Carbon Dioxide Hydrosilylation Promoted by Cobalt Pincer Complexes

Four-electron reduction of CO2: from formaldehyde and acetal synthesis to complex transformations

The expansive and dynamic field of the CO2 Reduction Reaction (CO2RR) seeks to harness CO2 as a sustainable carbon source or energy carrier. While significant progress has been made in two, six, and eight-electron reductions of CO2, the four-electron reduction remains understudied. This review fills this gap, comprehensively exploring CO2 reduction into formaldehyde (HCHO) or acetal-type compounds (EOCH2OE, with E = [Si], [B], [Zr], [U], [Y], [Nb], [Ta] or -R) using various CO2RR systems. These encompass (photo)electro-, bio-, and thermal reduction processes with diverse reductants. Formaldehyde, a versatile C1 product, is challenging to synthesize and isolate from the CO2RR. The review also discusses acetal compounds, emphasizing their significance as pathways to formaldehyde with distinct reactivity. Providing an overview of the state of four-electron CO2 reduction, this review highlights achievements, challenges, and the potential of the produced compounds - formaldehyde and acetals - as sustainable sources for valuable product synthesis, including chiral compounds.

Unlocking the Metalation Applications of TMP-powered Fe and Co(II) bis(amides): Synthesis, Structure and Mechanistic Insights

Typified by LiTMP and TMPMgCl.LiCl, (TMP=2,2,6,6-tetramethylpiperidide), s-block metal amides have found widespread applications in arene deprotonative metalation. On the contrary, transition metal amides lack sufficient basicity to activate these substrates. Breaking new ground in this field, here we present the synthesis and full characterisation of earth-abundant transition metals M(TMP)2 (M=Fe, Co). Uncovering a new reactivity profile towards fluoroarenes, these amide complexes can promote direct M-H exchange processes regioselectively using one or two of their basic amide arms. Remarkably, even when using a perfluorinated substrate, selective C-H metalation occurs leaving C-F bonds intact. Their kinetic basicity can be boosted by LiCl or NBu4Cl additives which enables formation of kinetically activated ate species. Combining spectroscopic and structural studies with DFT calculations, mechanistic insights have been gained on how these low polarity metalation processes take place. M(TMP)2 can also be used to access ferrocene and cobaltocene by direct deprotonation of cyclopentadiene and undergo efficient CO2 insertion of both amide groups under mild reaction conditions.

Exploring the Effect of Pincer Rigidity on Oxidative Addition Reactions with Cobalt(I) Complexes

Cobalt complexes containing the 2,6-diaminopyridine-substituted PNP pincer (iPrPNMeNP = 2,6-(iPr2PNMe)2(C5H3N)) were synthesized. A combination of solid-state structures and investigation of the cobalt(I)/(II) redox potential established a relatively rigid and electron-donating chelating ligand as compared to iPrPNP (iPrPNP = 2,6-(iPr2PCH2)2(C5H3N)). Based on a buried volume analysis, the two pincer ligands are sterically indistinguishable. Nearly planar, diamagnetic, four-coordinate complexes were observed independent of the field strength (chloride, alkyl, aryl) of the fourth ligand completing the coordination sphere of the metal. Computational studies supported a higher barrier for C-H oxidative addition, largely a result of the increased rigidity of the pincer. The increased oxidative addition barrier resulted in stabilization of (iPrPNMeNP)Co(I) complexes, enabling the characterization of the cobalt boryl and the cobalt hydride dimer by X-ray crystallography. Moreover, (iPrPNMeNP)CoMe served as an efficient precatalyst for alkene hydroboration likely because of the reduced propensity to undergo oxidative addition, demonstrating that reactivity and catalytic performance can be tuned by rigidity of pincer ligands.

One-Pot Synthesis of Dihydropyrans via CO2 Reduction and Domino Knoevenagel/oxa-Diels-Alder Reactions

Catalytic CO₂ reduction with phenylsilane under solvent-free conditions was linked with the one-pot synthesis of 3,4-dihydropyrans from β-dicarbonyl compounds and styrenes. The synthesis includes three processes: (1) bis(silyl)acetal formation from CO₂ and phenylsilane and a domino reaction of (2) Knoevenagel condensation and (3) inverse-electron-demand oxa-Diels-Alder reaction. The first process was catalyzed by a pentanuclear Zn^II complex (0.07 mol %) to generate bis(silyl)acetals, which were hydrolyzed into formaldehyde to be used in the second step.

