Upconversion and Anti-Stokes Processes with f and d Ions in Solids

Impact of excitation pulse width on the upconversion luminescence lifetime of NaYF4:Yb3+,Er3+ nanoparticles

The upconversion luminescence (UCL) lifetime has a wide range of applications, serving as a critical parameter for optimizing the performance of upconversion nanoparticles (UCNPs) in various fields. It is crucial to understand that this lifetime does not directly correlate with the decay time of the emission level; rather, it represents a compilation of all the physical phenomena taking place in the upconversion process. To delve deeper into this, we analyzed the dependence of the UCL lifetime on the excitation pulse width for β-NaYF4:Yb3+,Er3+ nanoparticles. The results revealed a significant increase in the UCL lifetime with both the excitation pulse width and the excitation intensity. The laser fluence was identified as the parameter governing the UCL decay dynamics. We showcased the universality of the pulse-width-dependent UCL lifetime phenomenon by employing UCNPs of various sizes, surface coatings, host matrices, Yb3+ and Er3+ ratios, and dispersing UCNPs in different solvents. Theoretical explanations for the experimental findings were derived through a rate equation analysis. Finally, we discussed the implications of these results in UCNP-FRET (Förster resonance energy transfer)-based applications.

Enhancement of Vibrant Up-Conversion in (Ca,Sr)F2:Er,Yb,Al Phosphors via Energy Transfer, Localized Interstitial Distortion, and Au Nanostructures

A remarkable increase in the luminescent intensity of Er3+-doped CaF2 up-conversion phosphors was achieved, showing an approximate enhancement of over 1100-fold. This enhancement was realized by incorporating Yb3+, Al3+, Sr2+, and gold nanospheres and nanorods. The substantial improvement in up-converting luminescence effectively enhances sensitivity and efficiency at low excitation power densities. The up-conversion phosphors, consisting of (Ca,Sr)F2:Er,Yb,Al, were easily prepared using excess NH4F flux at 950 °C for 30 min. The structural confirmation of interstitial Al3+ ions within the CaF2 lattice was achieved through synchrotron powder X-ray powder diffraction. The significant enhancement of up-conversion emission and their mechanisms in the phosphors were vividly represented through energy transfer, interstitials and local distortions, and localized surface plasmon resonances when excited with a 980 nm diode laser.

Understanding of Lanthanide-Doped Core-Shell Structure at the Nanoscale Level

The groundbreaking development of lanthanide-doped core-shell nanostructures have successfully achieved precise optical tuning of rare-earth nanocrystals, leading to significant improvements in energy transfer efficiency and facilitating multifunctional integration. Exploring the atomic-level structural, physical, and optical properties of rare-earth core-shell nanocrystals is essential for advancing our understanding of their fundamental principles and driving the development of emerging applications. However, our knowledge of the atomic-level structural details of rare-earth nanocrystal core-shell structures remains limited. This review provides a comprehensive discussion of synthesis strategies, characterization techniques, interfacial ion-mixing phenomena, strain effects, and spectral modulation in core-shell structures of rare-earth-doped nanocrystals. Additionally, we prospectively discuss the challenges encountered in studying the fine structures of rare-earth-doped core-shell nanocrystals, particularly the increasing demand for researchers to integrate interdisciplinary knowledge and utilize high-end precision instruments.

Highly Sensitive Immunoassay for Long Forms of Cardiac Troponin T Using Upconversion Luminescence

BACKGROUND

Long cardiac troponin T (cTnT) has been proposed to be a promising and more specific biomarker of acute myocardial infarction (AMI). As it represents a subfraction of circulating cTnT, detection of very low concentrations is a requirement. The aim of this study was to develop a novel, highly sensitive immunoassay for long cTnT.

METHODS

A two-step sandwich-type immunoassay for long cTnT was developed, utilizing upconverting nanoparticles (UCNPs) as reporters. The limits of detection and quantitation were determined for the assay. Linearity and matrix effects were evaluated. Performance with clinical samples was assessed with samples from patients with non-ST elevation myocardial infarction (NSTEMI, n = 30) and end-stage renal disease (ESRD, n = 37) and compared to a previously developed time-resolved fluorescence (TRF)-based long cTnT assay and a commercial high-sensitivity cTnT assay.

RESULTS

The novel assay reached a 28-fold lower limit of detection (0.40 ng/L) and 14-fold lower limit of quantitation (1.79 ng/L) than the previously developed TRF long cTnT assay. Li-heparin and EDTA plasma, but not serum, were found to be suitable sample matrixes for the assay. In a receiver operating characteristics curve analysis, the troponin ratio (long/total cTnT) determined with the novel assay showed excellent discrimination between NSTEMI and ESRD with an area under the curve of 0.986 (95% CI, 0.967-1.000).

CONCLUSIONS

By utilizing upconversion luminescence technology, we developed a highly sensitive long cTnT assay. This novel assay can be a valuable tool for investigating the full potential of long cTnT as a biomarker for AMI. ClinicalTrials.gov Registration Number: NCT04465591.

Modification of a desktop FFF printer via NIR laser addition for upconversion 3D printing

Traditional photopolymer-based 3D printing methods require sequential printing of thin layers, due to short penetration depths of UV or blue light sources used by these techniques. In contrast, upconversion 3D printing circumvents the layer-by-layer limitation by taking advantage of upconversion luminescence processes and the high penetration depths offered by near-infrared (NIR) lasers, allowing for selective crosslinking of voxels at any depth or position within the resin container. The implementation of this technique required the construction of a 3D printer with the ability of focusing the laser on any point of the space. For this, a low-cost fused filament fabrication (FFF) printer was modified by incorporating a 980 nm laser and laser control circuit. The total cost of the parts required for modification was £180. With enhanced penetration depths up to 5.8 cm, this method also allows for printing inside or through existing 3D printed parts. This opens doors for restoration of broken items, in situ bioprinting, 3D-circuitry, and notably, 3D printing inside cavities of a different material, illustrating numerous opportunities for practical applications.

A review of biomolecules conjugated lanthanide up-conversion nanoparticles-based fluorescence probes in food safety and quality monitoring applications

Upconversion nanoparticles (UCNPs) are known to possess unique characteristics, which allow them to overcome a number of issues that plague traditional fluorescence probes. UCNPs have been employed in a variety of applications, but it is arguably in the realm of optical sensors where they have shown the most promise. Biomolecule conjugated UCNPs-based fluorescence probes have been developed to detect and quantify a wide range of analytes, from metal ions to biomolecules, with great specificity and sensitivity. In this review, we have given much emphasis on the recent trends and progress in the preparation strategies of bioconjugated UCNPs and their potential application as fluorescence sensors in the trace level detection of food industry-based toxicants and adulterants. The paper discusses the preparation and functionalisation strategies of commonly used biomolecules over the surface of UCNPs. The use of different sensing strategies namely heterogenous and homogenous assays, underlying fluorescence mechanisms in the detection process of food adulterants are summarized in detail. This review might set a precedent for future multidisciplinary research including the development of novel biomolecules conjugated UCNPs for potential applications in food science and technology.

Effect of Surface Modification on the Luminescence of Individual Upconversion Nanoparticles

Lanthanide-doped upconversion nanoparticles (UCNPs) hold promise for single-molecule imaging owing to their excellent photostability and minimal autofluorescence. However, their limited water dispersibility, often from the hydrophobic oleic acid ligand during synthesis, is a challenge. To address this, various surface modification strategies' impact on single-particle upconversion luminescence are studied. UCNPs are made hydrophilic through methods like ligand exchange with dye IR806, HCl or NOBF4 treatment, silica coating (SiO2 or mesoporous mSiO2), and self-assembly with polymer of DSPE-PEG or F127. The studies revealed that UCNPs modified with NOBF4 and DSPE-PEG exhibited notably higher single-particle brightness with minimal quenching (3% and 8%, respectively), followed by SiO2, F127, IR806, mSiO2, and HCl (84% quenching). HCl disrupted UCNPs's crystal lattice, weakening luminescence, while mSiO2 absorbed solvent molecules, causing luminescence quenching. Energy transfer to IR806 also reduced the brightness. Additionally, a prevalence of upconversion red emission over green is observed, with the red-to-green ratio increasing with irradiance. UCNPs coated with DSPE-PEG exhibited the brightest single-particle luminescence in water, retaining 48% of its original emission due to a lower critical micelle concentration and superior water protection. In summary, the investigation provides valuable insights into the role of surface chemistry on UCNPs at the single-particle level.

