Evidence for egg-box-compatible interactions in calcium-alginate gels from fiber X-ray diffraction

Structural characteristics and gelling properties of citrus pectins after chemical and enzymatic modifications: Conformation plays a vital role in Ca2+-induced gelation

Due to the excellent health benefits of rhamnogalacturonan I (RG-I)-enriched pectin, there has been increasing research interest in its gelling properties. To elucidate its structure-gelation relationship, chemical modifications were used to obtain RG-I-enriched pectin (P11). Then, enzymatic modification was performed to obtain debranched pectins GP11 and AP11, respectively. The effects of RG-I side chains on structural characteristics (especially spatial conformation) and gelling properties were investigated. Among the low-methoxylated pectins (LMPs), AP11, with a loose conformation (Dmax 52 nm) showed the poorest gelling, followed by GP11. In addition to primary structure, spatial conformation (Dmax and Rg) also showed strong correlations (r2 > 0.8) with gelation. We speculate that compact conformation may shorten distance between pectin chains and reduces steric hindrance, contributing to formation of strong gel network. This is particularly important in LMPs with abundant side chains. The results provide novel insights into relationship between spatial conformation and gelling properties of RG-I-enriched pectin.

Magnesium vs. sodium alginate as precursors of calcium alginate: Mechanical differences and advantages in the development of functional neuronal networks

Calcium alginate is one of the most widely employed matrices in regenerative medicine. A downside is its heterogeneity, due to the poorly controllable character of the gelation of sodium alginate (NaAlg), i.e. the commonly used alginate salt, with calcium. Here, we have used magnesium alginate (MgAlg) as an alternative precursor of calcium alginate. MgAlg coils, more compact and thus less entangled than those of NaAlg, allow for an easier diffusion of calcium ions, whereas Mg is exchanged with calcium more slowly than Na; this allows for the formation of a material (Ca(Mg)Alg) with a more reversible creep behaviour than Ca(Na)Alg, due to a more homogeneous - albeit lower - density of elastically active cross-links. We also show that Ca(Mg)Alg supports better than Ca(Na)Alg the network development and function of embedded (rat cortical) neurons: they show greater neurite extension and branching at 7 and 21 days (Tubb3 and Map2 immunofluorescence) and better neuronal network functional maturation / more robust and longer-lasting activity, probed by calcium imaging and microelectrode array electrophysiology. Overall, our results unveil the potential of MgAlg as bioactive biomaterial for enabling the formation of functional neuron-based tissue analogues.

Eco-friendly electronic food labels: Development and application of Ion-SSPB double network hydrogel

Although various conductive hydrogels have been developed for sensing, ideal materials for meeting the safety and toughness requirements of food detection are still lacking. This study introduces Ion-SSPB, a conductive hydrogel fabricated from eco-friendly, food-grade materials such as corn starch (CS), sodium alginate (SA), polyvinyl alcohol (PVA) and bentonite (BT). It leverages a green manufacturing approach designed for application in electronic food sensors. The hydrogel is achieved through a double network strategy and salt immersion method, which endows it with tunable mechanical and rheological properties. A key innovation of Ion-SSPB is the incorporation of bentonite, which enhances its performance, including low swelling, freezing resistance, and minimal residual adhesion. The hydrogel with 4% (w/v) BT concentration (Ion-SSPB4%) is an effective medium for detecting impedance changes in mangoes, correlating with their ripening stages. The Ion-SSPB hydrogel represents a significant advancement in the field of electronic food labels, combining environmental sustainability with technical efficacy.

Green, tough, and heat-resistant: A GDL-induced strategy for starch-alginate hydrogels

Hydrogels fabricated by non-covalent interaction garnered significant attention for their eco-friendly and robust mechanical attributes, and are often used in food, medicine and other fields. Although starch-alginate hydrogels exhibit high adhesion and are environmentally sustainable, their applications are limited due to their low elasticity and hardness. Addressing this challenge, we introduce a solvent-induced strategy using glucolactone (GDL) to fabricate hydrogels with enhanced strength and thermal resilience. Utilizing corn starch with varying amylose contents, sodium alginate and calcium carbonate to prepare a double network structure. This GDL-induced hydrogel outperforms most previous starch-based hydrogels in mechanical robustness and thermal stability. Typical starch-alginate hydrogel had a homogeneous network structure and exhibited a high tensile stress of 407.57 KPa, and a high enthalpy value of 1857.67 J/g. This investigation furnishes a facile yet effective method for the synthesis of hydrogels with superior mechanical and thermal properties, thereby broadening the design landscape for starch-based hydrogels.

Carbon-based single-atom catalysts derived from biomass: Fabrication and application

Single-atom catalysts (SACs) with active metals dispersed atomically have shown great potential in heterogeneous catalysis due to the high atomic utilization and superior selectivity/stability. Synthesis of SACs using carbon-neutral biomass and its components as the feedstocks provides a promising strategy to realize the sustainable and cost-effective SACs preparation as well as the valorization of underused biomass resources. Herein, we begin by describing the general background and status quo of carbon-based SACs derived from biomass. A detailed enumeration of the common biomass feedstocks (e.g., lignin, cellulose, chitosan, etc.) for the SACs preparation is then offered. The interactions between metal atoms and biomass-derived carbon carriers are summarized to give general rules on how to stabilize the atomic metal centers and rationalize porous carbon structures. Furthermore, the widespread adoption of catalysts in diverse domains (e.g., chemocatalysis, electrocatalysis and photocatalysis, etc.) is comprehensively introduced. The structure-property relationships and the underlying catalytic mechanisms are also addressed, including the influences of metal sites on the activity and stability, and the impact of the unique structure of single-atom centers modulated by metal/biomass feedstocks interactions on catalytic activity and selectivity. Finally, we end this review with a look into the remaining challenges and future perspectives of biomass-based SACs. We expect to shed some light on the forthcoming research of carbon-based SACs derived from biomass, manifestly stimulating the development in this emerging research area.

Development of raft-forming liquid formulations loaded with ginger extract-solid dispersion for treatment of gastric ulceration

Raft-forming liquid formulations incorporating ginger extract solid dispersion (GE-SD) were developed to achieve prolonged delivery of 6-gingerol in the stomach and thus increase the effectiveness of gastric ulcer treatment. The solubility of 6-gingerol in 0.1 N HCl (pH 1.2) was maximized (15 mg/mL) by combining ginger extract with PVP K30 at 1:3 w/w ratio to produce a solid dispersion. The nature of GE-SD was confirmed by PXRD and FT-IR analysis. PXRD pattern showed miscibility of GE and PVP K30 in amorphous solid dispersion and the FT-IR spectra confirmed the formation of hydrogen bond between GE and PVP K30. GE-SD-loaded raft-forming liquids were prepared using sodium alginate as a gel former and HPMC as a release-controlling agent. The formulations exhibited rapid floating behavior in 0.1 N HCl (<30 s) and remained afloat on the surface over 8 h. The formed raft structures provided sufficient strength (>7.5 g) and allowed sustained release of more than 70 % of the 6-gingerol content over 8 h in 0.1 N HCl. Raft-forming formulations incorporating ginger extract demonstrated anti-inflammatory activity by inhibiting nitric oxide production in LPS-stimulated RAW 264.7 macrophage cells (IC50 = 5.13 ± 0.07 μg/mL). Exposure to the formulations also had a significant cytotoxic effect on AGS human gastric adenocarcinoma cells with an IC50 of 17.45 ± 0.29 μg/mL. In addition, the raft-forming formulations enhanced the migratory behavior of L929 mouse fibroblasts in the scratch wound model. Taken together, these findings reveal the benefits of gastro-retentive, GE-SD-loaded raft-forming liquid formulations for improving the treatment of gastric ulcers.

