Studies of cobalt-mediated electrocatalytic CO2 reduction using a redox-active ligand

Impact of the Surface Microenvironment on the Redox Properties of a Co-Based Molecular Cathode for Selective Aqueous Electrochemical CO2-to-CO Reduction

Electrode-confined molecular catalysts are promising systems to enable the efficient conversion of CO2 to useful products. Here, we describe the development of an original molecular cathode for CO2 reduction to CO based on the noncovalent integration of a tetraazamacrocyclic Co complex to a carbon nanotube-based matrix. Aqueous electrochemical characterization of the modified electrode allowed for clear observation of a change of redox behavior of the Co center as surface concentration was tuned, highlighting the impact of the catalyst microenvironment on its redox properties. The molecular cathode enabled efficient CO2-to-CO conversion in fully aqueous conditions, giving rise to a turnover number (TONCO) of up to 20 × 103 after 2 h of constant electrolysis at a mild overpotential (η = 450 mV) and with a faradaic efficiency for CO of about 95%. Post operando measurements using electrochemical techniques, inductively coupled plasma, X-ray photoelectron spectroscopy and X-ray absorption spectroscopy characterization of the films demonstrated that the catalysis remained of molecular nature, making this Co-based electrode a new promising alternative for molecular electrocatalytic conversion of CO2-to-CO in fully aqueous media.

Carbon nanotube heterogenization improves cobalt pyridyldiimine complex CO2 reduction activity in aqueous carbonate buffer

We present two novel cobalt pyridyldiimine complexes functionalized with pyrene. Initially modest in homogeneous acetonitrile solution, their electrocatalytic CO2 reduction performance significantly improves upon immobilization on MWCNTs in an aqueous carbonate buffer. The complexes exhibit outstanding stability, with CO selectivity exceeding 97%, and TON and TOF values reaching up to 104 and above 1.2 s-1, respectively.

Ligand-Bound CO2 as a Nonclassical Route toward Efficient Photocatalytic CO2 Reduction with a Ni N-Confused Porphyrin

Implementing the synergistic effects between the metal and the ligand has successfully streamlined the energetics for CO2 activation and gained high catalytic activities, establishing the important breakthroughs in photocatalytic CO2 reduction. Herein, we describe a Ni(II) N-confused porphyrin complex (NiNCP) featuring an acidic N-H group. It is readily deprotonated and exists in an anion form during catalysis. Owing to this functional site, NiNCP gave rise to an outstanding turnover number (TON) as high as 217,000 with a 98% selectivity for CO2 reduction to CO, while the parent Ni(II) porphyrin (NiTPP) was found to be nearly inactive. Our mechanistic analysis revealed a nonclassical reaction pattern where CO2 was effectively activated via the attack of the Lewis-basic ligand. The resulting ligand-bound CO2 adduct could be further reduced to produce CO. This new metal-ligand synergistic effect is anticipated to inspire the design of highly active catalysts for small molecule activations.

Electrocatalytic Reduction of CO2 to CO by Molecular Cobalt-Polypyridine Diamine Complexes

Cobalt complexes have previously been reported to exhibit high faradaic efficiency in reducing CO2 to CO. Herein, we synthesized capsule-like cobalt-polypyridine diamine complexes [Co(L1)](BF4)2 (1) and [Co(L2) (CH3CN)](BF4)2 (2) as catalysts for the electrocatalytic reduction of CO2. Under catalytic conditions, complexes 1 and 2 demonstrated the electrocatalytic reduction of CO2 to CO in the presence or absence of CH3OH as a proton source. Experimental and computational studies revealed that complexes 1 and 2 undergo two consecutive reversible one-electron reductions on the cobalt core, followed by the addition of CO2 to form a metallocarboxylate intermediate [CoII(L)-CO22-]0. This crucial reaction intermediate, which governs the catalytic cycle, was successfully detected using high resolution mass spectrometry (HRMS). In situ Fourier-transform infrared spectrometer (FTIR) analysis showed that methanol can enhance the rate of carbon-oxygen bond cleavage of the metallocarboxylate intermediate. DFT studies on [CoII(L)-CO22-]0 have suggested that the doubly reduced species attacks CO2 on the C atom through the dz2 orbital, while the interaction with CO2 is further stabilized by the π interaction between the metal dxz or dxz orbital with p orbitals on the O atoms. Further reductions generate a metal carbonyl intermediate [CoI(L)-CO]+, which ultimately releases CO.