Luminescence enhancement through co-sensitization in lanthanide composites for efficient photocatalysis

Lanthanide-doped nanocrystals that convert near-infrared (NIR) irradiation into shorter wavelength emission (ultraviolet-C) offer many exciting opportunities for biomedicine, bioimaging, and environmental catalysis. However, developing lanthanide-doped nanocrystals with high UVC brightness for efficient photocatalysis is a formidable challenge due to the complexity of the multiphoton process. Here, we report a series of heterogeneous core-multishell structures based on a co-sensitization strategy with multi-band enhanced emission profiles under 980 nm excitation. Interestingly, the multiphoton processes involving two to six-photon upconversion are highly promoted via a co-sensitization strategy. More importantly, through growth layers of TiO2 and CdS photocatalysts, these lanthanide nanocomposites with efficient multi-upconverted emission show efficient photocatalytic activity. This study provides a new perspective for mechanistic understanding of multiphoton processes in heterostructures and also offers exciting opportunities for highly efficient photocatalytic applications.

Single-particle Förster resonance energy transfer from upconversion nanoparticles to organic dyes

Single-particle detection and sensing, powered by Förster resonance energy transfer (FRET), offers precise monitoring of molecular interactions and environmental stimuli at a nanometric resolution. Despite its potential, the widespread use of FRET has been curtailed by the rapid photobleaching of traditional fluorophores. This study presents a robust single-particle FRET platform utilizing upconversion nanoparticles (UCNPs), which stand out for their remarkable photostability, making them superior to conventional organic donors for energy transfer-based assays. Our comprehensive research demonstrates the influence of UCNPs' size, architecture, and dye selection on the efficiency of FRET. We discovered that small particles (∼14 nm) with a Yb3+-enriched outermost shell exhibit a significant boost in FRET efficiency, a benefit not observed in larger particles (∼25 nm). 25 nm UCNPs with an inert NaLuF4 shell demonstrated a comparable level of emission enhancement via FRET as those with a Yb3+-enriched outermost shell. At the single-particle level, these FRET-enhanced UCNPs manifested an upconversion green emission intensity that was 8.3 times greater than that of their unmodified counterparts, while maintaining notable luminescence stability. Our upconversion FRET system opens up new possibilities for developing more effective high-brightness, high-sensitivity single-particle detection, and sensing modalities.

Comparison of the Differences between Two-Photon Excitation, Upconversion, and Conventional Photodynamic Therapy on Cancers in In Vitro and In Vivo Studies

Photodynamic therapy (PDT) is a minimally invasive treatment for several diseases. It combines light energy with a photosensitizer (PS) to destroy the targeted cells or tissues. A PS itself is a non-toxic substance, but it becomes toxic to the target cells through the activation of light at a specific wavelength. There are some limitations of PDT, although it has been used in clinical studies for a long time. Two-photon excitation (TPE) and upconversion (UC) for PDT have been recently developed. A TPE nanoparticle-based PS combines the advantages of TPE and nanotechnology that has emerged as an attractive therapeutic agent for near-infrared red (NIR) light-excited PDT, whilst UC is also used for the NIR light-triggered drug release, activation of 'caged' imaging, or therapeutic molecules during PDT process for the diagnosis, imaging, and treatment of cancers.

METHODS

Nine electronic databases were searched, including WanFang Data, PubMed, Science Direct, Scopus, Web of Science, Springer Link, SciFinder, and China National Knowledge Infrastructure (CNKI), without any language constraints. TPE and UCNP were evaluated to determine if they had different effects from PDT on cancers. All eligible studies were analyzed and summarized in this review.

RESULTS

TPE-PDT and UCNP-PDT have a high cell or tissue penetration ability through the excitation of NIR light to activate PS molecules. This is much better than the conventional PDT induced by visible or ultraviolet (UV) light. These studies showed a greater PDT efficacy, which was determined by enhanced generation of reactive oxygen species (ROS) and reduced cell viability, as well as inhibited abnormal cell growth for the treatment of cancers.

CONCLUSIONS

Conventional PDT involves Type I and Type II reactions for the generation of ROS in the treatment of cancer cells, but there are some limitations. Recently, TPE-PDT and UCNP-PDT have been developed to overcome these problems with the help of nanotechnology in in vitro and in vivo studies.

Yb-to-Eu Cooperative Sensitization Upconversion in a Multifunctional Molecular Nonanuclear Lanthanide Cluster in Solution

Lanthanide metal clusters excel in combining molecular and material chemistry properties. Here, we report an efficient cooperative sensitization UC phenomenon of a Eu3+/Yb3+ nonanuclear lanthanide cluster in CD3OD. The synthesis and characterization of the heteronuclear cluster in the solid state and solution are described together with the UC phenomenon showing Eu3+ luminescence in the visible region upon 980 nm NIR excitation of Yb3+ at concentrations as low as 100 nM. Alongside being the Eu/Yb cluster to display UC (with a quantum yield value of 4.88 × 10-8 upon 1.13 W cm-2 excitation at 980 nm), the cluster exhibits downshifted light emission of Yb3+ in the NIR region upon 578 nm visible excitation of Eu3+, which is ascribed to sensitization pathways for Yb through the 5D0 energy levels of Eu3+. Additionally, a faint emission is also observed at ca. 500 nm upon 980 nm excitation, originating from the cooperative luminescence of Yb3+. The [Eu8Yb(BA)16(OH)10]Cl cluster (BA = benzoylacetonate) is also a field-induced single-molecular magnet (SMM) under 4K with a modest Ueff/kB of 8.48 K, thereby joining the coveted list of Yb-SMMs and emerging as a prototype system for next-generation devices, combining luminescence with single-molecular magnetism in a molecular cluster.

Toxicity of Large and Small Surface-Engineered Upconverting Nanoparticles for In Vitro and In Vivo Bioapplications

In this study, spherical or hexagonal NaYF4:Yb,Er nanoparticles (UCNPs) with sizes of 25 nm (S-UCNPs) and 120 nm (L-UCNPs) were synthesized by high-temperature coprecipitation and subsequently modified with three kinds of polymers. These included poly(ethylene glycol) (PEG) and poly(N,N-dimethylacrylamide-co-2-aminoethylacrylamide) [P(DMA-AEA)] terminated with an alendronate anchoring group, and poly(methyl vinyl ether-co-maleic acid) (PMVEMA). The internalization of nanoparticles by rat mesenchymal stem cells (rMSCs) and C6 cancer cells (rat glial tumor cell line) was visualized by electron microscopy and the cytotoxicity of the UCNPs and their leaches was measured by the real-time proliferation assay. The comet assay was used to determine the oxidative damage of the UCNPs. An in vivo study on mice determined the elimination route and potential accumulation of UCNPs in the body. The results showed that the L- and S-UCNPs were internalized into cells in the lumen of endosomes. The proliferation assay revealed that the L-UCNPs were less toxic than S-UCNPs. The viability of rMSCs incubated with particles decreased in the order S-UCNP@Ale-(PDMA-AEA) > S-UCNP@Ale-PEG > S-UCNPs > S-UCNP@PMVEMA. Similar results were obtained in C6 cells. The oxidative damage measured by the comet assay showed that neat L-UCNPs caused more oxidative damage to rMSCs than all coated UCNPs while no difference was observed in C6 cells. An in vivo study indicated that L-UCNPs were eliminated from the body via the hepatobiliary route; L-UCNP@Ale-PEG particles were almost eliminated from the liver 96 h after intravenous application. Pilot fluorescence imaging confirmed the limited in vivo detection capabilities of the nanoparticles.

