Inactivation of bacteriophages via photosensitization of fullerol nanoparticles

An Overview of Diverse Strategies To Inactivate Enterobacteriaceae-Targeting Bacteriophages

Bacteriophages are viruses that infect bacteria and thus threaten industrial processes relying on the production executed by bacterial cells. Industries bear huge economic losses due to such recurring and resilient infections. Depending on the specificity of the process, there is a need for appropriate methods of bacteriophage inactivation, with an emphasis on being inexpensive and high efficiency. In this review, we summarize the reports on antiphagents, i.e., antibacteriophage agents on inactivation of bacteriophages. We focused on bacteriophages targeting the representatives of the Enterobacteriaceae family, as its representative, Escherichia coli, is most commonly used in the bio-industry. The review is divided into sections dealing with bacteriophage inactivation by physical factors, chemical factors, and nanotechnology-based solutions.

Photoactive Parietin-loaded nanocarriers as an efficient therapeutic platform against triple-negative breast cancer

The application of photodynamic therapy has become more and more important in combating cancer. However, the high lipophilic nature of most photosensitizers limits their parenteral administration and leads to aggregation in the biological environment. To resolve this problem and deliver a photoactive form, the natural photosensitizer parietin (PTN) was encapsulated in poly(lactic-co-glycolic acid) nanoparticles (PTN NPs) by emulsification diffusion method. PTN NPs displayed a size of 193.70 nm and 157.31 nm, characterized by dynamic light scattering and atomic force microscopy, respectively. As the photoactivity of parietin is essential for therapy, the quantum yield of PTN NPs and the in vitro release were assessed. The antiproliferative activity, the intracellular generation of reactive oxygen species, mitochondrial potential depolarization, and lysosomal membrane permeabilization were evaluated in triple-negative breast cancer cells (MDA-MB-231 cells). At the same time, confocal laser scanning microscopy (CLSM) and flow cytometry were used to investigate the cellular uptake profile. In addition, the chorioallantoic membrane (CAM) was employed to evaluate the antiangiogenic effect microscopically. The spherical monomodal PTN NPs show a quantum yield of 0.4. The biological assessment on MDA-MB-231 cells revealed that free PTN and PTN NPs inhibited cell proliferation with IC50 of 0.95 µM and 1.9 µM at 6 J/cm2, respectively, and this can be attributed to the intracellular uptake profile as proved by flow cytometry. Eventually, the CAM study illustrated that PTN NPs could reduce the number of angiogenic blood vessels and disrupt the vitality of xenografted tumors. In conclusion, PTN NPs are a promising anticancer strategy in vitro and might be a tool for fighting cancer in vivo.

The debatable role of singlet oxygen in persulfate-based advanced oxidation processes

Singlet oxygen (¹O₂) attracts much attention in persulfate-based advanced oxidation processes (PS-AOPs), because of its wide pH tolerance and high selectivity toward electron-rich organics. However, there are conflicts about the ¹O₂ role in PS-AOPs on several aspects, including the formation of different key reactive oxygen species (ROS) at similar active sites, pH dependence, broad-spectrum activity, and selectivity in the elimination of organic pollutants. To a large degree, these conflicts root in the drawbacks of the methods to identify and evaluate the role of ¹O₂. For example, the quenchers of ¹O₂ have high reactivity to other ROS and persulfate as well. In addition, electron transfer process (ETP) also selectively oxidizes organics, having a misleading effect on the identification of ¹O₂. Therefore, in this review, we summarized and discussed some basic properties of ¹O₂, the debatable role of ¹O₂ in PS-AOPs on multiple aspects, and the methods and their drawbacks to identify and evaluate the role of ¹O₂. On the whole, this review aims to better understand the role of ¹O₂ in PS-AOPs and further help with its reasonable utilization.

Sintered and 3D-Printed Bulks of MgB2-Based Materials with Antimicrobial Properties

Pristine high-density bulk disks of MgB₂ with added hexagonal BN (10 wt.%) were prepared using spark plasma sintering. The BN-added samples are machinable by chipping them into desired geometries. Complex shapes of different sizes can also be obtained by the 3D printing of polylactic acid filaments embedded with MgB₂ powder particles (10 wt.%). Our present work aims to assess antimicrobial activity quantified as viable cells (CFU/mL) vs. time of sintered and 3D-printed materials. In vitro antimicrobial tests were performed against the bacterial strains Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853, Staphylococcus aureus ATCC 25923, Enterococcus faecium DSM 13590, and Enterococcus faecalis ATCC 29212; and the yeast strain Candida parapsilosis ATCC 22019. The antimicrobial effects were found to depend on the tested samples and microbes, with E. faecium being the most resistant and E. coli the most susceptible.

Virus Removal and Inactivation Mechanisms during Iron Electrocoagulation: Capsid and Genome Damages and Electro-Fenton Reactions

Virus destabilization and inactivation are critical considerations in providing safe drinking water. We demonstrate that iron electrocoagulation simultaneously removed (via sweep flocculation) and inactivated a non-enveloped virus surrogate (MS2 bacteriophage) under slightly acidic conditions, resulting in highly effective virus control (e.g., 5-logs at 20 mg Fe/L and pH 6.4 in 30 min). Electrocoagulation simultaneously generated H₂O₂ and Fe(II) that can potentially trigger electro-Fenton reactions to produce reactive oxygen species such as ^•OH and high valent oxoiron(IV) that are capable of inactivating viruses. To date, viral attenuation during water treatment has been largely probed by evaluating infective virions (as plaque forming units) or genomic damage (via the quantitative polymerase chain reaction). In addition to these existing means of assessing virus attenuation, a novel technique of correlating transmission electron micrographs of electrocoagulated MS2 with their computationally altered three-dimensional electron density maps was developed to provide direct visual evidence of capsid morphological damages during electrocoagulation. The majority of coliphages lost at least 10-60% of the capsid protein missing a minimum of one of the 5-fold and two of 3- and 2-fold regions upon electrocoagulation, revealing substantial localized capsid deformation. Attenuated total reflectance-Fourier transform infrared spectroscopy revealed potential oxidation of viral coat proteins and modification of their secondary structures that were attributed to reactive oxygen species. Iron electrocoagulation simultaneously disinfects and coagulates non-enveloped viruses (unlike conventional coagulation), adding to the robustness of multiple barriers necessary for public health protection and appears to be a promising technology for small-scale distributed water treatment.

