Pharmaceutical Industry Wastewater: Review of the Technologies for Water Treatment and Reuse

The mechanism of microbial sulfate reduction in high concentration sulfate wastewater enhanced by maifanite

Excessive sulfate levels in water bodies pose a dual threat to the ecological environment and human health. The microbial removal of sulfate encounters challenges, particularly in environments with high sulfate concentrations, where the gradual accumulation of sulfide hampers microbial activity. This study focuses on elucidating the mechanisms underlying the enhancement of microbial sulfate reduction in high-concentration sulfate wastewater through a comparative analysis of maifanite and zeolite biostimulants. The investigation reveals that zeolite primarily facilitates microbial growth by providing attachment sites, while maifanite augments sulfate-reducing bacteria (SRB) activity through the release of active substances such as Mo, Ca, and Cu. The addition of maifanite proves instrumental in enhancing microbial activity, manifesting as increased microbial load and protein production, augmented extracellular polymer generation, accelerated electron transfer, and facilitated microbial growth and biofilm formation. Noteworthy is the observation that the combined application of maifanite and zeolite exhibited a synergistic effect, resulting in a 167 % and 68 % increase in sulfate reduction rate compared to the utilization of maifanite (0.12 d-1) or zeolite (0.19 d-1) in isolation. Within this synergistic context, the relative abundance of Desulfobacteraceae reaches a peak of 15.4 %. The outcomes of this study corroborate the distinct promotion mechanisms of maifanite and zeolite in microbial sulfate reduction, offering novel insights into the application of maifanite in the context of high-concentration sulfate removal.

A comparative study on performance of the conventional and fixed-bed membrane bioreactors for treatment of Naproxen from pharmaceutical wastewater

Here, a comparative study was designed to survey the treatment efficiency of pharmaceutical wastewater containing Naproxen by Membrane bioreactor (MBR) and MBR with fixed-bed packing media (FBMBR). To this end, the performance of MBR and FBMBR in different aeration conditions including average DO (1.9-3.8 mg/L), different organic loading (OLR) (0.86, 1.14 and 1.92 kg COD per cubic meter per day), and Naproxen removal efficiency. The BOD5 removal efficiency, effluent quality and membrane fouling were monitored within 140 days. The results obtained from the present study indicated that COD removal efficiency for FBMBR (96.46%) was higher than that for MBR (95.33%). In addition, a high COD removal efficiency was experienced in both MBR and FBMBR in operational conditions 3 and 4, even where OLR increased from 1.14 to 1.92 kgCOD/m3 d and DO decreased from 4 to < 1 mg/L. Furthermore, the higher Naproxen removal efficiency was observed in FBMBR (94.17%) compared to that for MBR (92.76%). Therefore, FBMBR is a feasible and promising method for efficient treatment of pharmaceuptical wastewater with high concentrations of emerging contaminant, especially, the Naproxen.

Interconnected environmental challenges: heavy metal-drug interactions and their impacts on ecosystems

Industrial expansion and inadequate environmental safety measures are major contributors to environmental contamination, with heavy metals (HMs) and pharmaceutical waste playing crucial roles. Their negative effects are most noticeable in aquatic species and vegetation, where they accumulate in tissues and cause harmful results. Interactions between HMs and pharmaceutical molecules result in the production of metal-drug complexes (MDCs), which have the potential to disturb diverse ecosystems and their interdependence. However, present studies frequently focus on individual pollutants and their effects on specific environmental parameters, leaving out the cumulative effects of pollutants and their processes across several environmental domains. To address this gap, this review emphasizes the environmental sources of HMs, elucidates their emission pathways during anthropogenic activities, investigates the interactions between HMs and pharmaceutical substances, and defines the mechanisms underlying the formation of MDCs across various ecosystems. Furthermore, this review underscores the simultaneous occurrence of HMs and pharmaceutical waste across diverse ecosystems, including the atmosphere, soil, and water resources, and their incorporation into biotic organisms across trophic levels. It is important to note that these complex compounds represent a higher risk than individual contaminants.

