The Thermal Degradation Process of Tetrabromobisphenol A

Genome-Centric Metatranscriptomic Characterization of a Humin-Facilitated Anaerobic Tetrabromobisphenol A-Dehalogenating Consortium

Tetrabromobisphenol A (TBBPA), a widely used brominated flame retardant in electronics manufacturing, has caused global contamination due to improper e-waste disposal. Its persistence, bioaccumulation, and potential carcinogenicity drive studies of its transformation and underlying (a)biotic interactions. This study achieved an anaerobic enrichment culture capable of reductively dehalogenating TBBPA to the more bioavailable bisphenol A. 16S rRNA gene amplicon sequencing and quantitative PCR confirmed that successive dehalogenation of four bromide ions from TBBPA was coupled with the growth of both Dehalobacter sp. and Dehalococcoides sp. with growth yields of 5.0 ± 0.4 × 108 and 8.6 ± 4.6 × 108 cells per μmol Br- released (N = 3), respectively. TBBPA dehalogenation was facilitated by solid humin and reduced humin, which possessed the highest organic radical signal intensity and reducing groups -NH2, and maintained the highest dehalogenation rate and dehalogenator copies. Genome-centric metatranscriptomic analyses revealed upregulated putative TBBPA-dehalogenating rdhA (reductive dehalogenase) genes with humin amendment, cprA-like Dhb_rdhA1 gene in Dehalobacter species, and Dhc_rdhA1/Dhc_rdhA2 genes in Dehalococcoides species. The upregulated genes of lactate fermentation, de novo corrinoid biosynthesis, and extracellular electron transport in the humin amended treatment also stimulated TBBPA dehalogenation. This study provided a comprehensive understanding of humin-facilitated organohalide respiration.

Enhanced bromine fixation and tar lightweighting in co-pyrolysis of non-metallic fractions of waste printed circuit boards with Bayer red mud

A co-pyrolysis process for non-metallic fractions (NMFs) from WPCBs with Bayer red mud (RM) is proposed to upgrade pyrolysis products in this study. High bromine fixation efficiency was realized, and higher content of lightweight pyrolysis tar was obtained. The mechanism of catalytic pyrolysis and simultaneous bromine fixation of NMFs by RM was investigated by experiments and theoretical calculations. The three inorganic components of Fe₂O₃, CaCO₃ and Al₂O₃ in RM played key roles in the catalytic pyrolysis of NMFs, and their order of catalytic debromination effect was CaCO₃ > Fe₂O₃ > Al₂O₃. By adding 15 wt% RM, the pyrolysis solid residue could fix 89.55 wt% bromine, compared with 35.42 wt% of NMFs without adding RM, due to the formation of FeBr₂ and CaBr₂ from Fe₂O₃ and CaCO₃ in RM, respectively. Tar lightweighting was realized by reducing the energy barrier of the direct decomposition of tetrabromobisphenol A (TBBPA) in NMFs. The order of effect of the three key components on the tar lightweighting was Fe₂O₃ > Al₂O₃ > CaCO₃. The content of lightweight tar in the tar obtained by catalytic pyrolysis of NMFs with 15 wt% RM was 44.29% higher than that in the tar obtained by direct pyrolysis of NMFs. This work provides a theoretical guidance for the low-cost and eco-friendly recycling of e-wastes by co-pyrolysis with RM.

Investigation on the formation mechanism of main products from TBBPA pyrolysis using DFT method

The formation mechanisms of the main pyrolysis products of tetrabromobisphenol A (TBBPA) such as hydrogen bromide (HBr), bisphenol A compounds, and phenolic compounds were studied through using density functional theory (DFT) method at the theoretical level of B3P86/6-311 + G (d,p), and the effects of H and Br radicals on the formation mechanism of each product were analyzed. For the formation of each pyrolysis product, this paper presented various possible reaction pathways and acquired their thermodynamic parameters. Calculation results show that HBr can be produce. d continuously during the pyrolysis of TBBPA, and combination and abstraction reactions are the main ways for the generation of HBr. Br radical can abstract H atom from the phenolic hydroxyl groups of TBBPA to produce HBr, and this reaction is barrierless. When H radicals are involved in the initial reaction, the significance of the keto-enol tautomerism is negligible at all debrominations. The Br atom abstraction by H radical is the optimal pattern for debromination. TBBPA can be transformed into low-brominated bisphenol A through consecutive hydrodebromination reactions with trivial activation energies of 8.7-9.5 kJ/mol. The demethylation reaction is an initiation reaction for monomolecular pyrolysis of TBBPA and low-brominated bisphenol A, which is beneficial to the formation of phenolic compounds. During the pyrolysis of TBBPA, para-position Br atom of polybrominated phenol is easier to be removed and the energy barriers of rate-determining steps of the optimal reaction paths for the formation of 2,4,6-tribromophenol, 2,6-dibromophenol, 2,4-dibromophenol, 2-bromophenol, 4-bromophenol and phenol are 108.8, 7.6, 8.7, 8.1, 9.5, and 8.7 kJ/mol, respectively.

Degradation of tetrabromobisphenol A (TBBA) with calcium hydroxide: a thermo-kinetic analysis

Thermal treatment of bromine-contaminated polymers (i.e., as in e-waste) with metal oxides is currently deployed as a mainstream strategy in recycling and resources recovery from these objects. The underlying aim is to capture the bromine content and to produce pure bromine-free hydrocarbons. Bromine originates from the added brominated flame retardants (BFRs) to the polymeric fractions in printed circuits boards, where tetrabromobisphenol A (TBBA) is the most utilized BFR. Among notable deployed metal oxides is calcium hydroxide, i.e., Ca(OH)₂ that often displays high debromination capacity. Comprehending thermo-kinetic parameters that account for the BFRs:Ca(OH)₂ interaction is instrumental to optimize the operation at an industrial scale. Herein, we report comprehensive kinetics and thermodynamics studies into the pyrolytic and oxidative decomposition of a TBBA:Ca(OH)₂ mixture at four different heating rates, 5, 10, 15, and 20 °C min^-1, carried out using a thermogravimetric analyser. Fourier Transform Infrared Spectroscopy (FTIR) and a carbon, hydrogen, nitrogen, and sulphur (CHNS) elemental analyser established the vibrations of the molecules and carbon content of the sample. From the thermogravimetric analyser (TGA) data, the kinetic and thermodynamic parameters were evaluated using iso-conversional methods (KAS, FWO, and Starink), which were further validated by the Coats-Redfern method. The computed activation energies for the pyrolytic decomposition of pure TBBA and its mixture with Ca(OH)₂ reside in the narrow ranges of 111.7-112.1 kJ mol^-1 and 62.8-63.4 kJ mol^-1, respectively (considering the various models). Obtained negative ΔS values suggest the formation of stable products. The synergic effects of the blend exhibited positive values in the low-temperature ranges (200-300 °C) due to the emission of HBr from TBBA and the solid-liquid bromination process occurring between TBBA and Ca(OH)₂. From a practical point of view, data provided herein are useful in efforts that aim to fine-tune operational conditions encountered in real recycling scenarios, i.e., in co-pyrolysis of e-waste with Ca(OH)₂ in rotary kilns.

