Three-Liquid-Phase Extraction: A New Approach for Simultaneous Enrichment and Separation of Cr(III) and Cr(VI)

In vitro antiplasmodial activity-directed investigation and UPLC-MS fingerprint of promising extracts and fractions from Terminalia ivorensis A. Chev. and Terminalia brownii Fresen

ETHNOPHARMACOLOGICAL SIGNIFICANCE

Medicinal plants from the Terminalia genus are widely used as remedies against many infectious diseases, including malaria. As such, Terminalia ivorensis A. Chev. and Terminalia brownii Fresen. are famous due to their usefulness in traditional medicines to treat malaria and yellow fever. However, further information is needed on the extent of anti-Plasmodium potency of extracts and fractions from these plants and their phytochemical profile.

AIM OF THE STUDY

This study was designed to investigate the in vitro antiplasmodial activity and to determine the chemical profile of promising extracts and fractions from T. ivorensis and T. brownii stem bark.

MATERIALS AND METHODS

Crude aqueous, ethanolic, methanolic, hydroethanolic and ethyl acetate extracts were prepared by maceration from the stem barks of T. brownii and T. ivorensis. They were subsequently tested against chloroquine-sensitive (Pf3D7) and multidrug-resistant (PfDd2) strains of P. falciparum using the parasite lactate dehydrogenase (PfLDH) assay. Extracts showing very good activity on both plasmodial strains were further fractionated using column chromatography guided by evidence of antiplasmodial activity. All bioactive extracts and fractions were screened for their cytotoxicity on Vero and Raw cell lines using the resazurin-based assay and on erythrocytes using the hemolysis assay. The phytochemical profiles of selected potent extracts and fractions were determined by UPLC-QTOF-MS analysis.

RESULTS

Of the ten extracts obtained from both plant species, nine showed inhibitory activity against both P. falciparum strains (Pf3D7 and PfDd2), with median inhibitory concentration (IC₅₀) values ranging from 0.13 μg/ml to 10.59 μg/ml. Interestingly, the aqueous extract of T. ivorensis (Ti^W) and methanolic extract of T. brownii (Tb^M) displayed higher antiplasmodial activities against both strains (IC₅₀ 0.13-1.43 μg/ml) and high selectivity indices (SI > 100). Their fractionation led to two fractions from T. ivorensis and two from T. brownii that showed very promising antiplasmodial activity (IC₅₀ 0.15-1.73 μg/mL) and SI greater than 100. The hemolytic assay confirmed the safety of crude extracts and fractions on erythrocytes. UPLC-MS-based phytochemical analysis of the crude aqueous extract of T. ivorensis showed the presence of ellagic acid (1) and leucodelphidin (2), while analysis of the crude methanol extract of T. brownii showed the presence of ellagic acid (1), leucodelphinidin (2), papyriogenin D (3), dihydroactinidiolide (4) and miltiodiol (5).

CONCLUSIONS

The extracts and fractions from T. ivorensis and T. brownii showed very good antiplasmodial activity, thus supporting the traditional use of the two plants in the treatment of malaria. Chemical profiling of the extracts and fractions led to the identification of chemical markers and the known antimalarial compound ellagic acid. Further isolation and testing of other pure compounds from the active fractions could lead to the identification of potent antiplasmodial compounds.

Chitosan-based composite microspheres for treatment of hexavalent chromium and EBBR from aqueous solution

Hexavalent chromium is widely used in industrial fields, but its pollution has posed a great threat to the environment due to its high toxicity. We created a chitosan-based microsphere biosorbent (CP) by combining polyethyleneimine with chitosan adopting inverse emulsion polymerization method. Under the optimal conditions (pH = 3), the maximum adsorption capacity of composite microspheres can reach 299.89 mg g^-1, which is much higher than that of chitosan microspheres (168.91 mg g^-1). When the amount of CP is 0.25 g L^-1, the removal rate of 50 mg L^-1 Cr(VI) and 50 mg L^-1 Eriochrome blue-black R (EBBR) can reach 95% and 99%, respectively. The time required for CP to reach adsorption equilibrium (180 min) was significantly shorter than that of chitosan microspheres (540 min), and the adsorption rate was significantly improved. Langmuir isotherm model, pseudo-second-order kinetic model and thermodynamic calculation results penetrated an endothermic spontaneous, monolayer, and chemical adsorption process. Biomass composite microspheres CP has obvious selectivity and the adsorption capacity retention rate of CP was still 71.32% after four adsorption cycles. This work proposed an easily prepared and biomass-based microspheres for the effective removal of Cr(VI) in printing and dyeing wastewater pollution through adsorption.

