Interaction of Metals and Protons with Algae. 4. Ion Exchange vs Adsorption Models and a Reassessment of Scatchard Plots; Ion-Exchange Rates and Equilibria Compared with Calcium Alginate

Alleviating binary toxicity of polystyrene nanoplastics and atrazine to Chlorella vulgaris through humic acid interaction: Long-term toxicity using environmentally relevant concentrations

In this study, microalgae Chlorella vulgaris (C. vulgaris) were simultaneously exposed to environmental concentrations of amino-functionalized polystyrene nanoplastics (PS-NH2; 0.05, 0.1, 0.2, 0.3 and 0.4 mg/L) and the world's second most used pesticide, the herbicide atrazine (ATZ; 10 μg/L), in the absence and presence of humic acid (HA; 1 mg/L) for 21 days. Due to the low concentrations of PS-NH2, the majority of them could not cause a significant difference in the end-points of biomass, chlorophylls a and b, total antioxidant, total protein, and superoxide dismutase and malondialdehyde compared to the control group (p > 0.05). On the other hand, by adding ATZ to the PS-NH2, all the mentioned end-point values showed a considerable difference from the control (p < 0.05). The exposure of PS-NH2+ATZ treatments to the HA could remarkably reduce their toxicity, additionally, HA was able to decrease the changes in the expression of genes related to oxidative stress (e.g., superoxide dismutase, glutathione reductase, and catalase) in the C. vulgaris in the most toxic treatment group (e.g., PS-NH2+ATZ). The synergistic toxicity of the PS-NH2+ATZ group could be due to their enhanced bioavailability for algal cells. Nevertheless, the toxicity alleviation in the PS-NH2+ATZ treatment group after the addition of HA could be due to the eco-corona formation, and changes in their zeta potential from positive to negative value, which would increase their electrostatic repulsion with the C. vulgaris cells, in such a way that HA also caused a decrease in the formation of C. vulgaris-NPs hetero-aggregates. This research underscores the complex interplay between PS-NH2, ATZ, and HA in aquatic environments and their collective impact on microalgal communities.

Mechanisms underlying the alleviated cadmium toxicity in marine diatoms adapted to ocean acidification

Anthropogenic activities have significantly increased the influx of carbon dioxide and metals into the marine environment. Combining ocean acidification (OA) and metal pollution may lead to unforeseen biological and ecological consequences. Several studies have shown that OA reduces cadmium (Cd) toxicity in marine diatoms. Although these studies have shed light on the physiological and transcriptomic responses of diatoms exposed to Cd, many aspects of the mechanisms underlying the reduced metal accumulation in diatoms remain unknown. This study aims to address this unresolved question by comparing Cd subcellular distribution, antioxidant enzyme activity, relative expression of metal transporters, surface potential, surface composition, and transmembrane potential in the diatom Phaeodactylum tricornutum grown under ambient and 1200 µatm pCO2 conditions. Our findings reveal that diatoms grown in acidified seawater exhibit higher surface potential and higher plasma membrane depolarization. These changes and the competing effects of increased H+ concentration result in a blunted response of P. tricornutum to the Cd challenge. Consequently, this study offers a new explanation for mitigating Cd toxicity by marine diatoms adapted to OA.

Metal sequestration by Microcystis extracellular polymers: a promising path to greener water treatment