Framework of the Integrated Approach to Formation Mechanisms of Typical Combustion Byproducts─Polyhalogenated Dibenzo-p-dioxins/Dibenzofurans (PXDD/Fs)

Understanding the mechanisms through which persistent organic pollutants (POPs) form during combustion processes is critical for controlling emissions of POPs, but the mechanisms through which most POPs form are poorly understood. Polyhalogenated dibenzo-p-dioxins and dibenzofurans (PXDD/Fs) are typical toxic POPs, and the formation mechanisms of PXDD/Fs are better understood than the mechanisms through which other POPs form. In this study, a framework for identifying detailed PXDD/Fs formation mechanisms was developed and reviewed. The latest laboratory studies in which organic free radical intermediates of PXDD/Fs have been detected in situ and isotope labeling methods have been used to trace transformation pathways were reviewed. These studies provided direct evidence for PXDD/Fs formation pathways. Quantum chemical calculations were performed to determine the rationality of proposed PXDD/Fs formation pathways involving different elementary reactions. Many field studies have been performed, and the PXDD/Fs congener patterns found were compared with PXDD/Fs congener patterns obtained in laboratory simulation studies and theoretical studies to mutually verify the dominant PXDD/Fs formation mechanisms. The integrated method involving laboratory simulation studies, theoretical calculations, and field studies described and reviewed here can be used to clarify the mechanisms involved in PXDD/Fs formation. This review brings together information about PXDD/Fs formation mechanisms and provides a methodological framework for investigating PXDD/Fs and other POPs formation mechanisms during combustion processes, which will help in the development of strategies for controlling POPs emissions.

Mixed bromine/chlorine transformation products of tetrabromobisphenol A formed in the combustion of printed circuit boards: Emission characteristics and transformation pathways

Recently, mixed bromine/chlorine transformation products of tetrabromobisphenol A (Cl_yBr_xBPAs) were found to be possibly related to the thermal treatment processes of electronic wastes. To explore their emission characteristics and formation mechanism, printed circuit board scraps were combusted in a tube furnace, under the temperature from 25 °C to 600 °C. The emission factor of the debromination products of tetrabromobisphenol A (Br_xBPAs) was the highest, whereas that of Cl_yBr_xBPAs was the lowest. Among three phases, most of the target compounds were partitioned into the oil and particle phases, and only negligible gaseous 2-BrBPA and bisphenol A were detected. The emission rates of most compounds were fastest at 300 °C, although 2-BrBPA, 2,6-Br₂BPA, and 2-Cl-6-BrBPA peaked at 350 °C. Among the chemicals in total emission, 2-BrBPA was the dominant congener in Br_xBPAs, whereas 2-Cl-2',6,6'-Br₃BPA, 2-Cl-2',6^#-Br₂BPA, and Σ₂Cl₁Br₁BPAs shared similar proportions in Cl_yBr_xBPAs. Meanwhile, the composition profiles at 300 °C showed that 2,2',6-Br₃BPA and 2-Cl-2',6,6'-Br₃BPA occupied the largest proportions in Br_xBPAs and Cl_yBr_xBPAs, respectively. To reveal the possible transformation pathways, the Gibbs free energy was calculated based on a radical substitution reaction. After "•Br" removal from tetrabromobisphenol A or other Br_xBPAs, the intermediate was more easily combined with "•H" than with "•Cl." In addition, the Cl_yBr_xBPA formation via "-•H + •Cl" by Br_xBPAs is nonspontaneous, thus limiting the further generation of Cl_yBr_xBPAs. This study not only provides ideas for the study of other mixed halogenated products, but also provides constructive suggestions for environmental source analysis by combining previous research on the occurrence of Cl_yBr_xBPAs in various environmental matrices.

Co-Pyrolysis Behavior, Kinetic and Mechanism of Waste-Printed Circuit Board with Biomass

Waste-printed circuit boards (WPCBs) account for approximately 3–6 wt% of total electronic waste. Due to their content of thermosetting materials and added brominated fire retardants, their recycling and disposal is difficult and not eco-friendly. Pyrolysis as a thermal degradation process may assist in the solution of this problem. In addition, using biomass as an additive can upgrade the bio-oil and fix bromines in the char. In this study, cotton stalk (CS) is chosen as an additive and kinetic of the pyrolysis of three samples namely: PCB, CS, and CS:PCB (50:50) were investigated by the thermogravimetric analyzer (TGA) at heating rates of 5, 10, and 15 K/min. Three non-isothermal methods: FWO, KAS, and Starink were found in good agreement with the TGA data; however, the FWO method was more efficient in the description of the degradation mechanism of solid-state reactions. For CS and CS:PCB (50:50), α was increased from 0.2 to 0.9 with the FWO method, and calculated Eα values were found in the range of 121.43–151.88 and 151.60–105.67 kJ/mol in zone 1, while 197.06–79.22 and 115.90–275.06 kJ/mol in zone 2, respectively. Whereas, for PCB in zone 1, Eα values were found to be in the range of 190.23–93.88 kJ/mol. The possible decomposition mechanism was determined by the Criado method, which was in agreement with the mechanism model for reaction order n = 3. The oil product was also analyzed using Fourier-Transform Infrared Spectroscopy analysis.

Opportunities and challenges for the application of post-consumer plastic waste pyrolysis oils as steam cracker feedstocks: To decontaminate or not to decontaminate?

