Effect of glycounits on the antimicrobial properties and toxicity behavior of polymers based on quaternized DMAEMA

Smart Galactosidase-Responsive Antimicrobial Dendron: Towards More Biocompatible Membrane-Disruptive Agents

Antimicrobial resistance is a global healthcare challenge that urgently needs the development of new therapeutic agents. Antimicrobial peptides and mimics thereof are promising candidates but mostly suffer from inherent toxicity issues due to the non-selective binding of cationic groups with mammalian cells. To overcome this toxicity issue, this work herein reports the synthesis of a smart antimicrobial dendron with masked cationic groups (Gal-Dendron) that could be uncaged in the presence of β-galactosidase enzyme to form the activated Enz-Dendron and confer antimicrobial activity. Enz-Dendron show bacteriostatic activity toward Gram-negative (P. aeruginosa and E. coli) and Gram-positive (S. aureus) bacteria with minimum inhibitory concentration values of 96 µm and exerted its antimicrobial mechanism via a membrane disruption pathway, as indicated by inner and outer membrane permeabilization assays. Crucially, toxicity studies confirmed that the masked prodrug Gal-Dendron exhibited low hemolysis and is at least 2.4 times less toxic than the uncaged cationic Enz-Dendron, thus demonstrating the advantage of masking the cationic groups with responsive immolative linkers to overcome toxicity and selectivity issues. Overall, this study highlights the potential of designing new membrane-disruptive antimicrobial agents that are more biocompatible via the amine uncaging strategy.

Enzymatic interlocking aptamer-micelles for enhanced cellular internalization and nucleus-targeted cancer phototherapy

Multifunctional micelles that permit both diagnosis and treatment present enormous advantage and potential for precision medicine. However, the inherent complexities and structural instability of these systems often cause unsatisfactory targeting and therapeutic performances. Herein, by ingenious design of a 2,5-bis(2-thienyl)pyrrole (SNS) modifier to covalently link with AS1411 aptamer and lipid segment, a simple strategy is proposed for one-step enzymatic preparation of interlocked aptamer-micelle (IApM) under bio-friendly conditions. The interlocked poly(SNS) skeleton in IApM can not only stabilize the micelle structure but also enhance near-infrared (NIR) absorption ability, thus further enhancing cellular internalization and photothermal therapy. In addition, the multivalent AS1411 aptamers tethered in the hydrophilic shell can simultaneously increase the specific binding affinity of DNA micelles and induce nucleus-targeted accumulation for DNA damage-triggered apoptosis. This DNA micelle achieves "best of both worlds" with enhanced biostability for cellular internalization and improved NIR photothermal conversion efficiency for nucleus-targeted therapy, which provides a promising formulation strategy for precision cancer treatment.

Bacterial-Infection-Triggered Release of Antibacterial Aldehyde from Triblock Copolyether Hydrogels

Bacterial infections pose a significant threat to public health worldwide. Hydrogel-based biomaterials have proven to be particularly useful in addressing persistent bacterial infections due to their stimuli-responsive degradability, high biocompatibility, ability to release antibacterial agents on demand, and long-lasting antibacterial activity. Herein, we fabricated ABA-type triblock copolyether hydrogels, wherein, hexanal, a bioactive aldehyde with antibacterial activity, was affixed to the hydrophobic micellar core via acetal linkage. The hydrogel exhibited degradation under acidic environment via the hydrolysis of acetal linkages, leading to the concomitant release of hexanal to exhibit highly potent bactericidal activity against both Escherichia coli and Staphylococcus aureus. Furthermore, a dual-mode release of the model therapeutic agent Nile Red from the hydrophobic micellar core of the hydrogel in conjunction with hexanal was demonstrated using this system. We anticipate that this study will provide a new platform for the development of hydrogels with tailorable release profiles for biologically active compounds that are activated by the acidification triggered by bacterial infection.

