A membrane-based ELISA assay and electrochemical immunosensor for microcystin-LR in water samples

ATP-Responsive Strand Displacement Coupling with DNA Origami/AuNPs Strategy for the Determination of Microcystin-LR Using Surface-Enhanced Raman Spectroscopy

The DNA origami-mediated self-assembly strategy has emerged as a powerful tool in surface-enhanced Raman spectroscopy (SERS). However, these self-assembly approaches typically do not possess high detection specificity. Herein, a novel strategy based on adenosine triphosphate (ATP)-responsive strand displacement (ARSD) coupling with DNA origami/AuNPs for SERS analysis of microcystin-LR (MC-LR) is presented. In the presence of MC-LR and ATP molecules, nucleic acid sensing structures fabricated with anti-MC-LR aptamer (T1) and ATP aptamer (T2) were triggered to release the remaining ATP. In addition, DNA origami-assisted assembly results in the formation of homogeneous plasmonic nanostructures for Raman enhancement via strong plasmonic coupling. After the binding in the gaps of functionalized DNA origami/AuNPs, the Raman shift of the ATP molecules becomes detectable, leading to increased SERS intensity in 734 cm^-1. A linear response to MC-LR was obtained in the concentration range of 1.56-50 μg·L^-1, and the limit of detection (LOD) was 0.29 μg·L^-1. Combined with the solid-phase extraction sample pretreatment for extraction and 10-fold concentration, this proposed method was successfully used to detect MC-LR type in real lake-water samples with good recoveries of 98.4-116% and relative standard deviations of 1.9-6.7%. Furthermore, for the detection of MC-LR in contaminated lake-water samples, the results of the developed method and ultrahigh-performance liquid chromatography-tandem mass spectrometry were found to be in agreement with relative errors between -12 and 2.4%. The proposed strategy provides a sensitive recognition and signal amplification platform for trace MC-LR analysis as well as innovative nucleic acid sensing structures for toxin analysis more generally.

Sensitive Identification of Microcystin-LR via a Reagent-Free and Reusable Electrochemical Biosensor Using a Methylene Blue-Labeled Aptamer

We report a methylene blue (MB)-modified electrochemical aptamer (E-AB) sensor for determining microcystin-LR (MC-LR). The signal transduction of the sensor was based on changes in conformation and position of MB induced by the binding between MC-LR and the modified aptamer probe. In the absence of MC-LR, an aptamer probe was considered partially folded. After combining aptamer and MC-LR, the configuration of the aptamer probe changed and facilitated the electron transfer between MB and the electrode surface. As a result, an increased current response was observed. We optimized the parameters and evaluated the electrochemical performance of the sensor using square wave voltammetry (SWV). MC-LR was measured from 1.0 to 750.0 ng/L with a detection limit of 0.53 ng/L. The reliability of the method was verified by the determination of MC-LR in environmental real samples, such as pond water and tap water. Moreover, we demonstrated that this reagent-less biosensor could be regenerated and reused after rinsing with deionized water with good accuracy and reproducibility. As a reusable and regenerable E-AB sensor, this rapid, reagent-free, and sensitive sensing platform will facilitate routine monitoring of MC-LR in actual samples.

Recent advances in nanomaterials-based optical and electrochemical aptasensors for detection of cyanotoxins

The existence of cyanotoxins poses serious threats to human health, it is highly desirable to develop specific and sensitive methods for rapid detection of cyanotoxins in food and water. Due to the distinct advantages of aptamer including high specificity, good stability and easy preparation, various aptamer-based sensors (aptasensors) have been proposed to promote the detection of cyanotoxins. In this review, we summarize recent advance in optical and electrochemical aptasensors for cyanotoxins sensing by integrating with versatile nanomaterials or innovative sensing strategies, such as colorimetric aptasensors, fluorescent aptasensors, surface enhancement Raman spectroscopy-based aptasensors, voltammetric aptasensors, electrochemical impedance spectroscopy-based aptasensors and photoelectrochemical aptasensors. We highlight the accomplishments and advancements of aptasensors with improved performance. Furthermore, the current challenges and future prospects in cyanotoxins detection are discussed from our perspectives, which we hope to provide more ideas for future researchers.

CRISPR-Cas12a-Based Aptasensor for On-Site and Highly Sensitive Detection of Microcystin-LR in Freshwater

On-site monitoring of trace organic pollutants with facile methods is critical to environmental pollutant prevention and control. Herein, we proposed a CRISPR-Cas12a-based aptasensor platform (named as MC-LR-Casor) for on-site and sensitive detection of microcystin-LR (MC-LR). After hybridization with blocker DNA, the MC-LR aptamers were conjugated to magnetic beads (MBs) to get the MB aptasensor. In the presence of MC-LR, their interactions with aptamers were triggered and the specific binding caused the release of blocker DNA. Using the programmability of the CRISPR-Cas system, the released blocker DNA was designed to activate a Cas12a-crRNA complex. Single strand DNA reporters were rapidly cleaved by the complex. Signal readout could be achieved by fluorometer or lateral flow strips, which were positively correlated to MC-LR concentration. Benefiting from the CRISPR-Cas12a amplification system, the proposed sensing platform exhibited high sensitivity and reached the limit of detection of ∼3 × 10^-6 μg/L (fluorescence method) or 1 × 10^-3 μg/L (lateral flow assay). In addition, the MC-LR-Casor showed excellent selectivity and good recovery rates, demonstrating their good applicability for real water sample analysis. During the whole assay, only two steps of incubation at a constant temperature were required and the results could be visualized when employing flow strips. Therefore, the proposed assay offered a simple and convenient alternative for in situ MC-LR monitoring, which may hold great promise for future environmental surveillance.

