Release of TiO2 nanoparticles from sunscreens into surface waters: a one-year survey at the old Danube recreational Lake

Spatial distribution, temporal variations and source of titanium dioxide nanoparticles in Taihu Lake, China

The detrimental impacts of titanium dioxide nanoparticles (TiO2NPs) on the ecosystem and organisms have aroused great public concerns. However, the information on their concentration in the real aquatic environment is still limited, hindering the rational evaluation of their potential hazards. In this study, water samples from Taihu Lake were collected in June and November 2023, to investigate the spatial distribution and temporal variations of TiO2NPs. Using phosphorylated Fe3O4 particles based magnetic solid phase extraction and ICP-MS determination, high concentrations of TiO2NPs were detected in the western and northern regions of Taihu Lake. These areas contribute to 83 % of the total runoff into the lake. Total Ti levels were typically higher in November than in June, but no marked seasonal difference was observed for TiO2NPs. Different shapes of TiO2NPs with both smooth and rough surfaces were observed in the surface water. To further distinguish whether these TiO2NPs were sourced from the natural background or anthropogenic sources, the ratios of Ti to other rare elements including Nb were calculated. In November, the Ti/Nb ratios at most sampling sites were significantly higher than those in June, indicating that a large amount of engineered TiO2NPs are discharged into Taihu Lake during the summer and autumn seasons. Our study contributes to the understanding of contamination levels, spatial distribution, and temporal variation of TiO2NPs in lake systems, and provides valuable data for their further risk assessment.

The potential ameliorative role of Dimercaptosuccinic acid against the toxicity of Titanium Dioxide Nanoparticles on Caelatura nilotica clams

The prevalent use of nanoparticles has adverse negative effects on biosystems. Subsequently, this study aimed to use Caelatura nilotica to assess the ecotoxicity of TiO2 NPs and how Dimercaptosuccinic acid (DMSA) improves these effects. Two concentrations of TiO2 NPs (25 and 150 µg/L) were used for 28 days. TiO2 NPs bioaccumulation, gonadal weight, gonado-somatic index, and histopathological alterations of gonads were determined. The tissues' accumulation of TiO2 NPs was concentration-time-dependent: it was 78.5 ± 28.93 μg/g dry weight in the exposed clams to 150 µg/L TiO2 NPs after 4 weeks of exposure. The gonadal weight and gonado-somatic index significantly decreased of the exposed group to 150 µg/L TiO2 NPs over the experimental period that they ended with values (1.01 ± 0.57 gm, 19.15 ± 7.75%, respectively). There are some histological alterations in the gonads of C. nilotica such as necrosis, deteriorated connective tissue, increased fibrous tissue, a reduced presence of mature sperms and mature ova, and irregular shapes of testicular/ovarian follicles. When using Dimercaptosuccinic acid (DMSA), this led to a reduction in accumulation of TiO2 NPs by the end of the experiment. So, C. nilotica is a promising model to reflect the adverse nano-toxics. DMSA emerges as a potentially valuable chelating agent that abolishes the negative effects of these nanoparticles.

Repeated marine heatwaves aggravate the adverse effects of nano-TiO2 on physiological metabolism of the thick-shelled mussel Mytilus coruscus

Global climate change is a major trigger of unexpected temperature fluctuations. The impacts of marine heatwaves (MHWs) and nano-titanium dioxide (nano-TiO2) on marine organisms have been extensively investigated. However, the potential mechanisms underlying their interactive effects on physiological processes and metabolism remain poorly understood, especially regarding periodic MHWs in real-world conditions. In this study, the effects of nano-TiO2 (at concentrations of 0, 25, and 250 μg/L) and periodic MHWs on the condition index (CI) and underlying metabolic mechanisms were investigated in mussels (Mytilus coruscus). The results showed that mussels try to upregulate their respiration rate (RR) to enhance aerobic metabolism (indicated by elevated succinate dehydrogenase) under short-term nano-TiO2 exposure. However, even at ambient concentration (25 μg/L), prolonged nano-TiO2 exposure inhibited ingestion ability (decreased clearance rate) and glycolysis (inhibited pyruvate kinase, hexokinase, and phosphofructokinase activities), which led to an insufficient energy supply (decreased triglyceride, albumin, and ATP contents). Repeated thermal scenarios caused more severe physiological damage, demonstrating that mussels are fragile to periodic MHWs. MHWs decreased the zeta potential of the nano-TiO2 particles but increased the hydrodynamic diameter. Additionally, exposure to nano-TiO2 and periodic MHWs further affected aerobic respiration (inhibited lactate dehydrogenase and succinate dehydrogenase activities), metabolism (decreased RR, activities of respiratory metabolism-related enzymes, and expressions of PEPCK, PPARγ, and ACO), and overall health condition (decreased ATP and CI). These findings indicate that the combined stress of these two stressors exerts more detrimental impact on the physiological performance and energy metabolism of mussels, and periodic MHWs exacerbate the toxicological effects of ambient concentration nano-TiO2. Given the potential worsening of nanoparticle pollution and the increase in extreme heat events in the future, the well-being of mussels in the marine environment may face further threats.

Antioxidant-related enzymes and peptides as biomarkers of metallic nanoparticles (eco)toxicity in the aquatic environment

Increased awareness of the impact of human activities on the environment has emerged in recent decades. One significant global environmental and human health issue is the development of materials that could potentially have negative effects. These materials can accumulate in the environment, infiltrate organisms, and move up the food chain, causing toxic effects at various levels. Therefore, it is crucial to assess materials comprising nano-scale particles due to the rapid expansion of nanotechnology. The aquatic environment, particularly vulnerable to waste pollution, demands attention. This review provides an overview of the behavior and fate of metallic nanoparticles (NPs) in the aquatic environment. It focuses on recent studies investigating the toxicity of different metallic NPs on aquatic organisms, with a specific emphasis on thiol-biomarkers of oxidative stress such as glutathione, thiol- and related-enzymes, and metallothionein. Additionally, the selection of suitable measurement methods for monitoring thiol-biomarkers in NPs' ecotoxicity assessments is discussed. The review also describes the analytical techniques employed for determining levels of oxidative stress biomarkers.

Microglial activation and pyroptosis induced by nano-TiO2 in marine medaka brain

Recently, nano-titanium dioxide (nano-TiO2) has been widely distributed over surface water. However, there are few reports on its effects on the central nervous system of fish. In this study, we investigated whether nano-TiO2 enters the medaka brain after exposure and its effect on the brain. Marine medaka brains were examined after exposure to 0.01 g/L nano-TiO2 for 3, 10, and 20 d. Nano-TiO2-like particles were found in the telencephalon of treated fish. There was no obvious brain histopathological injury. The number of irregular mitochondria with absent cristae increased. Gene expression of the apoptosis-related genes, casp8, bcl2b, and bax, decreased significantly in the nano-TiO2 group at 3 d. In contrast, the pyroptosis-related genes, gsdmeb and casp1, and inflammation-related factor, il18, increased significantly. As an activated microglia marker, mRNA expression of cd68 increased significantly in the nano-TiO2 treated group. Moreover, CD68 protein expression also increased significantly at 10 d. Altogether, we show that nano-TiO2 can alter mitochondrial morphology in the telencephalon of medaka, leading to microglial activation and pyroptosis.

Ti-containing NPs in raw water and their removal with conventional treatments in four water treatment plants in Taiwan

The ingestion of Ti-containing nanoparticles from drinking water has emerged as a concern in recent years. This study therefore aimed to characterize Ti-containing nanoparticles in water samples collected from four water treatment plants in Taiwan and to explore the challenges associated with measuring them at low levels using single particle-inductively coupled plasma mass spectrometry. Additionally, the study sought to identify the most effective processes for the removal of Ti-containing nanoparticles. For each water treatment plant, two water samples were collected from raw water, sedimentation effluent, filtration effluent, and finished water, respectively. Results revealed that Ti-containing nanoparticles in raw water, with levels at 8.69 μg/L and 296.8 × 103 particles/L, were removed by approximately 35% and 98%, respectively, in terms of mass concentration and particle number concentration, primarily through flocculation and sedimentation processes. The largest most frequent nanoparticle size in raw water (112.0 ± 2.8 nm) was effectively reduced to 62.0 ± 0.7 nm in finished water, while nanoparticles in the size range of 50-70 nm showed limited changes. Anthracite was identified as a necessary component in the filter beds to further improve removal efficiency at the filtration unit. Moreover, the most frequent sizes of Ti-containing nanoparticles were found to be influenced by salinity. Insights into the challenges associated with measuring low-level Ti-containing nanoparticles in aqueous samples provide valuable information for future research and management of water treatment processes, thereby safeguarding human health.

