Rational Design of High-Performance DeNOx Catalysts Based on MnxCo3–xO4 Nanocages Derived from Metal–Organic Frameworks

Performance and Mechanism of Co and Mn Loaded on Fe-Metal-Organic Framework Catalysts with Different Morphologies for Simultaneous Degradation of Acetone and NO by Photothermal Coupling

VOCs can be used instead of ammonia as a reducing agent to remove NO, achieving the effect of removing VOCs and NO simultaneously. Due to the high energy consumption and low photocatalytic efficiency required for conventional thermocatalytic purification, photothermal coupled catalytic purification can integrate the advantages of photocatalysis and thermocatalysis in order to achieve the effect of pollutants being treated efficiently with a low energy consumption. In this study, samples loaded with Co and Mn catalysts were prepared using the hydrothermal method on Fe-MOF with various morphologies. The catalytic performance of each catalyst was analyzed by studying the effects of their physicochemical properties through various characterizations, including XRD, SEM, BET, XPS, H2-TPR, TEM and O2-TPD. The characterization results demonstrated that the specific surface area, pore volume, high valence Co and Mn atoms, surface adsorbed oxygen and the abundance of oxygen lattice defects in the catalysts were the most critical factors affecting the performance of the catalysts. Based on the results of the performance tests, the catalysts prepared with an octahedral-shaped Fe-MOF loaded with Co and Mn showed a better performance than those loaded with Co and Mn on a rod-shaped Fe-MOF. The conversions of acetone and NO reached 50% and 64%, respectively, at 240 °C. The results showed that the catalysts were capable of removing acetone and NO at the same time. Compared with the pure Fe-MOF without Co and Mn, the loaded catalysts showed a significantly higher ability to remove acetone and NO simultaneously under the combination of various factors. The key reaction steps for the catalytic conversion of acetone and NO on the catalyst surface were investigated according to the Mars-van Krevelen (MvK) mechanism, and a possible mechanism was proposed. This study presents a new idea for the simultaneous removal of acetone and NOx by photothermal coupling.

IrSn Bimetallic Clusters Confined in MFI Zeolites for CO Selective Catalytic Reduction of NOx in the Presence of Excess O2

We developed a simple strategy for preparing IrSn bimetallic clusters encapsulated in pure silicon zeolites via a one-pot hydrothermal synthesis by using diethylamine as a stabilizing agent. A series of investigations verified that metal species have been confined successfully in the inner of MFI zeolites. IrSn bimetallic cluster catalysts were efficient for the CO selective catalytic reduction of NOx in the presence of excess O2. Furthermore, the 13CO temperature-programmed surface reaction results demonstrated that NO2 and N2O could form when most of the CO was transformed into CO2 and that Sn modification could passivate CO oxidation on the IrSn bimetallic clusters, leading to more reductants that could be used for NOx reduction at high temperatures. Furthermore, SO2 can also influence the NOx conversion by inhibiting the oxidation of CO. This study provides a new strategy for preparing efficient environmental catalysts with a high dispersion of metal species.

A Low-Noble-Metal Ru@CoMn2O4 Spinel Catalyst for the Efficient Oxidation of Propane

Noble metals have become a research hotspot for the oxidation of light alkanes due to their low ignition temperature and easy activation of C-H; however, sintering and a high price limit their industrial applications. The preparation of effective and low-noble-metal catalysts still presents profound challenges. Herein, we describe how a Ru@CoMn2O4 spinel catalyst was synthesized via Ru in situ doping to promote the activity of propane oxidation. Ru@CoMn2O4 exhibited much higher catalytic activity than CoMn2O4, achieving 90% propane conversion at 217 °C. H2-TPR, O2-TPD, and XPS were used to evaluate the catalyst adsorption/lattice oxygen activity and the adsorption and catalytic oxidation capacity of propane. It could be concluded that Ru promoted synergistic interactions between cobalt and manganese, leading to electron transfer from the highly electronegative Ru to Co2+ and Mn3+. Compared with CoMn2O4, 0.1% Ru@CoMn2O4, with a higher quantity of lattice oxygen and oxygen mobility, possessed a stronger capability of reducibility, which was the main reason for the significant increase in the activity of Ru@CoMn2O4. In addition, intermediates of the reaction between adsorbed propane and lattice oxygen on the catalyst were monitored by in situ DRIFTS. This work highlights a new strategy for the design of a low-noble-metal catalyst for the efficient oxidation of propane.