The problem of heavy metal pollution in water bodies poses a significant threat to both the environment and human health, as these toxic substances can persist in aquatic ecosystems and accumulate in the food chain. This study investigates the promising potential of using Microcystis aeruginosa extracellular polymeric substances (EPS) as an environmentally friendly, highly efficient solution for capturing copper (Cu2+) and nickel (Ni2+) ions in water treatment, emphasizing their exceptional ability to promote green technology in heavy metal sequestration. We quantified saccharides, proteins, and amino acids in M. aeruginosa biomass and isolated EPS, highlighting their metal-chelating capabilities. Saccharide content was 36.5 mg g-1 in biomass and 21.4 mg g-1 in EPS, emphasizing their metal-binding ability. Proteins and amino acids were also prevalent, particularly in EPS. Scanning electron microscopy (SEM) revealed intricate 3D EPS structures, with pronounced porosity and branching configurations enhancing metal sorption. Elemental composition via energy dispersive X-ray analysis (EDAX) identified essential elements in both biomass and EPS. Fourier transform infrared (FTIR) spectroscopy unveiled molecular changes after metal treatment, indicating various binding mechanisms, including oxygen atom coordination, π-electron interactions, and electrostatic forces. Kinetic studies showed EPS expedited and enhanced Cu2+ and Ni2+ sorption compared to biomass. Thermodynamic analysis confirmed exothermic, spontaneous sorption. Equilibrium biosorption studies displayed strong binding and competitive interactions in binary metal systems. Importantly, EPS exhibited impressive maximum sorption capacities of 44.81 mg g-1 for Ni2+ and 37.06 mg g-1 for Cu2+. These findings underscore the potential of Microcystis EPS as a highly efficient sorbent for heavy metal removal in water treatment, with significant implications for environmental remediation and sustainable water purification.

Isolation and Investigation of Natural Rare Earth Metal Chelating Agents From Calothrix brevissima - A Step Towards Unraveling the Mechanisms of Metal Biosorption

In this study water soluble compounds that form complexes with Rare Earth Elements (REE) and other metals were isolated from Calothrix brevissima biomass with chromatographic methods for the first time. Molecular characterization showed that the isolated compounds are most likely polysaccharides comprised of arabinose, xylose, mannose, galactose and glucose. FT-IR analysis revealed functional groups involved in the binding mechanism of Tb are likely sulfate- and to a lesser extend hydroxyl-groups. The binding specificity of the isolated compounds was investigated with different metal solutions. Here, ions of the alkali and alkaline earth metals Na, K, Mg and Ca showed no competition for Tb-binding even at 10-fold excess concentration. Ions of the elements Co and Pb on the other hand replaced Tb at higher concentrations. Addition of the isolated compounds significantly reduced the precipitation of Eu at pH-values between 6.7 and 9.5, indicating that the interaction between the isolated chelators and Rare Earth Metals is stable even at high pH-values.

Long-term acclimation to cadmium exposure reveals extensive phenotypic plasticity in Chlamydomonas

Increasing industrial and anthropogenic activities are producing and releasing more and more pollutants in the environment. Among them, toxic metals are one of the major threats for human health and natural ecosystems. Because photosynthetic organisms play a critical role in primary productivity and pollution management, investigating their response to metal toxicity is of major interest. Here, the green microalga Chlamydomonas (Chlamydomonas reinhardtii) was subjected to short (3 d) or chronic (6 months) exposure to 50 µM cadmium (Cd), and the recovery from chronic exposure was also examined. An extensive phenotypic characterization and transcriptomic analysis showed that the impact of Cd on biomass production of short-term (ST) exposed cells was almost entirely abolished by long-term (LT) acclimation. The underlying mechanisms were initiated at ST and further amplified after LT exposure resulting in a reversible equilibrium allowing biomass production similar to control condition. This included modification of cell wall-related gene expression and biofilm-like structure formation, dynamics of metal ion uptake and homeostasis, photosynthesis efficiency recovery and Cd acclimation through metal homeostasis adjustment. The contribution of the identified coordination of phosphorus and iron homeostasis (partly) mediated by the main phosphorus homeostasis regulator, Phosphate Starvation Response 1, and a basic Helix-Loop-Helix transcription factor (Cre05.g241636) was further investigated. The study reveals the highly dynamic physiological plasticity enabling algal cell growth in an extreme environment.

