Composite Titanium Dioxide Nanomaterials

Recent advances in ternary Z-scheme photocatalysis on graphitic carbon nitride based photocatalysts

Due to its excellent photocatalytic performance over the last few years, graphitic-like carbon nitride (g-C3N4) has garnered considerable notice as a photocatalyst. Nevertheless, several limitations, including small surface area, the rates at which photo-generated electrons and holes recombine are swift, and the inefficient separation and transport of photoexcited carriers continue to impede its solar energy utilization. To overcome those limitations in single-component g-C3N4, constructing a heterogeneous photocatalytic system has emerged as an effective way. Among the various studies involving the incorporation of hetero composite materials to design heterojunctions, among the most promising approaches is to assemble a Z-scheme photocatalytic configuration. The Z-scheme configuration is essential because it facilitates efficient photocarrier separation and exhibits superior redox ability in separated electrons and holes. Moreover, ternary composites have demonstrated enhanced photocatalytic activities and reinforced photostability. Ternary Z-scheme heterostructures constructed with g-C3N4 possess all the above-mentioned merits and provide a pioneering strategy for implementing photocatalytic systems for environmental and energy sustainability. A summary of the latest technological advancements toward design and fabrication in ternary all-solid-state Z-scheme (ASSZ) and direct Z-scheme (DZ) photocatalysts built on g-C3N4 is presented in this review. Furthermore, the review also discusses the application of ternary Z-scheme photocatalytic architecture established on g-C3N4.

Recent advances in the use of composite titanium dioxide nanomaterials in the food industry

Titanium dioxide (TiO2 ) nanomaterials have attracted significant attention due to their good biocompatibility and potential for multifunctional applications. In the last few years, there has been growing interest in the use of TiO2 nanomaterials in the food industry. However, a systematic review of the synthesis methods, properties, and applications of TiO2 nanomaterials in the food industry is lacking. In this review, we provide a summary of the synthesis and properties of TiO2 nanomaterials and their composites, with a focus on their applications in the food industry. We also discuss the potential benefits and risks of using TiO2 nanomaterials in food applications. This review aims to promote food innovation and improve food quality and safety.

An efficient multi-functional ternary reusable nanocomposite based on chitosan@TiO2@Ag NP immobilized on cellulosic fiber as a support substrate for wastewater treatment

To effectively remove heavy metals, organic contaminants, and pathogenic bacteria from wastewater, an efficient multi-functional ternary nanocomposite based on chitosan (CS), titanium dioxide (TiO2 NP), and silver nanoparticles (Ag NP) was prepared. Different tools were used to confirm the successful synthesis of the CS/TiO2 NP/Ag NP nanocomposite. Then, the CS/TiO2 NP/Ag NPnanocomposite was immobilized on the cellulosic fiber as a support substrate for its easy removal and reuse. On a lab scale, CS/TiO2 NP/Ag NP nanocomposite@cellulosic fiber was used to remove Cu (II) ions, methyl orange (MO), and methylene blue (MB), as well as inhibit microbes. The results demonstrate that the greatest removal of Cu (II) ions was 95 % at a concentration of 50 mg/L, pH 5, a temperature of 25 °C, an agitation speed of 200 rpm with 1 g adsorbent dose, and a contact time of 150 min. The pseudo-second-order model explained the batch adsorption kinetics well, while the Langmuir model explained the adsorption isotherm well with an adsorption capacity of 7.71 mg/g. Adsorption thermodynamic parameters revealed that adsorption is a spontaneous, exothermic, increased randomness, and non-specific chemisorption approach. The photodegradation of MO and MB by CS/TiO2 NP/Ag NP nanocomposite@cellulosic fiber was investigated. The results reveal that at pH 3, the MO dye showed the highest photodegradation percentage (90 %), while the MB dye displayed the highest photodegradation percentage (94 %) at pH 11, after an irradiation time of 120 min under visible light. The rate constants for MO and MB were 0.01218 and 0.01412 min-1, respectively. The results antimicrobial activities showed that the CS/TiO2 NP/Ag NP nanocomposite@cellulosic fiber showed excellent antibacterial activity against S. aureus (95 ± 2 %) and E. coli (93 ± 3 %) as well as good antifungal activity against C. albicans (77 ± 2 %).

Fabrication of Ru loaded MgB2 with guar gum hybrid for photocatalytic degradation of crystal violet

Today, dyes/pigment-based materials are confronting a serious issue in harming marine ecology. Annihilate these serious water pollutants using photoactive 2D nanohybrid catalysts showed promising comparativeness over available photocatalysts. In the present work, a facile route to decorate Ruthenium (Ru) on 2D MgB2 flower-like nanostructures was developed via ecofriendly guar gum biopolymer substantial template (MgB2/GG@Ru NFS) and its photocatalytic performance was reported. Synthesis of MgB2@Ru, MgB2/GG@Ru NFS and commercial MgB2, was studied by FTIR, XRD, FE-SEM, EDX, AFM, TEM, UV-vis spectra, and XPS analysis. From the results, the MgB2/GG@Ru NFS exhibited a superior photocatalytic performance (99.7 %) than its precursors MgB2@Ru (79.7 %), and MgB2 (53.7 %), with the degradation efficiency of the crystal violet (CV) within 100 min under visible light irradiation. The proposed photo-catalyst MgB2/GG@Ru NFS showed negligible loss of photocatalytic activity even after five successive cycles, revealing its reusability and enhanced stability due to the network structure. The photocatalytic mechanism for MgB2/GG@Ru NFS was evaluated by trapping experiment of active species, verifying that superoxide (O2-) and electron (e-) contributed significant role in the dye degradation.