Self-Assembly Reinforced Alginate Fibers for Enhanced Strength, Toughness, and Bone Regeneration

Material reinforcement commonly exists in a contradiction between strength and toughness enhancement. Herein, a reinforced strategy through self-assembly is proposed for alginate fibers. Sodium alginate (SA) microstructures with regulated secondary structures are assembled in acidic and ethanol as reinforcing units for alginate fibers. Acidity increases the flexibility of the helix and contributes to enhanced extendibility. Ethanol is responsible for formation of a stiff β-sheet, which enhances the modulus and strength. The structurally engineered SA assembly exhibits robust mechanical compatibility, and thus reinforced alginate fibers possess an improved tensile strength of 2.1 times, a prolonged elongation of 1.5 times, and an enhanced toughness of 3.0 times compared with SA fibers without reinforcement. The reinforcement through self-assembly provides an understanding of strengthening and toughening mechanism based on secondary structures. Due to a similar modulus with bones, reinforced alginate fibers exhibit good efficacy in accelerating bone regeneration in vivo.

Insights on updates in sodium alginate/MXenes composites as the designer matrix for various applications: A review

Advancements in two-dimensional materials, particularly MXenes, have spurred the development of innovative composites through their integration with natural polymers such as sodium alginate (SA). Mxenes exhibit a broad specific surface area, excellent electrical conductivity, and an abundance of surface terminations, which can be combined with SA to maximize the synergistic effect of the materials. This article provides a comprehensive review of state-of-the-art techniques in the fabrication of SA/MXene composites, analyzing the resulting structural and functional enhancements with a specific focus on advancing the design of these composites for practical applications. A detailed exploration of SA/MXene composites is provided, highlighting their utility in various sectors, such as wearable electronics, wastewater treatment, biomedical applications, and electromagnetic interference (EMI) shielding. The review identifies the unique advantages conferred by incorporating MXene in these composites, examines the current challenges, and proposes future research directions to understand and optimize these promising materials thoroughly. The remarkable properties of MXenes are emphasized as crucial for advancing the performance of SA-based composites, indicating significant potential for developing high-performance composite materials.

Disaggregation and fibrillation during sol-gel transition of alginate hydrogels

The rheological and morphological characteristics of Ca-crosslinked alginate hydrogels with two different M/G ratios, α-L-guluronate (G)-rich and β-D-mannuronate (M)-rich, each with one alginic acid concentration, were investigated. It was found that the stiffness and elasticity of alginate hydrogels are derived from the thickness and density of the fibril network structures. In aqueous alginate solution, ball-like aggregates of alginates are present. Time-resolved small-angle X-ray scattering and time-domain nuclear magnetic resonance measurements suggest that the disaggregation of alginate aggregates and loose fibrillation occur in the early stage of the sol-gel transition. After these induction stage, direct gelation is finally caused by the formation of the egg-box junction. G-rich alginate hydrogel has a higher stiffness and a thicker and denser fibril network structure than M-rich alginate hydrogel. The former also exhibits faster and more significant changes in physical properties during the sol-gel transition.

Formation of Microcapsules of Pullulan by Emulsion Template Mechanism: Evaluation as Vitamin C Delivery Systems

Pullulan is a polysaccharide that has attracted the attention of scientists in recent times as a former of edible films. On the other hand, its use for the preparation of hydrogels needs more study, as well as the formation of pullulan microcapsules as active ingredient release systems for the food industry. Due to the slow gelation kinetics of pullulan with sodium trimetaphosphate (STMP), capsules cannot be formed through the conventional method of dropping into a solution of the gelling agent, as with other polysaccharides, since the pullulan chains migrate to the medium before the capsules can form by gelation. Pullulan microcapsules have been obtained by using inverse water-in-oil emulsions as templates. The emulsion that acts as a template has been characterized by monitoring its stability and by optical microscopy, and the size of the emulsion droplets has been correlated with the size of the microcapsules obtained, demonstrating that it is a good technique for their production. Although some flocs of droplets form, these remain dispersed during the gelation process and two capsule size distributions are obtained: those of the non-flocculated droplets and the flocculated droplets. The microcapsules have been evaluated as vitamin C release systems, showing zero-order release kinetics for acidic pH and Fickian mechanism for neutral pH. On the other hand, the microcapsules offer good protection of vitamin C against oxidation during an evaluation period of 14 days.

Magnesium alginate as a low-viscosity (intramolecularly cross-linked) system for the sustained and neuroprotective release of magnesium

The administration of Mg ions is advantageous in pathological scenarios such as pre-enclampsia and forms of neuroinflammation (e.g. stroke or injury); yet, few systems exist for their sustained delivery. Here, we present the (static light scattering and diffusing-wave spectroscopy) characterization of magnesium alginate (MgAlg) as a potentially injectable vehicle ifor the delivery of Mg. Differently from other divalent cations, Mg does not readily induce gelation: it acts within MgAlg coils, making them more rigid and less prone to entangle. As a result, below a threshold concentration (notionally below 0.5 % wt.) MgAlg are inherently less viscous than those of sodium alginate (NaAlg), which is a major advantage for injectables; at higher concentrations, however, (stable, Mg-based) aggregation starts occurring. Importantly, Mg can then be released e.g. in artificial cerebrospinal fluid, via a slow (hours) process of ion exchange. Finally, we here show that MgAlg protects rat neural stem cells from the consequence of an oxidative insult (100 μM H2O2), an effect that we can only ascribe to the sustained liberation of Mg ions, since it was not shown by NaAlg, MgSO4 or the NaAlg/MgSO4 combination. Our results therefore indicate that MgAlg is a promising vehicle for Mg delivery under pathological (inflammatory) conditions.

