Synthesis and Optical Properties of Hybrid and Alloy Plasmonic Nanoparticles

Morphology Control of Au-Ni Hybrid Nanoparticles: Exploring Heterostructures and Optical Tuning

Hybrid nanoparticles (NPs) have attracted considerable attention because of their ability to provide diverse properties by integrating the inherent properties of multiple components; however, synthetic strategies to control their morphology remain unexplored. In this study, a new method was used to control the morphology and optical properties of Au-Ni heterostructure (ANH) NPs. Unique morphological changes were observed by varying the Au/Ni precursor ratio from 2:1 to 1:4, exhibiting a shape transformation from dumbbell-like to quasi-spherical owing to the Ni NP size expansion, whereas the Au NP maintained their size. Moreover, increasing the Ni ratio induced plasmonic band broadening and wavelength redshift, resulting in color changes from red to navy and black. In terms of the structure, the atomic orientation of the crystallite showed that even a large lattice mismatch can result in heterojunctions at the NPs. In addition, the reaction aliquots uncovered heterogeneous nucleation and growth of ANH NPs in the colloidal system, demonstrating Ni reduction on the preformed Au NP owing to the reduction in potential gap. This study provides new insights into controlling the morphology of hybrid NPs using colloidal synthesis and the design of optimized materials for various applications.

Nano-optogenetics for Disease Therapies

Optogenetic, known as the method of 21 centuries, combines optic and genetic engineering to precisely control photosensitive proteins for manipulation of a broad range of cellular functions, such as flux of ions, protein oligomerization and dissociation, cellular intercommunication, and so on. In this technique, light is conventionally delivered to targeted cells through optical fibers or micro light-emitting diodes, always suffering from high invasiveness, wide-field illumination facula, strong absorption, and scattering by nontargeted endogenous substance. Light-transducing nanomaterials with advantages of high spatiotemporal resolution, abundant wireless-excitation manners, and easy functionalization for recognition of specific cells, recently have been widely explored in the field of optogenetics; however, there remain a few challenges to restrain its clinical applications. This review summarized recent progress on light-responsive genetically encoded proteins and the myriad of activation strategies by use of light-transducing nanomaterials and their disease-treatment applications, which is expected for sparking helpful thought to push forward its preclinical and translational uses.

Element specific atom counting for heterogeneous nanostructures: Combining multiple ADF STEM images for simultaneous thickness and composition determination

In this paper, a methodology is presented to count the number of atoms in heterogeneous nanoparticles based on the combination of multiple annular dark field scanning transmission electron microscopy (ADF STEM) images. The different non-overlapping annular detector collection regions are selected based on the principles of optimal statistical experiment design for the atom-counting problem. To count the number of atoms, the total intensities of scattered electrons for each atomic column, the so-called scattering cross-sections, are simultaneously compared with simulated library values for the different detector regions by minimising the squared differences. The performance of the method is evaluated for simulated Ni@Pt and Au@Ag core-shell nanoparticles. Our approach turns out to be a dose efficient alternative for the investigation of beam-sensitive heterogeneous materials as compared to the combination of ADF STEM and energy dispersive X-ray spectroscopy.

Gallium-based liquid metals as reaction media for nanomaterials synthesis

Gallium-based liquid metals (LMs) and their alloys have gained prominence in the realm of flexible and stretchable electronics. Recent advances have expanded the interest to explore the electron-rich core and interface of LMs to synthesize various nanomaterials, where Ga-based LMs serve as versatile reaction media. In this paper, we delve into the latest developments within this burgeoning field. Our discussion begins by elucidating the unique attributes of LMs that render them suitable as reaction media, including their high metal solubility, low standard reduction potential, self-limiting oxidation and ultra-smooth and "layer" surface. We then provide a comprehensive categorized summary of utilizing these features to fabricate a variety of nanomaterials, including pure metallic materials (metal alloys, metal crystals, porous metals, high-entropy alloys and metallic single atoms), metal-inorganic compounds (2D metal oxides, 2D metallic inorganic compounds and 2D graphitic materials), as well as metal-organic composites (metal-organic frameworks). This paper concludes by discussing the current challenges in this field and exploring potential future directions. The versatility and unique properties of Ga-based LMs are poised to play a pivotal role in the future of nanomaterial science, paving the way for more efficient, sustainable, and innovative technological solutions.

Complementary imaging of nanoclusters interacting with mitochondria via stimulated emission depletion and scanning transmission electron microscopy

The emerging stress caused by nanomaterials in the environment is of great concern because they can have toxic effects on organisms. However, thorough study of the interactions between cells and diverse nanoparticles (NPs) using a unified approach is challenging. Here, we present a novel approach combining stimulated emission depletion (STED) microscopy and scanning transmission electron microscopy (STEM) for quantitative assessment, real-time tracking, and in situ imaging of the intracellular behavior of gold-silver nanoclusters (AuAgNCs), based on their fluorescence and electron properties. The results revealed an aggregated state of AuAgNCs within the mitochondria and an increase in sulfur content in AuAgNCs, presumably owing to their reaction with thiol-containing molecules inside the mitochondria. Moreover, AuAgNCs (100 μg/mL) induced a 75% decline in mitochondrial membrane potential and a 12-fold increase of mitochondrial reactive oxygen species in comparison to control. This mitochondrial damage may be triggered by the reaction of AuAgNCs with thiol, which provides direct imaging evidence for uncovering the action mechanism of AuAgNCs on the mitochondria. The proposed dual-imaging strategy using STED and STEM is a potential tool to offer valuable insights into cytotoxicity between subcellular structures and diverse NPs, and can serve as a key strategy for nanomaterial biosafety assessment.

Light-induced MOF synthesis enabling composite photothermal materials

Metal-organic frameworks (MOFs) are a class of porous materials known for their large surface areas. Thus, over the past few decades the development of MOFs and their applications has been a major topic of interest throughout the scientific community. However, many current conventional syntheses of MOFs are lengthy solvothermal processes carried out at elevated temperatures. Herein, we developed a rapid light-induced synthesis of MOFs by harnessing the plasmonic photothermal abilities of bipyramidal gold nanoparticles (AuBPs). The generality of the photo-induced method was demonstrated by synthesizing four different MOFs utilizing three different wavelengths (520 nm, 660 nm and 850 nm). Furthermore, by regulating light exposure, AuBPs could be embedded in the MOF or maintained in the supernatant. Notably, the AuBPs-embedded MOF (AuBP@UIO-66) retained its plasmonic properties along with the extraordinary surface area typical to MOFs. The photothermal AuBP@UIO-66 demonstrated a significant light-induced heating response that was utilized for ultrafast desorption and MOF activation.

Ag3PO4 enables the generation of long-lived radical cations for visible light-driven [2 + 2] and [4 + 2] pericyclic reactions

Photocatalytic redox reactions are important for synthesizing fine chemicals from olefins, but the limited lifetime of radical cation intermediates severely restricts semiconductor photocatalysis efficiency. Here, we report that Ag3PO4 can efficiently catalyze intramolecular and intermolecular [2 + 2] and Diels-Alder cycloadditions under visible-light irradiation. The approach is additive-free, catalyst-recyclable. Mechanistic studies indicate that visible-light irradiation on Ag3PO4 generates holes with high oxidation power, which oxidize aromatic alkene adsorbates into radical cations. In photoreduced Ag3PO4, the conduction band electron (eCB-) has low reduction power due to the delocalization among the Ag+-lattices, while the particle surfaces have a strong electrostatic interaction with the radical cations, which considerably stabilize the radical cations against recombination with eCB-. The radical cation on the particle's surfaces has a lifetime of more than 2 ms, 75 times longer than homogeneous systems. Our findings highlight the effectiveness of inorganic semiconductors for challenging radical cation-mediated synthesis driven by sunlight.

