Biocompatible Shaped Particles from Dried Multilayer Polymer Capsules

Effect of surface functionalization and loading on the mechanical properties of soft polymeric nanoparticles prepared by nano-emulsion templating

Drug and gene delivery systems based on polymeric nanoparticles offer a greater efficacy and a reduced toxicity compared to traditional formulations. Recent studies have evidenced that their internalization, biodistribution and efficacy can be affected, among other factors, by their mechanical properties. Here, we analyze by means of Atomic Force Microscopy force spectroscopy how composition, surface functionalization and loading affect the mechanics of nanoparticles. For this purpose, nanoparticles made of Poly(lactic-co-glycolic) (PLGA) and Ethyl cellulose (EC) with different functionalizations and loading were prepared by nano-emulsion templating using the Phase Inversion Composition method (PIC) to form the nano-emulsions. A multiparametric nanomechanical study involving the determination of the Young's modulus, maximum deformation and breakthrough force was carried out. The obtained results showed that composition, surface functionalization and loading affect the nanomechanical properties in a different way, thus requiring, in general, to consider the overall mechanical properties after the addition of a functionalization or loading. A graphical representation method has been proposed enabling to easily identify mechanically equivalent formulations, which is expected to be useful in the development of soft polymeric nanoparticles for pre-clinical and clinical use.

A decade of developing applications exploiting the properties of polyelectrolyte multilayer capsules

Transferring the layer-by-layer (LbL) coating approach from planar surfaces to spherical templates and subsequently dissolving these templates leads to the fabrication of polyelectrolyte multilayer capsules. The versatility of the coatings of capsules and their flexibility upon bringing in virtually any material into the coatings has quickly drawn substantial attention. Here, we provide an overview of the main developments in this field, highlighting the trends in the last decade. In the beginning, various methods of encapsulation and release are discussed followed by a broad range of applications, which were developed and explored. We also outline the current trends, where the range of applications is continuing to grow, including addition of whole new and different application areas.

Preparation of Surface-Supported Polylactide Spherical-Cap Particles

Biodegradable polymer particles are of considerable importance due to their multiple applications in medical diagnostics and therapy. Spherical-cap particles have been prepared in a very general and simple method by melting a thin polymer film supported on a solid substrate that is in contact with a hydrophilic solvent. The melted polymer forms droplets which transform into solid particles attached to the surface after cooling down the sample. This approach has been demonstrated for polylactide adlayers on glass, which, when melted in glycerol, produce an array of polymer particles supported on the surface. The size of the particles depends on the experimental conditions and ranges from tens of nanometers to several micrometers. The particles can be employed to incorporate guest species, for example, drug molecules or inorganic nanoparticles. This has been confirmed herein through entrapment of an anticancer drug (doxorubicin) and radiogold (Au-198) nanoparticles. The resulting structures have been examined using a number of complementary physicochemical techniques including scanning and transmission electron microscopy, atomic force and optical microscopy as well as Raman and fluorescence spectroscopy.

Self-assembled hydrogel nanocube for stimuli responsive drug delivery and tumor ablation by phototherapy against breast cancer

The shape and responsiveness of nanoengineered delivery carriers are crucial characteristics for the rapid and efficient delivery of therapeutics. We report on a novel type of micrometer-sized hydrogel particles of controlled shape with dual pH and redox sensitivity for intracellular delivery of anticancer drugs and phototherapy. The cubical HA-DOP-CS-PEG networks with disulfide links are obtained by cross-linking HA-DOP-CS-PEG with cystamine. The pH-triggered hydrogel swelling/shrinkage was not only affords effective doxorubicin release. It also actively provides the endosomal/lysosomal escape, redox-triggered drug release. The hydrogels degrade rapidly to low molecular weight chains in the presence of the typical intracellular concentration of glutathione. Drug-loaded cube particles found to be 12% more cytotoxic. ICG and DOX-loaded hydrogel cubes demonstrate 90% cytotoxicity when incubated with MCF-7 cancer cells for 24 and 48 h, respectively. This approach integrates the advantages of pH sensitivity, enzymatic degradation, and shape-regulated internalization for novel types of "intelligent" three-dimensional networks with programmable behavior for controlled delivery of therapeutics.

Structure-function relationships in polymeric multilayer capsules designed for cancer drug delivery

The targeted delivery of cancer drugs to tumor-specific molecular targets represents a major challenge in modern personalized cancer medicine. Engineering of micron and submicron polymeric multilayer capsules allows the obtaining of multifunctional theranostic systems serving as controllable stimulus-responsive tools with a high clinical potential to be used in cancer therapy and detection. The functionalities of such theranostic systems are determined by the design and structural properties of the capsules. This review (1) describes the current issues in designing cancer cell-targeting polymeric multilayer capsules, (2) analyzes the effects of the interactions of the capsules with the cellular and molecular constituents of biological fluids, and (3) presents the key structural parameters determining the effectiveness of capsule targeting. The influence of the morphological and physicochemical parameters and the origin of the structural components and surface ligands on the functional activity of polymeric multilayer capsules at the molecular, cellular, and whole-body levels are summarized. The basic structural and functional principles determining the future trends of theranostic capsule development are established and discussed.