Bioinspired Binickel Catalyst for Carbon Dioxide Reduction: The Importance of Metal-ligand Cooperation

Catalyst design for the efficient CO2 reduction reaction (CO2RR) remains a crucial challenge for the conversion of CO2 to fuels. Natural Ni-Fe carbon monoxide dehydrogenase (NiFe-CODH) achieves reversible conversion of CO2 and CO at nearly thermodynamic equilibrium potential, which provides a template for developing CO2RR catalysts. However, compared with the natural enzyme, most biomimetic synthetic Ni-Fe complexes exhibit negligible CO2RR catalytic activities, which emphasizes the significance of effective bimetallic cooperation for CO2 activation. Enlightened by bimetallic synergy, we herein report a dinickel complex, NiIINiII(bphpp)(AcO)2 (where NiNi(bphpp) is derived from H2bphpp = 2,9-bis(5-tert-butyl-2-hydroxy-3-pyridylphenyl)-1,10-phenanthroline) for electrocatalytic reduction of CO2 to CO, which exhibits a remarkable reactivity approximately 5 times higher than that of the mononuclear Ni catalyst. Electrochemical and computational studies have revealed that the redox-active phenanthroline moiety effectively modulates the electron injection and transfer akin to the [Fe3S4] cluster in NiFe-CODH, and the secondary Ni site facilitates the C-O bond activation and cleavage through electron mediation and Lewis acid characteristics. Our work underscores the significant role of bimetallic cooperation in CO2 reduction catalysis and provides valuable guidance for the rational design of CO2RR catalysts.

Redox-Active Ligand Assisted Multielectron Catalysis: A Case of Electrocatalyzed CO2-to-CO Conversion

The selective reduction of carbon dioxide remains a significant challenge due to the complex multielectron/proton transfer process, which results in a high kinetic barrier and the production of diverse products. Inspired by the electrostatic and H-bonding interactions observed in the second sphere of the [NiFe]-CODH enzyme, researchers have extensively explored these interactions to regulate proton transfer, stabilize intermediates, and ultimately improve the performance of catalytic CO2 reduction. In this work, a series of cobalt(II) tetraphenylporphyrins with varying numbers of redox-active nitro groups were synthesized and evaluated as CO2 reduction electrocatalysts. Analyses of the redox properties of these complexes revealed a consistent relationship between the number of nitro groups and the corresponding accepted electron number of the ligand at -1.59 V vs. Fc+/0. Among the catalysts tested, TNPPCo with four nitro groups exhibited the most efficient catalytic activity with a turnover frequency of 4.9 × 104 s-1 and a catalytic onset potential 820 mV more positive than that of the parent TPPCo. Furthermore, the turnover frequencies of the catalysts increased with a higher number of nitro groups. These results demonstrate the promising design strategy of incorporating multielectron redox-active ligands into CO2 reduction catalysts to enhance catalytic performance.

Mapping the Ultrafast Mechanistic Pathways of Co Photocatalysts in Pure Water through Time-Resolved X-ray Spectroscopy

Nanosecond time-resolved X-ray (tr-XAS) and optical transient absorption spectroscopy (OTA) are applied to study 3 multimolecular photocatalytic systems with [Ru(bpy)3 ]2+ photoabsorber, ascorbic acid electron donor and Co catalysts with methylene (1), hydroxomethylene (2) and methyl (3) amine substituents in pure water. OTA and tr-XAS of 1 and 2 show that the favored catalytic pathway involves reductive quenching of the excited photosensitizer and electron transfer to the catalyst to form a CoII square pyramidal intermediate with a bonded aqua molecule followed by a CoI square planar derivative that decays within ≈8 μs. By contrast, a CoI square pyramidal intermediate with a longer decay lifetime of ≈35 μs is formed from an analogous CoII geometry for 3 in H2 O. These results highlight the protonation of CoI to form the elusive hydride species to be the rate limiting step and show that the catalytic rate can be enhanced through hydrogen containing pendant amines that act as H-H bond formation proton relays.

Molecularly dispersed nickel complexes on N-doped graphene for electrochemical CO2 reduction

In this work, new hybrid catalysts based on molecularly dispersed nickel complexes on N-doped graphene were developed for electrochemical CO2 reduction (ECR). Nickel(II) complexes (1-Ni, 2-Ni), and a new crystal structure ([2-Ni]Me), featuring N4-Schiff base macrocycles, were synthesized and investigated for their potential in ECR. Cyclic voltammetry (CV) in NBu4PF6/CH3CN solution demonstrated that the nickel complexes bearing N-H groups (1-Ni and 2-Ni) showed a substantial current enhancement in the presence of CO2, while the absence of N-H groups ([2-Ni]Me) resulted in an almost unchanged voltammogram. This indicated the necessity of the N-H functionality towards ECR in aprotic media. All three nickel complexes were successfully immobilized on nitrogen-doped graphene (NG) via non-covalent interactions. All three Ni@NG catalysts exhibited satisfactory CO2-to-CO reduction in aqueous NaHCO3 solution with the faradaic efficiency (FE) of 60-80% at the overpotential of 0.56 V vs. RHE. The ECR activity of [2-Ni]Me@NG also suggested that the N-H moiety from the ligand is less important in the heterogeneous aqueous system owing to viable hydrogen-bond formation and proton donors from water and bicarbonate ions. This finding could pave the way for understanding the effects of modifying the ligand framework at the N-H position toward fine tuning the reactivity of hybrid catalysts through molecular-level modulation.