A Novel Cationic Polymer Surfactant for Regulation of the Rheological and Biocidal Properties of the Water-Based Drilling Muds

The copolymer of N,N-diallyl-N,N-dimethylammonium chloride and N-[3-(Dimethylamino)propyl]methacrylamide (DADMAC-DMAPMA) was synthesized by radical polymerization reaction in an aqueous solution in the presence of the initiator ammonium persulfate (NH₄)₂S₂O₈. The molar compositions of the synthesized copolymers were determined using FTIR and ¹H NMR-spectroscopy, elemental analysis, and conductometric titration. It was found that in the radical copolymerization reaction, the DMAPMA monomer was more active than the DADMAC monomer; for this reason, the resulting copolymers were always enriched in the DMAPMA monomers. The study of the influence of the DADMAC-DMAPMA copolymer on structure-formation in the bentonite suspension showed that this copolymer significantly increased the static shear stress (SSS) of the system. In this case, the structure-forming properties of the copolymer depended on the pH of the medium. The lower the pH level, the better the structure-formation was in the suspension in the presence of the copolymer. The study of antibacterial activity showed that the DADMAC-DMAPMA copolymer had a biocidal effect against sulfate-reducing bacteria (CRB) at a concentration of not less than 0.05 wt.% and can be used to inhibit the growth of this bacteria.

Tackling Antibiotic Resistance: Influence of Aliphatic Branches on Broad-Spectrum Antibacterial Polytriazoles against ESKAPE Group Pathogens

One of the most important threats to public health is the appearance of multidrug-resistant pathogenic bacteria, since they are the cause of a high number of deaths worldwide. Consequently, the preparation of new effective antibacterial agents that do not generate antimicrobial resistance is urgently required. We report on the synthesis of new linear cationic antibacterial polytriazoles that could be a potential source of new antibacterial compounds. These polymers were prepared by thermal- or copper-catalyzed click reactions of azide and alkyne functions. The antibacterial activity of these materials can be modulated by varying the size or nature of their side chains, as this alters the hydrophilic/hydrophobic balance. Antibacterial activity was tested against pathogens of the ESKAPE group. The P3TD polymer, which has butylated side chains, was found to have the highest bactericidal activity. The toxicity of selected polytriazoles was investigated using human red blood cells and a human gingival fibroblast cell line. The propensity of prepared polytriazoles to induce resistance in certain bacteria was studied. Some of them were found to not produce resistance in methicillin-resistant Staphylococcus aureus or Pseudomonas aeruginosa. The interaction of these polytriazoles with the Escherichia coli membrane produces both depolarization and disruption of the membrane.

Synthesis and Characterization of High Viscosity Cationic Poly(Proline-Epichlorohydrin) Composite Polymer with Antibacterial Functionalities

We report microbial resistance and catalytic activity of high viscosity cationic poly(proline-epichlorohydrin) composite (PRO-EPI) in the aqueous system. The PRO-EPI was prepared by a simple polycondensation, followed by FTIR, ¹H NMR, SEM, DLS, viscosity, and DSC/TGA characterization. Several concentrations of the PRO-EPI were tested against Gram-negative (E. coli and Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus) microorganisms. The antimicrobial screening revealed that PRO-EPI was a potent antimicrobial agent with the least inhibitory concentrations (MICs) of 128 µg/mL against Gram-negative microorganisms. The PRO-EPI indicated no inhibitory effect against Gram-positive microorganisms. It was determined that PRO-EPI contains polymeric-quaternary ammonium compounds that inactivate the Gram-negative microorganisms by a dual mode of action and carries domains for electrostatic interaction with the microbial membrane and an intracellular target. To study the removal of toxic industrial wastewater, congo red (CR) was tested using sodium borohydride as a reducing agent. Adsorption was achieved within 20 min at a rate constant of 0.92 ks⁻¹. UV–vis spectra showed that the removal of CR in the reaction solution was due to the breakup of the azo (–N=N–) bonds and adsorption of aromatic fragments. PRO is biodegradable and non-toxic, and PRO-EPI was found to be both antimicrobial and also acts as a catalyst for the removal of congo red dye.

