Understanding TiO2 Photocatalysis: Mechanisms and Materials

Rational Design of Mesoporous ZnFe2O4@g-C3N4 Heterojunctions for Environmental Remediation and Hydrogen Evolution

Mesoporous catalysts with a high specific surface area, accessible pore structures, and appropriate band edges are desirable for optimal charge transfer across the interfaces, suppress electron-hole recombination, and promote redox reactions at the active sites. The present study demonstrates the rational design of mesoporous ZnFe2O4@g-C3N4 magnetic nanocomposites (MNCs) with different pore sizes and pore volumes following a combination of facile thermal itching and thermal impregnation methods. The MNCs preserve the structural, morphological, and physical attributes of their counterparts while ensuring their effectiveness and superior catalytic capabilities. The morphological analysis confirms the successful grafting and confinement of ZnFe2O4 nanoparticles with the polymeric g-C3N4 nanosheets to form heterojunctions with numerous interfaces. The MNCs possess uniformly distributed small mesopores (pore size <4 nm), ample active sites, and a high specific surface area of 62.50 m2/g. The mesoporous ZnFe2O4@g-C3N4 notably improve hydrogen evolution rate and methylene blue dye degradation. The optimal loading weight of ZnFe2O4 is 20 %, in which the MNCs display the highest hydrogen evolution rate of 1752 μmol g-1 h-1 and photo-Fenton dye degradation rate constants of 0.147 min-1, upon solar-light illumination. Furthermore, the photocatalysts demonstrate recyclability over five consecutive cycles, confirming their stability, while easy separation using a simple magnet underscores practical utility.

nano-TiO2 reduces bioavailability and biotransformation responses to crude oil WAF-associated PAHs in the European sea bass Dicentrachus labrax

The present study investigates the potential interaction between nano‑titanium dioxide (nano-TiO2) and the water accommodated fraction (WAF) of crude oil and associated chemicals on bioavailability and biotransformation responses in the European sea bass (Dicentrarchus labrax). An in vivo (48-h) waterborne exposure with nano-TiO2 (10 mgL-1), crude oil WAF (0.068 gL-1), alone and in combination was performed. Combined exposure significantly reduced levels of polycyclic aromatic hydrocarbons (PAH) in either seawater and fish fillets compared to WAF alone. A significant reduction in the expression of several biotransformation genes (cyp1a, gsta, erβ2, elmod2, abcb1 and abcc1) when nano-TiO2 was combined with WAF was observed in fish liver, compared to WAF alone. EROD and GST enzyme activities were also significantly reduced. Nano-TiO2 can reduce PAHs bioavailability in seawater and biological responses in European sea bass, suggesting a potential safe application of nano-TiO2 for the remediation of crude oil WAF in the marine environment.

Influence of Pd, Pt and Au nanoparticles in the photocatalytic performance of N-TiO2 support under visible light

In this article, we report the modification and photocatalytic evaluation of commercial TiO2-P25 under visible light for methyl orange (MO) dye degradation under visible light. The activity of materials doped with N, Pd, Pt and Au on to the TiO2-P25 was evaluated, with optimal photocatalytic performance achieved using Au nanoparticles doped on an N-functionalized titania surface. X-ray diffraction (XRD), physical nitrogen adsorption/desorption isotherm curves, transmission electron microscopy (TEM), diffuse reflectance spectroscopy, scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) were used to study the structural and textural properties of the samples. The chemical species present in the bulk and surface of the catalysts were identified using X-ray photoelectron spectroscopy (XPS) and microwave plasma-atomic emission spectroscopy. The results show that Au/N-TiO2 photocatalyst presents a remarkable enhanced activity for MO dye degradation, under visible light illumination, reaching 100% after 4 h. The enhanced photocatalytic activity using this composite is attributable to the well-dispersed and small size of Au nanoparticles, large surface area, reduction of band-gap energy and the interaction between nitrogen and Au which promoted a synergistic effect. This article is part of the discussion meeting issue 'Green carbon for the chemical industry of the future'.

Pr doping promotes the formation of Pt single atoms by regulating metal-support interaction for remarkable photocatalytic hydrogen production

Since the metal-support interaction (MSI) has a great influence on the structure and properties of single atom catalysts (SACs), the activity and stability of SACs can be effectively regulated by adjusting the structure of the matrix. Herein, the morphology of surface supported Pt species can be controlled by doping to adjust the properties of TiO2 support. Specifically, under the same conditions, the Pt species on the Pr doped TiO2 surface are Pt SAs (PtSA/TiO2(Pr)), while on the pure TiO2 surface are particles (PtNP/TiO2). Experimental and theoretical studies demonstrate that Pr doping weakens the interaction of Ti-O bond, stabilizes the O-Pt unit site and Pt SAs. Impressively, PtSA/TiO2(Pr) shows superior photocatalytic hydrogen production performance (196.43 mmol g-1 h-1), far exceeding PtNP/TiO2 (91.96 mmol g-1 h-1). Additionally, Pr dopant modulates the electronic interaction between TiO2 support and Pt SAs, thus the adsorption/desorption behavior of H intermediates (H*) is balanced. Besides, the electron delocalization of O adjacent to Pt SAs can be adjusted by Pr doping, prompting the establishment of efficient Pt-O electron transfer channels and further enhances the utilization of photogenerated carriers. This study presents a promising strategy to prepare SACs with high activity for photocatalyst hydrogen production.

Application of catalytic technology based on the piezoelectric effect in wastewater purification

The demands of human life and industrial activities result in a significant influx of toxic contaminants into aquatic ecosystems. In particular, organic pollutants such as antibiotics and dye molecules, bacteria, and heavy metal ions are represented, posing a severe risk to the health and continued existence of living organisms. The method of removing pollutants from water bodies by utilizing the principle of the piezoelectric effect in combination with chemical catalytic processes is superior to other wastewater purification technologies because it can collect water energy, mechanical energy, etc. to achieve cleanliness and high removal efficiency. Herein, we briefly introduced the piezoelectric mechanisms and then reviewed the latest advances in the design and synthesis of piezoelectric materials, followed by a summary of applications based on the principle of piezoelectric effect to degrade pollutants in water for wastewater purification. Moreover, water purification technologies incorporating the piezoelectric effect, including piezoelectric effect-assisted membrane filtration, activation of persulfate, and battery electrocatalysis are elaborated. Finally, future challenges and research directions for the piezoelectric effect are proposed.

Revolutionizing microorganism inactivation: Magnetic nanomaterials in sustainable photocatalytic disinfection

The rapid emergence of antibiotic-resistant microorganisms and the demand for sustainable water purification methods have spurred research into advanced disinfection, with photocatalysis as a promising approach. This study explores magnetic nanomaterials as catalysts in photocatalytic processes for microorganism inactivation. Magnetic nanoparticles and composites, due to their unique properties, are promising for enhancing photocatalytic disinfection. Their inherent magnetic traits enable easy separation and recyclability, reducing operational costs and environmental impact. These materials also act as efficient electron transfer mediators, enhancing overall photocatalytic efficiency. The review covers the synthesis and characterization of magnetic nanomaterials for photocatalytic applications, focusing on their structural, magnetic, and surface properties. Photocatalytic mechanisms, including reactive oxygen species (ROS) generation vital for microorganism inactivation, are discussed. The study examines combining common photocatalysts like TiO2, ZnO, and semiconductors with magnetic nanomaterials, highlighting synergistic effects. Recent advances and challenges, such as optimal nanomaterials selection and scalability for large-scale applications, are addressed. Case studies and experimental setups for microorganism inactivation underscore the potential of magnetic nanomaterials in water treatment, air purification, and medical disinfection. Finally, further research directions and research highlights the substantial potential of magnetic nanomaterials as catalysts in photocatalytic processes, offering an efficient and sustainable solution for microorganism inactivation and contributing valuable insights to environmental and public health advancement.