Antimicrobial Photodynamic Approach in the Inactivation of Viruses in Wastewater: Influence of Alternative Adjuvants

Pathogenic viruses are frequently present in marine and estuarine waters, due to poor wastewater (WW) treatments, which consequently affect water quality and human health. Chlorination, one of the most common methods used to ensure microbiological safety in tertiarily treated effluents, may lead to the formation of toxic chemical disinfection by-products on reaction with organic matter present in the effluents. Antimicrobial photodynamic therapy (aPDT) can be a promising disinfecting approach for the inactivation of pathogens, without the formation of known toxic by-products. Additionally, some studies have reported the potentiator effect on aPDT of some compounds, such as potassium iodide (KI) and hydrogen peroxide (H2O2). In the present study, the aPDT efficiency of a PS formulation constituted of five cationic porphyrins (Form) in the inactivation of E. coli T4-like bacteriophage, a model of mammalian viruses, in different aqueous matrices with different organic matter content, was evaluated. Photoinactivation studies were performed at different concentrations of Form and in the presence of the adjuvants KI and H2O2. The results showed that the efficiency of bacteriophage photoinactivation is correlated with the Form concentration, the amount of the organic matter in WW, and the adjuvant type. Form can be an effective alternative to controlling viruses in WW, particularly if combined with H2O2, allowing to significantly reduce PS concentration and treatment time. When combined with KI, the Form is less effective in inactivating T4-like bacteriophage in WW.

Antiviral application of colloidal and immobilized silver nanoparticles

This study explored the application of colloidal and immobilized silver nanoparticles (AgNPs) for inactivation of bacteriophages. Coliphages that are commonly used as indicators for enteric viruses, were used in this study. Colloidal AgNPs were synthesized via a chemical reduction approach using sodium borohydride as reducing agent and trisodium citrate as stabilizing agent. AgNP-immobilized glass substrate was prepared by immobilizing AgNPs on amine-functionalized glass substrate by post-immobilization method. The AgNP-immobilized glass substrate was also tested so as to minimize the release of AgNPs in the treated water. The characterization of AgNPs and the AgNP-immobilized glass surface was done using field emission gun-transmission electron microscopy and scanning electron microscopy. Studies conducted with varying concentrations of colloidal AgNPs displayed good antiviral activity for MS2 and T4 bacteriophage. Colloidal AgNPs at a dose of 60 μg ml^-1 could completely inactivate MS2 and T4 bacteriophage within 30 and 50 min with an initial concentration of 10³ PFU ml^-1. Contaminated water (100 ml) in an unstirred batch reactor with an initial bacteriophage concentration of 10³ PFU ml^-1 could be inactivated by the AgNP-immobilized glass substrate (1 cm × 1 cm, containing 3.7 μg cm^-2 silver) suspended centrally in the batch reactor. Complete 3-Log bacteriophage inactivation was achieved within 70 and 80 min for MS2 and T4 bacteriophage, respectively, while the aqueous silver concentration was less than 25 μg l^-1. This is significantly lower than the recommended standard for silver in drinking water (i.e. 100 μg l^-1, US EPA). Thus, AgNP-immobilized glass may have good potential for generating virus-free drinking water.

Carbon dots for effective photodynamic inactivation of virus

The antiviral function of carbon dots (CDots) with visible light exposure was evaluated, for which the model bacteriophages MS2 as a surrogate of small RNA viruses were used. The results show clearly that the visible light-activated CDots are highly effective in diminishing the infectivity of MS2 in both low and high titer samples to the host E. coli cells, and the antiviral effects are dot concentration- and treatment time-dependent. The action of CDots apparently causes no significant damage to the structural integrity and morphology of the MS2 phage or the breakdown of the capsid proteins, but does result in the protein carbonylation (a commonly used indicator for protein oxidation) and the degradation of viral genomic RNA. Mechanistically the results may be understood in the framework of photodynamic effects that are associated with the unique excited state properties and processes of CDots. Opportunities for potentially broad applications of CDots coupled with visible/natural light in the prevention and control of viral transmission and spread are highlighted and discussed.

The antiviral function of carbon dots (CDots) with visible light exposure was evaluated, for which the model bacteriophages MS2 as a surrogate of small RNA viruses were used.

First Report on Photodynamic Inactivation of Archaea Including a Novel Method for High-Throughput Reduction Measurement

Archaea are considered third, independent domain of living organisms besides eukaryotic and bacterial cells. To date, no report is available of photodynamic inactivation (PDI) of any archaeal cells. Two commercially available photosensitizers (SAPYR and TMPyP) were used to investigate photodynamic inactivation of Halobacterium salinarum. In addition, a novel high-throughput method was tested to evaluate microbial reduction in vitro. Due to the high salt content of the culture medium, the physical and chemical properties of photosensitizers were analyzed via spectroscopy and fluorescence-based DPBF assays. Attachment or uptake of photosensitizers to or in archaeal cells was investigated. The photodynamic inactivation of Halobacterium salinarum was evaluated via growth curve method allowing a high throughput of samples. The presented results indicate that the photodynamic mechanisms are working even in high salt environments. Either photosensitizer inactivated the archaeal cells with a reduction of 99.9% at least. The growth curves provided a fast and precise measurement of cell viability. The results show for the first time that PDI can kill not only bacterial cells but also robust archaea. The novel method for generating high-throughput growth curves provides benefits for future research regarding antimicrobial substances in general.

Response of the Intertidal Microbial Community Structure and Metabolic Profiles to Zinc Oxide Nanoparticle Exposure

The toxicity of nanomaterials to microorganisms is related to their dose and environmental factors. The aim of this study was to investigate the shifts in the microbial community structure and metabolic profiles and to evaluate the environmental factors in a laboratory scale intertidal wetland system exposed to zinc oxide nanoparticles (ZnO NPs). Microbial assemblages were determined using 16S rRNA high-throughput sequencing. Community-level physiological profiles were determined using Biolog-ECO technology. Results showed Proteobacteria was the predominant (42.6%–55.8%) phylum across all the sediments, followed by Bacteroidetes (18.9%–29.0%). The genera Azoarcus, Maribacter, and Thauera were most frequently detected. At the studied concentrations (40 mg·L⁻¹, 80 mg·L⁻¹, 120 mg·L⁻¹), ZnO NPs had obvious impacts on the activity of Proteobacteria. Adverse effects were particularly evident in sulfur and nitrogen cycling bacteria such as Sulfitobacter, unidentified_Nitrospiraceae, Thauera, and Azoarcus. The alpha diversity index of microbial community did not reflect stronger biological toxicity in the groups with high NP concentrations (80 mg·L⁻¹, 120 mg·L⁻¹) than the group with low NP concentration (40 mg·L⁻¹). The average well color development (AWCD) values of periodically submersed groups were higher than those of long-term submersed groups. The group with NP concentration (40 mg·L⁻¹) had the lowest AWCD value; those of the groups with high NP concentrations (80 mg·L⁻¹, 120 mg·L⁻¹) were slightly lower than that of the control group. The beta diversity showed that tidal activity shaped the similar microbial community among the periodically submerged groups, as well as the long-term submerged groups. The groups with high DO concentrations had higher diversity of the microbial community, better metabolic ability, and stronger resistance to ZnO NPs than the groups with a low DO concentration.