Influence of PEG Subunit on the Biological Activity of Ionenes: Synthesis of Novel Polycations, Antimicrobial and Toxicity Studies

An alarming increase of antibiotic resistance among pathogens creates an urgent need to develop new antimicrobial agents. Many reported polycations show high antimicrobial activity along with low hemolytic activity. Unfortunately, most of those molecules remain highly cytotoxic against various mammalian cells. In this work, we present a systematic study on the impact of triethylene glycol monomethyl ether side groups (short PEG analog) on antimicrobial, hemolytic, and cytotoxic properties of novel amphiphilic ionenes. A detailed description of synthesis, leading to well-defined alternating polymers, which differ in structural elements responsible for hydrophilicity (PEG) and hydrophobicity (alkyl chain), is presented. Obtained results show that the PEG moiety and fine-tuned hydrophilic-lipophilic balance of ionenes synergistically lead to low-cytotoxic, low-hemolytic molecules with high activity against S. aureus, including methicillin-resistant strains (MRSA). Additionally, the results of mechanistic studies on bacterial cells and fluorescently labeled liposomes are also discussed. This article is protected by copyright. All rights reserved.

Comparable Studies on Nanoscale Antibacterial Polymer Coatings Based on Different Coating Procedures

The antibacterial activity of different antibiotic and metal-free thin polymer coatings was investigated. The films comprised quaternary ammonium compounds (QAC) based on a vinyl benzyl chloride (VBC) building block. Two monomeric QAC of different alkyl chain lengths were prepared, and then polymerized by two different polymerization processes to apply them onto Ti surfaces. At first, the polymeric layer was generated directly on the surface by atom transfer radical polymerization (ATRP). For comparison purposes, in a classical route a copolymerization of the QAC-containing monomers with a metal adhesion mediating phosphonate (VBPOH) monomers was carried out and the Ti surfaces were coated via drop coating. The different coatings were characterized by X-ray photoelectron spectroscopy (XPS) illustrating a thickness in the nanomolecular range. The cytocompatibility in vitro was confirmed by both live/dead and WST-1 assay. The antimicrobial activity was evaluated by two different assays (CFU and BTG, resp.,), showing for both coating processes similar results to kill bacteria on contact. These antibacterial coatings present a simple method to protect metallic devices against microbial contamination.

Antibacterial and cytotoxic properties of star-shaped quaternary ammonium-functionalized polymers with different pendant groups

The correlation between the structure and biological activity of polymers is critically important for rationally designing effective antibacterial polymers. Here, the antibacterial activity, cytotoxicity, and selectivity of structurally well-defined, star-shaped...

Bioactive Synthetic Polymers

Synthetic polymers are omnipresent in society as textiles and packaging materials, in construction and medicine, among many other important applications. Alternatively, natural polymers play a crucial role in sustaining life and allowing organisms to adapt to their environments by performing key biological functions such as molecular recognition and transmission of genetic information. In general, the synthetic and natural polymer worlds are completely separated due to the inability for synthetic polymers to perform specific biological functions; in some cases, synthetic polymers cause uncontrolled and unwanted biological responses. However, owing to the advancement of synthetic polymerization techniques in recent years, new synthetic polymers have emerged that provide specific biological functions such as targeted molecular recognition of peptides, or present antiviral, anticancer, and antimicrobial activities. In this review, the emergence of this generation of bioactive synthetic polymers and their bioapplications are summarized. Finally, the future opportunities in this area are discussed.

Host Defense Peptide-Mimicking Polymers and Polymeric-Brush-Tethered Host Defense Peptides: Recent Developments, Limitations, and Potential Success

Amphiphilic antimicrobial polymers have attracted considerable interest as structural mimics of host defense peptides (HDPs) that provide a broad spectrum of activity and do not induce bacterial-drug resistance. Likewise, surface engineered polymeric-brush-tethered HDP is considered a promising coating strategy that prevents infections and endows implantable materials and medical devices with antifouling and antibacterial properties. While each strategy takes a different approach, both aim to circumvent limitations of HDPs, enhance physicochemical properties, therapeutic performance, and enable solutions to unmet therapeutic needs. In this review, we discuss the recent advances in each approach, spotlight the fundamental principles, describe current developments with examples, discuss benefits and limitations, and highlight potential success. The review intends to summarize our knowledge in this research area and stimulate further work on antimicrobial polymers and functionalized polymeric biomaterials as strategies to fight infectious diseases.