Large changes in hydricity as a function of charge and not metal in (PNP)M–H (de)hydrogenation catalysts that undergo metal–ligand cooperativity

Ligand pKa and metal hydricity scale with one another in (de)hydrogenation catalysts that undergo metal–ligand cooperativity, irrespective of metal or ligand identity. Anionic hydrides are significantly more hydridic than their neutral counterparts.

Silyl formates as hydrosilane surrogates for the transfer hydrosilylation of ketones

A transfer hydrosilylation of ketones employing silyl formates as hydrosilane surrogates under mild conditions is presented. A total of 24 examples of ketones have been successfully converted to their corresponding silyl ethers with 61-99% yields in the presence of a PN^HP-based ruthenium catalyst and silyl formate reagent. The crucial role of the ligand for the transformation is demonstrated.

Catalytic reduction of carbon dioxide by a zinc hydride compound, [Tptm]ZnH, and conversion to the methanol level

The zinc hydride compound, [Tptm]ZnH, may achieve the reduction of CO₂ by (RO)₃SiH (R = Me, Et) to the methanol oxidation level, (MeO)_xSi(OR)_4-x, via the formate species, HCO₂Si(OR)₃. However, because insertion of CO₂ into the Zn-H bond is more facile than insertion of HCO₂Si(OR)₃, conversion of HCO₂Si(OR)₃ to the methanol level only occurs to a significant extent in the absence of CO₂.

Hydroboration of CO2 to Methyl Boronate Catalyzed by a Manganese Pincer Complex: Insights into the Reaction Mechanism and Ligand Effect

The conversion of carbon dioxide to fuels, polymers, and chemicals is an attractive strategy for the synthesis of high-value-added products and energy-storage materials. Herein, the density functional theory method was employed to investigate the reaction mechanism of CO₂ hydroboration catalyzed by manganese pincer complex, [Mn(Ph₂PCH₂SiMe₂)₂NH(CO)₂Br]. The carbonyl association and carbonyl dissociation mechanisms were investigated, and the calculated results showed that the carbonyl association mechanism is more favorable with an energetic span of 27.0 kcal/mol. Meanwhile, the solvent effect of the reaction was explored, indicating that the solvents could reduce the catalytic activity of the catalyst, which was consistent with the experimental results. In addition, the X ligand effect (X = CO, Br, H, PH₃) on the catalytic activity of the manganese complex was explored, indicating that the anionic complexes [Mn^I - Br]^- and [Mn^I - H]^- have higher catalytic activity. This may not only shed light on the fixation and conversion of CO₂ catalyzed by earth-abundant transition-metal complexes but also provide theoretical insights to design new transition-metal catalysts.

Homogeneous Catalysis for Sustainable Energy: Hydrogen and Methanol Economies, Fuels from Biomass, and Related Topics

As the world pledges to significantly cut carbon emissions, the demand for sustainable and clean energy has now become more important than ever. This includes both production and storage of energy carriers, a majority of which involve catalytic reactions. This article reviews recent developments of homogeneous catalysts in emerging applications of sustainable energy. The most important focus has been on hydrogen storage as several efficient homogeneous catalysts have been reported recently for (de)hydrogenative transformations promising to the hydrogen economy. Another direction that has been extensively covered in this review is that of the methanol economy. Homogeneous catalysts investigated for the production of methanol from CO2, CO, and HCOOH have been discussed in detail. Moreover, catalytic processes for the production of conventional fuels (higher alkanes such as diesel, wax) from biomass or lower alkanes have also been discussed. A section has also been dedicated to the production of ethylene glycol from CO and H2 using homogeneous catalysts. Well-defined transition metal complexes, in particular, pincer complexes, have been discussed in more detail due to their high activity and well-studied mechanisms.

Cobalt-Catalyzed Dehydrogenative C-H Silylation of Alkynylsilanes

Herein, we report that a cobalt catalyst permits the general synthesis of substituted alkynylsilanes through dehydrogenative coupling of alkynylsilanes and hydrosilanes. Several silylated alkynes, including di- and trisubstituted ones, were prepared in a one-step procedure. Thirty-seven compounds were synthesized for the first time by applying our catalyst system. The alkynylsilanes bearing hydrosilyl moieties provide an opportunity for further functionalization (e. g., hydrosilylation). The use of primary silanes as substrates and precatalyst activators permits the use of inexpensive and easily accessible 3d metal precatalysts, and avoids the presence of additional activators.