Nanomaterials for removal of waterborne pathogens

As the nanotechnological applications have taken over in different fields, their applications for water and wastewater treatment is also surfacing as a fast-developing and very promising area. Recent advancements in nanotechnological science and engineering advise that many of the waterborne pathogens could be culminated or debilitated using nanobiosorbents, nanocatalysts, bioactive nanoparticles, nanostructured catalytic membranes, nanobioreactors, nanoparticle-enhanced filtration among other products, and processes resulting from the development of nanotechnology. A detailed insight has been provided for advanced techniques such as photochemical (photocatalytic and advanced oxidation processes) applications of metal oxide nanoparticles, nanomembrane technology, bioinspired nanomaterials, and nanotechnological innovations (nano-Ag, fullerenes, nanotubes, and molecularly imprinted polymers, etc.), which prove to be highly potential as well as promising and cost-effective. However, there are still some shortcomings and challenges that must be overcome which will be looked upon in this chapter.

Trends and targets in antiviral phototherapy

Photodynamic therapy (PDT) is a well-established treatment option in the treatment of certain cancerous and pre-cancerous lesions. Though best-known for its application in tumor therapy, historically the photodynamic effect was first demonstrated against bacteria at the beginning of the 20^th century. Today, in light of spreading antibiotic resistance and the rise of new infections, this photodynamic inactivation (PDI) of microbes, such as bacteria, fungi, and viruses, is gaining considerable attention. This review focuses on the PDI of viruses as an alternative treatment in antiviral therapy, but also as a means of viral decontamination, covering mainly the literature of the last decade. The PDI of viruses shares the general action mechanism of photodynamic applications: the irradiation of a dye with light and the subsequent generation of reactive oxygen species (ROS) which are the effective phototoxic agents damaging virus targets by reacting with viral nucleic acids, lipids and proteins. Interestingly, a light-independent antiviral activity has also been found for some of these dyes. This review covers the compound classes employed in the PDI of viruses and their various areas of use. In the medical area, currently two fields stand out in which the PDI of viruses has found broader application: the purification of blood products and the treatment of human papilloma virus manifestations. However, the PDI of viruses has also found interest in such diverse areas as water and surface decontamination, and biosafety.

Antiaflatoxigenic effect of fullerene C60 nanoparticles at environmentally plausible concentrations

Increased interest in fullerene C₆₀ and derivatives in recent years implies an intensification of their environmental spread. Yet, the potential risks for living organisms are largely unknown, including the interaction of C₆₀ with fungal organisms. This may be especially relevant for mycotoxigenic fungi since C₆₀ may both scavenge and produce reactive oxygen species (ROS), and oxidative stress induces mycotoxin production in fungi. Therefore, this study examined effects of environmentally plausible concentrations of C₆₀ (0, 10, 50, and 100 ng/mL) on Aspergillus flavus growth and aflatoxin production in culture media. In addition, ROS-dependent oxidative stress biomarkers—thiobarbituric acid reactive substances (TBARS), reduced and oxidised glutathione ratio, superoxide dismutase isoenzymes, catalase, glutathione peroxidase, and glutathione reductase were determined in mycelia. Nanoparticles of fullerene C₆₀ (nC₆₀) did not exhibit strong antifungal activity against A. flavus. At the same time, nC₆₀ caused an antiaflatoxigenic effect at 10–100 ng/mL, and 50 ng/mL unexpectedly enhanced aflatoxin production. The TBARS content, reduced and oxidised glutathione ratio, and copper, zinc superoxide dismutase activity suggest that 10 ng/mL nC₆₀ exerted antioxidative action and reduced aflatoxin B1 production within fungal cells. Detected prooxidative effects of 50 ng/mL fullerene exceeded cellular defenses and consequently enhanced aflatoxin B1 production. Finally, the results obtained with 100 ng/mL nC₆₀ point to prooxidative effects, but the absence of increase in aflatoxin output may indicate additional, presumably cytotoxic effects of nC₆₀. Thus, a range of rather low levels of nC₆₀ in the environment has a potential to modify aflatoxin production in A. flavus. Due to possible implications, further studies should test these results in environmental conditions.

Review on the Antimicrobial Properties of Carbon Nanostructures

Swift developments in nanotechnology have prominently encouraged innovative discoveries across many fields. Carbon-based nanomaterials have emerged as promising platforms for a broad range of applications due to their unique mechanical, electronic, and biological properties. Carbon nanostructures (CNSs) such as fullerene, carbon nanotubes (CNTs), graphene and diamond-like carbon (DLC) have been demonstrated to have potent broad-spectrum antibacterial activities toward pathogens. In order to ensure the safe and effective integration of these structures as antibacterial agents into biomaterials, the specific mechanisms that govern the antibacterial activity of CNSs need to be understood, yet it is challenging to decouple individual and synergistic contributions of physical, chemical and electrical effects of CNSs on cells. In this article, recent progress in this area is reviewed, with a focus on the interaction between different families of carbon nanostructures and microorganisms to evaluate their bactericidal performance.

Fullerol C60(OH)24 nanoparticles and mycotoxigenic fungi: a preliminary investigation into modulation of mycotoxin production

Increased use of fullerols in various fields and expected increase of their environmental spread impose the necessity for testing fullerol nanoparticles (FNP) effects on microbiota. There is little information available on the interaction of mycotoxigenic fungi and FNP, despite FNP having a great potential of modifying mycotoxin production. Namely, FNP exhibit both ROS-quenching and ROS-producing properties, while oxidative stress stimulates mycotoxin synthesis in the fungi. In order to shed some light on the extent of interaction between FNP and mycotoxigenic fungi, the effects of fullerol C₆₀(OH)₂₄ nanoparticles (10, 100, 1000 ng/mL) on mycelial growth, aflatoxin production and oxidative stress modulation in an aflatoxigenic strain of Aspergillus flavus (NRRL 3251) during 168 h of incubation in a liquid culture medium were examined. FNP slightly reduced mycelial biomass weight, but significantly decreased aflatoxin concentration in media. Lipid peroxide content, superoxide dismutase, catalase and glutathione peroxidase activities suggest that FNP treatments hormetically reduced oxidative stress within fungal cells in turn suppressing aflatoxin production. These findings contribute to the assessment of environmental risk and application potential of fullerols.