Dissipative particle dynamics simulation study on ATRP-brush modification of variably shaped surfaces and biopolymer adsorption

We present a dissipative particle dynamics (DPD) simulation study on the surface modification of initiator embedded microparticles (MPs) of different shapes via atom transfer radical polymerization (ATRP) brush growth. The surface-initiated ATRP-brush growth leads to the formation of a more globular MP shape. We perform the comparative analysis of ATRP-brush growth on three different forms of particle surfaces: cup surface, spherical surface, and flat surface (rectangular/disk-shaped). First, we establish the chemical kinetics of the brush growth: the monomer conversion and the reaction rates. Next, we discuss the structural changes (shape-modification) of brush-modified surfaces by computing the radial distribution function, spatial density distribution, radius of gyration, hydrodynamic radius, and shape factor. The polymer brush-modified particles are well known as the carrier materials for enzyme immobilization. Finally, we study the biopolymer adsorption on ATRP-brush modified particles in a compatible solution. In particular, we explore the effect of ATRP-brush length, biopolymer chain length, and concentration on the adsorption process. Our results illustrate the enhanced biopolymer adsorption with increased brush length, initiator concentration, and biopolymer concentration. Most importantly, when adsorption reaches saturation, the flat surface loads more biopolymers than the other two surfaces. The experimental results verified the same, considering the disk-shaped flat surface particles, cup-shaped particles, and spherical particles.

Microfluidic Synthesis and Analysis of Bioinspired Structures Based on CaCO3 for Potential Applications as Drug Delivery Carriers

Naturally inspired biomaterials such as calcium carbonate, produced in biological systems under specific conditions, exhibit superior properties that are difficult to reproduce in a laboratory. The emergence of microfluidic technologies provides an effective approach for the synthesis of such materials, which increases the interest of researchers in the creation and investigation of crystallization processes. Besides accurate tuning of the synthesis parameters, microfluidic technologies also enable an analysis of the process in situ with a range of methods. Understanding the mechanisms behind the microfluidic biomineralization processes could open a venue for new strategies in the development of advanced materials. In this review, we summarize recent advances in microfluidic synthesis and analysis of CaCO₃-based bioinspired nano- and microparticles as well as core-shell structures on its basis. Particular attention is given to the application of calcium carbonate particles for drug delivery.

Use of graphene-based materials as carriers of bioactive agents

Graphene possesses a large specific surface area, a high Young's modulus, high fracture strength, high electrical conductivity, and excellent optical performance. It has been widely studied for biomedical use since its first appearance in the literature. This article offers an overview of the latest advances in the design of graphene-based materials for delivery of bioactive agents. To enhance the translation of these carriers into practical use, the toxicity involved is needed to be examined in future research in more detail. In addition, guidelines for standardizing experimental conditions during the evaluation of the performance of graphene-based materials are required to be established so that candidates showing higher practical potential can be more effectively identified for further development. This can streamline the optimization and use of graphene-based materials in delivery applications.

Development of Mitomycin C-Loaded Nanoparticles Prepared Using the Micellar Assembly Driven by the Combined Effect of Hydrogen Bonding and π-π Stacking and Its Therapeutic Application in Bladder Cancer

Micelle is mainly used for drug delivery and is prepared from amphiphilic block copolymers. It can be formed into an obvious core-shell structure that can incorporate liposoluble drugs. However, micelles are not suitable for the encapsulation of water-soluble drugs, and it is also difficult to maintain stability in the systemic circulation. To solve these problems, a type of polymer material, Fmoc-Lys-PEG and Fmoc-Lys-PEG-RGD, was designed and synthesized. These copolymers could self-assemble into micelles driven by π-π stacking and the hydrophobic interaction of 9-fluorenylmethoxycarbony (Fmoc) and, at the same time, form a framework for a hydrogen-bonding environment in the core. Mitomycin C (MMC), as a water-soluble drug, can be encapsulated into micelles by hydrogen-bonding interactions. The interaction force between MMC and the polymers was analyzed by molecular docking simulation and Fourier transform infrared (FTIR). It was concluded that the optimal binding conformation can be obtained, and that the main force between the MMC and polymers is hydrogen bonding. Different types of MMC nanoparticles (NPs) were prepared and the physicochemical properties of them were systematically evaluated. The pharmacodynamics of the MMC NPs in vitro and in vivo were also studied. The results show that MMC NPs had a high uptake efficiency, could promote cell apoptosis, and had a strong inhibitory effect on cell proliferation. More importantly, the as-prepared NPs could effectively induce tumor cell apoptosis and inhibit tumor growth and metastasis in vivo.

Anisotropic Particles through Multilayer Assembly

The anisotropy in the shape of polymeric particles has been demonstrated to have many advantages over spherical particulates, including bio-mimetic behavior, shaped-directed flow, deformation, surface adhesion, targeting, motion, and permeability. The layer-by-layer (LbL) assembly is uniquely suited for synthesizing anisotropic particles as this method allows for simple and versatile replication of diverse colloid geometries with precise control over their chemical and physical properties. This review highlights recent progress in anisotropic particles of micrometer and nanometer sizes produced by a templated multilayer assembly of synthetic and biological macromolecules. Synthetic approaches to produce capsules and hydrogels utilizing anisotropic templates such as biological, polymeric, bulk hydrogel, inorganic colloids, and metal-organic framework crystals as sacrificial templates are overviewed. Structure-property relationships controlled by the anisotropy in particle shape and surface are discussed and compared with their spherical counterparts. Advances and challenges in controlling particle properties through varying shape anisotropy and surface asymmetry are outlined. The perspective applications of anisotropic colloids in biomedicine, including programmed behavior in the blood and tissues as artificial cells, nano-motors/sensors, and intelligent drug carriers are also discussed.