Membrane-disruptive peptides/peptidomimetics-based therapeutics: Promising systems to combat bacteria and cancer in the drug-resistant era

Membrane-disruptive peptides/peptidomimetics (MDPs) are antimicrobials or anticarcinogens that present a general killing mechanism through the physical disruption of cell membranes, in contrast to conventional chemotherapeutic drugs, which act on precise targets such as DNA or specific enzymes. Owing to their rapid action, broad-spectrum activity, and mechanisms of action that potentially hinder the development of resistance, MDPs have been increasingly considered as future therapeutics in the drug-resistant era. Recently, growing experimental evidence has demonstrated that MDPs can also be utilized as adjuvants to enhance the therapeutic effects of other agents. In this review, we evaluate the literature around the broad-spectrum antimicrobial properties and anticancer activity of MDPs, and summarize the current development and mechanisms of MDPs alone or in combination with other agents. Notably, this review highlights recent advances in the design of various MDP-based drug delivery systems that can improve the therapeutic effect of MDPs, minimize side effects, and promote the co-delivery of multiple chemotherapeutics, for more efficient antimicrobial and anticancer therapy.

Synergism between Rifampicin and Cationic Polyurethanes Overcomes Intrinsic Resistance of Escherichia coli

Antibiotic-resistant Gram-negative bacteria are emergent pathogens, causing millions of infections worldwide. While there are several classes of antibiotics that are effective against Gram-positive bacteria, the outer membrane (OM) of Gram-negative bacteria excludes high-molecular-weight hydrophobic antibiotics, making these species intrinsically resistant to several classes of antibiotics, including polyketides, aminocoumarins, and macrolides. The overuse of antibiotics such as β-lactams has also promoted the spread of resistance genes throughout Gram-negative bacteria, including the production of extended spectrum β-lactamases (ESBLs). The combination of innate and acquired resistance makes it extremely challenging to identify antibiotics that are effective against Gram-negative bacteria. In this study, we have demonstrated the synergistic effect of outer membrane-permeable cationic polyurethanes with rifampicin, a polyketide that would otherwise be excluded by the OM, on different strains of E. coli, including a clinically isolated uropathogenic multidrug-resistant (MDR) E. coli. Rifampicin combined with a low-dose treatment of a cationic polyurethane reduced the MIC in E. coli of rifampicin by up to 64-fold. The compositions of cationic polyurethanes were designed to have low hemolysis and low cell cytotoxicity while maintaining high antibacterial activity. Our results demonstrate the potential to rescue the large number of available OM-excluded antibiotics to target normally resistant Gram-negative bacteria via synergistic action with these cationic polyurethanes, acting as a novel antibiotic adjuvant class.

Facile Synthesis of Imidazolium-Based Block Copolypeptides with Excellent Antimicrobial Activity

Antimicrobial polypeptides are promising mimics of antimicrobial peptides (AMPs) with low risks of antimicrobial resistance (AMR). Polypeptides with facile and efficient production, high antimicrobial activity, and low toxicity toward mammalian cells are highly desirable for practical applications. Herein, triblock copolypeptides with chloro groups (PPG_n-PCPBLG_m) and different main-chain lengths were synthesized via an ultrafast ring-opening polymerization (ROP) using a macroinitiator, namely poly(propylene glycol) bis(2-aminopropyl ether), and purified or nonpurified monomer (i.e., CPBLG-NCA). PPG_n-PCPBLG_m with 90 amino acid residues can be readily prepared within 300 s. Imidazolium-based block copolypeptides (PPG_n-PIL_m) were facilely prepared via nucleophilic substitution of PPG_n-PCPBLG_m with NaN₃ and subsequent "click" chemistry. α-Helical PPG_n-PIL_m can self-assemble into nanostructured and cationic micelles which displayed highly potent antimicrobial activity and low hemolysis. The top-performing material, namely PPG₃₄-PIL₇₀, showed low minimum inhibitory concentration (MIC) against both Gram-positive S. aureus and Gram-negative E. coli (25 μg mL^-1). It also displayed low toxicity against mouse embryonic fibroblast (NIH 3T3) and human embryonic kidney (293T) cells at 2× MIC.