DDT and titanium dioxide nanoparticle coexposure induced neurobehavioral deficits in zebrafish

Both dichlorodiphenyltrichloroethane (DDT) and titanium dioxide nanoparticle (TiO2 NP) have worldwide-scale commercial applications, resulting in their co-pollution in the ecosystems and posing combined health risks. However, there is a lack of toxicity studies for the interactions of DDT and TiO2 NP in the environmental relevant concentrations. In this study, we characterized the coexposures using a zebrafish waterborne exposure approach and evaluated the neurotoxicity response of the treated embryos or adults. Our results showed that DDT/TiO2 NP coexposure enhanced the DDT accumulation in vivo and increased the larval locomotor. The chronic DDT/TiO2 NP coexposure did not affect the overall survival rate, sex ratio and growth. However, DDT/TiO2 NP coexposure severely affected the adult locomotor activity, social contact, shoaling and aggressive behaviors compared to single treatment groups or controls. These adult behavioral deficits were accompanied by changes in neurotransmitter acetylcholine (ACH) level in the brain and muscle tissues, as well as neural development genes expression activation of growth-associated protein 43 (gap43) and synaptic vesicle glycoprotein 2 (sv2) in the brain. The significantly increased ACH level and the activated neural genes expression in the DDT/TiO2 NP co-exposed fish may account for the observed hyperactivity and social deficits.

Characterization of Fe-Containing and Pb-Containing Nanoparticles Resulting from Corrosion of Plumbing Materials in Tap Water Using a Hyphenated ATM-DMA-spICP-MS System

Single-particle inductively coupled plasma mass spectrometry (spICP-MS) has been used to characterize metallic nanoparticles (NPs) assuming that all NPs are spherical and composed of pure element. However, environmental NPs generally do not meet these criteria, suggesting that spICP-MS may underestimate their true sizes. This study employed a system hyphenating the atomizer (ATM), differential mobility analyzer (DMA), and spICP-MS to characterize metallic NPs in tap water. Its performance was validated by using reference Au nanoparticles (AuNPs) and Ag-shelled AuNPs. The hyphenated system can determine the actual size and metal composition of both NPs with additional heating after ATM, while stand-alone spICP-MS misidentified the Ag-shelled AuNPs as smaller individual AgNPs and AuNPs. Dissolved metal ions could introduce artifact NPs after heating but could be eliminated by centrifugation. The hyphenated system was applied to characterize Fe-containing and Pb-containing NPs resulting from the corrosion of plumbing materials in tap water. The mode sizes of Fe-containing and Pb-containing NPs were determined to be 110 and 100 nm and the particle number concentrations were determined to be 4.99 × 107 and 1.40 × 106 #/mL, respectively. Cautions should be paid to potential changes in particle size induced by heating for metallic NPs with a low melting point or a high organic content.

Environmental effects and interaction of nanoparticles on beneficial soil and aquatic microorganisms

A steadily increasing production volume of nanoparticles reflects their numerous industrial and domestic applications. These economic successes come with the potential adverse effects on natural systems that are associated with their presence in the environment. Biological activities and effects of nanoparticles are affected by their entry method together with their specificities like their size, shape, charge, area, and chemical composition. Particles can be classified as safe or dangerous depending on their specific properties. As both aquatic and terrestrial systems suffer from organic and inorganic contamination, nanoparticles remain a sink for these contaminants. Researching the sources, synthesis, fate, and toxicity of nanoparticles has advanced significantly during the last ten years. We summarise nanoparticle pathways throughout the ecosystem and their interactions with beneficial microorganisms in this research. The prevalence of nanoparticles in the ecosystem causes beneficial microorganisms to become hazardous to their cells, which prevents the synthesis of bioactive molecules from undergoing molecular modifications and diminishes the microbe population. Recently, observed concentrations in the field could support predictions of ambient concentrations based on modeling methodologies. The aim is to illustrate the beneficial and negative effects that nanoparticles have on aqueous and terrestrial ecosystems, as well as the methods utilized to reduce their toxicity.

Are Physical Sunscreens Safe for Marine Life? A Study on a Coral-Zooxanthellae Symbiotic System

Limited toxic and ecological studies were focused on physical sunscreen that is considered to have "safer performance", in which nanosize zinc oxide (nZnO) and nanosize titanium dioxide (nTiO2) generally are added as ultraviolet filters. Herein, the common button coral Zoanthus sp. was newly used to assess the toxic effects and underlying mechanisms of physical sunscreen. Results showed that physical sunscreen induced severe growth inhibition effects and largely compelled the symbiotic zooxanthellae, indicating that their symbiotic systems were threatened and, also, that neural and photosynthesis functions were influenced. Zn2+ toxicity and bioaccumulation were identified as the main toxic mechanisms, and nTiO2 particles released from physical sunscreen also displayed limited bioattachment and toxicity. Oxidative stress, determined by increased reactive oxygen species, superoxide dismutase, and malondialdehyde content, was indicated as another important toxic mechanism. Furthermore, when Zoanthus sp. was restored, the inhibited individual coral could be largely recovered after a short (3 d) exposure time; however, a longer exposure time damaged the coral irretrievably, which revealed the latent environmental risks of physical sunscreen. This study investigated the toxic effect of physical sunscreen on Zoanthus sp. in a relatively comprehensive manner, thus providing new insights into the toxic response of sunscreen on marine organisms.

Single-Particle ICP-TOFMS with Online Microdroplet Calibration: A Versatile Approach for Accurate Quantification of Nanoparticles, Submicron Particles, and Microplastics in Seawater

Single particle inductively coupled plasma time-of-flight mass spectrometry (spICP-TOFMS) is a powerful analytical technique for quantifying elements in nanoparticles and microparticles; however, like most ICP-MS-based measurements, matrix effects can be a major challenge for accurate quantification in spICP-MS. Here, we report the use of online microdroplet calibration to overcome extreme matrix effects observed for the analysis of nanoparticles and microparticles in seawater. With online microdroplet calibration, particle-containing samples are introduced into the ICP along with monodisperse microdroplets containing known element mass amounts. The microdroplet standards, which experience the same plasma conditions as the analyte particles, are used to measure matrix-matched absolute element sensitivities. With online microdroplet calibration, one multielemental standard can be used to determine the element mass amounts in diverse types of analyte particles independent of the sample matrix. We evaluate the matrix tolerance of spICP-TOFMS with online microdroplet calibration through the analysis of metal nanoparticles, polystyrene microplastic beads doped with rare-earth elements, and metal-oxide submicrometer particles in artificial seawater. Our results demonstrate mass recoveries of 98-90% for the analysis of individual gold NPs in ultrapure water to 99% seawater. In the analysis of food-grade TiO2 submicron particles, accurate Ti-mass per particle is determined with matrix-caused signal attenuation up to 80% in a pure seawater matrix. We also demonstrate accurate diameter determinations of individual 3.4 μm polystyrene beads at concentrations of up to 80% simulated seawater. Furthermore, simultaneous and accurate quantification of rare-earth elements in the polystyrene beads is achieved.

Nanomaterials in sunscreens: Potential human and ecological health implications

Inorganic nanomaterials such as TiO2 and ZnO provide significant benefits in terms of UV protection, and their use generally has increased in commercial sunscreens. However, more recently there have been concerns about their potential human and ecological health implications, mostly driven by perception rather than by formal assessments. The large and increasing body of literature on these nanomaterials indicates that in most circumstances their risk are minimal. Penetration of the human epidermis is minimal for these nanomaterials, significantly reducing the potential effects that these nanomaterials may pose to internal organs. The excess Zn ion dose is very small compared to normal dietary consumption of Zn, which is a necessary element. The levels of residual nanomaterials or released ions in public swimming pools is also low, with minimal effect in case this water is ingested during swimming or bathing. In natural environments with significant water flow due to wind and water currents, the concentrations of nanomaterials and released ions are generally well below levels that would cause effects in aquatic organisms. However, sensitive habitats with slow currents, such as coral reefs, may accumulate these nanomaterials. The number of studies of the levels and effects of nanomaterials in these sensitive habitats is very small; more research is needed to determine if there is an elevated risk to these ecosystems from the use of sunscreens with these nanomaterials.

