Good partnership between sulfur and fluorine: sulfur-based fluorination and fluoroalkylation reagents for organic synthesis

Tetrafluoroisopropylation of alkenes and alkynes enabled by photocatalytic consecutive difluoromethylation with CF2HSO2Na

Direct assembly of complex fluorinated motifs from simple fluorine sources is an attractive frontier of synthetic chemistry. Reported herein is an unconventional protocol for achieving tetrafluoroisopropylation by using commercially available CF2HSO2Na as a convenient source of the tetrafluoroisopropyl [(CF2H)2CH] group, which finds widespread applications in life science and material science. Visible-light-induced hydrotetrafluoroisopropylation of alkenes and carbotetrafluoroisopropylation of alkynes have been thus developed. Various structurally diverse α-tetrafluoroisopropyl carbonyls and cyclopentanones are selectively constructed under mild conditions. A photocatalytic triple difluoromethylation cascade, driven by consecutive reductive radical/polar crossover processes, leads to the direct assembly of a tetrafluoroisopropyl moiety from CF2HSO2Na. This C1-to-C3 fluoroalkylation protocol provides a practical strategy for the rapid construction of polyfluorinated compounds that are otherwise difficult to access, thus significantly enhancing the boundary of fluoroalkylation chemistry.

Design, Synthesis, and Bioactivity of Trifluoroethylthio-Substituted Phenylpyrazole Derivatives

As the first marketed phenylpyrazole insecticide, fipronil exhibited remarkable broad-spectrum insecticidal activity. However, it poses a significant threat to aquatic organisms and bees due to its high toxicity. Herein, 35 phenylpyrazole derivatives containing a trifluoroethylthio group on the 4 position of the pyrazole ring were designed and synthesized. The predicted physicochemical properties of all of the compounds were within a reasonable range. The biological assay results revealed that compound 7 showed 69.7% lethality against Aedes albopictus (A. albopictus) at the concentration of 0.125 mg/L. Compounds 7, 7g, 8d, and 10j showed superior insecticidal activity for the control of Plutella xylostella (P. xylostella). Notably, compound 7 showed similar insecticidal activity against Aphis craccivora (A. craccivora) compared with fipronil. Potential surface calculation and molecular docking suggested that different lipophilicity and binding models to the Musca domestica (M. domestica) gamma-aminobutyric acid receptors may be responsible for the decreased activity of the tested derivatives. Toxicity tests indicated that compound 8d (LC50 = 14.28 mg/L) induced obviously 14-fold lower toxicity than fipronil (LC50 = 1.05 mg/L) on embryonic-juvenile zebrafish development.

Activation of SO2F2 at a Rhodium PNP Pincer Complex: Ligand Supported S-F Bond Cleavage to Generate NSO2F Derivatives

The κ2-(P,N)-phosphine ligand precursor NH(CH2CH2PCy2)2 can be used for the synthesis of the rhodium(I) complex [Rh(CO){ĸ3-(P,N,P)-Cy2PC2H4NHC2H4PCy2}][Cl] (1). The deprotonated complex [Rh(CO){ĸ3-(P,N,P)-Cy2PC2H4NC2H4PCy2}] (2) shows a cooperative reactivity of the PNP ligand in the activation reaction of SO2F2 to yield the rhodium fluorido complex trans-[Rh(F)(CO){ĸ2-(P,P)-Cy2PC2H4N(SO2F)C2H4PCy2}]2 (3) by S-F bond cleavage. It is remarkable that no reaction was observed when 3 was treated with hydrogen sources e. g. dihydrogen, organosilicon compounds such as triethylsilane or TMS-CF3 and different fluorine sources such as SF4 or Selectfluor®. However, the treatment of complex 3 with XeF2 in the presence of CsF resulted in the formation of the unique fluorido rhodium(III) complex cis,trans-[Rh(F)3(CO){ĸ2-(P,P)-Cy2PC2H4N(SO2F)C2H4PCy2}]2 (4). In the presence of pyridine(HF)X or BF3 the fluorido complex 3 converted into the dicationic complexes [Rh(CO){ĸ2-(P,P)-Cy2PC2H4N(SO2F)C2H4PCy2}]2[XF]2, X=HF (5) or BF3 (6), respectively.

Fluorine-Effect-Enabled Photocatalytic 4-Exo-Trig Cyclization Cascade to Access Fluoroalkylated Cyclobutanes

Cyclobutanes are popular structural units in bioactive compounds and versatile intermediates in synthetic chemistry, but their synthesis is challenging owing to high ring strain. In this study, a novel method for highly regio- and diastereoselective synthesis of fluoroalkylcyclobutanes bearing vicinal quaternary and tertiary stereocenters is realized by a photocatalytic 4-exo-trig cyclization cascade of thioalkynes or trifluoromethylalkenes. Density functional theory calculations reveal that a unique fluorine effect, arising from hyperconjugative π→σ*C-F interactions, accounts for the regio-reversed radical addition at the sterically hindered alkene carbon, which facilitates an unprecedented 4-exo-trig ring closure. This chemistry enables the direct and controllable construction of medicinally valuable quaternary-carbon-containing cyclobutanes from readily available raw materials, nicely complementing the existing methods.

N-Heteroaromatic Fluoroalkylation through Ligand Coupling Reaction of Sulfones

Ligand coupling on hypervalent main group elements has emerged as a pivotal methodology for the synthesis of functionalized N-heteroaromatic compounds in recent years due to the avoidance of transition metals and the mildness of the reaction conditions. In this direction, the reaction of N-heteroaryl sulfur(IV) and N-heteroaryl phosphorus(V) compounds has been well studied. However, the ligand coupling of sulfur(VI) is still underdeveloped and the reaction of alkyl N-heteroarylsulfones is still elusive, which does not match the high status of sulfones as the chemical chameleons in organic synthesis. Here we present a ligand coupling-enabled formal SO2 extrusion of fluoroalkyl 2-azaheteroarylsulfones under the promotion of Grignard reagents, which not only enriches the chemistry of sulfones, but also provides a novel and practical synthetic tool towards N-heteroaromatic fluoroalkylation.