Electrochemically Determined and Structurally Justified Thermochemistry of H atom Transfer on Ti-Oxo Nodes of the Colloidal Metal-Organic Framework Ti-MIL-125

Titanium dioxide (TiO2) has long been employed as a (photo)electrode for reactions relevant to energy storage and renewable energy synthesis. Proton-coupled electron transfer (PCET) reactions with equimolar amounts of protons and electrons at the TiO2 surface or within the bulk structure lie at the center of these reactions. Because a proton and an electron are thermochemically equivalent to an H atom, these reactions are essentially H atom transfer reactions. Thermodynamics of H atom transfer has a complex dependence on the synthetic protocol and chemical history of the electrode, the reaction medium, and many others; together, these complications preclude the understanding of the H atom transfer thermochemistry with atomic-level structural knowledge. Herein, we report our success in employing open-circuit potential (EOCP) measurements to quantitatively determine the H atom transfer thermochemistry at structurally well-defined Ti-oxo clusters within a colloidally stabilized metal-organic framework (MOF), Ti-MIL-125. The free energy to transfer H atom, Ti3+O-H bond dissociation free energy (BDFE), was measured to be 68(2) kcal mol-1. To the best of our understanding, this is the first report on using EOCP measurements to quantify thermochemistry on any MOFs. The proton topology, the structural change upon the redox reaction, and BDFE values were further quantitatively corroborated using computational simulations. Furthermore, comparisons of the EOCP-derived BDFEs of Ti-MIL-125 to similar parameters in the literature suggest that EOCP should be the preferred method for quantitatively accurate BDFE calculations. The reported success in employing EOCP for nanosized Ti-MIL-125 should lay the ground for thermochemical measurements of other colloidal systems, which are otherwise challenging. Implications of these measurements on Ti-MIL-125 as an H atom acceptor in chemical reactions and comparisons with other MOFs/metal oxides are discussed.

Rationally designed hierarchical hollow CuS/CdIn2S4 heterostructure nanoboxes for boosted photoreduction of CO2

A novel double-shelled CuS/CdIn2S4 photocatalyst was rationally designed using CdIn2S4 sheets in situ grown upon the exterior of hollow CuS nanocubes. The unique hierarchical hollow structure of CuS/CdIn2S4 provides numerous active sites and reduces carrier diffusion length. Surface sulfur vacancies mitigate the detachment of the intermediate, which is favorable for a multi-electron reaction path such as that in the production of CH4. Meanwhile, a suitable band-structure alignment between p-type CuS and n-type CdIn2S4 leads to the formation of a type-II heterostructure, thus resulting in effective light-harvesting and spatial separation of electron-hole pairs for CO2 photoreduction. The CuS/CdIn2S4 heterostructure exhibits significantly enhanced performance with a boosted CO yield of 40.73 μmol g-1 h-1 as well as a noticeably improved CH4 selectivity (36.5%, 23.41 μmol g-1 h-1). This work introduces innovative concepts in designing photocatalytic systems with unique morphologies and rational band structures, promising advancements in CO2 photoreduction at reduced costs.

Electrospun Nanofiber Dopped with TiO2 and Carbon Quantum Dots for the Photocatalytic Degradation of Antibiotics

Novel photocatalysts were synthesized through the association of carbon quantum dots (CQDs) with commercial (P25) titanium dioxide (TiO2) by sonication. The resulting TiO2/CQDs composite was then incorporated into the polyamide 66 (PA66) biopolymer nanofibers using the electrospinning technique, considering a composite nanoparticles-to-polymer ratio of 1:2 in the electrospinning precursor solution. The produced nanofibers presented suitable morphology and were tested for the photocatalytic degradation under simulated solar radiation of 10 mg L-1 of amoxicillin (AMX) and sulfadiazine (SDZ), in phosphate buffer solution (pH 8.06) and river water, using 1.5 g L-1 of photocatalyst. The presence of the photocatalyst increased the removal of AMX in phosphate buffer solution by 30 times, reducing the AMX degradation half-life time from 62 ± 1 h (without catalyst) to 1.98 ± 0.06 h. Moreover, SDZ degradation half-life time in phosphate buffer solution was reduced from 5.4 ± 0.1 h (without catalyst) to 1.87 ± 0.05 h in the presence of the photocatalyst. Furthermore, the PA66/TiO2/CQDs were also efficient in river water samples and maintained their performance in at least three cycles of SDZ photodegradation in river water. The presented results evidence that the produced photocatalyst can be a promising and sustainable solution for antibiotics' efficient removal from water.

Mechanistic Insights into Toxicity of Titanium Dioxide Nanoparticles at the Micro- and Macro-levels

Titanium oxide nanoparticles (TiO2 NPs) have been regarded as a legacy nanomaterial due to their widespread usage across multiple fields. The TiO2 NPs have been and are still extensively used as a food and cosmetic additive and in wastewater and sewage treatment, paints, and industrial catalysis as ultrafine TiO2. Recent developments in nanotechnology have catapulted it into a potent antibacterial and anticancer agent due to its excellent photocatalytic potential that generates substantial amounts of highly reactive oxygen radicals. The method of production, surface modifications, and especially size impact its toxicity in biological systems. The anatase form of TiO2 (<30 nm) has been found to exert better and more potent cytotoxicity in bacteria as well as cancer cells than other forms. However, owing to the very small size, anatase particles are able to penetrate deep tissue easily; hence, they have also been implicated in inflammatory reactions and even as a potent oncogenic substance. Additionally, TiO2 NPs have been investigated to assess their toxicity to large-scale ecosystems owing to their excellent reactive oxygen species (ROS)-generating potential compounded with widespread usage over decades. This review discusses in detail the mechanisms by which TiO2 NPs induce toxic effects on microorganisms, including bacteria and fungi, as well as in cancer cells. It also attempts to shed light on how and why it is so prevalent in our lives and by what mechanisms it could potentially affect the environment on a larger scale.

Surface properties of carbon nitride materials used in photocatalytic systems for energy and environmental applications

The use of photocatalytic systems involving semiconductor materials for environmental and energy applications, such as water remediation and clean energy production, is highly significant. In line with this, a family of carbon-based polymeric materials known as carbon nitride (CNx) has emerged as a promising candidate for this purpose. Despite CNx's remarkable characteristics of performance, stability, and visible light responsiveness, its chemical inertness and poor surface properties hinder interfacial interactions, which are key to effective catalysis. This highlight reviews the literature focusing on the surface chemistry of CNx, especially its structural formation pathway, reactivity, and solvent interactions. It also explores recent advancements in the use of modified CNx for hydrogen production and arsenic remediation, offering recommendations for future material design improvements.

Tutorial on Describing, Classifying, and Visualizing Common Crystal Structures in Nanoscale Materials Systems

Crystal structures underpin many aspects of nanoscience and technology, from the arrangements of atoms in nanoscale materials to the ways in which nanoscale materials form and grow to the structures formed when nanoscale materials interact with each other and assemble. The impacts of crystal structures and their relationships to one another in nanoscale materials systems are vast. This Tutorial provides nanoscience researchers with highlights of many crystal structures that are commonly observed in nanoscale materials systems, as well as an overview of the tools and concepts that help to derive, describe, visualize, and rationalize key structural features. The scope of materials focuses on the elements and their compounds that are most frequently encountered as nanoscale materials, including both close-packed and nonclose-packed structures. Examples include three-dimensionally and two-dimensionally bonded compounds related to the rocksalt, nickel arsenide, fluorite, zincblende, wurtzite, cesium chloride, and perovskite structures, as well as layered perovskites, intergrowth compounds, MXenes, transition metal dichalcogenides, and other layered materials. Ordered versus disordered structures, high entropy materials, and instructive examples of more complex structures, including copper sulfides, are also discussed to demonstrate how structural visualization tools can be applied. The overall emphasis of this Tutorial is on the ways in which complex structures are derived from simpler building blocks, as well as the similarities and interrelationships among certain classes of structures that, at first glance, may be interpreted as being very different. Identifying and appreciating these structural relationships is useful to nanoscience researchers, as it allows them to deconstruct complex structures into simpler components, which is important for designing, understanding, and using nanoscale materials.