Characterization and Quantification of Natural and Anthropogenic Titanium-Containing Particles Using Single-Particle ICP-TOFMS

Titanium-containing nanoparticles (NPs) and submicrometer particles (μPs) in the environment can come from natural or anthropogenic sources. In this study, we investigate the use of single-particle inductively coupled plasma time-of-flight mass spectrometry (spICP-TOFMS) to measure and classify individual Ti-containing particles as either engineered (Ti-eng) or naturally occurring (Ti-nat) based on elemental composition and multielement mass ratios. We analyze mixtures of four Ti-containing particle types: anthropogenic food-grade TiO2 particles and particles from rutile, ilmenite, and biotite mineral samples. Through characterization of neat particle suspensions, we develop a decision-tree-based classification scheme to distinguish Ti-eng from Ti-nat particles and to classify individual Ti-nat particles by mineral type. Engineered TiO2 and rutile particles have the same major-element composition. To distinguish Ti-eng particles from rutile, we developed particle-type detection limits based on the average crustal abundance ratio of titanium to niobium. For our measurements, the average Ti mass needed to classify Ti-eng particles is 9.3 fg, which corresponds to a diameter of 211 nm for TiO2. From neat suspensions, we demonstrate classification rates of 55%, 32%, 75%, and 72% for Ti-eng, rutile, ilmenite, and biotite particles, respectively. Our classification approach minimizes false-positive classifications, with rates below 5% for all particle types. Individual Ti-eng particles can be accurately classified at the submicron size range, while the Ti-nat particles are classified in the nanoregime (diameter < 100 nm). Efficacy of our classification approach is demonstrated through the analysis of controlled mixtures of Ti-eng and Ti-nat and the analysis of natural streamwater spiked with Ti-eng particles. In control mixtures, Ti-eng particles can be measured and classified at particle-number concentrations (PNCs) 60-times lower than that of Ti-nat particles and across a PNC range of at least 3 orders of magnitude. In the streamwater sample, Ti-eng particles are classified at environmentally relevant PNCs that are 44-times lower than the background Ti-nat PNC and 2850-times lower than the total PNC.

Getting fat and stressed: Effects of dietary intake of titanium dioxide nanoparticles in the liver of turbot Scophthalmus maximus

The extensive use of nanomaterials, including titanium dioxide nanoparticles (TiO2 NPs), raises concerns about their persistence in ecosystems. Protecting aquatic ecosystems and ensuring healthy and safe aquaculture products requires the assessment of the potential impacts of NPs on organisms. Here, we study the effects of a sublethal concentration of citrate-coated TiO2 NPs of two different primary sizes over time in flatfish turbot, Scophthalmus maximus (Linnaeus, 1758). Bioaccumulation, histology and gene expression were assessed in the liver to address morphophysiological responses to citrate-coated TiO2 NPs. Our analyses demonstrated a variable abundance of lipid droplets (LDs) in hepatocytes dependent on TiO2 NPs size, an increase in turbot exposed to smaller TiO2 NPs and a depletion with larger TiO2 NPs. The expression patterns of genes related to oxidative and immune responses and lipid metabolism (nrf2, nfκb1, and cpt1a) were dependent on the presence of TiO2 NPs and time of exposure supporting the variance in hepatic LDs distribution over time with the different NPs. The citrate coating is proposed as the likely catalyst for such effects. Thus, our findings highlight the need to scrutinize the risks associated with exposure to NPs with distinct properties, such as primary size, coatings, and crystalline forms, in aquatic organisms.

Detection, distribution and environmental risk of metal-based nanoparticles in a coastal bay

Metal-based nanoparticles (NPs) attract increasing concerns because of their adverse effects on aquatic ecosystems. However, their environmental concentrations and size distributions are largely unknown, especially in marine environments. In this work, environmental concentrations and risks of metal-based NPs were examined in Laizhou Bay (China) using single-particle inductively coupled plasma-mass spectrometry (sp-ICP-MS). First, separation and detection approaches of metal-based NPs were optimized for seawater and sediment samples with high recoveries of 96.7% and 76.3%, respectively. Spatial distribution results showed that Ti-based NPs had the highest average concentrations for all the 24 stations (seawater, 1.78 × 108 particles/L; sediments, 7.75 × 1012 particles/kg), followed by Zn-, Ag-, Cu-, and Au-based NPs. For all the NPs in seawater, the highest abundance occurred around the Yellow River Estuary, resulting from a huge input from Yellow River. In addition, the sizes of metal-based NPs were generally smaller in sediments than those in seawater (22, 20, 17, and 16 of 22 stations for Ag-, Cu-, Ti-, and Zn-based NPs, respectively). Based on the toxicological data of engineered NPs, predicted no-effect concentrations (PNECs) to marine species were calculated as Ag at 72.8 ng/L < ZnO at 2.66 µg/L < CuO at 7.83 µg/L < TiO2 at 72.0 µg/L, and the actual PNECs of the detected metal-based NPs may be higher due to the possible presence of natural NPs. Station 2 (around the Yellow River Estuary) was assessed as "high risk" for Ag- and Ti-based NPs with risk characterization ratio (RCR) values of 1.73 and 1.66, respectively. In addition, RCRtotal values for all the four metal-based NPs were calculated to fully assess the co-exposure environmental risk, with 1, 20, and 1 of 22 stations as "high risk", "medium risk", and "low risk", respectively. This study helps to better understand the risks of metal-based NPs in marine environments.

Nanoparticulate pollutants in the environment: Analytical methods, formation, and transformation

The wide application of nanomaterials and plastic products generates a substantial number of nanoparticulate pollutants in the environment. Nanoparticulate pollutants are quite different from their bulk counterparts because of their unique physicochemical properties, which may pose a threat to environmental organisms and human beings. To accurately predict the environmental risks of nanoparticulate pollutants, great efforts have been devoted to developing reliable methods to define their occurrence and track their fate and transformation in the environment. Herein, we summarized representative studies on the preconcentration, separation, formation, and transformation of nanoparticulate pollutants in environmental samples. Finally, some perspectives on future research directions are proposed.

Withania somnifera-derived carbon dots protect human epidermal cells against UVB-induced cell death and support growth factor-mediated wound healing

Solar radiation comprising UVA and UVB regions is considered a skin-damaging factor inducing inflammation, oxidative stress, hyperpigmentation, and photo-aging. Photoluminescent carbon dots (CDs) were synthesized from the root extract of a Withania somnifera (L.) Dunal plant and urea, using a one-step microwave method. These Withania somnifera CDs (wsCDs) were 14.4 ± 0.18 d nm in diameter and presented photoluminescence. UV absorbance showed the presence of π-π* (C[double bond, length as m-dash]C) and n-π* (C[double bond, length as m-dash]O) transition regions in wsCDs. FTIR analysis indicated the presence of nitrogen and carboxylic functional groups on the surface of wsCDs. HPLC analysis of wsCDs showed the presence of withanoside IV, withanoside V, and withanolide A. The wsCDs were found to be biocompatible in human skin epidermal (A431) cells and hindered UVB irradiation-induced loss of metabolic activity and oxidative stress. The wsCDs supported rapid dermal wound healing through augmented TGF-β1 and EGF gene expression levels in A431 cells. Finally, wsCDs were found to be biodegradable through a myeloperoxidase-catalyzed peroxidation reaction. The study concluded that under in vitro conditions, Withania somnifera root extract-derived biocompatible carbon dots provided photo-protection against UVB-stimulated epidermal cell damage and supported rapid wound healing.

Toxicity of titanium dioxide nanoparticles on the histology, liver physiological and metabolism, and intestinal microbiota of grouper

Titanium dioxide nanoparticles (nano-TiO₂) are a common environmental pollutant threatening aquatic animals. The natural habitats and cultured environments of groupers make them vulnerable to nanoparticle pollution. In this study, hybrid grouper juveniles were separately exposed to 1 or 10 mg/L nano-TiO₂ for 14 days, and the toxicological response of these groupers were investigated. After nano-TiO₂ exposure, the liver showed apparent histopathology and intestinal goblet cells were also affected. The transcription of antioxidant and apoptosis-related genes were down-regulated, and the inflammatory factor TNF-α was up-regulated in the liver. The metabolite patterns of the liver were disturbed, especially amino acid metabolism. The diversity and composition of the intestinal microbiota were also altered especially the genera Lactobacillus and Nautella. The changes of several intestinal bacteria were correlated with the immune factors and metabolites of respective hosts. We concluded that nano-TiO₂ exposure negatively affects the physiological homeostasis of groupers.