Regulating electron transfer and orbital interaction within metalloporphyrin-MOFs for highly sensitive NO2 sensing

The understanding of electron transfer pathways and orbital interactions between analytes and adsorption sites in gas-sensitive studies, especially at the atomic level, is currently limited. Herein, we have designed eight isoreticular catechol-metalloporphyrin scaffolds, FeTCP-M and InTCP-M (TCP = 5,10,15,20-tetrakis-catechol-porphyrin, M = Fe, Co, Ni and Zn) with adjustable charge transfer schemes in the coordination microenvironment and precise tuning of orbital interactions between analytes and adsorption sites, which can be used as models for exploring the influence of these factors on gas sensing. Our experimental findings indicate that the sensitivity and selectivity can be modulated using the type of metals in the metal-catechol chains (which regulate the electron transfer routes) and the metalloporphyrin rings (which fine-tune the orbital interactions between analytes and adsorption sites). Among the isostructures, InTCP-Co demonstrates the highest response and selectivity to NO2 under visible light irradiation, which could be attributed to the more favorable transfer pathway of charge carriers in the coordination microenvironment under visible light illumination, as well as the better electron spin state compatibility, higher orbital overlap and orbital symmetry matching between the N-2s2pz hybrid orbital of NO2 and the Co-3dz2 orbital of InTCP-Co.

Cobalt vacancy-originated TiMnCoCN compounds with a self-adjusting ability for the high-efficiency acidic oxygen evolution reaction

Oxygen evolution reaction (OER) electrocatalysts in acidic media, except for precious IrO2, have difficulty realizing good electrocatalytic activity and high electrochemical stability simultaneously. However, the scarcity of IrO2 as an acidic OER electrocatalyst impedes its large-scale application in hydrogen generation, organic synthesis, nonferrous metal production and sewage disposal. Herein, we report the design and fabrication of a nanoporous TiMnCoCN compound based on the nanoscale Kirkendall effect, possessing an intriguing self-adjusting capability for the oxygen evolution reaction (OER) in a 0.5 M H2SO4 solution. The nanoporous TiMnCoCN compound electrode for the acidic OER displays a low overpotential of 143 mV for 10 mA cm-2 and exhibits no increase in potential over 50,000 s, which is ascribed to the self-adjusting ability, Carbon/nitrogen (C/N) incorporation and nanoporous architecture. The concentration of inert TiO2 on the reconstructed surface of the compound can self-adjust with the change in OER potential via a cobalt-dissolved vacancy approach according to the stabilization requirement. In this work, the self-reconstruction law of surface structure was discovered, providing a novel strategy for designing and fabricating nonnoble OER electrocatalysts with superior catalytic performance and robust stability in acidic media.

Constructed electron-dense Mn sites in nitrogen-doped Mn3O4 for efficient catalytic ozonation of pyrazines: Degradation and odor elimination

In this study, N-doped Mn3O4 catalysts (Mn-nN) with electron-dense Mn sites were synthesized and employed in heterogeneous catalytic ozonation (HCO). These catalysts demonstrated excellent performance in pyrazines degradation and odor elimination. The synthesis of Mn-nN was achieved through a facile urea-assisted heat treatment method. Experimental characterization and theoretical analyses revealed that the MnN structures in Mn-nN, played a crucial role in facilitating the formation of electron-dense Mn sites that served as the primary active sites for ozone activation. In particular, Mn-1N exhibited excellent performance in the HCO system, demonstrating the highest 2,5-dimethylpyrazine (2,5-DMP) degradation efficiency. •OH was confirmed as the primary reactive oxygen species involved in the HCO process. The second-order rate constants for 2,5-DMP degradation with O3 and •OH, were determined to be (3.75 ± 0.018) × 10-1 and (6.29 ± 0.844) × 109 M-1 s-1, respectively. Seventeen intermediates were identified through GC-MS analysis during the degradation of 2,5-DMP via HCO process with Mn-1N. The degradation pathways were subsequently proposed by considering these identified intermediates. This study introduces a novel approach to synthesize N-doped Mn3O4 catalysts and demonstrates their efficacy in HCO for the degradation of pyrazines and the elimination of associated odors. The results show that the catalysts are promising for addressing odor-related environmental issues and provide valuable insights about the broader significance of catalytic ozonation processes.

Investigation of manganese-iron oxide nanocomposite immobilized on powdered activated carbon as an efficient activator of peroxymonosulfate for antibiotics degradation: Conjunction of adsorption, radical and nonradical processes