Multi-layer encapsulation of pumpkin (Cucurbita maxima L.) seed protein hydrolysate and investigating its release and antioxidant activity in simulated gastrointestinal digestion

Because of their high protein content, easy access and low cost, pumpkin seeds are a valuable raw material for the preparation of antioxidant protein hydrolysates. Micro-coating is an effective method to protect bioactive compounds against destruction. In order to strengthen the alginate hydrogel network loaded with pumpkin seed protein hydrolysate (PSPH), CMC was added as part of its formulation in the first step, and chitosan coating was used in the second step. Then, swelling amount, release in the simulated gastrointestinal environment (SGI), antioxidant activity after SGI, Fourier transform infrared spectroscopy (FTIR), zeta potential, dynamic light scattering (DLS), polydispersity index (PDI) and scanning electron microscopy (SEM) of the samples were evaluated. The results showed that, the swelling amount of the chitosan-alginate hydrogel was lower than the chitosan-alginate-CMC sample, and with the increase in chitosan concentration, the swelling amount decreased. The release amount in the chitosan-alginate sample was higher than that in the chitosan-alginate-CMC sample, and with the increase in chitosan concentration, the release rate decreased. Also, the amount of release increased with the passage of time. The highest antioxidant activity belonged to the chitosan-alginate sample in SGI, and it increased with increasing the chitosan concentration. All findings demonstrated that the use of multi-component hybrid systems is a useful method for the protection of bioactive compounds against destruction, their antioxidant activities and their release behavior.

Anionic species from multivalent metal salts are differentially retained during aqueous ionic gelation of sodium alginate and could fine-tune the hydrogel properties

The role of anionic counterions of divalent metal salts in alginate gelation and hydrogel properties has been thoroughly investigated. Three anions were selected from the Hofmeister series, namely sulphate, acetate and chloride, paired in all permutations and combinations with divalent metal cations like calcium, zinc and copper. Spectroscopic analysis revealed the presence of anions and their interaction with the respective metal cations in the hydrogel. The data showed that the gelation time and other hydrogel properties were largely controlled by cations. However, subtle yet significant variations in viscoelasticity, water uptake, drug release and cytocompatibility properties were anion dependent in each cationic group. Computational modelling based study showed that metal-anion-alginate configurations were energetically more stable than the metal-alginate models. The in vitro and in silico studies concluded that acetate anions preceded chlorides in the drug release, swelling and cytocompatibility fronts, followed by sulphate anions in each cationic group. Overall, the data confirmed that anions are an integral part of the metal-alginate complex. Furthermore, anions offer a novel option to further fine-tune the properties of alginate hydrogels for myriads of applications. In addition, full exploration of this novel avenue would enhance the usability of alginate polymers in the pharmaceutical, environmental, biomedical and food industries.

Crosslinking alginate at water-in-water Pickering emulsions interface to control the interface structure and enhance the stress resistance of the encapsulated probiotics

HYPOTHESIS

The strategies for stabilizing water-in-water (W/W) emulsions include the adsorption of solid particles at the water-water interface and the generation of interfacial films. We hypothesize that if sodium alginate is crosslinked at the water-water interface of W/W Pickering emulsions, the microstructure and rheological properties of the emulsions could be improved, thus enhancing the activity of encapsulated probiotics in simulated gastrointestinal digestion.

EXPERIMENTS

The W/W Pickering emulsions comprised a dispersed maltodextrin (MD) phase in a continuous hydroxypropyl methylcellulose (HPMC) phase. The crosslinking W/W Pickering emulsion with fine-tuned internal structure was designed by leaching the CaCO3 particles packed in the dispersed phase to release Ca2+ crosslinked with sodium alginate.

FINDINGS

Confocal laser scanning microscope results revealed sodium alginate crosslinked with Ca2+ at the W/W interface. The rheological results of the crosslinking W/W Pickering emulsions suggested that the loss modulus (G″) was higher than the energy storage modulus (G'). The microstructure indicated that the emulsions formed a dense porous network structure after crosslinking conditions. The viable cell count of Lactobacillus helveticus CICC 22536 (LC) encapsulated in crosslinking W/W Pickering emulsion after simulated gastrointestinal digestion was 7.563 × 107 CFU/mL, which was three orders of magnitude higher than that of naked cells.

Mixed whey and pea protein based cold-set emulsion gels induced by calcium chloride: Fabrication and characterization

The cold-set gels of oil-in-water emulsions stabilized by mixtures of whey protein isolate (WPI) and pea protein isolate (PPI) with mass ratios of 10:0, 7:3, 5:5, 3:7, and 0:10 were investigated to evaluate the possibility of pea protein to replace milk protein. Particle size and surface charge of emulsions increased and decreased with raised PPI content, respectively. The redness and yellowness of emulsion gels were strengthened with elevated pea protein percentage and independent of calcium concentration applied. Considerable differences in water holding capacity were observed between samples with different mixed proteins and high percentage of pea protein gave better water retaining ability. Gradual decreases in hardness and chewiness of emulsion gels were observed at three calcium levels with the increased PPI proportion. FT-IR spectra indicated no new covalent bonds were generated between samples with different whey and pea protein mass ratios. As PPI concentration elevated, the network structure of emulsion gels gradually became loose and disordered. The established cold-set calcium-induced whey/pea protein composite gels may have the potential to be utilized as a new material to encapsulate and deliver environment sensitive bio-active substances.

Alginate-metal cation interactions: Macromolecular approach

Alginates are a broad family of linear (unbranched) polysaccharides derived from brown seaweeds and some bacteria. Despite having only two monomers, i.e. β-d-mannuronate (M) and its C5 epimer α-l-guluronate (G), their blockwise arrangement in oligomannuronate (..MMM..), oligoguluronate (..GGG..), and polyalternating (..MGMG..) blocks endows it with a rather complex interaction pattern with specific counterions and salts. Classic polyelectrolyte theories well apply to alginate as polyanion in the interaction with monovalent and non-gelling divalent cations. The use of divalent gelling ions, such as Ca2+, Ba2+ or Sr2+, provides thermostable homogeneous or heterogeneous hydrogels where the block composition affects both macroscopic and microscopic properties. The mechanism of alginate gelation is still explained in terms of the original egg-box model, although over the years some novel insights have been proposed. In this review we summarize several decades of research related to structure-functionships in alginates in the presence of non-gelling and gelling cations and present some novel applications in the field of self-assembling nanoparticles and use of radionuclides.

Ions-Induced Alginate Gelation According to Elemental Analysis and a Combinatorial Approach

This study considers the potential of elemental analysis of polysaccharide ionotropic gels in elucidating the junction zones for different divalent cations. The developed algorithm ensures the correct separation of contributions from physically adsorbed and structure-forming ionic compounds, with the obtained results scaled to alginate C12 block. Possible versions of chain association into dimers and their subsequent integration into flat junction zones were analyzed within the framework of the "egg-box" model. The application of combinatorial analysis made it possible to derive theoretical relations to find the probability of various types of egg-box cell occurrences for alginate chains with arbitrary monomeric units ratio μ = M/G, which makes it possible to compare experimental data for alginates of different origins. Based on literature data and obtained chemical formulas, the possible correspondence of concrete biopolymer cells to those most preferable for filling by alkaline earth cations was established. The identified features of elemental composition suggest the formation of composite hydrated complexes with the participation of transition metal cations. The possibility of quantitatively assessing ordered secondary structures formed due to the physical sorption of ions and molecules from environment, correlating with the sorption capabilities of Me2+ alginate, was established.