Multilayer Microcapsules with Shell-Chelated 89Zr for PET Imaging and Controlled Delivery

Radionuclide-functionalized drug delivery vehicles capable of being imaged via positron emission tomography (PET) are of increasing interest in the biomedical field as they can reveal the in vivo behavior of encapsulated therapeutics with high sensitivity. However, the majority of current PET-guided theranostic agents suffer from poor retention of radiometal over time, low drug loading capacities, and time-limited PET imaging capability. To overcome these challenges, we have developed hollow microcapsules with a thin (<100 nm) multilayer shell as advanced theranostic delivery systems for multiday PET tracking in vivo. The 3 μm capsules were fabricated via the aqueous multilayer assembly of a natural antioxidant, tannic acid (TA), and a poly(N-vinylpyrrolidone) (PVPON) copolymer containing monomer units functionalized with deferoxamine (DFO) to chelate the ⁸⁹Zr radionuclide, which has a half-life of 3.3 days. We have found using radiochromatography that (TA/PVPON-DFO)₆ capsules retained on average 17% more ⁸⁹Zr than their (TA/PVPON)₆ counterparts, which suggests that the covalent attachment of the DFO to PVPON provides stable ⁸⁹Zr chelation. In vivo PET imaging studies performed in mice demonstrated that excellent stability and imaging contrast were still present 7 days postinjection. Animal biodistribution analyses showed that capsules primarily accumulated in the spleen, liver, and lungs with negligible accumulation in the femur, with the latter confirming the stable binding of the radiotracer to the capsule walls. The application of therapeutic ultrasound (US) (60 s of 20 kHz US at 120 W cm^-2) to Zr-functionalized capsules could release the hydrophilic anticancer drug doxorubicin from the capsules in the therapeutic amounts. Polymeric capsules with the capability of extended in vivo PET-based tracking and US-induced drug release provide an advanced platform for development of precision-targeted therapeutic carriers and could aid in the development of more effective drug delivery systems.

Polyphenol-Mediated Assembly for Particle Engineering

Polyphenols are naturally occurring compounds that are ubiquitous in plants and display a spectrum of physical, chemical, and biological properties. For example, they are antioxidants, have therapeutic properties, absorb UV radiation, and complex with metal ions. Additionally, polyphenols display high adherence, which has been exploited for assembling nanostructured materials. We previously reviewed the assembly of different phenolic materials and their applications (Angew. Chem. Int. Ed. 2019, 58, 1904-1927); however, there is a need for a summary of the fundamental interactions that govern the assembly, stability, and function of polyphenol-based materials. A detailed understanding of interactions between polyphenols and various other building blocks will facilitate the rational design and assembly of advanced polyphenol particles for specific applications. This Account discusses how different interactions and bonding (i.e., hydrogen, π, hydrophobic, metal coordination, covalent, and electrostatic) can be leveraged to assemble and stabilize polyphenol-based particles for diverse applications. In polyphenol-mediated assembly strategies, the polyphenols typically exert more than one type of stabilizing attractive force. However, one interaction often dominates the assembly process and dictates the physicochemical behavior of the particles, which in turn influences potential applications. This Account is thus divided into sections that each focus on a key interaction with relevant examples of applications to highlight structure-function relationships. For example, metal coordination generally becomes weaker at lower pH, which makes it possible to engineer metal-phenolic materials with a pH-responsive disassembly profile suitable for drug delivery. Engineered particles, such as hollow capsules, mesoporous and core-shell particles, and self-assembled nanoparticles are some of the systems that are covered to highlight how polyphenols interact with other building blocks and therefore make up the major focus of this Account. Some of the applications of these materials exemplified in this Account include drug delivery, catalysis, environmental remediation, and forensics. Finally, a perspective is provided on the current challenges and trends in polyphenol-mediated particle assembly, and viable near-term strategies for further elucidating the interplay of various competing interactions in particle formation are discussed. This Account is also expected to serve as a reference to guide fundamental research and facilitate the rational design of polyphenol-based materials for diverse emerging applications.

Development of Copper Nanoclusters for In Vitro and In Vivo Theranostic Applications

Theranostics refers to the incorporation of therapeutic and diagnostic functions into one material system. An important class of nanomaterials exploited for theranostics is metal nanoclusters (NCs). In contrast to gold and silver NCs, copper is an essential trace element for humans. It can be more easily removed from the body. This, along with the low cost of copper that offers potential large-scale nanotechnology applications, means that copper NCs have attracted great interest in recent years. The latest advances in the design, synthesis, surface engineering, and applications of copper NCs in disease diagnosis, monitoring, and treatment are reviewed. Strategies to control and enhance the emission of copper NCs are considered. With this synopsis of the up-to-date development of copper NCs as theranostic agents, it is hoped that insights and directions for translating current advances from the laboratory to the clinic can be further advanced and accelerated.

Multicompartmental Mesoporous Silica/Polymer Nanostructured Hybrids: Design Capabilities by Integrating Linear and Star-Shaped Block Copolymers

Poly(2-vinyl pyridine)-b-poly(ethylene oxide) (P2VP-b-PEO) linear diblock copolymer and polystyrene-poly(ethylene oxide) (PS10PEO10) heteroarm star copolymer were used as building elements to prepare organic-inorganic hybrids. By using the layer-by-layer (LbL) methodology, these elements were integrated on mesoporous silica through non-covalent interactions, namely, ionic and H-bonding. For the latter, tannic acid (TA) was used as an intermediate layer. The deposition of the various layers was monitored by thermogravimetric analysis (TGA), electrophoretic measurements, and confocal microscopy. The final silica hybrid, bearing alternating P2VP-b-PEO and PS10PEO10 star layers was capable of carrying one hydrophilic and two hydrophobic chemical species in distinct compartments. These multicompartmental organic-inorganic hybrids could be used as nanostructured carriers for pH-responsive multiple drug delivery and potential theranostic applications.