A facile ultrasensitive detection of MC-LR toxin via a real-time assembled aptasensor of plasmonic graphene oxide

Real time controllable assembling/aptasensing approach via plasmonic graphene oxide (GO) nanocomposites has been firstly proven to simultaneously give tuning of micro-nano structure of plasmonic GO and ultrasensitive detection of MC-LR toxin. In order to fabricate the assembly, a high-quality hollow triangular nanoplate AgClAu:p-GO (HTNP AgClAu:p-GO) can act as a template; furthermore, we combine DNA-hybridization with biotin-strepavidin binding protocol for tuning the HTNP AgClAu:p-GO assemblies from networks to laminar structure, and simultaneously loading Raman reporters into the assemblies. The dynamic assembling process can be utilized as a real time SERS aptasensor for detecting MC-LR due to ratiometric introduction of MC-LR toxin inhibiting formation of plasmonic p-GO assembly via toxin/aptamer bioconjugation and causing reverse alteration of SERS signal for giving ultrasensitive SERS detection of MC-LR. A detection limit of 6.3pM with a wide linear range from 10pM to 5 nM can be achieved. When the aptasensor has been applied in real samples, the real time assembling/aptasensing approach shows recoveries from 98% to 103% with relative standard deviation (RSD) lower than 3%, expecting that one-step nanofabrication and sensing strategy can be extended to in-field test of environmental contaminants.

Assembling of anisotropic plasmonic sheet-core-satellites for simultaneous ultrasensitive detection of MC-LR toxin

An anisotropic plasmonic sheet-core-satellite (PSCS) superstructure can be controlled via competitive binding between aptamer/MC-LR conjugation and aptamer-ssDNA hybridization. SERS nanotags can be incorporated into anisotropic plasmonic sheet-cores, e.g., pGO/nanorods, or pGO/hollow AgCl : Au nanoplates so as to fabricate an aptasensor for "ON-OFF" detection of MC-LR toxin. Preparing a PSCS superstructure and detection of toxin can be simultaneously completed so as to simplify the detection procedure of MC-LR toxin. Detection sensitivity of MC-LR toxin can be optimized by controlling aspect ratios or hollow interiors of plasmonic core nanoparticles. Herein, a limit of detection (0.635 pM) with a wide linear range from 1 pM to 10 nM can be obtained via optimized PSCS of pGO/nanorod/dotnanotags. When the aptasensor was tested in real samples, the PSCS shows excellent recoveries from 96.6% to 104.5% with relative standard deviation (RSD) lower than 2.89% in spiked reservoir samples. It can be predicted that a one-step facile nanofabrication/aptasensing approach would be extensively applied for rapid detection of some other environmental contaminants.

Electrochemical Biosensors for Tracing Cyanotoxins in Food and Environmental Matrices

The adoption of electrochemical principles to realize on-field analytical tools for detecting pollutants represents a great possibility for food safety and environmental applications. With respect to the existing transduction mechanisms, i.e., colorimetric, fluorescence, piezoelectric etc., electrochemical mechanisms offer the tremendous advantage of being easily miniaturized, connected with low cost (commercially available) readers and unaffected by the color/turbidity of real matrices. In particular, their versatility represents a powerful approach for detecting traces of emerging pollutants such as cyanotoxins. The combination of electrochemical platforms with nanomaterials, synthetic receptors and microfabrication makes electroanalysis a strong starting point towards decentralized monitoring of toxins in diverse matrices. This review gives an overview of the electrochemical biosensors that have been developed to detect four common cyanotoxins, namely microcystin-LR, anatoxin-a, saxitoxin and cylindrospermopsin. The manuscript provides the readers a quick guide to understand the main electrochemical platforms that have been realized so far, and the presence of a comprehensive table provides a perspective at a glance.

Cell density-dependent regulation of microcystin synthetase genes (mcy) expression and microcystin-LR production in Microcystis aeruginosa that mimics quorum sensing

As the secondary metabolites of cyanobacterial harmful algal blooms (Cyano-HABs), microcystins (MCs) were generated under various environmental and cellular conditions. The understanding of the causes of MCs generation is of great interest in the field of water treatment and environmental science. In this work, we studied how Microcystis aeruginosa (FACHB-905) cell densities affect the MCs synthetase genes (mcy) expression, microcystin-LR (MC-LR) and quorum sensing molecules (Acyl-homoserine lactones (AHLs)) production. An electrochemical sensor was developed here for sensitive and quantitative detection of MC-LR that cultured at different cell densities. The results showed that mcy expression and MC-LR concentration started to increase when the cell density reached ca. 22 × 10⁶ cells/mL, and was significantly increased with increasing cell densities. Moreover, the up-regulation of AHLs with increasing cell densities revealed that MC-LR is quorum sensing-mediated. Our results undoubtedly confirmed that MC-LR was produced in a cell density-dependent way that mimics quorum sensing, and the minimum cell density (ca. 22 × 10⁶ cells/mL) that was required to produce MC-LR was provided and offered a reference standard for the prevention and control of MCs pollution in the actual water environment.