Photochemical reactivity of aqueous fullerene clusters: C60 versus C70

Over the past few years, there has been a strong interest in exploring the potential impact of fullerenes in the environment. Despite that both C₆₀ and C₇₀ have been detected in environmental matrices, the research on the impact of higher fullerenes, such as C_70, has been largely missing. This study evaluated and compared the phototransformation of aqueous C₆₀ and C₇₀ clusters (nC₆₀ and nC₇₀) and their ¹O₂ production under sunlight and lamp light irradiation (315nm, 360nm and 420nm). The nC₆₀ and nC₇₀ samples formed by direct mixing with water adopted a face-centered cubic (FCC) crystal structure. The apparent quantum yields (AQYs) of fullerene phototransformed were relatively constant over the examined wavelengths, while ¹O₂ production AQYs decreased with increased wavelengths. The long-term fate studies with outdoor sunlight indicated that both nC₆₀ and nC₇₀ lost considerable organic carbon contents (>80%) in water after ∼8 months of irradiation and that the intermediate photoproducts of nC₆₀ and nC₇₀ exhibited a progressively increased level of oxygen-containing functionalities. Overall, the study indicates that nC₇₀ can be photochemically removed under sunlight conditions and that the photoreactivity of nC₆₀ based on AQYs is greater than that of nC₇₀.

Recent advances in nanomaterials for water protection and monitoring

Nanomaterials (NMs) for adsorption, catalysis, separation, and disinfection are scrutinized. NMs-based sensor technologies and environmental transformations of NMs are highlighted.

Visible Light Sensitized Production of Hydroxyl Radicals Using Fullerol as an Electron-Transfer Mediator

Fullerenes and their derivatives are known to photosensitize the production of singlet oxygen (¹O₂), but their role in generating hydroxyl radical (^•OH) under visible light has not been reported. Here, we demonstrate that fullerol can mediate the electron transfer from Rhodamine B dye to O₂ under visible light irradiation, achieving simultaneous dye decolorization and ^•OH-induced degradation of 4-chlorophenol. The hydroxyl radical is proposed to be produced via a consecutive reduction of molecular oxygen by fullerol anion radical, which is formed through the electron transfer from the dye to the triplet state of fullerol. Mechanistic investigations using various probe reagents such as superoxide dismutase (superoxide quencher), t-butanol (^•OH quencher), and coumarin (^•OH probe) provided indirect evidence for the generation of ^•OH under visible light. Furthermore, spin trapping technique directly detected the oxidizing species such as ^•OH, HO₂^•, and ¹O₂ in the visible light irradiated solution of RhB/fullerol mixture. It was proposed that the photochemical oxidation mechanism depends on pH: ^•OH production is favored at acidic pH through fullerol-mediated sequential electron transfer while ¹O₂ is generated as a main oxidant at neutral and alkaline condition through the energy-transfer process. Therefore, the photochemical oxidation can be switchable between ^•OH-driven and ¹O₂-driven mechanism by a simple pH adjustment.

Carbon Nanomaterials as Antibacterial Colloids

Carbon nanomaterials like graphene, carbon nanotubes, fullerenes and the various forms of diamond have attracted great attention for their vast potential regarding applications in electrical engineering and as biomaterials. The study of the antibacterial properties of carbon nanomaterials provides fundamental information on the possible toxicity and environmental impact of these materials. Furthermore, as a result of the increasing prevalence of resistant bacteria strains, the development of novel antibacterial materials is of great importance. This article reviews current research efforts on characterizing the antibacterial activity of carbon nanomaterials from the perspective of colloid and interface science. Building on these fundamental findings, recent functionalization strategies for enhancing the antibacterial effect of carbon nanomaterials are described. The review concludes with a comprehensive outlook that summarizes the most important discoveries and trends regarding antibacterial carbon nanomaterials.

Facile Synthesis of Photofunctional Nanolayer Coatings on Titanium Substrates

We developed a two-step chemical bonding process using photosensitizer molecules to fabricate photofunctional nanolayer coatings on hematoporphyrin- (HP-) coated Ti substrates. In the first step, 3-aminopropyltriethoxysilane was covalently functionalized onto the surface of the Ti substrates to provide heterogeneous sites for immobilizing the HP molecules. Then, HP molecules with carboxyl groups were chemically attached to the amine-terminated nanolayer coatings via a carbodiimide coupling reaction. The microstructure and elemental and phase composition of the HP-coated Ti substrates were investigated using field-emission scanning electron microscopy and energy-dispersive X-ray spectrometry. The photophysical properties of the photofunctional nanolayer coatings were confirmed using reflectance ultraviolet-visible absorption and emission spectrophotometry. The singlet oxygen generation efficiency of the photofunctional nanolayer coatings was determined using the decomposition reaction of 1,3-diphenylisobenzofuran. The HP-coated Ti substrates exhibited good biocompatibility without any cytotoxicity, and these nanolayer coatings generated singlet oxygen, which can kill microorganisms using only visible light.

Sunlight inactivation of somatic coliphage in the presence of natural organic matter

Long wavelengths of sunlight spectrum (UVA and visible light), as well as natural organic matter (NOM) are important environmental factors affecting survival of viruses in aquatic environment through direct and indirect inactivation. In order to understand the virus inactivation kinetics under such conditions, this study investigated the effects of Suwannee River natural organic matter (NOM) on the inactivation of a somatic coliphage, phiX174, by UVA and visible light. Experiments were carried out to examine the virucidal effects of UVA/visible light, assess the influence of SRNOM at different concentrations, and identify the effective ROS in virus inactivation. The results from this study showed that the presence of NOM could either enhance virus inactivation or reduce virus inactivation depending on the concentration, where the inactivation rate followed a parabolic relationship against NOM concentration. The results indicated that moderate levels of NOM (11 ppm) had the strongest antiviral activity, while very low or very high NOM concentrations prolonged virus survival. The results also showed that OH▪ was the primary ROS in causing phiX174 (ssDNA virus) inactivation, unlike previous findings where (1)O2 was the primary ROS causing MS2 (ssRNA virus) inactivation. The phiX174 inactivation by OH∙ could be described as k=3.7 ✕ 10(13)[OH∙]+1.404 (R(2)=0.8527).