Cold-Responsive Hyaluronated Upconversion Nanoplatform for Transdermal Cryo-Photodynamic Cancer Therapy

Cryotherapy leverages controlled freezing temperature interventions to engender a cascade of tumor-suppressing effects. However, its bottleneck lies in the standalone ineffectiveness. A promising strategy is using nanoparticle therapeutics to augment the efficacy of cryotherapy. Here, a cold-responsive nanoplatform composed of upconversion nanoparticles coated with silica - chlorin e6 - hyaluronic acid (UCNPs@SiO2-Ce6-HA) is designed. This nanoplatform is employed to integrate cryotherapy with photodynamic therapy (PDT) in order to improve skin cancer treatment efficacy in a synergistic manner. The cryotherapy appeared to enhance the upconversion brightness by suppressing the thermal quenching. The low-temperature treatment afforded a 2.45-fold enhancement in the luminescence of UCNPs and a 3.15-fold increase in the photodynamic efficacy of UCNPs@SiO2-Ce6-HA nanoplatforms. Ex vivo tests with porcine skins and the subsequent validation in mouse tumor tissues revealed the effective HA-mediated transdermal delivery of designed nanoplatforms to deep tumor tissues. After transdermal delivery, in vivo photodynamic therapy using the UCNPs@SiO2-Ce6-HA nanoplatforms resulted in the optimized efficacy of 79% in combination with cryotherapy. These findings underscore the Cryo-PDT as a truly promising integrated treatment paradigm and warrant further exploring the synergistic interplay between cryotherapy and PDT with bright upconversion to unlock their full potential in cancer therapy.

Upconversion nanoparticles-modified aptasensors for highly sensitive mycotoxin detection for food quality and safety

Mycotoxins, highly toxic and carcinogenic secondary metabolites produced by certain fungi, pose significant health risks as they contaminate food and feed products globally. Current mycotoxin detection methods have limitations in real-time detection capabilities. Aptasensors, incorporating aptamers as specific recognition elements, are crucial for mycotoxin detection due to their remarkable sensitivity and selectivity in identifying target mycotoxins. The sensitivity of aptasensors can be improved by using upconversion nanoparticles (UCNPs). UCNPs consist of lanthanide ions in ceramic host, and their ladder-like energy levels at f-orbitals have unique photophysical properties, including converting low-energy photons to high-energy emissions by a series of complex processes and offering sharp, low-noise, and sensitive near-infrared to visible detection strategy to enhance the efficacy of aptasensors for novel mycotoxin detection. This article aims to review recent reports on the scope of the potential of UCNPs in mycotoxin detection, focusing on their integration with aptasensors to give readers clear insight. We briefly describe the upconversion photoluminescence (UCPL) mechanism and relevant energy transfer processes influencing UCNP design and optimization. Furthermore, recent studies and advancements in UCNP-based aptasensors will be reviewed. We then discuss the potential impact of UCNP-modified aptasensors on food safety and present an outlook on future directions and challenges in this field. This review article comprehensively explains the current state-of-the-art UCNP-based aptasensors for mycotoxin detection. It provides insights into potential applications by addressing technical and practical challenges for practical implementation.

Comparison of Blue and Infrared Light Transmission Through Dental Tissues and Restorative Materials

OBJECTIVES

The depth of cure using blue-light photocuring units (BL) is limited by tooth structure and qualities of the restorative material through which the activating wavelength must pass. Recent developments incorporate an infrared (IR) activated upconversion (UC) fluorescence of a lining agent filled with nanocrystals of NaYF4 and doped with YB+3 and Tm+3 that emit both blue and violet light locally at the interface of the liner and restorative resin. The purpose of this study was to evaluate the BL and 975 nm infrared (IR) light power transmission through dental tissues and restorative materials.

METHODS AND MATERIALS

Power transmissions of the IR laser (975 nm) and a monowave blue-only light-curing unit (Bluephase 16i) through dental tissues (enamel, dentin, and enamel/dentin junction, or DEJ), eight (8) various dental resin composites, and eight (8) dental ceramics, each at four thicknesses (1, 2, 3 and 4 mm) were evaluated (n=5) using a thermopile sensor (PM10, Coherent Inc) connected to a laser power meter (Fieldmate, Coherent Inc). Power transmission values of each light source and restorative material were subjected to analysis of variance and Tukey test at a pre-set alpha of 0.05.

RESULTS

A linear correlation (r=0.9884) between the supplied current and emitted IR power of the laser diode was found, showing no statistical power reduction with increased distances (collimated beam). For tooth tissues, the highest power transmissions for both light sources were observed using 1.0 mm enamel while the lowest values were found for 2.0 mm dentin and an association of 2.0 mm DEJ and 1.0 mm dentin. The only group where IR demonstrated significantly higher transmission when compared to BL was 1.0 mm enamel. For all resin composites and dental ceramics, increased thickness resulted in a reduction of IR power transmission (except for EverX Posterior fiber-reinforced composite and e.max HT ceramic). IR resulted in higher transmission through all resin composites, except for Tetric EvoCeram White. The highest BL transmission was observed for SDR Flow, at all thicknesses. Higher IR/BL ratios were observed for EverX Posterior, Herculite Ultra, and Lava Ultimate, while the lowest ratio was observed for Tetric EvoCeram White. Reduced translucency shades within the same material resulted in lower power ratio values, especially for BL transmission. Higher IR/BL ratios were observed for e.Max LT, VitaVM7 Base Dentin, and e.max CAD HT, while the lowest values were found for VitaVM7 Enamel and Paradigm C.

CONCLUSION

IR power transmission through enamel was higher when compared to blue light, while no difference was observed for dentin. The power transmission of IR was higher than BL for resin composites, except for a high value and low chroma shade. Fiber-reinforced resin composite demonstrated the highest IR/BL power transmission ratio. A greater IR/BL ratio was observed for lower translucency ceramics when compared to high translucency.

Amplifying Photon Upconversion in Alloyed Nanoparticles for a Near-Infrared Photodetector

Photon upconverison has attracted a substantial amount of interest in diverse fields due to its characteristic anti-Stokes emissions. However, obtaining intense emission under low-power laser irradiation has remained a challenge. Here we report a mechanistic design of activator-sensitizer alloyed nanoparticles to achieve bright upconversion under weak infrared irradiation. This design allows a nearest sensitizer-activator separation to facilitate efficient energy transfer that results in remarkably enhanced upconversion (>2 orders of magnitude) under 0.26 W cm-2 irradiation compared to that of the Er sublattice, and the upconversion quantum yield also shows a 20-fold increase. Interestingly, the alloyed nanoparticles exhibit a gradual change in emission color with an increase in Yb3+ content, and moreover, their emission colors can be dynamically controlled by simply modulating the excitation laser power and pulse widths. Such alloyed nanoparticles show great promise for application in a near-infrared photodetector.

