Polymersome Encapsulated Hemoglobin: A Novel Type of Oxygen Carrier

Polymersomes for Therapeutic Protein and Peptide Delivery: Towards Better Loading Properties

Therapeutics based on proteins and peptides have profoundly transformed the landscape of treatment for diseases, from diabetes mellitus to cancers, yet the short half-life and low bioavailability of therapeutic proteins and peptides hinder their wide applications. To break through this bottleneck, biomolecules-loaded polymersomes with strong adjustability and versatility have attracted more and more attentions recently. Loading proteins or peptides into polymersomes is the first but extremely important step towards developing high-quality formulation products. However, increasing protein and peptide loading content is quite challenging due to the inherent nature of self-assembled vesicle formation mechanism and physiochemical characteristics of biomacromolecules. This review highlights the potential of polymersomes as the next-generation therapeutic proteins and peptides carrier and emphatically introduces novel approaches and recent progress to achieve satisfactory encapsulation capability of polymersomes for proteins and peptides. On the one hand, with the help of intermolecular interactions, such as electrostatic, lipid-protein, and hydrophobic interactions, the drug loading could be significantly improved. On the other hand, loading improvement could be attained through innovation of preparation methods, ranging from modified traditional film hydration techniques to the novel phase-guided assembly method.

Development of novel polymer haemoglobin based particles as an antioxidant, antibacterial and an oxygen carrier agents

This innovative work aims to develop highly biocompatible and degradable nanoparticles by encapsulating haemoglobin (Hb) within poly-ε-caprolactone for novel biomedical applications. We used a modified double emulsion solvent evaporation method to fabricate the particles. A Scanning electron microscope (SEM) characterized them for surface morphology. Fourier Transform Infrared Spectroscopy (FTIR) and Ultraviolet-visible spectroscopies (UV-visible) elucidated preserved chemical and biological structure of encapsulated haemoglobin. The airproof equilibrium apparatus obtained the oxygen-carrying capacity and P50 values. The DPPH assay assessed free radical scavenging potential. The antibacterial properties were observed using four different bacterial strains by disk diffusion method. The MTT assay investigates the cytotoxic effects on mouse fibroblast cultured cell lines (L-929). The MTT assay showed that nanoparticles have no toxicity over large concentrations. The well-preserved structure of Hb within particles, no toxicity, high oxygen affinity, P50 value, and IC50 values open the area of new research, which may be used as artificial oxygen carriers, antioxidant, and antibacterial agents, potential therapeutic agents as well as drug carrier particles to treat the cancerous cells. The novelty of this work is the antioxidant and antibacterial properties of developed nanoparticles are not been reported yet. Results showed that the prepared particles have strong antioxidant and antibacterial potential.

The artificial oxygen carrier erythrocruorin-characteristics and potential significance in medicine

The diminishing supply and increasing costs of donated blood have motivated research into novel hemoglobin-based oxygen carriers (HBOCs) that can serve as red blood cell (RBC) substitutes. HBOCs are versatile agents that can be used in the treatment of hemorrhagic shock. However, many of the RBC substitutes that are based on mammalian hemoglobins have presented key limitations such as instability and toxicity. In contrast, erythrocruorins (Ecs) are other types of HBOCs that may not suffer these disadvantages. Ecs are giant metalloproteins found in annelids, crustaceans, and some other invertebrates. Thus far, the Ecs of Lumbricus terrestris (LtEc) and Arenicola marina (AmEc) are the most thoroughly studied. Based on data from preclinical transfusion studies, it was found that these compounds not only efficiently transport oxygen and have anti-inflammatory properties, but also can be modified to further increase their effectiveness. This literature review focuses on the structure, properties, and application of Ecs, as well as their advantages over other HBOCs. Development of methods for both the stabilization and purification of erythrocruorin could confer to enhanced access to artificial blood resources.

Polymersome-based protein drug delivery - quo vadis?

Protein-based therapeutics are an attractive alternative to established therapeutic approaches and represent one of the fastest growing families of drugs. While many of these proteins can be delivered using established formulations, the intrinsic sensitivity of proteins to denaturation sometimes calls for a protective carrier to allow administration. Historically, lipid-based self-assembled structures, notably liposomes, have performed this function. After the discovery of polymersome-based targeted drug-delivery systems, which offer manifold advantages over lipid-based structures, the scientific community expected that such systems would take the therapeutic world by storm. However, no polymersome formulations have been commercialised. In this review article, we discuss key obstacles for the sluggish translation of polymersome-based protein nanocarriers into approved pharmaceuticals, which include limitations imparted by the use of non-degradable polymers, the intricacies of polymersome production methods, and the complexity of the in vivo journey of polymersomes across various biological barriers. Considering this complex subject from a polymer chemist's point of view, we highlight key areas that are worthy to explore in order to advance polymersomes to a level at which clinical trials become worthwhile and translation into pharmaceutical and nanomedical applications is realistic.