Cobalt-Catalyzed Hydrosilylation of Carbon Dioxide to the Formic Acid, Formaldehyde, and Methanol Level-How to Control the Catalytic Network?

The selective hydrosilylation of carbon dioxide (CO₂) to either the formic acid, formaldehyde, or methanol level using a molecular cobalt(II) triazine complex can be controlled based on reaction parameters such as temperature, CO₂ pressure, and concentration. Here, we rationalize the catalytic mechanism that enables the selective arrival at each product platform. Key reactive intermediates were prepared and spectroscopically characterized, while the catalytic mechanism and the energy profile were analyzed with density functional theory (DFT) methods and microkinetic modeling. It transpired that the stepwise reduction of CO₂ involves three consecutive catalytic cycles, including the same cobalt(I) triazine hydride complex as the active species. The increasing kinetic barriers associated with each reduction step and the competing hydride transfer steps in the three cycles corroborate the strong influence of the catalyst environment on the product selectivity. The fundamental mechanistic insights provide a consistent description of the catalytic system and rationalize, in particular, the experimentally verified opportunity to steer the reaction toward the formaldehyde product as the chemically most challenging reduction level.

Partnering a Three-Coordinate Gallium Cation with a Hydroborate Counter-Ion for the Catalytic Hydrosilylation of CO2

A novel β-diketiminate stabilized gallium hydride, (^Dipp L)Ga(Ad)H (where (^Dipp L)={HC(MeCDippN)₂ }, Dipp=2,6-diisopropylphenyl and Ad=1-adamantyl), has been synthesized and shown to undergo insertion of carbon dioxide into the Ga-H bond under mild conditions. In this case, treatment of the resulting κ¹ -formate complex with triethylsilane does not lead to regeneration of the hydride precursor. However, when combined with B(C₆ F₅ )₃ , (^Dipp L)Ga(Ad)H catalyses the reductive hydrosilylation of CO₂ . Under stoichiometric conditions, the addition of one equivalent of B(C₆ F₅ )₃ to (^Dipp L)Ga(Ad)H leads to the formation of a 3-coordinate cationic gallane complex, partnered with a hydroborate anion, [(^Dipp L)Ga(Ad)][HB(C₆ F₅ )₃ ]. This complex rapidly hydrometallates carbon dioxide and catalyses the selective reduction of CO₂ to the formaldehyde oxidation level at 60 °C in the presence of Et₃ SiH (yielding H₂ C(OSiEt₃ )₂ ). When catalysis is undertaken in the presence of excess B(C₆ F₅ )₃ , appreciable enhancement of activity is observed, with a corresponding reduction in selectivity: the product distribution includes H₂ C(OSiEt₃ )₂ , CH₄ and O(SiEt₃ )₂ . While this system represents proof-of-concept in CO₂ hydrosilylation by a gallium hydride system, the TOF values obtained are relatively modest (max. 10 h^-1 ). This is attributed to the strength of binding of the formatoborate anion to the gallium centre in the catalytic intermediate (^Dipp L)Ga(Ad){OC(H)OB(C₆ F₅ )₃ }, and the correspondingly slow rate of the turnover-limiting hydrosilylation step. In turn, this strength of binding can be related to the relatively high Lewis acidity measured for the [(^Dipp L)Ga(Ad)]⁺ cation (AN=69.8).

Molecular Zinc Hydride Cations [ZnH]+ : Synthesis, Structure, and CO2 Hydrosilylation Catalysis