A compendium of all-in-one solar-driven water splitting using ZnIn2S4-based photocatalysts: guiding the path from the past to the limitless future

Photocatalytic water splitting represents a leading approach to harness the abundant solar energy, producing hydrogen as a clean and sustainable energy carrier. Zinc indium sulfide (ZIS) emerges as one of the most captivating candidates attributed to its unique physicochemical and photophysical properties, attracting much interest and holding significant promise in this domain. To develop a highly efficient ZIS-based photocatalytic system for green energy production, it is paramount to comprehensively understand the strengths and limitations of ZIS, particularly within the framework of solar-driven water splitting. This review elucidates the three sequential steps that govern the overall efficiency of ZIS with a sharp focus on the mechanisms and inherent drawbacks associated with each phase, including commonly overlooked aspects such as the jeopardising photocorrosion issue, the neglected oxidative counter surface reaction kinetics in overall water splitting, the sluggish photocarrier dynamics and the undesired side redox reactions. Multifarious material design strategies are discussed to specifically mitigate the formidable limitations and bottleneck issues. This review concludes with the current state of ZIS-based photocatalytic water splitting systems, followed by personal perspectives aimed at elevating the field to practical consideration for future endeavours towards sustainable hydrogen production through solar-driven water splitting.

Natural AIEgens as Ultraviolet Sunscreens and Photosynergists for Solar Fuel Production

Bio-nano hybrids (BNH), combining semiconductors and microorganisms, have shown great promise for effective solar-to-fuel energy conversion. However, the high-energy ultraviolet (UV) photons in the solar spectrum can cause severe photocorrosion of semiconductors and irreversible photodamage to microorganisms within BNH. Here, we developed an encapsulation strategy using natural luminogens with aggregation-induced emission characteristics (AIEgens) to construct a protective layer for BNH, effectively shielding them against high-energy UV photons. We incorporated natural berberine (BBR) into the BNH composed of Methanosarcina barkeri and polymeric carbon nitrides (CNx). The self-assembled BNH-BBR system displayed a 2.75-fold higher CH4 yield than BNH under simulated solar irradiation. Mechanism analysis revealed that BBR acted as a UV sunscreen for BNH by converting high-energy short wavelengths into low-energy long wavelengths, thereby reducing the accumulation of reactive oxygen species and alleviating the photocorrosion of CNx. Furthermore, BBR functioned as a photosynergist for BNH by regulating photoelectron production and utilization, enhancing the intracellular energy formation in M. barkeri for growth and metabolism. This work provides important insights into the effective and scalable conversion of CO2 into valuable biofuels with BNH under light illumination containing high-energy photons.

Design of novel Z-scheme g-C3N4/TiO2/CuCo2O4 heterojunctions for efficient visible light-driven photocatalyic degradation of rhodamine B

One of the most important environmental challenges that needs to be resolved is the industrial discharge of synthetic dyes. Graphitic carbon nitride (g-C3N4), Titanium dioxide (TiO2) and flower-like copper oxide (CuO)/copper cobaltite (CuCo2O4) nanocomposites were synthesized in order to synthesis an effective visible light driven photocatalyst that could degrade Rhodamin B (Rh.B) dye under simulated solar light irradiation. The SEM and TEM results verifies that the flower-like CuO/CuCo2O4 (CCO) structure and g-C3N4/TiO2 (g-CN/TO) generated a smart hybrid structure with superior g-CN distribution. According to the photocatalytic studies, g- C3N4/TiO2/CuO/CuCo2O4 (g-CN/TO/CCO) shows good photodegradation of Rh.B dye (99.9%) in minmal times (1 h) in CCO: g-CN/TO (2:1) ratio by Z-Scheme mechanism. The enhanced visible light absorption and effective electron-hole pair separation provided by the synergistic dispersion of CuO/CuCo2O4 and g-C3N4 can be attributed to the improved photocatalytic performances. These novel insights into g-CN/TO/CCO based photocatalysts are useful for treating industrial effluent.

Investigating the Effect of UV Irradiation and TiO2 Addition on Heavy Metal Adsorption by Inverse Vulcanized Sulfur Polymers

Organomercury contamination in wastewater is a longstanding global concern, prompting the establishment of the Mi-namata Convention in 2013, following the tragic Minamata Bay incident in Japan. Despite numerous proposed solutions, the development of an affordable and convenient adsorbent remains a challenge. Sulfur, being one of the most abundant elements globally, has shown promise in mercury adsorption in previous research. This study delves into the influence of light exposure on the process of mercury adsorption. Our findings reveal that exposure to UV-A wavelengths (315 nm-400 nm), in combination with the addition of titanium dioxide (TiO2), enhances the adsorption capacity of a sulfur-rich polymer. The maximum observed adsorption capacity reached 47 mg/g under these conditions. Notably, the presence of TiO2 and UV exposure did not significantly impact the adsorption of inorganic mercury and gold.

Oxidative stress-modifying effects of TiO2nanoparticles with varying content of Ti3+(Ti2+) ions

Nanoparticles (NPs) with reactive oxygen species (ROS)-regulating ability have recently attracted great attention as promising agents for nanomedicine. In the present study, we have analyzed the effects of TiO2defect structure related to the presence of stoichiometric (Ti4+) and non-stoichiometric (Ti3+and Ti2+) titanium ions in the crystal lattice and TiO2NPs aggregation ability on H2O2- and tert-butyl hydroperoxide (tBOOH)-induced ROS production in L929 cells. Synthesized TiO2-A, TiO2-B, and TiO2-C NPs with varying Ti3+(Ti2+) content were characterized by x-ray powder diffraction, transmission electron microscopy, small-angle x-ray scattering, x-ray photoelectron spectroscopy, and optical spectroscopy methods. Given the role of ROS-mediated toxicity for metal oxide NPs, L929 cell viability and changes in the intracellular ROS levels in H2O2- and tBOOH-treated L929 cells incubated with TiO2NPs have been evaluated. Our research shows that both the amount of non-stoichiometric Ti3+and Ti2+ions in the crystal lattice of TiO2NPs and NPs aggregative behavior affect their catalytic activity, in particular, H2O2decomposition and, consequently, the efficiency of aggravating H2O2- and tBOOH-induced oxidative damage to L929 cells. TiO2-A NPs reveal the strongest H2O2decomposition activity aligning with their less pronounced additional effects on H2O2-treated L929 cells due to the highest amount of Ti3+(Ti2+) ions. TiO2-C NPs with smaller amounts of Ti3+ions and a tendency to aggregate in water solutions show lower antioxidant activity and, consequently, some elevation of the level of ROS in H2O2/tBOOH-treated L929 cells. Our findings suggest that synthesized TiO2NPs capable of enhancing ROS generation at concentrations non-toxic for normal cells, which should be further investigated to assess their possible application in nanomedicine as ROS-regulating pharmaceutical agents.