Sunscreen exposure interferes with physiological processes while inducing oxidative stress in seagrass Posidonia oceanica (L.) Delile

The effects of a commercial sunscreen mixture on the Mediterranean seagrass Posidonia oceanica were investigated, evaluating its response in physiological processes and biochemical indicators of oxidative stress. Short-term laboratory experiments were conducted recreating summer conditions, and two sunscreen concentrations were tested in whole P. oceanica plants placed inside aquaria. Although primary productivity of leaf segments seemed to benefit from sunscreen addition, probably due to inorganic nutrients released, the rest of the biological parameters reflected possible impairments in the overall functioning of P. oceanica as a result of oxidative damages. Chlorophyll production and nitrogen fixation associated with old leaves were inhibited under high sunscreen concentrations, which concurred with elevated reactive oxygen species production, catalase activity and polyphenols content in the seagrass leaves. These results emphasize the importance of directing future investigations on determining which specific components of sunscreen products are likely threatening the wellbeing of critical species, such as P. oceanica.

Environmentally relevant concentrations of organic (benzophenone-3) and inorganic (titanium dioxide nanoparticles) UV filters co-exposure induced neurodevelopmental toxicity in zebrafish

UV filters, widely used in personal care products, are ubiquitous environmental pollutants detected and pose a significant public health concern. Benzophenone-3 (BP3) and titanium dioxide nanoparticles (nano-TiO₂) are the predominant organic and inorganic UV filters in environmental media. However, few studies have explored the combined developmental neurotoxic (DNT) effects and the underlying mechanisms when co-exposed to BP3 and nano-TiO₂. In the present study, zebrafish (Danio rerio) embryos were exposed to environmentally relevant concentrations of BP3 (10 μg/L), nano-TiO₂ (100 μg/L), and mixtures starting from 6 h post fertilization (hpf), respectively. Developmental indicators and motor behaviors were investigated at various developmental stages. Our results showed that BP3 alone or co-exposed with nano-TiO₂ increased spontaneous movement at 24 hpf, co-exposure decreased touch response at 30 hpf and hatching rate at 60 hpf. Consistent with these motor deficits, co-exposure to BP3 and nano-TiO₂ inhibited relative axon length of primary motor neuron during the early developmental stages, disturbed the expression of axonal growth-related genes at 30 and 48 hpf, increased cell apoptosis on the head region and mRNA levels of apoptosis-related genes, and also increased reactive oxygen species (ROS) levels in zebrafish, suggesting the functional relevance of structural changes. Taken together, our findings demonstrated that BP3 alone or in combination with nano-TiO₂ at environmentally relevant concentrations induced evident neurotoxic effects on the developing embryos in zebrafish.

A Novel Method for the Background Signal Correction in SP-ICP-MS Analysis of the Sizes of Titanium Dioxide Nanoparticles in Cosmetic Samples

We discuss the features involved in determining the titanium dioxide nanoparticle (TiO₂NP) sizes in cosmetic samples via single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) in the millisecond-time resolution mode, and methods for considering the background signal. In the SP-ICP-MS determination of TiO₂NPs in cosmetics, the background signal was recorded in each dwell time interval due to the signal of the Ti dissolved form in deionized water, and the background signal of the cosmetic matrix was compensated by dilution. A correction procedure for the frequency and intensity of the background signal is proposed, which differs from the known procedures due to its correction by the standard deviation above the background signal. Background signals were removed from the sample signal distribution using the deionized water signal distribution. Data processing was carried out using Microsoft Office Excel and SPCal software. The distributions of NP signals in cosmetic product samples were studied in the dwell time range of 4-20 ms. The limit of detection of the NP size (LOD_size) with the proposed background signal correction procedure was 71 nm. For the studied samples, the LOD_size did not depend on the threshold of the background signal and was determined by the sensitivity of the mass spectrometer.

The impact of biofilms and dissolved organic matter on the transport of nanoparticles in field-scale streams

The fate and transport of nanoparticles (NPs) in streams is critical for understanding their overall environmental impact. Using a unique field-scale stream at the Notre Dame-Linked Experimental Ecosystem Facility, we investigated the impact of biofilms and the presence of dissolved organic matter (DOM) on the transport of titanium dioxide (TiO₂) NPs. Experimental breakthrough curves were analyzed using temporal moments and fit using a mobile-immobile model. The presence of biofilms in the stream severely reduced the transport of the TiO₂ NPs, but this was mitigated by the presence of DOM. Under minimal biofilm conditions, the presence of DOM increased the mass recovery of TiO₂ from 4.2% to 32% for samples taken 50 m downstream. For thriving biofilm conditions only 0.5% of the TiO₂ mass was recovered (50 m), but the presence of DOM improved the mass recovery TiO₂ to 36%. The model was suitable for predicting early, peak, tail, and truncation time portions of the breakthrough curves, which attests to its ability to capture a range of processes in the mobile and immobile domains of the stream. The model outcomes supported the hypothesis that DOM changed the interaction of NP-biofilm from an irreversible to a reversible process. Collectively, these outcomes stress the importance of considering biogeological complexity when predicting the transport of NPs in streams.

Titanium dioxide nanoparticles decreases bioconcentration of azoxystrobin in zebrafish larvae leading to the alleviation of cardiotoxicity

Interactions between titanium dioxide nanoparticles (n-TiO₂) and pollutants in the aquatic environment may alter the bioavailability of pollutants, and thus altering their toxicity and fate. In order to investigate the bioconcentration of azoxystrobin (AZ) and its mechanism of cardiotoxicity in the presence of n-TiO₂, the experiment was divided into control, n-TiO₂ (100 μg/L), AZ (40, 200 and 1000 μg/L) and AZ (40, 200, 1000 μg/L) + n-TiO₂ groups, and the zebrafish embryos were exposed to the exposure solution until 72 h post-fertilization. Results suggested the presence of n-TiO₂ notably reduced the accumulation of AZ in larvae compared with exposure to AZ alone, thereby significantly decreasing AZ-induced cardiotoxicity, including heart rate changes, pericardium edema, venous thrombosis, increased sinus venosus and bulbus arteriosus distance and changes in cardiac-related gene expression. Further studies showed that AZ + n-TiO₂ together restrained total-ATPase and Ca²⁺-ATPase activities, while the activity of Na⁺K⁺-ATPase increased at first and then decreased. Furthermore, there were significant changes in the expressions of oxidative phosphorylation and calcium channel-related genes, suggesting mitochondrial dysfunction may be the potential mechanism of cardiotoxicity induced by AZ and n-TiO₂. This study supplies a new perspective for the joint action of AZ and environmental coexisting pollutants and provides a basis for ecological risk management of pesticides.

Nanoparticle Impact on the Bacterial Adaptation: Focus on Nano-Titania

Titanium dioxide nanoparticles (nano-titania/TiO₂ NPs) are used in different fields and applications. However, the release of TiO₂ NPs into the environment has raised concerns about their biosafety and biosecurity. In light of the evidence that TiO₂ NPs could be used to counteract antibiotic resistance, they have been investigated for their antibacterial activity. Studies reported so far indicate a good performance of TiO₂ NPs against bacteria, alone or in combination with antibiotics. However, bacteria are able to invoke multiple response mechanisms in an attempt to adapt to TiO₂ NPs. Bacterial adaption arises from global changes in metabolic pathways via the modulation of regulatory networks and can be related to single-cell or multicellular communities. This review describes how the impact of TiO₂ NPs on bacteria leads to several changes in microorganisms, mainly during long-term exposure, that can evolve towards adaptation and/or increased virulence. Strategies employed by bacteria to cope with TiO₂ NPs suggest that their use as an antibacterial agent has still to be extensively investigated from the point of view of the risk of adaptation, to prevent the development of resistance. At the same time, possible effects on increased virulence following bacterial target modifications by TiO₂ NPs on cells or tissues have to be considered.