Recent Advancement of Polymersomes as Drug Delivery Carrier

BACKGROUND

Biomedical applications of polymersomes have been explored, including drug and gene delivery, insulin delivery, hemoglobin delivery, the delivery of anticancer agents, and various diagnostic purposes.

OBJECTIVES

Polymersomes, which are self-assembled amphiphilic block copolymers, have received a lot of attention in drug delivery approaches. This review represents the methods of preparation of polymersomes including thin-film rehydration, electroformation, double emulsion, gel-assisted rehydration, PAPYRUS method, and solvent injection methods including various therapeutic applications of polymersomes.

METHODS

Data we searched from PubMed, Google Scholar, and Science Direct through searching of keywords: Polymersomes, methods of preparation, amphiphilic block copolymers, anticancer drug delivery Results: Polymersomes provide both hydrophilic and hydrophobic drug delivery to a targeted site with an increase in the stability of the formulation and reduce the cytotoxic side effects of drugs.

CONCLUSION

A wide range of biological applications, including drug and gene delivery, insulin delivery, hemoglobin delivery, delivery of anticancer agents as well as in various diagnostic purposes. Recently, polymersomes have been used more frequently because of their stability, reducing the encapsulated drug's leakage, site-specific drug delivery, and increasing the bioavailability of the drugs and different diagnostic purposes. The liposomes encapsulate only hydrophilic drugs, but polymersomes encapsulate both hydrophilic and hydrophobic drugs in their cores.

Heterogeneous Synthetic Vesicles toward Artificial Cells: Engineering Structure and Composition of Membranes for Multimodal Functionalities

The desire to develop artificial cells to imitate living cells in synthetic vesicle platforms has continuously increased over the past few decades. In particular, heterogeneous synthetic vesicles made from two or more building blocks have attracted attention for artificial cell applications based on their multifunctional modules with asymmetric structures. In addition to the traditional liposomes or polymersomes, polypeptides and proteins have recently been highlighted as potential building blocks to construct artificial cells owing to their specific biological functionalities. Incorporating one or more functionally folded, globular protein into synthetic vesicles enables more cell-like functions mediated by proteins. This Review highlights the recent research about synthetic vesicles toward artificial cell models, from traditional synthetic vesicles to protein-assembled vesicles with asymmetric structures. We aim to provide fundamental and practical insights into applying knowledge on molecular self-assembly to the bottom-up construction of artificial cell platforms with heterogeneous building blocks.

Extracellular Vesicles Derived from Mesenchymal Stromal Cells Delivered during Hypothermic Oxygenated Machine Perfusion Repair Ischemic/Reperfusion Damage of Kidneys from Extended Criteria Donors

Simple Summary

In this study, we explore for the first time an innovative tool for organ preservation aimed to preventing ischemia reperfusion injury (IRI) in marginal kidneys from expanded criteria donors (ECD) unsuitable for transplantation. Ex vivo hypothermic oxygenated perfusion (HOPE) with and without MSC-derived EV and normothermic reperfusion (NR) with artificial blood composed of bovine hemoglobin were applied on kidneys to evaluate global renal ischemic damage score, renal ultrastructure, mitochondrial distress, apoptosis, cell proliferation index, and the mediators of energy metabolism. Our study demonstrates that kidney conditioning with HOPE+EV arrests the ischemic damage, prevents reoxygenation-dependent injury, and preserves tissue integrity. EV delivery during HOPE can be considered a new organ preservation strategy to increase the donor pool and improving transplant outcome. The originality of our study lies an EV and HOPE combined novel setting use in kidneys from ECD, but also in any condition for graft dysfunction such as ischemia/reperfusion.

Abstract

The poor availability of kidney for transplantation has led to a search for new strategies to increase the donor pool. The main option is the use of organs from extended criteria donors. We evaluated the effects of hypothermic oxygenated perfusion (HOPE) with and without extracellular vesicles (EV) derived from mesenchymal stromal cells on ischemic/reperfusion injury of marginal kidneys unsuitable for transplantation. For normothermic reperfusion (NR), we used artificial blood as a substitute for red blood cells. We evaluated the global renal ischemic dam-age score (GRS), analyzed the renal ultrastructure (RU), cytochrome c oxidase (COX) IV-1 (a mitochondrial distress marker), and caspase-3 renal expression, the tubular cell proliferation index, hepatocyte growth factor (HGF) and vascular endothelial growth factor (VEGF) tissue levels, and effluent lactate and glucose levels. HOPE+EV kidneys had lower GRS and better RU, higher COX IV-1 expression and HGF and VEGF levels and lower caspase-3 expression than HOPE kidneys. During NR, HOPE+EV renal effluent had lower lactate release and higher glucose levels than HOPE renal effluent, suggesting that the gluconeogenesis system in HOPE+EV group was pre-served. In conclusion, EV delivery during HOPE can be considered a new organ preservation strategy for increasing the donor pool and improving transplant outcome.