N-doped titania nanoparticles containing Mo6 bromide and iodide clusters: Activity in photodegradation of rhodamine B and tetracycline

Contamination of water sources is a major environmental problem with far-reaching consequences for humanity. Organic substances are among the most widespread and persistent pollutants. Advanced oxidation processes, especially photocatalysis, have been considered as one of the most promising technologies for organic pollution control. In this study, hybrid photocatalysts based on N-doped TiO2, which exhibits activity in the visible region of the spectrum, and different content of octahedral Mo6 bromide and iodide cluster complexes were synthesized to achieve the highest efficiency of the formed S-scheme photocatalytic system under white light irradiation. According to the data obtained, the resulting materials are nanoparticles with a diameter of ∼10 nm exhibiting absorption up to ∼550 nm. Photocatalytic studies were performed using model organic molecules - the more colored rhodamine B (RhB) and the less colored antibiotic tetracycline (TET). The most active samples showed high efficiencies against both pollutants with keff ∼0.3-0.4 and 0.4-0.5 min-1, respectively, while the activity of iodide complexes was ∼1.3 times higher than that of bromide complexes. The stability of the catalysts is preserved for up to 5 cycles of TET photodegradation.

Black Titanium Oxide/Activated TaS2 Flakes Photoelectrode for Plasmon Assisted Hydrogen Evolution at Neutral pH at High Current Density

A heterojunction photo-electrode(s) consisting of porous black titanium oxide (bTiO2) and electrochemically self-activated TaS2 flakes is proposed and utilized for hydrogen evolution reaction (HER). The self-activated TaS2 flakes provide abundant catalytic sites for HER and the porous bTiO2, prepared by electrochemical anodization and subsequent reduction serves as an efficient light absorber, providing electrons for HER. Additionally, Au nanostructures are introduced between bTiO2 and TaS2 to facilitate the charge transfer and plasmon-triggering ability of the structure created. After structure optimization, high HER catalytic activity at acidic pH and excellent HER activity at neutral pH are achieved at high current densities. In particular, with the utilization of bTiO2@TaS2 photoelectrode (neutral electrolyte, sunlight illumination) current densities of 250 and 500 mA cm-2 are achieved at overpotentials of 433, and 689 mV, respectively, both exceeding the "benchmark" Pt. The addition of gold nanostructures further reduces the overpotential to 360 and 543 mV at 250 and 500 mA cm-2, respectively. The stability of the prepared electrodes is investigated and found to be satisfying within 24 h of performance at high current densities. The proposed system offers an excellent potential alternative to Pt for the development of green hydrogen production on an industrial scale.

Photoluminescence decay of mobile carriers influenced by imperfect quenching at particle surfaces with subdiffusive spread

We recently presented a quantitative model to explain the particle-size dependence of photoluminescence (PL) quantum yields and revealed that exciton quenching is not diffusion controlled, but limited by surface reactions. However, the exciton decay kinetics has not been analyzed yet using our theoretical model. Here, we study kinetic aspects of the model and show that it should be extended to take into account subdiffusion rather than normal diffusion to maintain consistency with the observed complex decay kinetics; we also show that the PL decay kinetics is nonexponential even when the PL quenching is limited by surface reactions under subdiffusion. Our theoretical analysis of the PL quantum yield and the PL decay kinetics provides a comprehensive picture of mobile charge carriers, immobile polarons, and self-trapped excitons.

Confined Cu Single Sites in ZSM-5 for Photocatalytic Hydroxylation of Benzene to Phenol

Zeolites with band-like charge transport properties have exhibited their potential activities in sensing, optics, and electronics. Herein, a precisely designed Cu@ZSM-5 catalyst is presented with an ultra-wide bandgap of 4.27 eV, showing excellent photocatalytic activity in hydroxylation of benzene with benzene conversion 27.9% and phenol selectivity 97.6%. The SXRD and Rietveld refinement results illustrate that Cu@ZSM-5 has an average of 0.8 Cu atoms per unit cell and the single Cu atoms located in the cross-section of the sinusoidal and straight channels. XANES and EXAFS further demonstrate that the Cu atoms have an oxidation state of +2, coordinated with three OMFI-framework atoms and one ─OH group. Detailed characterizations demonstrate that the Cu@ZSM-5 with tailored bandgap is able to enhance the photoinduced electron-hole separation and hence promote selective hydroxylation of benzene to phenol via the superoxide radical route. This work may open a new way for designing electrically conductive zeolite-supported photocatalysts.

Self-sensitized photodegradation and adsorption of aqueous malachite green dye using one-dimensional titanium oxide nanofilaments

Truly one-dimensional titanium oxide nanofilaments with a lepidocrocite structure (1DLs) were explored in the adsorption and photocatalytic degradation of aqueous malachite green (MG), a toxic polluting dye. Decolorization is monitored by ultraviolet-visible spectroscopy, and mineralization is confirmed by total organic carbon analysis. The 1DL/MG flocs are characterized by scanning electron microscopy and X-ray diffraction. 1DLs, a colloidal nanomaterial, exhibit flocculating behavior while demonstrating high affinity for MG, with a maximum uptake of >680 mg/g rapidly via ion exchange. Additionally, 1DLs decolorize MG under visible light only, unlike most available titania products, via a self-sensitization effect. MG is decolorized by 1DLs by >70% in 30 min under 1 sun exposure of visible light. Counterintuitively, dye adsorption increases as the normalized concentration by mass of 1DL decreases. Demonstrating high adsorption capacity and dye mineralization supports the use of 1DLs in water treatment and self-sensitization for photoelectrochemical devices, like solar cells.

Acoustic Shock Wave-Induced Rutile to Anatase Phase Transition of TiO2 Nanoparticles and Exploration of Their Unconventional Thermodynamic Structural Transition Path of Crystallization Behaviors

Titanium dioxide (TiO2) is one of the most well-known and long-standing polymorphic materials in the transition metal oxide group of materials. The transition from rutile to anatase is one of the long-standing fundamental questions among materials science researchers because seeking the nucleation site at the beginning of the phase transition is highly challenging. Until now, there have been no studies on the unconventional structural phase transition of TiO2 nanoparticles by acoustic shock waves. In the present study, this work provides the first evidence on the solid-state nanostructure of the rutile-to-anatase phase transition of TiO2 by acoustic shock waves whereby these phase transition results are evaluated by Raman spectroscopy, thermal calorimetry, X-ray photoelectron spectroscopy, and microscopic techniques. We propose a novel mechanism for the occurrence of the rutile-to-anatase phase transition based on thermophysical properties and shock wave-induced melting concepts. Under shocked conditions, the R-A phase transition occurs because of the anatase phase's lower interfacial energy (γL/A) and surface energy compared to rutile. We strongly believe that the present work can provide in-depth insight into understanding the crystallization concepts of the TiO2 NPs under extreme conditions, especially with regard to the rutile-to-anatase phase transition.

Ba2+-doping introduced piezoelectricity and efficient Ultrasound-Triggered bactericidal activity of brookite TiO2 nanorods

Exploring highly efficient ultrasound-triggered catalysts is pivotal for various areas. Herein, we presented that Ba2+ doped brookite TiO2 nanorod (TiO2: Ba) with polarization-induced charge separation is a candidate. The replacement of Ba2+ for Ti4+ not only induced significant lattice distortion to induce polarization but also created oxygen vacancy defects for facilitating the charge separation, leading to high-efficiency reactive oxygen species (ROS) evolution in the piezo-catalytic processes. Furthermore, the piezocatalytic ability to degrade dye wastewater demonstrates a rate constant of 0.172 min-1 and achieves a 100 % antibacterial rate at a low dose for eliminating E. coli. This study advances that doping can induce piezoelectricity and reveals that lattice distortion-induced polarization and vacancy defects engineering can improve ROS production, which might impact applications such as water disinfection and sonodynamic therapy.