Sulphur vs NH Group: Effects on the CO2 Electroreduction Capability of Phenylenediamine-Cp Cobalt Complexes

The cobalt complex (I) with cyclopentadienyl and 2-aminothiophenolate ligands was investigated as a homogeneous catalyst for electrochemical CO₂ reduction. By comparing its behavior with an analogous complex with the phenylenediamine (II), the effect of sulfur atom as a substituent has been evaluated. As a result, a positive shift of the reduction potential and the reversibility of the corresponding redox process have been observed, also suggesting a higher stability of the compound with sulfur. Under anhydrous conditions, complex I showed a higher current enhancement in the presence of CO₂ (9.41) in comparison with II (4.12). Moreover, the presence of only one -NH group in I explained the difference in the observed increases on the catalytic activity toward CO₂ due to the presence of water, with current enhancements of 22.73 and 24.40 for I and II, respectively. DFT calculations confirmed the effect of sulfur on the lowering of the energy of the frontier orbitals of I, highlighted by electrochemical measurements. Furthermore, the condensed Fukui function f ^- values agreed very well with the current enhancement observed in the absence of water.

Electrochemical organic reactions: A tutorial review

Although the core of electrochemistry involves simple oxidation and reduction reactions, it can be complicated in real electrochemical organic reactions. The principles used in electrochemical reactions have been derived using physical organic chemistry, which drives other organic/inorganic reactions. This review mainly comprises two themes: the first discusses the factors that help optimize an electrochemical reaction, including electrodes, supporting electrolytes, and electrochemical cell design, and the second outlines studies conducted in the field over a period of 10 years. Electrochemical reactions can be used as a versatile tool for synthetically important reactions by modifying the constant electrolysis current.

Electrocatalytic Reduction of Nitrogen Oxyanions with a Redox-Active Cobalt Macrocycle Complex

The cobalt complex, [Co(CR)Br₂]⁺, where CR is the redox-active macrocycle 2,12-dimethyl-3,7,11,17-tetraazabicyclo-[11.3.1]-heptadeca-1(17),2,11,13,15-pentaene, has been investigated for the electrocatalytic reduction of aqueous NO₂^- and NO₃^-. At neutral pH, the bromide ligands are hydrolyzed, providing [Co(CR)(OH₂)(OH)]²⁺ as the major species in aqueous solution. In the presence of nitrite, [Co(CR)(NO₂)₂]⁺ is formed as the major species in solution and is a precursor to the electrocatalytic reduction of NO₂^-, which is selectively converted to ammonium with high Faradaic efficiency. There is evidence for both homogeneous and heterogeneous electrocatalysis. Although similar NO₃^- binding is not observed, electrocatalytic reduction to ammonium also occurs, albeit with a lower Faradaic efficiency. In this case, NO₂^- is generated as an intermediate product of NO₃^- reduction.

Metal-ligand cooperative approaches in homogeneous catalysis using transition metal complex catalysts of redox noninnocent ligands

Catalysis offers a straightforward route to prepare various value-added molecules starting from readily available raw materials. The catalytic reactions mostly involve multi-electron transformations. Hence, compared to the inexpensive and readily available 3d-metals, the 4d and 5d-transition metals get an extra advantage for performing multi-electron catalytic reactions as the heavier transition metals prefer two-electron redox events. However, for sustainable development, these expensive and scarce heavy metal-based catalysts need to be replaced by inexpensive, environmentally benign, and economically affordable 3d-metal catalysts. In this regard, a metal-ligand cooperative approach involving transition metal complexes of redox noninnocent ligands offers an attractive alternative. The synergistic participation of redox-active ligands during electron transfer events allows multi-electron transformations using 3d-metal catalysts and allows interesting chemical transformations using 4d and 5d-metals as well. Herein we summarize an up-to-date literature report on the metal-ligand cooperative approaches using transition metal complexes of redox noninnocent ligands as catalysts for a few selected types of catalytic reactions.

Strategies for Breaking Molecular Scaling Relationships for the Electrochemical CO2 Reduction Reaction

The electrocatalytic CO2 reduction reaction (CO2RR) is a promising strategy for converting CO2 to fuels and value-added chemicals using renewable energy sources. Molecular electrocatalysts show promise for the selective conversion...

Electronic structure analysis of electrochemical CO2 reduction by iron-porphyrins reveals basic requirements to design catalysts bearing non-innocent ligands

Electrocatalytic CO2 reduction is a possible solution to the increasing CO2 concentration in the earth atmosphere, because it enables storage of energy while using the harmful CO2 feedstock as starting...

Controlling Radical-Type Single-Electron Elementary Steps in Catalysis with Redox-Active Ligands and Substrates

Advances in (spectroscopic) characterization of the unusual electronic structures of open-shell cobalt complexes bearing redox-active ligands, combined with detailed mapping of their reactivity, have uncovered several new catalytic radical-type protocols that make efficient use of the synergistic properties of redox-active ligands, redox-active substrates, and the metal to which they coordinate. In this perspective, we discuss the tools available to study, induce, and control catalytic radical-type reactions with redox-active ligands and/or substrates, contemplating recent developments in the field, including some noteworthy tools, methods, and reactions developed in our own group. The main topics covered are (i) tools to characterize redox-active ligands; (ii) novel synthetic applications of catalytic reactions that make use of redox-active carbene and nitrene substrates at open-shell cobalt-porphyrins; (iii) development of catalytic reactions that take advantage of purely ligand- and substrate-based redox processes, coupled to cobalt-centered spin-changing events in a synergistic manner; and (iv) utilization of redox-active ligands to influence the spin state of the metal. Redox-active ligands have emerged as useful tools to generate and control reactive metal-coordinated radicals, which give access to new synthetic methodologies and intricate (electronic) structures, some of which are yet to be exposed.

