Heavy allenes and cumulenes e=c=e' and e=c=c=e' (e = p, as, si, ge, sn; e' = C, N, p, as, o, s)

Reactivity of a Linear 2-Germapropadiene with Acids, Ketones, and Amines

The reactivity of an isolable 2-germapropadiene with acids, ketones, and amines was investigated. The reactions of 2-germapropagiene 1 with hydrogen chloride and acetic acid afforded the corresponding dichlorogermane (2) and diacetoxygermane (3), respectively, indicating that the central germanium atom of 1 is electrophilic. The reaction of 1 with benzaldehyde proceeds via a formal [2+2] cycloaddition to afford the corresponding spiro compound (4). Moreover, 1 reacts smoothly with acetone to furnish germane 5, which contains a six-membered ring involving two acetone molecules. Furthermore, 1 undergoes N-H bond insertion with methylamine or aniline to afford diamino germanes 7 and 8, respectively. The reaction of 1 with urea selectively afforded the corresponding N-H-insertion product (8).

The borylamino-diborata-allyl anion

Reactions of β-diketiminato alkaline earth alkyldiboranate derivatives [(BDI)Ae{pinBB(R)pin}] (BDI = HC{(Me)CNDipp}2; Dipp = 2,6-i-Pr2C6H3; Ae = Mg, R = n-Bu or Ae = Ca, R = n-hexyl) with t-BuNC provide access to the respective group 2 derivatives of unprecedented diborata-allyl, {(pinB)2CNBpin(t-Bu)}-, anions. Although the necessary mode of B-C bond cleavage implicated in these transformations could not be elucidated, further studies of the reactivity of magnesium triboranates toward isonitriles delivered a more general and rational synthetic access to analogous anionic moieties. Extending this latter reactivity to a less symmetric triboranate variant also provided an isomeric Mg-C-bonded dibora-alkyl species and sufficient experimental insight to prompt theoretical evaluation of this reactivity. DFT calculations, thus, support a reaction pathway predicated on initial RNC attack at a peripheral boron centre and the intermediacy of such dibora-alkyl intermediates.

Synthesis and reactivity of N-heterocyclic carbene (NHC)-supported heavier nitrile ylides

The synthesis and isolation of stable heavier analogues of nitrile ylide as N-heterocyclic carbene (NHC) adducts of phosphasilenyl-tetrylene [(NHC)(TerAr)Si(H)PE14(TerAr)] (E14 = Ge 1, Sn 2; TerAr = 2,6-Mes2C6H3, NHC = IMe4) are reported. The delocalized Si-P-E14 π-conjugation was examined experimentally and computationally. Interestingly, the germanium derivative 1 exhibits a 1,3-dipolar nature, leading to an unprecedented [3 + 2] cycloaddition with benzaldehyde, resulting in unique heterocycles containing four heteroatoms from group 14, 15, and 16. Further exploiting the nucleophilicity of germanium, activation of the P-P bond of P4 was achieved, leading to a [(NHC)(phosphasilenyl germapolyphide)] complex. Moreover, the [3 + 2] cycloaddition and the σ-bond activation by 1 resemble the characteristics of the classic nitrile ylide.

Organometallic Allene [(μ-C)(Fe(CO)4 )2 ]: Bridging Carbon Showing Transformation from Classical Electron-Sharing Bonding to Double σ-Donor and Double π-Acceptor Ligation