Influence of TiO2 nanocomposite UV filter surface chemistry and their interactions with organic UV filters on uptake and toxicity toward cultured fish gill cells

Aquatic environments have been found to be contaminated with a variety of inorganic and organic UV filters. This includes novel nano-sized titanium dioxide (TiO₂) composite particles, which have been increasingly developed and incorporated into commercial sunscreens in recent years. So far, relatively little is known about the effects of this novel class of UV filters on aquatic life. Therefore, this study aimed to determine and compare the toxicity of three such nanoparticulate TiO₂ UV filters with different surface coatings, namely Eusolex® T-Avo (SiO₂-coated), T-Lite™ SF (Al(OH)₃/PDMS-coated), and Eusolex® T-S (Al₂O₃/stearic acid-coated) either alone, or in the presence of selected organic UV filters (octinoxate, avobenzone, octocrylene), toward fish using RTgill-W1 cell cultures as an in vitro experimental model. Besides standard exposure protocols, alternative approaches (i.e., exposure to water accommodated fractions (WAFs), hanging-drop exposure) were explored to account for nanoparticle (NP)-specific fate in the medium and obtain additional/complementary information on their toxicity in different conditions. The AlamarBlue, CFDA-AM and Neutral Red Retention (NR) assays were used to measure effects on different cellular endpoints. Transmission electron microscopy (TEM) was used to examine NP uptake. Our results showed that none of the TiO₂ NP UV filters were cytotoxic at the concentrations tested (0.1-10 µg/mL; 24 h) but there were differences in their uptake by the cells. Thus, only the hydrophilic T-AVO was detected inside cells, but the hydrophobic T-Lite SF and T-S were not. In addition, our results show that the presence of NPs (or the used dispersant) tended to decrease organic UV filter toxicity. The level of combination effect depended on both NP-type (surface chemistry) and concentration, suggesting that the reduced toxicity resulted from reduced availability of the organic UV filters due to their adsorption to the NP surface. Thus, mixtures of TiO₂ NP UV filters and organic UV filters may have a different toxicological profile compared to the single substances, but probably do not pose an increased hazard.

Insights on the Dynamics and Toxicity of Nanoparticles in Environmental Matrices

The manufacturing rate of nanoparticles (10–100 nm) is steadily increasing due to their extensive applications in the fabrication of nanoproducts related to pharmaceuticals, cosmetics, medical devices, paints and pigments, energy storage etc. An increase in research related to nanotechnology is also a cause for the production and disposal of nanomaterials at the lab scale. As a result, contamination of environmental matrices with nanoparticles becomes inevitable, and the understanding of the risk of nanoecotoxicology is getting larger attention. In this context, focusing on the environmental hazards is essential. Hence, this manuscript aims to review the toxic effects of nanoparticles on soil, water, aquatic, and terrestrial organisms. The effects of toxicity on vertebrates, invertebrates, and plants and the source of exposure, environmental and biological dynamics, and the adverse effects of some nanoparticles are discussed.

Quantifying impacts of titanium dioxide nanoparticles on natural assemblages of riverine phytobenthos and phytoplankton in an outdoor setting

Impacts of widespread release of engineered titanium dioxide nanoparticles (nTiO₂) on freshwater phytoplankton and phytobenthic assemblages in the field, represents a significant knowledge gap. Using outdoor experiments, we quantified impacts of nTiO₂ on phytoplankton and periphyton from UK rivers, applied at levels representative of environmentally realistic concentrations (0.05 mg/L) and hot spots of accumulation (5.0 mg/L). Addition of nTiO₂ to river water led to rapid temporal size changes in homoagglomerates and many heteroaggregates of nTiO₂ with cells in the phytoplankton, including green algae, pennate and centric diatoms, increasing settlement of some cells. Changes in phytoplankton composition were evident after 72-h resulting from a significant decline in the relative abundance of very small phytoplankton cells (1-3 μm), often accompanied by increases in centric diatoms at both concentrations. Significant changes detected in the composition of the phytobenthos after 12 days, following nTiO₂ treatments, were not evident when using benthic diatoms alone after 56 days. A lack of inhibition in the maximum quantum yield (Fv/Fm) in phytobenthos after 72-h exposures contrasted with a significant inhibition in Fv/Fm in 75% of phytoplankton samples, the highest recorded in Rutile nTiO₂ exposures at both concentrations of nTiO₂. After 12 days, strong positive stimulatory responses were recorded in the maximum relative electron transport rate (rETR_max) and the maximum non-photochemical coefficient (NPQ_max), in phytoplankton and phytobenthos samples exposed to the higher Anatase nTiO₂ concentration, were not measured in Rutile exposed biota. Collectively, these results indicate that the Rutile phase of nTiO₂ has more negative impacts on freshwater algae than the Anatase form, at specific time scales, and phytoplankton may be more impacted by nTiO₂ than phytobenthos. We caution that repeated release of nTiO₂, could lead to significant changes in riverine algal biomass and species composition, dependent on the phase and concentration of nTiO₂.

Temporal variability in TiO2 engineered particle concentrations in rural Edisto River

Titanium dioxide (TiO₂) is widely used in engineered particles including engineered nanomaterial (ENM) and pigments, yet its occurrence, concentrations, temporal variability, and fate in natural environmental systems are poorly understood. For three years, we monitored TiO₂ concentrations in a rural river basin (Edisto River, < 1% urban land cover) in South Carolina, United States. The total concentrations of Ti, Nb, Al, Fe, Ce, and La in the Edisto River trended higher during spring/summer compared to autumn/winter. Upward trending Ti/Nb ratio in the spring/summer compared to near-background autumn/winter ratios of 255.7 ± 8.9 indicated agricultural preparation and growing-season-related increases in TiO₂ engineered particles. In contrast, downward trending of the Ti/Al and Ti/Fe ratios in the spring and summer compared to the near-background autumn/winter ratios of 0.05 indicated greater mobilization of Fe and Al, relative to Ti during spring/summer. Surface-water concentrations of TiO₂ engineered particles varied between 0 and 128.7 ± 3.9 μg TiO₂ L^-1. Increases in TiO₂ concentrations over the spring/summer were associated with increases in phosphorus, orthophosphate, nitrate, ammonia, anthropogenic gadolinium, water temperature, suspended sediments, organic carbon, and alkalinity, and with decreases in dissolved oxygen. The association between these contaminants together with the timing of the increases in their concentrations is consistent with diffuse wastewater sources, such as reuse application overspray, biosolids fertilization, leaking sewers, or septic tanks, as the driver of instream concentrations; however, other diffuse sources cannot be ruled out. The findings of this study indicate spatially-distributed (non-point source) releases can result in high concentrations of TiO₂ engineered particles, which may pose higher risks to rural stream aquatic ecosystems during the agricultural season. The results illustrate the importance of monitoring seasonal variations in engineered particles concentrations in surface waters for a more representative assessment of ecosystem risk.

Exposure of adult sand dollars (Scaphechinus mirabilis) (Agassiz, 1864) to copper oxide nanoparticles induces gamete DNA damage

The increase in the number of products containing nanoparticles (NPs) poses a real threat to the environment. Recently, more evidence has been added to predictive models about the presence of NPs in various natural and anthropogenic systems. The acute toxicity of most aquatic NPs has now been well documented. However, data such as the ecotoxicological significance of the long-lasting effects of NPs on the reproductive system and gamete quality of aquatic organisms are still relatively scarce. Therefore, a 10-day experiment was carried out on the sand dollar Scaphechinus mirabilis (Agassiz, 1864) exposed to low (20 and 40 μg/L) concentrations of copper oxide nanoparticles (CuO NPs). An accumulation of copper in tissues and a significant increase in lipid peroxidation product concentrations after exposure to NP were observed. A significant decrease in the fertilization rate was shown at 40 μg/L. No significant changes in embryonic or larval development were found. However, comet analysis results showed a significant increase in DNA damage in spermatozoa exposed to CuO NPs, which may further manifest as negative effects at later developmental stages or in subsequent generations.

Ammonia in the presence of nano titanium dioxide (nano-TiO2) induces greater oxidative damage in the gill and liver of female zebrafish

Water pollution caused by a highly hazardous chemical ammonia and a widespread application nanomaterials-nano titanium dioxide (n-TiO₂) in nature water has attracted extensive concern of the world. However, the potential joint effects of the two factors are unknown. Aim to investigate the potential interactive effects of ammonia and n-TiO₂ and the behind mechanisms, adult female zebrafish (Danio rerio) were co-exposed for 8 weeks by total ammonia nitrogen (TAN; 0, 3, 30 mg/L) and n-TiO₂ (0, 0.1, 1 mg/L) in different combination conditions based on a full-factorial design. The analysis of absorption kinetics confirmed that n-TiO₂ could absorb free ammonia (NH₃) in aqueous solution and the loss rate of free NH₃ increased with the rise of n-TiO₂ concentration. Consistent with this, free NH₃ concentrations in the gill and liver were higher in the presence of n-TiO₂ compared to TAN exposure alone. The increases of MDA and PC concentrations in the gill and liver of fish indicated that TAN and n-TiO₂ alone or in combination caused oxidative stress. Simultaneously, the activity and transcription of antioxidant enzymes (T-SOD, CuZn-SOD, Mn-SOD, CAT, GPx and GST) as well as antioxidant GSH contents were extensively inhibited by TAN and n-TiO₂ via Nrf2-Keap1 signaling. The significant interactive effects of TAN and n-TiO₂ were detected on levels of GSH, GST and gstr1 mRNA in the gill, and on levels of GSH, T-SOD, Mn-SOD, CAT levels as well as gpx1a and keap1 mRNAs in the liver, implying synergistic toxic risk of TAN and n-TiO₂. The more severe histopathological alterations and higher IBR analysis in co-treatment groups further proved that the existence of n-TiO₂ excavated ammonia-induced toxicity in the gill and liver, especially in liver. In conclusion, ammonia and n-TiO₂ have a synergistic toxic risk of fish health because ammonia and n-TiO₂ cause oxidative-antioxidative imbalance by inducing ROS overproduction.