The Role of Redox Potential and Molecular Structure of Co(II)-Polypyridine Complexes on the Molecular Catalysis of CO2 Reduction

In this work, we report the electrochemical response of a family of Co(II) complexes, [CoII(L)3]2+ and [CoII(L’)2]2+ (L = 2,2’-bipyridine, 1,10-phenanthroline, 3,4,7,8-tetramethyl-1,10-phenanthroline, 5,6-dimethyl-1,10-phenanthroline, and 4,7-diphenyl-1,10-phenanthroline; L’ = terpyridine and 4-chloro-terpyridine), in the presence and absence of CO2 in order to understand the role of the redox potential and molecular structure on the molecular catalysis of CO2 reduction. The tris chelate complexes exhibited three electron transfer processes [CoII(L)3]2+ ⇄ [CoIII(L)3]3+ + 1e−, [CoΙΙ(L)3]2++1e− ⇄ [CoΙ(L)3]+, and [CoΙ(L)3]+ + 2e- ⇄ [CoΙ(L)(L−)2]−. In the case of complexes with 1,10-phen and 2,2-bipy, the third redox process showed a coupled chemical reaction [CoΙ(L)(L−)2]− → [CoΙ(L−)2]− + L. For bis chelate complexes, three electron transfer processes associated with the redox couples [CoΙΙ(L)2]/[CoIII(L)2]3+, [CoΙΙ(L)2]2+/[CoΙ(L)2]+, and [CoΙ(L)2]+/[CoΙ(L)(L−)] were registered, including a coupled chemical reaction only for the complex containing the ligand 4-chloro-terpyridine. Foot to the wave analysis (FOWA) obtained from cyclic voltammetry experiments allowed us to calculate the catalytic rate constant (k) for the molecular catalysis of CO2 reduction. The complex [Co(3,4,7,8-tm-1,10-phen)3]2+ presented a high k value; moreover, the complex [Co(4-Cl-terpy)3]2+ did not show catalytic activity, indicating that the more negative redox potential and the absence of the coupled chemical reaction increased the molecular catalysis. Density functional theory (DFT) calculations for compounds and CO2 were obtained to rationalize the effect of electronic structure on the catalytic rate constant (k) of CO2 reduction.

Transition Metal Complexes as Catalysts for the Electroconversion of CO2 : An Organometallic Perspective

The electrocatalytic transformation of carbon dioxide has been a topic of interest in the field of CO2 utilization for a long time. Recently, the area has seen increasing dynamics as an alternative strategy to catalytic hydrogenation for CO2 reduction. While many studies focus on the direct electron transfer to the CO2 molecule at the electrode material, molecular transition metal complexes in solution offer the possibility to act as catalysts for the electron transfer. C1 compounds such as carbon monoxide, formate, and methanol are often targeted as the main products, but more elaborate transformations are also possible within the coordination sphere of the metal center. This perspective article will cover selected examples to illustrate and categorize the currently favored mechanisms for the electrochemically induced transformation of CO2 promoted by homogeneous transition metal complexes. The insights will be corroborated with the concepts and elementary steps of organometallic catalysis to derive potential strategies to broaden the molecular diversity of possible products.

Structural tuning of heterogeneous molecular catalysts for electrochemical energy conversion

Heterogeneous molecular catalysts based on transition metal complexes have received increasing attention for their potential application in electrochemical energy conversion. The structural tuning of first and second coordination spheres of complexes provides versatile strategies for optimizing the activities of heterogeneous molecular catalysts and appropriate model systems for investigating the mechanism of structural variations on the activity. In this review, we first discuss the variation of first spheres by tuning ligated atoms; afterward, the structural tuning of second spheres by appending adjacent metal centers, pendant groups, electron withdrawing/donating, and conjugating moieties on the ligands is elaborated. Overall, these structural tuning resulted in different impacts on the geometric and electronic configurations of complexes, and the improved activity is achieved through tuning the stability of chemisorbed reactants and the redox behaviors of immobilized complexes.

Tuning the Reactivity of Cofacial Porphyrin Prisms for Oxygen Reduction Using Modular Building Blocks

We assembled eight cofacial porphyrin prisms using MTPyP (M = Co(II) or Zn(II), TPyP = 4-tetrapyridylporphyrin) and functionalized ruthenium-based "molecular clips" using coordination-driven self-assembly. Our approach allows for the rapid synthesis of these architectures in isolated yields as high as 98% for the assembly step. Structural and reactivity studies provided a deeper understanding of the role of the building blocks on the oxygen reduction reaction (ORR). Catalytic efficacy was probed by using cyclic and hydrodynamic voltammetry on heterogeneous catalyst inks in aqueous media. The reported prisms showed outstanding selectivity (>98%) for the kinetically hindered 4e^-/4H⁺ reduction of O₂ to H₂O over the kinetically more accessible 2e^-/2H⁺ reduction to H₂O₂. Furthermore, we have demonstrated significant cofacial enhancement in the observed catalytic rate constant k_s (∼5 orders of magnitude) over the mononuclear analogue. We conclude that the steric bulk of the clip plays an important role in the structural dynamics of these prisms, which in turn modulates the ORR reactivity with respect to selectivity and kinetics.