Asymmetric polymersomes, from the formation of asymmetric membranes to the application on drug delivery

Nano drug delivery systems have attracted researchers' growing attention and are gradually emerging into the public views. More and more nano-formulations are being approved for marketing or clinical use, representing the field's booming development. Copolymer self-assembly systems such as micelles, nanoparticles, polymersomes occupy a prominent position in the field of nano-drug delivery carriers. Among them, polymersomes, unlike micelles or nanoparticles, resemble liposomes' structure and possess large internal hollow hydrophilic reservoirs, allowing them to carry hydrophilic drugs. Nevertheless, their insufficient drug loading efficiency and unruly self-assembly morphology have somewhat constrained their applications. Especially for the delivery of biomacromolecule such as peptides, the encapsulation efficiency is always considered to be a formidable obstacle, even if the enormous hydrophilic core would render the polymersomes to have considerable potential in this regard. Reassuringly, the emergence of asymmetric polymersomes holds the prospect of solving this problem. With the development of synthetic technology and a deeper understanding of the self-assembly process, the asymmetric polymersomes which are with different inner and outer shell composition have been gradually recognized by researchers. It has made possible elevated drug loading, more controllable assembly processes and release performance. The internal hydrophilic blocks different from the outer shell could be engineered to have a more remarkable affinity to the cargos or could contain a non-watery aqueous phase to enable the thermodynamically preferred encapsulation of cargos, which would allow for a substantial improvement in drug encapsulation efficiency compared to the conventional approach. In this paper, we aim to deepen the understanding to asymmetric polymersomes and lay the foundation for the development of this field by describing four main elements: the mechanism of their preparation and asymmetric membrane formation process, the characterization of asymmetric membranes, the efficient drug loading, and the special stimulus-responsive release mechanism.

Preparation of Artificial Red Blood Cells (Hemoglobin Vesicles) Using the Rotation-Revolution Mixer for High Encapsulation Efficiency

Hemoglobin vesicles (Hb-V) are artificial red blood cells encapsulating highly concentrated hemoglobin (Hb) in liposomes comprising phospholipids, cholesterol, negatively charged lipids, and polyethylene glycol (PEG)-conjugated phospholipids. Safety and efficacy of Hb-V as a transfusion alternative have been extensively studied. For this study, we prepared Hb-V using the kneading method with a rotation-revolution mixer as an alternative to the conventional extrusion method. We optimized the kneading operation parameters to obtain Hb-V with a high yield. Results show that the Hb encapsulation efficiency was increased dramatically up to 74.2%, which is higher than that of the extrusion method (20%) because the kneading method enabled mixing of a highly concentrated carbonylhemoglobin (HbCO) solution (40 g/dL) and a considerably large amount of powdered lipids in only 10 min. The high viscosity of the Hb-lipid mixture paste (ca. 10³-10⁵ cP) favorably induces frictional heat by kneading and increases the paste temperature (ca. 60 °C), which facilitates lipid dispersion and liposome formation. During the kneading operation using a thermostable HbCO solution, Hb denaturation was prevented. Hb-V prepared using this method showed no marked changes in particle sizes, Hb denaturation, or Hb leakage from liposomes during two years of long-term storage-stability tests. Collectively, these results demonstrate that the kneading method using a rotation-revolution mixer shows good potential as a new method to produce Hb-V.

Entropy-Driven Supramolecular Ring-Opening Polymerization of a Cyclic Hemoglobin Monomer for Constructing a Hemoglobin-PEG Alternating Polymer with Structural Regularity

Our earlier report described that a cyclic hemoglobin (Hb) monomer with two β subunits of a Hb molecule (α₂β₂) bound through a flexible polyethylene glycol (PEG) chain undergoes reversible supramolecular ring-opening polymerization (S-ROP) to produce a supramolecular Hb polymer with a Hb-PEG alternating structure. In this work, we polymerized cyclic Hb monomers with different ring sizes (2, 5, 10, or 20 kDa PEG) to evaluate the thermodynamics of S-ROP equilibrium. Quantification of the produced supramolecular Hb polymers and the remaining cyclic Hb monomers in the equilibrium state revealed a negligibly small enthalpy change in S-ROP (ΔH_p ≤ 1 kJ·mol^-1) and a markedly positive entropy change increasing with the ring size (ΔS_p = 26.8-33.2 J·mol^-1·K^-1). The results suggest an entropy-driven mechanism in S-ROP: a cyclic Hb monomer with the larger ring size prefers to form a supramolecular Hb polymer. The S-ROP used for this study has the potential to construct submicrometer-sized Hb-PEG alternating polymers having structural regularity.