Direct C-H Sulfuration: Synthesis of Disulfides, Dithiocarbamates, Xanthates, Thiocarbamates and Thiocarbonates

In light of the important biological activities and widespread applications of organic disulfides, dithiocarbamates, xanthates, thiocarbamates and thiocarbonates, the continual persuit of efficient methods for their synthesis remains crucial. Traditionally, the preparation of such compounds heavily relied on intricate multi-step syntheses and the use of highly prefunctionalized starting materials. Over the past two decades, the direct sulfuration of C-H bonds has evolved into a straightforward, atom- and step-economical method for the preparation of organosulfur compounds. This review aims to provide an up-to-date discussion on direct C-H disulfuration, dithiocarbamation, xanthylation, thiocarbamation and thiocarbonation, with a special focus on describing scopes and mechanistic aspects. Moreover, the synthetic limitations and applications of some of these methodologies, along with the key unsolved challenges to be addressed in the future are also discussed. The majority of examples covered in this review are accomplished via metal-free, photochemical or electrochemical approaches, which are in alignment with the overraching objectives of green and sustainable chemistry. This comprehensive review aims to consolidate recent advancements, providing valuable insights into the dynamic landscape of efficient and sustainable synthetic strategies for these crucial classes of organosulfur compounds.

Visible Light-Catalyzed Reactions of Polysulfide (DBSPS) with Aryldiazonium

A visible light-catalyzed radical coupling reaction of polysulfide reagents with aryldiazonium was developed, which gave thiosulfonates under mild conditions. In this reaction, the thiosulfonates were isolated in good yields with a broad tolerance to functional groups. And the synthesis of diaryl monosulfides were achieved through a step-by-step reaction of two molecular aryldiazonium with DBSPS, where the sulfur source was provided by DBSPS. It was worth noting that the reaction of this monosulfides could also be achieved by a one pot two-step process. The described polysulfide reagents were able to produce three new radicals: sulfonyl radicals, sulfur-sulfonyl radicals and sulfur-sulfur-sulfonyl radicals.

Selective Mono-Defluorinative Cross-Coupling of Trifluoromethyl arenes via Multiphoton Photoredox Catalysis

A new cross-coupling of trifluoromethyl arenes has been realized via multiphoton photoredox catalysis. Trifluoromethyl arenes were demonstrated to undergo selective mono-defluorinative alkylation under mild reaction conditions providing access to a series of valuable α,α-difluorobenzylic compounds. The reaction shows broad substrate scope and general functional group tolerance. In addition to the electron-deficient trifluoromethyl arenes that are easily reduced to the corresponding radical anion, more challenging electron-rich substrates were also successfully applied. Steady-State Stern-Volmer quenching studies indicated that the trifluoromethyl arenes were reduced by the multiphoton excited Ir-based photocatalyst.

I2-Cs2CO3 Mediated Intramolecular C2-Amination and Oxidative Rearrangement Cascade of C-3 Phenylthio Indoles: A Route to Synthesize Thiosulfonate-Embedded 2-Iminoindolin-3-ones

An efficient, transition-metal-free protocol employing I2/Cs2CO3 for the synthesis of thiosulfonate containing 2-iminoindolin-3-ones motifs has been developed from C-3 phenylthio indoles. The reaction proceeded through intramolecular cyclization involving C-N bond formation, leading to the formation of indole-fused benzothiazines as a key intermediate. Remarkably, Cs2CO3 played a crucial role in the reaction as an oxygen source, enabling oxidative rearrangement with [1,4]-sulfonyl migration to furnish the final products with the formation of multiple functional groups such as C═O, C═N, and S-SO2.

Zinc 1,1,2,2-Tetrafluoroethanesulfinate: A Synthetically Useful Oxidative and Photoredox Source of the 1,1,2,2-Tetrafluoroethyl Radical

1,1,2,2-Tetrafluoroethyl-containing molecules are of potential importance in drug discovery, but the efficient synthesis of such compounds is still relatively unexplored due to the lack of readily available reagents for the incorporation of the HCF2CF2 group. Herein, we introduce a new reagent, zinc 1,1,2,2-tetrafluoroethanesulfinate, which can be useful for the oxidative tetrafluoroethylation of arylboronic acids and heteroarenes as well as for a novel photoredox, three component hydro-tetrafluoroethylation of two alkenes of complementary reactivity.

Review and Theoretical Analysis of Fluorinated Radicals in Direct CAr-H Functionalization of (Hetero)arenes

We highlight key contributions in the field of direct radical CAr- H (hetero)aromatic functionalization involving fluorinated radicals. A compilation of Functional Group Transfer Reagents and their diverse activation mechanisms leading to the release of radicals are discussed. The substrate scope for each radical is analyzed and classified into three categories according to the electronic properties of the substrates. Density functional theory computational analysis provides insights into the chemical reactivity of several fluorinated radicals through their electrophilicity and nucleophilicity parameters. Theoretical analysis of their reduction potentials also highlights the remarkable correlation between electrophilicity and oxidizing ability. It is also established that highly fluorinated radicals (e.g. ⋅OCF3) are capable of engaging in single-electron transfer (SET) processes rather than radical addition, which is in good agreement with experimental literature data. A reactivity scale, based on activation barrier of addition of these radicals to benzene is also elaborated using the high accuracy DLPNO-(U)CCSD(T) method.