Allenes (R2 C=C=CR2 ) have been traditionally perceived to feature localized orthogonal π-bonds between the carbon centres. We have carried out quantum-mechanical studies of the organometallic allenes envisioned by the isolobal replacement of the terminal CH2 groups by the d8 Fe(CO)4 fragment. Our studies have identified two organometallic allenes viz. D2d symmetric [(μ-C)(Fe(CO)4 )2 ] (2) and D3 symmetric [(μ-C)(Fe(CO)4 )2 ] (3) with trigonal bipyramidal coordination at the Fe atoms. Compound 2 features the bridging carbon atom in an equatorial position with respect to the ligands on the TM centre, while 3 features the central carbon atom in an axial position. The bis-pseudoallylic anionic delocalisation proposed in the C2-C1-C3 spine of organic allene is retained in the organometallic allene 2, and is transformed to a typical three-centre bis-allylic anionic delocalisation in the organometallic allene 3. The topological analysis of electron density also indicates a bis-allylic anionic type delocalisation in the organometallic allenes. The quantitative bonding analysis using the EDA-NOCV method suggests a transition from classical electron-sharing bonding between the central carbon atom and the terminal groups in 1 to donor-acceptor bonding in 3. Meanwhile, both electron-sharing and donor-acceptor bonding models are found to be probable heuristic bonding representations in the organometallic allene 2.

Inorganometallic allenes [(Mn(η5-C5H5)(CO)2)2(μ-E)] (E = Si-Pb): bis-allylic anionic delocalisation similar to organometallic allene but differential σ-donation and π-backdonation

The chemistry of heavy group-14 tetrel atoms is known to diverge from that of the lighter congener carbon. Here, we report the structure and bonding in inorganometallic allenes [(MnCp(CO)2)2(μ-E)] (2E, E = Si-Pb; Cp = η5-C5H5). These inorganometallic allenes are structurally similar to the lighter organometallic analog [(MnCp(CO)2)2(μ-C)] (2C). The bonding analysis of these compounds at the M06/def2-TZVPP//BP86/def2-SVP level of theory identifies a linear Mn-E-Mn spine with delocalised, mutually orthogonal π-systems across this back-bone. This results in a bis-allylic anionic bonding scenario. However, the strength of the Mn-E bonding is found to be weaker in these inorganometallic allenes. The energy decomposition analysis at the BP86/TZ2P//BP86/def2-SVP level of theory further reveals that the bonding in these compounds cannot be represented by one unique heuristic bonding model, but multiple bonding models. For all 2E (E = C-Pb), the Dewar-Chatt-Duncanson bonding model is one of the best bonding representations, where the central tetrel atom acts as a 4e- σ-donor and 4e- π-acceptor. The bonding analysis indicates that the carbon atom in the organometallic allene acts as a better π-acceptor than σ-donor, while the heavier tetrel atoms in the inorganometallic allenes are better σ-donors than π-acceptors. The npz-orbital is found to be a better σ-donor than the valence ns-orbital. However, when the bonding representation is changed to a traditional electron-sharing model, the contribution from the ns-orbital was found to be the largest in comparison to the interaction from the remaining three valence np-orbitals. It can be suggested that the ns-orbitals contribute more towards chemical bonding when participating via an electron-sharing interaction than a donor-acceptor interaction.

Cyano(triphenylsilyl)phosphanide as a Building Block for P,C,N Conjugated Molecules

The cyano(triphenylsilyl)phosphanide anion was prepared as a sodium salt from 2-phosphaethynolate. The electronic structure of this new cyano(silyl)phosphanide was studied via computational methods and its reactivity investigated using various electrophiles and Lewis acids, demonstrating its P- and N-nucleophilicity. The ambident reactivity is in agreement with computations. The silyl group also shows lability and therefore the cyano(silyl)phosphanide can be considered as a phosphacyanamide synthon, [PCN]2- , and serves as building block for the transfer of a PCN moiety.

(NHC)Si═C═N-R: A Two-Coordinated Si0-Isocyanide Compound as Si(NHC) Transfer Reagent