Tuning the vesicle-to-worm transition for thermoresponsive block copolymer vesicles prepared via polymerisation-induced self-assembly

Does statistical copolymerization of n-butyl methacrylate with benzyl methacrylate lower the critical temperature required for vesicle-to-worm and worm-to-sphere transitions for diblock copolymer nano-objects in mineral oil?

Stepping stones to the future of haemoglobin-based blood products: clinical, preclinical and innovative examples

Critical overview of the different oxygen therapeutics developed so far to be used when donor blood is not available.

Hemoglobin-based Oxygen Carriers: Current State-of-the-art and Novel Molecules

In blood, the primary role of red blood cells (RBCs) is to transport oxygen via highly regulated mechanisms involving hemoglobin (Hb). Hb is a tetrameric porphyrin protein comprising of two α- and two β-polypeptide chains, each containing an iron-containing heme group capable of binding one oxygen molecule. In military as well as civilian traumatic exsanguinating hemorrhage, rapid loss of RBCs can lead to suboptimal tissue oxygenation and subsequent morbidity and mortality. In such cases, transfusion of whole blood or RBCs can significantly improve survival. However, blood products including RBCs present issues of limited availability and portability, need for type matching, pathogenic contamination risks, and short shelf-life, causing substantial logistical barriers to their prehospital use in austere battlefield and remote civilian conditions. While robust research is being directed to resolve these issues, parallel research efforts have emerged toward bioengineering of semisynthetic and synthetic surrogates of RBCs, using various cross-linked, polymeric, and encapsulated forms of Hb. These Hb-based oxygen carriers (HBOCs) can potentially provide therapeutic oxygenation when blood or RBCs are not available. Several of these HBOCs have undergone rigorous preclinical and clinical evaluation, but have not yet received clinical approval in the USA for human use. While these designs are being optimized for clinical translations, several new HBOC designs and molecules have been reported in recent years, with unique properties. The current article will provide a comprehensive review of such HBOC designs, including current state-of-the-art and novel molecules in development, along with a critical discussion of successes and challenges in this field.

Extremely Effective Chemoradiotherapy by Inducing Immunogenic Cell Death and Radio-Triggered Drug Release under Hypoxia Alleviation

Local hypoxia in solid malignancies often results in resistance to radiotherapy (RT) and chemotherapy (CT), which may be one of the main reasons for their failure in clinical application. Especially, oxygen is an essential element for enhancing DNA damage caused by ionizing radiation in radiotherapy. Here, two biomimetic oxygen delivery systems were designed by encapsulating hemoglobin (Hb) alone into a liposome (Hb-Lipo) or co-encapsulating Hb and doxorubicin (DOX) into a liposome (DOX-Hb-Lipo). Our data indicated that both Hb-Lipo and DOX-Hb-Lipo could effectively alleviate hypoxia in tumors. We demonstrated that RT plus tumor-targeting delivery of oxygen mediated by Hb-Lipo could significantly overcome the tolerance of hypoxic cancer cells to RT, showing significantly enhanced cancer-cell killing and tumor growth inhibition ability, mainly attributing to hypoxia alleviation and increased reactive oxygen species production under RT in cancer cells. Furthermore, a melanoma model that was quite insensitive to both RT and CT was used to test the efficacy of chemoradiotherapy combined with hypoxia alleviation. RT plus Hb-Lipo only caused a limited increase in antitumor activity. However, extremely strong tumor inhibition could be obtained by RT combined with DOX-Hb-Lipo-mediated CT, attributed to radio-triggered DOX release and enhanced immunogenic cell death induced by RT under an oxygen supplement. Our study provided a valuable reference for overcoming hypoxia-induced radioresistance and a useful therapeutic strategy for cancers that are extremely insensitive to chemo- or radiotherapy.