Accurate prediction of the optical properties of nanoalloys with both plasmonic and magnetic elements

The alloying process plays a pivotal role in the development of advanced multifunctional plasmonic materials within the realm of modern nanotechnology. However, accurate in silico predictions are only available for metal clusters of just a few nanometers, while the support of modelling is required to navigate the broad landscape of components, structures and stoichiometry of plasmonic nanoalloys regardless of their size. Here we report on the accurate calculation and conceptual understanding of the optical properties of metastable alloys of both plasmonic (Au) and magnetic (Co) elements obtained through a tailored laser synthesis procedure. The model is based on the density functional theory calculation of the dielectric function with the Hubbard-corrected local density approximation, the correction for intrinsic size effects and use of classical electrodynamics. This approach is built to manage critical aspects in modelling of real samples, as spin polarization effects due to magnetic elements, short-range order variability, and size heterogeneity. The method provides accurate results also for other magnetic-plasmonic (Au-Fe) and typical plasmonic (Au-Ag) nanoalloys, thus being available for the investigation of several other nanomaterials waiting for assessment and exploitation in fundamental sectors such as quantum optics, magneto-optics, magneto-plasmonics, metamaterials, chiral catalysis and plasmon-enhanced catalysis.

Tuneable Plasmonic Resonances Of A Dynamic Thin Film Of Ultrasmall Nanocrystals Modified In the Anti-Galvanic Reduction Process

Ultrasmall gold nanoparticles (NPs) have revolutionized nanotechnology as they are an excellent starting substrate for the synthesis of organic-inorganic hybrid materials with photonic or energy conversion applications, often with a responsive nature. However, ultrasmall NPs do not sustain plasmonic resonances, preventing their use in plasmon-related applications. In the presented work, we show a method of chemical modification of ultrasmall gold nanoparticles in order to fabricate dynamically controlled plasmonic thin films. For this purpose, we used the Anti-Galvanic Reduction process (AGR) to modify the surface of small gold nanoparticles, inducing plasmonic properties without notable size increases. Au@Ag NPs are then modified with liquid crystal-like organic ligands. The obtained NPs can assemble into densely packed films with long-range order and temperature-dependent structural properties. Namely, we detect two, fully reversible phase transitions between the hexagonal and cubic symmetries. The combination of AGR and organic surface modifications enabled us to demonstrate the possibility of managing plasmonic properties in the thin film of ~2 nm diameter metallic NPs.

A Calibration-Free Optical Emission Spectroscopic Method to Determine the Composition of a Spark Discharge Plasma Used for AuAg Binary Nanoparticle Synthesis

Spark discharge generators (SDGs) employ controlled gaseous environments to induce spark ablation of non-insulating electrodes, resulting in the formation of various nanostructures in the gas phase. The method offers technological advantages such as continuous particle production, scalable yield, and minimal waste. Additionally, the versatility of the process enables the generation of alloy nanoparticles from various material combinations, including immiscible ones. In order to fully exploit its potential, understanding the atomic mixing process during electrode ablation, particularly in the case of dissimilar electrodes, is crucial. Temporally and spatially resolved optical emission spectroscopy (OES) has been previously demonstrated as an effective characterization tool for spark plasmas in SDGs. However, to gain a deeper insight into the vapor mixing process, it is essential to quantitatively determine the plasma composition in both space and time. This paper introduces a calibration-free OES-based method tailored for spark plasmas utilized in binary nanoparticle generation. The method introduces the so-called multi-element combinatory Boltzmann plots, which use intensity ratios of emission atomic lines from different materials, allowing for the direct estimation of total number concentration ratios. The approach is tested using synthetic spectra and validated with experimental spark spectra obtained near an alloyed gold-silver (AuAg) electrode with a known composition. The study demonstrates the capabilities and robustness of the proposed method, with a focus on the AuAg system due to its significance in plasmonic research and frequent synthesis using spark ablation.

The Origin of the Intracellular Silver in Bacteria: A Comprehensive Study using Targeting Gold-Silver Alloy Nanoparticles

The bactericidal effects of silver nanoparticles (Ag NPs) against infectious strains of multiresistant bacteria is a well-studied phenomenon, highly relevant for many researchers and clinicians battling bacterial infections. However, little is known about the uptake of the Ag NPs into the bacteria, the related uptake mechanisms, and how they are connected to antimicrobial activity. Even less information is available on AgAu alloy NPs uptake. In this work, the interactions between colloidal silver-gold alloy nanoparticles (AgAu NPs) and Staphylococcus aureus (S. aureus) using advanced electron microscopy methods are studied. The localization of the nanoparticles is monitored on the membrane and inside the bacterial cells and the elemental compositions of intra- and extracellular nanoparticle species. The findings reveal the formation of pure silver nanoparticles with diameters smaller than 10 nm inside the bacteria, even though those particles are not present in the original colloid. This finding is explained by a local RElease PEnetration Reduction (REPER) mechanism of silver cations emitted from the AgAu nanoparticles, emphasized by the localization of the AgAu nanoparticles on the bacterial membrane by aptamer targeting ligands. These findings can deepen the understanding of the antimicrobial effect of nanosilver, where the microbes are defusing the attacking silver ions via their reduction, and aid in the development of suitable therapeutic approaches.

Element-ratio dependence of the 5d-states of Au and Pt in solid-solution-type Au-Pt alloy nanoparticles studied by X-ray absorption spectroscopy and density functional theory

Solid-solution-type Au-Pt alloy nanoparticles (NPs) were prepared from the nanoclusters of each metal using the polymer-conjugated fusion growth method. The elemental mapping analysis showed that the mixing state of the elements in the NPs drastically changed in the narrow reaction-temperature range from 100 °C to 180 °C. For their various mixing states, the 5d-states of Au and Pt atoms in the alloy NPs were investigated on the basis of the white line intensities of X-ray absorption near edge structure (XANES). Then, the 5d-states of Au and Pt atoms in a model crystalline ordered alloy structures were investigated on the basis of the theoretically calculated XANES spectra using density functional theory (DFT) in the whole composition range. The DFT calculation showed that the changes in the absorption spectra near the Pt and Au edges are caused by the change in the occupation of the Pt 5d-states and the orbital hybridisation of the Au 5d-states with the 5d-states of neighbouring Pt atoms around an Au atom, respectively.