Bio-guided isolation of anti-leishmanial natural products from Diospyros gracilescens L. (Ebenaceae)

BACKGROUND

Plants represent an intricate and innovative source for the discovery of novel therapeutic remedies for the management of infectious diseases. The current study aimed at discovering new inhibitors of Leishmania spp., using anti-leishmanial activity-guided investigation approach of extracts from Diospyros gracilescens Gürke (1911) (Ebenaceae), targeting the extracellular (promastigotes) and intracellular (amastigotes) forms of Leishmania donovani.

METHODS

The plant extracts were prepared by maceration using H20: EtOH (30:70, v/v) and further fractionated using a bio-guided approach. Different concentrations of D. gracilescens extracts, fractions and isolated compounds were tested in triplicate against L. donovani promastigotes and amastigotes in vitro. The antileishmanial potency and cytotoxicity on RAW 264.7 cells were determined using the resazurin colorimetric assay. The time kill kinetic profile of the most active sample was also investigated. The structures of all compounds were elucidated on the basis of extensive spectroscopic analyses, including 1D and 2D NMR, and HR-ESI-MS and by comparison of their data with those reported in the literature.

RESULTS

The hydroethanolic crude extract of D. gracilescens trunk showed the most potent antileishmanial activity (IC50 = 5.84 μg/mL). Further fractionation of this extract led to four (4) fractions of which, the hexane fraction showed the most potent activity (IC50 = 0.79 μg/mL), and seven (07) compounds that exhibited moderate potency (IC50 = 13.69-241.71 μM) against L. donovani. Compound 1-deoxyinositol (7) inhibited the promastigote and amastigote forms of L. donovani with IC50 values of 241.71 μM and 120 μM respectively and also showed the highest selectivity against L. donovani promastigotes (SI > 5.04). To the best of our knowledge, the antileishmanial activity of this compound is being reported here for the first time. The promising hexane fraction showed significant inhibition of parasites growth at different concentrations, but with no evidence of cidal effect over an exposure period of 120 h.

CONCLUSIONS

The results obtained indicated that the hydroethanolic extract from the D. gracilescens trunk and the derived hexane fraction have very potent inhibitory effect on cultivated promastigotes and amastigotes of L. donovani parasite. The isolated compounds showed a lesser extent of potency and selectivity. However, further structure-activity-relationship studies of 1-deoxyinositol could lead to more potent and selective hit derivatives of interest for detailed drug discovery program against visceral leishmaniasis.

Electrochemical Cr(VI) removal from aqueous media using titanium as anode: Simultaneous indirect electrochemical reduction of Cr(VI) and in-situ precipitation of Cr(III)

In this work, a novel method for complete Cr(Ⅵ) removal was achieved in a single-chamber cell with titanium (Ti) as anode via simultaneous indirect electro-reduction of Cr(Ⅵ) and in-situ precipitation of Cr(Ⅲ). The Cr(Ⅵ) and total Cr removal, and electric energy consumption were optimized as a function of electrochemical reactor, current density, initial Cr(Ⅵ) and chloride (Cl^-) concentration, and initial solution pH. The maximum Cr(Ⅵ) and total Cr removal efficiency reached 80.5 and 79.4% respectively within 12 h at current density of 10 mA cm^-2 as initial Cr(Ⅵ) concentration was 0.078 mM. Decreasing the initial solution pH was beneficial to Cr(Ⅵ) reduction, but Cr(Ⅲ) precipitation was inhibited, resulting in the poor total Cr removal. The suitable Cl^- concentration guaranteed sufficient reducing agents (Ti³⁺ and Ti²⁺) for Cr(Ⅵ) removal. The reaction mechanism demonstrated that Ti anode could be corroded to produce Ti³⁺ and Ti²⁺, which provided the electrons for reduction of Cr(Ⅵ) to Cr(Ⅲ). Simultaneously, the solid products (Ti₂O_(6x-y-z+52)Cl_2yCr_2x(OH)_2z(s)) were in-situ formed and precipitated from the solution due to the continuous generation of hydroxyl ion (OH^-) from cathode. This study might provide a new electrochemical method with non-precious metal as the electrode for complete Cr(Ⅵ) removal from aqueous media.

Evolution of Environmentally Friendly Strategies for Metal Extraction

The demand for the recovery of valuable metals and the need to understand the impact of heavy metals in the environment on human and aquatic life has led to the development of new methods for the extraction, recovery, and analysis of metal ions. With special emphasis on environmentally friendly approaches, efforts have been made to consider strategies that minimize the use of organic solvents, apply micromethodology, limit waste, reduce costs, are safe, and utilize benign or reusable materials. This review discusses recent developments in liquid- and solid-phase extraction techniques. Liquid-based methods include advances in the application of aqueous two- and three-phase systems, liquid membranes, and cloud point extraction. Recent progress in exploiting new sorbent materials for solid-phase extraction (SPE), solid-phase microextraction (SPME), and bulk extractions will also be discussed.