Protonolysis of [ZnH2 ]n with the conjugated Brønsted acid of the bidentate diamine TMEDA (N,N,N',N'-tetramethylethane-1,2-diamine) and TEEDA (N,N,N',N'-tetraethylethane-1,2-diamine) gave the zinc hydride cation [(L2 )ZnH]+ , isolable either as the mononuclear THF adduct [(L2 )ZnH(thf)]+ [BArF 4 ]- (L2 =TMEDA; BArF 4 - =[B(3,5-(CF3 )2 -C6 H3 )4 ]- ) or as the dimer [{(L2 )Zn)}2 (μ-H)2 ]2+ [BArF 4 ]- 2 (L2 =TEEDA). In contrast to [ZnH2 ]n , the cationic zinc hydrides are thermally stable and soluble in THF. [(L2 )ZnH]+ was also shown to form di- and trinuclear adducts of the elusive neutral [(L2 )ZnH2 ]. All hydride-containing cations readily inserted CO2 to give the corresponding formate complexes. [(TMEDA)ZnH]+ [BArF 4 ]- catalyzed the hydrosilylation of CO2 with tertiary hydrosilanes to give stepwise formoxy silane, methyl formate, and methoxy silane. The unexpected formation of methyl formate was shown to result from the zinc-catalyzed transesterification of methoxy silane with formoxy silane, which was eventually converted into methoxy silane as well.

Co(I) complexes with a tetradentate phenanthroline-based PNNP ligand as a potent new metal-ligand cooperation platform

A series of low spin cobalt(i) complexes bearing a tetradentate phenanthroline-based PNNP ligand (2,9-bis((diphenylphosphanyl)methyl)-1,10-phenanthroline), [CoCl(PNNP)] (1), [CoMe(PNNP)] (2) and [Co(CH2SiMe3)(PNNP)] (3), were synthesized and structurally identified. Complex 3 underwent a structural rearrangement of the PNNP skeleton upon heating to form [Co(PNNP')] (4), which is supported by an asymmetrical PNNP' ligand with a dearomatized phenanthroline backbone. Mechanistic studies supported that the transformation from 3 to 4 was initiated by the homolysis of either a Co-CH2SiMe3 bond or a benzylic C-H bond. Complex 4 achieved H-H bond cleavage of H2 (1 atm) at ambient temperature, to form [Co(PNNP'')] (6), in which two H atoms were incorporated into the endocyclic double bond of the PNNP'' ligand backbone.

Controlling the Product Platform of Carbon Dioxide Reduction: Adaptive Catalytic Hydrosilylation of CO2 Using a Molecular Cobalt(II) Triazine Complex

The catalytic reduction of carbon dioxide (CO2 ) is considered a major pillar of future sustainable energy systems and chemical industries based on renewable energy and raw materials. Typically, catalysts and catalytic systems are transforming CO2 preferentially or even exclusively to one of the possible reduction levels and are then optimized for this specific product. Here, we report a cobalt-based catalytic system that enables the adaptive and highly selective transformation of carbon dioxide individually to either the formic acid, the formaldehyde, or the methanol level, demonstrating the possibility of molecular control over the desired product platform.

Recent Progress with Pincer Transition Metal Catalysts for Sustainability

Our planet urgently needs sustainable solutions to alleviate the anthropogenic global warming and climate change. Homogeneous catalysis has the potential to play a fundamental role in this process, providing novel, efficient, and at the same time eco-friendly routes for both chemicals and energy production. In particular, pincer-type ligation shows promising properties in terms of long-term stability and selectivity, as well as allowing for mild reaction conditions and low catalyst loading. Indeed, pincer complexes have been applied to a plethora of sustainable chemical processes, such as hydrogen release, CO2 capture and conversion, N2 fixation, and biomass valorization for the synthesis of high-value chemicals and fuels. In this work, we show the main advances of the last five years in the use of pincer transition metal complexes in key catalytic processes aiming for a more sustainable chemical and energy production.

Catalytic hydrogenation of CO2 at a structurally rigidified cobalt center

Catalytic hydrogenation of CO₂ occurs at a cobalt center supported by a rigidified PNP ligand revealing higher catalytic performance.

Diverse Catalytic Systems and Mechanistic Pathways for Hydrosilylative Reduction of CO2

Catalytic hydrosilylation of carbon dioxide has emerged as a promising approach for carbon dioxide utilization. It allows the reductive transformation of carbon dioxide into value-added products at the levels of formate, formaldehyde, methanol, and methane. Tremendous progress has been made in the area of carbon dioxide hydrosilylation since the first reports in 1981. This focus review describes recent advances in the design and catalytic performance of leading catalyst systems, including transition-metal, main-group, and transition-metal/main-group and main-group/main-group tandem catalysts. Emphasis is placed on discussions of key mechanistic features of these systems and efforts towards the development of more selective, efficient, and sustainable carbon dioxide hydrosilylation processes.