Atomically accurate site-specific ligand tailoring of highly acid- and alkali-resistant Ti(iv)-based metallamacrocycle for enhanced CO2 photoreduction

Skillfully engineering surface ligands at specific sites within robust clusters presents both a formidable challenge and a captivating opportunity. Herein we unveil an unprecedented titanium-oxo cluster: a calix[8]arene-stabilized metallamacrocycle (Ti16L4), uniquely crafted through the fusion of four "core-shell" {Ti4@(TBC[8])(L)} subunits with four oxalate moieties. Notably, this cluster showcases an exceptional level of chemical stability, retaining its crystalline integrity even when immersed in highly concentrated acid (1 M HNO3) and alkali (20 M NaOH). The macrocycle's surface unveils four specific, customizable μ2-bridging sites, primed to accommodate diverse carboxylate ligands. This adaptability is highlighted through deliberate modifications achieved by alternating crystal soaking in alkali and carboxylic acid solutions. Furthermore, Ti16L4 macrocycles autonomously self-assemble into one-dimensional nanotubes, which subsequently organize into three distinct solid phases, contingent upon the specific nature of the four μ2-bridging ligands. Notably, the Ti16L4 exhibit a remarkable capacity for photocatalytic activity in selectively reducing CO2 to CO. Exploiting the macrocycle's modifiable shell yields a significant boost in performance, achieving an exceptional maximum CO release rate of 4.047 ± 0.243 mmol g-1 h-1. This study serves as a striking testament to the latent potential of precision-guided surface ligand manipulation within robust clusters, while also underpinning a platform for producing microporous materials endowed with a myriad of surface functionalities.

Peculiarities of the Structure of Au-TiO2 and Au-WO3 Plasmonic Nanocomposites

As nanotechnology continues to advance, the study of nanocomposites and their unique properties is at the forefront of research. There are still various blank spots in understanding the behavior of such composite materials, especially regarding plasmonic effects like localized surface plasmon resonance (LSPR) which is essential for developing advanced nanotechnologies. In this work, we explore the structural properties of composite thin films consisting of oxide matrices and gold nanoparticles (Au NPs), which were prepared by radio-frequency magnetron sputtering. Titanium dioxide (TiO2) and tungsten trioxide (WO3) were chosen as the host matrices of the composites. Such composite thin films owing to the presence of Au NPs demonstrate the LSPR phenomenon in the visible region. It is shown, that spectroscopic study, in particular, Raman spectroscopy can reveal peculiar features of structures of such composite systems due to LSPR and photoluminescence (PL) of Au NPs in the visible spectrum. In particular, defect peaks of TiO2 (700-720 cm-1) or WO3 (935 cm-1) in Raman spectra can be clearly observed when the samples are illuminated with a 633 nm excitation laser. Excitation with 532 nm leads to a decrease in the intensity of the defect peak, which totally disappears at 473 nm excitation. Such dependences of the defect peaks on excitation laser wavelength are probably related to the polarization of the matrix's defective regions close to the interface with gold NPs.

The Photocatalytic Performance of P, Cl Doped Carboxylated Multiwalled Carbon Nanotube Modified Graphitic Carbon Nitride

Graphitized carbonitride (g-C₃N₄) is widely used in CO₂ reduction, hydrogen production, and degradation of toxic chemical dyes and antibiotics. It is a kind of photocatalytic material with excellent performance, and it has the advantages of being safe and nontoxic, having a suitable band gap (2.7 eV), and having a simple preparation and high stability, but because of its fast optical recombination speed and low visible light overutilization, the multifunctional application of g-C₃N₄ is seriously hindered. Compared with pure g-C₃N₄, MWCNTs/g-C₃N₄ have a red-shift in the visible range and a strong absorption in the visible region. Melamine and carboxylated multiwalled carbon nanotubes were used as raw materials to successfully prepare CMWCNT modified g-C₃N₄ doped with P, Cl by a high temperature calcination method. The effect of the addition amount of P, Cl on the photocatalytic performance of modified g-C₃N₄ was studied. The experimental results show that the multiwalled carbon nanotubes can accelerate the electron migration, and the doping of P, Cl elements can change the energy band structure of g-C₃N₄ and reduce the band gap. Through fluorescence analysis and photocurrent analysis, it is known that the incorporation of P, Cl reduces the recombination efficiency of photogenerated electron-hole pairs. In order to explore the application in the degradation of chemical dyes, the photocatalytic degradation efficiency of RhB under visible light was studied. The photocatalytic performance of the samples was evaluated by photodecomposition of aquatic hydrogen. The results showed that when the amount of ammonium dihydrogen phosphate was 10 wt %, the photocatalytic degradation efficiency was the highest, which was 21.13 times higher than that of g-C₃N_4.

Daylight Photoactive TiO2 Sol-Gel Nanoparticles: Sustainable Environmental Contribution

Visible-light-photoactive titania micro- or nanoparticles excel in a wide range of industrial areas, particularly in environmental remediation. The sol-gel methodology is one pivotal technique which has been successfully used to synthesize either crystalline and amorphous TiO₂ micro- and nanoparticles due to its outstanding chemical simplicity and versatility, along with the green chemistry approach. This short review aims to collect and discuss the most recent developments in visible-light-photoactive titania-based nanoparticles in the environmental remediation area. Titania co-doping, titania composite design, and, recently, amorphous networks have been the most used strategies to address this goal. Finally, a prediction regarding the future of these fields is given.