Some Features of the Ultrasonic Liquid Extraction of Metal Ions

The non-linear equation of the radial oscillations of a liquid ball in an immiscible liquid under the exposure of time-varying sound pressure was obtained. The behavioral features of a liquid spherical drop placed in such a media were analyzed in the presence of ultrasound irradiations. The slowing-down effect of the extracted metal ions under its exposure has been studied for the first time, using theoretical and experimental approaches. This phenomenon mechanism was revealed, and analytical equations for the mass transfer rate as a function of the sound pressure oscillations amplitude and the substrate ultrasonic treatment time are presented. Experimental studies of Fe3+ ions extracted from chloride and nitrate solutions in systems based on water-soluble polymers were carried out, and a convincing coincidence with the results of theoretical calculations was established. The conditions for achieving the desired extraction efficiency when applying the ultrasonic stimulating effect are specified. The derived result opens the complementary possibility in operations, with the separateness of extraction processes, that which has the essential practical importance.

Continuous in Situ Extraction toward Multiphase Complex Systems Based on Superwettable Membrane with Micro-/Nanostructures

Liquid-phase extraction is widely used in the chemical industry. Traditional extracting routes always involve multiple procedures, need a large floor space, and have long operating time. "Continuous in situ extraction" that can conduct a real-time integration of solutes extraction and solvents separation simultaneously would be of great significance. Superwettable materials offer us a good choice to separate different immiscible solvents; herein, we achieve continuous in situ extraction of multiphase complex systems by using a porous polytetrafluoroethylene membrane with nanostructure-induced superwettability. It realizes a rapid, selective, and efficient real-time removal of various extracting agents during a continuous process due to their wetting differences. Compared with traditional extraction, our route shows a distinct superiority on saving operating time, enhancing liquid recovery, and simplifying procedures, while still retaining high extracting performance. In addition, our membrane possesses excellent durability even after long-term work in harsh chemical environments or under strong mechanical impacts. Thus, we believe that it will provide a potential alternative for current industrial extractions.

Separation of vanadium(V) using N235 by three-phase system in concentrated HCl media

The third phase formed in the process of extracting vanadium in a N235/HCl system was usually regarded as a limit to the throughput of the plant. To have a deep insight on this problem, the formation of the third phase in the extraction of vanadium by tertiary amine N235 in the concentrated HCl system was studied. The optimum parameters of three-phase system extraction were determined, and FTIR analysis was carried out to characterize the structure of extracted complexes and analyze the mechanism of formation and elimination of the third phase. The results showed that vanadium extraction efficiency was 86.5% with 20% v/v N235 and a phase ratio (O:A) of 1:2 in 2 min at 25 °C, though an obvious third phase was found within the experimental HCl concentration range. Cl− is the participant in the process of increasing the vanadium extraction efficiency, whereas H+ has an inhibitory effect on vanadium extraction. Meanwhile, the structure of the extracted complex was confirmed as (R3N)m(HCl)m+x·([Formula: see text])·(H2O)n through a solvation mechanism with molecular association, which was further proved by FTIR spectral analysis. Furthermore, the limited solubility of the ion-extracted complexes in the nonpolar solvent kerosene made the third-phase form. The third phase disappeared when phase modifier (about 5% v/v TBP) was added into the organic phase, as the polarity of the organic phase increased.

An ecological new approach for treating Cr(VI)-containing industrial wastewater: Photochemical reduction

An ecological new approach for photochemical reduction of Cr(VI) in aqueous solution by adding into water-soluble copolymer, polyethylene glycol (PEG), was investigated. Various influences including light intensity, initial solution pH value, PEG molecular weight and initial concentration ratio of PEG to Cr(VI) on photochemical reduction of Cr(VI) were discussed, and a possible reaction mechanism was proposed. Experimental results revealed that Cr(VI) could be reduced to Cr(III) by PEG under sunlight irradiation. The photo-reduction rate of Cr(VI) increased with the decrease of solution pH and PEG molecular weight, but increased with the light intensity. The reduction percentage of Cr(VI) increased with the initial concentration ratio of PEG to Cr(VI). When the initial solution pH value was below 3.0, almost all of Cr(VI) was completely reduced to Cr(III) within 20 min of 50 × 10(3) lux solar irradiation in the presence of PEG. After photo-reduction, PEG and Cr(III) in aqueous solutions could be recovered by adding into a high-concentrated Na2SO4 aqueous solution to induce the formation of a stable PEG-based aqueous biphasic system. By doing so, Na2SO4 in aqueous solution could also be removed. The present work highlights a promising new route for treating the industrial wastewater containing toxic Cr(VI) ions by adding into environmental-friendly PEG for photo-reduction of Cr(VI) to Cr(III), and then salting-out recovery of PEG and removal of Cr(III) in wastewater by adding into another high-salt wastewater, so that the high-salt wastewater could also be treated.