The roles of silicon in combating cadmium challenge in the Marine diatom Phaeodactylum tricornutum

Marine phytoplankton possess a sophisticated homeostatic network to counteract metal toxicity. Changes in environmental conditions such as ambient nutrient concentrations can significantly impact their intrinsic metal sensitivity. In this study, we evaluated the role of silicon (Si) in counteracting cadmium (Cd) toxicity in the marine diatom Phaeodactylum tricornutum. We first demonstrated that Si enrichment dramatically enhanced Cd tolerance and changed the Cd accumulation in the diatom. Our modeling suggested that Si-enriched cells adsorbed more Cd but had a higher Cd elimination rate than the Si-starved cells. Examinations by atomic force microscopy and X-ray photoelectron spectroscopy revealed that the Si-enriched cells had better silification and more SiO^- in the cell walls, which markedly lowered the surface potential of the diatom cells and allowed them to attract more Cd. Although the Si-enriched cells tended to have a high Cd burden when facing Cd stress, they suppressed the increase of intracellular Cd by both down-regulating the influx transporter ZIP and up-regulating the efflux transporter ATPase5-1B. Our study shows the significant roles Si plays in maintaining metal homeostasis and combating Cd challenge in marine diatoms.

Effect of CaCO3(S) Nucleation Modes on Algae Removal from Alkaline Water

The role of calcite heterogeneous nucleation was studied in a particle-coagulation treatment process for removing microalgae from water. Batch experiments were conducted with Scenedesmus sp. and Chlorella sp. in the presence and absence of carbonate and in the presence and absence of magnesium to delineate the role of CaCO_3(S) nucleation on microalgae removal. The results indicate that effective algae coagulation (e.g., up to 81% algae removal efficiency) can be achieved via heterogeneous nucleation with CaCO_3(S); however, supersaturation ratios between 120 and 200 are required to achieve at least 50% algae removal, depending on ion concentrations. Algae removal was attributed to the adsorption of Ca²⁺ onto the cell surface, which provides nucleation sites for CaCO_3(S) precipitation. Bridging of calcite particles between the algal cells led to rapid aggregation and formation of larger flocs. However, at higher supersaturation conditions, algae removal was diminished due to the dominance of homogeneous nucleation of CaCO_3(S). The removal of algae in the presence of Ca²⁺ and Mg²⁺ required higher supersaturation values; however, the shift from heteronucleation to homonucleation with increasing supersaturation was still evident. The results suggest that water chemistry, pH, ionic strength, alkalinity, and Ca²⁺ concentration can be optimized for algae removal via coagulation and sedimentation.

Mechanistic insight into protein supported biosorption complemented by kinetic and thermodynamics perspectives

In this review, we discussed the micro-level aspects of protein supported biosorption. The mechanism, surface chemistry in terms of energy interactions and electron transfer process (ETP) of peptide systems within protein are three important areas that provide mechanistic insight into protein supported biosorption. The functional groups in proteinous material like hydroxyl (-OH), carbonyl (>C=O), carboxyl (-COOH) and sulfhydryl (-SH) play a significant role in the biosorption of variety of pollutants such as metal ions, metalloids, and organic matters in wastewaters. The mechanistic aspects of biosorption are crucial not only for the separation process but also they contribute towards stoichiometric considerations and mathematical modelling process. The surface chemistry of applied biosorbents relies on interfacial components whose interaction energies are estimated with help of classical Derjaguin, Landau, Verwey, and Overbeek (DLVO) theory mathematically. Proteins are the fundamental molecules of many biomaterial used for the biosorption of contaminents and peptide bond is considered as the backbone of proteins. The charge variations on peptide bonding is the result of ETP whose discussion was made part of this review for understaning number of biological and technological processes of vital interests. In addition, this review was complemented by exhaustive overview of kinetic and thermodynamics perspectives of biosorption process.

Calcium Carbonate

Calcium carbonate is a chemical compound with the formula CaCO3 formed by three main elements: carbon, oxygen, and calcium. It is a common substance found in rocks in all parts of the world (most notably as limestone), and is the main component of shells of marine organisms, snails, coal balls, pearls, and eggshells. CaCO3 exists in different polymorphs, each with specific stability that depends on a diversity of variables.