Singlet-Oxygen Generation in Alkaline Periodate Solution

A nonphotochemical generation of singlet oxygen ((1)O2) using potassium periodate (KIO4) in alkaline condition (pH > 8) was investigated for selective oxidation of aqueous organic pollutants. The generation of (1)O2 was initiated by the spontaneous reaction between IO4(-) and hydroxyl ions, along with a stoichiometric conversion of IO4(-) to iodate (IO3(-)). The reactivity of in-situ-generated (1)O2 was monitored by using furfuryl alcohol (FFA) as a model substrate. The formation of (1)O2 in the KIO4/KOH system was experimentally confirmed using electron spin resonance (ESR) measurements in corroboration with quenching studies using azide as a selective (1)O2 scavenger. The reaction in the KIO4/KOH solution in both oxic and anoxic conditions initiated the generation of superoxide ion as a precursor of the singlet oxygen (confirmed by using superoxide scavengers), and the presence of molecular oxygen was not required as a precursor of (1)O2. Although hydrogen peroxide had no direct influence on the FFA oxidation process, the presence of natural organic matter, such as humic and fulvic acids, enhanced the oxidation efficiency. Using the oxidation of simple organic diols as model compounds, the enhanced (1)O2 formation is attributed to periodate-mediated oxidation of vicinal hydroxyl groups present in humic and fulvic constituent moieties. The efficient and simple generation of (1)O2 using the KIO4/KOH system without any light irradiation can be employed for the selective oxidation of aqueous organic compounds under neutral and near-alkaline conditions.

Aspergilli Response to Benzalkonium Chloride and Novel-Synthesized Fullerenol/Benzalkonium Chloride Nanocomposite

A comprehensive comparative analysis of antifungal potential of benzalkonium chloride and newly synthesized fullerenol/benzalkonium chloride nanocomposite was conducted to assess the possible impact of carbon-based nanocarrier on antimicrobial properties of the commonly used biocide. Physical characterization of synthesized nanocomposite showed zeta potential of +37.4 mV and inhomogeneous particles size distribution, with nanocomposite particles' dimensions within 30-143 nm and maximum number of particles at 44 nm. The effect of pure and fullerenol nanocarrier-bound biocide was evaluated in eight Aspergillus species. In mycelial growth assay, nanocomposite was more potent, as fungicidal effect of 1.04/0.6 μg mL(-1) was obtained in all but one of the isolates (A. niger), while proportional concentration of pure biocide (0.6 μg mL(-1)) completely inhibited mycelial growth of only three Aspergillus species. However, conidia appear to be less susceptible to nanocomposite treatment, as lower fungistatic (MIC) and fungicidal (MFC) concentrations were obtained with biocide alone (MIC in range from 0.03 to 0.15 μg mL(-1) and MFC from 0.075 to 0.45 μg mL(-1)). To a different degree, both substances stimulated aflatoxin B1 production and inhibited ochratoxin A synthesis. Very low mycelium biomass yield, in range from 1.0 to 3.0 mg dry weight, was documented in both biocide and nanocomposite enriched medium.

Highly bactericidal Ag nanoparticle films obtained by cluster beam deposition

The recent emergence of bacterial pathogens resistant to most or all available antibiotics is among the major global public health problems. As indirect transmission through contaminated surfaces is a main route of dissemination for most of such pathogens, the implementation of effective antimicrobial surfaces has been advocated as a promising approach for their containment, especially in the hospital settings. However, traditional wet synthesis methods of nanoparticle-based antimicrobial materials leave a number of key points open for metal surfaces: such as adhesion to the surface and nanoparticle coalescence. Here we demonstrate an alternative route, i.e. supersonic cluster beam deposition, to obtain antimicrobial Ag nanoparticle films deposited directly on surfaces. The synthesized films are simple to produce with controlled density and thickness, are stable over time, and are shown to be highly bactericidal against major Gram positive and Gram negative bacterial pathogens, including extensively drug-resistant strains.

FROM THE CLINICAL EDITOR

The use of silver nanoparticle in health care is getting more widespread. The authors here describe the technique of cluster beam deposition for spraying silver on surfaces used in health care sectors. This may open a new avenue for future anti-bacterial coatings.

Quaternary ammonium polyethylenimine nanoparticles for treating bacterial contaminated water

This study highlights the potential application of antimicrobial quaternary ammonium nanomaterials for water disinfection. Quaternary ammonium polyethylenimine (QA-PEI) nanoparticles (NPs) were synthesized by polyethylenimine crosslinking and alkylation with octyl iodide followed by methyl iodide quaternization. Particles modified with octyldodecyl alkyl chains were also prepared and evaluated. The antimicrobial activity of QA-PEI NPs was studied after anchoring in non-leaching polymeric coatings and also in aqueous suspension. Particles at different loadings (w/w) were embedded in polyethylene vinyl acetate and polyethylene methacrylic acid coatings and tested for antimicrobial activity against four representative strains of bacteria in static and dynamic modes. Coatings embedded with fluorescent labelled particles tracked by Axioscope fluorescence microscope during the antimicrobial test indicates no particles leaching out. Coatings loaded with 5% w/w QA-PEI exhibited strong antibacterial activity. Aqueous suspension was tested and found effective for bacterial decontamination at 0.1 ppm and maintains its activity for several weeks.

Effect of sodium alginate on UVC inactivation of coliphage MS2

Enhancement of UVC inactivation of coliphage MS2 by sodium alginate and its mechanisms through reactive oxygen species (ROS) generation.