Fabrication of topologically anisotropic microparticles and their surface modification with pH responsive polymer brush

This paper describes the fabrication of topologically anisotropic cup shaped polylactide (PLA)/poly[methyl methacrylate‑co‑2‑(2‑bromopropionyloxy) ethyl methacrylate] (poly(MMA-co-BEMA)) (75/25) composite particles of ~6 μm size using electrojetting technique. An attempt was made to understand the mechanism of cup shape formation from the miscible blend by electrojetting. Both the solution parameters and the processing conditions affected the particles' shape which can be varied from cup shaped to discoid type. Surface initiated atom transfer radical polymerization (ATRP) of stimuli responsive DMAEMA (2‑dimethylamino ethyl methacrylate) was subsequently carried out for 1 h onto the surface of cup shaped particles to observe pH responsiveness of the modified anisotropic particles. Interestingly, morphology of the cup shaped particles was changed to elongated cup which did show significant swelling under acidic pH (swelling ratio:~1.6) and enhanced dye adsorption at specific pH as observed by optical microscope and confocal laser scanning microscope implying that DMAEMA polymerization happened onto the surface of the composite microparticles. The Raman microscopy and FTIR spectra obtained from the particles after polymerization further confirmed the immobilization of pH responsive poly(DMAEMA) brushes onto the cup shaped particles which may potentially function as triggered/targeted drug delivery vehicles. Moreover, the brush modified cup shaped particles were found to be two times more efficient in adsorbing dye compared to disc shaped one indicating a clear advantage of using cup shaped particles over other shapes for immobilizing/adsorbing charged species e.g. sensitive biomolecules.

Controlled reversible buckling of polydopamine spherical microcapsules: revealing the hidden rich phenomena of post-buckling of spherical polymeric shells

Under external pressure compression, various kinds of artificial microcapsules can undergo buckling induced deformation and catastrophic rupturing failure, which needs to be understood for their diverse practical applications. For this, many theories and numerical simulations have recently emerged, leading to some intriguing but often debatable predictions and scaling laws. However, experimental testing of these predictions is very limited, due to challenges in realizing prescribed buckling pathways and in situ monitoring of the buckling procedure. Herein, we report the buckling behaviors of well-defined spherical polydopamine (PDA) capsules with tunable sizes and homogeneous nanoscale shells. Simple but controlled solvent evaporation was implemented inside a home-made optical chamber to induce buckling of PDA capsules by following a prescribed pathway toward targeted shapes that are only dictated by the inherent material properties of the capsules. In addition, the buckling speed was slowed down to the timescale of minutes, which can prevent buckling from being trapped at some metastable intermediate states as well as facilitating in situ optical monitoring of the whole buckling procedure in slow motion. In this way, several classic buckling behaviors were clearly observed, including the sudden appearance of spinodal-like dimples above critical pressures, transition of the indentation rim from the axisymmetric to polygonal shape, and evolution of multi-indented buckling into single indented buckling following Ostwald ripening. These observations are qualitatively comparable with recent predictions from numerical results. Furthermore, some novel buckling phenomena have been reported for the first time, which might stimulate further theories and numerical simulations.

Shape Recovery of Spherical Hydrogen-Bonded Multilayer Capsules after Osmotically Induced Deformation

The mechanical properties of microparticles intended for in vivo applications as drug delivery vehicles are among important parameters that influence their circulation in the blood and govern particle biodistribution. We report on the synthesis of soft but mechanically robust spherical capsules via a hydrogen-bonded multilayer assembly of (poly(N-vinylpyrrolidone), M_w = 10 000 g mol^-1) with (poly(methacrylic acid) M_w = 100 000 g mol^-1)) (PVPON/PMAA)_n in methanol using 4 μm nonporous silica microparticles as sacrificial templates, where n = 5 and 10 and represents the bilayer number. The mechanical properties of (PVPON/PMAA)_n spherical capsules were assessed using the osmotic pressure difference method and resulted in an elasticity modulus of 97 ± 8 MPa, which is in the range of Young's modulus for elastomeric networks. We also found that hydrogen-bonded (PVPON/PMAA)₁₀ capsules demonstrated almost complete recovery from a concave buckled inward shape induced by the osmotic pressure difference from the addition of polystyrene sulfonate (PSS) to the capsule solution to their initial spherical shape within 12 h after the PSS solution was rinsed off. The permeability measurements through the capsule shell using fluorescently labeled dextran molecular probes revealed that the average mesh size of the hydrogen-bonded network assembled in methanol is in the range of 3 to 9 nm and is not permeable to FITC-dextran with a molecular weight of >40 000 g mol^-1. Our study shows that physically cross-linked polyelectrolyte multilayer capsules are capable of withstanding large deformations, which is essential to the development of adaptable particles for controlled delivery.

Hybrids of Polymeric Capsules, Lipids, and Nanoparticles: Thermodynamics and Temperature Rise at the Nanoscale and Emerging Applications

The importance of thermodynamics does not need to be emphasized. Indeed, elevated temperature processes govern not only industrial scale production but also self-assembly, chemical reaction, interaction between molecules, etc. Not surprisingly, biological processes typically take place at a specific temperature. Here, we look at possibilities to raise the localized temperature by a laser around noble-metal nanoparticles incorporated into shells of layer-by-layer polyelectrolyte microcapsules-freely suspended delivery vehicles in an aqueous solution, developed in the Department of Interfaces, Max Planck Institute of Colloids and Interfaces, headed by Helmuth Möhwald. Understanding the mechanisms of localized temperature rise is essential, that is why we analyze the influence of incident intensity, nanoparticle size, their distribution and aggregation state, as well as thermodynamics at the nanoscale. This leads us to scrutinize "global" (used for thermal encapsulation) versus "local" (used for release of encapsulated materials) temperature rise. Similar analysis is extended to planar polymeric coatings, the lipid membrane system of vesicles and cells, on which nanoparticles are adsorbed. Insights are provided into the mechanisms of physicochemical and biological effects, the nature of which has always been profoundly, interactively, and engagingly discussed in the Department of Interfaces. This analysis is combined with recent developments providing outlook and highlighting a broad range of emerging applications.