Functional ferrocene polymer multilayer coatings for implantable medical devices: Biocompatible, antifouling, and ROS-sensitive controlled release of therapeutic drugs

Bacterial infections and the formation of biofilms on the surface of implantable medical devices are critical issues that cause device failure. Implantable medical devices, such as drug delivery technologies, offer promising benefits for targeted and prolonged drug release, but a number of common disadvantages arise that include inadequate release and side effects. Organic film coatings for antifouling and drug delivery are expected to overcome these challenges. Ferrocene polymer-based multifunctional multilayer films were prepared to control the reactive oxygen species (ROS)-responsive release of therapeutic agents while maintaining an antifouling effect and improving biocompatibility. Polymers based on ferrocene and polyethylene glycol were prepared by controlling the molar ratio of carboxylate and amine groups. Layer-by-layer deposition was optimized to achieve the linear growth and self-assembly of dense and stable films. Outstanding anti-biofilm activity (~91% decrease) could be achieved and the films were found to be blood compatible. Importantly, the films effectively incorporated hydrophobic drugs and exhibited dual-responsive drug release at low pH and under ROS conditions at physiological pH. Drug delivery to MCF-7 breast cancer cells was achieved using a Paclitaxel loaded film, which exhibited an anticancer efficacy of 62%. STATEMENT OF SIGNIFICANCE: Healthcare associated infection is caused by the formation of a biofilm by bacteria on the surface of a medical device. In order to solve this, extensive research has been conducted on many coating technologies. Also, a method of chemical treatment by releasing the drug when it enters the body by loading the drug into the coating film is being studied. However, there is still a lack of technology that can achieve both functions of preventing biofilm production and drug delivery. Therefore, in this study, a multilayer thin film that supports drug and inhibits biofilm formation was prepared through Layer-by-Layer coating of a polymer containing PEG to prevent adsorption. As such, it helps the design of multifunctional coatings for implantable medical devices.

Efficient synthesis and excellent antimicrobial activity of star-shaped cationic polypeptides with improved biocompatibility

Antimicrobial peptides (AMPs) have been considered as a promising new tool to combat the antimicrobial resistance (AMR) crisis. However, the high toxicity and high cost of AMPs hampered their further development. Herein, a series of star poly(_L-lysine) (PLL) homo- and copolymers with excellent antimicrobial activity and improved biocompatibility were prepared by the combination of ultra-fast ring opening polymerization (ROP) and side-chain modification. The amine-terminated polyamidoamine dendrimer (Gx-PAMAM) mediated ROP of Nε-tert-butyloxycarbonyl-_L-lysine N-carboxyanhydride (Boc-_L-Lys-NCA) and γ-benzyl-_L-glutamic acid-based N-carboxyanhydride (PBLG-NCA) was able to prepare star PLL homo- and copolymers with 400 residues within 50 min. While the star PLL homopolymers exhibited low minimum inhibitory concentration (MIC = 50-200 μg mL^-1) against both Gram-positive and Gram-negative bacteria (i.e., S. aureus and E. coli), they showed high toxicity against various mammalian cell lines. The star PLL copolymers with low contents of hydrophobic and hydroxyl groups showed enhanced antimicrobial activity (MIC = 25-50 μg mL^-1) and improved mammalian cell viability. Both SEM and CLSM results indicated the antimicrobial mechanism of membrane disruption.

Biobased polymers derived from itaconic acid bearing clickable groups with potent antibacterial activity and negligible hemolytic activity

We report the synthesis of new biobased polymers derived from itaconic acid with excellent antibacterial activity against Gram-positive bacteria and very low hemotoxicity.

Hemolytic and Antimicrobial Activities of a Series of Cationic Amphiphilic Copolymers Comprised of Same Centered Comonomers with Thiazole Moieties and Polyethylene Glycol Derivatives

