Bz-Phe(6)]U-II bound the receptor expressed in COS-7 cells with high affinity (IC(50) 0.7 nM) and was as potent as U-II in the agonist-induced production of inositol phosphate. Photolabelling of the U-II receptor with (125)I-[Bz-Phe(6)]U-II resulted in the specific formation of a glycosylated (125)I-[Bz-Phe(6)]U-II-U-II receptor complex of 60 kDa. Digestion of the 60 kDa complex with endoproteinase Glu-C generated a fragment of 17 kDa circumscribing the labelled fragment to residues 148-286. Digestion of the ligand-receptor complex with endoproteinase Arg-C produced a short peptide of 4 kDa corresponding to fragments 125-148, 167-192 or 210-233. CNBr treatment of the endoproteinase-Glu-C and -Arg-C fragments yielded 2 kDa fragments, defining the labelling site to methionine residues 184/185 of the fourth transmembrane domain. Photolabelling of two mutant receptors, M184L/M185L and M184A/M185A, led to a significant decrease in the overall yield of covalent labelling. Taken together, our results indicate that position 6 of U-II normally occupied by phenylalanine would interact with Met(184) and/or Met(185) of the fourth transmembrane domain of the U-II receptor. This information should be of significant value in the study of the interactions between U-II and its cognate receptor.

Non-peptide angiotensin II receptor antagonists: chemical feature based pharmacophore identification

Chemical feature based pharmacophore models were elaborated for angiotensin II receptor subtype 1 (AT(1)) antagonists using both a quantitative and a qualitative approach (Catalyst HypoGen and HipHop algorithms, respectively). The training sets for quantitative model generation consisted of 25 selective AT(1) antagonists exhibiting IC(50) values ranging from 1.3 nM to 150 microM. Additionally, a qualitative pharmacophore hypothesis was derived from multiconformational structure models of the two highly active AT(1) antagonists 4u (IC(50) = 0.2 nM) and 3k (IC(50) = 0.7 nM). In the case of the quantitative model, the best pharmacophore hypothesis consisted of a five-features model (Hypo1: seven points, one hydrophobic aromatic, one hydrophobic aliphatic, a hydrogen bond acceptor, a negative ionizable function, and an aromatic plane function). The best qualitative model consisted of seven features (Hypo2: 11 points, two aromatic rings, two hydrogen bond acceptors, a negative ionizable function, and two hydrophobic functions). The obtained pharmacophore models were validated on a wide set of test molecules. They were shown to be able to identify a range of highly potent AT(1) antagonists, among those a number of recently launched drugs and some candidates presently undergoing clinical tests and/or development phases. The results of our study provide confidence for the utility of the selected chemical feature based pharmacophore models to retrieve structurally diverse compounds with desired biological activity by virtual screening.

Identification of the extracellular loop 2 as the point of interaction between the N terminus of the chemokine MIP-1alpha and its CCR1 receptor

Macrophage inflammatory peptide-1alpha (MIP-1alpha)/CC-chemokine receptor ligand 3 is an 8-kDa peptide that induces chemotaxis of various lymphocytes to sites of inflammation through interaction with the G protein-coupled chemokine receptors CCR1 and CCR5. We recently described the preparation of a photoactivatable derivative of MIP-1alpha labeled with a benzophenone group at the extreme N-terminal end, which is a determinant for the agonist character of chemokines. Benzophenone-MIP-1alpha is a full agonist that specifically and covalently labels CCR1 and CCR5 receptors upon irradiation. In the present study, we use enzymatic and chemical cleavage methods on wild-type and mutated CCR1 receptors to show that the N terminus of the chemokine MIP-1alpha interacts in a specific manner with the second extracellular loop of the CCR1 receptor, within a segment comprising amino acids 178 to 194. This is the first report on the direct identification of a contact point between the N terminus of a chemokine and its membrane-bound receptor. The work shows that the part of chemokines that is endowed with agonist properties interacts with extracellular parts of the receptor rather than the transmembrane core of the protein.