Curvature-induced electronic tuning of molecular catalysts for CO2 reduction

A curvature-induced electronic tuning strategy of molecular catalysts for CO₂ reduction is proposed.

Biochemical and artificial pathways for the reduction of carbon dioxide, nitrite and the competing proton reduction: effect of 2nd sphere interactions in catalysis

Reduction of oxides and oxoanions of carbon and nitrogen are of great contemporary importance as they are crucial for a sustainable environment.

Electrocatalytic Proton Reduction by a Cobalt(III) Hydride Complex with Phosphinopyridine PN Ligands

Cobalt complexes with 2-(diisopropylphosphinomethyl)pyridine (PN) ligands have been synthesized with the aim of demonstrating electrocatalytic proton reduction to dihydrogen with a well-defined hydride complex of an Earth-abundant metal. Reactions of simple cobalt precursors with 2-(diisopropylphosphino-methyl)pyridine (PN) yield [Co^II(PN)₂(MeCN)][BF₄]₂ 1, [Co^III(PN)₂(H)(MeCN)][PF₆]₂ 2, and [Co^III(PN)₂(H)(Cl)][PF₆] 3. Complexes 1 and 3 have been characterized crystallographically. Unusually for a bidentate PN ligand, all three exhibit geometries with mutually trans phosphorus and nitrogen ligands. Complex 1 exhibits a distorted square-pyramidal geometry with an axial MeCN ligand in a low-spin electronic state. In complexes 2 and 3, the PN ligands lie in a plane leaving the hydride trans to MeCN or chloride, respectively. The redox behavior of the three complexes has been studied by cyclic voltammetry at variable scan rates and by spectroelectrochemistry. A catalytic wave is observed in the presence of trifluoroacetic acid (TFA) at an applied potential close to the Co(II/I) couple of 1. Bulk electrolysis of 1, 2, or 3 at a potential of ca. -1.4 V vs E(Fc⁺/Fc) in the presence of TFA yields H₂ with Faradaic yields close to 100%. A catalytic mechanism is proposed in which the pyridine moiety of a PN ligand acts as a pendant proton donor following opening of the chelate ring. Additional mechanisms may also operate, especially in the presence of high acid concentration where speciation changes.

Nanostructured Cobalt-Based Electrocatalysts for CO2 Reduction: Recent Progress, Challenges, and Perspectives

CO₂ reduction reaction (CO₂ RR) provides a promising strategy for sustainable carbon fixation by converting CO₂ into value-added fuels and chemicals. In recent years, considerable efforts are focused on the development of transition-metal (TM)-based catalysts for the selectively electrochemical CO₂ reduction reaction (ECO₂ RR). Co-based catalysts emerge as one of the most promising electrocatalysts with high Faradaic efficiency, current density, and low overpotential, exhibiting excellent catalytic performance toward ECO₂ RR for CO and HCOOH productions that are economically viable. The intrinsic contribution of Co and the synergistic effects in Co-hybrid catalysts play essential roles for future commercial productions by ECO₂ RR. This review summarizes the rational design of Co-based catalysts for ECO₂ RR, including molecular, single-metal-site, and oxide-derived catalysts, along with the nanostructure engineering techniques to highlight the distribution of the ECO₂ RR products by Co-based catalysts. The density functional theory (DFT) simulations and advanced in situ characterizations contribute to interpreting the synergies between Co and other materials for the enhanced product selectivity and catalytic activity. Challenges and outlook concerning the catalyst design and reaction mechanism, including the upgrading of reaction systems of Co-based catalysts for ECO₂ RR, are also discussed.

Bioinspired Nickel Complexes Supported by an Iron Metalloligand

Nature utilizes multimetallic sites in metalloenzymes to enable multielectron chemical transformations at ambient conditions and low overpotentials. One such example of multimetallic cooperativity can be found in the C-cluster of Ni-carbon monoxide dehydrogenase (CODH), which interconverts CO and CO₂. Toward a potential functional model of the C-cluster, a family of Ni-Fe bimetallic complexes was synthesized that contain direct metal-metal bonding interactions. The complexes were characterized by X-ray crystallography, various spectroscopies (NMR, EPR, UV-vis, Mössbauer), and theoretical calculations. The Ni-Fe bimetallic system has a reversible Fe(III)/Fe(II) redox couple at -2.10 V (vs Fc⁺/Fc). The Fe-based "redox switch" can turn on CO₂ reactivity at the Ni(0) center by leveraging the Ni→Fe dative interaction to attenuate the Ni(0) electron density. The reduced Ni(0)Fe(II) species mediated the formal two-electron reduction of CO₂ to CO, providing a Ni-CO adduct and CO₃^2- as products. During the reaction, an intermediate was observed that is proposed to be a Ni-CO₂ species.