A series of well-defined antimicrobial polymers composed of comonomers bearing thiazole ring (2-(((2-(4-methylthiazol-5-yl)ethoxy)carbonyl)oxy)ethyl methacrylate monomer (MTZ)) and non-hemotoxic poly(ethylene glycol) side chains (poly(ethylene glycol) methyl ether methacrylate (PEGMA)) were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. By post-polymerization functionalization strategy, polymers were quaternized with either butyl or octyl iodides to result in cationic amphiphilic copolymers incorporating thiazolium groups, thus with variable hydrophobic/hydrophilic balance associated to the length of the alkylating agent. Likewise, the molar percentage of PEGMA was modulated in the copolymers, also affecting the amphiphilicity. The antimicrobial activities of these cationic polymers were determined against Gram-positive and Gram-negative bacteria and fungi. Minimum inhibitory concentration (MIC) was found to be dependent on both length of the alkyl hydrophobic chain and the content of PEGMA in the copolymers. More hydrophobic octylated copolymers were found to be more effective against all tested microorganisms. The incorporation of non-ionic hydrophilic units, PEGMA, reduces the hydrophobicity of the system and the activity is markedly reduced. This effect is dramatic in the case of butylated copolymers, in which the hydrophobic/hydrophilic balance is highly affected. The hemolytic properties of polymers analyzed against human red blood cells were greatly affected by the hydrophobic/hydrophilic balance of the copolymers and the content of PEGMA, which drastically reduces the hemotoxicity. The copolymers containing longer hydrophobic chain, octyl, are much more hemotoxic than their corresponding butylated copolymers.

Aggregation of methacrylate-based ternary biomimetic antimicrobial polymers in solution

Using detailed atomistic simulations, we explore the morphological characteristics of aggregates formed in solution phase by ternary biomimetic antimicrobial (AM) methacrylate polymers, composed of hydrophobic, charged cationic and polar functional groups and compare it with aggregate morphologies of binary methacrylate polymers, composed only of hydrophobic and charged cationic functional groups. The effect of sequence of the constituent functional groups on aggregate conformation is also studied by considering random and block sequences along the polymer backbone. Our results show that while binary polymers tend to form robust aggregates, replacing some of the hydrophobic groups with overall charge neutral polar groups weakens the aggregate considerably, leading to increased conformational fluctuations and formation of loose-packed, open aggregates, particularly in the case of random ternary polymers. Interaction energy calculations clearly suggest that the role of inclusion of polar groups in ternary polymers is two-fold: (1) to reduce possible strong local concentration of hydrophobic groups and 'smear' the overall hydrophobicity along the polymer backbone to increase the solubility of the polymers (2) to compensate the loss of attractive hydrophobic interactions by forming attractive electrostatic interactions with the charged groups and contribute to aggregation formation, albeit weak. Given that most of the naturally occurring AM peptides have contributions from all the three functional groups, this study elucidates the functionally tuneable role of inclusion of polar groups in the way AM agents interact with each other in solution phase, which can eventually dictate their partitioning behaviour into bacterial and mammalian membranes.

Antibacterial properties of synthesized cyclic and linear cationic copolymers

Antibacterial activities of cationic cyclic copolymers compared to those of their linear counterparts were investigated.

A Multi-Functional Silicon Nanoparticle Designed for Enhanced Osteoblast Calcification and Related Combination Therapy

Implant materials applied in bone defect commonly focus on the inducement of bone regeneration and neglect to cure complications including bacterial infection and inflammation, which may result in delayed unions or even amputation. In this study, a microporous silica nanoparticle-poly(N-isopropylacrylamide-b-(2-(dimethylamino)ethyl methacrylate) is synthesized for loading DXMS and the ECM-derived peptide (Sequence: Succinic acid-GTPGPQGIAGQRGVV) in order to enhance the osteoblast calcification and relieve related symptoms. Positively charged PDMA blocks endow the nanoparticle with the antimicrobial property. Moreover, the combination of DXMS makes it have the ability of anti-inflammation and promoting calcification formation. Furthermore, incorporation of the peptide leads to a significant improvement of mineralization and alkaline phosphatase expression in the preosteoblast. After intramuscular implantation in mice for four weeks, the results indicate the composite nanoparticle can promote ectopic bone formation. These combined properties make the composite silicon nanoparticle a promising osteogenic drug appropriate for further study in bone repair and related combination therapy.