Intratumoral thermo-chemotherapeutic alginate hydrogel containing doxorubicin loaded PLGA nanoparticle and heating agent

Chemotherapy has been widely used to treat cancer; however, the non-specific systemic toxicity of chemotherapeutic agents has always been an issue. Local injection treatment is a strategy used to reduce the undesired adverse effects of chemotherapeutic drugs. In addition, chemotherapeutic agents combined with thermotherapy are effective in further enhancing therapeutic potency. In the present study, we prepared an injectable hydrogel, namely, doxorubicin (DOX)-loaded poly (lactic-co-glycolic acid) (PLGA) nanoparticle (DPN) and magnetite nanoparticle (MNP) embedded in alginate hydrogel (DPN/MNP-HG), where DPN and MNP were the chemotherapeutic and heating agents, respectively, for intratumoral thermo-chemotherapy. Injectable DPN/MNP-HG, which possesses solid-like elastic properties, was conveniently prepared via ionic cross-linking at room-temperature. When exposed to an alternating magnetic field (AMF), DPN/MNP-HG exhibited controllable heat generation with a reversible temperature-rise profile. Regarding the kinetics of DOX release, both with and without AMF, DPN/MNP-HG exhibited a slow initial burst and sustained release profile. In cytotoxicity studies and subcutaneous mouse cancer models, successful thermo-chemotherapy with DPN/MNP-HG resulted in significantly lower cell viability and increased tumor-growth suppression; mice also exhibited good tolerance to injected DPN/MNP-HG both with(+) and without AMF application. In conclusion, the proposed thermo-chemotherapeutic DPN/MNP-HG for local intratumoral injection is a promising formulation for cancer treatment.

Thermoreversible Gelation with Supramolecularly Polymerized Cross-Link Junctions

Structure and reversibility of cross-link junctions play pivotal roles in determining the nature of thermoreversible gelation and dynamic mechanical properties of the produced polymer networks. We attempt to theoretically explore new types of sol-gel transitions with mechanical sharpness by allowing cross-links to grow without upper bound. We consider thermoreversible gelation of the primary molecules R{Af} carrying the number f of low molecular weight functional groups (gelators) A. Gelators A are assumed to form supramolecular assemblies. Some examples are: telechelic polymers (f=2) carrying π-π stacking benzene derivatives at their both ends, and trifunctional star molecules (f=3) bearing multiple hydrogen-bonding gelators. The sol-gel transition of the primary molecules becomes sharper with the cooperativity parameter of the stepwise linear growth of the cross-links. There is a polymerization transition (crossover without singularity) of the junctions in the postgel region after the gel point is passed. If the gelator A tends to form supramolecular rings competitively with linear chains, there is another phase transition in the deep postgel region where the average molecular weight of the rings becomes infinite (Bose-Einstein condensation of rings). As a typical example of binary cross-links where gelators A and B form mixed junctions, we specifically consider metal-coordinated binding of ligands A by metal ions B. Two types of multi-nuclear supramolecular complexes are studied: (i) linear stacking (ladder) of the sandwich A2B units, and (ii) linear train of egg-box A4B units. To find the strategy towards experimental realization of supramolecular cross-links, the average molecular weight, the gel fraction, the average length of the cross-link junctions are numerically calculated for all of these models as functions of the functionality f, the concentration of the solute molecules, and the temperature. Potential candidates for the realization of these new types of thermoreversible gelation are discussed.

Tailoring the Swelling-Shrinkable Behavior of Hydrogels for Biomedical Applications

Hydrogels with tailor-made swelling-shrinkable properties have aroused considerable interest in numerous biomedical domains. For example, as swelling is a key issue for blood and wound extrudates absorption, the transference of nutrients and metabolites, as well as drug diffusion and release, hydrogels with high swelling capacity have been widely applicated in full-thickness skin wound healing and tissue regeneration, and drug delivery. Nevertheless, in the fields of tissue adhesives and internal soft-tissue wound healing, and bioelectronics, non-swelling hydrogels play very important functions owing to their stable macroscopic dimension and physical performance in physiological environment. Moreover, the negative swelling behavior (i.e., shrinkage) of hydrogels can be exploited to drive noninvasive wound closure, and achieve resolution enhancement of hydrogel scaffolds. In addition, it can help push out the entrapped drugs, thus promote drug release. However, there still has not been a general review of the constructions and biomedical applications of hydrogels from the viewpoint of swelling-shrinkable properties. Therefore, this review summarizes the tactics employed so far in tailoring the swelling-shrinkable properties of hydrogels and their biomedical applications. And a relatively comprehensive understanding of the current progress and future challenge of the hydrogels with different swelling-shrinkable features is provided for potential clinical translations.

Highly flame-retardant materials of different divalent metal ions alginate/silver phosphate: Synthesis, characterizations, and synergistic phosphorus-polymetallic effects

Three kinds of divalent metal ions (Ca2+, Cu2+, Zn2+) alginate/silver phosphate (MAlg/Ag3PO4) hybrid materials were prepared via an in-situ method, and the composites were characterized by X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and Fourier transform infrared spectrum (FTIR). To investigate their flame-retardant properties and phosphorus-polymetallic flame-retardant effects, the combustion behavior and flammability of the composites were assessed by using the thermogravimetric analysis (TGA), limiting oxygen index (LOI) and micro-calorimeter tests (MCC). The results show that the three composites were thermally stable, among which the LOI of CaAlg/Ag3PO4, CuAlg/Ag3PO4 and ZnAlg/Ag3PO4 were 62.6 %, 46.5 % and 79.8 %, respectively, which were much higher than the prescribed flame retardants which was 27 %. According to the TGA, the thermal stability was ZnAlg/Ag3PO4 > CaAlg/Ag3PO4 > CuAlg/Ag3PO4. The heat release capacity (HRC) of the above three materials was 49 J/(g·K), 69 J/(g·K), 41 J/(g·K), respectively, and the fire safety performance was also in the same order as the thermal stability. By using the thermogravimetric analysis coupled with Fourier transform infrared analysis (TG-FTIR) and pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS), the flame retarding mechanism of MAlg/Ag3PO4 and the synergistic effect of Ag3PO4 and divalent metal ions were proposed based on the experimental data.

Experimental Advances in the Real-Time Recording of Cross-Linking Alginate In Situ Gelation: A Review

Alginate-based hydrogels are promising smart materials widely employed in the food, bioengineering, and energy sectors. The development and optimization of their production require a thorough knowledge of gelation. In recent years, advanced experimental procedures have been developed for real-time cross-linking alginate reaction monitoring. Novel methods, such as customized rheometric setups, enable the recording of mechanical properties and morphological changes during hydrogel formation. These innovative techniques provide important insights into the gelation stages, the reaction rate, the diffusion of cross-linker to polymer chains, and the homogeneity of the gelling structures. Based on real-time experimental data, kinetic models are developed to enhance comprehension of the reaction mechanism and, eventually, to predict the gelation progress. The aim is to enable better control of the characterization of both the complex gelation and the propagated structures. This review aspires to present a comprehensive overview and evaluation of the breakthrough innovations of the real-time in situ recording of cross-linking alginate hydrogels and bead formation. A detailed analysis of the pioneering experimental developments provides a deep comprehension of the alginate gelation, including the parameters controlling the reaction.