Controllable Double Difluoromethylene Insertions into S-Cu Bonds: (Arylthio)tetrafluoroethylation of Aryl Iodides with TMSCF2Br

A new method of constructing "ArSCF2CF2Cu" from ArSCu and TMSCF2Br (TMS=trimethylsilyl) has been developed. The cross-coupling reactions of the obtained "ArSCF2CF2Cu" with diverse aryl iodides (Ar'I) provide an efficient access to Ar'CF2CF2SAr. Mechanistic studies demonstrate that the "ArSCF2CF2Cu" species were generated through controllable double difluoromethylene insertions into ArS-Cu bonds rather than the 1,2-addition of ArSCu to tetrafluoroethylene.

Catalytic Asymmetric Difluoroalkylation Using In Situ Generated Difluoroenol Species as the Privileged Synthon

A robust and practical difluoroalkylation synthon, α,α-difluoroenol species, which generated in situ from trifluoromethyl diazo compounds and water in the presence of dirhodium complex, is disclosed. As compared to the presynthesized difluoroenoxysilane and in situ formed difluoroenolate under basic conditions, this difluoroenol intermediate displayed versatile reactivity, resulting in dramatically improved enantioselectivity under mild conditions. As demonstrated in catalytic asymmetric aldol reaction and Mannich reactions with ketones or imines in the presence of chiral organocatalysts, quinine-derived urea, and chiral phosphoric acid (CPA), respectively, this relay catalysis strategy provides an effective platform for applying asymmetric fluorination chemistry. Moreover, this method features a novel 1,2-difunctionalization process via installation of a carbonyl motif and an alkyl group on two vicinal carbons, which is a complementary protocol to the metal carbene gem-difunctionalization reaction.

Silver-Catalyzed Decarboxylative Remote Fluorination via a Zwitterion-Promoted 1,4-Heteroaryl Migration

A silver-catalyzed decarboxylative remote fluorination via a zwitterion-promoted 1,4-heteroaryl migration has been developed. A variety of heteroaryl-tethered benzyl fluorides have been readily synthesized with good regioselectivity under mild conditions. The zwitterion of the substrate is suggested to accelerate the 1,4-heteroaryl migration, which determines the regioselectivity of this transformation.

Access to CF2COR-Containing Quinazolinones via Visible-Light-Induced Domino Difluoroalkylation/Cyclization of N-Cyanamide Alkenes

A green and highly efficient visible-light-induced radical cascade difluoroalkylation/cyclization reaction of N-cyanamide alkenes has been developed. A variety of CF2COR-containing quinazolinones have been obtained in high yields with cheap non-metallic 4CzIPN as the photocatalyst. This photocatalytic reaction provides rapid, facile, and practical access to valuable polycyclic quinazolinone, and it is amenable to the gram scale.

Access to All-Carbon Quaternary Centers by Photocatalytic Fluoroalkylation of α-Halo Carbonyl Compounds

Perfluoroalkyl groups have become significantly important in pharmaceutical and agrochemical applications. In this study, we present a visible light-mediated photoredox neutral strategy for the fluoroalkylation of tertiary alkyl chlorides under transition-metal-free conditions. This method allows for the facile synthesis of fluoroalkylated all-carbon quaternary centers, exhibiting excellent functional group compatibility. Mechanistic studies reveal the involvement of two reactive radical intermediates and the in situ formation of metal enolates in a radical-polar crossover manner. The versatility of this methodology is demonstrated through synthetic transformations based on the carbonyl group, showcasing its potential for the rapid assembly of diverse organic molecules bearing fluoroalkyl all-carbon quaternary centers.

A Journey of the Development of Privileged Difluorocarbene Reagents TMSCF2X (X = Br, F, Cl) for Organic Synthesis

ConspectusAs fluorine has played an increasingly important role in modulating the physical, chemical, and biological properties of organic molecules, the selective introduction of fluorine atom(s) or fluorinated moieties into target molecules has become a powerful tool in the development of new pharmaceuticals, agrochemicals, and functional materials. In this context, the difluoromethylene (CF2) and difluoromethyl (CF2H) groups are of special interest because of their ability to serve as bioisosteres of ethereal oxygen atoms and hydroxyl (OH) and thiol (SH) groups, respectively. Difluorocarbene is one of the most versatile reactive intermediates to incorporate CF2 and CF2H groups; however, before 2006, most of the previously known difluorocarbene reagents suffered from several drawbacks such as using ozone-depleting substances (ODSs), difficult-to-handle reagents, or harsh reaction conditions or having narrow substrate scope and/or low yields. Moreover, the reactivity of difluorocarbene generated from different precursors (reagents) was often unpredictable, since the difluorocarbene generation conditions (activation modes) of various difluorocarbene precursors are different, and these conditions may mismatch those required for subsequent difluorocarbene-involved transformations. Therefore, the development of new environmentally friendly and versatile difluorocarbene reagents, as well as the investigation of the mechanistic insights into difluorocarbene-involved reactions, has been highly desirable.In this Account, we summarize our contributions to the development of new difluorocarbene reagents and their applications in organic synthesis since 2006. We have developed seven new difluorocarbene reagents, including 2-chloro-2,2-difluoroacetophenone (1), chlorodifluoromethyl phenyl sulfone (2), S-difluoromethyl-S-phenyl-N-tosylsulfoximine (3), difluoromethyltri(n-butyl)ammonium chloride (4), (chlorodifluoromethyl)trimethylsilane (TMSCF2Cl, 5), (bromodifluoromethyl)trimethylsilane (TMSCF2Br, 6), and (trifluoromethyl)trimethylsilane (TMSCF3, 7). In this journey, we realized the key factor for an ideal difluorocarbene reagent that can be used for a broad range of reactions, that is, the reagent should allow various activation modes for the generation of difluorocarbene species, such as under basic/acidic/neutral conditions, at wide range of temperatures, and in different solvents, which are compatible with a wide range of difluorocarbene-involved transformations. Among all known difluorocarbene reagents, silanes TMSCF2X (X = Br, F, Cl) have stood out as privileged ones, which paves a new avenue for further developing difluorocarbene chemistry. In particular, TMSCF2Br was recognized as an "all-rounder": TMSCF2Br can be applied in almost all common difluorocarbene-involved reactions, and more importantly, TMSCF2Br also enables many other novel transformations that other difluorocarbene reagents cannot achieve, thanks to its unique structure and rich activation modes of releasing difluorocarbene under different reaction conditions. It can be expected that with the commercial availability of TMSCF2X reagents (X = Br, F, Cl) now, the development of difluorocarbene chemistry will be accelerated in the years to come.