Experimental and theoretical studies are reported of the first two-coordinated Si⁰-isocyanide compound (SIDipp)Si═C═N-Ar^Mes (1: SIDipp (NHC) = C[N(Dipp)CH₂]₂, Ar^Mes = 2,6-dimesitylphenyl), supported by an N-heterocyclic carbene (NHC). A Si atom economic two-step synthesis of 1 involves a 2e reduction of the isocyanide-stabilized silyliumylidene salt [SiBr(CNAr^Mes)(SIDipp)][B(Ar^F)₄] (2[B(Ar^F)₄], Ar^F = B(C₆H₃-3,5-(CF₃)₂)₄) with KC₈. 2[B(Ar^F)₄] was obtained from SiBr₂(SIDipp) after bromide abstraction with an equimolar mixture of Na[B(Ar^F)₄] and Ar^MesNC. Exact adherence to the stoichiometry is crucial in the latter reaction, since 2[B(Ar^F)₄] reacts with SiBr₂(SIDipp) via isocyanide exchange to afford the disilicon(II) salt [Si₂Br₃(SIDipp)₂)][B(Ar^F)₄] (3[B(Ar^F)₄]), the reaction leading to an equilibrium that favors 3[B(Ar^F)₄] (K_eq(298 K) = 10.6, ΔH° = -10.6 kJ mol^-1; ΔS^° = -16.0 J mol^-1 K^-1). 3[B(Ar^F)₄] was obtained selectively from the 2:1 reaction of SiBr₂(SIDipp) with Na[B(Ar^F)₄] and fully characterized. Detailed studies of 1 reveal an intriguing structure featuring a planar C_NHC-Si-C-N skeleton with a V-shaped geometry at the dicoordinated Si⁰ center, a slightly bent Si═C═N core, a C_NHC-Si-C_CNR 3c-2e out of plane π-bond (HOMO), and an anticlinal conformation of the SIDipp and Ar^Mes substituents leading to axial chirality and the presence of two enantiomers, (R_a)-1 and (S_a)-1. Compound 1 displays structural dynamics in solution, rapidly interconverting the enantiomers. The silacumulene 1 is a potent Si(SIDipp) transfer agent as demonstrated by the synthesis and full characterization of the NHC-supported germasilyne (Z)-(SIDipp)(Cl)Si═GeAr^Mes (4) from 1 and Ge(Ar^Mes)Cl.

Magnetic Modulation in Heteroallene and Heterocumulene Based tert-butyl Nitroxide Diradicals: Spin Delocalization and Conformation Play Crucial Roles

We have theoretically investigated the magnetic properties of heteroallene (>C=C=X-) and heterocumulene (>C=C=C=X-) based tert-butyl nitroxide diradicals (X is P/As). Calculation of magnetic exchange coupling constant (J) shows ferromagnetic interaction in heteroallene based diradicals. Whereas, in heterocumulene based diradicals, tuning of J value from antiferro- to ferro-magnetic state is observed from Z- to E- isomer. Delocalization of spin density from radical site to the coupler (in planar arrangement) is observed in spin distribution analysis which is also advocated by molecular orbital analysis. The typical feature of tert-butyl nitroxide radical creates spin delocalization along with spin polarization within the coupler. The J values of all the diradicals strongly depend on the dihedral angle between radical center and coupler. Magneto-structural correlation shows that the change in dihedral angle tunes the magnetic property for both the Z- and E- isomers of heterocumulenes depending on the spin accumulation on two nearby magnetic centers. The extent of spin delocalization and conformation of spin centers on the molecular axis are important for the different J values observed in our designed systems.

On 1,3-phosphaazaallenes and their diverse reactivity

1,3-Phosphaazaallenes are heteroallenes of the type RP Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> CNR′ and little is known about their reactivity. In here we describe the straightforward synthesis of ArPCNR (Ar = Mes*, 2,4,6-tBu-C₆H₂; ^MesTer, 2.6-(2,4,6-Me₃C₆H₂)–C₆H₃; ^DipTer, 2.6-(2,6-iPr₂C₆H₂)–C₆H₃; R = tBu; Xyl, 2,6-Me₂C₆H₃) starting from phospha-Wittig reagents ArPPMe₃ and isonitriles CNR. It is further shown that ArPCNtBu are thermally labile with respect to the loss of iso-butene and it is shown that the cyanophosphines ArP(H)CN are synthetically feasible and form the corresponding phosphanitrilium borates with B(C₆F₅)₃, whereas deprotonation of ^DipTerP(H)CN was shown to give an isolable cyanidophosphide. Lastly, the reactivity of ArPCNR towards Pier's borane was investigated, showing hydroboration of the CN bond in Mes*PCNtBu to give a hetero-butadiene, while with ^DipTerPCNXyl the formation of the Lewis acid–base adduct with a B–P linkage was observed.