Impact of Lanthanide (Nd3+, Gd3+, and Yb3+) Ionic Field Strength on the Structure and Thermal Expansion of Phosphate Glasses

Phosphate glasses containing Nd3+, Gd3+, and Yb3+ as lanthanide ions are attractive for applications in laser materials, phototherapy lamps, and solar spectral converters. The composition-structure-property relation in this type of glass system is thus of interest from fundamental and applied perspectives. In this work, the impact of the differing ionic radius of Nd3+, Gd3+, and Yb3+ and consequent field strength on the physical properties of phosphate glasses is investigated, focusing ultimately on thermal expansion effects. The glasses were made by melting with a fixed concentration of the lanthanide ions having 50P2O5-46BaO-4Ln2O3 nominal compositions (mol %) with Ln = Nd, Gd, and Yb. The investigation encompassed measurements by X-ray diffraction (XRD), optical spectroscopy, density, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and dilatometry. XRD supported the amorphous nature of the glasses, whereas absorption and photoluminescence spectra showed the optical features of the Nd3+, Gd3+, and Yb3+ ions in the glasses. Oxygen speciation by XPS indicated an increase in nonbridging oxygens for the larger radii Nd3+ and Gd3+ ions relative to the host, contrasting with Yb3+. Phosphorus XPS analysis further supported the hypothesis that the P 2p binding energies of the glasses increased with the cation field strength of the lanthanides. The Raman spectra were interpreted based on glass depolymerization effects and the impact of Ln3+ ions with high field strength. Particularly, the band position of the symmetric out-of-chain nonbridging oxygen stretch, νs(PO2-), shifted to higher frequencies correlating with the Ln3+ field strength. Dilatometry ultimately revealed a steady decrease in the coefficient of thermal expansion for the glasses, which correlated linearly with Ln3+ field strengths and thus indicated to sustain increased glass rigidities. The various analyses performed thus illuminated the structural foundation of the thermomechanical behavior of the glasses connected with changes in the Ln3+ field strengths.

Light-responsive polymeric nanoparticles for retinal drug delivery: design cues, challenges and future perspectives

A multitude of sight-threatening retinal diseases, affecting hundreds of millions around the globe, lack effective pharmacological treatments due to ocular barriers and common drug delivery limitations. Polymeric nanoparticles (PNPs) are versatile drug carriers with sustained drug release profiles and tunable physicochemical properties which have been explored for ocular drug delivery to both anterior and posterior ocular tissues. PNPs can incorporate a wide range of drugs and overcome the challenges of conventional retinal drug delivery. Moreover, PNPs can be engineered to respond to specific stimuli such as ultraviolet, visible, or near-infrared light, and allow precise spatiotemporal control of the drug release, enabling tailored treatment regimens and reducing the number of required administrations. The objective of this study is to emphasize the therapeutic potential of light-triggered drug-loaded polymeric nanoparticles to treat retinal diseases through an exploration of ocular pathologies, challenges in drug delivery, current production methodologies and recent applications. Despite challenges, light-responsive PNPs hold the promise of substantially enhancing the treatment landscape for ocular diseases, aiming for an improved quality of life for patients.

Development of excitation power-responsive anti-stokes emission wavelength switching and their energy saving induced by localized surface plasmon resonance

We designed an external stimulus-responsive anti-Stokes emission switching using dual-annihilator-based triplet-triplet annihilation upconversion systems. This system, which was constructed by incorporating a palladium porphyrin derivative as a sensitizer and 9,10-diphenylanthracene (DPA) and 9,10-bis(triisopropylsilyl)ethynylanthracene (TIPS) as annihilators into polymer thin films, produced TIPS- and DPA-based anti-Stokes emission under low and high excitation powers, respectively. The mechanism involves the following: under low excitation power, triplet energy transfer from triplet-excited PdOEP to DPA is induced, followed by relay to TIPS. This results in the generation of triplet-excited TIPS, and the subsequent triplet-triplet annihilation between them produces TIPS-based anti-Stokes emission. Conversely, under high excitation power, the high-density triplet-excited DPA, generated through triplet energy transfer from PdOEP, undergoes triplet-triplet annihilation among themselves, resulting in the generation of DPA-based anti-Stokes emission. Additionally, we achieved energy savings by reducing the required excitation power for switching through the utilization of plasmonic metal nanoparticles. The strong local electromagnetic fields associated with the localized surface plasmon resonance of metal nanoparticles enhance the photoexcitation efficiency of PdOEP, subsequently increasing the density of triplet-excited DPA. As a result, anti-Stokes emission switching becomes feasible at lower excitation powers.

Optical nanomaterial-based detection of biomarkers in liquid biopsy

Liquid biopsy, which is a minimally invasive procedure as an alternative to tissue biopsy, has been introduced as a new diagnostic/prognostic measure. By screening disease-related markers from the blood or other biofluids, it promises early diagnosis, timely prognostication, and effective treatment of the diseases. However, there will be a long way until its realization due to its conceptual and practical challenges. The biomarkers detected by liquid biopsy, such as circulating tumor cell (CTC) and circulating tumor DNA (ctDNA), are extraordinarily rare and often obscured by an abundance of normal cellular components, necessitating ultra-sensitive and accurate detection methods for the advancement of liquid biopsy techniques. Optical biosensors based on nanomaterials open an important opportunity in liquid biopsy because of their enhanced sensing performance with simple and practical properties. In this review article, we summarized recent innovations in optical nanomaterials to demonstrate the sensitive detection of protein, peptide, ctDNA, miRNA, exosome, and CTCs. Each study prepares the optical nanomaterials with a tailored design to enhance the sensing performance and to meet the requirements of each biomarker. The unique optical characteristics of metallic nanoparticles (NPs), quantum dots, upconversion NPs, silica NPs, polymeric NPs, and carbon nanomaterials are exploited for sensitive detection mechanisms. These recent advances in liquid biopsy using optical nanomaterials give us an opportunity to overcome challenging issues and provide a resource for understanding the unknown characteristics of the biomarkers as well as the mechanism of the disease.

Targeted Single Particle Tracking with Upconverting Nanoparticles

Single particle tracking (SPT) is a powerful technique for real-time microscopic visualization of the movement of individual biomolecules within or on the surface of living cells. However, SPT often suffers from the suboptimal performance of the photon-emitting labels used to tag the biomolecules of interest. For example, fluorescent dyes have poor photostability, while quantum dots suffer from blinking that hampers track acquisition and interpretation. Upconverting nanoparticles (UCNPs) have recently emerged as a promising anti-Stokes luminescent label for SPT. In this work, we demonstrated targeted SPT using UCNPs. For this, we synthesized 30 nm diameter doped UCNPs and coated them with amphiphilic polymers decorated with polyethylene glycol chains to make them water-dispersible and minimize their nonspecific interactions with cells. Coated UCNPs highly homogeneous in brightness (as confirmed by a single particle investigation) were functionalized by immunoglobulin E (IgE) using a biotin-streptavidin strategy. Using these IgE-UCNP SPT labels, we tracked high-affinity IgE receptors (FcεRI) on the membrane of living RBL-2H3 mast cells at 37 °C in the presence and absence of antigen and obtained good agreement with the literature. Moreover, we used the FcεRI-IgE receptor-antibody system to directly compare the performance of UCNP-based SPT labels to organic dyes (AlexaFluor647) and quantum dots (QD655). Due to their photostability as well as their backgroundless and continuous luminescence, SPT trajectories obtained with UCNP labels are no longer limited by the photophysics of the label but only by the dynamics of the system and, in particular, the movement of the label out of the field of view and/or focal plane.

Improved sensitivity and automation of a multi-step upconversion lateral flow immunoassay using a 3D-printed actuation mechanism

The development of sensitive point-of-care (POC) assay platforms is of interest for reducing the cost and time of diagnostics. Lateral flow assays (LFAs) are the gold standard for POC systems, but their sensitivity as such is inadequate, for example, in the case of cardiac diagnostics. The performance can be improved by incorporating different steps, such as pre-incubation to prolong the interaction time between sample and reporter for immunocomplex formation, and washing steps for background reduction. However, for POC assays, manual steps by the assay conductor are not desired. In this research, upconverting nanoparticles (UCNPs) were coated with poly(acrylic acid) (PAA) and conjugated to anti-cTnI antibodies, yielding non-clustering particles with low non-specific binding. The performance of cTnI-LFA in the PAA-anti-cTnI-UCNPs was compared to the same UCNPs with a commercial carboxyl surface. A kitchen-timer mechanism was embedded in a 3D-printed housing to produce a low-cost actuator facilitating a timed pre-incubation step for reporter and sample, and a washing step, to enable a multi-step cTnI-LFA with minimized manual labour. PAA-UCNPs showed improved mobility on nitrocellulose compared to those with a commercial surface. The mechanical actuator system was shown to improve sensitivity compared to a labour-intensive multi-step dipstick method, despite pre-incubation occurring during shaking and heating in the dipstick method. The limit of detection decreased from 7.6 to 1.5 ng/L cTnI in human plasma. The presented actuator can be easily modified for sensitivity improvement in the LFA for different analytes via pre-incubation and washing steps.