Diversity of Bioinspired Hydrogels: From Structure to Applications

Hydrogels are three-dimensional networks with a variety of structures and functions that have a remarkable ability to absorb huge amounts of water or biological fluids. They can incorporate active compounds and release them in a controlled manner. Hydrogels can also be designed to be sensitive to external stimuli: temperature, pH, ionic strength, electrical or magnetic stimuli, specific molecules, etc. Alternative methods for the development of various hydrogels have been outlined in the literature over time. Some hydrogels are toxic and therefore are avoided when obtaining biomaterials, pharmaceuticals, or therapeutic products. Nature is a permanent source of inspiration for new structures and new functionalities of more and more competitive materials. Natural compounds present a series of physico-chemical and biological characteristics suitable for biomaterials, such as biocompatibility, antimicrobial properties, biodegradability, and nontoxicity. Thus, they can generate microenvironments comparable to the intracellular or extracellular matrices in the human body. This paper discusses the main advantages of the presence of biomolecules (polysaccharides, proteins, and polypeptides) in hydrogels. Structural aspects induced by natural compounds and their specific properties are emphasized. The most suitable applications will be highlighted, including drug delivery, self-healing materials for regenerative medicine, cell culture, wound dressings, 3D bioprinting, foods, etc.

Adsorption of lead ions by activated carbon doped sodium alginate/sodium polyacrylate hydrogel beads and their in-situ recycle as sustainable photocatalysts

In this study, sodium alginate (SA), sodium polyacrylate (PAAS) and powdered activated carbon (PAC) were cross-linked by calcium ions [(Ca(II)] to form SA/PAAS/PAC (SPP) hydrogel beads. The hydrogel-lead sulfide (SPP-PbS) nanocomposites were successfully synthesized by in-situ vulcanization after the lead ions [(Pb(II)] adsorption. SPP showed an optimal swelling ratio (600% at the pH value of 5.0) and superior thermal stability (206 °C of heat-resistance index). The adsorption data of Pb(II) was compatible with the Langmuir model, and the maximum adsorption capacity of SPP was 391.65 mg/g after optimizing the mass ratio of SA to PAAS (3:1). The addition of PAC not only enhanced the adsorption capacity and stability, but also promoted photodegradation. The significant dispersive capacity of PAC and PAAS resulted in PbS nanoparticles with particle sizes of around 20 nm. SPP-PbS showed good photocatalysis and reusability. The degradation rate of RhB (200 mL, 10 mg/L) was 94% within 2 h and maintained above 80% after 5 cycles. The treatment efficiency of SPP was more than 80% in actual surface water. The results of quenching experiments and electron spin resonance (ESR) experiments revealed that the superoxide radicals (O₂^-) and holes (h⁺) were the main active species in the photocatalytic process.

A Nanoparticle Ink Allowing the High Precision Visualization of Tissue Engineered Scaffolds by MRI

Hydrogels are widely used as cell scaffolds in several biomedical applications. Once implanted in vivo, cell scaffolds must often be visualized, and monitored overtime. However, cell scaffolds appear poorly contrasted in most biomedical imaging modalities such as magnetic resonance imaging (MRI). MRI is the imaging technique of choice for high-resolution visualization of low-density, water-rich tissues. Attempts to enhance hydrogel contrast in MRI are performed with "negative" contrast agents that produce several image artifacts impeding the delineation of the implant's contours. In this study, a magnetic ink based on ultra-small iron oxide nanoparticles (USPIONs; <5 nm diameter cores) is developed and integrated into biocompatible alginate hydrogel used in cell scaffolding applications. Relaxometric properties of the magnetic hydrogel are measured, as well as biocompatibility and MR-visibility (T₁ -weighted mode; in vitro and in vivo). A 2-week MR follow-up study is performed in the mouse model, demonstrating no image artifacts, and the retention of "positive" contrast overtime, which allows very precise delineation of tissue grafts with MRI. Finally, a 3D-contouring procedure developed to facilitate graft delineation and geometrical conformity assessment is applied on an inverted template alginate pore network. This proof-of-concept establishes the possibility to reveal precisely engineered hydrogel structures using this USPIONs ink high-visibility approach.

Doubling growth of egg-box structure during Calcium-mediated molecular assembly of alginate

Ca²⁺-mediated molecular assembly of alginate underpins its wide range of applications in foods, pharmaceutics, biomedicines, tissue engineering and environmental treatments. The mode of growth of egg-box structure of alginate in the presence of Ca²⁺ is a long-standing fundamental problem to be concluded. In this work, we investigate the Ca-induced structural evolution of alginate in dilute solution using atomic force microscopy and dilute solution viscometry. It is demonstrated that the structural evolution follows the three critical steps of monocomplexation, dimerization and multimerization, upon binding with Ca²⁺. Interestingly, the alginate single chains grow into dimers and multimers via a doubling mode, i.e., successive emerging of dimer, tetramer, octamer, and hexadecamer. Compared with lower guluronate (G) alginate, higher G alginate exhibits a more pronounced multimerization process occurring at a lower ratio of Ca/G. A mechanistic model depicting the evolution of egg-box structure is proposed. The results would add new knowledge to the current egg-box model regarding the molecular assembly and gelation of an important biopolymer alginate, and provide fundamental basis for molecular engineering of alginate for more advanced applications.

Ion-Induced Polysaccharide Gelation: Peculiarities of Alginate Egg-Box Association with Different Divalent Cations

Structural aspects of polysaccharide hydrogels based on sodium alginate and divalent cations Ba²⁺, Ca²⁺, Sr²⁺, Cu²⁺, Zn²⁺, Ni²⁺ and Mn²⁺ was studied using data on hydrogel elemental composition and combinatorial analysis of the primary structure of alginate chains. It was shown that the elemental composition of hydrogels in the form of freezing dried microspheres gives information on the structure of junction zones in the polysaccharide hydrogel network, the degree of filling of egg-box cells by cations, the type and magnitude of the interaction of cations with alginate chains, the most preferred types of alginate egg-box cells for cation binding and the nature of alginate dimers binding in junction zones. It was ascertained that metal-alginate complexes have more complicated organization than was previously desired. It was revealed that in metal-alginate hydrogels, the number of cations of various metals per C12 block may be less than the limiting theoretical value equal to 1 for completely filled cells. In the case of alkaline earth metals and zinc, this number is equal to 0.3 for calcium, 0.6 for barium and zinc and 0.65-0.7 for strontium. We have determined that in the presence of transition metals copper, nickel and manganese, a structure similar to an egg-box is formed with completely filled cells. It was determined that in nickel-alginate and copper-alginate microspheres, the cross-linking of alginate chains and formation of ordered egg-box structures with completely filled cells are carried out by hydrated metal complexes with complicated composition. It was found that an additional characteristic of complex formation with manganese cations is the partial destruction of alginate chains. It has been established that the existence of unequal binding sites of metal ions with alginate chains can lead to the appearance of ordered secondary structures due to the physical sorption of metal ions and their compounds from the environment. It was shown that hydrogels based on calcium alginate are most promising for absorbent engineering in environmental and other modern technologies.