Green Accelerated Synthesis, Antimicrobial Activity and Seed Germination Test of Quaternary Ammonium Salts of 1,2-bis(4-pyridyl)ethane

A family of fifteen quaternary ammonium salts (QAs), bearing the 1,2-bis(4-pyridyl)ethane core, were obtained using for the first time two different green methods, such as microwave (MW) and ultrasounds (US) irradiation, with very good yields and in much shorter times compared to the classical method, and an assay on their antimicrobial action against Escherichia coli (E. coli) was carried out. While 12 to 24 hours were required for complete alkylation of 1,2-bis(4-pyridyl)ethane by reactive halogenated derivatives in anhydrous solvent under reflux conditions, MW and US irradiation reduced the reaction time and the desired products were achieved in a few min. One of the aims of this study was to evaluate the antibacterial potential of the synthesized QAs against pathogenic bacteria, along with their impact on germination activity of wheat seeds (Triticum aestivum L.). The antibacterial activity of the QAs against Escherichia coli was explored by determining the minimum inhibitory concentration (MIC). The MIC values varied from 0.312 to 2.5 mg/mL, highlighting the lowest values attained for the derivatives containing methoxy, chlorine and benzofurane functional groups. The viability of aerobic bacteria was determined with the Tetrazolium/Formazan Test, a method that was found to be the best alternative approach with respect to the difuzimetric method. Seeds of Triticum aestivum L. were used for the evaluation of the germination indicators, such as seed germination (SG), the relative seed germination (RSG), the relative radicle growth (RRG), and the seed germination index (GI). The toxicity studies of QAs 1, 4 and 7, at two different concentrations, showed no inhibitory effect on seed germination.

Microwrinkled pH-sensitive hydrogel films and their role on the cell adhesion/proliferation

In this work, hydrogels based on HEMA and DMAEMA (pH-sensitive monomer) were used to form biocompatible films which present microwrinkled patterns in their surface, with the focus of exploring the role of chemical composition on cell adhesion and proliferation. Three different pH (5.4, 7.4, and 8.3) were employed to prepare these hydrogels. The pre-polymerized hydrogel mixtures were deposited via spin coating, then exposed to vacuum for deswelling the films and finally, to UV-light to spontaneously generate the wrinkled pattern. By following this procedure, is possible to form a thin rigid layer on the top of the soft and incompletely polymerized hydrogel film which generates, in turn, a wrinkled pattern due to strain mismatch in the interface. FE-SEM and AFM micrographs allowed us to characterize the wrinkled pattern dimensions. The results evidenced that chemical composition is directly related to the surface pattern morphologies obtained, not so in the case of pH variation, which does not generate relevant changes in the pattern morphology. Interestingly, these pH variations resulted in significant alterations on the interface-cell interactions. More precisely, a premyoblastic cell monolayer was cultured over the wrinkled pattern, showing an optimal cell proliferation at neutral pH. Also, the variation of DMAEMA amount on the monomer feed composition employed for the preparation of the wrinkle surfaces revealed that a certain amount is required to favor cell attachment and growth.

Thermoresponsive Poly(N-Isopropylacrylamide-co-Dimethylaminoethyl Methacrylate) Microgel Aqueous Dispersions with Potential Antimicrobial Properties

The work herein describes the preparation of thermoresponsive microgels with potential antimicrobial properties. Most of the work performed so far regarding microgels with antimicrobial activity, deals with the ability of microgels to carry and release antibiotics or antimicrobial agents (antimicrobial peptides). The originality of this work lies in the possibility of developing intrinsic antimicrobial microgels by copolymerization of the well-known thermoresponsive monomer, N-isopropylacrylamide (NIPAM) with dimethylaminoethyl methacrylate (DMAEMA), a water-soluble monomer, to form microgels via precipitation polymerization (radical polymerization). Due to the presence of a tertiary amine in the DMAEMA comonomer, microgels can be modified by N-alkylation reaction with methyl and butyl iodide. This quaternization confers positive charges to the microgel surfaces and thus the potential antimicrobial activity. The effect of DMAEMA content and its quaternization with both, methyl and butyl iodide is evaluated in terms of thermal and surface charge properties, as well as in the microgel size and viscoelastic behavior. Finally, a preliminary study of the antimicrobial activity against different microorganisms is also performed in terms of minimum inhibitory concentration (MIC). From this study we determined that in contrast with butylated microgels, methylated ones show potential antimicrobial activity and good physical properties besides of maintaining microgel thermo-responsiveness.