Deciphering the core bacterial community structure and function and their response to environmental factors in activated sludge from pharmaceutical wastewater treatment plants

Pharmaceutical wastewater is recognized for its heightened concentrations of organic pollutants, and biological treatment stands out as an effective technology to remove these organic pollution. Therefore, a comprehensive exploration of core bacterial community compositions, functions, and their responses to environmental factors in pharmaceutical wastewater treatment plants (PWWTPs) is important for understanding the removal mechanism of these organic pollutants. This study comprehensively investigated 36 activated sludge (AS) samples from 15 PWWTPs in China. The results revealed that Proteobacteria (45.41%) was the dominant phylum in AS samples, followed by Bacteroidetes (19.54%) and Chloroflexi (4.13%). While the dominant genera were similar in both aerobic and anaerobic treatment processes, their relative abundances exhibited significant variations. Genera like HA73, Kosmotoga, and Desulfovibrio were more abundant during anaerobic treatment, while Rhodoplanes, Bdellovibrio, and Hyphomicrobium dominated during aerobic treatment. 13 and 10 core operational taxonomic units (OTUs) were identified in aerobic and anaerobic sludge, respectively. Further analysis revealed that core OTUs belonging to genera Kosmotoga, Desulfovibrio, Thauera, Hyphomicrobium, and Chelativorans, were associated with key functions, including sulfur metabolism, methane metabolism, amino acid metabolism, carbohydrate metabolism, toluene degradation, and nitrogen metabolism. Furthermore, this study highlighted the crucial roles of environmental factors, such as COD, NH4+-N, SO42-, and TP, in shaping both the structure and core functions of bacterial communities within AS of PWWTPs. Notably, these factors indirectly affect functional attributes by modulating the bacterial community composition and structure in pharmaceutical wastewater. These findings provide valuable insights for optimizing the efficiency of biochemical treatment processes in PWWTPs.

Selective formation of high-valent iron in Fenton-like system for emerging contaminants degradation under near-neutral and high-salt conditions

In view of the near-neutral and high-salt conditions, the Fenton technology with hydroxyl radicals (HO•) as the main reactive species is difficult to satisfy the removal of trace emerging contaminants (ECs) in pharmaceutical sewage. Here, a layered double hydroxide FeZn-LDH was prepared, and the selective formation of ≡Fe(IV)=O in Fenton-like system was accomplished by the chemical environment regulation of the iron sites and the pH control of the microregion. The introduced zinc can increase the length of Fe-O bond in the FeZn-LDH shell layer by 0.22 Å compared to that in Fe2O3, which was conducive to the oxygen transfer process between ≡Fe(III) and H2O2, resulting in the ≡Fe(IV)=O formation. Besides, the amphoteric hydroxide Zn(OH)2 can regulate the pH of the FeZn-LDH surface microregion, maintaining reaction pH at around 6.5-7.5, which could avoid the quenching of ≡Fe(IV)=O by H+. On the other hand, owing to the anti-interference of ≡Fe(IV)=O and the near-zero Zeta potential on the FeZn-LDH surface, the trace ECs can also be effectively degraded under high-salt conditions. Consequently, the process of ≡Fe(IV)=O generation in FeZn-LDH system can satisfy the efficient removal of ECs under near-neutral and high-salt conditions.

Degradation and transformation of carbamazepine in aqueous medium under non-thermal plasma oxidation process

Carbamazepine (CBZ) is a pharmaceutical compound detected in various water resources. With a view to removing this contaminant, the applicability of non-thermal plasma (NTP) oxidation process has been widely tested in recent years. This study utilized NTP from a dielectric barrier discharge reactor in the treatment of CBZ. NTP on the surface of a water sample containing 25 mg.L-1 of CBZ resulted in a removal efficiency of over 90% with an energy yield of 0.19 g. (kWh)-1. On the other hand, a rapid reduction in pH and an increase of conductivity and nitrate/nitrite ions concentration were observed during the degradation. The applied voltage amplitude significantly affected the removal efficiency and the energy yield as the degradation efficiency was 55%, 70%, and 72% respectively with an applied voltage of 8, 10, and 12 kV. The water matrices containing inorganic anions such as chloride and carbonate ions reduced the removal efficiency by scavenging the reactive species. Accordingly, a reduction in the removal efficiency was observed in tap water. The high-resolution mass spectrometry (HRMS) results revealed that both reactive oxygen and nitrogen species take part in the reaction process which yields many intermediate products including aromatic nitro-products. This study concluded that NTP can effectively degrade CBZ in both pure and tap water, but special attention must be paid to changes in the water quality parameters (pH, conductivity, and nitrate/nitrite ions) and the fate of nitro products.