Improving cancer therapy through the nanomaterials-assisted alleviation of hypoxia

Hypoxia, resulting from the imbalance between oxygen supply and consumption is a critical component of the tumor microenvironment. It has a paramount impact on cancer growth, metastasis and has long been known as a major obstacle for cancer therapy. However, none of the clinically approved anticancer therapeutics currently available for human use directly tackles this problem. Previous clinical trials of targeting tumor hypoxia with bioreductive prodrugs have failed to demonstrate satisfactory results. Therefore, new ideas are needed to overcome the hypoxia barrier. The method of modulating hypoxia to improve the therapeutic activity is of great interest but remains a considerable challenge. One of the emerging concepts is to supply or generate oxygen at the tumor site to increase the partial oxygen pressure and thereby reverse the hypoxia and its effects. In this review, we present an overview of the recent progress in the development of novel nanomaterials for the alleviation of hypoxic microenvironment. Two main strategies for hypoxia augmentation, i) direct delivery of O₂ into the tumor, and ii) in situ O₂ generations in the tumor microenvironment through different methods such as catalytic decomposition of endogenous hydrogen peroxide (H₂O₂) and light-triggered water splitting are discussed in detail. At present, these emerging nanomaterials are in their early phase and expected to grow rapidly in the coming years. Despite the promising start, there are several challenges needed to overcome for successful clinical translation.

Molecular Assemblies of Biomimetic Microcapsules

Layer-by-layer (LbL) assembly is a most commonly used method to prepare various microcapsules based on the electrostatic interactions, hydrogen bonding, covalent bonding, and so on. Among these interactions, Schiff base bond formed in covalent assembly not only has an advantage in stability, but also enables the assembled microcapsules with autofluorescence and pH sensitivity. In this Article, we will mainly describe the construction of biomimetic microcapsules through Schiff base mediated LbL assembly. The structures and properties of the assembled microcapsules are introduced and their applications as drug carriers are highlighted.

Cross-Linked Polymersomes with Reversible Deformability and Oxygen Transportability

Polymersomes are of interest as nanocarriers due to their physical and chemical robustness, which arises from the macromolecular nature of their block copolymer components. However, the physical robustness of polymersomes impairs transmembrane diffusion and responsiveness to mechanical forces. Polymer nanocarriers that can reversibly deform under stress while maintaining structural integrity and transmembrane diffusivity are desired for development of gas transport vehicles. Here, we report polymersomes composed of amphiphilic block copolymers containing polydimethylsiloxane with side-chain pendant vinyl groups. A reversibly deformable polymersome compartmentalizing membrane was obtained by cross-linkage of PEG- b-poly(dimethyl- r-methylvinyl)silane in a self-assembled bilayer via photoradical generation in aqueous media. The covalently cross-linked polymersomes exhibited superior physical robustness compared to unlinked polymersomes while maintaining deformability under stress. Transmembrane oxygen diffusion was confirmed when lumen-encapsulated Zn-porphyrin generated singlet O₂ under irradiation, and the anthracene-9,10-dipropionic acid O₂ quencher was consumed. Polymersome-encapsulated hemoglobin bound oxygen reversibly, indicating the polymersomes could be used as O₂ carriers that reversibly deform without sacrificing structural integrity or oxygen transportability.

Toward Functional Synthetic Cells: In-Depth Study of Nanoparticle and Enzyme Diffusion through a Cross-Linked Polymersome Membrane

Understanding the diffusion of nanoparticles through permeable membranes in cell mimics paves the way for the construction of more sophisticated synthetic protocells with control over the exchange of nanoparticles or biomacromolecules between different compartments. Nanoparticles postloading by swollen pH switchable polymersomes is investigated and nanoparticles locations at or within polymersome membrane and polymersome lumen are precisely determined. Validation of transmembrane diffusion properties is performed based on nanoparticles of different origin-gold, glycopolymer protein mimics, and the enzymes myoglobin and esterase-with dimensions between 5 and 15 nm. This process is compared with the in situ loading of nanoparticles during polymersome formation and analyzed by advanced multiple-detector asymmetrical flow field-flow fractionation (AF4). These experiments are supported by complementary i) release studies of protein mimics from polymersomes, ii) stability and cyclic pH switches test for in polymersome encapsulated myoglobin, and iii) cryogenic transmission electron microscopy studies on nanoparticles loaded polymersomes. Different locations (e.g., membrane and/or lumen) are identified for the uptake of each protein. The protein locations are extracted from the increasing scaling parameters and the decreasing apparent density of enzyme-containing polymersomes as determined by AF4. Postloading demonstrates to be a valuable tool for the implementation of cell-like functions in polymersomes.

Towards feedback-controlled nanomedicines for smart, adaptive delivery

IMPACT STATEMENT

The timing and rate of release of pharmaceuticals from advanced drug delivery systems is an important property that has received considerable attention in the scientific literature. Broadly, these mostly fall into two classes: controlled release with a prolonged release rate or triggered release where the drug is rapidly released in response to an environmental stimulus. This review aims to highlight the potential for developing adaptive release systems that more subtlety modulate the drug release profile through continuous communication with its environment facilitated through feedback control. By reviewing the key elements of this approach in one place (fundamental principles of nanomedicine, enzymatic nanoreactors for medical therapies and feedback-controlled chemical systems) and providing additional motivating case studies in the context of chronobiology, we hope to inspire innovative development of novel "chrononanomedicines."