Toxicity of nano-TiO2 on algae and the site of reactive oxygen species production

Given the extensive use of nanomaterials, they may enter aquatic environments and harm the growth of algae, which are primary producers in an aquatic ecosystem. Thus, the balance of an aquatic ecosystem may be destroyed. In this study, Karenia brevis and Skeletonema costatum were exposed to nano-TiO2 (anatase, average particle size of 5-10 nm, specific surface area of 210±10 m(2) g(-1)) to assess the effects of nano-TiO2 on algae. The findings of transmission electron microscopy-energy dispersive X-ray spectroscopy (TEM-EDX) and scanning electron microscopy (SEM) demonstrate aggregation of nano-TiO2 in the algal suspension. Nano-TiO2 was also found to be inside algal cells. The growth of the two species of algae was inhibited under nano-TiO2 exposure. The 72 h EC50 values of nano-TiO2 to K. brevis and S. costatum were 10.69 and 7.37 mg L(-1), respectively. TEM showed that the cell membrane of K. brevis was destroyed and its organelles were almost undistinguished under nano-TiO2 exposure. The malondialdehyde (MDA) contents of K. brevis and S. costatum significantly increased compared with those of the control (p<0.05). Meanwhile, superoxide dismutase (SOD) and catalase activities (CAT) of K. brevis and S. costatum changed in different ways. The reactive oxygen species (ROS) levels in both species were significantly higher than those of the control (p<0.05). The site of ROS production and accumulation in K. brevis and S. costatum under nano-TiO2 exposure was explored with the addition of inhibitors of different electron transfer chains. This study indicated that nano-TiO2 in algal suspensions inhibited the growth of K. brevis and S. costatum. This effect was attributed to oxidative stress caused by ROS production inside algal cells. The levels of anti-oxidative enzymes changed, which destroyed the balance between oxidation and anti-oxidation. Thus, algae were damaged by ROS accumulation, resulting in lipid oxidation and inhibited algae growth. The inhibitors of the electron transfer chain showed that the site of ROS production and accumulation in K. brevis cells was the chloroplast.

Inactivation performance and mechanism of Escherichia coli in aqueous system exposed to iron oxide loaded graphene nanocomposites

The challenge to achieve efficient disinfection and microbial control without harmful disinfection byproducts calls for developing new technologies. Magnetic-graphene oxide (M-GO) with magnetic iron oxide nanoparticles well dispersed on graphene oxide (GO) nanosheets exerted excellent antibacterial activity against Escherichia coli. The antibacterial performance of M-GO was dependent on the concentration and the component mass ratio of M/GO. The synergetic antibacterial effect of M-GO was observed with M/GO mass ratio of 9.09. TEM images illustrated the interaction between E. coli cells and M-GO nanocomposites. M-GO nanomaterials were possible to deposit on or penetrate into cells leading to leakage of intercellular contents and loss of cell integrity. The inactivation mechanism of E. coli by M-GO was supposed to result from both the membrane stress and oxidation stress during the incubation period. M-GO with excellent antibacterial efficiency against E. coli and separation-convenient property from water could be potent bactericidal nanomaterials for water disinfection.

Reduction of hydroxylated fullerene (fullerol) in water by zinc: reaction and hemiketal product characterization

Water-soluble, hydroxylated fullerene (fullerol) materials have recently gained increasing attention as they have been identified as the primary product(s) during the exposure of fullerenes (as water stable, nanoscale aggregated C60) to UV light in water. The physical properties and chemical reactivity of resulting fullerols, however, have not been thoroughly studied. In this paper, we identified and characterized the reductive transformation of fullerol (C60(OH)x(ONa)y) by solid zinc metal (Zn(0)) through a series of batch reaction experiments and product characterization, including (13)C NMR, FTIR, XPS, UV-vis, DLS, and TEM. Results indicated the facile formation of water stable, pH sensitive hemiketal functionality as part of a relatively reduced fullerol product. Further, aqueous physical behavior of the product fullerol, as measured by octanol partitioning and surface deposition rates, was observed to significantly differ from the parent material and is consistent with a relative increase in molecular (product) hydrophobicity.

Roles of singlet oxygen and triplet excited state of dissolved organic matter formed by different organic matters in bacteriophage MS2 inactivation

Inactivation of bacteriophage MS2 by reactive oxygen species (ROS) and triplet excited state of dissolved organic matter ((3)DOM*) produced by irradiation of natural and synthetic sensitizers with simulated sunlight of wavelengths greater than 320 nm was investigated. Natural sensitizers included purified DOM isolates obtained from wastewater and river waters, and water samples collected from Singapore River, Stamford Canal, and Marina Bay Reservoir in Singapore. Linear correlations were found between MS2 inactivation rate constants (kobs) and the photo-induced reaction rate constants of 2,4,6-trimethylphenol (TMP), a probe compound shown to react mainly with (3)DOM*. Linear correlations between MS2 kobs and singlet oxygen ((1)O2) concentrations were also found for both purified DOM isolates and natural water samples. These correlations, along with data from quenching experiments and experiments with synthetic sensitizers, Rose Bengal (RB), 3'-methoxyacetophenone (3'-MAP), and nitrite [Formula: see text] , suggest that (1)O2, (3)DOM*, and hydroxyl radicals ((•)OH) could inactivate bacteriophage MS2. Linear correlations between MS2 kobs and Specific Ultraviolet Absorption determined at 254 nm (SUVA254) were also found for both purified DOM isolates and natural samples. These results suggest the potential use of TMP as a chemical probe and SUVA254 as an indicator for virus inactivation in natural and purified DOM water samples.

Stability, metal leaching, photoactivity and toxicity in freshwater systems of commercial single wall carbon nanotubes

Carbon nanotubes (CNTs) are exciting new materials that have been intensively researched and are becoming increasingly used in consumer products. With rapid growth in production and use of CNTs in many applications, there is the potential for emissions to the environment and thus research is needed to assess the risks associated with CNTs in the environment. Here we show that commercial CNTs differ in their stability, photoactivity, metal leachate, and toxicity to freshwater algae. The behavior between raw and purified variants of the CNTs differs considerably; for example purified CNTs are generally more photoactive, producing singlet oxygen and superoxide, while raw CNTs show little or no photoactivity. Residual metal catalysts differ based on synthesis method used to prepare CNTs and thus may be comprised of elements with varying degrees of toxic potential. Influenced by pH and other constituents of the natural waters, our work shows that metals can leach out from all the commercial CNTs studied, even purified versions, albeit at different levels in many natural waters. As much as 10% of the total residual nickel leached from a purified CNT after 72 h. Aqueous concentrations of molybdenum leached from a different purified CNT were nearly 0.060 mg L(-1) after 72 h. With little sample preparation, CNTs are dispersible in most freshwaters and stable for several days. Not all tested CNTs were toxic; for those CNTs that did induce toxicity we show that photoactivity, not metal leaching, contributes to the toxicity of commercial CNTs to freshwater algae, with growth rates significantly reduced by as much as 200%.