Catalytic Ozonation of Reactive Black 5 in Aqueous Solution Using Iron-Loaded Dead Leaf Ash for Wastewater Remediation

In the current study, iron-loaded dead leaf ash (Fe-DLA) was used as a novel catalyst in the heterogeneous catalytic ozonation process (HCOP) for textile wastewater containing Reactive Black 5 (RB-5). The research demonstrates a significant boost in removal efficiency, reaching 98.76% with 1.0 g/min O3 and 0.5 g/L catalyst dose, by investigating key variables such as pH, ozone and catalyst doses, initial concentration, and the presence of scavengers in 1 L wastewater. The addition of tert-butyl alcohol (TBA) reduced RB-5 elimination, indicating the involvement of OH radicals. Catalyst reusability decreased slightly (2.05% in the second run; 4.35% in the third), which was attributed to iron leaching. A comparison of single ozonation (Fe-DLA) adsorption and catalytic ozonation processes (Fe-DLA/O3) revealed that the combined process improved dye degradation by 25%, with removal rates ranking as Fe-DLA adsorption O3 Fe-DLA/O3, with an impressive 76.44% COD removal. These results strongly support RB-5 removal using Fe-DLA and HCOP at a basic pH, highlighting the catalyst's utility in practical wastewater treatment.

Comparative study of Fe2+/H2O2 and Fe2+/persulfate systems on the pre-treatment process of real pharmaceutical wastewater

Advanced oxidation technologies based on hydroxyl radical (•OH) and sulfate radical (SO4-•) are two common types of advanced oxidation technologies, but there are not many reports on the application of advanced oxidation methods in actual wastewater pretreatment. This article compares the pre-treatment performance of Fe2+/H2O2 and Fe2+/Persulfate systems in actual pharmaceutical wastewater, and combines EEM, GC-MS, and toxicity testing results to explore the differences in TOC, COD, and NH3-N removal rates, optimal catalyst dosage, applicable pH range, toxicity of effluent after reaction, and pollutant structure between the two systems. The results indicate that the Fe2+/H2O2 system has a higher pollutant removal rate (TOC: 71.9%, COD: 66.9%, NH3-N: 34.1%), but also requires a higher catalyst (Fe2+) concentration (6.0 g/L), and its effluent exhibits characteristic peaks of aromatic proteins. The Fe2+/Persulfate system has a wider pH range (pH ≈ 3-7) and is more advantageous in treating wastewater containing more cyclic organic compounds, but the effluent contains some sulfur-containing compounds. In addition, toxicity tests have shown that the toxicity reduction effect of the Fe2+/Persulfate system is stronger than that of the Fe2+/H2O2 system.

A computational investigation of DMSO/water separation through functionalized GO multilayer nanosheet membrane using molecular dynamics simulation and deep neural network model for membrane performance prediction

In this molecular dynamics (MD) simulation study, the separation of dimethyl sulfoxide (DMSO) from water was investigated using multilayer functionalized graphene oxide (GO) membranes. The GO nanosheets were modified with chemical groups (-F, -H) to alter their properties. The study analyzed the influence of pressure and functional groups on the separation rate. Additionally, a deep neural network (DNN) model was developed to predict membrane behavior under different conditions in water treatment processes. Results revealed that the fluorine-functionalized membrane exhibited higher permeation compared to the hydrogen-functionalized one, with potential of mean force (PMF) analysis indicating higher energy barriers for water molecules passing through the hydrogen-functionalized membrane. The study used density profile, water density map analysis, and radial distribution function (RDF) analysis to understand water and DMSO molecule interactions. The diffusion coefficient of water molecules was also calculated, showing higher diffusion in the fluorine-functionalized system. Overall, the findings suggest that functionalized GO membranes are effective for DMSO-water separation, with the fluorine-functionalized membrane showing superior performance. The DNN model accurately predicts membrane behavior, contributing to the optimization of membrane separation systems.