The combination of phospha-Wittig reagents with isonitriles affords 1,3-phosphaazaallenes and their diverse reactivity has been studied in detail.

Adducts of the Parent Boraphosphaketene H2 BPCO and their Decarbonylative Insertion Chemistry

The first examples of Lewis base adducts of the parent boraphosphaketene (H2 B-PCO) and their cyclodimers are prepared. One of these adducts is shown to undergo mild decarbonylation and phosphinidene insertion into a B-C bond of a borole, forming very rare examples of 1,2-phosphaborinines, B/P isosteres of benzene. The strong donor properties of these 1,2-phosphaborinines are confirmed by the synthesis of their π complexes with the Group 6 metals.

Indirect Access to Carbene Adducts of Bismuth- and Antimony-Substituted Phosphaketene and Their Unusual Thermal Transformation to Dipnictines and [(NHC)2OCP][OCP]

The synthesis and thermal redox chemistry of the first antimony (Sb)– and bismuth (Bi)–phosphaketene adducts are described. When diphenylpnictogen chloride [Ph₂PnCl (Pn = Sb or Bi)] is reacted with sodium 2-phosphaethynolate [Na[OCP]·(dioxane)_x], tetraphenyldipnictogen (Ph₂Pn–PnPh₂) compounds are produced, and an insoluble precipitate forms from solution. In contrast, when the N-heterocyclic carbene adduct (NHC)–PnPh₂Cl is combined with [Na[OCP]·(dioxane)_x], Sb– and Bi–phosphaketene complexes are isolated. Thus, NHC serves as an essential mediator for the reaction. Immediately after the formation of an intermediary pnictogen–phosphaketene NHC adduct [NHC–PnPh₂(PCO)], the NHC ligand transfers from the Pn center to the phosphaketene carbon atom, forming NHC–C(O)P-PnPh₂ [Pn = Sb (3) or Bi (4)]. In the solid state, 3 and 4 are dimeric with short intermolecular Pn–Pn interactions. When compounds 3 and 4 are heated in THF at 90 and 70 °C, respectively, the pnictogen center Pn^III is thermally reduced to Pn^II to form tetraphenyldipnictines (Ph₂Pn–PnPh₂) and an unusual bis-carbene-supported OCP salt, [(NHC)₂OCP][OCP] (5). The formation of compound 5 and Ph₂Pn–PnPh₂ from 3 or 4 is unique in comparison to the known thermal reactivity for group 14 carbene–phosphaketene complexes, further highlighting the diverse reactivity of [OCP]⁻ with main-group elements. All new compounds have been fully characterized by single-crystal X-ray diffraction, multinuclear NMR spectroscopy (¹H, ¹³C, and ³¹P), infrared spectroscopy, and elemental analysis (1, 2, and 5). The electronic structure of 5 and the mechanism of formation were investigated using density functional theory (DFT).

An N-heterocyclic carbene (NHC) was used to support the otherwise unstable Ph₂Sb—P=C=O and Ph₂Bi—P=C=O moieties. Exploration of the thermal chemistry of these NHC−phosphaketene adducts reveals the formation of the salt [NHC₂OCP][OCP]. This present work demonstrates the thermal chemistry of the 2-phospaethynolate anion with heavier pnictogens (Sb and Bi).

New Reactivity Patterns in 3H‐Phosphaallene Chemistry [Aryl‐P=C=C(H)‐ t Bu]: Hydroboration of the C=C Bond, Deprotonation and Trimerisation