Visible light-promoted difluoromethylthiolation of cycloalkanols by C-C bond cleavage

A mild and general methodology for the difluoromethylthiolation of cycloalkanols has been developed by employing N-difluoromethylthiophthalimide as the SCF2H radical source, in combination with an acridinium-derived organo-photosensitizer, under redox-neutral conditions. This reaction protocol demonstrates high efficiency, scalability, and mild reaction conditions, thus presenting a green approach for the rapid synthesis of distal difluoromethylthiolated alkyl ketones that are challenging to be synthesized through alternative means.

Synthesis of gem-Difluoro-3,4-dihydro-2H-pyrans via a TfOH-Catalyzed [4 + 2] Annulation of Difluoroenoxysilanes with α-Cyano Chalcones

Difluoroenoxysilane, a commonly used difluoroallylating reagent, has attracted considerable attention in recent years. However, its application in the annulation reaction for the construction of fluorinated heterocyclic compounds remains relatively limited. Presented here is the Brønsted acid-catalyzed efficient formal [4 + 2] annulation of difluoroenoxysilanes with α-cyano chalcones. The developed protocol demonstrates tolerance to various substituents under mild reaction conditions, providing a reliable approach to construct gem-difluoro-3,4-dihydro-2H-pyrans in good to excellent yields with high diastereoselectivities.

p-Toluenesulfonic acid-promoted organic transformations for the generation of molecular complexity

Since the beginning of this century, p-toluenesulfonic acid (p-TSA) catalysed organic transformations have been an active area of research for developing efficient synthetic methodologies. Often, catalysis using p-TSA is associated with many advantages, such as operational simplicity, high selectivity, excellent yields, and ease of product isolation, which make organic synthesis convenient and versatile. Notably, p-TSA is a non-toxic, commercially available, inexpensive solid organic compound that is soluble in water, alcohols, and other polar organic solvents. p-TSA is a strong acid compared to many protic or mineral acids and its high acidity helps activate different organic functional groups. p-TSA-promoted conversions are fast, have a high atom and pot economy, and feature a multiple bond-forming index. Therefore, the utilization of p-TSA enables the synthesis of many important structural scaffolds without any hazardous metals, making it desirable in numerous applications of sustainable and green chemistry. Recently, this emerging area of research has become one of the pillars of synthetic organic chemistry to synthesise biologically relevant, complex carbocycles and heterocycles. This study provides a comprehensive summary of methods, applications, and mechanistic insights into p-TSA-catalysed organic transformations, covering the literature reports that have appeared since 2012.

Synthesis of gem-Difluorinated 2,3-Dihydrobenzofurans Using Freon-22 via [4 + 1] Annulation of Difluorocarbene and Antitumor Activity Evaluation

As an inexpensive industrial chemical, chlorodifluoromethane (Freon-22), despite its relatively low reactivity, can serve as a practical CF2 source for the construction of gem-difluorinated ring structures. Here, we develop a protocol for the efficient assembly of valuable fluorinated 2,3-dihydrobenzofurans from the [4 + 1] annulation in good yields under basic conditions. The reliable practicability and scalability of the process have also been demonstrated by preparation at the multigram scale, late-stage modifications of pharmaceutical molecules, and potential antitumor potency.

ortho-Cyanomethylation of aryl fluoroalkyl sulfoxides via a sulfonium-Claisen rearrangement

We hereby report the ortho-cyanomethylation of aryl fluoroalkyl sulfoxides with acetonitrile through a sulfonium-Claisen-type rearrangement. This reaction enables the incorporation of two valuable functional groups, such as the cyanomethyl group and the fluoroalkylthio group, into arenes. Remarkably, fluoroalkylthio groups, such as SCFH2 and SCF2H, bearing active hydrogen, are well tolerated by the reaction. The success of the reaction relies on the use of an excess amount of acetonitrile and the electronegative effect of fluoroalkyl substituents, both of which promote the electrophilic assembly of sulfoxides with acetonitrile. Consequently, the sulfonium-Claisen rearrangement reaction tolerates a wide variety of fluoroalkyl sulfoxides bearing functional groups including halides, nitriles, ketones, sulfones, and amides, which are appealing for subsequent elaboration and exploration.

Divergent Generation of the Difluoroalkyl Radical and Difluorocarbene via Selective Cleavage of C-S Bonds of the Sulfox-CF2SO2Ph Reagent

A new difluoroalkylation reagent Sulfox-CF2SO2Ph bearing both sulfoximine and sulfone moieties was prepared from commercially available SulfoxFluor and PhSO2CF2H. On one hand, the Sulfox-CF2SO2Ph reagent could act as a (phenylsulfonyl)difluoromethyl radical source under photoredox catalysis, in which the arylsulfoximidoyl group is selectively removed. On the other hand, under basic conditions, Sulfox-CF2SO2Ph could serve as a difluorocarbene precursor for S- and O-difluoromethylations with S- and O-nucleophiles, respectively, in which the phenylsulfonyl group in Sulfox-CF2SO2Ph is selectively removed (followed by α-elimination of the arylsulfoximidoyl group).