TiO2-NGQD composite photocatalysts with switchable photocurrent response

A series of titanium dioxide-nitrogen doped graphene quantum dot (TiO₂-NGQD) composite photocatalysts were synthesized through a simple hydrothermal reaction with varied NGQD content. Through a proposed Z-Scheme heterojunction, the composites were able to achieve increased photocurrent generation and photocatalytic degradation of phenol under both full spectrum and visible only illumination. The prepared composites were able to switch from anodic to cathodic photocurrent by changing the light source from full spectrum to visible wavelengths. The photocatalytic capabilities of the composites were tested by degrading phenol and this was monitored via nuclear magnetic resonance. All composites outperformed the commercial standard P25 TiO₂ under both full spectrum and visible irradiation, with the 8 wt% NGQD composite showing a visible improvement of over 600% compared to P25. With the ability to manipulate the generation of majority charge carriers, TiO₂-NGQDs have significant potential not only in photocatalysis, but in far reaching applications such as energy harvesting and water splitting.

Noble Metal Nanoparticle-Loaded Porphyrin Hexagonal Submicrowires Composites (M-HW): Photocatalytic Synthesis and Enhanced Photocatalytic Activity

Surface plasmon resonance (SPR) photocatalysts have attracted considerable attention because of their strong absorption capacity of visible light and enhanced photogenic carrier separation efficiency. However, the separate production of metal nanoparticles (NPs) and semiconductors limits the photogenic charge transfer. As one of the most promising organic photocatalysts, porphyrin self-assemblies with a long-range ordered structure-enhance electron transfer. In this study, plasmonic noble metal-based porphyrin hexagonal submicrowires composites (M-HW) loaded with platinum (Pt), silver (Ag), gold (Au), and palladium (Pd) NPs were synthesized through a simple in situ photocatalytic method. Homogeneous and uniformly distributed metal particles on the M-HW composites enhanced the catalytic or chemical properties of the organic functional nanostructures. Under the same loading of metal NPs, the methyl orange photocatalytic degradation efficiency of Ag-HW [k_Ag-HW (0.043 min^-1)] composite was three times higher than that of HW, followed by Pt-HW [k_Pt-HW (0.0417 min^-1)], Au-HW [k_Au-HW (0.0312 min^-1)], and Pd-HW [k_Pd-HW (0.0198 min^-1)]. However, the rhodamine B (RhB) and eosin B photocatalytic degradations of Pt-HW were 4 times and 2.6 times those of HW, respectively. Finally, the SPR-induced electron injection, trapping, and recombination processes of the M-HW system were investigated. These results showed that M-HW plasmonic photocatalysts exhibited excellent photocatalytic performances, making them promising materials for photodegrading organic pollutants.

Recent Advances in Black TiO2 Nanomaterials for Solar Energy Conversion

Titanium dioxide (TiO₂) nanomaterials have been widely used in photocatalytic energy conversion and environmental remediation due to their advantages of low cost, chemical stability, and relatively high photo-activity. However, applications of TiO₂ have been restricted in the ultraviolet range because of the wide band gap. Broadening the light absorption of TiO₂ nanomaterials is an efficient way to improve the photocatalytic activity. Thus, black TiO₂ with extended light response range in the visible light and even near infrared light has been extensively exploited as efficient photocatalysts in the last decade. This review represents an attempt to conclude the recent developments in black TiO₂ nanomaterials synthesized by modified treatment, which presented different structure, morphological features, reduced band gap, and enhanced solar energy harvesting efficiency. Special emphasis has been given to the newly developed synthetic methods, porous black TiO₂, and the approaches for further improving the photocatalytic activity of black TiO₂. Various black TiO₂, doped black TiO₂, metal-loaded black TiO₂ and black TiO₂ heterojunction photocatalysts, and their photocatalytic applications and mechanisms in the field of energy and environment are summarized in this review, to provide useful insights and new ideas in the related field.

Titanium(IV) Surface Complexes Bearing Chelating Catecholato Ligands for Enhanced Band-Gap Reduction