Environmental Fate of Metal Nanoparticles in Estuarine Environments

In the last decade, metal engineered nanomaterials (ENMs) have seen an exponential use in many critical technologies and products, as well an increasing release into the environment. Coastal ecosystems worldwide may receive ENM-polluted waters and wastes, with a consequent alteration of habitats and contamination of aquatic biota. There is a scarcity of data regarding the fate of these emerging contaminants in such environments. Open issues include the determination of the sources, the quantification of the interactions with marine sediments, the bioaccumulation pathways, the ecotoxicology on marine fauna and the identification of the principal biotic and abiotic factors that may alter metal ENMs toxicity. Little is known about their potential transference into the food web, as well toxicity features and co-stressors of single or multiple ENMs under laboratory and real environmental conditions for various taxonomic phyla. This review reports current knowledge on the ecological impact of ENMs under the complex environmental conditions of estuary systems, identifies gaps in current knowledge and provides directions for future research.

Following the Occurrence and Origin of Titanium Dioxide Nanoparticles in the Sava River by Single Particle ICP-MS

Titanium dioxide nanoparticles (TiO2NPs) are widely produced and used NPs in different applications. To evaluate the risk from anthropogenic TiO2NPs, more information is needed on their occurrence in the environment. For the first time, this study reports the levels of TiO2NPs in waters and sediments at selected sampling sites along the Sava River using inductively coupled plasma mass spectrometry in single particle mode (spICP-MS). The highest concentrations of TiO2NPs were determined in river water at Vrhovo (VRH), Jasenovac (JAS), and Slavonski Brod (SLB) sampling locations impacted by urban, agricultural, and/or industrial activities, suggesting that these NPs are likely of anthropogenic origin. The results further showed that hydrological conditions and sediment composition significantly influence the levels of TiO2NPs in river water at most locations. Moreover, the Ti/Al elemental concentration ratios of NPs in water and sediments at JAS were higher than the natural background ratios, further confirming their anthropogenic origin. The outcome of this study provides first information on the presence of (anthropogenic) TiO2NPs in different environmental compartments of the Sava River, contributing to more reliable risk assessments and better regulation of TiO2NPs emissions in the future.

Transport of nanoparticulate TiO2 UV-filters through a saturated sand column at environmentally relevant concentrations

The fate of sunscreen residues released during bathing activities around recreational areas is an emerging concern regarding the potential ecotoxicity of some of their ingredients, including nanoparticulate TiO₂ UV-filters. To assess the extent of contamination in the natural medium, sand-packed column experiments were carried out with bare TiO₂ engineered nanoparticles (ENPs) and two commercial nano-TiO₂ UV-filters coated with either SiO₂ (hydrophilic) or a combination of Al₂O₃ and simethicone (amphiphilic). The high sensitivity of (single particle)ICPMS online monitoring of the breakthrough curves made it possible to inject the ENPs at trace levels (2-100 μg L^-1) in eluents composed of 10^-3 and 10^-2 M NaCl and pHs of 5.7 and 7.8. The deposition of all ENPs in the sand increased with the ionic strength and decreased with the pH of the carrier. Both bare and SiO₂-coated ENPs showed a clear control by the electrostatic interactions between the particles and the quartz grains surfaces, in partial agreement with classical DLVO theory. Unexpectedly high rates of transfer were observed with the amphiphilic UV-filter, which could be explained by the addition of a contribution to the DLVO model to account for the steric repulsion between the sand collector and the polysiloxane surface layer of this ENP. These results demonstrate the major role played by the coating of UV-filters regarding their fate in porous media like soils, sediments and aquifers.

Sorption of Fulvic Acids onto Titanium Dioxide Nanoparticles Extracted from Commercial Sunscreens: ToF-SIMS and High-Dimensional Data Analysis

Titanium dioxide nanoparticles (n-TiO2) are common ingredients of sunscreens and are often released into surface waters during usage. Once released, the surface chemistry of n-TiO2 changes by interacting with dissolved organic matter (DOM). In previous studies, these interactions were investigated using model n-TiO2 and; therefore, do not account for the complex composition of the coating of n-TiO2 aged in sunscreens. Taking advantage of a mild extraction method to provide more realistic nanoparticles, we investigated the potentials of time of flight-secondary ion mass spectrometry (ToF-SIMS) combined with high-dimensional data analysis to characterize the sorption of fulvic acids, as a model for DOM, on titanium dioxide nanoparticles extracted from ten different commercial sunscreens (n-TiO2 ⸦ sunscreen). Clustering analysis confirmed the ability of ToF-SIMS to detect the sorption of fulvic acids. Moreover, a unique sorption pattern was recognized for each n-TiO2 ⸦ sunscreen, which implied different fractionation of fulvic acids based on the initial specifications of nanoparticles, e.g., size, coating, etc. Furthermore, random forest was used to extract the most important fragments for predicting the presence of fulvic acids on the surface of n-TiO2 ⸦ sunscreen. Finally, we evaluate the potential of ToF-SIMS for characterizing the sorption layer.

Leaching of Titanium Dioxide Nanomaterials from Agricultural Soil Amended with Sewage Sludge Incineration Ash: Comparison of a Pilot Scale Simulation with Standard Laboratory Column Elution Experiments

Nanoscale titanium dioxide (nTiO₂ (Hombikat UV 100 WP)) was applied to sewage sludge that was incinerated in a large-scale waste treatment plant. The incineration ash produced was applied to soil as fertilizer at a realistic rate of 5% and investigated in pilot plant simulations regarding its leaching behavior for nTiO₂. In parallel, the applied soil material was subject to standard column leaching (DIN 19528) in order to test the suitability of the standard to predict the leaching of nanoscale contaminants from treated soil material. Relative to the reference material (similar composition but without nTiO₂ application before incineration) the test material had a total TiO₂ concentration, increased by a factor of two or 3.8 g/kg, respectively. In contrast, the TiO₂ concentration in the respective leachates of the simulation experiment differed by a factor of around 25 (maximum 91.24 mg), indicating that the added nTiO₂ might be significantly mobilisable. Nanoparticle specific analysis of the leachates (spICP-MS) confirmed this finding. In the standard column elution experiment the released amount of TiO₂ in the percolates between test and reference material differed by a factor of 4 to 6. This was also confirmed for the nTiO₂ concentrations in the percolates. Results demonstrate that the standard column leaching, developed and validated for leaching prediction of dissolved contaminants, might be also capable to indicate increased mobility of nTiO₂ in soil materials. However, experiments with further soils are needed to verify those findings.

Mediterranean seagrass Posidonia oceanica accumulates sunscreen UV filters

Certain ultra-violet filter (UVF) components of solar creams have negative impacts on coral reefs and have been prohibited in international tourism destinations (i.e., Hawaii, Florida, and Palau) to protect coral reefs. In the Mediterranean coasts which are also hotspots of international tourism and where endemic seagrass Posidonia oceanica forms extensive meadows, the accumulation of UVF components have not been studied. We report for the first time, that the rhizomes of P. oceanica internally accumulated UVFs BP3, BP4, AVO, 4MBC and MeBZT and the paraben preservative MePB. The components BP4 and MePB occurred in higher concentrations reaching up to 129 ng g^-1 dw and 512 ng g^-1 dw, respectively. This work emphasizes the need for more experimental studies on the effects of UVFs on seagrasses and check if we should follow suit to prohibit certain UVFs to protect this species as what has been done in other regions to protect corals.