Upconverting photons at the molecular scale with lanthanide complexes

In this perspective, we summarise the major milestones to date in the field of molecular upconversion (UC) with lanthanide based coordination complexes. This begins from the leap firstly from solid-state to nanoparticular regimes, and further down the scale to the molecular domain. We explain the mechanistic intricacies of each differing way of generating upconverted photons, critiquing them and outlining our views on the benefits and limitations of each process, also offering our perspective and opinion on where these new molecular UC edifices will take us. This nascent area is already rapidly expanding and improving, having increased in luminance efficiency by more than four orders of magnitude in the last decade: we conclude that the future is bright for molecular UC.

Upconversion Nanoparticles Based Sensing: From Design to Point-of-Care Testing

Rare earth-doped upconversion nanoparticles (UCNPs) have achieved a wide range of applications in the sensing field due to their unique anti-Stokes luminescence property, minimized background interference, excellent biocompatibility, and stable physicochemical properties. However, UCNPs-based sensing platforms still face several challenges, including inherent limitations from UCNPs such as low quantum yields and narrow absorption cross-sections, as well as constraints related to energy transfer efficiencies in sensing systems. Therefore, the construction of high-performance UCNPs-based sensing platforms is an important cornerstone for conducting relevant research. This work begins by providing a brief overview of the upconversion luminescence mechanism in UCNPs. Subsequently, it offers a comprehensive summary of the sensors' types, design principles, and optimized design strategies for UCNPs sensing platforms. More cost-effective and promising point-of-care testing applications implemented based on UCNPs sensing systems are also summarized. Finally, this work addresses the future challenges and prospects for UCNPs-based sensing platforms.

Thermal properties of nanofluids using hydrophilic and hydrophobic LiYF4:Yb/Er upconverting nanoparticles

Luminescent nanoparticles have shown great potential for thermal sensing in bio-applications. Nonetheless, these materials lack water dispersibility that can be overcome by modifying their surface properties with water dispersible molecules such as cysteine. Herein, we employ LiYF4:Er3+/Yb3+ upconverting nanoparticles (UCNPs) capped with oleate or modified with cysteine dispersed in cyclohexane or in water, respectively, as thermal probes. Upconversion emission was used to sense temperature with a relative thermal sensitivity of ∼1.24% K-1 (at 300 K) and a temperature uncertainty of 0.8 K for the oleate capped and of 0.5 K for cysteine modified NPs. To study the effect of the cysteine modification in the heat transfer processes, the thermal conductivity of the nanofluids was determined, yielding 0.123(6) W m-1 K-1 for the oleate capped UCNPs dispersed in cyclohexane and 0.50(7) W m-1 K-1 for the cysteine modified UCNPs dispersed in water. Moreover, through the heating curves, the nanofluids' thermal resistances were estimated, showing that the cysteine modification partially prevents heat transfer.

Three-dimensional, dual-color nanoscopy enabled by migrating photon avalanches with one single low-power CW beam

The development of super-resolution fluorescence microscopy is very essential for understanding the physical and biological fundamentals at nanometer scale. However, to date most super-resolution modalities require either complicated/costly purpose-built systems such as multiple-beam architectures or complex post-processing procedures with intrinsic artifacts. Achieving three-dimensional (3D) or multi-channel sub-diffraction microscopic imaging using a simple method remains a challenging and struggling task. Herein, we proposed 3D highly-nonlinear super-resolution microscopy using a single-beam excitation strategy, and the microscopy principle was modelled and studied based on the ultrahigh nonlinearity enabled by photon avalanches. According to the simulation, the point spread function of highly nonlinear microscopy is switchable among different modes and can shrink three-dimensionally to sub-diffraction scale at the photon avalanche mode. Experimentally, we demonstrated 3D optical nanoscopy assisted with huge optical nonlinearities in a simple laser scanning configuration, achieving a lateral resolution down to 58 nm (λ/14) and an axial resolution down to 185 nm (λ/5) with one single beam of low-power, continuous-wave, near-infrared laser. We further extended the photon avalanche effect to many other emitters to develop multi-color photon avalanching nanoprobes based on migrating photon avalanche mechanism, which enables us to implement single-beam dual-color sub-diffraction super-resolution microscopic imaging.

Tetherless Optical Neuromodulation: Wavelength from Orange-red to Mid-infrared

Optogenetics, a technique that employs light for neuromodulation, has revolutionized the study of neural mechanisms and the treatment of neurological disorders due to its high spatiotemporal resolution and cell-type specificity. However, visible light, particularly blue and green light, commonly used in conventional optogenetics, has limited penetration in biological tissue. This limitation necessitates the implantation of optical fibers for light delivery, especially in deep brain regions, leading to tissue damage and experimental constraints. To overcome these challenges, the use of orange-red and infrared light with greater tissue penetration has emerged as a promising approach for tetherless optical neuromodulation. In this review, we provide an overview of the development and applications of tetherless optical neuromodulation methods with long wavelengths. We first discuss the exploration of orange-red wavelength-responsive rhodopsins and their performance in tetherless optical neuromodulation. Then, we summarize two novel tetherless neuromodulation methods using near-infrared light: upconversion nanoparticle-mediated optogenetics and photothermal neuromodulation. In addition, we discuss recent advances in mid-infrared optical neuromodulation.

Beam-profile compensation for quantum yield characterisation of Yb-Tm codoped upconverting nanoparticles emitting at 474 nm, 650 nm and 804 nm

Upconverting nanoparticles (UCNPs) have found widespread applications in biophotonics and energy harvesting due to their unique non-linear optical properties arising from energy transfer upconversion (ETU) mechanisms. However, accurately characterising the power density-dependent efficiency of UCNPs using the internal quantum yield (iQY) is challenging due to the lack of methods that account for excitation beam-profile distortions. This limitation hinders the engineering of optimal UCNPs for diverse applications. To address this, this work present a novel beam profile compensation strategy based on a general analytical rate-equations model, enabling the evaluation of iQY for ETU processes of arbitrary order, such as ETU2, ETU3, and beyond. The method was applied to characterise the ETU2 and ETU3 processes corresponding to the main emission peaks (474 nm, 650 nm, and 804 nm) of a Yb-Tm codoped core-shell β-UCNP. Through this approach, the transition power density points (which delimit the distinct non-linear regimes of the upconversion luminescence (UCL)), and the saturation iQY values (which are reached at high excitation power densities above the transition points) were determined. The ETU2 process exhibits a single transition power density point, denoted as ρ2, while the ETU3 processes involve two transition points, ρ2 and ρ3. By compensating for the beam profile, we evaluate the iQY of individual lines across a wide dynamic range of excitation power densities (up to 105 W cm-2), encompassing both non-linear and linear regimes of UCL. This study introduces a valuable approach for accurately characterising the iQY of UCNPs, facilitating a deeper understanding of the upconversion and its performance. By addressing excitation beam-profile distortions, this method provides a comprehensive and reliable assessment of the power density-dependent iQY. The results highlight the applicability and effectiveness of this beam profile compensation strategy, which can be employed for a wide range of UCNPs. This advancement opens new avenues for the tailored design and application of UCNPs in various fields, especially for biophotonics.