Evaluation of zinc oxide nanoparticles toxicity on marine algae chlorella vulgaris through flow cytometric, cytotoxicity and oxidative stress analysis

The increasing industrial use of nanomaterials during the last decades poses a potential threat to the environment and in particular to organisms living in the aquatic environment. In the present study, the toxicity of zinc oxide nanoparticles (ZnO NPs) was investigated in Marine algae Chlorella vulgaris (C. vulgaris). High zinc dissociation from ZnONPs, releasing ionic zinc in seawater, is a potential route for zinc assimilation and ZnONPs toxicity. To examine the mechanism of toxicity, C. vulgaris were treated with 50mg/L, 100mg/L, 200mg/L and 300 mg/L ZnO NPs for 24h and 72h. The detailed cytotoxicity assay showed a substantial reduction in the viability dependent on dose and exposure. Further, flow cytometry revealed the significant reduction in C. vulgaris viable cells to higher ZnO NPs. Significant reductions in LDH level were noted for ZnO NPs at 300 mg/L concentration. The activity of antioxidant enzyme superoxide dismutase (SOD) significantly increased in the C. vulgaris exposed to 200mg/L and 300 mg/L ZnO NPs. The content of non-enzymatic antioxidant glutathione (GSH) significantly decreased in the groups with a ZnO NPs concentration of higher than 100mg/L. The level of lipid peroxidation (LPO) was found to increase as the ZnO NPs dose increased. The FT-IR analyses suggested surface chemical interaction between nanoparticles and algal cells. The substantial morphological changes and cell wall damage were confirmed through microscopic analyses (FESEM and CM).

Effect of cobalt enrichment on growth and hydrocarbon accumulation of Botryococcus braunii with immobilized biofilm attached cultivation

The effects of cobalt enrichment on the growth and hydrocarbon accumulation were studied with biofilm attached cultivation. Under biofilm attached cultivation conditions, the microalga Botryococcus braunii survived high concentration of cobalt (50× normal level). The crude hydrocarbon content as well as the long C chain component (C31) increased under Co enrichment treatment indicating the activity of key enzyme that catalyze hydrocarbon synthesis might be enhanced by Co enrichment. The reduced carbohydrate and protein contents accompanied by increased hydrocarbon content for Co enrichment treatment indicating the Co was also an effective factor that controls the carbon flow of B. braunii. Under Co enrichment treatment, totally 1473.9 μmol of Co element was consumed to produce one gram of algal biomass, indicating this attached cultivation method is high efficient in heavy metal elements removal.

Binding of bivalent metal cations by α-l-guluronate: insights from the DFT-MD simulations

Theoretically calculated free energy profiles give insight into the molecular aspects of metal ion binding by uronate biopolymers.

Self-assembly of stiff, adhesive and self-healing gels from common polyelectrolytes

Underwater adhesion has numerous potential medical, household, and industrial applications. It is typically achieved through covalent polymerization and cross-linking reactions and/or the use of highly specialized biological or biomimetic polymers. As a simpler alternative to these covalent and biomimetic strategies, this article shows that stiff, gel-like complexes that adhere to various substrates under water can also be prepared through the ionic cross-linking of common, commercial polyelectrolytes. The gels form spontaneously when synthetic polycations, such as poly(allylamine) (PAH), are mixed with strongly binding multivalent anions, pyrophosphate (PPi) and tripolyphosphate (TPP). The PAH/PPi and PAH/TPP gels exhibit very high storage moduli (G∞′ ≈ 400 kPa), self-heal when torn, and adhere to both hydrophilic and hydrophobic substrates under water (with short-term tensile adhesion strengths of 350–450 kPa). Furthermore, these gels can be dissolved on demand (if adhesion needs to be reversed) by changing the ambient pH, which controls the ionization state of the polyelectrolyte and ionic cross-linker. These properties suggest that synthetic polycations cross-linked with PPi and TPP ions could provide a simple, inexpensive, and scalable platform for underwater adhesion.

Bioremediation of a complex industrial effluent by biosorbents derived from freshwater macroalgae

Biosorption with macroalgae is a promising technology for the bioremediation of industrial effluents. However, the vast majority of research has been conducted on simple mock effluents with little data available on the performance of biosorbents in complex effluents. Here we evaluate the efficacy of dried biomass, biochar, and Fe-treated biomass and biochar to remediate 21 elements from a real-world industrial effluent from a coal-fired power station. The biosorbents were produced from the freshwater macroalga Oedogonium sp. (Chlorophyta) that is native to the industrial site from which the effluent was sourced, and which has been intensively cultivated to provide a feed stock for biosorbents. The effect of pH and exposure time on sorption was also assessed. These biosorbents showed specificity for different suites of elements, primarily differentiated by ionic charge. Overall, biochar and Fe-biochar were more successful biosorbents than their biomass counterparts. Fe-biochar adsorbed metalloids (As, Mo, and Se) at rates independent of effluent pH, while untreated biochar removed metals (Al, Cd, Ni and Zn) at rates dependent on pH. This study demonstrates that the biomass of Oedogonium is an effective substrate for the production of biosorbents to remediate both metals and metalloids from a complex industrial effluent.