Recent Progress in Microencapsulation of Active Peptides-Wall Material, Preparation, and Application: A Review

Being a natural active substance with a wide variety of sources, easy access, significant curative effect, and high safety, active peptides have gradually become one of the new research directions in food, medicine, agriculture, and other fields in recent years. The technology associated with active peptides is constantly evolving. There are obvious difficulties in the preservation, delivery, and slow release of exposed peptides. Microencapsulation technology can effectively solve these difficulties and improve the utilization rate of active peptides. In this paper, the commonly used materials for embedding active peptides (natural polymer materials, modified polymer materials, and synthetic polymer materials) and embedding technologies are reviewed, with emphasis on four new technologies (microfluidics, microjets, layer-by-layer self-assembly, and yeast cells). Compared with natural materials, modified materials and synthetic polymer materials show higher embedding rates and mechanical strength. The new technology improves the preparation efficiency and embedding rate of microencapsulated peptides and makes the microencapsulated particle size tend to be controllable. In addition, the current application of peptide microcapsules in different fields was also introduced. Selecting active peptides with different functions, using appropriate materials and efficient preparation technology to achieve targeted delivery and slow release of active peptides in the application system, will become the focus of future research.

Hydrogels based on methylated-alginates as a platform to investigate the effect of material properties on cell activity. The role of material compliance

Alginate-based hydrogels with tunable mechanical properties are developed by chemical methylation of the polysaccharide backbone, which was performed either in homogeneous phase (in solution) or in heterogeneous phase (on hydrogels). Nuclear Magnetic Resonance (NMR) and Size Exclusion Chromatography (SEC-MALS) analyses of methylated alginates allow to identify the presence and location of methyl groups on the polysaccharide, and to investigate the influence of methylation on the stiffness of the polymer chains. The methylated polysaccharides are employed for the manufacturing of calcium-reticulated hydrogels for cell growth in 3D. The rheological characterization shows that the shear modulus of hydrogels is dependent on the amount of cross-linker used. Methylated alginates represent a platform to explore the effect of mechanical properties on cell activity. As an example, the effect of compliance is investigated using hydrogels displaying similar shear modulus. An osteosarcoma cell line (MG-63) was encapsulated in the alginate hydrogels and the effect of material compliance on cell proliferation and localization of YAP/TAZ protein complex is investigated by flow cytometry and immunohistochemistry, respectively. The results point out that an increase of material compliance leads to an increase of the proliferative rate of cells and correlates with the translocation of YAP/TAZ inside the cell nucleus.

Novel Electrospun Polycaprolactone/Calcium Alginate Scaffolds for Skin Tissue Engineering

After decades of research, fully functional skin regeneration is still a challenge. Skin is a multilayered complex organ exhibiting a cascading healing process affected by various mechanisms. Specifically, nutrients, oxygen, and biochemical signals can lead to specific cell behavior, ultimately conducive to the formation of high-quality tissue. This biomolecular exchange can be tuned through scaffold engineering, one of the leading fields in skin substitutes and equivalents. The principal objective of this investigation was the design, fabrication, and evaluation of a new class of three-dimensional fibrous scaffolds consisting of poly(ε-caprolactone) (PCL)/calcium alginate (CA), with the goal to induce keratinocyte differentiation through the action of calcium leaching. Scaffolds fabricated by electrospinning using a PCL/sodium alginate solution were treated by immersion in a calcium chloride solution to replace alginate-linked sodium ions by calcium ions. This treatment not only provided ion replacement, but also induced fiber crosslinking. The scaffold morphology was examined by scanning electron microscopy and systematically assessed by measurements of the pore size and the diameter, alignment, and crosslinking of the fibers. The hydrophilicity of the scaffolds was quantified by contact angle measurements and was correlated to the augmentation of cell attachment in the presence of CA. The in vitro performance of the scaffolds was investigated by seeding and staining fibroblasts and keratinocytes and using differentiation markers to detect the evolution of basal, spinous, and granular keratinocytes. The results of this study illuminate the potential of the PCL/CA scaffolds for tissue engineering and suggest that calcium leaching out from the scaffolds might have contributed to the development of a desirable biological environment for the attachment, proliferation, and differentiation of the main skin cells (i.e., fibroblasts and keratinocytes).

Recovery of structural extracellular polymeric substances (sEPS) from aerobic granular sludge: Insights on biopolymers characterization and hydrogel properties for potential applications

Nowadays, wastewater treatment plants (WWTPs) are transforming into water resource recovery facilities (WRRFs) where the resource recovery from waste streams is pivotal. Aerobic granular sludge (AGS) is a novel technology applied for wastewater treatment. Extracellular polymeric substances (EPS) secreted by microorganisms promote the aggregation of bacterial cells into AGS and the structural fraction of EPS (sEPS) is responsible for the mechanical properties of AGS. sEPS can be extracted and recovered from waste AGS by physico-chemical methods and its characterization is to date of relevant concern to understand the properties in the perspective of potential applications. This study reports on: characterization of sEPS extracted and recovered from AGS; - formation and characterization of sEPS-based hydrogels. Briefly, sEPS were extracted by a thermo-alkaline process followed by an acidic precipitation. sEPS-based hydrogels were formed by a cross-linking process with a 2.5% w/w CaCl₂ solution. The following key-findings can be drawn: i) hydrogels can be formed starting from 1% w/w sEPS on, by diffusion of Ca²⁺ into sEPS network; ii) the Ca/C molar ratio of hydrogels decreased with increasing concentration of sEPS from 1 to 10% w/w; iii) the thermogravimetric and spectroscopic behaviours of sEPS show that the cross-linking reaction mainly involves the polysaccharidic fraction of biopolymers; iv) water-holding capacity up to 99 gH₂O/g_sEPS was registered for 1% w/w sEPS-based hydrogels, suggesting applications in several industrial sectors (i.e. chemical, paper, textile, agronomic, etc.); v) rheological results highlighted a solid-like behaviour (G'≫G") of sEPS-based hydrogels. The power-law fitting of G' vs. sEPS concentration suggests that the expansion of the sEPS network during cross-linking occurs through a percolative mechanism involving the initial formation of sEPS oligomers clusters followed by their interconnection towards the formation of 3D network. These findings provide additional information about the mechanisms of sEPS-based hydrogel formation and reveal the peculiar physico-chemical characteristics of sEPS which nowadays are increasingly gaining interest in the context of resource recovery.