Highly Efficient Photocatalytic Degradation of Organic Pollutants Using a Polyvinylidene Fluoride/Polyvinylpyrrolidone-Cuprous Oxide Composite Membrane

Enhancing the efficiency of photocatalysts in the removal of organic pollutants is of vital importance in wastewater treatment. In this work, a set of composite membranes that can be used for efficient removal of the organic dyes, such as methyl orange (MO), methylene blue (MB), and Congo red (CR), were prepared through coblending/electrospinning techniques using polyvinylidene fluoride (PVDF) as the substrate, polyvinylpyrrolidone (PVP) as the dispersing agent and wettability regulator, and cuprous oxide (Cu2O) as the photocatalyst. The results showed that Cu2O particles were well encapsulated in the electrospun PVDF/PVP fibers, and the composite membranes exhibited apparently enhanced hydrophilicity. Furthermore, compared with the pure Cu2O particles, the composite membranes not only showed a higher photocatalytic degradation ratio for MO (93.6%) but also showed a much higher degradation rate (62.4 mg/(mg·h)) in comparison with the other reported Cu2O-based composite photocatalytic materials in the literature. In addition, the membrane sample also had excellent recycling stability, and the retention rate of its removal ability maintained 92.1% after 5 times of recycling. Furthermore, the composite membranes also showed high removal ability toward MB and CR, with photocatalytic degradation ratios of 81.4 and 76.1%, respectively. This work indicates that the prepared PVDF/PVP-Cu2O composite membranes possess promising application prospects in wastewater treatment.

Pollutant profile complexity governs wastewater removal of recalcitrant pharmaceuticals

Organic pollutants are an increasing threat for wildlife and humans. Managing their removal is however complicated by the difficulties in predicting degradation rates. In this work, we demonstrate that the complexity of the pollutant profile, the set of co-existing contaminants, is a major driver of biodegradation in wastewater. We built representative assemblages out of one to five common pharmaceuticals (caffeine, atenolol, paracetamol, ibuprofen, and enalapril) selected along a gradient of biodegradability. We followed their individual removal by wastewater microbial communities. The presence of multichemical background pollution was essential for the removal of recalcitrant molecules such as ibuprofen. High-order interactions between multiple pollutants drove removal efficiency. We explain these interactions by shifts in the microbiome, with degradable molecules such as paracetamol enriching species and pathways involved in the removal of several organic pollutants. We conclude that pollutants should be treated as part of a complex system, with emerging pollutants potentially showing cascading effects and offering leverage to promote bioremediation.

Voltammetric determination of flufenamic acid and adsorption studies with biochar in the absence / presence of cetyltrimethylammonium bromide

In this article, a novel method for the determination of Flufenamic acid (FFA, pharmaceutical pollutant) is presented based on voltammetric oxidation at a carbon paste electrode (CPE) in-situ modified with cetyltrimethylammonium bromide (CTAB). The experimentally proved "erosion effect" of this surfactant enhanced the sensitivity of detection in the SWASV mode allowing us to quantify the analyte down to the low nanomolar level (with a LOD of 5.5 × 10-9 mol L-1 FFA). The respective (electro)analytical procedure has been shown to be applicable in monitoring the residua of FFA in model aqueous solutions simulating polluted and then purified industrial wastewater. Furthermore, the process of removal of FFA via adsorption onto selected carbonaceous materials was studied in detail, when two conventional active carbon adsorbents were compared with biochar (BC) - a cheaper alternative. It has been found that although the latter as such does not attain the adsorption capacities of both active carbons, in-situ modification of BC with CTAB enhances its adsorption capacity up to 40% (from 125 mg g-1 to ca. 175 mg g-1), as well as fastens the adsorption process (3x); both under conditions of testing. When considering the final procedure for removal of residual pollutant from model water samples with BC and the method of choice for quantification of the corresponding change(s) of FFA before and after purification, the principal role of CTAB has been revealed and defined. Namely, the functioning of CTAB had, in fact, double benefit: (i) enhancement of adsorptive capabilities of the BC adsorbent and (ii) improved sensitivity of the voltammetric detection with in-situ modified CPE.