Hierarchical Branched TiO2 Photo/Photoelectrocatalyst with Directed Charge Transfer for Efficient Hydrogen Production from Seawater

The directed electron transport channel design in semiconductors, which could promote charge utilization, is attractive but rarely reported. Hierarchical branched titanium dioxide (HB-TiO2), possessing a charge cascade transfer channel, was constructed by assembling titanium-defected TiO2 nanobranches on oxygen-defected TiO2 nanobelts. The interfacial Ti/O vacancies have been detected by X-ray photoelectron and electron paramagnetic resonance spectroscopies, and the vacancies act as the "bridge" of photogenerated carrier transport. This structure maintained high photoactivity in H2 production in different mass fractions of NaCl solutions. The photocurrent density of the HB-TiO2 photoanode in natural seawater is 3.9, 2.1, and 2.6 times that of oxygen-defected TiO2 nanobelts, titanium-defected TiO2 nanobranches, and their mixture, respectively. Besides, the charge transport mechanism from the inner lattice to the TiO2 surface is proposed.

Photocatalytic Edge Growth of Conductive Gold Lines On Microstructured TiO2-ITO Substrates

Titanium dioxide is well-known for its excellent photocatalytic properties. UV-controlled photodeposition of gold on TiO2 is achieved by photocatalytic reduction of precursor ions from a tetrachloroauric solution. During the growth process on the surface, clusters grow from nucleation centers and coalescence is observed for sufficiently long UV illumination times, resulting in gold structures with complex shapes. Here, we hypothesize and demonstrate that the growth process is altered by employing an ITO sublayer below the TiO2 layer. Photocatalytic gold growth experiments on a microstructured thin film stack of 6 nm ITO and 70 nm TiO2 lead to strongly localized gold growth along the edge of the patterned area. A conductive gold line with a height of 3.8 μm is achieved along the edge of the TiO2-coated region, while gold growth on the surface of TiO2 is effectively suppressed. For substrates coated only with ITO or TiO2, no edge growth is observed. Furthermore, for an 845 nm thick TiO2 layer, either with or without ITO sublayer, gold growth on the TiO2 surface is dominant. Thus, for the effective steering of electrons to the edge, both the ITO sublayer and a sufficiently thin TiO2 layer are necessary. This modified method of photocatalytic deposition─electrons photogeneration in a thin layer, collection in a dedicated conductive sublayer, and growth by reduction at a different position─opens opportunities for localized material deposition. We are in particular aiming at extending the toolbox of neuromorphic engineering by providing a technical implementation of stimulus-controlled dynamic formation of directional conductive interlinks.

2D TiO2 Nanosheets Decorated Via Sphere-Like BiVO4: A Promising Non-Toxic Material for Liquid Phase Photocatalysis and Bacterial Eradication

An in-depth investigation was conducted on a promising composite material (BiVO4/TiO2), focusing on its potential toxicity, photoinduced catalytic properties, as well as its antibiofilm and antimicrobial functionalities. The preparation process involved the synthesis of 2D TiO2 using the lyophilization method, which was subsequently functionalized with sphere-like BiVO4 through wet impregnation. Finally, we developed BiVO4/TiO2 S-scheme heterojunctions which can greatly promote the separation of electron-hole pairs to achieve high photocatalytic performance. The evaluation of concentration- and time-dependent viability inhibition was performed on human lung carcinoma epithelial A549 cells. This assessment included the estimation of glutathione levels and mitochondrial dehydrogenase activity. Significantly, the BiVO4/TiO2 composite demonstrated minimal toxicity towards A549 cells. Impressively, the BiVO4/TiO2 composite exhibited notable photocatalytic performance in the degradation of rhodamine B (k=0.135 min-1) and phenol (k=0.016 min-1). In terms of photoinduced antimicrobial performance, the composite effectively inactivated both gram-negative E. coli and gram-positive E. faecalis bacteria upon 60 minutes of UV-A light exposure, resulting in a significant log 6 (log 10 CFU/mL) reduction in bacterial count. In addition, a 49 % reduction of E. faecalis biofilm was observed. These promising results can be attributed to the unique 2D morphology of TiO2 modified by sphere-like BiVO4, leading to an increased generation of (intracellular) hydroxyl radicals, which plays a crucial role in the treatments of both organic pollutants and bacteria. This research has significant potential for various applications, particularly in addressing environmental contamination and microbial infections.

Photoelectrochemical Lithium Extraction from Waste Batteries

The amount of global hybrid-electric and all electric vehicle has increased dramatically in just five years and reached an all-time high of over 10 million units in 2022. A good deal of waste lithium (Li)-containing batteries from dead vehicles are invaluable unconventional resources with high usage of Li. However, the recycle of Li by green approaches is extremely inefficient and rare from waste batteries, giving rise to severe environmental pollutions and huge squandering of resources. Thus, in this mini review, we briefly summarized a green and promising route-photoelectrochemical (PEC) technology for extracting the Li from the waste lithium-containing batteries. This review first focuses on the critical factors of PEC performance, including light harvesting, charge-carrier dynamics, and surface chemical reactions. Subsequently, the conventional and PEC technologies applying in the area of Li recovery processes are analyzed and discussed in depth, and the potential challenges and future perspective for rational and healthy development of PEC Li extraction are provided positively.

High photocatalytic yield in the non-oxidative coupling of methane using a Pd-TiO2 nanomembrane gas flow-through reactor

The photocatalytic non-oxidative coupling of methane (NOCM) is a highly challenging and sustainable reaction to produce H2 and C2+ hydrocarbons under ambient conditions using sunlight. However, there is a lack of knowledge, particularly on how to achieve high photocatalytic yield in continuous-flow reactors. To address this, we have developed a novel flow-through photocatalytic reactor for NOCM as an alternative to the conventionally used batch reactors. Me/TiO2 photocatalysts, where Me = Au, Ag and Pd, are developed, but only those based on Pd are active. Interestingly, the preparation method significantly impacts performance, going from inactive samples (prepared by wet impregnation) to highly active samples (prepared by strong electrostatic adsorption - SEA). These photocatalysts are deposited on a nanomembrane, and the loading effect, which determines productivity, selectivity, and stability, is also analysed. Transient absorption spectroscopy (TAS) analysis reveals the involvement of holes and photoelectrons after charge separation on Pd/TiO2 (SEA) and their interaction with methane in ethane formation, reaching a production rate of about 1000 μmol g-1 h-1 and a selectivity of almost 95% after 5 hours of reaction. Stability tests involving 24 h of continuous irradiation are performed, showing changes in productivity and selectivity to ethane, ethylene and CO2. The effect of a mild oxidative treatment (80 °C) to extend the catalyst's lifetime is also reported.

WSe2-PPy-Based Type-II Heterostructure for Efficient Photocatalytic Removal of Nitrofurazone

The escalating concerns over water pollution and antimicrobial resistance have underscored the urgency of effective antibiotic degradation. Photocatalytic degradation offers a promising solution due to its efficiency and environmental friendliness. In this study, I synthesized a novel nanocomposite comprising WSe2 and polypyrrole (PPy) via a hydrothermal method coupled with polymerization for the degradation of nitrofurazone antibiotics. The WSe2/PPy nanocomposite demonstrated significantly higher photocatalytic degradation efficiency (94.50%) compared to pure WSe2 and PPy, with degradation efficiencies of 23.07% and 32.96%, respectively. The degradation was performed at different pH values, with acidic conditions proving the most suitable for nitrofurazone degradation. The photocatalytic degradation efficiencies at pH 2, 3, 5, 7, 9, and 11 were 98.5%, 98.3%, 85.4%, 78.02%, 61.4%, and 61%, respectively. The acidic conditions were found to be the most suitable for nitrofurazone degradation. The nanocomposite's improved efficiency was ascribed to its low recombination rate and quick charge transfer, as demonstrated by time-resolved photoluminescence (TRPL) and electrochemical impedance spectroscopy (EIS) tests, respectively. The Z-Scheme photocatalysis mechanism as proposed for the WSe2-PPy nanocomposite and supported by scavenger experiments. Moreover, the nanocomposite demonstrated excellent reusability, which enhanced its practical applicability.