Protonolysis reactions between dimethylamido titanium(IV) catecholate [Ti(CAT)(NMe₂)₂]₂ and neopentanol or tris(tert-butoxy)silanol gave catecholato-bridged dimers [(Ti(CAT)(OCH₂tBu)₂)(HNMe₂)]₂ and [Ti(CAT){OSi(OtBu)₃}₂(HNMe₂)₂]₂, respectively. Analogous reactions using the dimeric dimethylamido titanium(IV) (3,6-di-tert-butyl)catecholate [Ti(CATtBu₂-3,6)(NMe₂)₂]₂ yielded the monomeric Ti(CATtBu₂-3,6)(OCH₂tBu)₂(HNMe₂)₂ and Ti(CATtBu₂-3,6)[OSi(OtBu)₃]₂(HNMe₂)₂. The neopentoxide complex Ti(CATtBu₂-3,6)(OCH₂tBu)₂(HNMe₂)₂ engaged in further protonolysis reactions with Si-OH groups and was consequentially used for grafting onto mesoporous silica KIT-6. Upon immobilization, the surface complex [Ti(CATtBu₂-3,6)(OCH₂tBu)₂(HNMe₂)₂]@[KIT-6] retained the bidentate chelating geometry of the catecholato ligand. This convergent grafting strategy was compared with a sequential and an aqueous approach, which gave either a mixture of bidentate chelating species with a bipodally anchored Ti(IV) center along with other physisorbed surface species or not clearly identifiable surface species. Extension of the convergent and aqueous approaches to anatase mesoporous titania (m-TiO₂) enabled optical and electronic investigations of the corresponding surface species, revealing that the band-gap reduction is more pronounced for the bidentate chelating species (convergent approach) than for that obtained via the aqueous approach. The applied methods include X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, and solid-state UV/vis spectroscopy. The energy-level alignment for the surface species from the aqueous approach, calculated from experimental data, accounts for the well-known type II excitation mechanism, whereas the findings indicate a distinct excitation mechanism for the bidentate chelating surface species of the material [Ti(CATtBu₂-3,6)(OCH₂tBu)₂(HNMe₂)₂]@[m-TiO₂].

Simultaneous photooxidation and photoreduction of phenol and Cr(VI) ions using titania modified with nanosilica

The photocatalytic process of phenol oxidation and Cr(VI) reduction in the presence of nano-silica modified titania was carried out. The activity of composites was tested using two different light sources. The photocatalysts with 10% of nanosilica showed the highest activity. The calcination temperature (200–800 oC) significantly determined the sensitivity of the obtained materials to the light source used. Photocatalysts alternately adsorbed and desorbed Cr(VI) ions from the reaction mixture during irradiation. In the one-component mixture, complete oxidation of phenol was observed using material calcined at 650 oC, after 3 h of UV-VIS irradiation. In the reaction mixture of Cr(VI) and phenol, the highest activity was demonstrated by photocatalyst calcined at 300 oC. The concentration of phenol decreased in proportion to the decrease of chromium ions. The obtained titania-silica composites showed oxidizing properties towards phenol and reductive properties toward Cr(VI) ions.

TiO2 as a Nanozyme Mimicking Photolyase to Repair DNA Damage

Cyclobutane pyrimidine dimer (CPD) is the most abundant DNA photolesion, and it can be repaired by photolyases based on electron-transfer mechanisms. However, photolyase is absent in the human body and lacks stability for applications. Can one develop natural enzyme mimetics utilizing nanoparticles (termed nanozymes) to mimic photolyase in repairing DNA damage? Herein, we observe the successful reversal of thymine dimer T<>T to normal T base by TiO₂ under UVA irradiation. Time-resolved spectroscopy provides direct evidence that the photogenerated electron of TiO₂ transfers to T<>T, causing structural instability and initiating the repair process. T-T^- would then undergo bond cleavage to form T and T^-, and T^- returns an electron to TiO₂, finishing the photocatalytic cycle. For the first time, TiO₂ is discovered to exhibit photocatalytic properties similar to those of natural enzymes, pointing to its extraordinary application potential as a nanozyme to mimic photolyase in repairing DNA damage.

ZIF-8 metal organic framework composites as hydrogen evolution reaction photocatalyst: A review of the current state

In the past decade, extensive research has been devoted to synthesis of ZIF-8 materials for catalytic applications. As physico-chemical properties are synthesis-dependent, this review explores different synthesis strategies based the solvent and solvent-free synthesis of zeolitic imidazole framework. Accordingly, the effect of several parameters on the ZIF-8 synthesis were discussed including solvent, deprotonating agents, precursors ratio is delivered. Additionally, the advantages and disadvantages of each synthesis have been discussed and assessed. ZIF-8 textural and structural properties justify its wide use as a stable high surface area MOF in aqueous catalytic reactions. This review includes the applicatios of ZIF-8 materials in photocatalytic hydrogen evolution reaction (HER). The efficiency of the reviewed materials was fairly assessed. Finally, Limitations, drawbacks and future challenges were fully debated to ensure the industrial viability of the ZIFs.

TiO2 Nanoparticles and Their Effects on Eukaryotic Cells: A Double-Edged Sword

Nanoparticulate TiO₂ (TiO₂ NPs) is a widely used material, whose potential toxicity towards eukaryotic cells has been addressed by multiple studies. TiO₂ NPs are considered toxic due to their production of reactive oxygen species (ROS), which can, among others, lead to cellular damage, inflammatory responses, and differences in gene expression. TiO₂ NPs exhibited toxicity in multiple organs in animals, generating potential health risks also in humans, such as developing tumors or progress of preexisting cancer processes. On the other hand, the capability of TiO₂ NPs to induce cell death has found application in photodynamic therapy of cancers. In aquatic environments, much has been done in understanding the impact of TiO₂ on bivalves, in which an effect on hemocytes, among others, is reported. Adversities are also reported from other aquatic organisms, including primary producers. These are affected also on land and though some potential benefit might exist when it comes to agricultural plants, TiO₂ can also lead to cellular damage and should be considered when it comes to transfer along the food chain towards human consumers. In general, much work still needs to be done to unravel the delicate balance between beneficial and detrimental effects of TiO₂ NPs on eukaryotic cells.