Nanotechnology in the Restoration of Polluted Soil

The advancements in nanoparticles (NPs) may be lighting the sustainable and eco-friendly path to accelerate the removal of toxic compounds from contaminated soils. Many efforts have been made to increase the efficiency of phytoremediation, such as the inclusion of chemical additives, the application of rhizobacteria, genetic engineering, etc. In this context, the integration of nanotechnology with bioremediation has introduced new dimensions for revamping the remediation methods. Hence, advanced remediation approaches combine nanotechnological and biological remediation methods in which the nanoscale process regulation supports the adsorption and deterioration of pollutants. Nanoparticles absorb/adsorb a large variety of contaminants and also catalyze reactions by lowering the energy required to break them down, owing to their unique surface properties. As a result, this remediation process reduces the accumulation of pollutants while limiting their spread from one medium to another. Therefore, this review article deals with all possibilities for the application of NPs for the remediation of contaminated soils and associated environmental concerns.

Environmental Fate and Toxicity of Sunscreen-Derived Inorganic Ultraviolet Filters in Aquatic Environments: A Review

An increasing number of inorganic ultraviolet filters (UVFs), such as nanosized zinc oxide (nZnO) and titanium dioxide (nTiO2), are formulated in sunscreens because of their broad UV spectrum sunlight protection and because they limit skin damage. However, sunscreen-derived inorganic UVFs are considered to be emerging contaminants; in particular, nZnO and nTiO2 UVFs have been shown to undergo absorption and bioaccumulation, release metal ions, and generate reactive oxygen species, which cause negative effects on aquatic organisms. We comprehensively reviewed the current study status of the environmental sources, occurrences, behaviors, and impacts of sunscreen-derived inorganic UVFs in aquatic environments. We find that the associated primary nanoparticle characteristics and coating materials significantly affect the environmental behavior and fate of inorganic UVFs. The consequential ecotoxicological risks and underlying mechanisms are discussed at the individual and trophic transfer levels. Due to their persistence and bioaccumulation, more attention and efforts should be redirected to investigating the sources, fate, and trophic transfer of inorganic UVFs in ecosystems.

Temporal variation in TiO2 engineered particle concentrations in the Broad River during dry and wet weathers

Titanium dioxide (TiO₂) engineered particles are widely used in the urban environment as pigments in paints, and as active ingredients in photocatalytic coatings. Consequently, studies are necessary to quantify TiO₂ engineered particle concentrations and their temporal variability in surface waters to gain better understanding about their abundance and environmental fate in order to minimize their potential environmental impacts. The objective of this study was to determine the temporal variability in the concentration of TiO₂ engineered particles in the Broad River, Columbia, South Carolina, United States during dry and wet weather conditions and to examine the relationship between flow discharge, water quality indicators, and the concentration of TiO₂ engineered particles. TiO₂ engineered particle concentration in the Broad River water was determined by mass balance calculation using bulk titanium concentration and the increase in Ti/Nb ratio above the natural background ratio. The relative abundance of single metal and multi-metal Ti-bearing particles was determined by single particle-inductively coupled plasma-time of flight-mass spectrometer (SP-ICP-TOF-MS). Additionally, the elemental ratios of Ti/Nb, Ti/Al, and Ti/Fe within multi-metal Ti-bearing particles were determined at the single particle level. Discharge, bulk elemental concentrations (e.g., Ti, Al, Fe, and Nb), bulk elemental ratios (e.g., Ti/Al, Ti/Fe, and Ti/Nb), TiO₂ engineered particle concentration, and turbidity displayed the same trend of rise and fall following storm events. Linear relationships were established between turbidity and TiO₂ engineered particle concentrations in the Broad River for different flow regimes. However, no correlation was observed between TiO₂ engineered particle concentrations and flow discharge, dissolved oxygen, pH, or ionic strength. The established correlations between turbidity and TiO₂ engineered particle concentrations are important as they can be used to translate the continuously monitored turbidity to TiO₂ concentrations.

Towards Standardization for Determining Dissolution Kinetics of Nanomaterials in Natural Aquatic Environments: Continuous Flow Dissolution of Ag Nanoparticles

The dissolution of metal-based engineered nanomaterials (ENMs) in aquatic environments is an important mechanism governing the release of toxic dissolved metals. For the registration of ENMs at regulatory bodies such as REACH, their dissolution behavior must therefore be assessed using standardized experimental approaches. To date, there are no standardized procedures for dissolution testing of ENMs in environmentally relevant aquatic media, and the Organisation for Economic Co-operation and Development (OECD) strongly encourages their development into test guidelines. According to a survey of surface water hydrochemistry, we propose to use media with low concentrations of Ca²⁺ and Mg²⁺ for a better simulation of the ionic background of surface waters, at pH values representing acidic (5 < pH < 6) and near-neutral/alkaline (7 < pH < 8) waters. We evaluated a continuous flow setup adapted to expose small amounts of ENMs to aqueous media, to mimic ENMs in surface waters. For this purpose, silver nanoparticles (Ag NPs) were used as model for soluble metal-bearing ENMs. Ag NPs were deposited onto a 10 kg.mol⁻¹ membrane through the injection of 500 µL of a 5 mg.L⁻¹ or 20 mg.L⁻¹ Ag NP dispersion, in order to expose only a few micrograms of Ag NPs to the aqueous media. The dissolution rate of Ag NPs in 10 mM NaNO₃ was more than two times higher for ~2 µg compared with ~8 µg of Ag NPs deposited onto the membrane, emphasizing the importance of evaluating the dissolution of ENMs at low concentrations in order to keep a realistic scenario. Dissolution rates of Ag NPs in artificial waters (2 mM Ca(NO₃)₂, 0.5 mM MgSO₄, 0–5 mM NaHCO₃) were also determined, proving the feasibility of the test using environmentally relevant media. In view of the current lack of harmonized methods, this work encourages the standardization of continuous flow dissolution methods toward OECD guidelines focused on natural aquatic environments, for systematic comparisons of nanomaterials and adapted risk assessments.

Sample preparation for the analysis of nanoparticles in natural waters by single particle ICP-MS

With the significant increase in the production and use of nanoparticles (NP), concern is increasing over their release into their environment. Single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) is emerging as one of the best techniques for detecting the very small NP at very low concentrations in natural waters. However, there is no unified protocol for the preparation of natural water samples for SP-ICP-MS analysis. In order to minimize nebulizer blockage, filtration is often used with the expectation that 0.45 μm membranes will not remove significant quantities of 1-100 nm NP. Nonetheless, there are limited data on its effect on the concentrations or size distributions of the NP. To that end, we examined the interactions between six different membrane filters and silver (Ag) and cerium oxide (CeO₂) NP in aqueous samples. For Ag NP, the highest recoveries were observed for polypropylene membranes, where 55% of the pre-filtration NP were found in rainwater and 75% were found in river waters. For CeO₂ NP, recoveries for the polypropylene membrane attained 60% in rainwater and 75% in river water. Recoveries could be increased to over 80% by pre-conditioning the filtration membranes with a multi-element solution. Similar recoveries were obtained when samples were centrifuged at low centrifugal forces (≤1000×g).

Titanium nanoparticles fate in small-sized watersheds under different land-uses

Surface waters from three catchments having contrasting land-uses (forested, agricultural, and urban) were sampled monthly and analysed for nanoparticulate titanium dioxide (NPs-TiO₂) by single particle ICPMS and electron microscopy. We report one-year of data for NPs-TiO₂ having average number and mass concentrations of 9.1 × 10⁸ NPs-TiO₂ particles L^-1 and 11 µg NPs-TiO₂ L^-1 respectively. An increase in concentration during warmer months is observed in the forested and agricultural catchments. Both concentrations of NPs-TiO₂ are within the range of recently reported values using similar analytical approaches. The positive correlations for NPs-TiO₂ mass concentration or particle number with the concentration of some trace elements and DOC in the forested and agricultural catchments suggest the detected NPs-TiO₂ in these two systems are mostly from geogenic origin. Additionally, microscopy imaging confirmed the presence of NPs in the three catchments. Furthermore, the land-area normalized annual flux of NPs-TiO₂ (1.65 kg TiO₂ year^-1 km^-2) was highest for the agricultural catchment, suggesting that agricultural practices have a different impact on the NPs-TiO₂ dynamics and exports than other land-uses (urban or forestry). A similar trend is also found by the reanalysis of recent literature data.