Comparative Insights into the Fundamental Steps Underlying Gelation of Plant and Algal Ionic Polysaccharides: Pectate and Alginate

Pectate and alginate are among the most important biopolymers able to give rise to ionotropic gelation upon the addition of di- or multivalent counterions. The two ionic polysaccharides exhibit several common aspects of the gelation mechanism with calcium ions, the physiologically and commercially most relevant counterion type. The first one pertains to the role that specific Ca²⁺/polyion interactions play in the establishment of the ion-mediated chain/chain cross-links. Such interactions include both a specific affinity of the territorially condensed Ca²⁺ counterions for the polyuronate(s) and the formation of long-lasting chemical bonding (inner ion-sphere complex) of specific interchain sites accompanied by high conformational ordering. As to the first mechanism, it is dominated by the strong desolvation of the interacting ionic species, with concomitant positive variations in both enthalpy and entropy, the contribution of the latter prevailing over the former due to the favorable liberation of a very large number of water molecules of hydration. Both dilatometric and microcalorimetric data point to the higher affinity of Ca²⁺ for pectate than for alginate. The selective accumulation of calcium ions close to the polyanion(s) favors the onset of the second-chemical bonding-mode, which is associated with charge neutralization at the bonding site. This mode coincides with the largely accepted "egg-box" model for the calcium-mediated interchain junction of pectate and alginate. A new approach was devised for the calculation of the fraction of chemically bound divalent ions; it was based on the available circular dichroism data (further supported by scattering and viscosity results) and successfully tested by comparison with an independently determined fraction in the case of pectate. In detail, the strong bonding mode manifests in two sequential bonding modes. The first one (at low concentrations of added Ca²⁺ ions) entails a cross-link in which only one calcium ions is bracketed in a "twisted" egg-box between two chains; upon further counterion addition, a series of nearest-neighboring "perfect" egg-box structures develops. Both dilatometric and microcalorimetric changes associated with the latter chemical bonding modes are quantitatively larger for pectate than for alginate; clearly the latter polyuronate suffers from the relevant presence of the weakly calcium-binding mannuronic acid repeating units. Light-scattering experiments provided a clear-cut demonstration of the intermolecular bonding of calcium ions from the very beginning of the linker addition.

Fabrication, Property and Application of Calcium Alginate Fiber: A Review

As a natural linear polysaccharide, alginate can be gelled into calcium alginate fiber and exploited for functional material applications. Owing to its high hygroscopicity, biocompatibility, nontoxicity and non-flammability, calcium alginate fiber has found a variety of potential applications. This article gives a comprehensive overview of research on calcium alginate fiber, starting from the fabrication technique of wet spinning and microfluidic spinning, followed by a detailed description of the moisture absorption ability, biocompatibility and intrinsic fire-resistant performance of calcium alginate fiber, and briefly introduces its corresponding applications in biomaterials, fire-retardant and other advanced materials that have been extensively studied over the past decade. This review assists in better design and preparation of the alginate bio-based fiber and puts forward new perspectives for further study on alginate fiber, which can benefit the future development of the booming eco-friendly marine biomass polysaccharide fiber.

Self-Stirring Microcatalysts: Large-Scale, High-Throughput, and Controllable Preparation and Application

Herein, we introduce a strategy to develop a kind of unprecedented microcatalyst, which owns self-stirring and catalytic performance based on pneumatic printing and magnetic field induction technology. A spindle-shaped microcatalyst based on metal-organic frameworks (MOFs) with a certain aspect ratio and size can be obtained by tuning the printing parameters and the intensity of the magnetic field. One nozzle can print 18 000 microcatalysts per hour, which provides a prerequisite for the realization of large-scale production in the industrial field. Furthermore, this strategy can be widely applied to a variety of other heterogeneous catalysts, such as mesoporous SiO₂, zeolite, metallic oxide, and so on. To demonstrate the superiority of the printed catalyst, the series of printed microcatalysts were evaluated by various catalytic reactions including liquid-phase hydrogenation, microdroplet dye-fading, and photocatalytic degradation in microreactor, all of which exhibited excellent catalytic performance.

Simulated gastrointestinal digestion of protein alginate complexes: effects of whey protein cross-linking and the composition and degradation of alginate

Alginate and whey protein are common additives in food production improving storage stability, texture and nutritional value. Alginate forms complexes with whey protein and inhibits proteolysis by pepsin and trypsin, but the influence of alginate protein complexation on digestion is poorly understood. This study shows that whey protein cross-linking by microbial transglutaminase dramatically decreased particle size (2-fold) and viscosity of alginate protein complexes. The INFOGEST in vitro simulated gastrointestinal digestion of whey protein was increased by cross-linking (16%) and suppressed by alginate, most pronounced with high mannuronic acid and least with high guluronic acid content. Sizes of alginate whey protein particles increased during gastric digestion, whereas for cross-linked whey protein complexes the size initially increased, but returned to their initial size at the end of gastric digestion. While alginate is not degraded by human enzymes, a few gut bacteria were recently found to encode lyases and other enzymes metabolizing alginate. Alginate lyase added to the intestinal phase enhanced digestion (9%) as controlled by alginate composition and enzyme specificity. Thus we provide evidence that use of hydrocolloids and processing of protein strongly influence digestion and should be considered when using food additives.

Topography and physical properties of carboxymethyl cellulose films assembled with calcium and gelatin at different temperature and humidity

Effects of the environmental temperature and relative humidity of drying conditions on the surface ultrastructure of carboxymethyl cellulose (CMC) films were investigated by atomic force microscopy. The mechanical and water vapor barrier properties of the films were also evaluated. The results showed that CMC molecules self-assembled into a uniform network at the solution of 5% calcium chloride. And continuous structure was formed of composite mixture with the CMC/gelatin ratio in 1:1. The CMC/Gel film forming solution was respectively dried at 2-8 °C, 23 °C, 50 °C and 23 °C with ventilation to obtain films. The size and numbers of holes on the films surface were affected by the temperature and relative humidity. Correspondingly, the mechanical properties and water vapor permeability were altered with the films structure. Moreover, the surface structure of the composite films was changed by the infiltration and delivery of water vapor when films were stored at 2-8 °C and -20 °C for days.