Benzyl Deuteriodifluoromethyl Sulfoxide: An Easily Accessible and Stable Reagent for Direct Deuterodifluoromethylthiolation

A new, stable and scalable reagent based on a sulfoxide skeleton for direct deuteriodifluoromethylthiolation has been developed. The reagent displays excellent reactivities toward Tf2O promoted C-H deuteriodifluoromethylthiolation of electron-rich arenes, indoles, alkenes, and intramolecular lactonization of 2-alkynylbenzoates. Moreover, high deuteration rates and good to excellent yields were achieved under metal-free reaction conditions. As a result, a wide range of deuteriodifluoromethylthilolated compounds were prepared, enabling further applications in drug discovery.

Recent advances in selective mono-/dichalcogenation and exclusive dichalcogenation of C(sp2)-H and C(sp3)-H bonds

Organochalcogen compounds are prevalent in numerous natural products, pharmaceuticals, agrochemicals, polymers, biological molecules and synthetic intermediates. Direct chalcogenation of C-H bonds has evolved as a step- and atom-economical method for the synthesis of chalcogen-bearing compounds. Nevertheless, direct C-H chalcogenation severely lags behind C-C, C-N and C-O bond formations. Moreover, compared with the C-H monochalcogenation, reports of selective mono-/dichalcogenation and exclusive dichalcogenation of C-H bonds are relatively scarce. The past decade has witnessed significant advancements in selective mono-/dichalcogenation and exclusive dichalcogenation of various C(sp2)-H and C(sp3)-H bonds via transition-metal-catalyzed/mediated, photocatalytic, electrochemical or metal-free approaches. In light of the significance of both mono- and dichalcogen-containing compounds in various fields of chemical science and the critical issue of chemoselectivity in organic synthesis, the present review systematically summarizes the advances in these research fields, with a special focus on elucidating scopes and mechanistic aspects. Moreover, the synthetic limitations, applications of some of these processes, the current challenges and our own perspectives on these highly active research fields are also discussed. Based on the substrate types and C-H bonds being chalcogenated, the present review is organized into four sections: (1) transition-metal-catalyzed/mediated chelation-assisted selective C-H mono-/dichalcogenation or exclusive dichalcogenation of (hetero)arenes; (2) directing group-free selective C-H mono-/dichalcogenation or exclusive dichalcogenation of electron-rich (hetero)arenes; (3) C(sp3)-H dichalcogenation; (4) dichalcogenation of both C(sp2)-H and C(sp3)-H bonds. We believe the present review will serve as an invaluable resource for future innovations and drug discovery.

Enzyme Engineering Renders Chlorinase the Activity of Fluorinase

Organofluorine compounds have attracted substantial attention owing to their wide application in agrochemistry. Fluorinase (FlA) is a unique enzyme in nature that can incorporate fluorine into an organic molecule. Chlorinase (SalL) has a similar mechanism as fluorinase and can use chloride but not fluoride as a substrate to generate 5'-chloro-deoxyadenosine (5'-ClDA) from S-adenosyl-l-methionine (SAM). Therefore, identifying the features that lead to this selectivity for halide ions is highly important. Here, we engineered SalL to gain the function of FlA. We found that residue Tyr70 plays a key role in this conversion through alanine scanning. Site-saturation mutagenesis experiments demonstrated that Y70A/C/S/T/G all exhibited obvious fluorinase activity. The G131S mutant of SalL, in which the previously thought crucial residue Ser158 for fluoride binding in FlA was introduced, did not exhibit fluorination activity. Compared with the Y70T single mutant, the double mutant Y70T/W129F increased 5'-fluoro-5-deoxyadenosine (5'-FDA) production by 76%. The quantum mechanics (QM)/molecular mechanics (MM) calculations suggested that the lower energy barriers and shorter nucleophilic distance from F- to SAM in the mutants than in the SalL wild-type may contribute to the activity. Therefore, our study not only renders SalL the activity of FlA but also sheds light on the enzyme selectivity between fluoride versus chloride.

Photocatalyzed Enantioselective Functionalization of C(sp3)-H Bonds

Owing to its diverse activation processes including single-electron transfer (SET) and hydrogen-atom transfer (HAT), visible-light photocatalysis has emerged as a sustainable and efficient platform for organic synthesis. These processes provide a powerful avenue for the direct functionalization of C(sp3)-H bonds under mild conditions. Over the past decade, there have been remarkable advances in the enantioselective functionalization of the C(sp3)-H bond via photocatalysis combined with conventional asymmetric catalysis. Herein, we summarize the advances in asymmetric C(sp3)-H functionalization involving visible-light photocatalysis and discuss two main pathways in this emerging field: (a) SET-driven carbocation intermediates are followed by stereospecific nucleophile attacks; and (b) photodriven alkyl radical intermediates are further enantioselectively captured by (i) chiral π-SOMOphile reagents, (ii) stereoselective transition-metal complexes, and (iii) another distinct stereoscopic radical species. We aim to summarize key advances in reaction design, catalyst development, and mechanistic understanding, to provide new insights into this rapidly evolving area of research.

Access to N-Difluoromethyl Amides, (Thio)Carbamates, Ureas, and Formamides

The first efficient access to N-difluoromethyl amides, carbamates, thiocarbamates, ureas, formamides, and their derivatives is reported herein. The synthetic strategy relies on the initial synthesis and straightforward derivatization of N-CF2H carbamoyl fluorides, which were prepared through a desulfurization-fluorination of thioformamides (─NH─C(H)═S) coupled with carbonylation. The newly made N-CF2H carbonyl compounds proved to be highly robust and compatible with numerous chemical transformations and downstream derivatizations, underscoring the potential of this novel motif as a building block in complex functional molecules.