Thermochemical recycling of plastic waste to base chemicals via pyrolysis followed by a minimal amount of upgrading and steam cracking is expected to be the dominant chemical recycling technology in the coming decade. However, there are substantial safety and operational risks when using plastic waste pyrolysis oils instead of conventional fossil-based feedstocks. This is due to the fact that plastic waste pyrolysis oils contain a vast amount of contaminants which are the main drivers for corrosion, fouling and downstream catalyst poisoning in industrial steam cracking plants. Contaminants are therefore crucial to evaluate the steam cracking feasibility of these alternative feedstocks. Indeed, current plastic waste pyrolysis oils exceed typical feedstock specifications for numerous known contaminants, e.g. nitrogen (∼1650 vs. 100 ppm max.), oxygen (∼1250 vs. 100 ppm max.), chlorine (∼1460vs. 3 ppm max.), iron (∼33 vs. 0.001 ppm max.), sodium (∼0.8 vs. 0.125 ppm max.)and calcium (∼17vs. 0.5 ppm max.). Pyrolysis oils produced from post-consumer plastic waste can only meet the current specifications set for industrial steam cracker feedstocks if they are upgraded, with hydrogen based technologies being the most effective, in combination with an effective pre-treatment of the plastic waste such as dehalogenation. Moreover, steam crackers are reliant on a stable and predictable feedstock quality and quantity representing a challenge with plastic waste being largely influenced by consumer behavior, seasonal changes and local sorting efficiencies. Nevertheless, with standardization of sorting plants this is expected to become less problematic in the coming decade.

Biotransformation of 2,4,6-tris(2,4,6-tribromophenoxy)-1,3,5-triazine (TTBP-TAZ) can contribute to high levels of 2,4,6-tribromophenol (2,4,6-TBP) in humans

2,4,6-Tribromophenol (2,4,6-TBP) is a brominated flame retardant that accumulates in human tissues and is a potential toxicant. Previous studies found 2,4,6-TBP levels in human tissues were significantly higher than those of brominated flame retardants measured in the same samples. In contrast, the levels of 2,4,6-TBP in the environment and foodstuff are not elevated, suggesting a low potential for direct intake through environmental exposure or diet. Here, we hypothesized that high levels of 2,4,6-TBP in human tissues are partially from the indirect exposure sources, such as biotransformation of highly brominated substances. We conducted in vitro assays utilizing human and rat liver microsomes to compare the biotransformation rates of four highly brominated flame retardants, which could potentially transform to 2,4,6-TBP, including decabromodiphenyl ethane (DBDPE), 2,4,6-tris-(2,4,6-tribromophenoxy)-1,3,5-triazine (TTBP-TAZ), 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE), and tetrabromobisphenol A (TBBPA). Our results show that TTBP-TAZ rapidly metabolizes in both human and rat liver microsomes with a half-life of 1.1 and 2.2 h, respectively, suggesting that TTBP-TAZ is a potential precursor of 2,4,6-TBP. In contrast, 2,4,6-TBP was not formed as a result of biotransformation of TBBPA, BTBPE, and DBDPE in both human and rat liver microsomes. We applied suspect and target screening to explore the metabolic pathways of TTBP-TAZ and identified 2,4,6-TBP as a major metabolite of TTBP-TAZ accounting for 87% of all formed metabolites. These in vitro results were further tested by an in vivo experiment in which 2,4,6-TBP was detected in the rat blood and liver at concentrations of 270 ± 110 and 50 ± 14 μg/g lipid weight, respectively, after being exposed to 250 mg/kg body weight/day of TTBP-TAZ for a week. The hepatic mRNA expression demonstrated that TTBP-TAZ significantly activates the aryl hydrocarbon receptor (AhR) and promotes fatty degeneration (18 and 28-fold change compared to control, respectively) in rats.

DFT studies on pyrolysis mechanisms of tetrabromobisphenol A (TBBPA)

Tetrabromobisphenol A (TBBPA) is the most widely used brominated flame retardant. In order to better understand the decomposition process of TBBPA and clarify the evolution process of the main pyrolysis products, the density functional theory (DFT) method PBE0/6-311G(d) has been used to investigate the pyrolysis mechanisms of TBBPA in this study. Seven possible pyrolysis reaction paths were proposed, and the kinetic parameters in all pyrolysis paths were calculated. The calculation results indicate that in initial degradation of TBBPA without the involvement of hydrogen radical, the demethylation reaction is the main pyrolysis reaction channel, and the keto-enol tautomerization reaction is the main competitive pyrolysis reaction channel. The brominated cyclohexadienone formed through the keto-enol tautomerization is prone to further debromination to generate Br radical. The involvement of hydrogen radical significantly lowers the energy barrier of TBBPA decomposition. When a hydrogen radical is involved in the pyrolysis process, the debromination reaction becomes the major pyrolysis reaction channel, and the homolytic cleavage of C_aromatic-C bond becomes the major competitive pyrolysis reaction channel.

Low-temperature oxidation of monobromobenzene: Bromine transformation and yields of phenolic species

Brominated benzenes and phenols constitute direct precursors in the formation of bromine-bearing pollutants; most notably PBDD/Fs and other dioxin-type compounds. Elucidating accurate mechanisms and constructing robust kinetic models for the oxidative transformation of bromobenzenes and bromophenols into notorious Br-toxicants entail a comprehensive understanding of their initial oxidation steps. However, pertinent mechanistic studies, based on quantum chemical calculations, have only focused on secondary condensation reactions into PBDD/Fs and PBDEs. Literature provide kinetic parameters for these significant reactions, nonetheless, without attempting to compile the acquired Arrhenius coefficients into kinetic models. To fill in this gap, this study sets out to illustrate primary chemical phenomena underpinning the low-temperature combustion of a monobromobenzene molecule (MBZ) based on a detail chemical kinetic model. The main aim is to map out temperature-dependent profiles for major intermediates and products. The constructed kinetic model encompasses several sub-mechanisms (i.e, HBr and benzene oxidation, bromination of phenoxy radicals, and initial reaction of oxygen molecules with MBZ). In light of germane experimental observations, the formulated kinetic model herein offers an insight into bromine speciation, conversion profile of MBZ, and formation of higher brominated congeners of benzene and phenol. For instance, the model satisfactorily accounts for the yields of dibromophenols from oxidation of a 2-bromophenol (2-MBP) molecule, in reference to analogous experimental measurements. From an environmental perspective, the model reflects the accumulation of appreciable loads of 2-bromophenoxy radicals at intermediate temperatures (i.e., a bromine-containing environmental persistent free radical, EPFR) from combustion of MBZ and 2-MBP molecules. Acquired mechanistic/kinetic parameters shall be useful in comprehending the complex bromine transformation chemistry in real scenarios, most notably those prevailing in thermal recycling of brominated flame retardants (BFRs).