3H‐Phosphaallenes, R−P=C=C(H)C−R’ (3), are accessible in a multigram scale on a new and facile route and show a fascinating chemical reactivity. BH₃(SMe₂) and 3 a (R=Mes*, R’=tBu) afforded by hydroboration of the C=C bonds of two phosphaallene molecules an unprecedented borane (7) with the B atom bound to two P=C double bonds. This compound represents a new FLP based on a B and two P atoms. The increased Lewis acidity of the B atom led to a different reaction course upon treatment of 3 a with H₂B‐C₆F₅(SMe₂). Hydroboration of a C=C bond of a first phosphaallene is followed in a typical FLP reaction by the coordination of a second phosphaallene molecule via B−C and P−B bond formation to yield a BP₂C₂ heterocycle (8). Its B−P bond is short and the B‐bound P atom has a planar surrounding. Treatment of 3 a with tBuLi resulted in deprotonation of the β‐C atom of the phosphaallene (9). The Li atom is bound to the P atom as demonstrated by crystal structure determination, quantum chemical calculations and reactions with HCl, Cl‐SiMe₃ or Cl‐PtBu₂. The thermally unstable phosphaallene Ph−P=C=C(H)‐tBu gave a unique trimeric secondary product by P−P, P−C and C−C bond formation. It contains a P₂C₄ heterocycle and was isolated as a W(CO)₄ complex with two P atoms coordinated to W (15).

Aspects of Phosphaallene Chemistry: Heat-Induced Formation of 1,2-Dihydrophosphetes by Intramolecular Nucleophilic Aromatic Substitution and Photochemical Generation of Tricyclic Phosphiranes

3H-Phosphaallenes are accessible on a new and facile route and show a fascinating chemical behavior. The thermally induced rearrangement of Mes*P═C═C(H)R' (R' = tBu, Ad) afforded by C-H activation, isobutene elimination, and C-C and P-H bond formation bicyclic 1-benzo-dihydrophosphetes (2) with PC₃ heterocycles. DFT calculations suggest a mechanism with intramolecular nucleophilic aromatic substitution and replacement of an alkyl group by the nucleophilic α-C atom of the phosphaallene. These bicycles formed W(CO)₅ complexes (3) or afforded 1,2-dihydrophosphetes with P-bound alkenyl groups by catalyst-free hydrophosphination of alkynes (4 and 5). The resulting bulky phosphines formed complexes with IrCp*Cl₂, RuCl₂, AuCl, or CuO₃SCF₃. The Ru atom is coordinated by the P atom and a phenyl group. Irradiation of TripP═C═C(H)tBu led by the insertion of the central C atom of the P═C═C group into the α-C-H bond of an iPr substituent and by C-C and P-C bond formation to a new isomer of phosphaallenes, 10, which features a strained PC₂ heterocycle. It formed adducts with M(CO)₅ (M = Cr, Mo, W) and AuCl and reacted with SO₂Cl₂ by cleavage of one of the phosphirane P-C bonds to yield PC₄ or PC₅ heterocycles. Hydrolysis yielded a PC₅ compound with a P(O)Cl group.

B(C6 F5 )3 -Enabled Synthesis of a Cyclic cis-Arsaphosphene

The synthesis and characterization of an (arsino)phosphaketene, As(PCO){[N(Dipp)](CH₂ )}₂ (Dipp=2,6-diisopropylphenyl) is reported along with its subsequent reactivity with B(C₆ F₅ )₃ . When reacted in a stoichiometric ratio, B(C₆ F₅ )₃ drove the insertion of the P=C bond of the phosphaketene into one of the As-N bonds of the arsino functionality, affording an acid-stabilized, seven-membered, cyclic arsaphosphene. In contrast, when catalytic amounts of B(C₆ F₅ )₃ were employed, dimeric species, which formed through a formal [2+2] cycloaddition of the cyclic arsaphosphene, were generated. The cyclic arsaphosphene product represents the first example of such a compound in which the two substituents are arranged in a cis-configuration.