Enzyme-Free Molecularly Imprinted and Graphene-Functionalized Photoelectrochemical Sensor Platform for Pollutants

In this work, a label-free nonenzymatic photoelectrochemical (PEC) sensor is successfully developed for the detection of a typical pollutant, microcystin-LR (MC-LR), based on a visible-light-responsive alloy oxide, with highly ordered and vertically aligned Ti-Fe-O nanotubes (NTs) as substrates. Ti-Fe-O NTs consisting mainly of TiO₂ and atomically doped Fe₂O₃ are in situ prepared on a Ti-Fe alloy by electrochemical anodic oxidation. Using a simple electrochemical deposition technique, reduced graphene oxide (RGO) could be grown onto Ti-Fe-O NTs, exhibiting significant bifunctions. It not only provides an ideal microenvironment for functionalization of molecularly imprinted polymers (MIPs) on the surface but also serves as the PEC signal amplification element because of its outstanding conductivity for photons and electrons. The designed MIP/RGO/Ti-Fe-O NT PEC sensor exhibits high sensitivity toward MC-LR with a limit of detection as low as 10 pM. High selectivity toward MC-LR is also proven for the sensor. A promising detection platform not only for MC-LR but also for other pollutants has therefore been provided.

DNA nanotechnology: A recent advancement in the monitoring of microcystin-LR

The Microcystin-Leucine-Arginine (MC-LR) is the most toxic and widely distributed microcystin, which originates from cyanobacteria produced by water eutrophication. The MC-LR has deleterious effects on the aquatic lives and agriculture, and this highly toxic chemical could severely endanger human health when the polluted food was intaken. Therefore, the monitoring of MC-LR is of vital importance in the fields including environment, food, and public health. Utilizing the complementary base pairing between DNA molecules, DNA nanotechnology can realize the programmable and predictable regulation of DNA molecules. In analytical applications, DNA nanotechnology can be used to detect targets via target-induced conformation change and the nano-assemblies of nucleic acids. Compared with the conventional analytical technologies, DNA nanotechnology has the advantages of sensitive, versatile, and high potential in real-time and on-site applications. According to the molecular basis for recognizing MC-LR, the strategies of applying DNA nanotechnology in the MC-LR monitoring are divided into two categories in this review: DNA as a recognition element and DNA-assisted signal processing. This paper introduces state-of-the-art analytical methods for the detection of MC-LR based on DNA nanotechnology and provides critical perspectives on the challenges and development in this field.

Advances in nanomaterial-based electrochemical biosensors for the detection of microbial toxins, pathogenic bacteria in food matrices

There is a growing demand to protect food products against the hazard of microbes and their toxins. To satisfy such goals, it is important to develop highly sensitive, reliable, sophisticated, rapid, and cost-effective sensing techniques such as electrochemical sensors/biosensors. Although diverse forms of nanomaterials (NMs)-based electrochemical sensing methods have been introduced in markets, the reliability of commercial products is yet insufficient to meet the practical goal. In this review, we focused on: 1) sources of pathogenic microbes and their toxins; 2) possible routes of their entrainment in food, and 3) current development of NM-based biosensors to realize real-time detection of the target analytes. At last, future prospects and challenges in this research field are discussed.

Nanobiochar paper based electrochemical immunosensor for fast and ultrasensitive detection of microcystin-LR

A portable, cheap and sensitive paper type electrochemical immunosensor was developed with conductive nanobiochar paper as the conductive layer and utilized for sensitive detection of microcystin-LR (MCLR) toxin in water. The paper immunosensor was constructed by coating of highly conductive and dispersible nanobiochar particle (nBC) and anti-MCLR antibody on the filter paper via dipping-drying method. The presence of MCLR could be specifically quantified amperometrically by the nBC-paper immunosensor with the response time of less than 5 min, and the lowest detection limit of 17 pM (0.017 μg/L) was achieved. Moreover, the proposed immunosensor exhibited high selectivity, reproducibility and storage stability, and was also used for environmental water detection with satisfactory recovery. The successful fabrication of low cost and ubiquitous biochar based paper type electrochemical immunosensing system would have significant value for the development of highly cost-effective electrochemical device.

Synthesis of metal-organic framework-5@chitosan material for the analysis of microcystins and nodularin based on ultra-performance liquid chromatography-tandem mass spectrometry

Microcystins (MCs) and nodularin (NOD) are tumor promoters produced by cyanobacteria and present in surface water. In this work, a novel mesoporous metal-organic framework-5@chitosan (MOF-5@CS) material was synthesized and applied for the enrichment of MCs and NOD in water and fish samples. The mesoporous MOF-5@CS material was firstly synthesized via a one-step hydrothermal method, and the chitosan was combined with MOF-5 via chemical bonding assembly. As a new adsorbent, the as-synthesized material was found having a large specific surface area and good thermal stability. Under the optimized conditions, MCs and NOD were enriched by the MOF-5@CS material and detected by ultra-performance liquid chromatography-tandem mass spectrometry. The limit of detection of the new method for MCs and NOD were in the range of 0.0018-0.077 ng/mL. The value of relative standard deviation for repeatability were 2.69-6.30%, and the recovery of the analytes ranged from 84.36% to 118.51%. Compared with other reported method for MCs and NOD detection in complex matrices, better adsorption performance for MCs and NOD were obtained by our new method, and the sensitivity of MCs-RR and NOD were improved nearly 20 times and 30 times, respectively.