Peroxymonosulfate (PMS)-based advanced oxidation processes (AOPs) have gained considerable attention for their efficient oxidation of persistent pollutants. A two-step chemical co-precipitation method was used to prepare a bimetallic nanocomposite (MnOx@Fe3O4) consisting of manganese oxides and ferroferric oxides, supported by powdered activated carbon (PAC). The synthesis of MnOx@Fe3O4-PAC (MFP) was aimed to enhance the degradation efficiency of oxytetracycline (OTC) via the simultaneous adsorption and oxidation processes on the solid-liquid interface. The OTC degradation process in the MFP/PMS system could be well described by pseudo-first-order kinetics. A wide pH range (3-6) was acceptable for MFP to degrade OTC via PMS activation with the highest removal efficiency reaching up to 85.6% (OTC0 = 150 mg/L), while a 60.8% removal efficiency of total organic carbon (TOC) was also attained simultaneously. SO4•- and 1O2, which were bound to the surface, played a crucial role as reactive oxygen species in the degradation of OTC. The combination of PAC, Fe3O4, and MnOx of MFP could enhance the degradation efficiency of OTC and fetch up their defects of separate application. The deduced OTC degradation pathway relied on the findings from UPLC-MS analysis and density functional theory (DFT) calculations. Noteworthy, MFP maintained efficient catalysis performance in the five cycles of stability experiment with neglectable loss of manganese and iron. These results provide valuable understanding of the conjunction of adsorption, radical, and nonradical processes driven by MFP for OTC degradation.

Concave Ni(OH)2 Nanocube Synthesis and Its Application in High-Performance Hybrid Capacitors

The controlled synthesis of hollow structure transition metal compounds has long been a very interesting and significant research topic in the energy storage and conversion fields. Herein, an ultrasound-assisted chemical etching strategy is proposed for fabricating concave Ni(OH)2 nanocubes. The morphology and composition evolution of the concave Ni(OH)2 nanocubes suggest a possible formation mechanism. The as-synthesized Ni(OH)2 nanostructures used as supercapacitor electrode materials exhibit high specific capacitance (1624 F g-1 at 2 A g-1) and excellent cycling stability (77% retention after 4000 cycles) due to their large specific surface area and open pathway. In addition, the corresponding hybrid capacitor (Ni(OH)2//graphene) demonstrates high energy density (42.9 Wh kg-1 at a power density of 800 W kg-1) and long cycle life (78% retention after 4000 cycles at 5 A g-1). This work offers a simple and economic approach for obtaining concave Ni(OH)2 nanocubes for energy storage and conversion.

Principles of Design and Synthesis of Metal Derivatives from MOFs

Materials derived from metal-organic frameworks (MOFs) have demonstrated exceptional structural variety and complexity and can be synthesized using low-cost scalable methods. Although the inherent instability and low electrical conductivity of MOFs are largely responsible for their low uptake for catalysis and energy storage, a superior alternative is MOF-derived metal-based derivatives (MDs) as these can retain the complex nanostructures of MOFs while exhibiting stability and electrical conductivities of several orders of magnitude higher. The present work comprehensively reviews MDs in terms of synthesis and their nanostructural design, including oxides, sulfides, phosphides, nitrides, carbides, transition metals, and other minor species. The focal point of the approach is the identification and rationalization of the design parameters that lead to the generation of optimal compositions, structures, nanostructures, and resultant performance parameters. The aim of this approach is to provide an inclusive platform for the strategies to design and process these materials for specific applications. This work is complemented by detailed figures that both summarize the design and processing approaches that have been reported and indicate potential trajectories for development. The work is also supported by comprehensive and up-to-date tabular coverage of the reported studies.

Recent advances in core-shell structured catalysts for low-temperature NH3-SCR of NOx

Ammonia selective catalytic reduction (NH₃-SCR) of nitrogen oxides is an effective and well-established technology for NO_x removal, but current commercial denitrification catalysts based on V₂O₅-WO₃/TiO₂ have some obvious disadvantages, including narrow operating temperature windows, toxicity, poor hydrothermal stability, and unsatisfied SO₂/H₂O tolerance. To overcome these drawbacks, it is imperative to investigate new types of highly efficient catalysts. In order to design catalysts with outstanding selectivity, activity, and anti-poisoning ability, core-shell structured materials have been widely applied in the NH₃-SCR reaction, which exhibits numerous advantages including the large surface area, the strong synergy interaction of core-shell materials, the confinement effect, and the shielding effect from the shell layer to protect the core. This review summarizes recent developments of core-shell structured catalysts for NH₃-SCR, including basic classification, synthesis methods, and a detailed description of the performance and mechanisms of each type of catalyst. It is hoped that the review will stimulate future developments in NH₃-SCR technology, leading to novel catalyst designs with improved denitrification performance.

Effect of Cu-Doped Co-Mn Spinel for Boosting Low-Temperature NO Reduction by CO: Exploring the Structural Properties, Performance, and Mechanisms

Cobalt-manganese spinel catalysts performed unsatisfactory activity at low-temperature and narrow reaction temperature window, which greatly limited the application in NO reduction by CO. Herein, we synthesize a series of Cu-doped CoMn₂O₄ catalysts and apply to NO reduction by CO. The Cu_0.3Co_0.7Mn₂O₄ exhibited superior catalytic performance, reaching 100% NO conversion and 80% N₂ selectivity at 250 °C. Detailed structural analysis showed that the introduced Cu replaces some Co in tetrahedral coordination to induce a strong synergistic effect between different metals. This endows the catalyst with the promotion of both electron transfer and oxygen vacancy generation on the catalyst surface. Importantly, the reaction mechanism and pathway were further revealed by in situ diffusion Fourier transform infrared spectroscopy (DRIFTS) and density functional theory (DFT) calculations. The results indicated that the cycle of oxygen vacancy mainly determines the catalytic activity of NO reduction by CO. Notably, Cu doping significantly lowered the energy barrier of the rate-determining step (*CO + O → *O_v + CO₂), facilitating the desorption of the CO₂ and exposing the active sites for efficient NO reduction with CO. This work offers an effective way for designing the catalyst in NO reduction by CO and provides a reference for exploring the catalytic mechanism of the reaction.