Mitigation of bromine-containing products during pyrolysis of polycarbonate-based tetrabromobisphenol A in the presence of copper(I) oxide

Polycarbonate (PC) is an engineering thermoplastic that is widely used in electrical and electronic equipment. This plastic often contains tetrabromobisphenol A (TBBA), the most common brominated flame retardant. Thermal degradation of the PC-TBBA leads to generation of numerous bromo-organic products in the pyrolytic oil, hindering its appropriate utilization, as well as corrosive hydrogen bromide gas. The purpose of this study was to experimentally investigate and compare the pyrolysis products of PC-TBBA and PC-TBBA + Cu₂O at various temperatures, with an emphasis on the yield and distribution of brominated compounds. In pyrolysis of PC-TBBA + Cu₂O, at the maximum degradation temperature (600 °C), as much as 86% of total Br was trapped in the residue, while 3% and 11% were distributed in the condensate and gas fractions, respectively. In contrast, the distribution of Br from non-catalytic pyrolysis of PC-TBBA (600 °C) was 0.5% residue, 40% condensate, and 60% gas. The results of this study revealed that in the presence of Cu₂O, organo-bromine products were most likely involved in Ullman-type coupling reactions, leading to early cross-linking of the polymer network that efficiently hinders their vaporization. HBr in the gas fraction was suppressed due to effective fixation of bromine in residue in the form of CuBr.

Dissolution and separation of non-metallic powder from printed circuit boards by using chloride solvent

Non-metallic components (NMC) in waste printed circuit boards (WPCBs) are made of the thermosetting epoxy resin and glass fiber, which has been a research concern in the waste recycling area. The recycling of thermosetting epoxy resin is a serious challenge due to their permanent cross-linked structure. An efficient approach to chemical recycling of epoxy resin for resource reutilization was developed in this research. ZnCl₂/CH₃COOH aqueous solution was selected as catalysts system to decompose epoxy resin under a mild reaction condition. The influence of reaction parameters such as reaction temperature, time, liquid-solid ratio and ZnCl₂ amount on the decomposition efficiency of epoxy resin and reaction mechanism were investigated. The physical and chemical properties of NMC, reaction solvent and decomposed products were analyzed using scanning electron microscope(SEM), Fourier transform infrared spectroscopy (FT-IR) and Gas chromatography-mass spectrometry (GC-MS). Results showed that up to 81.85% of epoxy resin could be dissolved by using a temperature of 190 °C during 8 h with a mixture of acetic acid (15 wt%): ZnCl₂ (5 g) 20 mL/g. Incompletely coordinated zinc ions enables the cleavage of CN, CBr and CO bonds in the thermosetting brominated epoxy resin, which was mainly converted to phenol, 2-Bromophenol and 2, 4-Dibromophenol with high resource value. And the functional groups of ethyl acetate and acetic acid maintained chemical structure before and after reaction. This research provided a practical approach to the dissolution and reutilization of NMC in WPCBs.

Debrominated high quality oil production by the two-step catalytic pyrolysis of phenolic printed circuit boards (PPCB) using natural clays and HY

The two-step catalytic pyrolysis (CP) of a phenolic-printed circuit board (PPCB) over in-situ natural clays (dolomite, bentonite, and olivine) and ex-situ HY(30, SiO₂/Al₂O₃: 30) was investigated by tandem micro reactor-gas chromatography/mass spectrometry. The non-catalytic pyrolysis (NCP) of PPCB produced oxygenated, phosphorous, and brominated compounds due to the presence of paper, tetrabromo bisphenol A (TBBA), phosphorous flame retardants, and phenol resin in the PPCB. Among the natural clays, dolomite showed the highest debromination and aromatics formation efficiency during the in-situ CP of PPCB followed by bentonite and olivine owing to the different catalyst properties. Two-step CP of PPCB over in-situ natural clays and ex-situ HY(30) achieved higher efficiency on the formation of higher quality oil (mono-phenol and aromatic hydrocarbons) with a lower Br content than the one-step CP of PPCB. Among the two-step catalysts, the combination of in-situ dolomite and ex-situ HY(30) provided the highest quality oil production due to the high acidity and sufficiently large pore size of dolomite. Two-step CP of PPCB over in-situ dolomite and ex-situ HY(30) also revealed a longer lifetime than the one-step CP of PPCB over ex-situ HY(30), not only for the formation of aromatic hydrocarbons and mono-phenols, but also for debromination.

Degradation of the Polymeric Brominated Flame Retardant "Polymeric FR" by Heat and UV Exposure

Monomeric brominated flame retardants often pose risks to the environment. The new group of polymeric flame retardants is claimed to be a safer alternative due to their high molecular weight and persistence by design. Within this publication, the degradation of a commercially widely applied example of this group-the polymer "Polymeric FR"-was studied during UV irradiation and long-term exposure to heat (60 °C) for up to 36 weeks. Both treatments led to a variety of degradation products, which might have potentially adverse environmental effects and an increased mobility compared to the mother polymer. Besides identifying some of the possible degradation products (including for instance 2,4,6-tribromo-3-hydroxybenzoic acid), the degradation via UV irradiation, which yields 75 different degradation products, and via heat, which led to significantly less products, was compared. In addition, further parameters like TOC and the concentration of free bromine were studied and it was demonstrated that the used type of water (distilled, reconstituted, and rainwater) does not influence the outcome of the degradation experiments.

Environmental concentrations and toxicology of 2,4,6-tribromophenol (TBP)

2,4,6-Tribromophenol is the most widely produced brominated phenol. In the present review, we summarize studies dealing with this substance from an environmental point of view. We cover concentrations in the abiotic and biotic environment including humans, toxicokinetics as well as toxicodynamics, and show gaps of the current knowledge about this chemical. 2,4,6-Tribomophenol occurs as an intermediate during the synthesis of brominated flame retardants and it similarly represents a degradation product of these substances. Moreover, it is used as a pesticide but also occurs as a natural product of some aquatic organisms. Due to its many sources, 2,4,6-tribromophenol is ubiquitously found in the environment. Nevertheless, not much is known about its toxicokinetics and toxicodynamics. It is also unclear which role the structural isomer 2,4,5-tribromophenol and several degradation products such as 2,4-dibromophenol play in the environment. Due to new flame retardants that enter the market and can degrade to 2,4,6-tribromophenol, this compound will remain relevant in future years - not only in aquatic matrices, but also in house dust and foodstuff, which are an important exposure route for humans.