Evolution of diverse higher-order membrane structures of block copolymer vesicles

An evolutionary route to polymer vesicles with diverse higher-order membrane structures has been discovered.

Biotransporting Biocatalytic Reactors toward Therapeutic Nanofactories

Drug-delivery systems (DDSs), in which drug encapsulation in nanoparticles enables targeted delivery of therapeutic agents and their release at specific disease sites, are important because they improve drug efficacy and help to decrease side effects. Although significant progress has been made in the development of DDSs for the treatment of a wide range of diseases, new approaches that increase the scope and effectiveness of such systems are still needed. Concepts such as nanoreactors and nanofactories are therefore attracting much attention. Nanoreactors, which basically consist of vesicle-encapsulated enzymes, provide prodrug conversion to therapeutic agents rather than simple drug delivery. Nanofactories are an extension of this concept and combine the features of nanoreactors and delivery carriers. Here, the required features of nanofactories are discussed and an overview of current strategies for the design and fabrication of different types of nanoreactors, i.e., systems based on lipid or polymer vesicles, capsules, mesoporous silica, viral capsids, and hydrogels, and their respective advantages and shortcomings, is provided. In vivo applications of biocatalytic reactors in the treatment of cancer, glaucoma, neuropathic pain, and alcohol intoxication are also discussed. Finally, the prospects for further progress in this important and promising field are outlined.

High- and low-affinity PEGylated hemoglobin-based oxygen carriers: Differential oxidative stress in a Guinea pig transfusion model

Hemoglobin-based oxygen carriers (HBOCs) are an investigational replacement for blood transfusions and are known to cause oxidative damage to tissues. To investigate the correlation between their oxygen binding properties and these detrimental effects, we investigated two PEGylated HBOCs endowed with different oxygen binding properties - but otherwise chemically identical - in a Guinea pig transfusion model. Plasma samples were analyzed for biochemical markers of inflammation, tissue damage and organ dysfunction; proteins and lipids of heart and kidney extracts were analyzed for markers of oxidative damage. Overall, both HBOCs produced higher oxidative stress in comparison to an auto-transfusion control group. Particularly, tissue 4-hydroxynonenal adducts, tissue malondialdehyde adducts and plasma 8-oxo-2'-deoxyguanosine exhibited significantly higher levels in comparison with the control group. For malondialdehyde adducts, a higher level in the renal tissue was observed for animals treated with the high-affinity HBOC, hinting at a correlation between the HBOCs oxygen binding properties and the oxidative stress they produce. Moreover, we found that the high-affinity HBOC produced greater tissue oxygenation in comparison with the low affinity one, possibly correlating with the higher oxidative stress it induced.

Challenges for the Self-Assembly of Poly(Ethylene Glycol)⁻Poly(Lactic Acid) (PEG-PLA) into Polymersomes: Beyond the Theoretical Paradigms

Polymersomes (PL), vesicles formed by self-assembly of amphiphilic block copolymers, have been described as promising nanosystems for drug delivery, especially of biomolecules. The film hydration method (FH) is widely used for PL preparation, however, it often requires long hydration times and commonly results in broad size distribution. In this work, we describe the challenges of the self-assembly of poly (ethylene glycol)-poly(lactic acid) (PEG-PLA) into PL by FH exploring different hydrophilic volume fraction (f) values of this copolymer, stirring times, temperatures and post-FH steps in an attempt to reduce broad size distribution of the nanostructures. We demonstrate that, alongside f value, the methods employed for hydration and post-film steps influence the PEG-PLA self-assembly into PL. With initial FH, we found high PDI values (>0.4). However, post-hydration centrifugation significantly reduced PDI to 0.280. Moreover, extrusion at higher concentrations resulted in further improvement of the monodispersity of the samples and narrow size distribution. For PL prepared at concentration of 0.1% (m/v), extrusion resulted in the narrower size distributions corresponding to PDI values of 0.345, 0.144 and 0.081 for PEG₄₅-PLA₆₉, PEG₁₁₄-PLA₁₅₃ and PEG₁₁₄-PLA₁₈₀, respectively. Additionally, we demonstrated that copolymers with smaller f resulted in larger PL and, therefore, higher encapsulation efficiency (EE%) for proteins, since larger vesicles enclose larger aqueous volumes.