Additive-Free Isomerization of Allylic Alcohols to Ketones with a Cobalt PNP Pincer Catalyst

Catalytic isomerization of allylic alcohols in ethanol as a green solvent was achieved by using air and moisture stable cobalt (II) complexes in the absence of any additives. Under mild conditions, the cobalt PNP pincer complex substituted with phenyl groups on the phosphorus atoms appeared to be the most active. High rates were obtained at 120 °C, even though the addition of one equivalent of base increases the speed of the reaction drastically. Although some evidence was obtained supporting a dehydrogenation-hydrogenation mechanism, it was proven that this is not the major mechanism. Instead, the cobalt hydride complex formed by dehydrogenation of ethanol is capable of double-bond isomerization through alkene insertion-elimination.

Enabling Two-Electron Pathways with Iron and Cobalt: From Ligand Design to Catalytic Applications

Homogeneous catalysis with Earth-abundant, first-row transition metals, including iron and cobalt, has gained considerable recent attention as a potentially cost-effective and sustainable alternative to more commonly and historically used precious metals. Because fundamental organometallic transformations, such as oxidative addition and reductive elimination, are two-electron processes and essential steps in many important catalytic cycles, controlling redox chemistry-in particular overcoming one-electron chemistry-has been as a central challenge with Earth-abundant metals. This Perspective focuses on approaches to impart sufficiently strong ligand fields to generate electron-rich metal complexes able to promote oxidative addition reactions where the redox changes are exclusively metal-based. Emphasis is placed on how ligand design and exploration of fundamental organometallic chemistry coupled with mechanistic understanding have been used to discover iron catalysts for the hydrogen isotope exchange in pharmaceuticals and cobalt catalysts for C(sp²)-H borylation reactions. A pervasive theme is that first-row metal complexes often promote unique chemistry from their precious-metal counterparts, demonstrating that these elements offer a host of new opportunities for reaction discovery and for more sustainable catalysis.

Oxidative Addition of Dihydrogen, Boron Compounds, and Aryl Halides to a Cobalt(I) Cation Supported by a Strong-Field Pincer Ligand

Cationic cobalt(I) dinitrogen complexes with a strong-field tridentate pincer ligand were prepared and the oxidative addition of polar and non-polar bonds was studied. Addition of H₂ to [(^iPrPNP)Co(N₂)]⁺ (^iPrPNP = 2,6-bis((diisopropylphosphaneyl)methyl)pyridine) in THF-d8 resulted in rapid oxidative addition and formation of the cis-Co(III) dihydride complex, cis-[(^iPrPNP)Co(H)₂L]⁺ where L = THF or N₂. The addition of H₂ was reversible as evidenced by the dynamics observed by variable temperature ¹H NMR spectroscopy and the regeneration of [(^iPrPNP)Co(N₂)]⁺ upon exposure to dinitrogen. In contrast, addition of HBPin, (Pin = pinacolato) B₂Pin₂ and aryl halides resulted in the formation of net one-electron oxidation products: cationic Co(II)-boryl and Co(II)-halide/aryl complexes, respectively. All products were structurally characterized by X-ray crystallography and the electronic structures were determined by a combination of magnetic moment measurements, EPR spectroscopy and DFT calculations. Monitoring the addition of HBPin to [(^iPrPNP)Co(N₂)]⁺ provided evidence for a transient Co(III) oxidative addition product that likely undergoes comproportionation with the cobalt(I) starting material to generate the observed Co(II) products.

Cobalt(II) and (I) Complexes of Diphosphine-Ketone Ligands: Catalytic Activity in Hydrosilylation Reactions

The hydrosilylation of unsaturated compounds homogeneously catalyzed by cobalt complexes has gained considerable attention in the last years, aiming at substituting precious metal-based catalysts. In this study, the catalytic activity of well-characterized CoII and CoI complexes of the pToldpbp ligand is demonstrated in the hydrosilylation of 1-octene with phenylsilane. The CoI complex is the better precatalyst for the mentioned reaction under mild conditions, at 1 mol-% catalyst, 1 h, room temperature, and without solvent, yielding 84 % of octylphenylsilane. Investigation of the substrate scope shows lower performance of the catalyst in styrene hydrosilylation, but excellent results with allylbenzene (84 %) and acetophenone (> 99 %). This catalytic study contributes to the field of cobalt-catalyzed hydrosilylation reactions and shows the first example of catalysis employing the dpbp ligand in combination with a base metal.