Rugged Forest Morphology of Magnetoplasmonic Nanorods that Collect Maximum Light for Photoelectrochemical Water Splitting

A feasible nanoscale framework of heterogeneous plasmonic materials and proper surface engineering can enhance photoelectrochemical (PEC) water-splitting performance owing to increased light absorbance, efficient bulk carrier transport, and interfacial charge transfer. This article introduces a new magnetoplasmonic (MagPlas) Ni-doped Au@Fex Oy nanorods (NRs) based material as a novel photoanode for PEC water-splitting. A two stage procedure produces core-shell Ni/Au@Fex Oy MagPlas NRs. The first-step is a one-pot solvothermal synthesis of Au@Fex Oy . The hollow Fex Oy nanotubes (NTs) are a hybrid of Fe2 O3 and Fe3 O4 , and the second-step is a sequential hydrothermal treatment for Ni doping. Then, a transverse magnetic field-induced assembly is adopted to decorate Ni/Au@Fex Oy on FTO glass to be an artificially roughened morphologic surface called a rugged forest, allowing more light absorption and active electrochemical sites. Then, to characterize its optical and surface properties, COMSOL Multiphysics simulations are carried out. The core-shell Ni/Au@Fex Oy MagPlas NRs increase photoanode interface charge transfer to 2.73 mAcm-2 at 1.23 V RHE. This improvement is made possible by the rugged morphology of the NRs, which provide more active sites and oxygen vacancies as the hole transfer medium. The recent finding may provide light on plasmonic photocatalytic hybrids and surface morphology for effective PEC photoanodes.

Silver-Gold Alloy Nanoparticles (AgAu NPs): Photochemical Synthesis of Novel Biocompatible, Bimetallic Alloy Nanoparticles and Study of Their In Vitro Peroxidase Nanozyme Activity

Facile synthesis of metal nanoparticles with controlled physicochemical properties using environment-friendly reagents can open new avenues in biomedical applications. Nanomaterials with controlled physicochemical properties have opened new prospects for a variety of applications. In the present study, we report a single-step photochemical synthesis of ~5 nm-sized silver (Ag) and gold (Au) nanoparticles (NPs), and Ag-Au alloy nanoparticles using L-tyrosine. The physicochemical and surface properties of both monometallic and bimetallic NPs were investigated by analytical, spectroscopic, and microscopic techniques. Our results also displayed an interaction between L-tyrosine and surface atoms that leads to the formation of AgAu NPs by preventing the growth and aggregation of the NPs. This method efficiently produced monodispersed NPs, with a narrow-sized distribution and good stability in an aqueous solution. The cytotoxicity assessment performed on breast cancer cell lines (MCF-7) revealed that the biofriendly L-tyrosine-capped AgNPs, AuNPs, and bimetallic AgAu NPs were biocompatible. Interestingly, AgAu NPs have also unveiled controlled cytotoxicity, cell viability, and in vitro peroxidase nanozyme activity reliant on metal composition and surface coating.

Morphology-Controlled Growth of Crystalline Ag-Pt-Alloyed Shells onto Au Nanotriangles and Their Plasmonic Properties

The surface plasmon resonance of noble-metal nanoparticles depends on nanoscale size, morphology, and composition, and provides great opportunities for applications in biomedicine, optoelectronics, (photo)catalysis, photovoltaics, and sensing. Here, we present the results of synthesizing ternary metallic or trimetallic nanoparticles, Au nanotriangles (Au NTs) with crystalline Ag-Pt alloyed shells, the morphology of which can be adjusted from a yolk-shell to a core-shell structure by changing the concentration of AgNO3 or the concentration of Au NT seeds, while the shell thickness can be precisely controlled by adjusting the concentration of K2PtCl4. By monitoring the growth process with UV-vis spectra and scanning transmission electron microscopy (STEM), the shells on the Au NT-Ag-Pt yolk-shell nanoparticles were found to grow via a galvanic replacement synergistic route. The plasmonic properties of the as-synthesized nanoparticles were investigated by optical absorbance measurements.

Plasmonic Nanostructure Engineering with Shadow Growth

Physical shadow growth is a vacuum deposition technique that permits a wide variety of 3D-shaped nanoparticles and structures to be fabricated from a large library of materials. Recent advances in the control of the shadow effect at the nanoscale expand the scope of nanomaterials from spherical nanoparticles to complex 3D shaped hybrid nanoparticles and structures. In particular, plasmonically active nanomaterials can be engineered in their shape and material composition so that they exhibit unique physical and chemical properties. Here, the recent progress in the development of shadow growth techniques to realize hybrid plasmonic nanomaterials is discussed. The review describes how fabrication permits the material response to be engineered and highlights novel functions. Potential fields of application with a focus on photonic devices, biomedical, and chiral spectroscopic applications are discussed.

Ultra-clean ternary Au/Ag/AgCl nanoclusters favoring cryogenic temperature-boosted broadband SERS ultrasensitive detection

Exploring multifunctional surface-enhanced Raman scattering (SERS) substrates with high sensitivity, broadband response property and reliable practicability should be required for ultrasensitive molecular detection in complex environments, which is heavily dependent on the photo-induced charge transfer (PICT) efficiency realized on the desirable nano-architectures. Herein, we introduce ultra-clean ternary Au/Ag/AgCl nanoclusters (NCs) with broadband resonance crossing the visible light to near-infrared region created by one step laser irradiation of mixed metal ion solution. Interestingly, the surface defects and interaction among these unique cluster-like ternary nanostructures would be further enhanced by thermal annealing treatment at 300°C, providing higher broadband SERS activities than the reference ternary nanoparticles under 457, 532, 633, 785, and 1064 nm wavelengths excitation. More importantly, the further promoted SERS activities of the resultant Au/Ag/AgCl NCs with achievable ∼5-fold enhancement than the initial one can be conventionally realized by simplistically declining the temperature from normal 20°C to cryogenic condition at about -196°C, due to the lower temperature-suppressed non-radiative recombination of lattice thermal phonons and photogenerated electrons. The cryogenic temperature-boosted SERS of the resultant Au/Ag/AgCl NCs enables the limit of detection (LOD) of folic acid (FA) biomolecules to be achieved as low as 10-12 M, which is obviously better than that of 10-9 M at room temperature condition. Overall, the smart Au/Ag/AgCl NCs-based broadband SERS sensor provides a new avenue for ultrasensitive biomolecular monitoring at cryogenic condition.

Metallic and Non-Metallic Plasmonic Nanostructures for LSPR Sensors

Localized surface plasmonic resonance (LSPR) provides a unique scheme for light management and has been demonstrated across a large variety of metallic nanostructures. More recently, non-metallic nanostructures of two-dimensional atomic materials and heterostructures have emerged as a promising, low-cost alternative in order to generate strong LSPR. In this paper, a review of the recent progress made on non-metallic LSPR nanostructures will be provided in comparison with their metallic counterparts. A few applications in optoelectronics and sensors will be highlighted. In addition, the remaining challenges and future perspectives will be discussed.