The Resistance of SO2 and H2O of Mn-Based Catalysts for NO x Selective Catalytic Reduction with Ammonia: Recent Advances and Perspectives

The treatment of NO _x has become an urgent issue due to it being difficult to degrade in air and its tremendous adverse impact on public health. Among numerous NO _x emission control technologies, the technology of selective catalytic reduction (SCR) using ammonia (NH₃) as the reducing agent (NH₃-SCR) is regarded as the most effective and promising technique. However, the development and application of high-efficiency catalysts is severely limited due to the poisoning and deactivation effect by SO₂ and H₂O vapor in the low-temperature NH₃-SCR technology. In this review, recent advances in the catalytic effects from increasing the rate of the activity in low-temperature NH₃-SCR by manganese-based catalysts and the stability of resistance to H₂O and SO₂ during catalytic denitration are reviewed. In addition, the denitration reaction mechanism, metal modification, preparation methods, and structures of the catalyst are highlighted, and the challenges and potential solutions for the design of a catalytic system for degenerating NO _x over Mn-based catalysts with high resistance of SO₂ and H₂O are discussed in detail.

Non-enzymatic disposable electrochemical sensors based on CuO/Co3O4@MWCNTs nanocomposite modified screen-printed electrode for the direct determination of urea

A new electrochemical impedimetric sensor for direct detection of urea was designed and fabricated using nanostructured screen-printed electrodes (SPEs) modified with CuO/Co₃O₄ @MWCNTs. A facile and simple hydrothermal method was achieved for the chemical synthesis of the CuO/Co₃O₄ nanocomposite followed by the integration of MWCNTs to be the final platform of the urea sensor. A full physical and chemical characterization for the prepared nanomaterials were performed including Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), contact angle, scanning electron microscope (SEM) and transmission electron microscopy (TEM). Additionally, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to study the electrochemical properties the modified electrodes with the nanomaterials at different composition ratios of the CuO/Co₃O₄ or MWCNTs. The impedimetric measurements were optimized to reach a picomolar sensitivity and high selectivity for urea detection. From the calibration curve, the linear concentration range of 10^-12-10^-2 M was obtained with the regression coefficient (R²) of 0.9961 and lower detection limit of 0.223 pM (S/N = 5). The proposed sensor has been used for urea analysis in real samples. Thus, the newly developed non-enzymatic sensor represents a considerable advancement in the field for urea detection, owing to the simplicity, portability, and low cost-sensor fabrication.

Exceptionally high and reversible NOx uptake by hollow Mn-Fe composite nanocubes derived from Prussian blue analogues

Noble metal-based catalysts are widely used as passive NO_x adsorbers (PNA) for cold-start NO_x emissions; however, efficient porous materials as an alternative have great development potential. Herein, porous Mn-Fe composites with hollow nanocubes derived from Prussian blue analogue (PBA) precursors were used as PNA. The effects of O₂, the molar ratio of Mn/Fe, calcination temperature and reaction temperature on their adsorption capacity were explored. The physicochemical properties of the obtained catalysts were systematically characterized by XRD, SEM, BET surface area, TGA, XPS and DRIFT techniques. The developed Mn₁Fe₂-450 presented excellent NO_x uptake (more than 2.16 mmol g^-1 at 200 °C). Moreover, a high NO_x adsorption performance was also retained in the presence of 10% water vapor. The existing Mn³⁺ and Fe²⁺ species could contribute to the NO_x adsorption and gaseous O₂ can accelerate NO activation to form more easily adsorbed NO₂. Surface NO₂ is further diffused and stored into the bulk of the Mn-Fe composite in the form of nitrite and nitrate. This work revealed a novel candidate for PNA catalysts, which might provide inspiration for the design of new adsorbent materials.