Tannic Acid-Mediated Aggregate Stabilization of Poly(N-vinylpyrrolidone)-b-poly(oligo (ethylene glycol) methyl ether methacrylate) Double Hydrophilic Block Copolymers

The self-assembly of block copolymers in aqueous solution is an important field in modern polymer science that has been extended to double hydrophilic block copolymers (DHBC) in recent years. In here, a significant improvement of the self-assembly process of DHBC in aqueous solution by utilizing a linear-brush macromolecular architecture is presented. The improved self-assembly behavior of poly(N-vinylpyrrolidone)-b-poly(oligo(ethylene glycol) methyl ether methacrylate) (PVP-b-P(OEGMA)) and its concentration dependency is investigated via dynamic light scattering (DLS) (apparent hydrodynamic radii ≈ 100-120 nm). Moreover, the DHBC assemblies can be non-covalently crosslinked with tannic acid via hydrogen bonding, which leads to the formation of small aggregates as well (apparent hydrodynamic radius ≈ 15 nm). Non-covalent crosslinking improves the self-assembly and stabilizes the aggregates upon dilution, reducing the concentration dependency of aggregate self-assembly. Additionally, the non-covalent aggregates can be disassembled in basic media. The presence of aggregates was studied via cryogenic scanning electron microscopy (cryo-SEM) and DLS before and after non-covalent crosslinking. Furthermore, analytical ultracentrifugation of the formed aggregate structures was performed, clearly showing the existence of polymer assemblies, particularly after non-covalent crosslinking. In summary, we report on the completely hydrophilic self-assembled structures in solution formed from fully biocompatible building entities in water.

Shape-Dependent Biodistribution of Biocompatible Silk Microcapsules

Microcapsules are emerging as promising microsize drug carriers due to their remarkable deformability. Shape plays a dominant role in determining their vascular transportation. Herein, we explored the effect of the shape of the microcapsules on the in vivo biodistribution for rational design of microcapsules to achieve optimized targeting efficiency. Silk fibroin, a biocompatible, biodegradable, and abundant material, was utilized as a building block to construct biconcave discoidal and spherical microcapsules with diameter of 1.8 μm and wall thickness of 20 nm. We have compared the cytocompatibility, cellular uptake, and biodistribution of both microcapsules. Both biconcave and spherical microcapsules exhibited excellent cytocompatibility and internalization into cancer cells. During blood circulation in mice, both microcapsules showed retention in liver and kidney and most underwent renal clearance. However, we observed significantly higher accumulation of biconcave silk microcapsules in lung compared with spherical microcapsules, and the accumulation was found to be stable in lung even after 3 days. The higher concentration of biconcave discoidal microcapsules found in lung arises from pulmonary environment, margination dynamics, and enhanced deformation in bloodstream. Red blood cell (RBC)-mimicking silk microcapsules demonstrated here can potentially serve as a promising platform for delivering drugs for lung diseases.

Encapsulation and Ultrasound-Triggered Release of G-Quadruplex DNA in Multilayer Hydrogel Microcapsules

Nucleic acid therapeutics have the potential to be the most effective disease treatment strategy due to their intrinsic precision and selectivity for coding highly specific biological processes. However, freely administered nucleic acids of any type are quickly destroyed or rendered inert by a host of defense mechanisms in the body. In this work, we address the challenge of using nucleic acids as drugs by preparing stimuli responsive poly(methacrylic acid)/poly(N-vinylpyrrolidone) (PMAA/PVPON)n multilayer hydrogel capsules loaded with ~7 kDa G-quadruplex DNA. The capsules are shown to release their DNA cargo on demand in response to both enzymatic and ultrasound (US)-triggered degradation. The unique structure adopted by the G-quadruplex is essential to its biological function and we show that the controlled release from the microcapsules preserves the basket conformation of the oligonucleotide used in our studies. We also show that the (PMAA/PVPON) multilayer hydrogel capsules can encapsulate and release ~450 kDa double stranded DNA. The encapsulation and release approaches for both oligonucleotides in multilayer hydrogel microcapsules developed here can be applied to create methodologies for new therapeutic strategies involving the controlled delivery of sensitive biomolecules. Our study provides a promising methodology for the design of effective carriers for DNA vaccines and medicines for a wide range of immunotherapies, cancer therapy and/or tissue regeneration therapies in the future.

Peptide-Functionalized Hydrogel Cubes for Active Tumor Cell Targeting

Conjugation of bioactive targeting molecules to nano- or micrometer-sized drug carriers is a pivotal strategy to improve their therapeutic efficiency. Herein, we developed pH- and redox-sensitive hydrogel particles with a surface-conjugated cancer cell targeting ligand for specific tumor-targeting and controlled release of the anticancer drug doxorubicin. The poly(methacrylic acid) (PMAA) hydrogel cubes of 700 nm and 2 μm with a hepsin-targeting (IPLVVPL) surface peptide are produced through multilayer polymer assembly on sacrificial cubical mesoporous cores. Direct peptide conjugation to the disulfide-stabilized hydrogels through a thiol-amine reaction does not compromise the structural integrity, hydrophilicity, stability in serum, or pH/redox sensitivity but does affect internalization by cancer cells. The cell uptake kinetics and the ultimate extent of internalization are controlled by the cell type and hydrogel size. The peptide modification significantly promotes the uptake of the 700 nm hydrogels by hepsin-positive MCF-7 cells due to ligand-receptor recognition but has a negligible effect on the uptake of 2 μm PMAA hydrogels. The selectivity of 700 nm IPLVVPL-PMAA hydrogel cubes to hepsin-overexpressing tumor cells is further confirmed by a 3-10-fold higher particle internalization by hepsin-positive MCF-7 and SK-OV-3 compared to that of hepsin-negative PC-3 cells. This work provides a facile method to fabricate enhanced tumor-targeting carriers of submicrometer size and improves the general understanding of particle design parameters for targeted drug delivery.