Silver and Gold Containing Compounds of p-Block Elements As Perspective Materials for UV Plasmonics

We present a review of phase formation tendencies, methods for preparation and optical properties of alloys and compounds from the binary systems of silver or gold with metals and metalloids from the p-block of the Periodic system of elements. Reference data about the homogeneity regions in the systems of interest, together with information about the crystalline structure of existing indexed compounds in them, is proposed and statistically analyzed. General background for the synthesis of intermetallic alloys and compounds, and the tendencies for their preparation for plasmonic purposes are presented. The high plasma frequency, ω_p of p-block metals makes their alloys with silver and gold an interesting object of study, due to the possibility of ω_p variation over a wide interval in the ultraviolet (UV) spectral region with a view to finding more efficient materials for excitation of a localized surface plasmon resonance (LSPR) necessary for various applications and techniques operating in this part of the electromagnetic spectrum. Unlike the alloys between the noble metals Cu, Ag, and Au, which form continuous series of solid solutions, different areas can be observed in the phase diagrams of the Ag(Au)-p-block systems, containing solid solutions, intermetallic compounds, and heterogeneous mixtures. The ability to vary the plasma frequency of solid solutions, like the alloys between the noble metals Cu, Ag, and Au, is the reason to pay attention to the compositions of the Ag(Au-p-block systems that fall in these regions of their phase diagrams. The analysis of the published results for complex permittivity shows that the addition of small amounts of conductive p-block elements to noble metals reduces the energy gap for interband transitions and increases their plasmonic activity in the UV spectral range. The article analyzes the relationship between electrical resistivity and LSPR excitation efficiency, which shows that the intermetallic compounds from Ag(Au)-p-block systems with a well-ordered crystalline structure and good conductivity level can be more effective materials for UV plasmonics than the boundary solid solutions. Intermetallic compounds can be easily obtained in the form of bulk samples, thin films, and nanoparticles with controlled size and geometric shape. The spectral dependences of the plasmon efficiency of the intermetallic compounds, determined from their complex permittivity functions, show that they are promising materials for excitation of LSPR in the UV spectral region.

Synthesis of Controllable Cu Shells on Au Nanoparticles with Electrodeposition: A Systematic in Situ Single Particle Study

Bimetallic Cu on Au nanoparticles with controllable morphology and optical properties were obtained via electrochemical synthesis. In particular, multilobed structures with good homogeneity were achieved through the optimization of experimental parameters such as deposition current, charge transfer, and metal ion concentration. A hyperspectral dark field scattering setup was used to characterize the electrodeposition on a single particle level, with changes in localized surface plasmon resonance frequency correlated with deposition charge transfer and amount of Cu deposited as determined by electron microscopy. This demonstrated the ability to tune morphology and spectra through electrochemical parameters alone. Time-resolved in situ measurements of single particle spectra were obtained, giving an insight into the kinetics of the deposition process. Nucleation of multiple cubes of Cu initially occurs preferentially on the tips of Au nanoparticles, before growing and coalescing to form a multilobed, lumpy shell. Modifying the surface of Au nanoparticles by plasma treatment resulted in thicker and more uniform Cu shells.

Disproportional surface segregation in ligand-free gold-silver alloy solid solution nanoparticles, and its implication for catalysis and biomedicine

Catalytic activity and toxicity of mixed-metal nanoparticles have been shown to correlate and are known to be dependent on surface composition. The surface chemistry of the fully inorganic, ligand-free silver-gold alloy nanoparticle molar fraction series, is highly interesting for applications in heterogeneous catalysis, which is determined by active surface sites which are also relevant for understanding their dissolution behavior in biomedically-relevant ion-release scenarios. However, such information has never been systematically obtained for colloidal nanoparticles without organic surface ligands and has to date, not been analyzed in a surface-normalized manner to exclude density effects. For this, we used detailed electrochemical measurements based on cyclic voltammetry to systematically analyze the redox chemistry of particle-surface-normalized gold-silver alloy nanoparticles with varying gold molar fractions. The study addressed a broad range of gold molar fractions (Ag₉₀Au₁₀, Ag₈₀Au₂₀, Ag₇₀Au₃₀, Ag₅₀Au₅₀, Ag₄₀Au₆₀, and Ag₂₀Au₈₀) as well as monometallic Ag and Au nanoparticle controls. Oxygen reduction reaction (ORR) measurements in O₂ saturated 0.1 M KOH revealed a linear reduction of the overpotential with increasing gold content on the surface, probably attributed to the higher ORR activity of gold over silver, verified by monometallic Ag and Au controls. These findings were complemented by detailed XPS studies revealing an accumulation of the minor constituent of the alloy on the surface, e.g., silver surface enrichment in gold-rich particles. Furthermore, highly oxidized Ag surface site enrichment was detected after the ORR reaction, most pronounced in gold-rich alloys. Further, detailed CV studies at acidic pH, analyzing the position, onset potential, and peak integrals of silver oxidation and silver reduction peaks revealed particularly low reactivity and high chemical stability of the equimolar Au₅₀Ag₅₀ composition, a phenomenon attributed to the outstanding thermodynamic, entropically driven, stabilization arising at this composition.

Near-infrared-featured broadband CO2 reduction with water to hydrocarbons by surface plasmon

Imitating the natural photosynthesis to synthesize hydrocarbon fuels represents a viable strategy for solar-to-chemical energy conversion, where utilizing low-energy photons, especially near-infrared photons, has been the ultimate yet challenging aim to further improving conversion efficiency. Plasmonic metals have proven their ability in absorbing low-energy photons, however, it remains an obstacle in effectively coupling this energy into reactant molecules. Here we report the broadband plasmon-induced CO₂ reduction reaction with water, which achieves a CH₄ production rate of 0.55 mmol g^-1 h^-1 with 100% selectivity to hydrocarbon products under 400 mW cm^-2 full-spectrum light illumination and an apparent quantum efficiency of 0.38% at 800 nm illumination. We find that the enhanced local electric field plays an irreplaceable role in efficient multiphoton absorption and selective energy transfer for such an excellent light-driven catalytic performance. This work paves the way to the technique for low-energy photon utilization.

Spontaneous Hetero-attachment of Single-Component Colloidal Precursors for the Synthesis of Asymmetric Au-Ag2X (X = S, Se) Heterodimers

Finding simple, easily controlled, and flexible synthetic routes for the preparation of ternary and hybrid nanostructured semiconductors is always highly desirable, especially to fulfill the requirements for mass production to enable application to many fields such as optoelectronics, thermoelectricity, and catalysis. Moreover, understanding the underlying reaction mechanisms is equally important, offering a starting point for its extrapolation from one system to another. In this work, we developed a new and more straightforward colloidal synthetic way to form hybrid Au-Ag₂X (X = S, Se) nanoparticles under mild conditions through the reaction of Au and Ag₂X nanostructured precursors in solution. At the solid-solid interface between metallic domains and the binary chalcogenide domains, a small fraction of a ternary AuAg₃X₂ phase was observed to have grown as a consequence of a solid-state electrochemical reaction, as confirmed by computational studies. Thus, the formation of stable ternary phases drives the selective hetero-attachment of Au and Ag₂X nanoparticles in solution, consolidates the interface between their domains, and stabilizes the whole hybrid Au-Ag₂X systems.

Effect of light at different wavelengths on polyol synthesis of silver nanocubes

Despite the presence of light-sensitive species in the polyol synthesis of silver nanocubes, the influence of light on it has yet to be investigated. Herein, we demonstrated that light radiation, by generating plasmon-based hot electrons and subsequently increasing the reduction rate of Ag⁺ in the system, in addition to enhancing the growth rate of nanocubes, causes twinned seeds, which these seeds are then converted into nanorods and right bipyramids. With shorter, higher energy wavelengths, Ag⁺ reduction progresses more quickly, resulting in structures with more twin planes. The overlap of the excitation wavelength and the band gap of Ag₂S clusters formed in the early stages of synthesis accelerates the rate of reaction at low-energy excitation. According to our findings, the surfactant polyvinylpyrrolidone acts as a photochemical relay to drive the growth of silver nanoparticles. Overall, this work emphasizes the impact of excitation light on polyol synthesis as a technique for generating Ag nanocubes of various sizes.