Complexes Based on Zinc and Cadmium for Visible Light-Driven Hydrogen Production

Photocatalytic water decomposition using solar energy is one of the most effective hydrogen production technologies. The development of a structurally stable photocatalyst for hydrogen production without cocatalysts and photosensitizers remains a great challenge. In this paper, complex photocatalyst compounds 1 and 2 with different crystal structures were designed and obtained by connecting the 4'-(2,4-disulfophenyl)-4,2':6',4″-terpyridine organic ligands with Zn(Ac)2·2H2O and CdCO3. These products were used for photocatalytic hydrogen production separately, and the hydrogen production rates of compounds 1 and 2 were 0.66 mol·mol-1·h-1 and 0.12 mol·mol-1·h-1, respectively, without the addition of any cocatalysts and photosensitizers, and their charge separation and transfer processes were verified by PL, time-resolved PL, and photocurrent. Compound 1 was tested in 6 cycles over 18 h and showed high stability and reproducibility.

Electro-, photo-, and photoelectrochemical degradation of chloramphenicol on self-doping Ti nanotubes

In this work, the photo-, electro-, and photo-electro-oxidation of chloramphenicol was investigated. The photo-experiments were carried out with different irradiation sources (an ultraviolet and a simulated solar source) using self-doped titanium nanotubes (SDTNT), a very promising and innovative material that deserves further investigations in the degradation of different pollutants. The photo-electrooxidation (j = 15 mA cm-2) under simulated solar irradiation presented the best efficiency, with ca. 100% degradation and kinetic constant of k = 0.04427 min-1. The FTIR analysis demonstrated a structural modification of the standard molecule occurred for all conditions used, suggesting a modification in functional groups responsible for the biological activity. Furthermore, the TOC analysis showed a significant mineralization of the pollutant (66% from the initial concentration). In addition, both photo-electrooxidation approaches have demonstrated a positive value of S, where the simulated solar irradiation reached the highest value S = 0.6960. The experimental results pointed out evidence that the methodology employed herein for chloramphenicol degradation is greatly interesting and the photo-electrooxidation under simulated solar irradiation is a promising approach for this purpose.

Theoretical Study on Photocatalytic Reduction of CO2 on Anatase/Rutile Mixed-Phase TiO2

The construction of anatase/rutile heterojunctions in TiO2 is an effective way of improving the CO2 photoreduction activity. Yet, the origin of the superior photocatalytic performance is still unclear. To solve this issue, the band edges between anatase and rutile phases were theoretically determined based on the three-phase atomic model of (112)A/II/(101)R, and simultaneously the CO2 reduction processes were meticulously investigated. Our calculations show that photogenerated holes can move readily from anatase to rutile via the thin intermediated II phase, while photoelectrons flowing in the opposite direction may be impeded due to the electron trapping sites at the II phase. However, the large potential drop across the anatase/rutile interface and the strong built-in electric field can provide an effective driving force for photoelectrons' migration to anatase. In addition, the II phase can better enhance the solar light utilization of (112)A/(100)II, including a wide light response range and an intensive optical absorption coefficient. Meanwhile, the mixed-phase TiO2 possesses negligible hydrogenation energy (CO2 to COOH*) and lower rate-limiting energy (HCOOH* to HCO*), which greatly facilitate CH3OH generation. The efficient charge separation, strengthened light absorption, and facile CO2 reduction successfully demonstrate that the anatase/rutile mixed-phase TiO2 is an efficient photocatalyst utilized for CO2 conversion.

Clarifying the Direct Generation of •OH Radicals in Photocatalytic O2 Reduction: Theoretical Prediction Combined with Experimental Validation

This work systematically studied thermocatalytic and photocatalytic pathways of formaldehyde degradation and H-assisted O2 reduction over a Pt13/anatase-TiO2(101) composite via DFT calculations together with constrained molecular dynamics (MD) simulations. We show that photocatalytic O2 reduction on Pt/TiO2 can directly generate •OH radicals (*O2 → *OOH → •OH) via two hydrogenation steps with small barriers, and the product selectivity (*H2O2 or •OH) is decided by the relative position between catalyst Fermi level and •OH/*H2O2 redox potential (theoretical determination of 0.07 V referencing to the SHE). Such a novel reaction channel was furthermore validated at the liquid-solid interface via constrained MD simulations and experimental electron paramagnetic resonance detections, and a wide range of H resources, e.g., *HCHO, *HCO, *H (H+ + e-), can always drive the direct •OH generation. The additional portion of e--triggered •OH radicals are prone to diffuse into solution or the TiO2 surface and furthermore cooperate with the conventional h+-driven photooxidations.

Self-Modification of Defective TiO2 under Controlled H2/Ar Gas Environment and Dynamics of Photoinduced Surface Oxygen Vacancies

In recent years, defective TiO2 has caught considerable research attention because of its potential to overcome the limits of low visible light absorption and fast charge recombination present in pristine TiO2 photocatalysts. Among the different synthesis conditions for defective TiO2, ambient pressure hydrogenation with the addition of Ar as inert gas for safety purposes has been established as an easy method to realize the process. Whether the Ar gas might still influence the resulting photocatalytic properties and defective surface layer remains an open question. Here, we reveal that the gas flow ratio between H2 and Ar has a crucial impact on the defective structure as well as the photocatalyic activity of TiO2. In particular, transmission electron microscopy (TEM) in combination with electron energy loss spectroscopy (EELS) revealed a larger width of the defective surface layer when using a H2/Ar (50 %-50 %) gas mixture over pure H2. A possible reason could be the increase in dynamic viscosity of the gas mixture when Ar is added. Additionally, photoinduced enhanced Raman spectroscopy (PIERS) is implemented as a complementary approach to investigate the dynamics of the defective structures under ambient conditions which cannot be effortlessly realized by vacuum techniques like TEM.

Research Progress on Lignin Depolymerization Strategies: A Review

As the only natural source of aromatic biopolymers, lignin can be converted into value-added chemicals and biofuels, showing great potential in realizing the development of green chemistry. At present, lignin is predominantly used for combustion to generate energy, and the real value of lignin is difficult to maximize. Accordingly, the depolymerization of lignin is of great significance for its high-value utilization. This review discusses the latest progress in the field of lignin depolymerization, including catalytic conversion systems using various thermochemical, chemocatalytic, photocatalytic, electrocatalytic, and biological depolymerization methods, as well as the involved reaction mechanisms and obtained products of various protocols, focusing on green and efficient lignin depolymerization strategies. In addition, the challenges faced by lignin depolymerization are also expounded, putting forward possible directions of developing lignin depolymerization strategies in the future.