Multilayer Hydrogel Capsules of Interpenetrated Network for Encapsulation of Small Molecules

We report on a facile capsule-based platform for efficient encapsulation of a broad spectrum of hydrophilic compounds with molecular weight less than 1000 g mol^-1. The encapsulated compounds extend from low-molecular-weight anionic Alexa Fluor 532 dye and cationic anticancer drug doxorubicin (DOX) to fluorescein isothiocyanate-dextrans with M_w ranging from 4000 to 40 000 g mol^-1. The pH-sensitive hydrogel capsules with an interpenetrated network shell are synthesized by layer-by-layer assembly of poly(methacrylic acid) (PMAA, M_w = 150 000 g mol^-1) and poly( N-vinylpyrrolidone) (PVPON, M_w = 1 300 000 g mol^-1) on 5 μm silica microparticles followed by chemical cross-linking of the PMAA multilayers. Following core dissolution, the result is a hollow microcapsule with PVPON interpenetrated in the PMAA network. The capsules exhibit a reversible change in the diameter with a swelling ratio of 1.5 upon pH variation from 7.5 to 5.5. Capsules cross-linked for 4 h display high permeability toward molecules with molecular weight under 1000 g mol^-1 at pH = 7.5 but exclude dextran molecules with M_w ≥ 40 000 g mol^-1. Encapsulation of small molecules was achieved at pH = 7.5 followed by sealing the capsule wall with 40 000 g mol^-1 dextran at pH = 5.5. This approach results in negatively charged molecules such as Alexa Fluor being entrapped within the capsule cavity, whereas positively charged molecules such as DOX are encapsulated within the negatively charged capsule shell. Considering the simple postloading approach, the ability to entrap both anionic and cationic small molecules, and the pH-responsiveness of the interpenetrated network in the physiologically relevant range, these capsules offer a versatile method for controlled delivery of multiple hydrophilic compounds.

Small Angle Scattering for Pharmaceutical Applications: From Drugs to Drug Delivery Systems

The sub-nanometer scale provided by small angle neutron and X-ray scattering is of special importance to pharmaceutical and biomedical investigators. As drug delivery devices become more functionalized and continue decreasing in size, the ability to elucidate details on size scales smaller than those available from optical techniques becomes extremely pertinent. Information gathered from small angle scattering therefore aids the endeavor of optimizing pharmaceutical efficacy at its most fundamental level. This chapter will provide some relevant examples of drug carrier technology and how small angle scattering (SAS) can be used to solve their mysteries. An emphasis on common first-step data treatments is provided which should help clarify the contents of scattering data to new researchers. Specific examples of pharmaceutically relevant research on novel systems and the role SAS plays in these studies will be discussed. This chapter provides an overview of the current applications of SAS in drug research and some practical considerations for selecting scattering techniques.

Chemistry and engineering of cyclodextrins for molecular imaging

Cyclodextrins (CDs) are naturally occurring cyclic oligosaccharides bearing a basket-shaped topology with an "inner-outer" amphiphilic character. The abundance of hydroxyl groups enables CDs to be functionalized with multiple targeting ligands and imaging elements. The imaging time, and the payload of different imaging elements, can be tuned by taking advantage of the commercial availability of CDs with different sizes of the cavity. This review aims to offer an outlook of the chemistry and engineering of CDs for the development of molecular probes. Complexation thermodynamics of CDs, and the corresponding implications for probe design, are also presented with examples demonstrating the structural and physiochemical roles played by CDs in the full ambit of molecular imaging. We hope that this review not only offers a synopsis of the current development of CD-based molecular probes, but can also facilitate translation of the incremental advancements from the laboratory to real biomedical applications by illuminating opportunities and challenges for future research.

Nanocarriers for spleen targeting: anatomo-physiological considerations, formulation strategies and therapeutic potential

There are several clinical advantages of spleen targeting of nanocarriers. For example, enhanced splenic concentration of active agents could provide therapeutic benefits in spleen resident infections and hematological disorders including malaria, hairy cell leukemia, idiopathic thrombocytopenic purpura, and autoimmune hemolytic anemia. Furthermore, spleen delivery of immunosuppressant agents using splenotropic carriers may reduce the chances of allograft rejection in organ transplantation. Enhanced concentration of radiopharmaceuticals in the spleen may improve visualization of the organ, which could provide benefit in the diagnosis of splenic disorders. Unique anatomical features of the spleen including specialized microvasculature environment and slow blood circulation rate enable it an ideal drug delivery site. Because there is a difference in blood flow between spleen and liver, splenic delivery is inversely proportional to the hepatic uptake. It is therefore desirable engineering of nanocarriers, which, upon intravenous administration, can avoid uptake by hepatic Kupffer cells to enhance splenic localization. Stealth and non-spherical nanocarriers have shown enhanced splenic delivery of active agents by avoiding hepatic uptake. The present review details the research in the field of splenotropy. Formulation strategies to design splenotropic drug delivery systems are discussed. The review also highlights the clinical relevance of spleen targeting of nanocarriers and application in diagnostics.