Biaxial strain tuned upconversion photoluminescence of monolayer WS2

Monolayer tungsten disulfide (1L-WS2) is a direct bandgap atomic-layered semiconductor material with strain tunable optical and optoelectronic properties among the monolayer transition metal dichalcogenides (1L-TMDs). Here, we demonstrate biaxial strain tuned upconversion photoluminescence (UPL) from exfoliated 1L-WS2 flakes transferred on a flexible polycarbonate cruciform substrate. When the biaxial strain applied to 1L-WS2 increases from 0 to 0.51%, it is observed that the UPL peak position is redshifted by up to 60 nm/% strain, while the UPL intensity exhibits exponential growth with the upconversion energy difference varying from - 303 to - 120 meV. The measured power dependence of UPL from 1L-WS2 under biaxial strain reveals the one photon involved multiphonon-mediated upconversion mechanism. The demonstrated results provide new opportunities in advancing TMD-based optical upconversion devices for future flexible photonics and optoelectronics.

Cyclopentene ring effects in cyanine dyes: a handle to fine-tune photophysical properties

The aim of this study is to investigate the photophysical properties of a cyanine dye analogue by performing first-principles calculations based on density functional theory (DFT) and time dependent-DFT. Cationic cyanine dyes are the subject of great importance due to their versatile applications and the tunability of their photophysical properties, such as by modifying their end groups and chain length. An example of this is the vinylene shift, which is experimentally known for these molecules, and it consists of a bathochromic (red) shift of approximately 100 nm of the 0-0 vibronic transition when a vinyl group is added to the polymethine chain. Our study shows that when the saturated moiety C2H4 of the cyclopentene ring is added to the chain, it interacts with the conjugated π-system, resulting in a smaller HOMO-LUMO gap. Here, we demonstrate the origin of this interaction and how it can be used to fine tune the absorption energies of this class of dyes.

Upconversion Luminescence Properties of Pr3+-Doped BaYF5 Nanoparticles Prepared by Microwave Hydrothermal Method

Pure and Pr3+-doped BaYF5 nanoparticles were synthesized by the microwave hydrothermal method. The nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and optical spectroscopy. The XRD and TEM confirm that the average size of nanoparticles is in the range of 26-37 nm. The optical excitation and luminescence spectra of BaYF5:Pr3+ nanoparticles are presented in the visible and ultraviolet (UV) range. It has been verified that Pr3+ ions are capable of emitting UV-C photons when excited by a 444 nm laser. This emission arises from a two-photon energy-transfer upconversion mechanism. The concentration dependence of the upconversion luminescence of BaYF5:Pr3+ was studied.

Estimation of the proximal temperature rise of an excited upconversion particle by detecting the wavefront of emission

Monitoring the temperature distribution within a local environment at the micro and nanoscale is vital as many processes are solely thermal. Various thermometric techniques have been explored in the community, and out of these, fluorescent nano/micro particle-based mechanisms are accepted widely (fluorescence intensity ratio (FIR) techniques, where the ratio of populations in two consecutive energy levels is compared with Boltzmann distribution). We describe a new technique to account for the temperature rise near an illuminated upconverting particle (UCP) using wavefront imaging, which is more sensitive than the conventional thermometric techniques on the microscale. We rely on a thermo-optical phase microscopic technique by reconstructing the wavefront of emission from an upconverting particle using a Shack-Hartmann wavefront sensor. The wavefront maps the local phase distribution, which is an indicator of the surroundings' optical parameters, particularly the suspended medium's temperature-induced refractive index in the presence of convection currents. We describe how these extracted phase values can provide information about the optical heating due to the particle and hence its local environment along the direction of the emission. Our findings demonstrate the detection of a minimum temperature rise of 0.23 K, while the FIR methods indicate a minimum of 0.3 K rise. This technique is used to study the temperature increase in the backscattered direction for an upconverting particle illuminated on pump resonance. We also estimate the Soret coefficient for an upconverting particle optically trapped on pump resonance and experiencing anisotropic heating across the body.

Photophysics and its application in photon upconversion

Photoluminescence (PL) upconversion is a phenomenon involving light-matter interaction, where the energy of the emitted photons is higher than that of the incident photons. PL upconversion has promising applications in optoelectronic devices, displays, photovoltaics, imaging, diagnosis and treatment. In this review, we summarize the mechanism of PL upconversion and ultrafast PL physical processes. In particular, we highlight the advances in laser cooling, biological imaging, volumetric displays and photonics.

Near-Infrared-Responsive Rare Earth Nanoparticles for Optical Imaging and Wireless Phototherapy

Near-infrared (NIR) light is well-suited for the optical imaging and wireless phototherapy of malignant diseases because of its deep tissue penetration, low autofluorescence, weak tissue scattering, and non-invasiveness. Rare earth nanoparticles (RENPs) are promising NIR-responsive materials, owing to their excellent physical and chemical properties. The 4f electron subshell of lanthanides, the main group of rare earth elements, has rich energy-level structures. This facilitates broad-spectrum light-to-light conversion and the conversion of light to other forms of energy, such as thermal and chemical energies. In addition, the abundant loadable and modifiable sites on the surface offer favorable conditions for the functional expansion of RENPs. In this review, the authors systematically discuss the main processes and mechanisms underlying the response of RENPs to NIR light and summarize recent advances in their applications in optical imaging, photothermal therapy, photodynamic therapy, photoimmunotherapy, optogenetics, and light-responsive drug release. Finally, the challenges and opportunities for the application of RENPs in optical imaging and wireless phototherapy under NIR activation are considered.

Advanced temperature sensing with Er3+/Yb3+ co-doped Ba2GdV3O11 phosphors through upconversion luminescence

Optical thermometry is a non-contact temperature sensing technique with widespread applications. It offers precise measurements without physical contact, making it ideal for situations where contact-based methods are impractical. However, improving the accuracy of optical thermometry remains an ongoing challenge. Herein, enhancing the thermometric properties of luminescent thermometers through novel materials or strategies is crucial for developing more precise sensors. Hence, the present study focuses on the application of four-mode luminescence thermometric techniques in sol-gel synthesized Er3+/Yb3+ co-doped Ba2GdV3O11 phosphors for optical temperature sensing in the temperature range of 298-573 K. The upconversion (UC) luminescence is achieved under excitations of 980 nm or 1550 nm, resulting in bright yellow-green emission in the visible spectral range. Temperature sensing is realized by exploiting the UC emissions of 4S3/2, 2H11/2 and 4F7/2 bands, which represent intensity ratios of thermally coupled levels (TCELs) and non-thermally coupled levels (NTCELs) of Er3+/Yb3+, along with the emission lifetimes at 4S3/2. The relative sensitivity (Sr) values for TCELs exhibit a gradual decrease with rising temperature, reaching a maximum of 1.1% K-1 for 980 nm excitation and 0.86% K-1 for 1550 nm excitation at 298 K. Conversely, for NTCELs, the highest Sr value observed is 0.9% K-1 at 298 K for 1550 nm excitation. Moreover, the emission lifetimes at 4S3/2 yield notably high Sr values of up to 5.0% μs K-1 (at 425 K). Furthermore, the studied phosphors have a sub-degree thermal resolution, making them excellent materials for accurate temperature sensing. Overall, this study provides a promising new direction for the development of more precise and reliable optical thermometry techniques, which could have important implications for a range of scientific and industrial optical temperature sensing applications.