Phosphotungstic Acid-Modified MnOx for Selective Catalytic Reduction of NOx with NH3

H3PW12O40-modified MnOx catalysts (denoted as Mn-HPW) were used for NOx elimination with co-fed NH3. The optimal Mn-HPW0.02 catalyst exhibited over 90% NOx conversion at 90–270 °C. The incorporation of HPW increased the amount of Lewis acid sites of the catalyst for adsorbing NH3, and accelerated the reaction between the adsorbed NH3 species and gas-phase NOx, thus, increasing the low-temperature catalytic activity. The oxidation ability of the Mn catalyst was decreased due to the addition of HPW, thus, mitigating the overoxidation of the adsorbed NH3 species and improving the de-NOx activity and N2 selectivity in the high-temperature region. DRIFT results revealed that the NH3 species on Lewis and Brønsted acid sites, bridged nitrate, and bidentate nitrate were important species/intermediates for the reaction. NH3-SCR over the Mn and Mn-HPW0.02 catalysts obeyed the Eley–Rideal and Langmuir–Hinshelwood mechanisms, simultaneously, at 120 °C.

The promoting/inhibiting effect of water vapor on the selective catalytic reduction of NOx

In the field of nitrogen oxides (NO_x) abatement, developing selective catalytic reduction (SCR) catalysts that can operate stably in the practical conditions remains a big challenge because of the complexity and uncertainty of actual flue gas emissions. As water vapor is unavoidable in the actual flue gas, it is indispensable to explore its effect on the performance of SCR catalysts. Many studies have proved that the effects of H₂O on de-NO_x activity of SCR catalysts were indeed observed during SCR reactions operated under wet conditions. Whether the effect is promotive or inhibitory depends on the reaction conditions, catalyst types and reducing agents used in SCR reaction. This review focuses on the effect of H₂O on SCR catalysts and SCR reaction, including promoting effect, inhibiting effect, as well as the effecting mechanism. Besides, various strategies for developing a water-resistant SCR catalyst are also included. We hope that this work can give a more comprehensive insight into the effects of H₂O on SCR catalysts and help with the rational design of water-resistant SCR catalysts for further practical application in NO_x abatement field.

Nanoparticles of Mixed-Valence Oxides MnXCO3-XO4 (0 ≤ X ≤ 1) Obtained with Agar-Agar from Red Algae (Rhodophyta) for Oxygen Evolution Reaction

The development of efficient electrocatalysts for the oxygen evolution reaction (OER) is of paramount importance in sustainable water-splitting technology for hydrogen production. In this context, this work reports mixed-valence oxide samples of the Mn_XCo_3-XO₄ type (0 ≤ X ≤ 1) synthesized for the first time by the proteic sol-gel method using Agar-Agar as a polymerizing agent. The powders were calcined at 1173 K, characterized by FESEM, XRD, RAMAN, UV-Vis, FT-IR, VSM, and XPS analyses, and were investigated as electrocatalysts for the oxygen evolution reaction (OER). Through XRD analysis, it was observed that the pure cubic phase was obtained for all samples. The presence of Co³⁺, Co²⁺, Mn²⁺, Mn³⁺, and Mn⁴⁺ was confirmed by X-ray spectroscopy (XPS). Regarding the magnetic measurements, a paramagnetic behavior at 300 K was observed for all samples. As far as OER is concerned, it was investigated in an alkaline medium, where the best overpotential of 299 mV vs. RHE was observed for the sample (MnCo₂O₄), which is a lower value than those of noble metal electrocatalysts in the literature, together with a Tafel slope of 52 mV dec^-1, and excellent electrochemical stability for 15 h. Therefore, the green synthesis method presented in this work showed great potential for obtaining electrocatalysts used in the oxygen evolution reaction for water splitting.

An overview of the deactivation mechanism and modification methods of the SCR catalysts for denitration from marine engine exhaust

Selective catalytic reduction (SCR) technology is currently the most effective deNO_x technology and has broad application prospects. Moreover, there is a large NO_x content in marine engine exhaust. However, the marine engine SCR catalyst will be affected by heavy metals, SO₂, H₂O_(g), hydrocarbons (HC) and particulate matter (PM) in the exhaust, which will hinder the removal of NO_x via SCR. Furthermore, due to the high loading operation of the marine engine and the regeneration of the diesel particulate filter (DPF), the exhaust temperature of the engine may exceed 600 °C, which leads to sintering of the SCR catalysts. Therefore, the development of new catalysts with good tolerances to the above emissions and process parameters is of great significance for further reducing NO_x from marine engines. In this work, we first elaborate on the mechanism of the SCR catalyst poisoning caused by marine engine emissions, as well as the working mechanism of SCR catalysts affected by the engine exhaust temperature. Second, we also summarize the current technologies for improving the properties of SCR catalysts with the aim of enhancing the resistance and stability under complex working conditions. Finally, the challenges and perspectives associated with the performance optimization and technology popularization of marine SCR systems are discussed and proposed further. Consequently, this review may provide a valuable reference and inspiration for the development of catalysts and improvement in the denitration ability of SCR systems matched with marine engines.