Recent developments in the methods of quantitative analysis of microcystins

Cyanotoxins are produced by the toxic cyanobacterial species present in algal blooms formed in water bodies due to nutrient over-enrichment by human influences and natural environmental conditions. Extensive studies are available on the most widely encountered cyanotoxins, microcystins (MCs) in fresh and brackish water bodies. MC contaminated water poses severe risks to human health, environmental sustainability, and aquatic life. Therefore, commonly occurring MCs should be monitored. Occasionally, detection and quantification of these toxins are difficult due to the unavailability of pure standards. Enzymatic, immunological assays, and analytical techniques like protein phosphatase inhibition assay, enzyme-linked immunosorbent assay, high-performance liquid chromatography, liquid chromatography-mass spectrometry, and biosensors are used for their detection and quantification. There is no single method for the detection of all the different types of MCs; therefore, various techniques are often combined to yield reliable results. Biosensor development offered a problem-solving approach in the detection of MCs due to their high accuracy, sensitivity, rapid response, and portability. In this review, an endeavor has been made to uncover emerging techniques used for the detection and quantification of the MCs.

Stanazolol derived ELISA as a sensitive forensic tool for the detection of multiple 17α-methylated anabolics

Two valuable forensic tools based on enzyme-linked immunoassays (ELISAs) for the analysis of 17α-methylated steroids were developed using haptens of stanazolol and its conjugates with biotin. Haptens containing terminal carboxylic group were conjugated to bovine serum albumin (BSA), rabbit serum albumin (RSA) or ovalbumin (OVA). Eight batches of antisera (RAbs) obtained by immunization of rabbits were tested in an indirect competitive ELISA system using immobilization of RSA conjugate (RSA/hapten) and competitor immobilization of the biotinylated conjugate (AB-ELISA) to avidin (avidin/hapten). The best results were achieved with the RAb 212 antibodies in RSA/ST-3 and avidin/ST-10 assembled variants. For the RSA/ST-3 system, an IC₅₀ of 0.3 ng/mL and a detection limit of 0.02 ng/mL were measured. In case of avidin/ST-10 variant, IC₅₀ was of 3.9 ng/mL and a detection limit of 0.57 ng/mL were obtained. The effect of solvent was tested as well as the stability of coated microtiter plates over four-month period. The cross-reactivity of the developed assays with other anabolic steroids was tested and high sensitivity towards 17α-methylated steroids was observed. RSA/ST-3 assay showed significant cross-reactivity with 17α-methyltestosterone (81.2%), oxymetholone (30.4%), methandienone (10.0%) and methyl dihydrotestosterone (7.7%). Similarly, in the avidin/ST-10 assay, 17α-methyltestosterone (34.5%), mestanolone (32.1%), oxymetholone (22.7%), methandienone (14.2%), 9-dehydromethyltestosterone (12.5%) and oxandrolone (1.2%) exhibited high cross-reactivity. The functionality of the developed systems was verified by the successful identification of a series of 17α-methylated anabolic steroids in a set of real samples including pharmaceutical preparations seized by the Police of the Czech Republic on the black market.

A highly sensitive electrochemical aptasensor for detection of microcystin-LR based on a dual signal amplification strategy

In this work, a sensitive and selective electrochemical aptasensor for determination of microcystin-LR (MC-LR) was developed based on a dual signal amplification system consisting of a novel ternary composite and horseradish peroxidase (HRP). The ternary composite was prepared by depositing gold nanoparticles (AuNPs) on molybdenum disulfide (MoS2) covered TiO2 nanobeads (TiONBs). MoS2 nanosheet modified TiONBs provided a large surface area for immobilization of AuNPs and biomolecules. The ternary composite also possesses an improved electron transfer and catalytic capability. To construct the aptasensor, thiolated MC-LR aptamers were immobilized on the AuNP@MoS2-TiONB modified electrode through a gold-sulfur bond. Then, biotin-cDNA with a sequence complementary to the MC-LR aptamer competed with MC-LR for binding to the immobilized aptamer. The current signal catalyzed by avidin-HRP decreased with the increase of MC-LR, based on which a linear range of 0.005-30 nM and a detection limit of 0.002 nM were obtained.

A Comprehensive Review: Development of Electrochemical Biosensors for Detection of Cyanotoxins in Freshwater

Cyanobacteria harmful algal blooms are increasing in frequency and cyanotoxins have become an environmental and public concern in the U.S. and worldwide. In this Review, the majority of reported studies and developments of electrochemical affinity biosensors for cyanotoxins are critically reviewed and discussed. Essential background information about cyanobacterial toxins and electrochemical biosensors is combined with the rapidly moving development of electrochemical biosensors for these toxins. Current issues and future challenges for the development of useful electrochemical biosensors for cyanotoxin detection that meet the demands for applications in field freshwater samples are discussed. The major aspects of the entire review article in a prescribed sequence include (i) the state-of-the-art knowledge of the toxicity of cyanotoxins, (ii) important harmful algal bloom events, (iii) advisories, guidelines, and regulations, (iv) conventional analytical methods for determination of cyanotoxins, (v) electrochemical transduction, (vi) recognition receptors, (vii) reported electrochemical biosensors for cyanotoxins, (viii) summary of analytical performance, and (ix) recent advances and future trends. Discussion includes electrochemical techniques and devices, biomolecules with high affinity, numerous array designs, various detection approaches, and research strategies in tailoring the properties of the transducer-biomolecule interface. Scientific and engineering aspects are presented in depth. This review aims to serve as a valuable source to scientists and engineers entering the interdisciplinary field of electrochemical biosensors for detection of cyanotoxins in freshwaters.