Electroreduction of CO2 to Formate with Low Overpotential using Cobalt Pyridine Thiolate Complexes

Electrocatalytic CO₂ reduction to value-added products provides a viable alternative to the use of carbon sources derived from fossil fuels. Carrying out these transformations at reasonable energetic costs, for example, with low overpotential, remains a challenge. Molecular catalysts allow fine control of activity and selectivity via tuning of their coordination sphere and ligand set. Herein we investigate a series of cobalt(III) pyridine-thiolate complexes as electrocatalysts for CO₂ reduction. The effect of the ligands and proton sources on activity was examined. We identified bipyridine bis(2-pyridinethiolato) cobalt(III) hexaflurophosphate as a highly selective catalyst for formate production operating at a low overpotential of 110 mV with a turnover frequency (TOF) of 10 s^-1 . Electrokinetic analysis coupled with density functional theory (DFT) computations established the mechanistic pathway, highlighting the role of metal hydride intermediates. The catalysts deactivate via the formation of stable cobalt carbonyl complexes, but the active species could be regenerated upon oxidation and release of coordinated CO ligands.

Molecular catalysis of CO2 reduction: recent advances and perspectives in electrochemical and light-driven processes with selected Fe, Ni and Co aza macrocyclic and polypyridine complexes

Earth-abundant Fe, Ni, and Co aza macrocyclic and polypyridine complexes have been thoroughly investigated for CO2 electrochemical and visible-light-driven reduction. Since the first reports in the 1970s, an enormous body of work has been accumulated regarding the two-electron two-proton reduction of the gas, along with mechanistic and spectroscopic efforts to rationalize the reactivity and establish guidelines for structure-reactivity relationships. The ability to fine tune the ligand structure and the almost unlimited possibilities of designing new complexes have led to highly selective and efficient catalysts. Recent efforts toward developing hybrid systems upon combining molecular catalysts with conductive or semi-conductive materials have converged to high catalytic performances in water solutions, to the inclusion of these catalysts into CO2 electrolyzers and photo-electrochemical devices, and to the discovery of catalytic pathways beyond two electrons. Combined with the continuous mechanistic efforts and new developments for in situ and in operando spectroscopic studies, molecular catalysis of CO2 reduction remains a highly creative approach.

Highly Active Manganese-Based CO2 Reduction Catalysts with Bulky NHC Ligands: A Mechanistic Study

Because of the strong σ-donor and weak π-acceptor of the N-heterocyclic carbene (NHC), Mn-NHC complexes were found to be active for the reduction of CO₂ to CO with high activity. However, some NHC-based manganese complexes showed low catalytic activity and required very negative potentials. We report herein that complex fac-[Mn^I(bis-^MesNHC)(CO)₃Br] [1; bis-^MesNHC = 3,3-bis(2,4,6-trimethylphenyl)-(1,1'-diimidazolin-2,2'-diylidene)methane] could catalyze the electrochemical reduction of CO₂ to CO with high activity (TOF_max = 3180 ± 6 s^-1) at a less negative potential. Due to the introduction of the bulky Mes groups, a one-electron-reduced intermediate {[Mn⁰(bis-^MesNHC)(CO)₃]⁰ (2^•)} was isolated as a packed "dimer" and crystallographically characterized. Stopped-flow Fourier-transform infrared spectroscopy was used to prove the direct reaction between doubly reduced intermediate fac-[Mn(bis-^MesNHC)(CO)₃]^- and CO₂; the tetracarbonyl Mn complex [Mn⁺(bis-^MesNHC)(CO)₄]⁺ ([2-CO]⁺) was captured, and its further reduction proposed as the rate-limiting step.

Electrochemically and Photochemically Induced Hydrogen Evolution Catalysis with Cobalt Tetraazamacrocycles Occurs Through Different Pathways

Cobalt complexes containing equatorial tetraazamacrocyclic ligands are active catalysts for the hydrogen evolution reaction in pure aqueous conditions. We investigated the effect of different groups directly linked to the macrocyclic ligand (-NH-, -NCH₃ -, or -N(CH₂ OH)-). In electrochemically induced hydrogen evolution catalysis at pH 4, the rate determining step is the protonation of the reduced Co^I species that gives a cobalt hydride (Co^III -H), a key intermediate towards the H-H bond formation. In sharp contrast, under photochemical conditions using [Ru(bpy)₃ ]²⁺ (bpy=2,2'-bipyridine) as a photosensitizer and ascorbate as sacrificial electron donor, the formation of a Co⁰ species that quickly protonates to give a Co^II -H is proposed. In this scenario, the rate determining step is the H-H bond formation that occurs in an intermolecular fashion from the Co^II -H species and a water molecule. Both mechanisms are supported by DFT calculations, which allowed us to estimate the pK_a values of the Co^III -H and Co^II -H species and transition states based on intramolecular and intermolecular H-H bond formation from Co^II -H.