3H-Phosphaallenes Revisited: Facile Synthesis by Hydroalumination of Alkynylphosphines and β-Elimination, Stability and Trapping of Transient Species by Coordination to Transition Metal Atoms

A facile method for the efficient synthesis of 3H-phosphaallenes, R-P=C=C(H)-R', is presented, which comprises treatment of dialkynylphosphines with dialkylaluminium hydrides (hydroalumination) and elimination of aluminium alkynides from intermediate alkenyl-alkynylphosphines. The stability of the phosphaallenes depends on steric shielding by the substituents at phosphorus (aryl or CH(SiMe₃ )₂ groups). Only supermesityl compounds are persistent at room temperature in solution. This simple method starting with easily accessible dialkynylphosphines and commercially available aluminium hydrides (HAlEt₂ , HAliBu₂ ) allows the generation of transient species, which were trapped by coordination to transition metals. The η¹ -coordination via a P-W bond was observed for tungsten, while the side-on coordination via the P=C bond resulted with platinum. Decomposition of the mesityl derivative yielded an unprecedented product, which may be formed by 1,3-H shift to the P atom, hydrophosphination of the P=C bond of a second phosphaallene and formation of a P-P bond.

(Phosphanyl)phosphaketenes as building blocks for novel phosphorus heterocycles

Although BH₃ simply coordinates the endocyclic P of (phospholidino)phosphaketene 1^Dipp, the bulkier B(C₆F₅)₃ gives rise to a zwitterionic diphosphirenium, which is a novel type of 2π-electron aromatic system as shown by the calculated NICS values.

Although BH₃ simply coordinates the endocyclic P of (phospholidino)phosphaketene 1^Dipp, the bulkier B(C₆F₅)₃ gives rise to a zwitterionic diphosphirenium, which is a novel type of 2π-electron aromatic system as shown by the calculated NICS values. While the reaction of 1^Dipp with Na[PCO(dioxane)_x] is unselective, the same reaction with the sterically bulky (phospholidino)phosphaketene 1^Ar** [Ar** = 2,6-bis[di(4-tert-butylphenyl)methyl]-4-methylphenyl selectively affords a sodium bridged dimer containing a hitherto unknown λ³,λ⁵,λ³-triphosphete core. The latter formally results from “P^–” addition to a 1,3-P/C-dipole. Similarly, adamantyl isonitrile adds to 1^Dipp giving a 4-membered phosphacycle. In contrast to 1, the phosphaketene derived from the electrophilic diazaphospholidine-4,5-dione is unstable and reacts with a second molecule of Na[PCO(dioxane)_x] to afford a 1,3,4-oxadiphospholonide derivative.

Bonding analysis of ylidone complexes EL2 (E = C–Pb) with phosphine and carbene ligands L

Quantum chemical calculations using DFT and ab initio methods have been carried out of the compounds EL2 with atoms E = C–Pb and the ligands L = PPh3, N-heterocyclic carbene (NHC), bicyclic NHC, and cyclic alkyl-amino carbene (cAAC). The equilibrium structures are reported and the bonding situation was analyzed with a variety of charge- and energy decomposition methods. Some of the molecules are experimentally known, but most molecules have not yet been prepared. The bonding analysis suggests that all but one molecule should be considered as ylidones that possess dative bonds L→E←L. The sole exception is C(cAAC)2, which has a linear structure and classical double bonds (cAAC)=C=(cAAC). The ylidones EL2 have two lone-pair orbitals at atom E with σ and π symmetry. The π lone pair is somewhat delocalized due to L←E→L π-backdonation. The contribution of L←E→L π-backdonation relative to L→E←L σ-donation increases for the heavier elements. The compounds have rather large first and second proton affinities, which is a characteristic feature of ylidones. They are thus double Lewis bases that could be utilized in chemical reactions.

The reactivity of acyl chlorides towards sodium phosphaethynolate, Na(OCP): a mechanistic case study

The reaction of Na(OCP) with mesitoyl chloride delivers an ester functionalized 1,2,4-oxadiphosphole in a clean and P-atom economic way. The reaction mechanism has been elucidated by means of detailed NMR-spectroscopic, kinetic and computational studies. The initially formed acyl phosphaketene undergoes a pseudo-coarctate cyclization with an (OCP)- anion under the loss of carbon monoxide to yield a five-membered ring anion. Subsequently, the nucleophilic attack of the formed heterocyclic anion on a second acyl chloride molecule results in the 1,2,4-oxadiphosphole. The transient acyl phosphaketene is conserved during the reaction in the form of four-membered ring adducts, which act as a reservoir. Consequently, the phosphaethynolate anion has three different functions in these reactions: it acts as a nucleophile, as an en-component in [2 + 2] cycloadditions and as a formal P- transfer reagent.