Recycling of plastic waste: Screening for brominated flame retardants (BFRs)

Flame retardants are chemicals vital for reducing risks of fire and preventing human casualties and property losses. Due to the abundance, low cost and high performance of bromine, brominated flame retardants (BFRs) have had a significant share of the market for years. Physical stability on the other hand, has resulted in dispersion and accumulation of selected BFRs in the environment and receiving biota. A wide range of plastic products may contain BFRs. This affects the quality of waste plastics as secondary resource: material recycling may potentially reintroduce the BFRs into new plastic product cycles and lead to increased exposure levels, e.g. through use of plastic packaging materials. To provide quantitative and qualitative data on presence of BFRs in plastics, we analysed bromophenols (tetrabromobisphenol A (TBBPA), dibromophenols (2,4- and 2,6-DBP) and 2,4,6-tribromophenol (2,4,6-TBP)), hexabromocyclododecane stereoisomers (α-, β-, and γ-HBCD), as well as selected polybrominated diphenyl ethers (PBDEs) in samples of household waste plastics, virgin and recycled plastics. A considerable number of samples contained BFRs, with highest concentrations associated with acrylonitrile butadiene styrene (ABS, up to 26,000,000ngTBBPA/g) and polystyrene (PS, up to 330,000ng∑HBCD/g). Abundancy in low concentrations of some BFRs in plastic samples suggested either unintended addition in plastic products or degradation of higher molecular weight BFRs. The presence of currently restricted flame retardants (PBDEs and HBCD) identified in the plastic samples illustrates that circular material flows may be contaminated for extended periods. The screening clearly showed a need for improved documentation and monitoring of the presence of BFRs in plastic waste routed to recycling.

Waste Printed Circuit Board (PCB) Recycling Techniques

With the development of technologies and the change of consumer attitudes, the amount of waste electrical and electronic equipment (WEEE) is increasing annually. As the core part of WEEE, the waste printed circuit board (WPCB) is a dangerous waste but at the same time a rich resource for various kinds of materials. In this work, various WPCB treatment methods as well as WPCB recycling techniques divided into direct treatment (landfill and incineration), primitive recycling technology (pyrometallurgy, hydrometallurgy, biometallurgy and primitive full recovery of NMF-non metallic fraction), and advanced recycling technology (mechanical separation, direct use and modification of NMF) are reviewed and analyzed based on their advantages and disadvantages. Also, the evaluation criteria are discussed including economic, environmental, and gate-to-market ability. This review indicates the future research direction of WPCB recycling should focus on a combination of several techniques or in series recycling to maximize the benefits of process.

Mechanistic and kinetic investigation on OH-initiated oxidation of tetrabromobisphenol A

Detailed mechanism of the OH-initiated transformation of tetrabromobisphenol A (TBBPA) has been investigated by quantum chemical methods in this paper. Abstraction reactions of hydrogen atoms from the OH groups and CH3 groups of TBBPA are the dominant pathways of the initial reactions. The produced phenolic-type radical and alkyl-type radical may transfer to 4,4'-(ethene-1,1-diyl)bis(2,6-dibromophenol), 4-acetyl-2,6-dibromophenol and 2,6-dibromobenzoquinone at high temperature. In water, major products are 2,6-dibromo-p-hydroquinone, 4-isopropylene-2,6-dibromophenol and 4-(2-hydroxyisopropyl)-2,6-dibromophenol resulting from the addition reactions. Total rate constants of the initial reaction are 1.02 × 10(-12) cm(3) molecule(-1) s(-1) in gas phase and 1.93 × 10(-12) cm(3) molecule(-1) s(-1) in water at 298 K.

Study on simultaneous recycling of EAF dust and plastic waste containing TBBPA

In the present work we investigated the fates of zinc, lead, and iron present in electric arc furnace dust during thermal treatment of the dust with tetrabromobisphenol A (TBBPA) and tetrabromobisphenol A diglycidyl ether (TBBPADGE). Mixtures of these materials were compressed into pellets and heated in a laboratory-scale furnace at 550 °C for 80 min, under oxidizing and inert conditions. The solid, condensed, and gaseous-phase products were characterized using an array of analytical methods: scanning electron microscopy, X-ray diffraction, electron probe microscopy, inductively coupled plasma, ion chromatography, and gas chromatography. The results indicated that heating the mixtures under specific conditions enabled high separation of zinc and lead from iron-rich residues, by a bromination-evaporation process. In the case of TBBPADGE, a maximum of 85% of zinc and 81% of lead were effectively separated under the above conditions. The process is based on the reaction between the highly reactive HBr gas evolved during thermal degradation of the flame-retarded materials with zinc (ZnO and ZnFe2O4) and lead in the dust, followed by complete evaporation of the formed metallic bromides from the solid residue.

Formation of brominated pollutants during the pyrolysis and combustion of tetrabromobisphenol A at different temperatures

Tetrabromobisphenol A (TBBPA) is the most widely used brominated flame retardant worldwide. A detailed examination of the degradation products emitted during thermal decomposition of TBBPA is presented in the study. Runs were performed in a laboratory furnace at different temperatures (650 and 800 °C) and in different atmospheres (nitrogen and air). More than one hundred semivolatile compounds have been identified by GC/MS, with special interest in brominated ones. Presence of HBr and brominated light hydrocarbons increased with temperature and in the presence of oxygen. Maximum formation of PAHs is observed at pyrolytic condition at the higher temperature. High levels of 2,4-, 2,6- and 2,4,6- bromophenols were found. The levels of polybrominated dibenzo-p-dioxins and furans have been detected in the ppm range. The most abundant isomers are 2,4,6,8-TeBDF in pyrolysis and 1,2,3,7,8-PeBDF in combustion. These results should be considered in the assessment of thermal treatment of materials containing brominated flame retardants.

Occurrence, degradation, and effect of polymer-based materials in the environment

There is now a plethora of polymer-based materials (PBMs) on the market, because of the increasing demand for cheaper consumable goods, and light-weight industrial materials. Each PBM constitutes a mixture of their representative polymer/sand their various chemical additives. The major polymer types are polyethylene, polypropylene,and polyvinyl chloride, with natural rubber and biodegradable polymers becoming increasingly more important. The most important additives are those that are biologically active, because to be effective such chemicals often have properties that make them resistant to photo-degradation and biodegradation. During their lifecycle,PBMs can be released into the environment form a variety of sources. The principal introduction routes being general littering, dumping of unwanted waste materials,migration from landfills and emission during refuse collection. Once in the environment,PBMs are primarily broken down by photo-degradation processes, but due to the complex chemical makeup of PBMs, receiving environments are potentially exposed to a mixture of macro-, meso-, and micro-size polymer fragments, leached additives, and subsequent degradation products. In environments where sunlight is absent (i.e., soils and the deep sea) degradation for most PBMs is minimal .The majority of literature to date that has addressed the environmental contamination or disposition of PBMs has focused on the marine environment. This is because the oceans are identified as the major sink for macro PBMs, where they are known to present a hazard to wildlife via entanglement and ingestion. The published literature has established the occurrence of microplastics in marine environment and beach sediments, but is inadequate as regards contamination of soils and freshwater sediments. The uptake of microplastics for a limited range of aquatic organisms has also been established, but there is a lack of information regarding soil organisms, and the long-term effects of microplastic uptake are also less well understood.There is currently a need to establish appropriate degradation test strategies consistent with realistic environmental conditions, because the complexity of environmental systems is lost when only one process (e.g., hydrolysis) is assessed in isolation. Enhanced methodologies are also needed to evaluate the impact of PBMs to soil and freshwater environments.