Homogeneous Electrochemical Reduction of CO2 to CO by a Cobalt Pyridine Thiolate Complex

The chemical and electrochemical reduction of CO₂ to value added chemicals entails the development of efficient and selective catalysts. Synthesis, characterization and electrochemical CO₂ reduction activity of a air-stable cobalt(III) diphenylphosphenethano-bis(2-pyridinethiolate)chloride [{Co(dppe)(2-PyS)₂}Cl, 1-Cl] complex is divulged. The complex reduces CO₂ under homogeneous electrocatalytic conditions to produce CO with high Faradaic efficiency (FE > 92%) and selectivity in the presence of water. Through detailed electrochemical investigations, product analysis, and mechanistic investigations supported by theoretical calculations, it is established that complex 1-Cl reduces CO₂ in its Co(I) state. A reductive cleavage leads to a dangling protonated pyridine arm which enables facile CO₂ binding through a H-bond donation and facilitates the C-O bond cleavage via a directed protonation. A systematic benchmarking of this catalyst indicates that it has a modest overpotential (∼180 mV) and a TOF of ∼20 s^-1 for selective reduction of CO₂ to CO with H₂O as a proton source.

Two-Dimensional Metal-Organic Framework Nanosheets with Cobalt-Porphyrins for High-Performance CO2 Electroreduction

The electrochemical reduction of CO₂ presents a promising strategy to mitigate the greenhouse effect and reduce excess carbon dioxide emission to realize a carbon-neutral energy cycle, but it suffers from the lack of high-performance electrocatalysts. In this work, catalytic active cobalt porphyrin [TCPP(Co)=(5,10,15,20)-tetrakis(4-carboxyphenyl)porphyrin-Co^II ] was precisely anchored onto water-stable 2D metal-organic framework (MOF) nanosheets (Zr-BTB) to obtain ultrathin 2D MOF nanosheets [TCPP(Co)/Zr-BTB] with accessible catalytic sites for the CO₂ reduction reaction. Compared with molecular cobalt porphyrin, the TCPP(Co)/Zr-BTB exhibits an ultrahigh turnover frequency (TOF=4768 h^-1 at -0.919 V vs. reversible hydrogen electrode, RHE) owing to high active-site utilization. In addition, three post-modified 2D MOF nanosheets [TCPP(Co)/Zr-BTB-PABA, TCPP(Co)/Zr-BTB-PSBA, TCPP(Co)/Zr-BTB-PSABA] were obtained, with the modifiers of p-(aminomethyl)benzoic acid (PABA), p-sulfobenzoic acid potassium (PSBA), and p-sulfamidobenzoic acid (PSABA), to change the micro-environments around TCPP(Co) through the tuning of steric effects. Among them, the TCPP(Co)/Zr-BTB-PSABA exhibited the best performance with a faradaic efficiency (FE_CO ) of 85.1 %, TOF of 5315 h^-1 , and j_total of 6 mA cm^-2 at -0.769 V (vs. RHE). In addition, the long-term durability of the electrocatalysts is evaluated and the role of pH buffer is revealed.

Metalloradical intermediates in electrocatalytic reduction of CO2 to CO: Mn versus Re bis-N-heterocyclic carbene pincers

This work examines the relative reactivities of Re^I and Mn^I tricarbonyl pyridine-2,6-bis-N-heterocyclic carbene pincers M(CO)₃CNC^BnX (M = Re, Mn and X = Cl and Br) towards catalysis for the electrochemical conversion of CO₂ to CO. Unlike prior well-studied group VII catalysts, Mn(CO)₃CNC^BnX is extraordinarily active, while the new Re(CO)₃CNC^BnX complex surprisingly does not exhibit catalytic response. DFT calculations shed light on this puzzling behavior and show that the redox-active pyridine-2,6-bis-N-heterocyclic carbene ligand facilitates the reduction of the ground-state complexes; however, the extent of electronic delocalization in the reduced intermediates differs in the degree of metalloradical character. The highly-active Mn(CO)₃CNC^BnX complex proceeds through an intermediate with nucleophilic metalloradical character in which 66% of the unpaired electron spin resides on Mn. In contrast, Re(CO)₃CNC^BnX reduction proceeds through an intermediate with less metalloradical character in which only 38% of the unpaired spin is localized on Re with the remainder delocalized over the ligand. The energetic penalty of the electron delocalization of an electron on the ligand affects the M-CO bond strengths and related kinetic barriers. We discuss these observations in the context of turnover-enabling effects in CO₂ reductions mediated by group VII NHC pincer molecular electrocatalysts.