Copper Loading-Controlled Selective Synthesis of 2,5-Bis(trifluoromethyl) and Monotrifluoromethyl-Substituted Oxazoles

A general domino annulation reaction of sulfonylmethyl isocyanide with trifluoroacetic anhydride in the presence of copper chloride as an additive is developed. The reaction affords 2,5-bis(trifluoromethyl)oxazoles in modest to good yields under mild conditions. A wide variety of sulfonylmethyl isocyanide and perfluorocarboxylic anhydride substrates are amenable to this transformation. Under a higher copper salt loading conditions, the reaction led to the formation of monotrifluoromethyl-substituted oxazole product.

Synthesis of Fluoromethylated Chromones and Their Heteroatom Analogues via Sodium Fluoromethanesulfinate-Enabled Direct Fluoromethylation

An array of biologically interesting tri/difluoromethylated chromones and their heteroatom analogues were conveniently synthesized from the reaction of chromones and their heteroatom analogues with CF3SO2Na or HCF2SO2Na in the presence of tert-butyl hydroperoxide under mild conditions. A mechanistic pathway involving the generation of the electrophilic tri/difluoromethyl radical, followed with the radical substitution of chromones and their heteroatom analogues, was postulated.

Late-Stage C-H Activation of Drug (Derivative) Molecules with Pd(ll) Catalysis

This review comprehensively analyses representative examples of Pd(II)-catalyzed late-stage C-H activation reactions and demonstrates their efficacy in converting C-H bonds at multiple positions within drug (derivative) molecules into diverse functional groups. These transformative reactions hold immense potential in medicinal chemistry, enabling the efficient and selective functionalization of specific sites within drug molecules, thereby enhancing their pharmacological activity and expanding the scope of potential drug candidates. Although notable articles have focused on late-stage C-H functionalization reactions of drug-like molecules using transition-metal catalysts, reviews specifically focusing on late-stage C-H functionalization reactions of drug (derivative) molecules using Pd(II) catalysts are required owing to their prominence as the most widely utilized metal catalysts for C-H activation and their ability to introduce a myriad of functional groups at specific C-H bonds. The utilization of Pd-catalyzed C-H activation methodologies demonstrates impressive success in introducing various functional groups, such as cyano (CN), fluorine (F), chlorine (Cl), aromatic rings, olefin, alkyl, alkyne, and hydroxyl groups, to drug (derivative) molecules with high regioselectivity and functional-group tolerance. These breakthroughs in late-stage C-H activation reactions serve as invaluable tools for drug discovery and development, thereby offering strategic options to optimize drug candidates and drive the exploration of innovative therapeutic solutions.

Photoinduced copper-catalyzed C-N coupling with trifluoromethylated arenes

Selective defluorinative functionalization of trifluoromethyl group (-CF3) is an attractive synthetic route to the pharmaceutically privileged fluorine-containing moiety. Herein, we report a strategy based on photoexcited copper catalysis to activate the C-F bond of di- or trifluoromethylated arenes for divergent radical C-N coupling with carbazoles and aromatic amines. The use of different ligands can tune the reaction products diversity. A range of substituted, structurally diverse α,α-difluoromethylamines can be obtained from trifluoromethylated arenes via defluorinative C-N coupling with carbazoles, while an interesting double defluorinative C-N coupling is ready for difluoromethylated arenes. Based on this success, a carbazole-centered PNP ligand is designed to be an optimal ligand, enabling a copper-catalyzed C-N coupling for the construction of imidoyl fluorides from aromatic amines through double C-F bond functionalization. Interestingly, a 1,2-difluoroalkylamination strategy of styrenes is also developed, delivering γ,γ-difluoroalkylamines, a bioisostere to β-aminoketones, in synthetically useful yields. The DFT studies reveal an inner-sphere electron transfer mechanism for Cu-catalyzed selective activation of C(sp3)-F bonds.

Recent advances on non-precious metal-catalysed fluorination, difluoromethylation, trifluoromethylation, and perfluoroalkylation of N-heteroarenes

This review highlights the recent advances, from 2015 to 2023, on the introduction of organo-fluorine derivatives at the N-heteroarene core. Notable features considering new technologies based on organofluorine compounds such as: (i) approaches based on non-precious metal catalysis (Fe, Co, Mn, Ni, etc.), (ii) the development of new strategies using non-precious metal-catalysts for the introduction of organo-fluorinine derivatives using N-heterocycles with one or more heteroatoms, (iii) newer reagents for fluorination, difluoromethylation, trifluoromethylation, or perfluoroalkylation of N-heteroarenes using different approaches, (iv) mechanistic studies on various catalytic transformations, as and when required, and (v) the synthetic applications of various bio-active organo-fluorine compounds, including post-synthetic drug derivatization, are discussed.

Cobalt-catalyzed decarboxylative difluoroalkylation of nitrophenylacetic acid salts

The selective installation of fluorine-containing groups into biologically relevant molecules has been used as a common strategy for the development of pharmaceutically active molecules. However, the selective incorporation of gem-difluoromethylene groups next to sterically demanding secondary and tertiary alkyl groups remains a challenge. Herein, we report the first cobalt-catalyzed regioselective difluoroalkylation of carboxylic acid salts. The reaction allows for the facile construction of various difluoroalkylated products in good yields tolerating a wide range of functionalities on either reaction partner. The potential of the method is illustrated by the late-stage functionalization of molecules of biological relevance. Mechanistic studies support the in situ formation of a cobalt(i) species and the intermediacy of difluoroalkyl radicals, thus suggesting a Co(i)/Co(ii)/Co(iii) catalytic cycle.

Synthetic Advantages of Defluorinative C-F Bond Functionalization

Much progress has been made in the development of methods to both create compounds that contain C-F bonds and to functionalize C-F bonds. As such, C-F bonds are becoming common and versatile synthetic functional handles. This review summarizes the advantages of defluorinative functionalization reactions for small molecule synthesis. The coverage is organized by the type of carbon framework the fluorine is attached to for mono- and polyfluorinated motifs. The main challenges, opportunities and advances of defluorinative functionalization are discussed for each class of organofluorine. Most of the text focuses on case studies that illustrate how defluorofunctionalization can improve routes to synthetic targets or how the properties of C-F bonds enable unique mechanisms and reactions. The broader goal is to showcase the opportunities for incorporating and exploiting C-F bonds in the design of synthetic routes, improvement of specific reactions and advent of new methods.