Electrochemical Biosensing of Algal Toxins in Water: The Current State-of-the-Art

Due to increasing stringency of water legislation and extreme consequences that failure to detect some contaminants in water can involve, there has been a strong interest in developing electrochemical biosensors for algal toxin detection during the past decade, evidenced by literature increasing from 2 journal papers pre-2009 to 24 between 2009 and 2018. In this context, this review has summarized recent progress of successful algal toxin detection in water using electrochemical biosensing techniques. Satisfactory detection recoveries using real environmental water samples and good sensor repeatability and reproducibility have been achieved, along with some excellent limit-of-detection (LOD) reported. Recent electrochemical biosensor literature in algal toxin detection is compared and discussed to cover three major design components: (1) biorecognition elements, (2) electrochemical read-out techniques, and (3) sensor electrodes and signal amplification strategy. The recent development of electrochemical biosensors has provided one more step further toward quick in situ detection of algal toxins in the contamination point of the water source. In the end, we have also critically reviewed the current challenges and research opportunities regarding electrochemical biosensors for algal toxin detection that need to be addressed before they attain commercial viability.

Detection of Abrin by Electrochemiluminescence Biosensor Based on Screen Printed Electrode

For the convenience of fast measurement in the outdoor environment, a portable electrochemiluminescence biosensor with the screen-printed electrode as the reaction center was developed, which possesses the characteristics of high sensitivity, small scale, simplified operation and so on, and has been used for in situ detection of abrin. First, combining with magnetic separation technique, the "biotin-avidin" method was used to immobilize the polyclonal antibody (pcAb) on the magnetic microspheres surface as the capture probe. Secondly, the Ru(bpy)₃²⁺-labeled monoclonal antibody (mcAb) was used as the specific electrochemiluminescence signal probe. Then, the "mcAb-toxin-pcAb" sandwich model was built to actualize the quantitative detection of abrin on the surface of the screen-printed electrode. The linear detection range was 0.5-1000 ng/mL; the regression equation was Y = 89.251lgX + 104.978 (R = 0.9989, n = 7, p < 0.0001); and the limit of detection (LOD) was 0.1 ng/mL. The sensing system showed high sensitivity, excellent specificity and good anti-interference ability, and could be used for the analysis of trace abrin in various environmental samples with good recovery and reproducibility. Compared with the traditional electrochemiluminescence sensing device, its miniaturization and portability gives it potential to satisfy the requirement of in situ detection.

A pM leveled photoelectrochemical sensor for microcystin-LR based on surface molecularly imprinted TiO2@CNTs nanostructure

A simple and highly sensitive photoelectrochemical (PEC) sensor towards Microcystin-LR (MC-LR), a kind of typical cyanobacterial toxin in water samples, was developed on a surface molecular imprinted TiO₂ coated multiwalled carbon nanotubes (MI-TiO₂@CNTs) hybrid nanostructure. It was synthesized using a feasible two-step sol-gel method combining with in situ surface molecular imprinting technique (MIT). With a controllable core-shell tube casing structure, the resultant MI-TiO₂@CNTs are enhanced greatly in visible-light driven response capacity. In comparison with the traditional TiO₂ (P25) and non-imprinted (NI-)TiO₂@CNTs, the MI-TiO₂@CNTs based PEC sensor showed a much higher photoelectric oxidation capacity towards MC-LR. Using this sensor, the determination of MC-LR was doable in a wide linear range from 1.0pM to 3.0nM with a high photocurrent response sensitivity. An outstanding selectivity towards MC-LR was further achieved with this sensor, proven by simultaneously monitoring 100-fold potential co-existing interferences. The superiority of the obtained MC-LR sensor in sensitivity and selectivity is mainly attributed to the high specific surface area and excellent photoelectric activity of TiO₂@CNTs heterojunction structure, as well as the abundant active recognition sites on its functionalized molecular imprinting surface. A promising PEC analysis platform with high sensitivity and selectivity for MC-LR has thus been provided.

A novel fluorescent aptasensor for ultrasensitive detection of microcystin-LR based on single-walled carbon nanotubes and dapoxyl

To assure water safety and protect human health, precise and simple analytical approaches are highly desired to determine low concentrations of microcystin-leucine-arginine (MC-LR), a toxin, in both water and serum samples. Herein, a simple, rapid and accurate aptamer-based fluorescent sensor was used for selective recognition of MC-LR, based on single-walled carbon nanotubes (SWNTs) as immobilizers, dapoxyl as a fluorescent dye, DAP-10 as a specific aptamer for dapoxyl and unmodified MC-LR aptamer (Apt) as a sensing ligand. The sensing method was developed to produce a remarkable fluorescence intensity difference in the absence and presence of MC-LR. Moreover, the Apt was used without any modification. In the absence of MC-LR, the dapoxyl could bind to DAP-10, leading to a strong fluorescence intensity. In the presence of MC-LR, DAP-10 bound to the surface of SWNTs, resulting in a very weak fluorescence intensity. Under optimized conditions, the presented fluorescent analytical approach showed high selectivity toward MC-LR with a limit of detection (LOD) of 138 pM. This new method indicated excellent analytical performance for MC-LR detection in tap water and serum samples with LODs of 135 and 168 pM, respectively.