Providing Antibacterial Activity to Poly(2-Hydroxy Ethyl Methacrylate) by Copolymerization with a Methacrylic Thiazolium Derivative

Antimicrobial polymers and coatings are potent types of materials for fighting microbial infections, and as such, they have attracted increased attention in many fields. Here, a series of antimicrobial copolymers were prepared by radical copolymerization of 2-hydroxyethyl methacrylate (HEMA), which is widely employed in the manufacturing of biomedical devices, and the monomer 2-(4-methylthiazol-5-yl)ethyl methacrylate (MTA), which bears thiazole side groups susceptible to quaternization, to provide a positive charge. The copolymers were further quantitatively quaternized with either methyl or butyl iodide, as demonstrated by nuclear magnetic resonance (NMR) and attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR). Then, the polycations were characterized by zeta potential measurements to evaluate their effective charge and by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) to evaluate their thermal properties. The ζ-potential study revealed that the quaternized copolymers with intermediate compositions present higher charges than the corresponding homopolymers. The cationic copolymers showed greater glass transition temperatures than poly(2-hydroxyethyl methacrylate) (PHEMA), with values higher than 100 °C, in particular those quaternized with methyl iodide. The TGA studies showed that the thermal stability of polycations varies with the composition, improving as the content of HEMA in the copolymer increases. Microbial assays targeting Gram-positive and Gram-negative bacteria confirmed that the incorporation of a low number of cationic units into PHEMA provides antimicrobial character with a minimum inhibitory concentration (MIC) of 128 µg mL-1. Remarkably, copolymers with MTA molar fractions higher than 0.50 exhibited MIC values as low as 8 µg mL-1.

Exploiting Macromolecular Design To Optimize the Antibacterial Activity of Alkylated Cationic Oligomers

There is growing interest in synthetic polymers which co-opt the structural features of naturally occurring antimicrobial peptides. However, our understanding of how macromolecular architecture affects antibacterial activity remains limited. To address this, we investigated whether varying architectures of a series of block and statistical co-oligomers influenced antibacterial and hemolytic activity. Cu(0)-mediated polymerization was used to synthesize oligomers constituting 2-(Boc-amino)ethyl acrylate units and either diethylene glycol ethyl ether acrylate (DEGEEA) or poly(ethylene glycol) methyl ether acrylate units with varying macromolecular architecture; subsequent deprotection produced primary amine functional oligomers. Further guanylation provided an additional series of antimicrobial candidates. Both chemical composition and macromolecular architecture were shown to affect antimicrobial activity. A broad spectrum antibacterial oligomer (containing guanidine moieties and DEGEEA units) was identified that possessed promising activity (MIC = 2 μg mL^-1) toward both Gram-negative and Gram-positive bacteria. Bacterial membrane permeabilization was identified as an important contributor to the mechanism of action.

Facially amphiphilic polyionene biocidal polymers derived from lithocholic acid

Bacterial infections have become a global issue that requires urgent attention, particularly regarding to emergence of multidrug resistant bacteria. We developed quaternary amine-containing antimicrobial poly(bile acid)s that contain a hydrophobic core of lithocholic acid in the main-chain. Interestingly, by choosing appropriate monomers, these cationic polymers can form core-shell micelles. These polymers exhibited biocidal activity against both Gram-positive and Gram-negative bacterial species. It is demonstrated that the micelles can deliver hydrophobic antibiotics that functionally have dual antimicrobial activities. Cytotoxicity assays against HeLa cells showed dosage-dependent toxicity for polymers with longer linkers.

Self-immolative polymers with potent and selective antibacterial activity by hydrophilic side chain grafting

Self-immolative polymers, which exert potent antibacterial activity with low hemolytic toxicity to red blood cells, are triggered to unzip into small molecules by a chemical stimulus.

Elaboration of antimicrobial polymeric materials by dispersion of well-defined amphiphilic methacrylic SG1-based copolymers

Towards a versatile and easy method of elaboration of solid polymeric antimicrobial materials.

Biomimetic antimicrobial polymers: recent advances in molecular design

The increasing prevalence of antibiotic-resistant bacterial infections, coupled with the decline in the number of new antibiotic drug approvals, has created a therapeutic gap that portends an emergent public health crisis.