The effect of particle shape on cellular interaction and drug delivery applications of micro- and nanoparticles

Encapsulation of therapeutic agents in nanoparticles offers several benefits including improved bioavailability, site specific delivery, reduced toxicity and in vivo stability of proteins and nucleotides over conventional delivery options. These benefits are consequence of distinct in vivo pharmacokinetic and biodistribution profile of nanoparticles, which is dictated by the complex interplay of size, surface charge and surface hydrophobicity. Recently, particle shape has been identified as a new physical parameter which has exerted tremendous impact on cellular uptake and biodistribution, thereby in vivo performance of nanoparticles. Improved therapeutic efficacy of anticancer agents using non-spherical particles is the recent development in the field. Additionally, immunological response of nanoparticles was also altered when antigens were loaded in non-spherical nanovehicles. The apparent impact of particle shape inspired the new research in the field of drug delivery. The present review therefore details the research in this field. The review focuses on methods of fabrication of particles of non-spherical geometries and impact of particle shape on cellular uptake, biodistribution, tumor targeting and production of immunological responses.

From a silane monomer to anisotropic buckled silica nanospheres: a polymer-mediated, solvent-free and one-pot synthesis

The morphology of particles, along with other particle attributes, has been shown to affect the biological fate of particles administered into the body. Particles with collapsed surfaces or shells (dimpled, buckled or crumpled) can have different appearances, under the microscope, that resemble many things encountered in our daily life, such as apples/cherries, doughnuts, and bowls. Recent studies have demonstrated that they are not just particles with interesting geometries, but they can also be used as functional blocks for assembled complex materials. Since previous research focus has been on micron-sized particles and organic solvents were often used, it is of particular interest to synthesize the nanosized counterpart with a buckled surface using a purely aqueous method. Herein we report a facile method for rapid synthesis of buckled silica nanoparticles (SiNPs) based on S-nitrosothiol chemistry in a solvent-free reaction. 3-Mercaptopropyl trimethoxysilane (MPTMS) was used as a single silane source in a one-pot aqueous solution containing sodium nitrite and polyvinyl alcohol (PVA). Upon the addition of HCl, S-nitrosation and condensation of MPTMS occur simultaneously and the reaction system undergoes a rapid transition from a clear solution to a solution containing nanoparticles with a lag time controlled mainly by the amount of HCl added. The experimental parameters were systematically studied to determine the optimal concentration of each component. For a typical reaction, sub-100 nm nanoparticles can be produced in less than 1 h, and the best result can be obtained within 2 to 4 h. Remarkably, the nanoparticle exhibits buckled surface morphologies under TEM and SEM. The average size is about 60 nm in diameter. Moreover, the solid-state Si-NMR data show that T² and T³ silicon species are rapidly evolved with slight dynamic changes over the reaction time. Further, PVA is shown to control the surface buckling as well as to stabilize the formed particles. The as-prepared SiNPs can be used as a nitric oxide (NO) carrier with the potential to release NO in an apparent zero-order manner. In conclusion, the study demonstrates the feasibility of employing an aqueous route for efficiently preparing SiNPs with multifarious surface cavities based on S-nitrosothiol chemistry.

Polyphenolic Polymersomes of Temperature-Sensitive Poly(N-vinylcaprolactam)-block-Poly(N-vinylpyrrolidone) for Anticancer Therapy

We report a versatile synthesis for polyphenolic polymersomes of controlled submicron (<500 nm) size for intracellular delivery of high and low molecular weight compounds. The nanoparticles are synthesized by stabilizing the vesicular morphology of thermally responsive poly(N-vinylcaprolactam)_n-b-poly(N-vinylpyrrolidone)_m (PVCL_n-PVPON_m) diblock copolymers with tannic acid (TA), a hydrolyzable polyphenol, via hydrogen bonding at a temperature above the copolymer's lower critical solution temperature (LCST). The PVCL₁₇₉-PVPON_m diblock copolymers are produced by controlled reversible addition-fragmentation chain transfer (RAFT) polymerization of PVPON using PVCL as a macro-chain transfer agent. The size of the TA-locked (PVCL₁₇₉-PVPON_m) polymersomes at room temperature and upon temperature variations are controlled by the PVPON chain length and TA:PVPON molar unit ratio. The particle diameter decreases from 1000 to 950, 770, and 250 nm with increasing PVPON chain length (m = 107, 166, 205, 234), and it further decreases to 710, 460, 290, and 190 nm, respectively, upon hydrogen bonding with TA at 50 °C. Lowering the solution temperature to 25 °C results in a slight size increase for vesicles with longer PVPON. We also show that TA-locked polymersomes can encapsulate and store the anticancer drug doxorubicin (DOX) and higher molecular weight fluorescein isothiocyanate (FITC)-dextran in a physiologically relevant pH and temperature range. Encapsulated DOX is released in the nuclei of human alveolar adenocarcinoma tumor cells after 6 h incubation via biodegradation of the TA shell with the cytotoxicity of DOX-loaded polymersomes being concentration-dependent. Our approach offers biocompatible and intracellular degradable nanovesicles of controllable size for delivery of a variety of encapsulated materials. Considering the particle monodispersity, high loading capacity, and a facile two-step aqueous assembly based on the reversible temperature-responsiveness of PVCL, these polymeric vesicles have significant potential as novel drug nanocarriers and provide a new perspective for fundamental studies on thermo-triggered polymer assemblies in solutions.