Magnetic responsive mesoporous alginate/β-cyclodextrin polymer beads enhance selectivity and adsorption of heavy metal ions

Mesoporous (~7-8 nm) biopolymer hydrogel beads (HNTs-FeNPs@Alg/β-CD) were synthesised via ionic polymerisation route to separate heavy metal ions. The adsorption capacity of HNTs-FeNPs@Alg/β-CD was higher than that of raw halloysite nano tubes (HNTs), iron nanoparticles (FeNPs), and bare alginate beads. FeNPs induce the magnetic properties of adsorbent and metal-based functional groups in and around the hydrogel beads. The mesoporous surface of the adsorbent permits access of heavy metal ions onto the polymer beads to interact with internal active sites and the mesoporous polymer network. Maximum adsorption capacities of lead (Pb), copper (Cu), cadmium (Cd), and nickel (Ni) were 21.09 mg/g, 15.54 mg/g, 2.47 mg/g, and 2.68 mg/g, respectively. HNTs-FeNPs@Alg/β-CD was able to adsorb heavy metals efficiently (75-99%) under environment-relevant concentrations (200 μg/L) from mixed metal contaminants. The adsorption and selectivity trends of heavy metals were Pb > Cu > Cd > Ni, despite electrostatic binding strength of Cd > Cu > Pb > Ni and covalent binding strength of Pb > Ni > Cu > Cd. It demonstrated that not only chemosorption but also physisorption acts as the sorption mechanism. The reduction in surface area, porosity, and pore volume of the expended adsorbent, along with sorption study results, confirmed that pore filling and intra-particle diffusion played a considerable role in removing heavy metals.

Atomic-scale interactions between quorum sensing autoinducer molecules and the mucoid P. aeruginosa exopolysaccharide matrix

Mucoid Pseudomonas aeruginosa is a prevalent cystic fibrosis (CF) lung coloniser whose chronicity is associated with the formation of cation cross-linked exopolysaccharide (EPS) matrices, which form a biofilm that acts as a diffusion barrier, sequestering cationic and neutral antimicrobials, and making it extremely resistant to pharmacological challenge. Biofilm chronicity and virulence of the colony is regulated by quorum sensing autoinducers (QSAIs), small signalling metabolites that pass between bacteria, through the biofilm matrix, regulating genetic responses on a population-wide scale. The nature of how these molecules interact with the EPS is poorly understood, despite the fact that they must pass through EPS matrix to reach neighbouring bacteria. Interactions at the atomic-scale between two QSAI molecules, C₄-HSL and PQS—both utilised by mucoid P. aeruginosa in the CF lung—and the EPS, have been studied for the first time using a combined molecular dynamics (MD) and density functional theory (DFT) approach. A large-scale, calcium cross-linked, multi-chain EPS molecular model was developed and MD used to sample modes of interaction between QSAI molecules and the EPS that occur at physiological equilibrium. The thermodynamic stability of the QSAI-EPS adducts were calculated using DFT. These simulations provide a thermodynamic rationale for the apparent free movement of C₄-HSL, highlight key molecular functionality responsible for EPS binding and, based on its significantly reduced mobility, suggest PQS as a viable target for quorum quenching.

Alginate: Enhancement Strategies for Advanced Applications

Alginate is an excellent biodegradable and renewable material that is already used for a broad range of industrial applications, including advanced fields, such as biomedicine and bioengineering, due to its excellent biodegradable and biocompatible properties. This biopolymer can be produced from brown algae or a microorganism culture. This review presents the principles, chemical structures, gelation properties, chemical interactions, production, sterilization, purification, types, and alginate-based hydrogels developed so far. We present all of the advanced strategies used to remarkably enhance this biopolymer's physicochemical and biological characteristics in various forms, such as injectable gels, fibers, films, hydrogels, and scaffolds. Thus, we present here all of the material engineering enhancement approaches achieved so far in this biopolymer in terms of mechanical reinforcement, thermal and electrical performance, wettability, water sorption and diffusion, antimicrobial activity, in vivo and in vitro biological behavior, including toxicity, cell adhesion, proliferation, and differentiation, immunological response, biodegradation, porosity, and its use as scaffolds for tissue engineering applications. These improvements to overcome the drawbacks of the alginate biopolymer could exponentially increase the significant number of alginate applications that go from the paper industry to the bioprinting of organs.

Fluorescence microscope observation of the structure of a calcium alginate hydrogel

Calcium alginate hydrogels are used in a wide range of applications in the food, medical, pharmaceutical, and cosmetic industries. I have studied a calcium alginate hydrogel as an ultrasound phantom material. This hydrogel is formed using sodium alginate, calcium sulfate dihydrate, trisodium phosphate 12-hydrate, glycerol, and water, and mimics the ultrasound properties of human soft tissue. In this study, the structure of the calcium alginate hydrogel was observed with a fluorescence microscope after staining with the calcium indicator calcein. Two types of hydrogel structures, tape-like and thread-like, were observed by this method. The thread-like structures were rare in the hydrogel, which made them more difficult to find than the tape-like structures. These structures were several micrometers in diameter and longer than the tape-like structures, which were several micrometers to several tens of micrometers wide. The thread-like structures spread out in three dimensions, and existed singly or in aggregates. The outer shape of the aggregated thread-like structures resembled the shape of the tape-like structures, which suggested that the tape-like structures were made up of thread-like structures. The tape-like and thread-like structures are thought to contribute to retention of water, which is the main component of a hydrogel, by surrounding it.

Recovery of Model Pharmaceutical Compounds from Water and Organic Solutions with Alginate-Based Composite Membranes

In this work, we combined the non-solvent induced phase separation (NIPS) and further cross-linking by cations towards the preparation of nanofiltration membranes based on sodium alginate, a biodegradable, natural polymer. Acetone, ethanol, toluene, and hexane were used as non-solvents, and cations of calcium, silver, and aluminum—for polymer cross-linking, respectively. Results showed the precipitation strength of non-solvent played a noticeable role in the membrane’s performance; for instance, the toluene permeability changed by four orders of magnitude with the decrease of precipitation strength of the non-solvent: acetone (P_toluene = 0.1 kg∙m⁻²∙h⁻¹∙bar⁻¹) < ethanol (3 kg∙m⁻²∙h⁻¹∙bar⁻¹) < hexane (41 kg∙m⁻²∙h⁻¹∙bar⁻¹) < toluene (415 kg∙m⁻²∙h⁻¹∙bar⁻¹). It was shown that simultaneous precipitation and crosslinking in aqueous solutions AlCl₃ or AgNO₃ must be used in the preparation of alginate membranes for the highly selective recovery of pharmaceutical compounds from organic media. These membranes show rejection R = 90–93% of substances with MW = 626 g/mol and ethanol permeability P_EtOH = 1.5–2.5 kg∙m⁻²∙h⁻¹∙bar⁻¹. For the highly selective recovery of pharmaceutical compounds from water, the method of obtaining membranes must be changed. Precipitation in toluene and then crosslinking in aqueous solutions of AlCl₃ or AgNO₃ must be used sequentially instead of simultaneous precipitation and crosslinking in aqueous solutions of the same inorganic salts. The permeability of such membranes varied from 0.44 to 7.8 kg∙m⁻²∙h⁻¹∙bar⁻¹ depending on the crosslinking cation in the alginate. The rejection of model substances with MW 350 and 626 g/mol were on the level of 99%. Alginate membranes can be used to solve separation problems in the pharmaceutical field, for example, to isolate antibiotics from their extractants and remove the same antibiotics from aqueous pharmaceutical waste to prevent their accumulation in the environment and the emergence of resistant genes and bacteria.