Multi-octave metasurface-based refractory superabsorber enhanced by a tapered unit-cell structure

An ultra-broadband metasurface-based perfect absorber is proposed based on a periodic array of truncated cone-shaped \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\text {TiO}_2$$\end{document}TiO2 surrounded by TiN/\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\text {TiO}_2$$\end{document}TiO2 conical rings. Due to the refractory materials involved in the metasurface, the given structure can keep its structural stability at high temperatures. The proposed structure can achieve a broadband spectrum of 4.3 µm at normal incidence spanning in the range of 0.2–4.5 µm with the absorption higher than \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$90\%$$\end{document}90% and the average absorption around \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$94.71\%$$\end{document}94.71%. The absorption can be tuned through the angle of the cone. By optimizing geometrical parameters, a super absorption is triggered in the range of 0.2–3.25 µm with the absorption higher than 97.40\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\%$$\end{document}% and substantially average absorption over 99\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\%$$\end{document}%. In this regard, the proposed structure can gather more than \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$99\%$$\end{document}99% of the full spectrum of solar radiation. Furthermore, the absorption of the designed structure is almost insensitive to the launching angle up to \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$50^\circ $$\end{document}50∘ for TE polarization, while it has a weak dependence on the incident angle for TM polarization. The proposed structure can be a promising candidate for thermal energy harvesting and solar absorption applications.

Effects of Selected Metal Nanoparticles (Ag, ZnO, TiO2) on the Structure and Function of Reproductive Organs

Various studies have shown that the reproductive organs are highly sensitive to toxic elements found in the environment. Due to technological progress, the use of nanoparticles has become more common nowadays. Nanoparticles are used for drug delivery because their dimensions allow them to circulate throughout the body and enter directly into the cell. Antimicrobial properties are increasingly used in the manufacture of medical devices, textiles, food packaging, cosmetics, and other consumer products. Nanoparticles provide several benefits, but aspects related to their effects on living organisms and the environment are not well known. This review summarizes current in vivo, and in vitro animal studies focused on the evaluation of toxicity of selected metal nanoparticles (Ag, ZnO, TiO₂) on male and female reproductive health. It can be concluded that higher concentrations of metal nanoparticles in the male reproductive system can cause a decrease in spermatozoa motility, viability and disruption of membrane integrity. Histopathological changes of the testicular epithelium, infiltration of inflammatory cells in the epididymis, and prostatic hyperplasia have been observed. Nanoparticles in the female reproductive system caused their accumulation in the ovaries and uterus. Metal nanoparticles most likely induce polycystic ovary syndrome and follicular atresia, inflammation, apoptosis, and necrosis also occurred.

The solvent-free mechano-chemical grinding of a bifunctional P25-graphene oxide adsorbent-photocatalyst and its configuration as porous beads

Owing to their use in water-cleaning technology, titanium-dioxide-based nanomaterials have dominated the photocatalysis scene, with so-called Degussa (P25) being the most promising under UV light. However, this is not the case under visible light, where it is necessary to combine titanium dioxide with other photosensitising nanomaterials. Unfortunately, most of the strategies aimed in this direction are chemically non-facile, energy-intensive, economically expensive, and not suitable for large-scale production. We herein describe a straightforward solvent-free approach for accessing visible-light-activated titanium-dioxide-based photocatalysts via the mechanochemical grinding of Degussa P25 with a second solid partner. Upon comparing several solid-material benchmarks, P25-graphene oxide is the best combination. The resulting material showed efficient performance for the adsorption and photodegradation of different dye pollutants, namely methylene blue, malachite green, Congo red, and methyl orange. The recorded performance was nearly comparable to that reached using sol-gel materials, with the ultimate advantage of being more sustainable and industrially scalable. The recyclability can be improved through a porous-bead configuration using biomass waste chitosan hydrogel, an approach that can further fulfill the requirement for more sustainable photocatalyst designs.

A Light(er) Approach for the Selective Hydrogenation of 5-Hydroxymethylfurfural to 2,5-Bis(hydroxymethyl)furan without External H2

The selective conversion of 5-hydroxymethyfurfural (HMF), a biomass-derived platform molecule, to value added chemicals can ease the burden on petroleum-based fine chemical synthesis. The active contribution of renewable energy sources along with low cost, environmental friendliness, and a simple reaction system must be adopted for better sustainability. In this context, photocatalytic selective hydrogenation of HMF to 2,5-bis(hydroxymethyl)furan (BHMF) was achieved over P25 titania nanoparticles without chemical squander. Simultaneously the photo-oxidation of p-methoxybenzyl alcohol (MeOBA) to p-methoxybenzaldehyde (MeOBaL), similar to biomass-derived vanillin, was carried out, abolishing the need of additional redox reagents. This system put forward the competent employment of photogenerated excitons for the valorization of lignocellulosic biomass to fine chemicals, which is an urgent requirement for sustainable chemical synthesis.

Versatile Synthesis of Mesoporous Crystalline TiO2 Materials by Monomicelle Assembly

Mesoscale TiO₂ structures have realized many technological applications-ranging from catalysis and biomedicine to energy storage and conversion-because of their large mesoporosities offering desirable accessibility and mass transport. Tailoring mesoporous TiO₂ structures with novel mesoscopic and microscopic configurations is envisaged to offer ample opportunities for further applications. In this Review, we explain how to synthesize novel mesoporous TiO₂ materials and present recent examples. An emphasis is placed on a "monomicelle assembly" strategy as an emerging and powerful approach to direct the formation of mesostructured TiO₂ with precise control over its structural orientations and architectures. Furthermore, typical examples of mesoporous TiO₂ for applications in batteries and photocatalysis are highlighted. The Review ends with an outlook towards the synthesis of mesoporous TiO₂ with tailored architectures by self-assembly, which could pave the way for developing advanced energy conversion and storage devices.