Fate of lead oxide during thermal treatment with tetrabromobisphenol A

In this paper, the bromination reaction between lead oxide and hydrogen bromide originating from the thermal decomposition of tetrabromobisphenol A (TBBPA), under inert and oxidizing atmospheres, was investigated, using a laboratory-scale furnace. The results obtained under inert conditions indicated that bromination of PbO proceeded simultaneously with debromination of TBBPA, with an average effectiveness of 69% (max. 80%). Volatilization of the formed PbBr2 began at 315°C, intensified at 750°C, and reached 98% at 850°C. The formed organic char served as a source of carbon for reduction of the unreacted lead oxide to metallic lead in the range 315-750°C. Additional experiments conducted at selected temperatures under slightly oxidizing (5 vol% O2) and quasi-atmospheric (20 vol% O2) conditions showed no significant effects on bromination-evaporation of lead in the studied mixture. However, in isothermal treatment under quasi-atmospheric oxygen levels, complete vaporization of the formed lead bromide was obtained at a temperature of only 650°C.

Distribution of copper, silver and gold during thermal treatment with brominated flame retardants

The growing consumption of electric and electronic equipment results in creating an increasing amount of electronic waste. The most economically and environmentally advantageous methods for the treatment and recycling of waste electric and electronic equipment (WEEE) are the thermal techniques such as direct combustion, co-combustion with plastic wastes, pyrolysis and gasification. Nowadays, this kind of waste is mainly thermally treated in incinerators (e.g. rotary kilns) to decompose the plastics present, and to concentrate metals in bottom ash. The concentrated metals (e.g. copper, precious metals) can be supplied as a secondary raw material to metal smelters, while the pyrolysis of plastics allows the recovery of fuel gases, volatilising agents and, eventually, energy. Indeed, WEEE, such as a printed circuit boards (PCBs) usually contains brominated flame retardants (BFRs). From these materials, hydrobromic acid (HBr) is formed as a product of their thermal decomposition. In the present work, the bromination was studied of copper, silver and gold by HBr, originating from BFRs, such as Tetrabromobisphenol A (TBBPA) and Tetrabromobisphenol A-Tetrabromobisophenol A diglycidyl ether (TTDE) polymer; possible volatilization of the bromides formed was monitored using a thermo-gravimetric analyzer (TGA) and a laboratory-scale furnace for treating samples of metals and BFRs under an inert atmosphere and at a wide range of temperatures. The results obtained indicate that up to about 50% of copper and silver can evolve from sample residues in the form of volatile CuBr and AgBr above 600 and 1000°C, respectively. The reactions occur in the molten resin phase simultaneously with the decomposition of the brominated resin. Gold is resistant to HBr and remains unchanged in the residue.

Debromination of 2,4,6-tribromophenol coupled with biodegradation

The application effect of aluminium and their alloys and mixtures with nickel was studied for the complete hydrodebromination of 2,4,6-tribromophenol (TBP) to phenol in aqueous NaOH solution at room temperature. It was found that the Raney Al-Ni alloy can rapidly transform TBP to phenol. Removal efficiency of 25 mM TBP solution in aqueous NaOH (15 g L−1) solution at the end of 1h reaction was 100% using 4 g L−1 Al-Ni. The hydrodebromination is accompanied by the dissolution of aluminium and formation of soluble Al(OH)4−1 anions under these reaction conditions. After completion of the hydrodebromination reaction removal of the dissolved metals was achieved by precipitation of appropriate hydroxides by adjustment of the pH value and filtration, the filtrate was treated with Pseudomonas or Rhodococcus bacterial strains to degrade dissolved phenol. The combined application of both (chemical-biological) treatments produced degradations of 100% of aromatic compounds.

Vaporization of zinc during thermal treatment of ZnO with tetrabromobisphenol A (TBBPA)

In the present work we investigate the vaporization of zinc or its compounds during thermal treatment of ZnO with tetrabromobisphenol A. Samples of 2g of ZnO:TBBPA (3.34:1) were isothermally heated in a laboratory-scale furnace at temperatures from 490 °C to 950 °C, and the solid, condensed and gaseous products formed were analyzed by X-ray diffraction analysis, electron probe microanalysis, inductively coupled plasma analysis, ion chromatography, and gas chromatography coupled with mass spectrometry. The results obtained indicate that the vaporization of ZnBr(2) formed strongly depends on heating time and temperature, yet is restrained by char, if formed with sufficient yield (above 15 wt%). Starting from 850 °C, this char commences carbothermic reduction of any remaining ZnO, which from then begins to evaporate as zinc metal vapor. Volatilization of zinc is completed at 950 °C. The presence of 5 vol.% of oxygen has no significant effect on the vaporization of formed ZnBr(2), the carbothermic reduction or the volatilization of metallic zinc. Strongly oxidizing conditions (20 vol.% of oxygen), however, boost the oxidation of char and thus the vaporization of ZnBr(2), but prevent carbothermic reduction of any un-reacted ZnO by depleting this char.

Ecotoxicity of a brominated flame retardant (tetrabromobisphenol A) and its derivatives to aquatic organisms

The large use of tetrabromobisphenol A (B(4)BPA) in common products (plastics, electric and electronic equipments) has raised concern about its ecotoxicity. Physical and bio-degradations may lead to the formation of tetrabromobisphenol A derivatives like tri- (B(3)BPA), di- (B(2)BPA), monobromobisphenol A (B(1)BPA) and bisphenol A (BPA). However, little is known about the toxicity of these brominated derivatives. An appraisal on the ecotoxicity of B(4)BPA and its derivatives was carried out with several bioassays representing organisms (bacteria, algae, micro-invertebrates and fish) of different taxonomic groups present in aquatic ecosystems. Endpoint values showed that B(4)BPA was significantly less toxic than the other chemicals when tested with the Microtox and algal asssays. A similar trend was observed with other bioassays for BPA. One of the brominated derivatives was particularly toxic: B(2)BPA. The LuminoTox assay and the rainbow trout hepatocytes assay reported the most significant toxicity for this derivative. Its toxicity was also significantly higher than the other compounds barring B(3)BPA when tested with the micro-crustacean test.

Characteristics of exhaust gas, liquid products, and residues of printed circuit boards using the pyrolysis process

INTRODUCTION

The pyrolytic method was employed to recycle metals and brominated compounds blended into printed circuit boards (PCBs).