Reversible Multimode Luminescence Modulations in Photochromic-Translucent Yb3+/Eu3+ Codoped K0.5Na0.5NbO3 Ceramics

Luminescent tunable materials have promising application potential in optical switches, optical information storage, and so on. Although europium (Eu) is a good downconversion red luminescent rare earth element, there are few studies on the upconversion luminescence and photochromism of Eu-doped potassium sodium niobate (KNN) ferroelectrics. In this paper, Eu3+ and Yb3+ codoped KNN translucent ferroelectric ceramics were synthesized and the effect of Yb3+ content on the luminescence and photochromism is studied. Both the up- and downconversion luminescence intensity and decay rate before and after photochromism can be well controlled by Yb3+ content. That is, an upconversion luminescent translucent ceramic that can be completely discolored by 405 nm light illumination for 10 s was obtained. The luminescence modulations are closely related to the evolution of oxygen vacancy and crystal field around the luminescence center, which can be verified by the illumination-induced electron paramagnetic resonance (EPR) signal and local piezoresponse switching behavior variation as well as the discovery of energy level splitting and spectral line shift. We believe that this work shows a paradigm for designing high-performance reversible multimode luminescence modulation ferroelectric ceramics.

Aggregation-Induced Fluorescence Upconversion of Pyrene under Low Fluence: In Solutions and Polymeric Nanoparticles

In this study, aggregation-induced photon upconversion (iPUC) is demonstrated in the small polyaromatic molecule, pyrene. In binary-solvent mixtures, water, which induces the aggregation of polyaromatic molecules, assisted in triplet-triplet annihilation-based upconversion. No upconverted emission was observed in a dry solvent. Although upconverted emission in the absence of a triplet sensitizer was assigned to pyrene-aggregate-induced sensitization, the presence of a triplet sensitizer enhanced the upconversion efficiency. This experimental finding was further simulated to explore the possibility of iPUC in the condensed-phase polymer matrix. We studied 2-aminoethyl methacrylate hydrochloride-polystyrene copolymer nanoparticles embedded with the molecular upconversion system. The nanoparticle iPUC agreed with the proposition that water domains were present in polymer nanoparticles and helped aggregate pyrene in the host polymer. Despite the low systemic upconversion efficiency, this study provides a method for achieving fluorescence upconversion in relatively simple systems.

Achieving Orthogonal Upconversion Luminescence of a Single Lanthanide Ion in Crystals for Optical Encryption

Optical encryption shows great potential in meeting the growing demand for advanced anti-counterfeiting in the information age. The development of upconversion luminescence (UCL) materials capable of emitting different colors of light in response to different external stimuli holds great promise in this field. However, the effective realization of multicolor UCL materials usually requires complex structural designs. In this work, orthogonal UCL is achieved in crystals with a simple structure simply by introducing modulator Tm3+ ions to control the photon transition processes between different energy levels of activator Er3+ ions. The obtained crystals emit red and green UCL when excited by 980 nm and 808 nm lasers, respectively. The orthogonal excitation-emission properties of crystals are shown to be very suitable for high-level optical encryption, which is important for information security and anti-counterfeiting. This work provides an effective strategy for obtaining orthogonal UCL in simple structural materials, which will encourage researchers to further explore novel orthogonal UCL materials and their applications, and has important implications for the development of the frontier photonic upconversion fields.

Strong green upconversion emission from submicron spindle-shaped SrMoO4:Yb3+,Er3

Upconversion luminescence (UCL) is a fluorescence process where two or more lower-energy photons convert into a higher-energy photon. Lanthanide (Ln3+)-doped UCL materials often suffer from weak luminescence, especially when directly synthesized by a hydrothermal (HT) process due to the existing hydroxyl group and undesirable arrangement of dopants within host lattices which quench luminescence and limit energy transfer. Therefore, additional heat treatment processes are required to enhance their UCL emission, even though direct hydrothermal synthesis without further heat treatment has the advantages of low energy consumption, fast synthesis, and wide applicability to generate UCL materials. In this study, via a HT process without annealing, we have produced Yb3+ and Er3+ co-doped SrMoO4 submicron spindles with a strong green UCL emission which can be seen with the naked eye, which HT produced oxide-based UCL materials often fail to demonstrate. We have investigated different HT synthesis conditions, such as temperature, time, pH and dopant composition, which control the nucleation, growth, lattice structure arrangement, and ultimately their UCL properties through XRD, SEM, EDS and UCL measurements. The bright green UCL from the SrMoO4:Yb,Er submicron spindles is further enhanced by post-synthesis annealing within a molten NaNO3/KNO3 system to prevent particle size growth. The green UCL intensity from the annealed SrMoO4:Yb,Er submicron spindles surpasses samples produced by the solid-state method and is comparable to that from the commercial NaYF4:Yb,Er sample. We have further studied the temperature-dependent luminescence of both the HT-prepared and molten-salt annealed SrMoO4:Yb,Er submicron spindle samples. The strong UCL from our SrMoO4:Yb,Er submicron spindles could warrant their candidacy for bioimaging and anticounterfeiting applications.

Tandem Photon Avalanches for Various Nanoscale Emitters with Optical Nonlinearity up to 41st-Order through Interfacial Energy Transfer

Photon avalanche has received continuous attention owing to its superior nonlinear dynamics and promising advanced applications. However, its impact is limited due to the intrinsic energy levels as well as the harsh requirements for the composites and sizes of doped materials. Here, with a universal mechanism named tandem photon avalanche (TPA), giant optical nonlinear response up to 41st-order in erbium ions, one of the most important lanthanide emitters, has been achieved on the nanoscale through interfacial energy transfer process. After capturing energy directly from the avalanched energy state 3 H4 of Tm3+ (800-nm emission), erbium ions also exhibit bright green and red PA emissions with intensities comparable to that of Tm3+ at a low excitation threshold (7.1 kWcm-2 ). Using the same strategy, effective PA looping cycles are successfully activated in Ce3+ and Ho3+ . Additionally, Yb3+ -mediated networks are constructed to further propagate PA effects to lowly-doped Tm3+ , enabling 475-nm PA emission. The newly proposed TPA strategy provides a facile route for generating photon avalanche not only from erbium ions but also from various emitters in multilayered core-shell nanoparticles.

Temperature Sensing Properties of Biocompatible Yb/Er-Doped GdF3 and YF3 Mesocrystals

Y0.8-xGdxF3:Yb/Er mesocrystals with a biocompatible surface and diverse morphological characteristics were successfully synthesized using chitosan-assisted solvothermal processing. Their structural properties, studied using X-ray powder diffraction, Fourier transform infrared spectroscopy, scanning and transmission electron microscopy and energy dispersive X-ray analysis, were further correlated with the up-conversion emission (λexc = 976 nm) recorded in function of temperature. Based on the change in the visible green emissions originating from the thermally coupled 2H11/2 and 4S3/2 levels of Er3+, the corresponding LIR was acquired in the physiologically relevant range of temperatures (25-50 °C). The detected absolute sensitivity of about 0.0042 °C-1, along with the low cytotoxicity toward both normal human lung fibroblasts (MRC-5) and cancerous lung epithelial (A549) cells, indicate a potential for use in temperature sensing in biomedicine. Additionally, their enhanced internalization in cells, without suppression of cell viability, enabled in vitro labeling of cancer and healthy cells upon 976 nm laser irradiation.

Designing photon upconversion nanoparticles capable of intense emission in whole human blood

The properties of upconverting nanoparticles (UCNPs) are crucial for their applications in biomedicine. For studies of organisms and biological materials, the penetration depth of excitation light is also essential as the depth from which the luminescence can be detected. Currently, many researchers are trying to obtain UCNPs with intense emission under excitation wavelengths from the biological transparency windows to increase the penetration depth. However, studies comparing the properties of various types of UCNPs in real conditions are rare. This article shows how deep the 808, 975, 1208, and 1532 nm laser radiation penetrates human blood. Moreover, we determined how thick a layer of blood still permits for observation of the luminescence signal. The measured luminescence properties indicated that the near-infrared light could pass through the blood even to a depth of 7.5 mm. The determined properties of core/shell NaErF4/NaYF4 materials are the most advantageous, and their emission is detectable through 3.0 mm of blood layer using a 1532 nm laser. We prove that the NaErF4/NaYF4 UCNPs can be perfect alternatives for the most studied NaYF4:Yb3+,Er3+/NaYF4. Additionally, the setup proposed in this article can potentially decrease reliance on animal testing in initial biomedicine research.