Controllable Microemulsion Synthesis of Hybrid TiO2-SiO2 Hollow Spheres and Au-Doped Hollow Spheres with Enhanced Photocatalytic Activity

Hollow structures in TiO₂ materials can enhance the photocatalytic properties by reducing the diffusion length and improving the accessibility of active sites for the reactants. However, existing approaches for preparing hollow TiO₂ materials have two drawbacks that restrict their engineering applicability: first, a heavy reliance on templates to form a hollow structure, which makes the preparation laborious, complicated, and costly; second, difficult-to-achieve high crystallization while maintaining the small grain size in calcinated TiO₂, which is crucial for enhancing photocatalytic activity. Herein, a simple, effective method is proposed that not only enables the preparation of hybrid TiO₂-SiO₂ hollow spheres without the template fabrication and removal process via microemulsion technology but also achieves both high crystallization and a small grain size in calcinated TiO₂ at once through the calcination of amorphous TiO₂ with organosilane at a high temperature of 850 °C. The prepared TiO₂-SiO₂ hollow spheres with tunable sizes demonstrate high photocatalytic activity with a maximum k value of 133.74 × 10^-3 min^-1, which is superior to commercial photocatalyst P25 (k = 114.97 × 10^-3 min^-1). In addition, Au can be doped in the hybrid TiO₂-SiO₂ shell to gain Au-doped hollow spheres that show a high k value of up to 694.14 × 10^-3 min^-1, which is 6 times larger than that of P25 and much better than that reported in the literature. This study not only provides an effective approach to stabilize and tune the grain growth of the TiO₂ photocatalyst during calcination but also enables the simple preparation of hollow TiO₂-based materials with controllable hollow nanostructures.

A Review of Titanium Dioxide (TiO2)-Based Photocatalyst for Oilfield-Produced Water Treatment

Oilfield produced water (OPW) has become a primary environmental concern due to the high concentration of dissolved organic pollutants that lead to bioaccumulation with high toxicity, resistance to biodegradation, carcinogenicity, and the inhibition of reproduction, endocrine, and non-endocrine systems in aquatic biota. Photodegradation using photocatalysts has been considered as a promising technology to sustainably resolve OPW pollutants due to its benefits, including not requiring additional chemicals and producing a harmless compound as the result of pollutant photodegradation. Currently, titanium dioxide (TiO₂) has gained great attention as a promising photocatalyst due to its beneficial properties among the other photocatalysts, such as excellent optical and electronic properties, high chemical stability, low cost, non-toxicity, and eco-friendliness. However, the photoactivity of TiO₂ is still inhibited because it has a wide band gap and a low quantum field. Hence, the modification approaches for TiO₂ can improve its properties in terms of the photocatalytic ability, which would likely boost the charge carrier transfer, prevent the recombination of electrons and holes, and enhance the visible light response. In this review, we provide an overview of several routes for modifying TiO₂. The as-improved photocatalytic performance of the modified TiO₂ with regard to OPW treatment is reviewed. The stability of modified TiO₂ was also studied. The future perspective and challenges in developing the modification of TiO₂-based photocatalysts are explained.

Titanium dioxide based nanocomposites - Current trends and emerging strategies for the photocatalytic degradation of ruinous environmental pollutants

Many ruinous pollutants are omnipresent in the environment and among them; pesticides are xenobiotic and pose to be a bio-recalcitrance. Their detrimental ecological and environmental impacts attract attention of environmental excerpts and the surge of stringent regulations have endows the need of a technically feasible treatment. This critical review emphasizes about the occurrence, abundance and fate of structurally distinct pesticides in different environment. The practiced remedial strategies and in particular, the advanced oxidation processes (AOPs) those utilize the photo-catalytic properties of nano-composites for the degradation of pollutants are critically discussed. Photo-catalytic degradation utilizes many composite materials at nano-scale level, wherein synthesis of nano-composites with appropriate precursors and other adjoining functional moieties are of prime importance. Therefore, suitable starter materials along with the reaction conditions are prerequisite for effectively tailoring the nano-composites. The aforementioned aspects and their customized applications are critically discussed. The associated challenges, opportunities and process economics of degradation using photo-catalytic AOP techniques are highlighted and in addition, the review tries to explain how best the photo-degradation can be a stand-alone tool with a societal importance. Conclusively, the future prospects for undertaking new researches in photo-catalytic breakdown of pollutants that can be judiciously sustainable.

Metallic Copper-Containing Composite Photocatalysts: Fundamental, Materials Design, and Photoredox Applications

Semiconductor photocatalysis has long been regarded as a potential solution to tackle the energy and environmental challenges since the first discovery of water splitting by TiO₂ almost 50 years ago. The past few years have seen a tremendous flurry of research interest in the modification of semiconductors because of their shortcomings in the aspects of solar harvesting, electron-hole pairs separation, and utilization of photogenerated carriers. Among the various strategies, the introduction of metallic copper into the photocatalysis system can not only enhance the absorption of sunlight and the separation efficiency of photogenerated electrons and holes, but also increase the adsorption ability of substrate and the number of active sites, so as to realize the high solar to chemical energy conversion efficiency. This review focuses on the rational design of copper-based composites and their applications in photoredox catalysis. First, the preparation methods of metallic copper-containing composites are discussed. Then, the applications of different types of copper-based composites in the photocatalytic removal of pollutants, splitting of water to hydrogen production, reduction of carbon dioxide, and conversion of organic matter are introduced. Finally, the opportunities and challenges in the design and synthesis of copper-based composites and their applications in the photocatalysis are prospected.