A Cobalt Schiff-Base Complex as a Putative Therapeutic for Azide Poisoning

There is presently no antidote available to treat azide poisoning. Here, the Schiff-base compound Co(II)-2,12-dimethyl-3,7,11,17-tetraazabicyclo-[11.3.1]heptadeca-1(17)2,11,13,15-pentaenyl dibromide (Co(II)N₄[11.3.1]) is investigated to determine if it has the capability to antagonize azide toxicity through a decorporation mechanism. The stopped-flow kinetics of azide binding to Co(II)N₄[11.3.1] in the absence of oxygen exhibited three experimentally observable phases: I (fast); II (intermediate); and III (slow). The intermediate phase II accounted for ∼70% of the overall absorbance changes, representing the major process observed, with second-order rate constants of 29 (±4) M^-1 s^-1 at 25 °C and 70 (±10) M^-1 s^-1 at 37 °C. The data demonstrated pH independence of the reaction around neutrality, suggesting the unprotonated azide anion to be the attacking species. The binding of azide to Co(II)N₄[11.3.1] appears to have a complicated mechanism leading to less than ideal antidotal capability; nonetheless, this cobalt complex does protect against azide intoxication. Administration of Co(II)N₄[11.3.1] at 5 min post sodium azide injection (ip) to mice resulted in a substantial decrease of righting-recovery times, 12 (±4) min, compared to controls, 40 (±8) min. In addition, only two out of seven mice "knocked down" when the antidote was administered compared to the controls given toxicant only (100% knockdown).

Transition metal-based catalysts for the electrochemical CO2 reduction: from atoms and molecules to nanostructured materials

An overview of the main strategies for the rational design of transition metal-based catalysts for the electrochemical conversion of CO₂, ranging from molecular systems to single-atom and nanostructured catalysts.

Molecular cobalt corrole complex for the heterogeneous electrocatalytic reduction of carbon dioxide

Electrochemical conversion of CO2 to alcohols is one of the most challenging methods of conversion and storage of electrical energy in the form of high-energy fuels. The challenge lies in the catalyst design to enable its real-life implementation. Herein, we demonstrate the synthesis and characterization of a cobalt(III) triphenylphosphine corrole complex, which contains three polyethylene glycol residues attached at the meso-phenyl groups. Electron-donation and therefore reduction of the cobalt from cobalt(III) to cobalt(I) is accompanied by removal of the axial ligand, thus resulting in a square-planar cobalt(I) complex. The cobalt(I) as an electron-rich supernucleophilic d8-configurated metal centre, where two electrons occupy and fill up the antibonding dz2 orbital. This orbital possesses high affinity towards electrophiles, allowing for such electronically configurated metals reactions with carbon dioxide. Herein, we report the potential dependent heterogeneous electroreduction of CO2 to ethanol or methanol of an immobilized cobalt A3-corrole catalyst system. In moderately acidic aqueous medium (pH = 6.0), the cobalt corrole modified carbon paper electrode exhibits a Faradaic Efficiency (FE%) of 48 % towards ethanol production.

Reaction Kinetics of Cyanide Binding to a Cobalt Schiff-Base Macrocycle Relevant to Its Mechanism of Antidotal Action

The Co(II/III)-containing macrocycle, cobalt 2,12-dimethyl-3,7,11,17-tetraazabicyclo-[11.3.1]-heptadeca-1(17)2,11,13,15-pentaenyl cation, or CoN₄[11.3.1], is a potential cyanide-scavenging agent. The rate of reduction of Co(III)N₄[11.3.1] by ascorbate is reasonably facile under pseudo-first-order conditions; a second-order rate constant of 11.7(±0.4) M^-1 s^-1 was determined at 25 °C and pH 7.4, along with the activation parameters for the reaction (ΔH^⧧ = 53.9(±0.8) kJ mol^-1; ΔS -79(±3) J mol^-1 K^-1). It follows that any cyanide-decorporating capability of the cobalt complex should depend more on the cyanide-binding characteristics of Co(II)N₄[11.3.1] than the oxidized form. The kinetics of the reaction of cyanide with Co(II)N₄[11.3.1] under anaerobic pseudo-first-order conditions is rapid and resulted in a linear dependence on the cyanide concentration, k_HCN = 8 × 10⁴ M^-1 s^-1, with a nonlinear intercept of 420 s^-1 at 10 °C, pH 7.6. The observed reaction rate increases significantly with increasing pH. A rate law is suggested, k_obs = k'[X] + (k_HCN + k_CNK_a/[H⁺])[HCN], where k_CN is estimated to be ∼2 × 10⁶ M^-1 s^-1. Activation parameters for the reaction with HCN (ΔH^⧧ = 10.7(±0.4) kJ mol^-1; ΔS^⧧ = -153(±1) J mol^-1 K^-1) suggest an associative mechanism. In the presence of excess oxygen, i.e., at higher levels than free oxygen in vivo, the reaction rate was too fast to be measured, and the final product was the oxidized complex, Co(III)N₄[11.3.1], where any cyanide ligands had been lost. This is much more rapid than the oxidation of the parent compound by oxygen, for which a second-order rate constant of 0.5(±0.02) M^-1 s^-1 at 25 °C was obtained. The study has gone some way toward enhancing our understanding of the reaction of Co(II)N₄[11.3.1] with cyanide. The fast reaction rate implies a high efficacy of the cyanide-scavenging capability of the complex and further supports the suggestion stemming from our previous work that Co(II)N₄[11.3.1] could prove to be a better and more cost-effective cyanide antidote than the FDA-approved hydroxocobalamin.