METHODS

PCBs were crushed into pieces 4.0-4.8 mm in size, and the crushed pieces were pyrolyzed at temperatures ranging from 200 to 500 degrees C. The compositions of pyrolytic residues, liquid products, and exhaust were analyzed by inductively coupled plasma atomic emission spectrometer, inductively coupled plasma mass spectrometry, and gas chromatography-mass spectrometry. Pyrolytic exhaust was collected by an impinger system in an ice bath cooler to analyze the composition fraction of the liquid product, and uncondensable exhaust was collected for gas constituent analysis.

RESULTS

Phenol, methyl-phenol, and bromo-phenol were attributed mainly to the liquid product. Metal content was low in the liquid product. In addition, CO, CO(2), CH(4), and H(2) were the major components of pyrolytic exhaust.

CONCLUSIONS

Brominated and chlorinated compounds-i.e., dichloromethane, trans-1,2 dichloroethylene, cis-1,2 dichloroethylene, 1,1,1-trichloroethane, tetrachloromethane, bromophenol, and bromoform-could be high, up to the several parts per million (ppm) level. Low molecular weight volatile organic compounds (VOCs)-i.e., methanol, acetone, ethyl acetate, acrylonitrile, 1-butene, propene, propane, and n-butane-contributed a large fraction of VOCs. The concentrations of toluene, benzene, xylene, ethylbenzene, and styrene were in the ppm range.

Influence of temperature and heating time on bromination of zinc oxide during thermal treatment with tetrabromobisphenol A

Our prior research indicates that hydrogen bromide (HBr) evolved during thermal decomposition of tetrabromobisphenol A (TBBPA) can be utilized as a reagent for selective bromination and evaporation of zinc oxide. The present work investigated dependency of the bromination reaction on time at selected temperatures using a laboratory-scale furnace. The formed solid, condensed, and gaseous products were analyzed by X-ray diffraction analysis, electron probe microanalysis, inductively coupled plasma analysis, ion chromatography, and gas chromatography coupled with mass spectrometry. Results indicate that the bromination rate is strongly dependent on heating time. This dependency is a direct consequence of progress in the decomposition of TBBPA, which provides inorganic bromine suitable for the reaction. The bromination rate increases with time until the bromine source is depleted. The process is shorter at higher applied temperatures and appears instantaneous at 310 degrees C and above. However, the maximum bromination yield is independent of the applied conditions and ranges from 64 to 70%. Additionally, the influence of oxidizing conditions on the bromination reaction and the effect of ZnO on decomposition of TBBPA were investigated in this study.

Studies on bromination and evaporation of zinc oxide during thermal treatment with TBBPA

Thermodynamic considerations indicate that base metal oxides such as ZnO, PbO, Cu2O, etc. should easily react with HBr, the main gaseous product from the thermal decomposition of tetrabromobisphenol A (TBBPA), to form low boiling point metallic bromides suitable for volatile separation. In this work a differential scanning calorimeter and laboratory-scale furnace was used to investigate the scope and conditions for the bromination of ZnO by the thermal decomposition of TBBPA. The formed solid, condensed, and gaseous products were analyzed by X-ray diffraction analysis, electron probe microanalysis, inductively coupled plasma analysis, ion chromatography, and gas chromatography coupled with mass spectrometry. The results obtained in this study indicate that the bromination of ZnO occurred at 272 degrees C (DSC) and above 290 degrees C (furnace) with an effectiveness of 41, 64, and 81% dependent on the experimental conditions. Volatilization of the formed ZnBr2 began at 340 degrees C and had a 45% yield at 650 degrees C. This yield corresponded to 28-36% of the original zinc content in the mixture under the present experimental conditions.

Identification and trace level determination of brominated flame retardants by liquid chromatography/quadrupole linear ion trap mass spectrometry

We describe the development of instrumental methodology for the simultaneous determination of hexabromocyclododecane (HBCD) diastereoisomers and tetrabromobisphenol A (TBBPA) and its derivatives by liquid chromatography/quadrupole linear ion trap mass spectrometry (LC-QqLIT-MS). Two different experiments were developed, optimized and compared. The first is based on a selected reaction monitoring (SRM) method in which the two most abundant transitions were selected for each analyte, as well as for the internal standards. In the second, the ion trap was used for the storage and subsequent fragmentation of precursor ions, obtaining an enhanced product ion (EPI) experiment. Both methods were validated by measuring quality parameters such as linearity, sensitivity, reproducibility and repeatability. Limits of detection (LODs) were in the range of 0.1-1.8 pg and 0.01-0.5 pg for SRM and EPI experiments, respectively, being lower than those published for the LC/QqQ-MS methods. Thus, LC-QqLIT-MS, used for quantification and confirmation, proved to be a powerful and very sensitive analytical tool.

Pyrolysis of tetrabromobisphenol-A containing paper laminated printed circuit boards

Tetrabromobisphenol-A (TBBA) is the most common brominated fire retardant. In this study, a TBBA containing paper laminated printed circuit board (PCB) prepared from novolac was pyrolysed by both TGA and in a quartz glass reactor between 40 and 1,000 degrees C. The products were online detected by MS. It was found that the PCB degraded in three steps. Step one (<270 degrees C) consisted of the evolution of water and CO(2) from the paper laminate. In the second step, between 270 and 370 degrees C, the fire retardant decomposed, releasing HBr and brominated aromatics. In the third step, at temperatures above 370 degrees C, the phenol resin decomposed and char was formed. Compared to pure TBBA, which mainly produces brominated phenols, the brominated products enclosed in the char released HBr during the last degradation step as well as during the second step. Most of the bromine left the resin in the form of HBr, with about 14% of the bromine being fixed in brominated aromatics and less than 2% remaining in the residue.