Recent Developments in Plasmonic Alloy Nanoparticles: Synthesis, Modelling, Properties and Applications

Despite the traditional plasmonic materials are counted on one hand, there are a lot of possible combinations leading to alloys with other elements of the periodic table, in particular those renowned for magnetic or catalytic properties. It is not a surprise, therefore, that nanoalloys are considered for their ability to open new perspectives in the panorama of plasmonics, representing a leading research sector nowadays. This is demonstrated by a long list of studies describing multiple applications of nanoalloys in photonics, photocatalysis, sensing and magneto-optics, where plasmons are combined with other physical and chemical phenomena. In some remarkable cases, the amplification of the conventional properties and even new effects emerged. However, this field is still in its infancy and several challenges must be overcome, starting with the synthesis (control of composition, crystalline order, size, processability, achievement of metastable phases and disordered compounds) as well as the modelling of the structure and properties (accuracy of results, reliability of structural predictions, description of disordered phases, evolution over time) of nanoalloys. To foster the research on plasmonic nanoalloys, here we provide an overview of the most recent results and developments in the field, organized according to synthetic strategies, modelling approaches, dominant properties and reported applications. Considering the several plasmonic nanoalloys under development as well as the large number of those still awaiting synthesis, modelling, properties assessment and technological exploitation, we expect a great impact on the forthcoming solutions for sustainability, ultrasensitive and accurate detection, information processing and many other fields.

Continuous spark plasma synthesis of Au/Co binary nanoparticles with tunable properties

We present here a scalable and environmentally friendly gas phase technique employing atmospheric pressure electrical spark discharge plasmas for the production of Au/Co binaries, an effective catalyst system for the decomposition of hydrogen-rich compounds, such as ammonium borane. We demonstrate that Au/Co alloy nanoparticles can be produced via the spark plasma-based technique. The possibility of varying the morphology and phase structure via real time heat treatment of the generated aerosol to form Au/Co/CoO particles with continuous control over a wide particle compositional range (from 24 to 64 at.% [Co]/([Co] + [Au]) content) is also demonstrated. Since our spark-based approach is proven to be capable of providing reasonable particle yields, these results may contribute to the transition of lab-scale, nanocatalyst-based hydrogen storage systems to real world applications.

Low-Dimensional Organic Crystals: From Precise Synthesis to Advanced Applications

Low-dimensional organic crystals (LOCs) have attracted increasing attention recently for their potential applications in miniaturized optoelectronics and integrated photonics. Such applications are possible owing to their tunable physicochemical properties and excellent charge/photon transport features. As a result, the precise synthesis of LOCs has been examined in terms of morphology modulation, large-area pattern arrays, and complex architectures, and this has led to a series of appealing structure-dependent properties for future optoelectronic applications. This review summarizes the recent advances in the precise synthesis of LOCs in addition to discussing their structure-property relationships in the context of optoelectronic applications. It also presents the current challenges related to organic crystals with specific structures and desired performances, and the outlook regarding their use in next-generation integrated optoelectronic applications.

Engineering Heterostructures of Layered Double Hydroxides and Metal Nanoparticles for Plasmon-Enhanced Catalysis

Artificially designed heterostructures formed by close conjunctions of plasmonic metal nanoparticles (PNPs) and non-plasmonic (2D) lamellar nanostructures are receiving extensive interest. The synergistic interactions of the nanounits induce the manifestation of localized surface plasmon resonance (LSPR) in plasmonic metals in the specific environment of the 2D-light absorbing matrix, impacting their potential in plasmon enhanced catalysis. Specifically, layered double hydroxides (LDH) with the advantages of their unique 2D-layered structure, tuned optical absorption, ease of preparation, composition diversity, and high surface area, have emerged as very promising candidates for obtaining versatile and robust catalysts. In this review, we cover the available PNPs/LDH heterostructures, from the most used noble-metals plasmonic of Au and Ag to the novel non-noble-metals plasmonic of Cu and Ni, mainly focusing on their synthesis strategies toward establishing a synergistic response in the coupled nanounits and relevant applications in plasmonic catalysis. First, the structure–properties relationship in LDH, establishing the desirable features of the 2D-layered matrix facilitating photocatalysis, is shortly described. Then, we address the recent research interests toward fabrication strategies for PNPs/support heterostructures as plasmonic catalysts. Next, we highlight the synthesis strategies for available PNPs/LDH heterostructures, how these are entangled with characteristics that enable the manifestation of the plasmon-induced charge separation effect (PICS), co-catalytic effect, or nanoantenna effect in plasmonic catalysis with applications in energy related and environmental photocatalysis. Finally, some perspectives on the challenges and future directions of PNPs/LDHs heterostructures to improve their performance as plasmonic catalysts are discussed.

Multifunctional plasmonic-magnetic nanoparticles for bioimaging and hyperthermia

Multicompartment nanoparticles have raised great interest for different biomedical applications, thanks to the combined properties of different materials within a single entity. These hybrid systems have opened new avenues toward diagnosis and combination therapies, thus becoming preferred theranostic agents. When hybrid nanoparticles comprise magnetic and plasmonic components, both magnetic and optical properties can be achieved, which are potentially useful for multimodal bioimaging, hyperthermal therapies and magnetically driven selective delivery. Nanostructures comprising iron oxide and gold are usually selected for biomedical applications, as they display size-dependent properties, biocompatibility, and unique physical and chemical characteristics that can be tuned through highly precise synthetic protocols. We provide herein an overview of the most recent synthetic protocols to prepare magnetic-plasmonic nanostructures made of iron oxide and gold, to then highlight the progress made on multifunctional magnetic-plasmonic bioimaging and heating-based therapies. We discuss the advantages and limitations of the various systems in these directions.

Tailored synthesis of ultra-stable Au@Pd nanoflowers with enhanced catalytic properties using cellulose nanocrystals

A green strategy for the synthesis of bimetallic core-shell Au@Pd nanoflowers (NFs) employing banana pseudo-stem-derived TEMPO-oxidized cellulose nanocrystals (TCNC) as both capping and shape-directing agent via seed-mediated method is presented. Flower-like nanostructures of Au@Pd bound to TEMPO-oxidized cellulose nanocrystals (TCNC-Au@Pd) were decorated on amino-functionalized graphene (NH₂-RGO) without losing their unique structure, allowing them to be deployed as an efficient, reusable and a green alternative heterogeneous catalyst. The decisive role of TCNC in the structural metamorphosis of nanoparticle morphology were inferred from the structural and morphology analyses. According to our study, the presence of -OH rich TCNC appears to play a pivotal role in the structured evolution of intricate nanostructure morphology. The feasibility of the bio-supported catalyst has been investigated in two concurrently prevalent model catalytic reactions, namely the oxygen reduction reaction (ORR) and the reduction of 4-nitrophenol, the best model reactions in fuel cell and industrial catalytic applications, respectively.