Visible-Light-Induced Cascade Cyclization of 1-Acryloyl-2-cyanoindole: Access of Difluoroalkylated Pyrrolo[1,2-a]indolediones

An effective method for accessing diverse difluoroalkylated pyrrolo[1,2-a]indolediones via visible-light-induced PhI(OAc)2-promoted cascade difluoroalkylation/cyclization reaction under mild conditions has been established. This method is noteworthy for its use of DMSO-H2O as a green medium at room temperature and avoidance of photocatalysts. The reactions are straightforward to execute and convenient to expand on, provide good to excellent yields, and have good functional group tolerance.

N-Heterocyclic Carbene and Manganese Synergistic Catalysis: A Three-Component Radical Acylmonofluoroalkylation of Alkenes

Despite the importance of monofluoroalkyl groups in pharmaceutically relevant molecules, catalytic protocols for their incorporation into alkenes remain limited. We describe herein a three-component acylmonofluoroalkylation of alkenes for the introduction of such moieties through an unprecedented cooperativity between the N-heterocyclic carbene catalyst and earth-abundant Mn(II) complex. This general method can be applied to a variety of alkenes, including styrenes, 1,3-enynes, and allenes, as well as complex substrates containing natural product and drug motifs.

Trifluoromethylated hydrazones and acylhydrazones as potent nitrogen-containing fluorinated building blocks

Nitrogen-containing organofluorine derivatives, which are prepared using fluorinated building blocks, are among the most important active fragments in various pharmaceutical and agrochemical products. This review focuses on the reactivity, synthesis, and applications of fluoromethylated hydrazones and acylhydrazones. It summarizes recent methodologies that have been used for the synthesis of various nitrogen-containing organofluorine compounds.

Advances in Continuous Flow Fluorination Reactions

Fluorination reactions are important in constructing organofluorine motifs, which contribute to favorable biological properties in pharmaceuticals and agrochemicals. However, fluorination reagents and reactions are associated with various problems, such as their hazardous nature, high exothermicity, and poor selectivity and scalability. Continuous flow has emerged as a transformative technology to provide many advantages relative to batch syntheses. This review article summarizes recent continuous flow techniques that address the limitations and challenges of fluorination reactions. Approaches based on different flow techniques are discussed, including gas-liquid reactions, packed-bed reactors, in-line purifications, streamlined multistep synthesis, large-scale reactions well as flow photoredox- and electrocatalysis.

Photocatalytic redox-neutral selective single C(sp3)-F bond activation of perfluoroalkyl iminosulfides with alkenes and water

Visible-light-promoted site-selective and direct C-F bond functionalization of polyfluorinated iminosulfides was accomplished with alkenes and water under redox-neutral conditions, affording a diverse array of γ-lactams with a fluoro- and perfluoroalkyl-substituted carbon centre. A variety of perfluoroalkyl units, including C2F5, C3F7, C4F9, and C5F11 underwent site-selective defluorofunctionalization. This protocol allows high chemoselectivity control and shows excellent functional group tolerance. Mechanistic studies reveal that the remarkable changes of the electron geometries during the defluorination widen the redox window between the substrates and the products and ensure the chemoselectivity of single C(sp3)-F bond cleavage.

Synthesis of Tertiary Fluorides through an Acid-Mediated Deoxyfluorination of Tertiary Alcohols

The combination of methanesulfonic acid and potassium bifluoride is reported for the deoxyfluorination of tertiary alcohols. Under metal-free conditions that use readily available, cheap, and easy-to-handle reagents, a range of tertiary alcohols could be converted into the corresponding fluorides in excellent yields (average yields of 85% for 23 examples). Mechanistic investigation showed that the reaction proceeds at 0 °C, in part, through an elimination/hydrofluorination pathway, but no residual alkenes are observed. The application of these conditions for the fluorination of ether and ester is also demonstrated.

Recent Advances of S-18F Radiochemistry for Positron Emission Tomography

The click chemistry of sulfur(VI) fluoride exchange (SuFEx) has facilitated the widespread application of sulfur-fluoride compounds such as sulfonyl fluorides, fluorosulfates, and sulfamoyl fluorides in various fields, especially in the development of 18F ligands for PET (positron emission tomography) imaging. In recent years, the prominent progress of sulfur-[18F]fluoride compounds has been achieved through the combination of 18F and sulfur-fluoride chemistry. These compounds serve as potential 18F tracers, 18F synthons, and reagents for 18F-fluorination, thereby complementing the range of 18F ligands, typically C-18F structures, used in PET studies. This review aims to provide an overview of S-18F labeling reactions through examples of relevant 18F compounds and highlight the advancements and breakthroughs achieved in the past decade.

Manganese/Cobalt Bimetallic Relay Catalysis for Divergent Dehydrogenative Difluoroalkylation of Alkenes

The involvement of manganese radical for halogen atom transfer (XAT) reactions has been esteemed as one reliable method but encountered with limited catalytic models. In this paper, a novel bimetallic relay catalysis of Mn2 (CO)10 and cobaloxime has been developed for divergent dehydrogenative difluoroalkylation of alkenes using commercially available difluoroalkyl bromides. A wide range of structurally diverse terminal, cyclic and internal alkenes as well as tetrasubstituted alkenes are found to be good coupling partners to deliver difluoroalkylated allylic products and difluoromethylated cyclic products, accompanied with the production of H2 as the by-product. This bimetallic relay strategy features broad substrate scope, mild reaction conditions and excellent functional group compatibility. Its success represents an important step-forward to expedite the construction of a rich library of difluoroalkylated products.