Effect of Bimetal Element Doping on the Low-Temperature Activity of Manganese-Based Catalysts for NH3-SCR

A series of novel Mn₆Zr_1-xCo_x denitrification catalysts were prepared by the co-precipitation method. The effect of co-modification of MnO_x catalyst by zirconium and cobalt on the performance of NH₃-SCR was studied by doping transition metal cobalt into the Mn₆Zr₁ catalyst. The ternary oxide catalyst Mn₆Zr_0.3Co_0.7 can reach about 90% of NO_x conversion in a reaction temperature range of 100–275°C, and the best NO_x conversion can reach up to 99%. In addition, the sulfur resistance and water resistance of the Mn₆Zr_0.3Co_0.7 catalyst were also tested. When the concentration of SO₂ is 200ppm, the NO_x conversion of catalyst Mn₆Zr_0.3Co_0.7 is still above 90%. 5 Vol% H₂O has little effect on catalyst NO_x conversion. The results showed that the Mn₆Zr_0.3Co_0.7 catalyst has excellent resistance to sulfur and water. Meanwhile, the catalyst was systematically characterized. The results showed that the addition of zirconium and cobalt changes the surface morphology of the catalyst. The specific surface area, pore size, and volume of the catalyst were increased, and the reduction temperature of the catalyst was decreased. In conclusion, the doping of zirconium and cobalt successfully improves the NH₃-SCR activity of the catalyst.

Single-Atom Ce-Modified α-Fe2O3 for Selective Catalytic Reduction of NO with NH3

A single-atom Ce-modified α-Fe₂O₃ catalyst (Fe_0.93Ce_0.07O_x catalyst with 7% atomic percentage of Ce) was synthesized by a citric acid-assisted sol-gel method, which exhibited excellent performance for selective catalytic reduction of NO_x with NH₃ (NH₃-SCR) over a wide operating temperature window. Remarkably, it maintained ∼93% NO conversion efficiency for 168 h in the presence of 200 ppm SO₂ and 5 vol % H₂O at 250 °C. The structural characterizations suggested that the introduction of Ce leads to the generation of local Fe-O-Ce sites in the FeO_x matrix. Furthermore, it is critical to maintain the atomic dispersion of the Ce species to maximize the amounts of Fe-O-Ce sites in the Ce-doped FeO_x catalyst. The formation of CeO₂ nanoparticles due to a high doping amount of Ce species leads to a decline in catalytic performance, indicating a size-dependent catalytic behavior. Density functional theory (DFT) calculation results indicate that the formation of oxygen vacancies in the Fe-O-Ce sites is more favorable than that in the Fe-O-Fe sites in the Ce-free α-Fe₂O₃ catalyst. The Fe-O-Ce sites can promote the oxidation of NO to NO₂ on the Fe_0.93Ce_0.07O_x catalyst and further facilitate the reduction of NO_x by NH₃. In addition, the decomposition of NH₄HSO₄ can occur at lower temperatures on the Fe_0.93Ce_0.07O_x catalyst containing atomically dispersed Ce species than on the α-Fe₂O₃ reference catalyst, resulting in the good SO₂/H₂O resistance ability in the NH₃-SCR reaction.

Ordered Mesoporous MnAlOx Oxides Dominated by Calcination Temperature for the Selective Catalytic Reduction of NOx with NH3 at Low Temperature

Manganese alumina composited oxides (MnAlOx) catalysts with ordered mesoporous structure prepared by evaporation-induced self-assembly (EISA) method was designed for the selective catalytic reduction (SCR) of NOx with NH3 at low temperature. The effect of calcination temperature of MnAlOx catalysts was investigated systematically, and it was correlated with SCR activity. Results showed that with an increase in calcination temperature, the SCR activity of MnAlOx catalysts increased. When the calcination temperature was raised up to 800 °C, the NOx conversion was more than 90% in the operation temperature range of 150~240 °C. Through various characterization analysis, it was found that MnAlOx-800 °C catalysts possessed enhanced redox capacities as the higher content of Mn4+/(Mn3+ + Mn4+). Moreover, the improved redox properties could contribute to a higher NOx adsorption and activation ability, which lead to higher SCR performance of MnAlOx-800 °C catalysts. In situ DRIFTs revealed that the adsorbed NO2 and bidentate nitrate are the reactive intermediate species, and NH3 species bonded to Lewis acid sites taken part in SCR progress. The SCR progress predominantly followed E–R mechanism, while L–H mechanism also takes effect to a certain degree.