Uptake and sorption of aluminium and fluoride by four green algal species

Background

We examined the uptake and sorption of aluminium (Al) and fluoride (F) by green algae under conditions similar to those found in the effluents of the aluminium industry. We took into account the speciation of Al in the medium since Al can form stable complexes with F and these complexes may play a role in the uptake and sorption of Al. We compared the capacity of four species of green algae (i.e. Chlamydomonas reinhardtii, Pseudokirchneriella subcapitata, Chlorella vulgaris, and Scenedesmus obliquus) to accumulate and adsorb Al and F. The selected algae were exposed during 4 days, covering all growth phases of algae, to a synthetic medium containing Al and F at pH 7.0. During this period, dissolved Al as well as cellular growth were followed closely. At the end of the exposure period, the solutions were filtered in order to harvest the algal cells. The cells were then rinsed with enough ethylene diaminetetraacetic acid to remove loosely bound ions from the algal surface, determined from the filtrates. Finally, the filters were digested in order to quantify cellular uptake.

Results

Little difference in Al removal was observed between species. Aluminium sorption (15%) and uptake (26%) were highest in P. subcapitata, followed by C. reinhardtii (7% and 17% respectively), S. obliquus (13% and 5%), and C. vulgaris (7% and 2%). However, none of these species showed significant uptake or sorption of F. We also studied the influence of pH on the uptake and sorption of Al and F by P. subcapitata. We measured a combined uptake and sorption of Al of 50% at pH 7.5, of 41% at pH 7.0, and of 4% at pH 5.5. Thus, accumulation was reduced with acidification of the medium as expected by the increased competition with protons and possibly by a reduced bioavailability of the Al-F complexes which dominated the solution at low pH.

Conclusion

Out of the four tested species, P. subcapitata showed the highest sorption of aluminium and fluoride under our test conditions. These results provide key information on the development of an environmental biotechnology which can be applied to industrial effluents.

Binding of heavy metals by algal biosorbents. Theoretical models of kinetics, equilibria and thermodynamics

Biosorption is an extensively studied technology applied for the removal of heavy metal ions and other pollutants from aqueous solutions. Most biosorption research is focused on the experimentally measured sorption isotherms, kinetics and thermodynamics. The aim of this paper is to review a class of theoretical models developed for the interpretation of such experimental data related to biosorption of metal cations by alginate-containing sorbents (e.g. algal biosorbents). The focus is put on: (i) modeling the biosorption equilibrium isotherms (including the description of the pH and ionic strength effects); (ii) thermodynamics of biosorption; (iii) kinetics of biosorption; and (iv) metal ion binding modes. This review facilitates the choice of the model suitable for the given type of data and describes the most common mistakes made during the data analysis (e.g. the use of incorrect or oversimplified models).

Determining the colloidal behavior of ionically cross-linked polyelectrolytes with isothermal titration calorimetry

Mixtures of polyelectrolytes and multivalent counterions can self-assemble into colloidal complexes. These complexes attract widespread interest in applications such as medicine, household product formulations, and separation processes. To facilitate the development of these colloidal dispersions, we examined isothermal titration calorimetry (ITC) as an automated screening tool for identifying the polymer and multivalent counterion compositions that (1) form ionically cross-linked colloidal complexes and (2) lead to their rapid coagulation (and macroscopic phase separation). By studying various polyelectrolyte/multivalent counterion mixtures, we have identified and generalized the features in the ITC data that indicate colloidal complex formation and coagulation. The limitations of this calorimetric screening method were also elucidated. These analyses suggest that ITC can be effective for screening the short-term colloidal behavior of polyelectrolyte/multivalent counterion mixtures but are unreliable in revealing their long-term (equilibrium) properties.