Ecotoxicity of nanoparticles

Nanotechnology is a science of producing and utilizing nanosized particles that are measured in nanometers. The unique size-dependent properties make the nanoparticles superior and indispensable as they show unusual physical, chemical, and properties such as conductivity, heat transfer, melting temperature, optical properties, and magnetization. Taking the advantages of these singular properties in order to develop new products is the main purpose of nanotechnology, and that is why it is regarded as "the next industrial revolution." Although nanotechnology is quite a recent discipline, there have already high number of publications which discuss this topic. However, the safety of nanomaterials is of high priority. Whereas toxicity focuses on human beings and aims at protecting individuals, ecotoxicity looks at various trophic organism levels and intend to protect populations and ecosystems. Ecotoxicity includes natural uptake mechanisms and the influence of environmental factors on bioavailability (and thereby on toxicity). The present paper focuses on the ecotoxic effects and mechanisms of nanomaterials on microorganisms, plants, and other organisms including humans.

Involvement of type I and type II mechanisms on the photoinactivation of non-enveloped DNA and RNA bacteriophages

Microbial photodynamic inactivation (PDI), involving the use of a photosensitizer (PS), light and molecular oxygen, with the subsequent production of reactive oxygen species (ROS), has been considered a promising and effective technology for viral inactivation. Although singlet oxygen is generally accepted as the main damaging species in PDI, ROS like free radicals may also be involved in the process, inducing damages to proteins, lipids, nucleic acids and other molecular structures. In this study, the relative importance of each mechanism (type I and type II) on the photoinactivation of non-enveloped DNA (T4-like phage) and RNA (Qβ phage) viruses was evaluated. For this purpose, two cationic porphyrins (Tri-Py(+)-Me-PF and Tetra-Py(+)-Me) and four different ROS scavengers were used. The scavenging effect of sodium azide and L-histidine (singlet oxygen quenchers) and of D-mannitol and L-cysteine (free radical scavengers) was assessed by exposure of both phages (T4-like and Qβ) to each cationic porphyrin (5.0μM for T4-like phage and 0.5μM for Qβ phage) and white light (40Wm(-2)) in the presence of different concentrations of the scavengers (5, 10, 50 and 100mM). Sodium azide and L-histidine gave the best protection, reducing the phototoxic effect of Tri-Py(+)-Me-PF on T4-like phage respectively by 80% and 72% and in the presence of Tetra-Py(+)-Me by 90% and 78%. Free radical scavengers D-mannitol and L-cysteine did not significantly reduce the rate of T4-like phage photoinactivation (around 20% protection, for both PS). The sodium azide protection on Qβ phage photoinactivation, in the presence of Tri-Py(+)-Me-PF, was lower (39%) when compared with T4-like phage. D-mannitol did not exert on Qβ phage any protective effect after 90min of irradiation. The effect of the simultaneous presence of singlet oxygen and free radicals scavengers at 100mM confirmed that singlet oxygen (type II mechanism) is clearly the main ROS involved in T4-like and Qβ phages photoinactivation by these two cationic PS. As RNA-type phages are more easily photoinactivated when compared with DNA-type ones, the protection conferred by the scavengers during the PDI process is lower and this should be taken into account when the main mechanism involved in PDI of different viruses is to be studied.

Recent advances in drinking water disinfection: successes and challenges

Drinking water is the most important single source of human exposure to gastroenteric diseases, mainly as a result of the ingestion of microbial contaminated water. Waterborne microbial agents that pose a health risk to humans include enteropathogenic bacteria, viruses, and protozoa. Therefore, properly assessing whether these hazardous agents enter drinking water supplies, and if they do, whether they are disinfected adequately, are undoubtedly aspects critical to protecting public health. As new pathogens emerge, monitoring for relevant indicator microorganisms (e.g., process microbial indicators, fecal indicators, and index and model organisms) is crucial to ensuring drinking water safety. Another crucially important step to maintaining public health is implementing Water Safety Plans (WSPs), as is recommended by the current WHO Guidelines for Drinking Water Quality. Good WSPs include creating health-based targets that aim to reduce microbial risks and adverse health effects to which a population is exposed through drinking water. The use of disinfectants to inactivate microbial pathogens in drinking water has played a central role in reducing the incidence of waterborne diseases and is considered to be among the most successful interventions for preserving and promoting public health. Chlorine-based disinfectants are the most commonly used disinfectants and are cheap and easy to use. Free chlorine is an effective disinfectant for bacteria and viruses; however, it is not always effective against C. parvum and G. lamblia. Another limitation of using chlorination is that it produces disinfection by-products (DBPs), which pose potential health risks of their own. Currently, most drinking water regulations aggressively address DBP problems in public water distribution systems. The DBPs of most concern include the trihalomethanes (THMs), the haloacetic acids (HAAs), bromate, and chlorite. However, in the latest edition of the WHO Guidelines for Drinking Water Quality, it is recommended that water disinfection should never be compromised by attempting to control DBPs. The reason for this is that the risks of human illness and death from pathogens in drinking water are much greater than the risks from exposure to disinfectants and disinfection by-products. Nevertheless, if DBP levels exceed regulatory limits, strategies should focus on eliminating organic impurities that foster their formation, without compromising disinfection. As alternatives to chlorine, disinfectants such as chloramines, ozone, chlorine dioxide, and UV disinfection are gaining popularity. Chlorine and each of these disinfectants have individual advantage and disadvantage in terms of cost, efficacy-stability, ease of application, and nature of disinfectant by-products (DBPs). Based on efficiency, ozone is the most efficient disinfectant for inactivating bacteria, viruses, and protozoa. In contrast, chloramines are the least efficient and are not recommended for use as primary disinfectants. Chloramines are favored for secondary water disinfection, because they react more slowly than chlorine and are more persistent in distribution systems. In addition, chloramines produce lower DBP levels than does chlorine, although microbial activity in the distribution system may produce nitrate from monochloramine, when it is used as a residual disinfectant, Achieving the required levels of water quality, particularly microbial inactivation levels, while minimizing DBP formation requires the application of proper risk and disinfection management protocols. In addition, the failure of conventional treatment processes to eliminate critical waterborne pathogens in drinking water demand that improved and/or new disinfection technologies be developed. Recent research has disclosed that nanotechnology may offer solutions in this area, through the use of nanosorbents, nanocatalysts, bioactive nanoparticles, nanostructured catalytic membranes, and nanoparticle-enhanced filtration.