Low-Temperature Selective NO Reduction by CO over Copper-Manganese Oxide Spinels

Selective catalytic reduction of NO with CO (CO-SCR) has been suggested as an attractive and promising technology for removing NO and CO simultaneously from flue gas. Manganese-copper spinels are a promising CO−SCR material because of the high stability and redox properties of the spinel structure. Here, we synthesized CuxMn3-xO4 spinel by a citrate-based modified pechini method combining CuO and MnOx, controlling the molar Cu/Mn concentrations. All the samples were characterized by SEM, EDX, XRD, TEM, H2−TPR, XPS and nitrogen adsorption measurements. The Cu1.5Mn1.5O4 catalyst exhibits 100% NO conversion and 53.3% CO conversion at 200 °C. The CuxMn3-xO4 catalyst with Cu-O-Mn structure has a high content of high valence Mn, and the high mass transfer characteristics of the foam-like structure together promoted the reaction performance. The CO-SCR catalytic performance of Cu was related to the spinel structure with the high ratio of Mn4+/Mn, the synergistic effect between the two kinds of metal oxides and the multistage porous structure.

Progress in Metal-Organic Framework Catalysts for Selective Catalytic Reduction of NOx: A Mini-Review

Nitrogen oxides released from the combustion of fossil fuels are one of the main air pollutants. Selective catalytic reduction technology is the most widely used nitrogen oxide removal technology in the industry. With the development of nanomaterials science, more and more novel nanomaterials are being used as catalysts for the selective reduction of nitrogen oxides. In recent years, metal-organic frameworks (MOFs), with large specific surface areas and abundant acid and metal sites, have been extensively studied in the selective catalytic reduction of nitrogen oxides. This review summarizes recent progress in monometallic MOFs, bimetallic MOFs, and MOF-derived catalysts for the selective catalytic reduction of nitrogen oxides and compares the reaction mechanisms of different catalysts. This article also suggests the advantages and disadvantages of MOF-based catalysts compared with traditional catalysts and points out promising research directions in this field.

Mechanism of peroxymonosulfate activation and the utilization efficiency using hollow (Co, Mn)3O4 nanoreactor as an efficient catalyst for degradation of organic pollutants

Development of efficient catalysts for peroxymonosulfate (PMS) activation and further understanding its mechanism on organic pollutants degradation is of significant importance for advanced oxidation processes (AOPs). Herein, hollow (Co, Mn)₃O₄ catalysts were synthesized by calcination of Co, Mn containing metal-organic frameworks (MOFs) and further used to evaluate the effectiveness of organic pollutants (Bisphenol A (BPA), atrazine (ATZ), and diethyl phthalate (DEP)) degradation by PMS activation. The PMS utilization efficiency in (Co, Mn)₃O₄/PMS system (36.4%) was estimated to be 28.0% and 43.8% higher than that of Co₃O₄/PMS and Mn₅O₈/PMS system, respectively. Notably, the metal leaching in (Co, Mn)₃O₄/PMS system was significantly suppressed. The utilization efficiency also reveals an inverse proportionality relationship with BPA mineralization but decreases with increasing initial pH value. A synergy between oxides of Co and Mn was perceived to enhance PMS utilization efficiency and BPA degradation. The results indicate enhanced catalytic performance with (Co, Mn)₃O₄ compared to Co₃O₄ derived from Co-MOF and other reported catalysts, with 99% of BPA degradation within 4 min. The oxidation mechanism was then proposed based on the electron paramagnetic resonance (EPR) and XPS results. Our findings might have contributed to designing heterogeneous catalysts for efficient PMS utilization in AOPs.

Metal-Organic Frameworks for NOx Adsorption and Their Applications in Separation, Sensing, Catalysis, and Biology

Nitrogen oxide (NO_x ) is a family of poisonous and highly reactive gases formed when fuel is burned at high temperatures during anthropogenic behavior. It is a strong oxidizing agent that significantly contributes to the ozone and smog in the atmosphere. Thus, NO_x removal is important for the ecological environment upon which the civilization depends. In recent decades, metal-organic frameworks (MOFs) have been regarded as ideal candidates to address these issues because they form a reticular structure between proper inorganic and organic constituents with ultrahigh porosity and high internal surface area. These characteristics render them chemically adaptable for NO_x adsorption, separation, sensing, and catalysis. In additional, MOFs enable potential nitric oxide (NO) delivery for the signaling of molecular NO in the human body. Herein, the different advantages of MOFs for coping with current environmental burdens and improving the habitable environment of humans on the basis of NO_x adsorption are reviewed.

Porphyrin-Based COF 2D Materials: Variable Modification of Sensing Performances by Post-Metallization

2D nanomaterials with flexibly modifiable surfaces are highly sought after for various applications, especially in room-temperature chemiresistive gas sensing. Here, we have prepared a series of COF 2D nanomaterials (porphyrin-based COF nanosheets (NS)) that enabled highly sensitive and specific-sensing of NO₂ at room temperature. Different from the traditional 2D sensing materials, H₂ -TPCOF was designed with a largely reduced interlayer interaction and predesigned porphyrin rings as modifiable sites on its surfaces for post-metallization. After post-metallization, the metallized M-TPCOF (M=Co and Cu) showed remarkably improved sensing performances. Among them, Co-TPCOF exhibited highly specific sensing toward NO₂ with one of the highest sensitivities of all reported 2D materials and COF materials, with an ultra-low limit-of-detection of 6.8 ppb and fast response/recovery. This work might shed light on designing and preparing a new type of surface-highly-modifiable 2D material for various chemistry applications.