A review of antibiotics in surface water and their removal by advanced electrocoagulation technologies

The overuse and misuse of antibiotics have posed a serious threat to environment and human health, and even given rise to antibiotic resistance genes (ARGs). Antibiotics are ubiquitous in surface water worldwide with concentrations ranging from ng/L to μg/L level, being widely detected in rivers, lakes, seawater, and even drinking water. To address this thorny issue, numerous advanced technologies have been implemented to remove antibiotics. Advanced electrocoagulation (AEC) technologies, known as the combination of EC and other technologies capable of generating •OH in situ, have garnered considerable attention owing to their advances and high efficiency. This critical review investigated >120 relevant publications from the last few years (2017-2023) for the global distribution of commonly used antibiotics in surface water and their removal by various AEC technologies. Significant AEC technologies, such as combined electro-Fenton and EC (EF-EC) and combined electro-oxidation and EC (EO-EC), were reviewed. Their mechanism and characteristics were detailed. The major research results on removing antibiotics or the application potentials were elaborately described and discussed. Finally, the application trends of AEC technologies, as well as the challenges that may arise were prospected. The recommendations for controlling global antibiotic contamination in surface water were shared.

UV/persulfate processes for the removal of total organic carbon from coagulation-treated industrial wastewaters

Sulfate radical-based oxidation processes were investigated to understand the relationship between persulfate (PS) consumption and total organic carbon (TOC) removal from industrial wastewater under various PS concentrations. First, the degradation and mineralization of Bisphenol A (BPA) (initial concentration: 11 mg/L) were investigated in ultraviolet (UV)/PS systems. Complete degradation was achieved within 30 min of UV irradiation, and 41%-72% TOC removal was achieved at PS concentrations of 200 and 400 mg/L. The consumed concentration of S2O82- and generated concentration of SO42- increased gradually to similar levels. The ratio of the PS consumption to TOC removal based on the mass concentration (mg/L) was 14.5 and 23.2 at 180 min for 200 and 400 mg/L of S2O82-, respectively. Three types of coagulation-treated industrial wastewater from metal-processing, food-processing, and adhesive-producing plants were obtained, and TOC removal was analyzed using the same UV/PS systems (initial TOC concentration: 100 mg/L). The TOC removal rates ranged from 16.9% to 94.4% after 180 min of UV irradiation at PS concentrations of 1,000, 2,000, 4,000, and 8,000 mg S2O82-/L. Despite the higher TOC removal at higher PS concentrations, the PS activation efficiency decreased significantly as the PS concentration increased. Only approximately 30%-40% activation efficiency was achieved at a PS concentration of 8,000 mg/L. In this study, the ratio of PS consumption to TOC removal ranged from 20.6 to 43.9.

FeSO4·7H2O optimisation of earthed atomising corona discharge (Fe-EACD) a process for the pharmaceutical wastewater treatment

Pharmaceutical residues can cause serious water pollution problems, harm human health and destroy the ecological balance. FeSO4·7H2O optimisation of the earthed atomising corona discharge (Fe-EACD) process was used to dispose of pharmaceutical wastewater in this research. Experiments were analyzed by VI characteristic curves to optimise the electrode distance (20-50 mm) and wire electrode diameter (0.3-0.5 mm). The effects of discharging voltage (7-12 kV), time (0-54 min) and FeSO4 dosage (0.2-1.2 g/L) were investigated using the response surface methodology (RSM). According to the RSM results, the best removal efficiency of COD (89.6%) was detected at the optimal discharging voltage of 12 kV, time of 42 min and Fe2+ concentration of 0.4 g/L. The Fe-EACD process could work efficiently with BOD5/COD ratio moving to 0.49 in an acid environment. The kinetic analysis and mechanism study suggested that the Fe-EACD process was demonstrated well by the pseudo-first-order based on the correlation coefficient (R2). Active •OH producing in the EACD process is responsible for the COD removal and the FeSO4·7H2O as a catalyst can promote the formation of active hydroxyl. In other words, EACD with Fe2+ optimisation was an economic and feasible process for pharmaceutical wastewater treatment.

SUNLIGHT-INDUCED decontamination of water from emerging pharmaceutical pollutants using ZnO nanoparticles