Liposomes and polymersomes: a comparative review towards cell mimicking

Minimal cells: we compare and contrast liposomes and polymersomes for a bettera priorichoice and design of vesicles and try to understand the advantages and shortcomings associated with using one or the other in many different aspects (properties, synthesis, self-assembly, applications).

Bio-inspired nanomedicine strategies for artificial blood components

Blood is a fluid connective tissue where living cells are suspended in noncellular liquid matrix. The cellular components of blood render gas exchange (RBCs), immune surveillance (WBCs) and hemostatic responses (platelets), and the noncellular components (salts, proteins, etc.) provide nutrition to various tissues in the body. Dysfunction and deficiencies in these blood components can lead to significant tissue morbidity and mortality. Consequently, transfusion of whole blood or its components is a clinical mainstay in the management of trauma, surgery, myelosuppression, and congenital blood disorders. However, donor-derived blood products suffer from issues of shortage in supply, need for type matching, high risks of pathogenic contamination, limited portability and shelf-life, and a variety of side-effects. While robust research is being directed to resolve these issues, a parallel clinical interest has developed toward bioengineering of synthetic blood substitutes that can provide blood's functions while circumventing the above problems. Nanotechnology has provided exciting approaches to achieve this, using materials engineering strategies to create synthetic and semi-synthetic RBC substitutes for enabling oxygen transport, platelet substitutes for enabling hemostasis, and WBC substitutes for enabling cell-specific immune response. Some of these approaches have further extended the application of blood cell-inspired synthetic and semi-synthetic constructs for targeted drug delivery and nanomedicine. The current study provides a comprehensive review of the various nanotechnology approaches to design synthetic blood cells, along with a critical discussion of successes and challenges of the current state-of-art in this field. WIREs Nanomed Nanobiotechnol 2017, 9:e1464. doi: 10.1002/wnan.1464 For further resources related to this article, please visit the WIREs website.

Facile assembly and loading of theranostic polymersomes via multi-impingement flash nanoprecipitation

Flash nanoprecipitation (FNP) has proven to be a powerful tool for the rapid and scalable assembly of solid-core nanoparticles from block copolymers. The process can be performed using a simple confined impingement jets mixer and provides an efficient and reproducible method of loading micelles with hydrophobic drugs. To date, FNP has not been applied for the fabrication of complex or vesicular nanoarchitectures capable of encapsulating hydrophilic molecules or bioactive protein therapeutics. Here, we present FNP as a single customizable method for the assembly of bicontinuous nanospheres, filomicelles and vesicular, multilamellar and tubular polymersomes from poly(ethylene glycol)-bl-poly(propylene sulfide) block copolymers. Multiple impingements of polymersomes assembled via FNP were shown to decrease vesicle diameter and polydispersity, allowing gram-scale fabrication of monodisperse polymersomes within minutes. Furthermore, we demonstrate that FNP supports the simultaneous loading of both hydrophobic and hydrophilic molecules respectively into the polymersome membrane and aqueous lumen, and encapsulated enzymes were found to be released and remain active following vesicle lysis. As an example application, theranostic polymersomes were generated via FNP that were dual loaded with the immunosuppressant rapamycin and a fluorescent dye to link targeted immune cells with the elicited immunomodulation of T cells. By expanding the capabilities of FNP, we present a rapid, scalable and reproducible method of nanofabrication for a wide range of nanoarchitectures that are typically challenging to assemble and load with therapeutics for controlled delivery and theranostic strategies.

The role of nanotechnology in the treatment of viral infections

Infectious diseases are the leading cause of mortality worldwide, with viruses in particular making global impact on healthcare and socioeconomic development. In addition, the rapid development of drug resistance to currently available therapies and adverse side effects due to prolonged use is a serious public health concern. The development of novel treatment strategies is therefore required. The interaction of nanostructures with microorganisms is fast-revolutionizing the biomedical field by offering advantages in both diagnostic and therapeutic applications. Nanoparticles offer unique physical properties that have associated benefits for drug delivery. These are predominantly due to the particle size (which affects bioavailability and circulation time), large surface area to volume ratio (enhanced solubility compared to larger particles), tunable surface charge of the particle with the possibility of encapsulation, and large drug payloads that can be accommodated. These properties, which are unlike bulk materials of the same compositions, make nanoparticulate drug delivery systems ideal candidates to explore in order to achieve and/or improve therapeutic effects. This review presents a broad overview of the application of nanosized materials for the treatment of common viral infections.