A rolling circle amplification signal-enhanced immunosensor for ultrasensitive microcystin-LR detection based on a magnetic graphene-functionalized electrode

Construction of a rolling circle amplification signal-enhanced immunosensor for ultrasensitive microcystin-LR detection by using a magnetic graphene functionalized electrode.

A simple highly sensitive and selective aptamer-based colorimetric sensor for environmental toxins microcystin-LR in water samples

A simple and highly sensitive aptamer-based colorimetric sensor was developed for selective detection of Microcystin-LR (MC-LR). The aptamer (ABA) was employed as recognition element which could bind MC-LR with high-affinity, while gold nanoparticles (AuNPs) worked as sensing materials whose plasma resonance absorption peaks red shifted upon binding of the targets at a high concentration of sodium chloride. With the addition of MC-LR, the random coil aptamer adsorbed on Au NPs altered into regulated structure to form MC-LR-aptamer complexes and broke away from the surface of Au NPs, leading to the aggregation of AuNPs, and the color converted from red to blue due to the interparticle plasmon coupling. Results showed that our aptamer-based colorimetric sensor exhibited rapid and sensitive detection performance for MC-LR with linear range from 0.5 nM to 7.5 μM and the detection limit reached 0.37 nM. Meanwhile, the pollutants usually coexisting with MC-LR in pollutant water samples had not demonstrated disturbance for detecting of MC-LR. The mechanism was also proposed suggesting that high affinity interaction between aptamer and MC-LR significantly enhanced the sensitivity and selectivity for MC-LR detection. Besides, the established method was utilized in analyzing real water samples and splendid sensitivity and selectivity were obtained as well.

In-situ assembly of biocompatible core-shell hierarchical nanostructures sensitized immunosensor for microcystin-LR detection

Microcystin-LR (MC-LR) is a kind of hepatotoxin which can cause functional and structural disturbances of the liver, accumulate in aquatic organisms and transfer to higher trophic levels, a biocompatible electrochemical immunosensor was constructed to detect MC-LR sensitively and selectively. The three-dimensional villiform-like carbon nanotube/cobalt silicate (CNT@Co silicate) core-shell nanocomposites were synthesized and firstly used as the substrate to immobilize the antigen of MC-LR (Ag), while Fe3O4 nanoclusters/polydopamine/gold nanoparticles (Fe3O4@PDA-Au) core-shell magnetic nanocomposites were prepared as the label carrier of the immunosensor to conjugate the second antibody (Ab2) and horse radish peroxidase (HRP). Since the toxicity of nanomaterials is important in the construction of biosensors including the immobilization of antigen or antibody, the biocompatibility of such nanocomposites were investigated by monitoring the cell viability after culturing with Hela cells. Due to the excellent biocompatibility, the immunosensor can immobilize more antigens by the large surface area of the three-dimensional villiform-like structure in CNT@Co silicate, and provide high electrochemical signals by Fe3O4@PDA-Au labeled Ab2 and HRP. After investigation of the binding capability of biomolecules on nanomaterials and optimization of the conditions in the competitive immunoassay, the proposed electrochemical immunosensor shows a linear response to MC-LR in the range from 0.005 μg/L to 50 μg/L with a detection limit of 0.004 μg/L. In addition, the specificity, reproducibility and stability of the immunosensor were also proved to be acceptable, indicating its potential application in environmental monitoring.

Label-Free Electrical Immunosensor for Highly Sensitive and Specific Detection of Microcystin-LR in Water Samples

Microcystin-LR (MCLR) is one of the most commonly detected and toxic cyclic heptapeptide cyanotoxins released by cyanobacterial blooms in surface waters, for which sensitive and specific detection methods are necessary to carry out its recognition and quantification. Here, we present a single-walled carbon nanotube (SWCNTs)-based label-free chemiresistive immunosensor for highly sensitive and specific detection of MCLR in different source waters. MCLR was initially immobilized on SWCNTs modified interdigitated electrode, followed by incubation with monoclonal anti-MCLR antibody. The competitive binding of MCLR in sample solutions induced departure of the antibody from the antibody-antigen complexes formed on SWCNTs, resulting in change in the conductivity between source and drain of the sensor. The displacement assay greatly improved the sensitivity of the sensor compared with direct immunoassay on the same device. The immunosensor exhibited a wide linear response to log value of MCLR concentration ranging from 1 to 1000 ng/L, with a detection limit of 0.6 ng/L. This method showed good reproducibility, stability and recovery. The proposed method provides a powerful tool for rapid and sensitive monitoring of MCLR in environmental samples.

Carbohydrate derivative-functionalized biosensing toward highly sensitive electrochemical detection of cell surface glycan expression as cancer biomarker

Accurate and highly sensitive detection of glycan expression on cell surface is extremely important for cancer diagnosis and therapy. Herein, a carbohydrate derivative-functionalized biosensor was developed for electrochemical detection of the expression level of cell surface glycan (mannose used as model). Thiomannosyl dimer was synthesized to design the thiomannosyl-functionalized biosensor by direct and rapid one-step protocols. The biosensing surface-confined mannose could effectively mimic the presentation of cell surface mannose and was responsible for competing with mannose on cancer cells in incubation solution. Greatly enhanced sensitivity was achieved by exploiting the excellent conductivity of multiwalled carbon nanotube/Au nanoparticle (MWNT/AuNP), the amplification effect of MWNTs, and the favorable catalytic ability of horseradish peroxidase (HRP). Using competitive strategy, the developed biosensor exhibits attractive performances for the analysis of mannose expression with rapid response, high sensitivity and accuracy, and possesses great promise for evaluation of cell surface glycan expression by using a greater variety of lectins.