Selective oxidative degradation of organic pollutants by singlet oxygen-mediated photosensitization: tin porphyrin versus C60 aminofullerene systems

This study evaluates the potential application of tin porphyrin- and C(60) aminofullerene-derivatized silica (SnP/silica and aminoC(60)/silica) as (1)O(2) generating systems for photochemical degradation of organic pollutants. Photosensitized (1)O(2) production with SnP/silica, which was faster than with aminoC(60)/silica, effectively oxidized a variety of pharmaceuticals. Significant degradation of pharmaceuticals in the presence of the 400-nm UV cutoff filter corroborated visible light activation of both photosensitizers. Whereas the efficacy of aminoC(60)/silica for (1)O(2) production drastically decreased under irradiation with λ > 550 nm, Q-band absorption caused negligible loss of the photosensitizing activity of SnP/silica in the long wavelength region. Faster destruction of phenolates by SnP/silica and aminoC(60)/silica under alkaline pH conditions further implicated (1)O(2) involvement in the oxidative degradation. Direct charge transfer mediated by SnP, which was inferred from nanosecond laser flash photolysis, induced significant degradation of neutral phenols under high power light irradiation. Self-sensitized destruction caused gradual activity loss of SnP/silica in reuse tests unlike aminoC(60)/silica. The kinetic comparison of SnP/silica and TiO(2) photocatalyst in real wastewater effluents showed that photosensitized singlet oxygenation of pharmaceuticals was still efficiently achieved in the presence of background organic matters, while significant interference was observed for photocatalyzed oxidation involving non-selective OH radical.

Effects of humic acid and electrolytes on photocatalytic reactivity and transport of carbon nanoparticle aggregates in water

The effects of naturally occurring macromolecules such as humic acid (HA) and electrolytes on four fullerene nanoparticle suspensions (i.e., C(60), C(60)(OH)(24), single- and multiwall carbon nanotubes) were explored with respect to: (1) characteristics of nanoparticle aggregates, (2) transport of the aggregates through a silica porous media, and (3) production of reactive oxygen species (ROS) from the photosensitized fullerene aggregates. The presence of HA and salts increased the size of aggregates and relative hydrophobicity associated with transport through silica beads, while decreasing ROS production. These data illustrate the importance that transformation of engineered nanomaterials (ENMs) through interactions with aquatic solutes may have in altering the environmental behavior of nanomaterials.

Photodynamic inactivation of mammalian viruses and bacteriophages

Photodynamic inactivation (PDI) has been used to inactivate microorganisms through the use of photosensitizers. The inactivation of mammalian viruses and bacteriophages by photosensitization has been applied with success since the first decades of the last century. Due to the fact that mammalian viruses are known to pose a threat to public health and that bacteriophages are frequently used as models of mammalian viruses, it is important to know and understand the mechanisms and photodynamic procedures involved in their photoinactivation. The aim of this review is to (i) summarize the main approaches developed until now for the photodynamic inactivation of bacteriophages and mammalian viruses and, (ii) discuss and compare the present state of the art of mammalian viruses PDI with phage photoinactivation, with special focus on the most relevant mechanisms, molecular targets and factors affecting the viral inactivation process.

Effects of carbon nanomaterials fullerene C₆₀ and fullerol C₆₀(OH)₁₈₋₂₂ on gills of fish Cyprinus carpio (Cyprinidae) exposed to ultraviolet radiation

In consequence of their growing use and demand, the inevitable environmental presence of nanomaterials (NMs) has raised concerns about their potential deleterious effects to aquatic environments. The carbon NM fullerene (C₆₀), which forms colloidal aggregates in water, and its water-soluble derivative fullerol (C₆₀(OH)₁₈₋₂₂), which possesses antioxidant properties, are known to be photo-excited by ultraviolet (UV) or visible light. To investigate their potential hazards to aquatic organisms upon exposure to UV sunlight, this study analyzed (a) the in vitro behavior of fullerene and fullerol against peroxyl radicals (ROO) under UV-A radiation and (b) the effects of these photo-excited NMs on oxidative stress parameters in functional gills extracted from the fish Cyprinus carpio (Cyprinidae). The variables measured were the total antioxidant capacity, lipid peroxidation (TBARS), the activities of the antioxidant enzymes glutathione reductase (GR) and glutamate cysteine ligase (GCL), and the levels of the non-enzymatic antioxidant glutathione (GSH). The obtained results revealed the following: (1) both NMs behaved in vitro as antioxidants against ROO in the dark and as pro-oxidants in presence of UV-A, the latter effect being reversed by the addition of sodium azide, which is a singlet oxygen (¹O₂) quencher; (2) fullerene induced toxicity with or without UV-A incidence, with a significant (p<0.05) increase in lipid peroxidation (with greater damage under illumination), a decrease in GCL activity, and the depletion of GSH stocks (under illumination), all of which were attributed to ¹O₂ generation; and (3) fullerol also decreased GCL activity and GSH formation (p<0.05) but without lipid damage. The overall results show that fullerene can be toxic with or without light incidence, whereas UV radiation seems to play a key role in the environmental toxicity of carbon NMs through ¹O₂ formation.

Bacteriophage inactivation by UV-A illuminated fullerenes: role of nanoparticle-virus association and biological targets

Inactivation rates of the MS2 bacteriophage and (1)O(2) generation rates by four different photosensitized aqueous fullerene suspensions were in the same order: aqu-nC(60) < C(60)(OH)(6) ≈ C(60)(OH)(24) < C(60)(NH(2))(6). Alterations to capsid protein secondary structures and protein oxidation were inferred by detecting changes in infrared vibrational frequencies and carbonyl groups respectively. MS2 inactivation appears to be the result of loss of capsid structural integrity (localized deformation) and the reduced ability to eject genomic RNA into its bacterial host. Evidence is also presented for possible capsid rupture in MS2 exposed to UV-A illuminated C(60)(NH(2))(6) through TEM imagery and detection of RNA infrared fingerprints in ATR-FTIR spectra. Fullerene-virus mixtures were also directly visualized in the aqueous phase using a novel enhanced darkfield transmission optical microscope fitted with a hyperspectral imaging (HSI) spectrometer. Perturbations in intermolecular extended chains, HSI, and electrostatic interactions suggest that inactivation is a function of the relative proximity between nanoparticles and viruses and (1)O(2) generation rate. MS2 log survival ratios were linearly related to CT (product of (1)O(2) concentration C and exposure time T) demonstrating the applicability of classical Chick-Watson kinetics for all fullerenes employed in this study. Results suggest that antiviral properties of fullerenes can be increased by adjusting the type of surface functionalization and extent of cage derivatization thereby increasing the (1)O(2) generation rate and facilitating closer association with biological targets.