Plasmonic Hybrid Nanostructures in Photocatalysis: Structures, Mechanisms, and Applications

(Sun)Light is an abundantly available sustainable source of energy that has been used in catalyzing chemical reactions for several decades now. In particular, studies related to the interaction of light with plasmonic nanostructures have been receiving increased attention. These structures display the unique property of localized surface plasmon resonance, which converts light of a specific wavelength range into hot charge carriers, along with strong local electromagnetic fields, and/or heat, which may all enhance the reaction efficiency in their own way. These unique properties of plasmonic nanoparticles can be conveniently tuned by varying the metal type, size, shape, and dielectric environment, thus prompting a research focus on rationally designed plasmonic hybrid nanostructures. In this review, the term "hybrid" implies nanomaterials that consist of multiple plasmonic or non-plasmonic materials, forming complex configurations in the geometry and/or at the atomic level. We discuss the synthetic techniques and evolution of such hybrid plasmonic nanostructures giving rise to a wide variety of material and geometric configurations. Bimetallic alloys, which result in a new set of opto-physical parameters, are compared with core-shell configurations. For the latter, the use of metal, semiconductor, and polymer shells is reviewed. Also, more complex structures such as Janus and antenna reactor composites are discussed. This review further summarizes the studies exploiting plasmonic hybrids to elucidate the plasmonic-photocatalytic mechanism. Finally, we review the implementation of these plasmonic hybrids in different photocatalytic application domains such as H₂ generation, CO₂ reduction, water purification, air purification, and disinfection.

In Situ Observation of Structural and Optical Changes of Phase-Separated Ag-Cu Nanoparticles during a Dewetting Process via Transmission Electron Microscopy

Metallic nanoparticles with localized surface plasmon resonance have suitable optical properties for various applications such as optical filters, efficient photocatalysts, and high-sensitivity sensors. Phase-separated plasmonic nanoparticles with heterogeneous metastructures exhibit unique resonance features with separate optical field enhancements in each phase and hot electron transfer across the interface. Hence, interface engineering is crucial, particularly for catalyst applications. In this study, we investigated the evolution of the interface at high temperatures during nanoparticle formation using the dewetting method. We selected a Ag-Cu binary alloy system as a representative case and observed the nanoparticles via in situ transmission electron microscopy using a dedicated specimen heating holder. In situ elemental mapping revealed that the initial as-deposited film, which was composed of core-shell structures with Ag cores and Cu shells, converted into phase-separated Janus nanoparticles through marbled structures. A major structural change was observed at approximately 200 °C, which was in agreement with optical measurements. These results confirmed that the optical properties and metastructures of the phase-separated nanoparticles could be tuned by selecting the appropriate temperature and duration of the heat treatment.

An Overview on Coinage Metal Nanocluster-Based Luminescent Biosensors via Etching Chemistry

The findings from the synthetic mechanism of metal nanoclusters yield the etching chemistry based on coinage metal nanoclusters. The utilization of such chemistry as a tool that can alter the optical properties of metal nanoclusters has inspired the development of a series of emerging luminescent biosensors. Compared with other sensors, the luminescent biosensors have the advantages of being more sensitive, saving time and saving cost. We reviewed topics on the luminescent sensors based on the etching of emissive coinage metal nanoclusters. The molecules possessing varied etching ability towards metal nanoclusters were categorized with discussions of corresponding etching mechanisms. The understanding of etching mechanisms favored the discussions of how to use etching methods to detecting biochemical molecules. The emerging luminescent biosensors via etching chemistry also provided challenges and new opportunities for analytical chemistry and sensors.

Opportunities and Challenges for Alternative Nanoplasmonic Metals: Magnesium and Beyond

Materials that sustain localized surface plasmon resonances have a broad technology potential as attractive platforms for surface-enhanced spectroscopies, chemical and biological sensing, light-driven catalysis, hyperthermal cancer therapy, waveguides, and so on. Most plasmonic nanoparticles studied to date are composed of either Ag or Au, for which a vast array of synthetic approaches are available, leading to controllable size and shape. However, recently, alternative materials capable of generating plasmonically enhanced light-matter interactions have gained prominence, notably Cu, Al, In, and Mg. In this Perspective, we give an overview of the attributes of plasmonic nanostructures that lead to their potential use and how their performance is dictated by the choice of plasmonic material, emphasizing the similarities and differences between traditional and emerging plasmonic compositions. First, we discuss the materials limitation encapsulated by the dielectric function. Then, we evaluate how size and shape maneuver localized surface plasmon resonance (LSPR) energy and field distribution and address how this impacts applications. Next, biocompatibility, reactivity, and cost, all key differences underlying the potential of non-noble metals, are highlighted. We find that metals beyond Ag and Au are of competitive plasmonic quality. We argue that by thinking outside of the box, i.e., by looking at nonconventional materials such as Mg, one can broaden the frequency range and, more importantly, combine the plasmonic response with other properties essential for the implementation of plasmonic technologies.

Single-particle analysis of micro/nanoplastics by SEM-Raman technique

Micro/nanoplastics (MNPs) have received global concern due to their widespread contamination, ingestion in organisms, and the ability to cross the biological barrier. Although MNPs have been detected in a variety of ecosystems, the identification of single MNPs remains an unsolved challenge. Herein, for the first time, scanning electron microscope (SEM) coupled with surface-enhanced Raman spectroscopy (SERS), which combined the advantages of ultrahigh spatial resolution of SEM and structural fingerprint of Raman spectroscopy, was proposed to identify MNPs at single-particle level. Under the optimum conditions, the polystyrene (PS) MNPs with sizes of 500 nm and 1 μm were identified by the image of SEM and fingerprint peaks of Raman spectroscopy. Additionally, the applicability of the method in different sample matrices and for other types of MNPs such as poly-methyl methacrylate (PMMA) with the sizes of 300 nm, 1 μm were validated. This method is simple, rapid and effective and is likely to provide an essential tool to identify other micro/nanoparticles in addition to MNPs.

Solid-State Reaction Synthesis of Nanoscale Materials: Strategies and Applications

Nanomaterials (NMs) with unique structures and compositions can give rise to exotic physicochemical properties and applications. Despite the advancement in solution-based methods, scalable access to a wide range of crystal phases and intricate compositions is still challenging. Solid-state reaction (SSR) syntheses have high potential owing to their flexibility toward multielemental phases under feasibly high temperatures and solvent-free conditions as well as their scalability and simplicity. Controlling the nanoscale features through SSRs demands a strategic nanospace-confinement approach due to the risk of heat-induced reshaping and sintering. Here, we describe advanced SSR strategies for NM synthesis, focusing on mechanistic insights, novel nanoscale phenomena, and underlying principles using a series of examples under different categories. After introducing the history of classical SSRs, key theories, and definitions central to the topic, we categorize various modern SSR strategies based on the surrounding solid-state media used for nanostructure growth, conversion, and migration under nanospace or dimensional confinement. This comprehensive review will advance the quest for new materials design, synthesis, and applications.

Low cost, robust, environmentally friendly, wood supported 3D-hierarchical Cu3SnS4 for efficient solar powered steam generation

Solar steam generation has great potential in alleviating freshwater crises, particularly in regions with accessible seawater and abundant insolation. Inexpensive, efficient, and eco-friendly photothermal materials are desired to fabricate sunlight-driven evaporation devices. Here, we have designed an economical strategy to fabricate a high-performance wood-based solar steam generation device. In current study, 3D-hierarchical Cu₃SnS₄ has been loaded on wood substrates of variable sizes via an in-situ solvothermal method. Considering the water transportation capacity and thermal insulation property of wood, an enhanced light absorption was achieved by a uniform coating of Cu₃SnS₄ on the inside and outside of the 3D porous structure of the wood. Thanks for the synergistic effect of Cu₃SnS₄ and wood substrate, the obtained composite endorsed high-performance solar steam generation with a steam generation efficiency of 90% and an evaporation rate as high as 1.35 kg m^-2h^-1 under one sun.