Label-free voltammetric aptasensor for the sensitive detection of microcystin-LR using graphene-modified electrodes

The development of successful biosensing platforms is highly dependent upon the biorecognition properties of the recognition receptor and the sensitivity of the transducer of the binding signal. The integration of the high affinity and specificity of DNA aptamers with the unique properties of the carbon nanomaterial graphene offers an excellent avenue for sensitive and selective biosensing architectures. In this work, a highly sensitive and selective aptasensor which utilizes an unlabeled DNA aptamer assembled on a graphene electrode for microcystin-LR detection was developed. A facile strategy was used for the aptasensor fabrication on the basis of the noncovalent assembly of DNA aptamer on graphene-modified screen printed carbon electrodes. Assembly of the DNA aptamer on the graphene-modified electrodes caused a marked drop in the square wave voltammetric reduction signal of the [Fe(CN)6](4-/3-) redox couple. The presence of microcystin-LR, on the other hand, caused a dose-responsive increase in peak current, allowing the quantification of microcystin-LR through the measurement of peak current change. Under optimal conditions, the detection limit of the developed aptasensor was 1.9 pM in buffer, a concentration much lower than those offered by previously reported biosensors for microcystin-LR. The developed aptasensor also exhibited excellent selectivity for microcystin-LR with no detectable cross-reactivity to okadaic acid, microcystin-LA, and microcystin-YR. Moreover, the proposed aptasensor has been applied for the analysis of spiked tap water and fish samples showing good recovery percentages. This novel, simple, high-performance, and low-cost detection platform would facilitate the routine monitoring of microcystin-LR in real samples.

Multihapten approach leading to a sensitive ELISA with broad cross-reactivity to microcystins and nodularin

Microcystins (MCs) are a group of biotoxins (>150) produced by cyanobacteria, with a worldwide distribution. MCs are hepatotoxic, and acute exposure causes severe liver damage in humans and animals. Rapid and cheap methods of analysis are therefore required to protect people and livestock, especially in developing countries. To include as many MCs as possible in a single analysis, we developed a new competitive ELISA. Ovine polyclonal antibodies were raised using an immunogen made by conjugating a mixture of microcystins to cationised bovine serum albumin, and the plate-coating antigen was prepared by conjugating [Asp3]MC-RY to ovalbumin. This strategy was used also to minimize specificity for particular microcystin congeners. Cross-reactivity studies indicate that the ELISA has broad specificity to microcystins and also detects nodularin, providing a sensitive and rapid analytical method for screening large numbers of samples. The limit of quantitation for microcystins in drinking water is 0.04 μg/L, well below the WHO's maximum recommendation of 1 μg/L. The ELISA can be used for quantifying total microcystins in various matrices, including drinking water, cyanobacterial cultures, extracts, and algal blooms, and may be useful in detecting metabolites and conjugates of MCs.

An aptamer-based immunoassay in microchannels of a portable analyzer for detection of microcystin-leucine-arginine

The rapid detection of microcystin-leucine-arginine (MC-LR), the most highly toxic among MCs, is significantly important to environmental and human health protection and prevention of MC-LR from being used as a bioweapon. Although aptamers offer higher affinity, specificity, and stability with MC-LR than antibodies in the immunodetection of MC-LR due to steric hindrance between two antibodies and limited epitopes of MC-LR for use in a sandwich immunoassay, no sandwich immunoassay using an aptmer has been developed for MC-LR detection. This study is aimed at developing an aptamer-antibody immunoassay (AAIA) to detect MC-LR using a portable analyzer. The aptamers were immobilized onto the glass surface of a microchamber to capture MC-LR. MC-LR and horseradish peroxidase (HRP)-labeled antibody were pulled into the microchamber to react with the immobilized aptamer. The chemiluminescence (CL) catalyzed by HRP was tested by a photodiode-based portable analyzer. MC-LR at 0.5-4.0 μg/L was detected quantitatively by the AAIA, with a CL signal sensitivity of 0.3 μg/L. The assay took less than 35 min for a single sample and demonstrated a high specificity, detecting only MC-LR, but not MC-LA, MC-YR, or nodularin-R. The recovery of two spiked real environmental samples calculated as 94.5-112.7%. Therefore, this AAIA was proved to be a rapid and simple method to detect MC-LR in the field by a single analyst.

A compact immunoassay platform based on a multicapillary glass plate

A highly sensitive, rapid immunoassay performed in the multi-channels of a micro-well array consisting of a multicapillary glass plate (MCP) and a polydimethylsiloxane (PDMS) slide is described. The micro-dimensions and large surface area of the MCP permitted the diffusion distance to be decreased and the reaction efficiency to be increased. To confirm the concept of the method, human immunoglobulin A (h-IgA) was measured using both the proposed immunoassay system and the traditional 96-well plate method. The proposed method resulted in a 1/5-fold decrease of immunoassay time, and a 1/56-fold cut in reagent consumption with a 0.05 ng/mL of limit of detection (LOD) for IgA. The method was also applied to saliva samples obtained from healthy volunteers. The results correlated well to those obtained by the 96-well plate method. The method has the potential for use in disease diagnostic or on-site immunoassays.