A Review of Biosorption of Chromium Ions by Microorganisms

Due to its widespread industrial use, chromium has become a serious pollutant in diverse environmental settings. The main source of chromium pollution including the Republic o Moldova is industry. It is a great need to develop new eco-friendly methods of chromium removal. Biosorption of heavy metals is a most promising technology involved in the removal of toxic metals from industrial waste streams and natural waters. This article is an extended abstract of a communication presented at the Conference Ecological Chemistry 2012.

Sorption of lead, copper, and cadmium by calcium alginate. Metal binding stoichiometry and the pH effect

Binding of heavy metal ions by calcium alginate has been described in the literature with many different models. In the present study, two most basic models were used to systematically compare their simultaneous description of metal uptake dependence on pH and metal ion concentration in the bulk solution. The experimental datasets corresponding to the binary sorption systems containing protons and heavy metal ion (cadmium, lead, or copper) were taken from the literature. The applicability and limitations of both models are discussed. Neither of the models gave a completely satisfactory description of all data. The two-site occupancy model yielded better results compared to the one-site occupancy model when considering the coherence of the parameters (e.g., affinity constants) but the quality of the obtained fits is similar in both cases.

Water chemistry influences the toxicity of silver to the green-lipped mussel Perna viridis

The study determined the influence and relative importance of water chemistry parameters (pH, alkalinity, hardness) on the acute toxicity of silver to the green mussel Perna viridis. A preliminary bioassay revealed that 4 mg L(-1) of silver caused 50% mortality (LC50) in 96 h for mussels placed in seawater with pH 8.5, hardness 1,872 mg L(-1), and alkalinity 172 mg L(-1). Mortality of mussels increased with decreasing pH and increasing hardness and alkalinity variables. In contrast the mortality decreased with increasing pH and decreasing hardness and alkalinity values. The water chemistry also affected the concentration of silver in experimental seawater and bioaccumulation of silver in mussels. The results revealed that the chemical properties of seawater must be considered while conducting toxicity tests with metals like silver. The possible explanations for the influence of water chemistry on silver toxicity to P. viridis are discussed.

Application of the Nernst-Planck approach to lead ion exchange in Ca-loaded Pelvetia canaliculata

Ca-loaded Pelvetia canaliculata biomass was used to remove Pb(2+) in aqueous solution from batch and continuous systems. The physicochemical characterization of algae Pelvetia particles by potentiometric titration and FTIR analysis has shown a gel structure with two major binding groups - carboxylic (2.8 mmol g(-1)) and hydroxyl (0.8 mmol g(-1)), with an affinity constant distribution for hydrogen ions well described by a Quasi-Gaussian distribution. Equilibrium adsorption (pH 3 and 5) and desorption (eluents: HNO(3) and CaCl(2)) experiments were performed, showing that the biosorption mechanism was attributed to ion exchange among calcium, lead and hydrogen ions with stoichiometry 1:1 (Ca:Pb) and 1:2 (Ca:H and Pb:H). The uptake capacity of lead ions decreased with pH, suggesting that there is a competition between H(+) and Pb(2+) for the same binding sites. A mass action law for the ternary mixture was able to predict the equilibrium data, with the selectivity constants alpha(Ca)(H)=9+/-1 and alpha(Ca)(Pb)=44+/-5, revealing a higher affinity of the biomass towards lead ions. Adsorption (initial solution pH 4.5 and 2.5) and desorption (0.3M HNO(3)) kinetics were performed in batch and continuous systems. A mass transfer model using the Nernst-Planck approximation for the ionic flux of each counter-ion was used for the prediction of the ions profiles in batch systems and packed bed columns. The intraparticle effective diffusion constants were determined as 3.73x10(-7)cm(2)s(-1) for H(+), 7.56x10(-8)cm(2)s(-1) for Pb(2+) and 6.37x10(-8)cm(2)s(-1) for Ca(2+).