Photocatalyzed Hydroaminodifluoroalkylation of Alkenes

The synthesis of undescribed β-aminodifluoroethylsulfinates and their uses in the hydroaminodifluoroalkylation of alkenes is reported. This reaction is performed in the presence of a photocatalyst (4CzIPN, Ru complexes) and enables the direct incorporation of a β-difluoroamine moiety into vinylic aryls, unactivated alkenes, and electron-rich, or -deficient alkenes. The mechanism was studied, and the formation of a gem-difluoromethyl radical was observed after the selective oxidation of the sulfinate function.

Reductive Catalytic Difluorocarbene Transfer via Palladium Catalysis

A palladium-catalyzed reductive difluorocarbene transfer reaction that tames difluorocarbene to couple with two electrophiles has been developed, representing a new mode of difluorocarbene transfer reaction. The approach uses low-cost and bulk industrial chemical chlorodifluoromethane (ClCF2 H) as the difluorocarbene precursor. It produces a variety of difluoromethylated (hetero)arenes from widely available aryl halides/triflates and proton sources, featuring high functional group tolerance and synthetic convenience without preparing organometallic reagents. Experimental mechanistic studies reveal that an unexpected Pd0/II catalytic cycle is involved in this reductive reaction, wherein the oxidative addition of palladium(0) difluorocarbene ([Pd0 (Ln )]=CF2 ) with aryl electrophile to generate the key intermediate aryldifluoromethylpalladium [ArCF2 Pd(Ln )X], followed by reaction with hydroquinone, is responsible for the reductive difluorocarbene transfer.

Copper-Catalyzed Enantioselective Difluoromethylation-Alkynylation of Olefins by Solving the Dilemma between Acidities and Reduction Potentials of Difluoromethylating Agents

Molecules containing a difluoromethyl group or a propargylic stereocenter are widely used in pharmaceuticals and agrochemicals, and 1,2-functionalization of olefins is an important method for introducing the two groups into molecules simultaneously. The construction of the propargylic stereocenter with terminal alkynes usually requires bases. However, difluoromethylating agents with high reduction potentials often decompose in the presence of bases because of their acidities, and those with low reduction potentials are stable but difficult to undergo the desired single electron transfer (SET) reduction. Using the linear relationship between reduction potential differences (ΔE) and Hammett substituent constants (σ) of difluoromethyl aryl sulfones, we solved the dilemma between acidities and reduction potentials of difluoromethylating agents. Herein, we report the first enantioselective difluoromethylation-alkynylation of olefins with difluoromethyl 4-chlorophenyl sulfone with high enantioselectivity (>90 % ee). We also extended this asymmetric fluoroalkylation-alkynylation reaction with other fluoroalkyl sulfones, which enabled efficient installation of trifluoromethyl, difluoroalkyl, difluorobenzyl, (benzenesulfonyl)-difluoromethyl and monofluoromethyl groups into products.

A Strategic Synthesis of Fluoroethers via Ring-Opening Fluorinative Beckmann Fragmentation

An SN1-type fluorination method for monofluoroethers is developed. The key to this reaction is fluorinative C-C bond cleavage that is driven by oxygen-assisted Beckmann fragmentation. To enable this transformation, cyclic α-aryloxyoximes derived from 3-coumaranone and 1-indanones were investigated as substrates, using N,N-diethylaminosulfur trifluoride (DAST) as a dual-role reagent of an oxime activator and fluoride donor. This method features the synthesis of an underdeveloped chemical motif with simple and mild operating conditions.

Cross- and Multi-Coupling Reactions Using Monofluoroalkanes

Carbon-fluorine bonds are stable and have demonstrated sluggishness against various chemical manipulations. However, selective transformations of C-F bonds can be achieved by developing appropriate conditions as useful synthetic methods in organic chemistry. This review focuses on C-C bond formation at monofluorinated sp3 -hybridized carbons via C-F bond cleavage, including cross-coupling and multi-component coupling reactions. The C-F bond cleavage mechanisms on the sp3 -hybridized carbon centers can be primarily categorized into three types: Lewis acids promoted F atom elimination to generate carbocation intermediates; nucleophilic substitution with metal or carbon nucleophiles supported by the activation of C-F bonds by coordination of Lewis acids; and the cleavage of C-F bonds via a single electron transfer. The characteristic features of alkyl fluorides, in comparison with other (pseudo)halides as promising electrophilic coupling counterparts, are also discussed.

Fluoroalkyl Sulfoximines for Versatile Photocatalytic Radical Fluoroalkylations

Fluoroalkyl sulfoximines, which serve as electron-accepting fluoroalkyl radical sources, are easy-to-handle, solid, and bench-stable chemicals. Fluoroalkyl radicals can be generated from sulfoximine reagents using strong one-electron injectors, such as a highly reducing photoredox catalyst in the excited state. Our group has developed photocatalytic radical di- and mono-fluoromethylation and α-monofluoroalkylation of olefins with the corresponding fluoroalkyl sulfoximines. In this personal account, appropriate combinations of fluoroalkyl sulfoximines and photoredox catalysts, leading to successful radical fluoroalkylation, have been discussed.

Recent Advances in Visible Light-Mediated Radical Fluoro-alkylation, -alkoxylation, -alkylthiolation, -alkylselenolation, and -alkylamination

In the last few years, many reagents and protocols have been developed to allow for the efficient fluorofunctionalization of a diverse set of scaffolds ranging from alkanes, alkenes, alkynes, and (hetero)arenes. The concomitant rise of organofluorine chemistry and visible light-mediated synthesis have synergistically expanded the fields and have mutually benefitted from developments in both fields. In this context, visible light driven formations of radicals containing fluorine have been a major focus for the discovery of new bioactive compounds. This review details the recent advances and progress made in visible light-mediated fluoroalkylation and heteroatom centered radical generation.