One-step synthesis by redox co-precipitation method for low-dimensional Me-Mn bi-metal oxides (Me=Co, Ni, Sn) as SCR DeNOx catalysts

In this research, one-step synthesis of redox co-precipitation method (using sodium lauryl sulfate, KMnO₄, and metal precursor) was well applicable in universally preparing low-dimensional Me-MnOx nanosheet catalysts with different metal doping (Me=Co, Ni, or Sn). NH₃-SCR activity was explored to the relationship with structure morphology and physio-chemical properties via the characterization techniques of SEM, XRD, XPS, H₂-TPR, and NH₃-TPD. It was found that Ni-MnOx has a relatively poor activity at low-down temperature but was improved as the reaction temperature rising. Co-MnOx presented a relatively stable catalytic activity of which the NOx conversion rate can be maintained 80~90% in a wide temperature window of 100-250 °C with relatively better N₂ selectivity. Compared with Co- or Ni-modified MnOx, Sn-MnOx catalyst has an excellent low-temperature catalytic activity (93% NOx conversion at 100 °C) that was maintained > 80% before 200 °C but with poor selectivity to N₂. Due to its nanosheet-structured solid solution structure, Sn-MnOx promoted the interaction between MnOx and SnO₂ with the increased contents of adsorbed oxygen and also the numbers of surface Lewis acid sites, which integrally promoted the NH₃-SCR reaction at low temperature and also contributed to an acceptable resistances to water and sulfur. High content of adsorbed oxygen was beneficial to improve the catalytic activity at lower temperatures, while the electron cycle interaction of different metal valence ions will play a more important role with the increase of reaction temperature.

Co- or Ni-modified Sn-MnOx low-dimensional multi-oxides for high-efficient NH3-SCR De-NOx: Performance optimization and reaction mechanism

NH₃-SCR performances were explored to the relationship between structure morphology and physio-chemical properties over low-dimensional ternary Mn-based catalysts prepared by one-step synthesis method. Due to its strong oxidation performance, Sn-MnOx was prone to side reactions between NO, NH₃ and O₂, resulting in the generation of more NO₂ and N₂O, here most of N₂O was driven from the non-selective oxidation of NH₃, while a small part generated from the side reaction between NH₃ and NO₂. Co or Ni doping into Sn-MnOx as solid solution components obviously stronged the electronic interaction for actively mobilization and weakened the oxidation performance for signally reducing the selective tendency of side reactions to N₂O. The optimal modification resulted in improving the surface area and enhancing the strong interaction between polyvalent cations in Co/Ni-Mn-SnO₂ to provide more surface adsorbed oxygen, active sites of Mn³⁺ and Mn⁴⁺, high-content Sn⁴⁺ and plentiful Lewis-acidity for more active intermediates, which significantly broadened the activity window of Sn-MnOx, improved the N₂ selectivity by inhibiting N₂O formation, and also contributed to an acceptable resistances to water and sulfur. At low reaction temperatures, the SCR reactions over three catalysts mainly obeyed the typical Elye-rideal (E-R) routs via the reactions of adsorbed l-NHx (x = 3, 2, 1) and B-NH₄⁺ with the gaseous NO to generate N₂ but also N₂O by-products. Except for the above basic E-R reactions, as increasing the reaction temperature, the main adsorbed NOx-species were bidentate nitrates that were also active in the Langmuir-Hinshelwood reactions with adsorbed l-NHx species over Co/Ni modified Mn-SnO₂ catalyst.

Tailor the crystal planes of MIL-101(Fe) derivatives to enhance the activity of SCR reaction at medium and low temperature

Mainly exposed crystal facets and controllable morphology play a key role in the final performance of the preparation of specific nanomaterials. In the present study, a metal-organic framework pyrolysis method without adding solvent modifiers was developed. By adding CO in the calcination atmosphere to change atmosphere ratio, Fe₃O₄ nanostructures are exposed with different crystal planes and evaluated their performance in NH₃-SCR reaction. This study proves that SCR catalytic activity of Fe₃O₄ nanocrystals is dependent on morphology and crystal facet. Compared with materials exposed (100), catalysts with more (111) show stronger deNO_x performance. The preferential exposure of Fe₃O₄ (111) crystal facets increases the concentration of adsorbed oxygen on the catalyst, showing higher surface acidity, and enhances the interaction among NO, O₂ and catalyst, which is conducive to SCR reaction. This is supported by DFT calculations. The results present a great application prospect in preparing nanomaterials with specific crystal structures to effectively treat pollutants.