Exploring the Dynamics of Charge Transfer in Photocatalysis: Applications of Femtosecond Transient Absorption Spectroscopy

Artificial photocatalytic energy conversion is a very interesting strategy to solve energy crises and environmental problems by directly collecting solar energy, but low photocatalytic conversion efficiency is a bottleneck that restricts the practical application of photocatalytic reactions. The key issue is that the photo-generated charge separation process spans a huge spatio-temporal scale from femtoseconds to seconds, and involves complex physical processes from microscopic atoms to macroscopic materials. Femtosecond transient absorption (fs-TA) spectroscopy is a powerful tool for studying electron transfer paths in photogenerated carrier dynamics of photocatalysts. By extracting the attenuation characteristics of the spectra, the quenching path and lifetimes of carriers can be simulated on femtosecond and picosecond time scales. This paper introduces the principle of transient absorption, typical dynamic processes and the application of femtosecond transient absorption spectroscopy in photocatalysis, and summarizes the bottlenecks faced by ultrafast spectroscopy in photocatalytic applications, as well as future research directions and solutions. This will provide inspiration for understanding the charge transfer mechanism of photocatalytic processes.

Multi-metallic MOF based composites for environmental applications: synergizing metal centers and interactions

The escalating threat of environmental issues to both nature and humanity over the past two decades underscores the urgency of addressing environmental pollutants. Metal-organic frameworks (MOFs) have emerged as highly promising materials for tackling these challenges. Since their rise in popularity, extensive research has been conducted on MOFs, spanning from design and synthesis to a wide array of applications, such as environmental remediation, gas storage and separation, catalysis, sensors, biomedical and drug delivery systems, energy storage and conversion, and optoelectronic devices, etc. MOFs possess a multitude of advantageous properties such as large specific surface area, tunable porosity, diverse pore structures, multi-channel design, and molecular sieve capabilities, etc., making them particularly attractive for environmental applications. MOF-based composites inherit the excellent properties of MOFs and also exhibit unique physicochemical properties and structures. The tailoring of central coordinated metal ions in MOFs is critical for their adaptability in environmental applications. Although many reviews on monometallic, bimetallic, and polymetallic MOFs have been published, few reviews focusing on MOF-based composites with monometallic, bimetallic, and multi-metallic centers in the context of environmental pollutant treatment have been reported. This review addresses this gap by providing an in-depth overview of the recent progress in MOF-based composites, emphasizing their applications in hazardous gas sensing, electromagnetic wave absorption (EMWA), and pollutant degradation in both aqueous and atmospheric environments and highlighting the importance of the number and type of metal centers present. Additionally, the various categories of MOFs are summarized. MOF-based composites demonstrate significant promise in addressing environmental challenges, and this review provides a clear and valuable perspective on their potential in environmental applications.

Highly efficient mobility, separation and charge transfer in black SnO2-TiO2 structures with co-catalysts: the key step for the photocatalytic hydrogen evolution

Oxygen vacancies and co-catalysts enhance photocatalytic hydrogen production by improving the charge carrier separation. Herein, the black SnO2-TiO2 structure (BST) was synthesized for the first time by two consecutive methods. First, the sol-gel nucleation method allowed TiO2 to form on the SnO2 nanoparticles, creating a strong interaction and direct contact between them. Subsequently, this structure was reduced by NaBH4 during thermal treatment, generating (Ti3+/Sn2+) states to form the BST. Then, 2 wt% of Co, Cu or Pd was impregnated onto BST. The results showed that the activity raised with the presence of Ti3+/Sn2+ states, reaching a hydrogen generation rate of 147.50 μmol g-1 h-1 with BST in comparison with the rate of 99.50 μmol g-1 h-1 for white SnO2-TiO2. On the other hand, the interaction of the co-catalysts with the BST structure helped to increase the photocatalytic hydrogen production rates: 154.10 μmol g-1 h-1, 384.18 μmol g-1 h-1 and 480.20 μmol g-1 h-1 for cobalt-BST, copper-BST and palladium-BST, respectively. The results can be associated with the creation of Ti3+/Sn2+ at the BST interface that changes the lifetime of the charge carrier, improving the separation of photogenerated electrons and holes and the co-catalysts in the structures move the flat band position and increasing the photocurrent response to having electrons with greater reducing power.

Kinetic modeling of the photocatalytic degradation of acetaminophen and its main transformation products

In this study, a kinetic model of the heterogeneous photocatalytic degradation of acetaminophen and its main transformation products is presented. Kinetic photocatalytic modeling and photon absorption rate modeling were included. Monte Carlo method was used to model the photon absorption process. Experiments were carried out in a reactor operated in batch mode and TiO2 nanotubes were used as photocatalyst irradiated with 254 nm UVC. Kinetic parameters were estimated from the experiments data by applying a non-linear regression procedure. Intrinsic expressions to the kinetics of acetaminophen degradation and its main transformation products were derived. Model, kinetics and photon absorption formulations and parameters proved to be affordable for describing the photocatalytic degradation of acetaminophen, but improvements should be done for better description of formation and oxidation kinetics of main transformation products. The model should be tested with other pharmaceuticals and emergent pollutants to calibrate it and evaluate its applicability in a wide range of compounds.

Photocatalytic Synthesis of Glycine from Methanol and Nitrate

Photocatalytic utilization of methanol and nitrate as carbon and nitrogen sources for the direct synthesis of amino acids could provide a sustainable way for the valorization of green "liquid sunlight" and nitrate waste. In this study, we develop an efficient photochemical method to synthesize glycine directly from methanol and nitrate, which cascades the C-C coupling to form glycol, nitrate reduction to NH3, and finally C-N coupling to generate glycine. Interestingly, the involved photocatalytic tandem reactions show a synergistic effect, in which the presence of nitrate is the dominant factor to enable the overall reaction and reach high synthetic efficiency. Ba2+-TiO2 nanoparticles are confirmed as a feasible and efficient catalyst system for the photosynthesis of glycine with a remarkable glycine photosynthesis rate of 870 μmol gcat -1 h-1 under optimal conditions. This work establishes a novel catalytic system for amino acid synthesis from methanol and nitrate under mild conditions. These results also allow us to further suppose the formation pathways of amino acids on the primitive earth, as an extension to proposals based on the Miller-Urey experiments.

Real-space imaging for discovering a rotated node structure in metal-organic framework

Resolving the detailed structures of metal organic frameworks is of great significance for understanding their structure-property relation. Real-space imaging methods could exhibit superiority in revealing not only the local structure but also the bulk symmetry of these complex porous materials, compared to reciprocal-space diffraction methods, despite the technical challenges. Here we apply a low-dose imaging technique to clearly resolve the atomic structures of building units in a metal-organic framework, MIL-125. An unexpected node structure is discovered by directly imaging the rotation of Ti-O nodes, different from the unrotated structure predicted by previous X-ray diffraction. The imaged structure and symmetry can be confirmed by the structural simulations and energy calculations. Then, the distribution of node rotation from the edge to the center of a MIL-125 particle is revealed by the image analysis of Ti-O rotation. The related defects and surface terminations in MIL-125 are also investigated in the real-space images. These results not only unraveled the node symmetry in MIL-125 with atomic resolution but also inspired further studies on discovering more unpredicted structural changes in other porous materials by real-space imaging methods.

Enhanced TiO2-Based Photocatalytic Volatile Organic Compound Decomposition Combined with Ultrasonic Atomization in the Co-Presence of Carbon Black and Heavy Metal Nanoparticles

Volatile organic compounds (VOCs) are representative indoor air pollutants that negatively affect the human body owing to their toxicity. One of the most promising methods for VOC removal is photocatalytic degradation using TiO2. In this study, the addition of carbon black (CB) and heavy metal nanoparticles (NPs) was investigated to improve the efficiency of a TiO2-based photocatalytic VOC decomposition system combined with ultrasonic atomization and ultraviolet irradiation, as described previously. The addition of CB and Ag NPs significantly improved the degradation efficiency. A comparison with other heavy metal nanoparticles and their respective roles are discussed.