B, SHARMA PANKAJKUMAR, Rai PK. Graphene oxide supported highly porous TiO2 nano leaf-lets for ultrafast adsorption and photochemical decomposition of 2,4,6-trinitrotolune from water

Manufacturing of high energy materials for application in defense, aviation and space programs generate huge amount of explosive waste, which have adverse effects on natural resources like water and soil....

Mechanochemical synthesis of ternary heterojunctions TiO2(A)/TiO2(R)/ZnO and TiO2(A)/TiO2(R)/SnO2 for effective charge separation in semiconductor photocatalysis: A comparative study

TiO₂, ZnO, and SnO₂ metal oxides were synthesized by the sol-gel method and heterojunctions were fabricated by combining TiO₂ with either ZnO or SnO₂ in a 1:1 ratio using mechanochemical ball milling process. The ball milling process promotes phase transition of TiO₂ from anatase to rutile and yields ternary heterojunction of the type TiO₂(A)/TiO₂(R)/ZnO and TiO₂(A)/TiO₂(R)/SnO₂ (A-anatase and R-rutile). These ternary heterojunctions were characterized by various analytical techniques and its photocatalytic efficiency is evaluated using 4-Chloro Phenol as a model compound under UV and solar light. The enhanced catalytic activity of TiO₂(A)/TiO₂(R)/ZnO heterojunction is attributed to the formation of Ti³⁺-V_o defect states which leads to the efficient charge carrier separation. During the ball milling process severe crystal deformation takes place in TiO₂ and ZnO lattices by creating crystal lattice distortion which leads to the formation of defects due to valency mismatch between Ti⁴⁺ and Zn²⁺. A mechanistic pathway is proposed for the enhanced photocatalytic activity of the ternary heterojunctions.

The surface reconstruction induced enhancement of the oxygen evolution reaction on α-SnWO4 (010) based on a density functional theory study

It is possible to stabilize the O–W, O–Sn, R–OOSn and ST3 terminations of the α-SnWO4(010) surface. The O–Sn termination exhibits a low overpotential value of 0.51 V, showing remarkable oxygen evolution reaction (OER) performance.

Semiconductor photocatalysts and mechanisms of carbon dioxide reduction and nitrogen fixation under UV and visible light

The review summarizes the current knowledge about heterogeneous semiconductor photocatalysts that are active towards photocatalytic reduction of carbon dioxide and molecular nitrogen under visible and near-UV light. The main classes of these photocatalysts and characteristic features of their application in the target processes are considered. Primary attention is given to photocatalysts based on titanium dioxide, which have high activity and stability in the carbon dioxide reduction. For the first time, the photofixation of nitrogen under irradiation in the presence of various semiconductor materials is considered in detail.

The bibliography includes 264 references.

Metallaphotoredox: The Merger of Photoredox and Transition Metal Catalysis

The merger of photoredox catalysis with transition metal catalysis, termed metallaphotoredox catalysis, has become a mainstay in synthetic methodology over the past decade. Metallaphotoredox catalysis has combined the unparalleled capacity of transition metal catalysis for bond formation with the broad utility of photoinduced electron- and energy-transfer processes. Photocatalytic substrate activation has allowed the engagement of simple starting materials in metal-mediated bond-forming processes. Moreover, electron or energy transfer directly with key organometallic intermediates has provided novel activation modes entirely complementary to traditional catalytic platforms. This Review details and contextualizes the advancements in molecule construction brought forth by metallaphotocatalysis.

Electrospun Poly(methyl methacrylate)/TiO2 Composites for Photocatalytic Water Treatment

Electrospinning was successfully used for the one-step fabrication of poly(methyl methacrylate) (PMMA) fibers loaded with an inorganic photocatalyst—titanium oxide (TiO₂). By tuning the PMMA/TiO₂ ratio and the electrospinning conditions (applied voltage, needle tip-to-collector distance, and flow rates), PMMA/TiO₂ composites with selected organic/inorganic ratios, tailored designs, and targeted properties were obtained. The morphology of the electrospun composites was affected by the amount of TiO₂ incorporated into the PMMA fibers. In addition, the inorganic photocatalyst had an impact on the wettability, thermal stability, and optical properties of the electrospun composites. In particular, the surface wettability of the composites was strongly influenced by UV light irradiation and from hydrophobic became superhydrophilic. Moreover, PMMA/TiO₂ composites had enhanced tensile strength in comparison with those of bare PMMA mats. The electrospun PMMA/TiO₂ composites showed excellent photocatalytic efficiency against the model organic pollutant—methylene blue—which is very promising for the future development of membranes that are highly efficacious for photocatalytic water treatment.