The effect of organic ligands exuded by intertidal seaweeds on copper complexation

Copper complexation in marine systems is mainly controlled by organic matter, partially produced by micro- and macroalgae that release exudates with the capacity to bind metals. This feature is important as it influences bioavailability, bioaccumulation, toxicity, and transport of copper through biological membranes. The release of Cu-complexing ligands by seaweeds cultured under copper excess was studied in the laboratory. Five macroalgae belonging to different functional groups were used, including the filamentous Chaetomorphafirma (Chlorophyta), the foliose Ulvalactuca (Chlorophyta) and Porphyra columbina (Rhodophyta), the corticated Gelidium lingulatum (Rhodophyta), and the leathery Lessonia nigrescens (Phaeophyceae). The concentration of ligands and their copper-binding strength (logK') of exudates released by each species was determined by anodic stripping voltammetry (ASV). The selected algae released exudates in a wide range of concentration (42-117 nM) after 48h of culture, and addition of 157nM copper increased the production of ligands up to 8 times. A relationship between structural complexity or thallus thickness and the amount of ligands released was not observed. The binding strength (logK') varied among species from 7.6 to 8.9, a response that was not modified by exposure to sub-lethal copper excess. The kelp L. nigrescens showed a fast response to copper excess, releasing ligands that reduced toxicity of the metal in hours. Results suggest that intertidal and shallow subtidal macroalgae might have been overlooked regarding their role as producers of organic ligands and, therefore, as modulators of metal complexing capacity in coastal waters.

Adsorption of Cu(II), Cd(II) and Pb(II) from aqueous single metal solutions by succinylated twice-mercerized sugarcane bagasse functionalized with triethylenetetramine

This study describes the preparation of two new chelating materials, MMSCB 3 and 5, derived from succinylated twice-mercerized sugarcane bagasse (MMSCB 1). MMSCB 3 and 5 were synthesized from MMSCB 1 using two different methods as described by Gurgel and Gil (2009). In the first method MMSCB 1 was activated with 1,3-diisopropylcarbodiimide and in the second with acetic anhydride (to form an internal anhydride) and later both were reacted with triethylenetetramine in order to obtain MMSCB 3 and 5. New obtained materials were characterized by mass percent gain, concentration of amine groups, FTIR, and elemental analysis. MMSCB 3 and 5 showed mass percent gain of 19.9 and 57.1%, concentration of amine groups of 2.0 and 2.1 mmol/g, and nitrogen content of 5.8 and 4.4%. The capacity of MMSCB 3 and 5 to adsorb Cu(2+), Cd(2+), and Pb(2+) from aqueous single metal ion solutions was evaluated at different contact times, pHs, and initial metal ion concentrations. Adsorption isotherms were well fitted by Langmuir model. Maximum adsorption capacities of MMSCB 3 and 5 for Cu(2+), Cd(2+), and Pb(2+) were found to be 59.5 and 69.4, 86.2 and 106.4, 158.7 and 222.2 mg/g, respectively.

Modeling the effect of surface heterogeneity in equilibrium of heavy metal ion biosorption by using the ion exchange model

This paper is focused on the theoretical modeling of the heavy metal ions biosorption process. The origin of the commonly observed, so-called "heterogeneity effects" has been explained. Two popular models were considered for that purpose: the adsorption model and the ion exchange model. The Condensation Approximation method has been used to develop the model describing the influence of surface heterogeneity on biosorption equilibria. As this model has been derived by accepting the ion exchange processes on the biosorbent surface, the obtained expressions are able to also take into account the pH effect. The mentioned "heterogeneity effects" may be treated as the result of (i) the existence of the continuous function expressing the binding site heterogeneity, (ii) the existence of a few different kinds of binding sites, having different values of ion exchange constant; (iii) stoichiometry of the ion exchange reaction occurring on the biosorbent surface. The latter case is responsible for the so-called "apparent" heterogeneity, when the adsorption model and the ion exchange model offer equally good fits of data but the degree of the surface heterogeneity estimated in this way might be different.