Artificial Blood Substitutes: First Steps on the Long Route to Clinical Utility

The 21st century is challenging for human beings. Increased population growth, population aging, generation of new infectious agents, and natural disasters are some threatening factors for the current state of blood transfusion. However, it seems that science and technology not only could overcome these challenges but also would turn many human dreams to reality in this regard. Scientists believe that one of the future evolutionary innovations could be artificial blood substitutes that might pave the way to a new era in transfusion medicine. In this review, recent status and progresses in artificial blood substitutes, focusing on red blood cells substitutes, are summarized. In addition, steps taken toward the development of artificial blood technology and some of their promises and hurdles will be highlighted. However, it must be noted that artificial blood is still at the preliminary stages of development, and to fulfill this dream, ie, to routinely transfuse artificial blood into human vessels, we still have to strengthen our knowledge and be patient.

Hemoglobin-Based Nanoarchitectonic Assemblies as Oxygen Carriers

Safe and effective artificial oxygen carriers are the subject of great interest due to the problems of traditional blood transfusion and enormous demand in clinical use. In view of its unique oxygen-transport ability and normal metabolic pathways, hemoglobin is regarded as an ideal oxygen-carrying unit. With advances in nano-biotechnology, hemoglobin assemblies as artificial oxygen carriers achieve great development. Here, recent progress on hemoglobin-based oxygen carriers is highlighted in view of two aspects: acellular hemoglobin-based oxygen carriers and cellular hemoglobin-based oxygen carriers. These novel oxygen carriers exhibit advantages over traditional carriers and will greatly promote research on reliable and feasible oxygen carriers.

Nanoparticles combined with growth factors: recent progress and applications

Increasing attention has been focused on the applications of nanoparticles combined with growth factors (NPs/GFs) due to the substantial functions of GFs in regenerative medicine and disease treatments.

Nanostructures for protein drug delivery

Nanostructured systems, such as nanoemulsions and polymersomes, are important tools to develop safe and effective therapeutic protein preparations.

Progressive Saturation Improves the Encapsulation of Functional Proteins in Nanoscale Polymer Vesicles

PURPOSE

To develop a technique that maximizes the encapsulation of functional proteins within neutrally charged, fully PEGylated and nanoscale polymer vesicles (i.e., polymersomes).

METHODS

Three conventional vesicle formation methods were utilized for encapsulation of myoglobin (Mb) in polymersomes of varying size, PEG length, and membrane thickness. Mb concentrations were monitored by UV-Vis spectroscopy, inductively coupled plasma optical emission spectroscopy (ICP-OES) and by the bicinchoninic acid (BCA) assay. Suspensions were subject to protease treatment to differentiate the amounts of surface-associated vs. encapsulated Mb. Polymersome sizes and morphologies were monitored by dynamic light scattering (DLS) and by cryogenic transmission electron microscopy (cryo-TEM), respectively. Binding and release of oxygen were measured using a Hemeox analyzer.

RESULTS

Using the established "thin-film rehydration" and "direct hydration" methods, Mb was found to be largely surface-associated with negligible aqueous encapsulation within polymersome suspensions. Through iterative optimization, a novel "progressive saturation" technique was developed that greatly increased the final concentrations of Mb (from < 0.5 to > 2.0 mg/mL in solution), the final weight ratio of Mb-to-polymer that could be reproducibly obtained (from < 1 to > 4 w/w% Mb/polymer), as well as the overall efficiency of Mb encapsulation (from < 5 to > 90%). Stable vesicle morphologies were verified by cryo-TEM; the suspensions also displayed no signs of aggregate formation for > 2 weeks as assessed by DLS. "Progressive saturation" was further utilized for the encapsulation of a variety of other proteins, ranging in size from 17 to 450 kDa.

CONCLUSIONS

Compared to established vesicle formation methods, "progressive saturation" increases the quantities of functional proteins that may be encapsulated in nanoscale polymersomes.

Natural liposomes and synthetic polymeric structures for biomedical applications

In the last decades, the development and design of drug delivery systems have attracted great attention. Especially siRNA carriers have been of special interest since discovered as suitable tool for gene silencing. Self-assembled structures consisting of amphiphilic molecules are the most investigated carriers with regards to siRNA delivery. Liposomes as drug vehicles already found their way into clinical use, as they are highly biocompatible and their colloidal stability and circulation time in blood can be significantly enhanced by PEGylation. Fully synthetic polymersomes inspired by these natural structures provide enhanced stability and offer a wide range of modification-possibilities. Therefore, their design as carrier vehicles has become of great interest. This mini-review highlights the possibilities of using polymeric vesicles for potential drug delivery and gives a brief overview of their potential regarding fine-tuning towards targeted delivery or triggered drug release.

Uniform hydrogel-filled elastomer microcapsules structured with mechanically resilient complex shell layers

Controlled polymerization of polyurethane precursors between the interfaces of W/O/W double emulsion drops leads to the production of a mechanically resilient but flexible microshell structure.