Perspectives for Photocatalytic Decomposition of Environmental Pollutants on Photoactive Particles of Soil Minerals

The literature shows that both in laboratory and in industrial conditions, the photocatalytic oxidation method copes quite well with degradation of most environmental toxins and pathogenic microorganisms. However, the effective utilization of photocatalytic processes for environmental decontamination and disinfection requires significant technological advancement in both the area of semiconductor material synthesis and its application. Here, we focused on the presence and "photocatalytic capability" of photocatalysts among soil minerals and their potential contributions to the environmental decontamination in vitro and in vivo. Reactions caused by sunlight on the soil surface are involved in its normal redox activity, taking part also in the soil decontamination. However, their importance for decontamination in vivo cannot be overstated, due to the diversity of soils on the Earth, which is caused by the environmental conditions, such as climate, parent material, relief, vegetation, etc. The sunlight-induced reactions are just a part of complicated soil chemistry processes dependent on a plethora of environmental determinates. The multiplicity of affecting factors, which we tried to sketch from the perspective of chemists and environmental scientists, makes us rather skeptical about the effectiveness of the photocatalytic decontamination in vivo. On the other hand, there is a huge potential of the soils as the alternative and probably cheaper source of useful photocatalytic materials of unique properties. In our opinion, establishing collaboration between experts from different disciplines is the most crucial opportunity, as well as a challenge, for the advancement of photocatalysis.

Two-dimensional Janus monolayers SPtAZ2 (A = Si and Ge; Z = N, P, and As): insight into their photocatalytic properties via first-principles calculations

As a derivative of the two-dimensional material family, two-dimensional Janus materials have garnered widespread attention in recent years. Consequently, in this work, we systematically investigated the stability, electronic properties, photocatalytic properties, optical properties, and carrier mobility of SPtAZ2 (A = Si and Ge; Z = N, P, and As) monolayers using first-principles calculations. In the equilibrium state, we identified four stable structures that exhibited the properties of indirect band gap semiconductors using the HSE06 hybrid functional. Through the exploration of the photocatalytic and optical properties of these four stable structures, we observed that SPtSiN2, SPtSiP2, and SPtGeAs2 monolayers possess favorable band edge positions, high solar-to-hydrogen efficiency (up to 30.74%), and light absorption efficiency, thus endowing these three structures with commendable photocatalytic and light absorption performance. We additionally calculated the carrier mobility of these three structures and identified significant differences in electron and hole mobilities in the same direction, facilitating the effective separation of electrons and holes. Finally, we explored the effects of biaxial strain on the electronic properties, photocatalysis, and light absorption of stable SPtAZ2 monolayers. Our research results not only expand the 2D Janus material family, but also successfully predict a type of photocatalyst capable of utilizing visible light for overall water splitting.

Step-induced double-row pattern of interfacial water on rutile TiO2(110) under electrochemical conditions

Metal oxides are promising (photo)electrocatalysts for sustainable energy technologies due to their good activity and abundant resources. Their applications such as photocatalytic water splitting predominantly involve aqueous interfaces under electrochemical conditions, but in situ probing oxide-water interfaces is proven to be extremely challenging. Here, we present an electrochemical scanning tunneling microscopy (EC-STM) study on the rutile TiO2(110)-water interface, and by tuning surface redox chemistry with careful potential control we are able to obtain high quality images of interfacial structures with atomic details. It is interesting to find that the interfacial water exhibits an unexpected double-row pattern that has never been observed. This finding is confirmed by performing a large scale simulation of a stepped interface model enabled by machine learning accelerated molecular dynamics (MLMD) with ab initio accuracy. Furthermore, we show that this pattern is induced by the steps present on the surface, which can propagate across the terraces through interfacial hydrogen bonds. Our work demonstrates that by combining EC-STM and MLMD we can obtain new atomic details of interfacial structures that are valuable to understand the activity of oxides under realistic conditions.

Correlated electron-nuclear dynamics of photoinduced water dissociation on rutile TiO2

Elucidating the mechanism of photoinduced water splitting on TiO2 is important for advancing the understanding of photocatalysis and the ability to control photocatalytic surface reactions. However, incomplete experimental information and complex coupled electron-nuclear motion make the microscopic understanding challenging. Here we analyse the atomic-scale pathways of photogenerated charge carrier transport and photoinduced water dissociation at the prototypical water-rutile TiO2(110) interface using first-principles dynamics simulations. Two distinct mechanisms are observed. Field-initiated electron migration leads to adsorbed water dissociation via proton transfer to a surface bridging oxygen. In the other pathway, adsorbed water dissociation occurs via proton donation to a second-layer water molecule coupled to photoexcited-hole transfer promoted by in-plane surface lattice distortions. Two stages of non-adiabatic in-plane lattice motion-expansion and recovery-are observed, which are closely associated with population changes in Ti3d orbitals. Controlling such highly correlated electron-nuclear dynamics may provide opportunities for boosting the performance of photocatalytic materials.

Controlling nanoparticle placement in Au/TiO2 inverse opal photocatalysts

Gold nanoparticle-loaded titania (Au/TiO2) inverse opals are highly ordered three-dimensional photonic structures with enhanced photocatalytic properties. However, fine control over the placement of the Au nanoparticles in the inverse opal structures remains challenging with traditional preparative methods. Here, we present a multi-component co-assembly strategy to prepare high-quality Au/TiO2 inverse opal films in which Au nanoparticles are either located on, or inside the TiO2 matrix, as verified using electron tomography. We report that Au nanoparticles embedded in the TiO2 support exhibit enhanced thermal and mechanical stability compared to non-embedded nanoparticles that are more prone to both leaching and sintering.

Heterogeneous Photocatalytic C(sp2)-H Activation of Formate for Hydrocarboxylation of Alkenes

Light-driven carboxylation offers a promising approach for synthesizing valuable fine chemicals under mild conditions. Here we disclose a heterogeneous photocatalytic strategy of C(sp2)-H activation of formate for hydrocarboxylation of alkenes over zinc indium sulfide (ZnIn2S4) under visible light. This protocol functions well with a variety of substituted styrenes with good to excellent yields; it also works for unactivated alkenes albeit with lower yields. Mechanistic studies confirm the existence of CO2⋅- as a key intermediate. It was found that C(sp2)-H activation of formate is induced by S⋅ species on the surface of ZnIn2S4 via hydrogen atom transfer (HAT) instead of a photogenerated hole oxidation mechanism. Moreover, both cleavage of the C(sp2)-H of HCOO- and formation of a benzylic anion were found to be involved in the rate-determining step for the hydrocarboxylation of styrene.

Plasmon-Induced Hot Electrons in Nanostructured Materials: Generation, Collection, and Application to Photochemistry

Plasmon refers to the coherent oscillation of all conduction-band electrons in a nanostructure made of a metal or a heavily doped semiconductor. Upon excitation, the plasmon can decay through different channels, including nonradiative Landau damping for the generation of plasmon-induced energetic carriers, the so-called hot electrons and holes. The energetic carriers can be collected by transferring to a functional material situated next to the plasmonic component in a hybrid configuration to facilitate a range of photochemical processes for energy or chemical conversion. This article centers on the recent advancement in generating and utilizing plasmon-induced hot electrons in a rich variety of hybrid nanostructures. After a brief introduction to the fundamentals of hot-electron generation and decay in plasmonic nanocrystals, we extensively discuss how to collect the hot electrons with various types of functional materials. With a focus on plasmonic nanocrystals made of metals, we also briefly examine those based upon heavily doped semiconductors. Finally, we illustrate how site-selected growth can be leveraged for the rational fabrication of different types of hybrid nanostructures, with an emphasis on the parameters that can be experimentally controlled to tailor the properties for various applications.