Development of a real-time capacitive biosensor for cyclic cyanotoxic peptides based on Adda-specific antibodies

The harmful effects of cyanotoxins in surface waters have led to increasing demands for accurate early warning methods. This study proposes a capacitive immunosensor for broad-spectrum detection of the group of toxic cyclic peptides called microcystins (∼80 congeners) at very low concentration levels. The novel analytical platform offers significant advances compared to the existing methods. Monoclonal antibodies (mAbs, clone AD4G2) that recognize a common element of microcystins were used to construct the biosensing layer. Initially, a stable insulating anchor layer for the mAbs was made by electropolymerization of tyramine onto a gold electrode surface, with subsequent incorporation of gold nanoparticles (AuNPs) on the glutaraldehyde (5%) activated polytyramine surface. The biosensor responded linearly to microcystin concentrations from 1×10(-13)M to 1×10(-10)M MC-LR standard with a limit of detection of 2.1×10(-14)M. The stability of the biosensor was evaluated by repeated measurements of the antigen and by determining the capacitance change relative to the original response, which decreased below 90% after the 30th cycle.

A cantilever biosensor-based assay for toxin-producing cyanobacteria Microcystis aeruginosa using 16S rRNA

Monitoring of cyanotoxins in source waters is currently done through toxin-targeting assays which suffer from low sensitivity due to poor antibody avidity. We present a biosensor-based method as an alternative for detecting toxin-producing cyanobacteria M. aeruginosa via species-selective region of 16S rRNA at concentrations as low as 50 cells/mL, and over a five-log dynamic range. The cantilever biosensor was immobilized with a 27-base DNA strand that is complementary to the target variable region of 16S rRNA of M. aeruginosa. The cantilever sensor detects mass-changes through shifts in its resonant frequency. Increase in the biosensor's effective mass, caused by hybridization of target strand with the biosensor-immobilized complementary strand, showed consistent and proportional frequency shift to M. aeruginosa concentrations. The sensor hybridization response was verified in situ by two techniques: (a) presence of duplex DNA structure postdetection via fluorescence measurements, and (b) secondary hybridization of nanogold-labeled DNA strands to the captured 16S rRNA strands. The biosensor-based assay, conducted in a flow format (∼ 0.5 mL/min), is relatively short, and requires a postextraction analysis time of less than two hours. The two-step detection protocol (primary and secondary hybridization) is less prone to false negatives, and the technique as a whole can potentially provide an early warning for toxin presence in source waters.

Colloidal graphene as a transducer in homogeneous fluorescence-based immunosensor for rapid and sensitive analysis of microcystin-LR

Herein, we reported the assembly of colloidal graphene (CG) and microcystin (MC)-LR-DNA bioconjugates to develop a homogeneous competitive fluorescence-based immunoassay for rapid and sensitive detection of MC-LR in water samples. Initially, the MC-LR-DNA probe was quickly adsorbed onto the CG surface through the strong noncovalent π-π stacking interactions and can be effectively quenched benefiting from the high quenching efficiency of CG. In contrast, the competitive binding of anti-MC-LR with MC-LR-DNA destroyed the graphene/MC-LR-DNA interaction, thus resulting in the restoration of fluorescence signal. This signal transduction mechanism made it possible for analysis of the target MC-LR. Taking advantage of the colloidal nature of the as-prepared graphene, the assay was carried out in homogeneous solution throughout, which avoided numerous immobilization, incubation, and washing steps that were necessary to traditional heterogeneous immunoassays, thereby reducing the whole assay time (within less than 35 min) and allowing a much better antigen-antibody interaction. Moreover, due to the direct competitive mode, the assay did not involve any antibody labeling or modification process, which would be beneficial to preserve the binding affinity of antigen-antibody. Under optimal conditions, the proposed immunosensor can be applied for quantitative analysis of MC-LR with a detection limit of 0.14 μg/L, which satisfied the World Health Organization (WHO) provisional guideline limit of 1 μg/L for MC-LR in drinking water, thus providing a powerful tool for rapid and sensitive monitoring of MC-LR in environmental samples.

Fabrication of a novel and simple microcystin-LR photoelectrochemical sensor with high sensitivity and selectivity

Microcystin-LR (MC-LR), an inert electrochemical species, is difficult to be detected by a simple and direct electrochemical method. In the present work, a novel photoelectrochemical sensor is developed on highly ordered and vertically aligned TiO(2) nanotubes (TiO(2) NTs) with convenient surface modification of molecularly imprinted polymer (MIP) (denoted as MIP@TiO(2) NTs) for highly sensitive and selective determination of MC-LR in solutions. Molecularly imprinted polypyrrole (PPy) of MC-LR is chosen as the recognition element. The designed MIP@TiO(2) NTs photoelectrochemical sensor presents excellent applicability in MC-LR determination, with linear range from 0.5 to 100 μg L(-1) and limit of detection of 0.1 μg L(-1). Moreover, the sensor exhibits outstanding selectivity while used in coexisting systems containing 2,4-dichorophenoxyacetic acid, atrazine, paraquat, or monosultap with high concentration, 100 times that of MC-LR. The sensor presents good photoelectric conversion efficiency and detection sensitivity, as well as broad linear detection range, mainly because of the high specific surface area and photoelectric activity of TiO(2) NTs and the π bond delocalized electron system of PPy that promotes the separation of electron-holes. The prominent selectivity is from the MIP by forming multiple hydrogen bonds between PPy and MC-LR. Mechanisms for photoelectrochemical analysis and selective recognition are also discussed.