Copper accumulation and toxicity in fluvial periphyton: the influence of exposure history

Periphyton communities have a good bioaccumulation capacity and can be used to monitor metal pollution in fluvial ecosystems. Depending on the dose and exposure time, metals may produce changes in the structure and function of these communities, thus it is expected that the kinetics of metal accumulation and metal sensitivity will also be influenced by the exposure history. In this study, the effects of pulsed and continuous Cu exposures during the colonization of the communities were investigated under controlled conditions. This investigation includes the study of metal accumulation kinetics and the evaluation of community tolerance. Pulsed copper exposure did not affect the community structure but influenced the accumulation kinetics (decreasing intracellular copper uptake). On the other hand, continuous copper exposure caused a huge increase in metal content (both total and intracellular) and modified the structure of the community (increasing the percentage of cyanobacteria and diatom diversity). Both pulsed and continuous periphyton metal exposure may have negative repercussions for the fluvial ecosystem. While Cu pulsed exposure may be toxic to periphyton communities, continuous exposures may lead to community adaptation, which is often related to changes in species composition and higher metal contents being transferred to higher trophic levels of the stream food chain.

Metal accumulation by stream bryophytes, related to chemical speciation

Metal accumulation by aquatic bryophytes was investigated using data for headwater streams of differing chemistry. The Windermere Humic Aqueous Model (WHAM) was applied to calculate chemical speciation, including competitive proton and metal interactions with external binding sites on the plants. The speciation modelling approach gives smaller deviations between observed and predicted bryophyte contents of Cu, Zn, Cd and Pb than regressions based on total filtered metal concentrations. If all four metals, and Ni, are considered together, the WHAM predictions are superior at the 1% level. Optimised constants for bryophyte binding by the trace metals are similar to those for humic substances and simple carboxylate ligands. Bryophyte contents of Na, Mg and Ca are approximately explained by binding at external sites, while most of the K is intracellular. Oxide phases account for some of the Al, and most of the Mn, Fe and Co.

Use of Algae for Removing Heavy Metal Ions From Wastewater: Progress and Prospects

Many algae have immense capability to sorb metals, and there is considerable potential for using them to treat wastewaters. Metal sorption involves binding on the cell surface and to intracellular ligands. The adsorbed metal is several times greater than intracellular metal. Carboxyl group is most important for metal binding. Concentration of metal and biomass in solution, pH, temperature, cations, anions and metabolic stage of the organism affect metal sorption. Algae can effectively remove metals from multi-metal solutions. Dead cells sorb more metal than live cells. Various pretreatments enhance metal sorption capacity of algae. CaCl2 pretreatment is the most suitable and economic method for activation of algal biomass. Algal periphyton has great potential for removing metals from wastewaters. An immobilized or granulated biomass-filled column can be used for several sorption/desorption cycles with unaltered or slightly decreased metal removal. Langmuir and Freundlich models, commonly used for fitting sorption data, cannot precisely describe metal sorption since they ignore the effect of pH, biomass concentration, etc. For commercial application of algal technology for metal removal from wastewaters, emphasis should be given to: (i) selection of strains with high metal sorption capacity, (ii) adequate understanding of sorption mechanisms, (iii) development of low-cost methods for cell immobilization, (iv) development of better models for predicting metal sorption, (v) genetic manipulation of algae for increased number of surface groups or over expression of metal binding proteins, and (vi) economic feasibility.

Review on the Removal of Metal Ions from Effluents Using Seaweeds, Alginate Derivatives and Other Sorbents

Biosorbents, especially those derived from seaweed (macroscopic algae) and alginate derivatives, exhibit high affinity for many metal ions. Because biosorbents are widely abundant (usually biodegradable) and less expensive than industrial synthetic adsorbents, they hold great potential for the removal of toxic metals from industrial effluents. Various studies have demonstrated the efficiency of living and non-living micro-organisms, such as bacteria, yeasts, moulds, micro-algae, cyanobacteria and biomass from water treatment sewage to remove metals from solution. Several types of organic and inorganic biomass have also been used as sorbent materials. In addition, by-products from the forestry industry, as well as agriculture waste and natural sorbents, have also been studied. This paper reviews and summarizes some key recent developments in these areas and it describes and discusses some specific applications of selected natural sorbents.