Stepwise Formation of a 1,3-Butadiene Analogue of Mixed Heavier Group 15 Elements

The reaction of the phosphinidene complex [Cp*P{W(CO)5}2] (1 a) with di-tert-butylcarboimidophosphene leads to the P-C cage compound 6 and the Lewis acid-base adduct [Cp*P{W(CO)5}2(CNtBu)] (2 a). In contrast, the arsinidene complex shows a different reactivity. At low temperatures, the arsaphosphene complex [{W(CO)5}{η(2)-(Cp*)As=P(tBu)}{W(CO)5}] (3) is formed. At these temperatures, 3 reacts further with a second equivalent of carboimidophosphene to form [{W(CO)5}{η(2)-{(Cp*)(tBu)P}As=P(tBu)}{W(CO)5}] (5), probably by the insertion of a phosphinidene unit (tBuP) into an As-C bond. In contrast, at room temperature 3 reacts further by a radical-type reaction to form [{(tBu)P=As-As=P(tBu)}{W(CO)5}4] (4). Compound 4 is the first example of a neutral, 1,3-butadiene analogue containing only mixed heavier Group 15 elements. It consists of two P=As double bonds connected by arsenic atoms.

Hydroalumination of alkynyl-aminophosphines as a promising tool for the synthesis of unusual phosphines: P–N bond activation, a transient phosphaallene, a zwitterionic AlP2C2heterocycle and a masked Al/P-based frustrated Lewis pair

Hydroalumination of alkynyl-aminophosphines afforded an AlP₂C₂heterocycleviaP–N bond activation and a transient phosphaallene.

Microwave-assisted C–N and C–S bond-forming reactions: an efficient three-component domino sequence for the synthesis of sulfoether-decorated imidazo[1,2-a]pyridines

Microwave-assisted three-component domino reaction for the synthesis of sulfoether-decorated imidazo[1,2-a]pyridines.

Alkynyl functionalized Al/P-based frustrated Lewis pairs – aluminium alkynide elimination and evidence for the formation of 3H-phosphaallenes [R-PCC(H)-tBu]

Hydroalumination of dialkynylphosphines by H-Al[CH(SiMe₃)₂]₂afforded alkenyl–alkynyl phosphines which eliminate dialkylaluminium alkynides spontaneously to form phosphaallenes, aryl-PCC(H)-^tBu.

Acyclic germylones: congeners of allenes with a central germanium atom

The cyclic alkyl(amino) carbene (cAAC:)-stabilized acyclic germylones (Me2-cAAC:)2Ge (1) and (Cy2-cAAC:)2Ge (2) were prepared utilizing a one-pot synthesis of GeCl2(dioxane), cAAC:, and KC8 in a 1:2:2.1 molar ratio. Dark green crystals of compounds 1 and 2 were produced in 75 and 70% yields, respectively. The reported methods for the preparation of the corresponding silicon compounds turned out to be not applicable in the case of germanium. The single-crystal X-ray structures of 1 and 2 feature the C-Ge-C bent backbone, which possesses a three-center two-electron π-bond system. Compounds 1 and 2 are the first acyclic germylones containing each one germanium atom and two cAAC: molecules. EPR measurements on compounds 1 and 2 confirmed the singlet spin ground state. DFT calculations on 1/2 revealed that the singlet ground state is more stable by ~16 to 18 kcal mol(-1) than that of the triplet state. First and second proton affinity values were theoretically calculated to be of 265.8 (1)/267.1 (2) and 180.4 (1)/183.8 (2) kcal mol(-1), respectively. Further calculations, which were performed at different levels suggest a singlet diradicaloid character of 1 and 2. The TD-DFT calculations exhibit an absorption band at ~655 nm in n-hexane solution that originates from the diradicaloid character of germylones 1 and 2.