Light activation of gold nanorods but not gold nanospheres enhance antibacterial effect through photodynamic and photothermal mechanisms

Plasmonic nanomaterials of gold and silver have been reported to have antibacterial effect. In this study, three gold nanomaterials (NMs) of different aspect rations (Gold nanospheres (AuNSs, aspect ratio 1), and two gold nanorods (AuNRs636, aspect ratio 2.79; AuNRs772, aspect ratio 3.42)) and silver nanoparticles (AgNPs) were synthesized, characterized and the effect of incandescent light on their antibacterial properties were examined. Bacterial inactivation during photoinactivation of nanomaterials and antibacterial mechanisms (biotic ROS, membrane potential, membrane damage) were investigated using Escherichia coli ATCC 25922, Staphylococcus aureus ATCC 25923, Salmonella enterica serovar Typhimurium, and methicillin-resistant S. aureus. The results indicated that AuNSs had no antibacterial activity in the tested concentration (0.49-250 μg/mL), while AuNR636 and AuNRs772 showed significant bactericidal effect on all tested bacteria. Notably, AuNRs636 presented higher antibacterial effect than AuNRs772, which could result from higher surface reactivity of AuNRs636 owing to higher dangling bonds. Further studies showed that AuNRs but not AuNSs generated hydroxyl radicals (·OH) (photodynamic effect) and photothermal effect when exposed to incandescent light. The combined photodynamic and photothermal effect resulted in bacterial inactivation through cell membrane damage, lowering of cell membrane potential and DNA degradation. In summary, this investigation showed that Au NRs but not Au NSs exhibit photodynamic and photothermal effects suggesting the potential of fabricating material surfaces with Au NRs for photoactivated bacterial inactivation.

High-Throughput Surface-Enhanced Raman Scattering for Screening Chemical Sensor Candidates Enabled by Bipolar Electrochemistry

A variety of hydrothermal or electrochemical methods have been explored to prepare noble metal nanostructures as surface-enhanced Raman scattering (SERS) substrates. However, most of those metallic nanoarrays are structurally homogeneous, which makes it laborious to select the high-performance substrates for particular Raman sensing purposes. Here, a high-throughput SERS imaging strategy is demonstrated for the first time for screening chemical sensors with sub-nanomolar sensitivities. Bipolar electrochemistry was applied to generate Au or Au-Ag gradient nanoarrays with diverse chemical compositions, morphologies, and particle dimensions ranging from several nanometers to micrometers. The selected "hot-spots" on the Au-Ag alloy nanoarray exhibited a 660-fold enhancement in SERS intensity compared to those on the pure Au gradient nanoarray. The SERS screening of 4-aminothiophenol, 4-nitrothiophenol, and 4-mercaptobenzoic acid was carried out that provided a limit of detection (LOD) between 1 and 5 pM. The distinctive LODs among three thiophenolic Raman probes are ascribed to the differences in the affinity of the probe to the alloy, orientation of the metal-ligand monolayer, or plasmonic environment of the nanoarray surface. As a continuous, rapid, and cost-effective manner to fabricate transitional nanostructures and screen out SERS responsive sites, this method not only facilitates controllable synthesis of noble metal nanoarrays but has the potential to provide an alternative tool for ultrasensitive chemical sensing on a wide range of bimetallic substrates.

Emerging Strategies in Enhancing Singlet Oxygen Generation of Nano-Photosensitizers Toward Advanced Phototherapy

The great promise of photodynamic therapy (PDT) has thrusted the rapid progress of developing highly effective photosensitizers (PS) in killing cancerous cells and bacteria. To mitigate the intrinsic limitations of the classical molecular photosensitizers, researchers have been looking into designing new generation of nanomaterial-based photosensitizers (nano-photosensitizers) with better photostability and higher singlet oxygen generation (SOG) efficiency, and ways of enhancing the performance of existing photosensitizers. In this paper, we review the recent development of nano-photosensitizers and nanoplasmonic strategies to enhance the SOG efficiency for better PDT performance. Firstly, we explain the mechanism of reactive oxygen species generation by classical photosensitizers, followed by a brief discussion on the commercially available photosensitizers and their limitations in PDT. We then introduce three types of new generation nano-photosensitizers that can effectively produce singlet oxygen molecules under visible light illumination, i.e., aggregation-induced emission nanodots, metal nanoclusters (< 2 nm), and carbon dots. Different design approaches to synthesize these nano-photosensitizers were also discussed. To further enhance the SOG rate of nano-photosensitizers, plasmonic strategies on using different types of metal nanoparticles in both colloidal and planar metal-PS systems are reviewed. The key parameters that determine the metal-enhanced SOG (ME-SOG) efficiency and their underlined enhancement mechanism are discussed. Lastly, we highlight the future prospects of these nanoengineering strategies, and discuss how the future development in nanobiotechnology and theoretical simulation could accelerate the design of new photosensitizers and ME-SOG systems for highly effective image-guided photodynamic therapy.

Surface-Functionalized Au-Pd Nanorods with Enhanced Photothermal Conversion and Catalytic Performance

Bimetallic nanostructures comprising plasmonic and catalytic components have recently emerged as a promising approach to generate a new type of photo-enhanced nanoreactors. Most designs however concentrate on plasmon-induced charge separation, leaving photo-generated heat as a side product. This work presents a photoreactor based on Au-Pd nanorods with an optimized photothermal conversion, which aims to effectively utilize the photo-generated heat to increase the rate of Pd-catalyzed reactions. Dumbbell-shaped Au nanorods were fabricated via a seed-mediated growth method using binary surfactants. Pd clusters were selectively grown at the tips of the Au nanorods, using the zeta potential as a new synthetic parameter to indicate the surfactant remaining on the nanorod surface. The photothermal conversion of the Au-Pd nanorods was improved with a thin layer of polydopamine (PDA) or TiO₂. As a result, a 60% higher temperature increment of the dispersion compared to that for bare Au rods at the same light intensity and particle density could be achieved. The catalytic performance of the coated particles was then tested using the reduction of 4-nitrophenol as the model reaction. Under light, the PDA-coated Au-Pd nanorods exhibited an improved catalytic activity, increasing the reaction rate by a factor 3. An analysis of the activation energy confirmed the photoheating effect to be the dominant mechanism accelerating the reaction. Thus, the increased photothermal heating is responsible for the reaction acceleration. Interestingly, the same analysis shows a roughly 10% higher reaction rate for particles under illumination compared to under dark heating, possibly implying a crucial role of localized heat gradients at the particle surface. Finally, the coating thickness was identified as an essential parameter determining the photothermal conversion efficiency and the reaction acceleration.