Microwave discharge electrodeless lamps (MDEL). III. A novel tungsten-triggered MDEL device emitting VUV and UVC radiation for use in wastewater treatment

Exposure to low doses of the xenoestrogen bisphenol A (BPA) and to the hormonal 2,4-dichlorophenoxyacetic acid (2,4-D) herbicide, an environmental endocrine disruptor, can have serious health consequences such as the induction of mammary gland ductal hyperplasias and carcinoma (LaChapelle et al., Reprod. Toxicol., 2007, 23, 20; Murray et al., Reprod. Toxicol., 2007, 23, 383). To the extent that these toxins are present in wastewaters (Donald et al., Sci. Total Environ. 1999, 231, 173; Brotons et al., Environ. Health Perspect. 1994, 103, 608; Olea et al., Environ. Health Perspect. 1996, 104, 298; Biles et al., J. Agric. Food Chem. 1997, 45, 3541; Markey et al., J. Steroid Biochem. Mol. Biol., 2003, 83, 235), we examined their oxidative destruction in aqueous media by a novel light source. A tungsten-triggered microwave discharge electrodeless lamp (W-MDEL) was fabricated for possible use in wastewater treatment using vacuum UV-transparent quartz in which a tungsten trigger, also embedded in quartz, was attached to the MDEL to aid in the self-ignition of the lamp on irradiation at low microwave power levels. The quantity of mercury gas in the W-MDEL was optimized by monitoring the continuous radiation and peak intensities of the emitted light in the vacuum UV (VUV) and UVC regions. The usefulness of the W-MDEL device was assessed through the degradation of 2,4-D and BPA in air-equilibrated aqueous media and in oxygen-saturated aqueous media. Enhanced degradation of these two xenoestrogenic toxins was achieved by increasing the number of W-MDEL devices while keeping constant the microwave radiation feeding each W-MDEL lamp. This novel lamp provides an additional light source in the photooxidation of environmental contaminants without the need for a metal-oxide photocatalyst. Under our conditions, process dynamics using the W-MDEL light source are greater than with the more conventional photochemical methods that employ low-pressure Hg arc electrode lamps in synthetic quartz to degrade these two toxic contaminants.

Pyrolysis characteristics of integrated circuit boards at various particle sizes and temperatures

A pyrolysis method was employed to recycle the metals and brominated compounds blended into printed circuit boards. This research investigated the effect of particle size and process temperature on the element composition of IC boards and pyrolytic residues, liquid products, and water-soluble ionic species in the exhaust, with the overall goal being to identify the pyrolysis conditions that will have the least impact on the environment. Integrated circuit (IC) boards were crushed into 5-40 mesh (0.71-4.4mm), and the crushed particles were pyrolyzed at temperatures ranging from 200 to 500 degrees C. The thermal decomposition kinetics were measured by a thermogravimetric (TG) analyzer. The composition of pyrolytic residues was analyzed by Energy Dispersive X-ray Spectrometer (EDS), Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES) and Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). In addition, the element compositions of liquid products were analyzed by ICP-AES and ICP-MS. Pyrolytic exhaust was collected by a water-absorption system in an ice-bath cooler, and IC analysis showed that the absorbed solution comprised 11 ionic species. Based on the pyrolytic kinetic parameters of TG analysis and pyrolytic residues at various temperatures for 30 min, the effect of particle size was insignificant in this study, and temperature was the key factor for the IC board pyrolysis. Two stages of decomposition were found for IC board pyrolysis under nitrogen atmosphere. The activation energy was 38-47 kcal/mol for the first-stage reaction and 5.2-9.4 kcal/mol for the second-stage reaction. Metal content was low in the liquid by-product of the IC board pyrolysis process, which is an advantage in that the liquid product could be used as a fuel. Brominate and ammonium were the main water-soluble ionic species of the pyrolytic exhaust. A plan for their safe and effective disposal must be developed if the pyrolytic recycling process is to be applied to IC boards.

Catalytic destruction of brominated aromatic compounds studied in a catalyst microbed coupled to gas chromatography/mass spectrometry

The capability of solid porous catalysts has been studied for the destruction or modification of halogenated aromatic compounds contaminating the pyrolysis oil of recycled plastics from electronic waste. A fast and simple experimental procedure is carried out using a micropyrolyser coupled to GC-MS in such a way that catalyst microbed was placed in the sample tube of the pyrolyser. The pyrolysis products of polycarbonate blended with a frequently applied flame retardant tetrabromobisphenol A (TBBPA) and epoxy resin containing TBBPA monomer units have been analysed, and the brominated components were compared with the thermal decomposition products of TBBPA and its diallyl ether. When TBBPA vapour passes through molecular sieve 4A a slight debromination and a partial cleavage of bisphenol A into phenols occur. Over molecular sieves of larger pore size (13X and NaY zeolite) an important decrease of TBBPA amount is observed indicating effective trapping ability of these catalysts of basic character for brominated aromatic compounds. A total chemical modification of the vapour was achieved by Al-MCM-41 catalyst that split TBBPA into bromophenols. Analogous results were obtained by carrying out similar experiments on diallyl ether of TBBPA. Moreover, it was revealed that brominated bisphenol A compounds are modified essentially the same way, either evaporated or evolved from a polycarbonate blend or produced by pyrolysis from an epoxy resin.

Halogenated natural products in five species of Antarctic sponges: compounds with POP-like properties?

Purified extracts of five species of Antarctic sponges (Demospongiae: Kirkpatrickia variolosa, Artemisina apollinis, Phorbas glaberrima, and Halichondria sp. and Calcarea: Leucetta antarctica) from King George Island were analyzed by GC/MS for the presence of persistent and lipophilic halogenated compounds to identify bioaccumulative halogenated natural products. Sample extracts were prepared using methods identical for the determination of POPs, namely, microwave-assisted extraction with organic solvents, gel permeation chromatography, and column chromatography on deactivated silica. In addition, samples were treated with sulfuric acid to remove acid-destructible compounds. PCBs were not detectable and only traces of lindane, p,p'-DDE, and alpha-HCH were detected in these samples in decreasing order of abundance, underscoring their uncontaminated state. In contrast, 146 brominated compounds were identified by correct isotopic ratios m/z 79 and 81, 50% of which eluted prior to lindane including the most abundant peaks. Each sponge sample contained > or = 35 brominated compounds of natural origin, 14 of which were detected in all species. Estimated concentrations ranged from the high ng/kg to mg/kg (air-dried weights) and relative distributions of the same compounds in different sponges were highly variable. The high abundance of these compounds relative to known anthropogenic pollutants strongly suggests a natural origin. Multiple mode (EI-, ECNI-, and PCI-) GC/MS enabled identification of an aliphatic ketone tentatively identified as 1,1,2-tribromo-oct-1-en-3-one, present in all species but highest in Phorbas glaberrima. Several halogenated phenols including 2,4,6-tribromophenol were also abundant in Phorbas glaberrima as were halogenated anisoles in lower relative abundances. The halogenated phenols were analyzed without derivatization. The sample of Halichondria sp. contained the dibromotrichloro monoterpene MHC-1, a recently described environmental contaminant in fish and seals. Retrospective analysis of other marine samples confirmed that 2,4,6-tribromophenol was present in seal blubber from both the Arctic and the Antarctic. The presence of naturally occurring organohalogens such as 2,4,6-tribromophenol and MHC-1 in Antarctic marine invertebrates thus provides a link to their occurrence in marine mammals.