Ir-catalyzed selective reduction of CO2 to the methoxy or formate level with HSiMe(OSiMe3)2

Ir-NSi-based catalysts allow controlling the selective reduction of CO₂ with HSiMe(OSiMe₃)₂ to afford methoxysilane or silyl formate.

Cobalt-Pincer Complexes in Catalysis

Non-noble metal catalysts based on pincer type compounds are of special interest for organometallic chemistry and organic synthesis. Next to iron and manganese, currently cobalt-pincer type complexes are successfully applied in various catalytic reactions. In this review the recent progress in (de)hydrogenation, transfer hydrogenation, hydroboration and hydrosilylation as well as dehydrogenative coupling reactions using cobalt-pincer complexes is summarised.

Efficient Conversion of Carbon Dioxide with Si-Based Reducing Agents Catalyzed by Metal Complexes and Salts

Homogeneous metal complex and salt catalysts were developed for the reductive transformation of CO₂ with Si-based reducing agents. Cu-bisphosphine complexes were found to be excellent catalysts for the hydrosilylation of CO₂ with polymethylhydrosiloxane (PMHS). The Cu complexes also showed high catalytic activity and a wide substrate scope for formamide synthesis from amines, CO₂ , and PMHS. Simple fluoride salts such as tetrabutylammonium fluoride acted as good catalysts for the reductive conversion of CO₂ to formic acid in the presence of hydrosilane, disilane, and metallic Si. Based on the kinetics, isotopic experiments, and in-situ NMR measurements, the reaction mechanism for both catalyst systems, the Cu complex and the fluoride salt, have been proposed.

Cobalt catalysed reduction of CO2via hydroboration

We report an operationally convenient reduction of CO2 to methanol via cobalt catalysed hydroboration which occurs under mild reaction conditions. Addition of NaHBEt3 to Co(acac)3 generates an active hydroboration catalyst, which is proposed to be a "Co-H" species on the basis of infrared spectroscopy. The reduction of CO2 in the presence of various boranes showed that BH3·SMe2 afforded near quantitative conversion (98% NMR yield) to methanol upon hydrolysis.

Insight into catalytic reduction of CO2 to methane with silanes using Brookhart's cationic Ir(iii) pincer complex

Using density functional theory computations, we investigated in detail the underlying reaction mechanism and crucial intermediates present during the reduction of carbon dioxide to methane with silanes, catalyzed by the cationic Ir-pincer complex ((POCOP)Ir(H)(acetone)+, POCOP = 2,6-bis(dibutylphosphinito)phenyl). Our study postulates a plausible catalytic cycle, which involves four stages, by sequentially transferring silane hydrogen to the CO2 molecule to give silylformate, bis(silyl)acetal, methoxysilane and the final product, methane. The first stage of reducing carbon dioxide to silylformate is the rate-determining step in the overall conversion, which occurs via the direct dissociation of the silane Si-H bond to the C[double bond, length as m-dash]O bond of a weakly coordinated Ir-CO2 moiety, with a free energy barrier of 29.5 kcal mol-1. The ionic SN2 outer-sphere pathway in which the CO2 molecule nucleophilically attacks at the η1-silane iridium complex to cleave the η1-Si-H bond, followed by the hydride transferring from iridium dihydride [(POCOP)IrH2] to the cation [O[double bond, length as m-dash]C-OSiMe3]+, is a slightly less favorable pathway, with a free energy barrier of 33.0 kcal mol-1 in solvent. The subsequent three reducing steps follow similar pathways: the ionic SN2 outer-sphere process with silylformate, bis(silyl)acetal and methoxysilane substrates nucleophilically attacking the η1-silane iridium complex to give the ion pairs [(POCOP)IrH2] [HC(OSiMe3)2]+, [(POCOP)IrH2] [CH2(OSiMe3)2(SiMe3)]+, and [(POCOP)IrH2] [CH3O(SiMe3)2]+, respectively, followed by the hydride transfer process. The rate-limiting steps of the three reducing stages are calculated to possess free energy barriers of 12.2, 16.4 and 22.9 kcal mol-1, respectively. Furthermore, our study indicates that the natural iridium dihydride [(POCOP)IrH2] generated along the ionic SN2 outer-sphere pathway could greatly facilitate the silylation of CO2, with a potential energy barrier calculated at a low value of 16.7 kcal mol-1.