Therapeutic implications of nanodrug and tissue engineering for retinal pigment epithelium-related diseases

The retinal pigment epithelium (RPE), as a single layer of cells that performs multiple functions posteriorly in the eye, is a promising target site for the prevention and treatment of several clinical diseases, including proliferative diabetic retinopathy, age-related macular degeneration, chorionic neovascularization, and retinitis pigmentosa. In recent decades, several nanodrug delivery platforms and tissue-engineered RPE have been widely developed to treat RPE-related diseases. This work summarizes the recent advances in nanoplatforms and tissue engineering scaffolds developed in these fields. The diseases associated with pathological RPE and their common therapy strategies are first introduced. Then, the recent progress made with a variety of drug delivery systems is presented, with an emphasis on the modification strategies of nanomaterials for targeted delivery. Tissue engineering-mediated RPE transplantation for treating these diseases is subsequently described. Finally, the clinical translation challenges in these fields are discussed in depth. This article will offer readers a better understanding of emerging nanotechnology and tissue engineering related to the treatment of RPE-related diseases and could facilitate their widespread use in experiments in vivo and in clinical applications.

Bio-electron transfer modulated localized surface plasmon resonance biosensing with charge density monitoring

The analysis of reactant at different regions of the bioreaction interface is significant for the study on the influence of interface condition on bioreaction. In this study, we proposed a localized surface plasmon resonance (LSPR) biosensing platform for local charge density monitoring and corresponding analytes detection based on the bio-electron transfer modulation of plasmon resonance. Core-shell nanocomposites of polyaniline coated gold nanoparticles were synthesized for the enhanced sensitivity of plasmon resonance to applied electric potential. Tin-doped indium oxide (ITO) substrates modified with the nanocomposites were used as LSPR chip for optical and electrochemical measurements simultaneously. The charge sensitivity of LSPR was verified with external electric potential modulation theoretically and experimentally. Through layer-by-layer self-assembly immobilization of glucose oxidase (GOD) on the LSPR chips, the charge transfer monitoring during the bioreaction of glucose catalysis was further demonstrated based on the bio-electron transfer modulation of LSPR. By equivalent circuit method, the charge density of the LSPR chip were detected with optical extinction peak shifts, and the limit of detection was about 0.51 μC/cm². This bio-electron transfer modulated LSPR provides a promising approach for the detection of spatial charge densities and the evaluation of bioreaction substances at different region of single chip.

A theoretical approach on the ability of functionalized gold nanoparticles for detection of Cd2

Cadmium (Cd) as a toxic element that is widely present in water, soil, and air has important effects on human health, therefore proposing an accurate and selective method for detection of this element is of importance. In this article, by employing full atomistic molecular dynamics (MD) simulations and density functional theory dispersion corrected (DFT-D3) calculations, the effects of 6-mercaptonicotinic acid (MNA) and L-cysteine (CYS) on the stability of gold nanoparticles (AuNPs) and their sensitivity against Cd²⁺ were investigated. The obtained results indicate that pure AuNPs are not stable in water, while functionalized AuNPs with CYS and MNA groups have considerable stability without aggregation. In other words, the functional groups on the surface of AuNPs elevate their resistance against aggregation by an increase in the repulsive interactions between the gold nanoparticles. Moreover, functionalized AuNPs have considerable ability for selective detection of Cd²⁺ in the presence of different metal ions. Based on the MD simulation results, MNA-CYS-AuNPs (functionalized AuNPs with both functional groups) have the maximum sensitivity against Cd²⁺ in comparison with MNA-AuNPs and CYS-AuNPs due to the strong electrostatic interactions. DFT-D3 calculations reveal that the most probable interactions between the metal ions and functional groups are electrostatic, and Cd²⁺ can aggregate functionalized AuNPs due to strong electrostatic interactions with MNA and CYS groups. Moreover, charge transfer and donor-acceptor analyses show that molecular orbital interactions between the functional groups and Cd²⁺ can be considered as the driving force for AuNPs aggregation. A good agreement between the theoretical results and experimental data confirms the importance of the molecular modeling methods as a fast scientific protocol for designing new functionalized nanoparticles for application in different fields.

Influence of Annealing Atmospheres on Photoelectrochemical Activity of TiO2 Nanotubes Modified with AuCu Nanoparticles

In this article, we studied the annealing process of AuCu layers deposited on TiO2 nanotubes (NTs) conducted in various atmospheres such as air, vacuum, argon, and hydrogen in order to obtain materials active in both visible and UV-vis ranges. The material fabrication route covers the electrochemical anodization of a Ti plate, followed by thin AuCu film magnetron sputtering and further thermal treatment. Scanning electron microscopy images confirmed the presence of spherical nanoparticles (NPs) formed on the external and internal walls of NTs. The optical and structural properties were characterized using UV-vis, X-ray diffraction, and X-ray photoelectron spectroscopies. It was proved that thermal processing under the argon atmosphere leads to the formation of a CuAuTi alloy in contrast to materials fabricated in air, vacuum, and hydrogen. The electrochemical measurements were carried out in NaOH using cyclic voltammetry, linear voltammetry, and chronoamperometry. The highest photoactivity was achieved for materials thermally treated in the argon atmosphere. In addition, the Mott-Schottky analysis was performed for bare TiO2 NTs and TiO2 NTs modified with gold copper NPs indicating a shift in the flatband potential. Overall, thermal processing resulted in changes in optical and structural properties as well as electrochemical and photoelectrochemical activities.

Gold Nanorods: The Most Versatile Plasmonic Nanoparticles

Gold nanorods (NRs), pseudo-one-dimensional rod-shaped nanoparticles (NPs), have become one of the burgeoning materials in the recent years due to their anisotropic shape and adjustable plasmonic properties. With the continuous improvement in synthetic methods, a variety of materials have been attached around Au NRs to achieve unexpected or improved plasmonic properties and explore state-of-the-art technologies. In this review, we comprehensively summarize the latest progress on Au NRs, the most versatile anisotropic plasmonic NPs. We present a representative overview of the advances in the synthetic strategies and outline an extensive catalogue of Au-NR-based heterostructures with tailored architectures and special functionalities. The bottom-up assembly of Au NRs into preprogrammed metastructures is then discussed, as well as the design principles. We also provide a systematic elucidation of the different plasmonic properties associated with the Au-NR-based structures, followed by a discussion of the promising applications of Au NRs in various fields. We finally discuss the future research directions and challenges of Au NRs.

Sintering-Based In-Situ Synthesis and Characterization by TEM of Noble Metal Nanoparticles for Ceramic Glaze Color Control

Gold and silver salt mixtures are incorporated in ceramic glazes for in situ development of mixtures of gold and silver nanoparticles (NPs) that subsequently allow for a wide spectrum of low metal loading color control within ceramic materials. Prior work has shown that gold NPs can be used to create vibrant, color-rich red pigments in high-temperature ceramic and glass applications, though the achievable diameter of the gold NP ultimately limits the available range of color. The current study significantly expands color control from traditional gold nanoparticle red through silver nanoparticle green via the alteration of gold-to-silver salt ratios incorporated in the glaze formulations prior to sintering. Nanoparticle-based coloring systems are tested in both oxidative and reductive firing atmospheres. While the oxidation environment is found to be prohibitive for silver NP stability, the reductive atmosphere is able to form and sustain mixtures of gold and silver NPs across a wide color spectrum. All glazes are analyzed via reflectance spectrometry for color performance and samples are characterized via TEM and EDS for composition and sizing trends. This study creates new groundwork for a color-controlled NP system based on noble metal ratio blends that are both nontoxic and achieved with radically lower metal pigment loading than traditional glazes.