LaVO4: Eu3+ nano-islands onto silica for achieving fluorescence enhancement and their detection of Fe3+ ions and anti-counterfeiting applications

Rare earth (RE) composite fluorescent materials are favored by researchers in the field of anti-counterfeiting and ion sensing due to their fascinating optical properties. Ultra-small RE fluorescent nanoparticles are anchored on inorganic carriers by a simple preparation method to improve luminous intensity and hydrophilicity, which has not been explored yet. Herein, LaVO4: Eu3+ nano-islands anchored on silica with high fluorescence intensity and easy formation of stable colloidal solution is designed. Through a simple and mild hydrothermal approach, ultra-small LaVO4: Eu3+ nano-islands are highly dispersed on the surface of hierarchical hollow silica sphere (HHSS) to expose more luminescent centers. Remarkably, the stable HHSS@LaVO4: Eu3+ colloidal solution displayed highly sensitive and selective sensor for Fe3+ ions. The "island-sea synergy" structure formed by the LaVO4: Eu3+ nano-islands and the surrounding silica surface makes HHSS@LaVO4: Eu3+ to be an outstanding sensor for the effective detection of iron ions in water. In addition, HHSS@LaVO4: Eu3+ phosphor exhibit unique properties for anti-counterfeiting and encryption applications. These findings provide a promising strategy for the carrierisation of RE luminescent materials to improve optical properties and enable broader applications.

Symmetry and Rigidity for Boosting Erbium-Based Molecular Light-Upconversion in Solution

Previously limited to highly symmetrical homoleptic triple-helical complexes [Er(Lk)3 ]3+ , where Lk are polyaromatic tridentate ligands, single-center molecular-based upconversion using linear optics and exploiting the excited-state absorption mechanism (ESA) greatly benefits from the design of stable and low-symmetrical [LkEr(hfa)3 ] heteroleptic adducts (hfa- =hexafluoroacetylacetonate anion). Depending on (i) the extended π-electron delocalization, (ii) the flexibility and (iii) the heavy atom effect brought by the bound ligand Lk, the near-infrared (801 nm) to visible green (542 nm) upconversion quantum yield measured for [LkEr(hfa)3 ] in solution at room temperature can be boosted by up to three orders of magnitude.

A supramolecular assembly-based strategy towards the generation and amplification of photon up-conversion and circularly polarized luminescence

For the molecular properties in which energy transfer/migration is determinantal, such as triplet-triplet annihilation-based photon up-conversion (TTAUC), the overall performance is largely affected by the intermolecular distance and relative molecular orientations. In such scenarios, tools that may steer the intermolecular interactions and provide control over molecular organisation in the bulk, become most valuable. Often these non-covalent interactions, found predominantly in supramolecular assemblies, enable pre-programming of the molecular network in the assembled structures. In other words, by employing supramolecular chemistry principles, an arrangement where molecular units are arranged in a desired fashion, very much like a Lego toy, could be achieved. This leads to enhanced energy transfer from one molecule to other. In recent past, chiral luminescent systems have attracted huge attention for producing circularly polarized luminescence (CPL). In such systems, chirality is a necessary requirement. Chirality induction/transfer through supramolecular interactions has been known for a long time. It was realized recently that it may help in the generation and amplification of CPL signals as well. In this review article we have discussed the applicability of self-/co-assembly processes for achieving maximum TTA-UC and CPL in various molecular systems.

Synergistic or antagonistic effect of lanthanides on Rose Bengal photophysics in upconversion nanohybrids?

A nanohybrid made of a xanthenic dye, rose bengal, grafted to an ytterbium and erbium codoped upconversion nanoparticle (UCNP) served as a proof-of-concept to evaluate the fundamental mechanisms which govern the dye photophysics upon interaction with the UCNP. Both photoactive lanthanides strongly influence the singlet and triplet excited states of rose bengal.

Thermal Effects in Up-Conversion Luminescence NaYF4: Tm3+, Yb3+ Core-Shell Nanoparticles in the Temperature Range of 18-312 K

This work demonstrates the temperature (18-312 K) impact on Tm3+ up-conversion luminescence in core-shell structured NaYF4:Tm3+, Yb3+ nanoparticles excited at 976 nm. As the temperature decreases from room temperature to 18 K, Tm3+ up-conversion luminescence bands intensities greatly increase, an average of 60-fold, emitting intense blue and ultraviolet radiation. Tm3+ up-conversion luminescence spectra measurements at different temperatures reveal that three thermal quenching mechanisms are responsible for observed variations in Tm3+ up-conversion luminescence spectra. These three quenching mechanisms are related to the excitation radiation absorption, Stark sublevel population, and energy transfer from Yb3+ to Tm3+.

Editor's Choice collection: photon upconversion

Associate Editor, Professor Xiaogang Liu (National University of Singapore), introduces this Editor's Choice collection in Nanoscale on photon upconversion.

Pure red upconverted and near-infrared luminescence properties of Er3+ -doped SnO2 nanocrystals for lighting applications

Tin oxide (SnO2 ) nanocrystalline powders doped with erbium ion (Er3+ ) in different molar ratios (0, 3, 5, and 7 mol%) were prepared using a solid-state reaction technique. These samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet-visible absorption, visible upconversion, and near-infrared luminescence techniques. XRD analysis revealed the tetragonal rutile structure of SnO2 and the average crystallite size was about 32 nm. From Tauc's plots, it was confirmed that the substitution of Er3+ ions into the SnO2 host lattice resulted in the narrowing its band gap. Optical absorption bands at 520 and 654 nm correspond to the 4f electron transitions of Er3+ further confirming visible light absorption. Infrared luminescence spectra showed a broad band centred at 1536 nm which is assigned to the 4 I13/2  → 4 I15/2 transition of Er3+ . Visible upconverted emission spectra under 980 nm excitation exhibit a strong red luminescence with a main peak at 672 nm which is attributed to the 4 F9/2  → 4 I15/2 transition of Er3+ . Power-dependent upconversion spectra confirmed that two photons participated in the upconversion mechanism. Enhancement in the intensities of both visible and infrared luminescence was observed when raising the concentration. The results pave the way for the potential applications of these nanocrystalline powders in energy harvesting applications such as infrared light upconverting layer in solar cells, light emitting diodes, infrared broadband sources and amplifiers, and biological labelling.

Multifunctional mesoporous silica nanoparticles for biomedical applications

Mesoporous silica nanoparticles (MSNs) are recognized as a prime example of nanotechnology applied in the biomedical field, due to their easily tunable structure and composition, diverse surface functionalization properties, and excellent biocompatibility. Over the past two decades, researchers have developed a wide variety of MSNs-based nanoplatforms through careful design and controlled preparation techniques, demonstrating their adaptability to various biomedical application scenarios. With the continuous breakthroughs of MSNs in the fields of biosensing, disease diagnosis and treatment, tissue engineering, etc., MSNs are gradually moving from basic research to clinical trials. In this review, we provide a detailed summary of MSNs in the biomedical field, beginning with a comprehensive overview of their development history. We then discuss the types of MSNs-based nanostructured architectures, as well as the classification of MSNs-based nanocomposites according to the elements existed in various inorganic functional components. Subsequently, we summarize the primary purposes of surface-functionalized modifications of MSNs. In the following, we discuss the biomedical applications of MSNs, and highlight the MSNs-based targeted therapeutic modalities currently developed. Given the importance of clinical translation, we also summarize the progress of MSNs in clinical trials. Finally, we take a perspective on the future direction and remaining challenges of MSNs in the biomedical field.