Theranostic Multilayer Capsules for Ultrasound Imaging and Guided Drug Delivery

Despite the accessibility of ultrasound, the clinical potential of ultrasound-active theranostic agents has not been fully realized because it requires combining sufficient imaging contrast, high encapsulation efficiency, and ultrasound-triggered release in one entity. We report on theranostic polymer microcapsules composed of hydrogen-bonded multilayers of tannic acid and poly(N-vinylpyrrolidone) that produce high imaging contrast and deliver the anticancer drug doxorubicin upon low-power diagnostic or high-power therapeutic ultrasound irradiation. These capsules exhibit excellent imaging contrast in both brightness and harmonic modes and show prolonged contrast over six months, unlike commercially available microbubbles. We also demonstrate low-dose gradual and high-dose fast release of doxorubicin from the capsules by diagnostic (∼100 mW/cm2) and therapeutic (>10 W/cm2) ultrasound irradiation, respectively. We show that the imaging contrast of the capsules can be controlled by varying the number of layers, polymer type (relatively rigid tannic acid versus more flexible poly(methacrylic acid)), and polymer molecular weight. In vitro studies demonstrate that 50% doxorubicin release from ultrasound-treated capsules induces 97% cytotoxicity to MCF-7 human cancer cells, while no cytotoxicity is found without the treatment. Considering the strong ultrasound imaging contrast, high encapsulation efficiency, biocompatibility, and tunable drug release, these microcapsules can be used as theranostic agents for ultrasound-guided chemotherapy.

Islet encapsulation with polyphenol coatings decreases pro-inflammatory chemokine synthesis and T cell trafficking

Type 1 Diabetes (T1D) is a chronic pro-inflammatory autoimmune disease consisting of islet-infiltrating leukocytes involved in pancreatic β-cell lysis. One promising treatment for T1D is islet transplantation; however, clinical application is constrained due to limited islet availability, adverse effects of immunosuppressants, and declining graft survival. Islet encapsulation may provide an immunoprotective barrier to preserve islet function and prevent immune-mediated rejection after transplantation. We previously demonstrated that a novel cytoprotective nanothin multilayer coating for islet encapsulation consisting of tannic acid (TA), an immunomodulatory antioxidant, and poly(N-vinylpyrrolidone) (PVPON), was efficacious in dampening in vitro immune responses involved in transplant rejection and preserving in vitro islet function. However, the ability of (PVPON/TA) to maintain islet function in vivo and reverse diabetes has not been tested. Recent evidence has demonstrated that modulation of redox status can affect pro-inflammatory immune responses. Therefore, we hypothesized that transplanted (PVPON/TA)-encapsulated islets can restore euglycemia to diabetic mice and provide an immunoprotective barrier. Our results demonstrate that (PVPON/TA) nanothin coatings can significantly decrease in vitro chemokine synthesis and diabetogenic T cell migration. Importantly, (PVPON/TA)-encapsulated islets restored euglycemia after transplantation into diabetic mice. Our results demonstrate that (PVPON/TA)-encapsulated islets may suppress immune responses and enhance islet allograft acceptance in patients with T1D.

Loading Capacity versus Enzyme Activity in Anisotropic and Spherical Calcium Carbonate Microparticles

A new method of fabrication of calcium carbonate microparticles of ellipsoidal, rhomboidal, and spherical geometries is reported by adjusting the relative concentration ratios of the initial salt solutions and/or the ethylene glycol content in the reaction medium. Morphology, porosity, crystallinity, and loading capacity of synthesized CaCO3 templates were characterized in detail. Particles harboring dextran or the enzyme guanylate kinase were obtained through encapsulation of these macromolecules using the layer-by-layer assembly technique to deposit positively and negatively charged polymers on these differently shaped CaCO3 templates and were characterized by confocal laser scanning fluorescence microscopy, fluorometric techniques, and enzyme activity measurements. The enzymatic activity, an important application of such porous particles and containers, has been analyzed in comparison with the loading capacity and geometry. Our results reveal that the particles' shape influences morphology of particles and that, as a result, affects the activity of the encapsulated enzymes, in addition to the earlier reported influence on cellular uptake. These particles are promising candidates for efficient drug delivery due to their relatively high loading capacity, biocompatibility, and easy fabrication and handling.

Enhanced Cellular Uptake of Bowl-like Microcapsules

Among several properties of colloidal particles, shape is emerging as an important parameter for tailoring the interactions between particles and cells. In this study, bowl-like multilayer microcapsules were prepared by osmotic-induced invagination of their spherical counterparts in a concentrated polyelectrolyte solution. The internalization behaviors of bowl-like and spherical microcapsules were compared by coincubation with smooth muscle cells (SMCs) and macrophages. The bowl-like capsules tended to attach onto the cell membranes from the bend side and could be enwrapped by the membranes of SMCs, leading to a faster uptake rate and larger accumulation inside cells than those of their spherical counterparts. These results are important for understanding the shape-dependent internalization behavior, providing useful guidance for further materials design especially in biomedical applications.

Non-affinity factors modulating vascular targeting of nano- and microcarriers

Particles capable of homing and adhering to specific vascular biomarkers have potential as fundamental tools in drug delivery for mediation of a wide variety of pathologies, including inflammation, thrombosis, and pulmonary disorders. The presentation of affinity ligands on the surface of a particle provides a means of targeting the particle to sites of therapeutic interest, but a host of other factors come into play in determining the targeting capacity of the particle. This review presents a summary of several key considerations in nano- and microparticle design that modulate targeted delivery without directly altering epitope-specific affinity. Namely, we describe the effect of factors in definition of the base carrier (including shape, size, and flexibility) on the capacity of carriers to access, adhere to, and integrate in target biological milieus. Furthermore, we present a summary of fundamental dynamics of carrier behavior in circulation, taking into account interactions with cells in circulation and the role of hemodynamics in mediating the direction of carriers to target sites. Finally, we note non-affinity aspects to uptake and intracellular trafficking of carriers in target cells. In total, recent findings presented here may offer an opportunity to capitalize on mitigating factors in the behavior of ligand-targeted carriers in order to optimize targeting.