Uplifting the charge carrier separation and migration in Co-doped CuBi2O4/TiO2 p-n heterojunction photocathode for enhanced photoelectrocatalytic water splitting

Here, cobalt-doped copper bismuth oxide (Co-CuBi₂O₄) was synthesized via a facile hydrothermal method for photoelectrocatalytic (PEC) hydrogen production. The results disclosed that the 5% Co-doped CuBi₂O₄ has better PEC activity which is ∼3 fold higher than pristine CuBi₂O₄. The doping of cobalt in CuBi₂O₄ improves the interfacial charge transfer at an electrode/electrolyte interface and reduces the recombination rate of photogenerated electron-hole pairs. This higher performed 5% Co-doped CuBi₂O₄ photocathode further modified with TiO₂-P25 to form a Co-CuBi₂O₄/TiO₂ p-n heterojunction. This Co-CuBi₂O₄/TiO₂ photocathode displayed a photocurrent density of 330 μA cm^-2 at +0.5 V vs. RHE which was ∼2 fold higher than Co-CuBi₂O₄. Because this p-n junction affords inner electric field in the space charge region that helps for further minimization of electron-hole recombination, which facilitate efficient charge separation and transport thereby enhance the PEC water reduction.

Mesoporous Solid and Yolk-Shell Titania Microspheres as Touchless Colorimetric Sensors with High Responsivity and Ultrashort Response Times

Touchless user interfaces offer an attractive pathway toward hygienic, remote, and interactive control over devices. Exploiting the humidity generated from fingers or human speech is a viable avenue for realizing such technology. Herein, titania microspheres including solid and yolk-shell structures with varying microstructural characteristics were demonstrated as high-performance, ultrafast, and stable optical humidity sensors aimed for touchless control. When water molecules enter the microporous network of the microspheres, the effective refractive index of the microsphere increases, causing a detectable change in the light scattering behavior. The microstructural properties of the microspheres, namely, the pore characteristics, crystallinity, and particle size, were examined in relation to the humidity-sensing performance, establishing optimum structural conditions for realizing humidity-responsive wavelength shifts above 100 nm, near full-scale relative humidity (RH) responsivity, ultrashort response times below 30 ms, and prolonged lifetimes. These optimized microspheres were used to demonstrate a colorimetric touchless sensor that responds to humidity from a finger and a microcontroller-based detector that translates the moisture pattern from human speech to electrical signals in real time. These results provide practical strategies for enabling humidity-based touchless user interfaces.

Titania-Clay Mineral Composites for Environmental Catalysis and Photocatalysis

The use of titania-based composite materials in the field of heterogeneous catalysis and photocatalysis has a long and rich history. Hybrid structures combining titania nanoparticles with clay minerals have been extensively investigated for nearly four decades. The attractiveness of clay minerals as components of functional materials stems primarily from their compositional versatility and the possibility of using silicate lamellae as prefabricated building blocks ready to be fitted into the desired nanoconstruction. This review focuses on the evolution over the years of synthetic strategies employed for the manufacturing of titania–clay mineral composites with particular attention to the role of the adopted preparative approach in shaping the physical and chemical characteristics of the materials and enabling, ultimately, tuning of their catalytic and/or photocatalytic performance.

Advanced Photocatalysts Based on Conducting Polymer/Metal Oxide Composites for Environmental Applications

Photocatalysts provide a sustainable method of treating organic pollutants in wastewater and converting greenhouse gases. Many studies have been published on this topic in recent years, which signifies the great interest and attention that this topic inspires in the community, as well as in scientists. Composite photocatalysts based on conducting polymers and metal oxides have emerged as novel and promising photoactive materials. It has been demonstrated that conducting polymers can substantially improve the photocatalytic efficiency of metal oxides owing to their superior photocatalytic activities, high conductivities, and unique electrochemical and optical properties. Consequently, conducting polymer/metal oxide composites exhibit a high photoresponse and possess a higher surface area allowing for visible light absorption, low recombination of charge carriers, and high photocatalytic performance. Herein, we provide an overview of recent advances in the development of conducting polymer/metal oxide composite photocatalysts for organic pollutant degradation and CO2 conversion through photocatalytic processes.

Synergic fabrication of succimer coated titanium dioxide nanomaterials delivery for in vitro proliferation and in vivo examination on human aortic endothelial cells

The probable nanotoxicity to human health and the environment is a significant challenge for the sustainable application of nanomaterials in medicine. The cytototoxical effect of succimer (meso-2,3-dimercaptosuccinic acid-DMSA) coated titanium dioxide (DMSA-TiO₂) with cultured human aortic endothelial cells (HAoECs) was assessed in this investigation. Our findings have shown that DMSA-TiO₂ can be accumulated in HAoECs and dispersed in a cytoplasm on the culture medium. DMSA-cytotoxicity TiO₂ effects were dose-responsive, and the concentrations were of little toxicity, and MTT stain testing showed that they had only 0.02 mg ml⁻¹. Meanwhile, the lactate dehydrogenase biomarker was not considerably more remarkable than the biomarker from untreated (control) cells (free DMSA-TiO₂). Though, also without any apparent signs of cell damage, the endocrine functions for prostacyclin I-2 and endothelin-1 and the urea transporter functions were modified. In addition, in vitro endothelial tube development has been shown that HAoECs could induce angiogenesis even with small amounts of DMSA-TiO₂ (0.01 and 0.02 mg ml⁻¹). Further, we have examined the in vivo toxicity and biochemical parameter by animal model. Furthermore, in vivo assessments designated that the resulting DMSA-TiO₂ presented synergistic activities of angiogenesis activity. Overall, these findings show the cytotoxicity of DMSA-TiO₂ and could induce adverse effects on normal endothelial cells.