Critical review of the characteristics, interactions, and toxicity of micro/nanomaterials pollutants in aquatic environments

A wide range of contaminants of emerging concern such as micro/nanoplastics (MPs/PNPs) and metal-nanoparticles (Me-NPs) from anthropogenic activities have been identified in aquatic environments. The hazardous effects of these micro/nanomaterials as pollutants in organisms and the lack of knowledge about their behavior in aquatic environments have generated growing concern in the scientific community. The nanomaterials have a colloidal-type behavior due to their size range but with differences in their physicochemical properties. This review comprises the behavior of micro/nanomaterials pollutants and the physicochemical interactions between MPs/PNPs and Me-NPs in aquatic environments, and their potential toxicological effects in organisms. Moreover, this article describes the potential use of Me-NPs to remove MPs/PNPs present in the water column due to their photocatalytic and magnetic properties. It also discusses the challenge to determine harmful effects of micro/nanomaterials pollutants in organisms and provides future research directions to improve integrated management strategies to mitigate their environmental impact.

Ecotoxicological screening of UV-filters using a battery of marine bioassays

The present study aimed to assess the toxicity of seven UV-filters: zinc oxide nanoparticles (nZnO, particle size <100 nm), titanium dioxide nanoparticles (nTiO₂, primary particle size 21 nm), 2-ethylhexyl-4-methoxycinnamate (EHMC), 4-methylbenzylidene camphor (4-MBC), avobenzone (AVO), octocrylene (OCTO) and benzophenone-3 (BP-3) on three species: Aliivibrio fischeri (inhibition of bioluminescence), Phaeodactylum tricornutum (growth inhibition) and Ficopomatus enigmaticus (larval development success). Results showed nTiO₂ to be the most toxic for P. tricornutum (EC₅₀ 0.043 mg L^-1), while no effect was observed in A. fischeri and F. enigmaticus. EHMC was the most toxic to A. fischeri (EC₅₀ 0.868 mg L^-1 (15 min) and 1.06 mg L^-1 (30 min)) and the second most toxic to P. tricornutum. For F. enigmaticus, the lowest percentages of correct development resulted from 4-MBC exposure, with EC₅₀ of 0.836 mg L^-1. Overall, AVO induced low toxicity to every assessed species and OCTO was the least toxic for F. enigmaticus larvae. Considering the results obtained for F. enigmaticus, further larval development assays were performed with nZnO and EHMC under different light (light vs darkness) and temperature (20 and 25 °C) conditions, showing higher percentages of correct development at 25 °C, independently on light/darkness conditions. Under different temperature and photoperiod conditions, nZnO was more toxic than EHMC. Overall, nZnO and EHMC were among the most toxic UV filters tested and, when testing the effects of these UV-filters with temperature the results highlight that the impacts are liable to be lessened at higher temperatures (25 °C compared with 20 °C), in the case of this estuarine polychaete species. Nevertheless, further experiments are necessary to describe the effects of these two UV-filters at different organization levels, to study the toxicity of eventual degradation by-products and to provide more information on the combination of different stressors.

Characterization of Ti-containing nanoparticles in the aquatic environment of the Tamsuei River Basin in northern Taiwan

Titanium dioxide (TiO₂) is commonly contained in many commercial products and there are concerns about its release into the aquatic environment after use. This study was designed to characterize the distribution of Ti-containing nanoparticulates (NPs) in the water of the Tamsuei River Basin in northern Taiwan. Water samples were collected from the upstream, mid-stream, and downstream areas of the Tamsuei River Basin and analyzed with single-particle ICPMS to profile the Ti-containing NPs in terms of mass concentration, number concentration and particulate size. The lowest mass concentration of Ti-containing NPs, 1.04 ± 0.04 μg/L, was found in the upstream water samples, while the highest mass concentration, 31.7 ± 0.6 μg/L, was observed in downstream samples; there was an increasing trend from upstream to downstream. The highest particulate number concentration, 479 ± 163 × 10³/mL, was observed for the downstream samples, but the lowest concentration, 45.4 ± 5.6 × 10³/mL, was found in the mid-stream water samples taken from Site C. Moreover, the average mode values for particulate sizes were approximately 50 nm for all samples, although a relatively larger average mode value of 62 ± 5.7 nm was observed in the mid-stream samples from Site A. Increasing mass concentrations and particulate number concentrations from upstream to downstream implied that these NPs might have originally resulted from anthropogenic activities involving the use of TiO₂ NPs-containing products. Surprisingly, however, the lowest number concentrations for Ti-containing NPs in the mid-stream samples can probably be attributed to the fact that the corresponding sampling sites were located in the water preservation zone, which exhibits a particle-settling effect. Additionally, the sizes of Ti-containing NPs in downstream samples were not significantly larger than those in the upstream and mid-stream samples, as expected, which was probably due to the steric effects resulting from the presence of large amounts of macromolecule polymers in aquatic environments.

UV-filter pollution: current concerns and future prospects

UV-filters are widely used in cosmetics and personal care products to protect users' skin from redamage caused by ultraviolet (UV) radiation from the sun. Globally, an estimated 16,000 to 25,000 tonnes of products containing UV-filters were used in 2014 with modern consumption likely to be much higher. Beyond this use in cosmetics and personal care products, UV-filters are also widely used to provide UV-stability in industrial products such as paints and plastics. This review discusses the main routes by which UV-filters enter aquatic environments and summarises the conclusions of studies from the past 10 years that have investigated the effects of UV-filters on environmentally relevant species including corals, microalgae, fish, and marine mammals. Safety data regarding the potential impact of UV-filters on human health are also discussed. Finally, we explore the challenges surrounding UV-filter removal and research on more environmentally friendly alternatives to current UV-filters.

Aquatic Toxicity Effects and Risk Assessment of 'Form Specific' Product-Released Engineered Nanomaterials

The study investigated the toxicity effects of 'form specific' engineered nanomaterials (ENMs) and ions released from nano-enabled products (NEPs), namely sunscreens, sanitisers, body creams and socks on Pseudokirchneriella subcapitata, Spirodela polyrhiza, and Daphnia magna. Additionally, risk estimation emanating from the exposures was undertaken. The ENMs and the ions released from the products both contributed to the effects to varying extents, with neither being a uniform principal toxicity agent across the exposures; however, the effects were either synergistic or antagonistic. D. magna and S. polyrhiza were the most sensitive and least sensitive test organisms, respectively. The most toxic effects were from ENMs and ions released from sanitisers and sunscreens, whereas body creams and sock counterparts caused negligible effects. The internalisation of the ENMs from the sunscreens could not be established; only adsorption on the biota was evident. It was established that ENMs and ions released from products pose no imminent risk to ecosystems; instead, small to significant adverse effects are expected in the worst-case exposure scenario. The study demonstrates that while ENMs from products may not be considered to pose an imminent risk, increasing nanotechnology commercialization may increase their environmental exposure and risk potential; therefore, priority exposure cases need to be examined.

Elemental fingerprints in natural nanomaterials determined using SP-ICP-TOF-MS and clustering analysis

Detection and quantification of engineered nanomaterials in environmental systems require precise knowledge of the elemental composition, association, and ratios in homologous natural nanomaterials (NNMs). Here, we characterized soil NNMs at the single particle level using single particle-inductively coupled plasma-time of flight-mass spectrometer (SP-ICP-TOF-MS) in order to identify the elemental purity, composition, associations, and ratios within NNMs. Elements naturally present as a major constituent in NNMs such as Ti, and Fe occurred predominantly as pure/single metals, whereas elements naturally present at trace levels in NNMs occurred predominantly as impure/multi-metal NNMs such as V, Nb, Pr, Nd, Sm, Eu, Gd, Tb, Er, Dy, Yb, Lu, Hf, Ta, Pb, Th, and U. Other elements occurred as a mixture of single metal and multi-metal NNMs such as Al, Si, Cr, Mn, Ni, Cu, Zn, Ba, La, Ce, W, and Bi. Thus, elemental purity can be used to differentiate ENMs vs. NNMs only for those elements that occur at trace level in NNMs. We also classified multi-metal NNM into clusters of similar elemental composition and determined their mean elemental composition. Six major clusters accounted for more than 95% of the detected multi-metal NNMs including Al-, Fe-, Ti-, Si-, Ce-, and Zr-rich particles' clusters. The elemental composition of these multi-metal NNM clusters is consistent with naturally occurring minerals. Titanium occurred as a major element (>70% of the total metal mass in NNMs) in Ti-rich cluster and as a minor (<25% of the total metal mass in NNMs) element in likely clay, titanomagnetite, and aluminum oxide phases. Two rare earth element (REE) clusters were identified, characteristic of light REEs and heavy REEs. The findings of this study provide a methodology and baseline information on the elemental composition, associations, and ratios of NNMs, which can be used to differentiate NNMs vs. ENMs in environmental systems.