A new class of environmental pollutants that have become a significant concern for the entire world's population over the last few decades are pharmaceutical contaminants due to the potential risks they pose to the environment and human health. An investigation on the photocatalytic degradation of four different model pharmaceutical contaminants: Tetracycline (TCT), Sulfamethoxazole (SMX), Chloroquine (CLQ), and Diclofenac (DCF) has been carried out using ZnO nanoparticles as the photocatalyst, and sunlight as the source of energy in a batch photocatalytic reactor. This process resulted in the degradation of about 51% for TCT, 65% for SMX, 61% for CLQ, and 55% for DCF within 30 min of solar irradiation. Complete degradation and COD reduction were achieved after a prolonged irradiation. The slow decay is attributed to the evolution of the intermediate compounds, which were identified using the liquid chromatography quadrupole time-of-flight mass spectrometry (LC-Q-TOF-MS) method. The possible intermediates formed were identified for each molecule (i.e., TCT having 6 products, SMX, having 4 products, DCF having 8 products and CLQ having 8 products), and the mechanism for each pollutant is proposed. The effect on distinct operational parameters, like catalyst loading, and pH, environmentally relevant parameters such as ionic effect, and multiple contaminants system were investigated. It was found that the anions such as Cl-, SO42-, CO32-, HCO3-, NO3-, F-, Br-, and I-both individually as well as in combination had no effect on the degradation except for SMX. For multiple component systems, when two pollutants are mixed, each pollutant affects the degradation of the other and in the case of CLQ/TCT system, CLQ inhibits the degradation of TCT drastically. The study demonstrates that ZnO is an effective and convenient option for photocatalytic decontamination of water sources contaminated with a variety of pharmaceutical contaminants.

Preparation and evaluation of a coated smectite clay-based material modified with epichlorohydrin-dimethylamine for the diclofenac removal

This study reports the analysis of diclofenac removal from aqueous solution using a novel adsorbent coating with amphoteric surface. This adsorbent coating was improved using a new amphoteric ratio to increase its performance for the removal of pharmaceuticals such as diclofenac. The adsorbent coating was formulated using acrylic polymer emulsion, smectite-based clay powder and epichlorohydrin-dimethylamine to obtain a layer form via the implementation of a facile synthesis method. In a previous study, this adsorbent coating was successful to remove cationic and anionic dyes. Therefore, this research aimed to further investigate and test its application in the removal of other emerging water pollutants like pharmaceuticals. SEM, EDX, and FTIR analyses were carried out for the characterization of this novel adsorbent. The effects of adsorbent composition, diclofenac concentration, temperature, and solution pH were studied and modeled. The best conditions to improve the diclofenac adsorption was 303 K and pH 3 where the adsorption capacity was 25.59 mg/g. Adsorption isotherms and kinetics were quantified and modeled, and the corresponding adsorption mechanism was also analyzed. Diclofenac adsorption with this novel material was exothermic and spontaneous. This alternative adsorbent is promising for diclofenac removal from industrial wastewater systems.

Comprehensive technological assessment for different treatment methods of leather tannery wastewater

The leather-making process necessitates large amounts of water and consequently generates tons of liquid waste as leather tannery wastewater (TWW) is disposed of directly in the open environment. Open disposal of untreated TWW into the natural environment causes an accumulation of various polluting compounds, including heavy metals, dyes, suspended solids inorganic matter, biocides, oils, tannins, and other toxic chemicals. It thus poses potential hazards to the environment and human health. This study primarily focuses on providing in-depth insight into the characteristics, treatment strategies, and regulatory frameworks for managing TWW in leather processing industries. Different technologies of conventional physico-chemical (equalization, coagulation, and adsorption), advanced approaches (Fenton oxidation, ozonation, cavitation), thermo-catalytic and biological treatments available to treat TWW, and their integrative approaches were also highlighted. This review also sheds light on the most frequently applied technologies to reduce contaminant load from TWW though there are several limitations associated with it such as being ineffective for large quantities of TWW, waste generation during treatment, and high operational and maintenance (O&M) costs. It is concluded that the sustainable alternatives applied in the current TWW technologies can minimize O&M costs and recirculate the treated water in the environment. The exhaustive observations and recommendations presented in this article are helpful in the industry to manage TWW and recirculate the water in a sustainable manner.

Recent advances in microbial engineering approaches for wastewater treatment: a review

In the present era of global climate change, the scarcity of potable water is increasing both due to natural and anthropogenic causes. Water is the elixir of life, and its usage has risen significantly due to escalating economic activities, widespread urbanization, and industrialization. The increasing water scarcity and rising contamination have compelled, scientists and researchers, to adopt feasible and sustainable wastewater treatment methods in meeting the growing demand for freshwater. Presently, various waste treatment technologies are adopted across the globe, such as physical, chemical, and biological treatment processes. There is a need to replace these technologies with sustainable and green technology that encourages the use of microorganisms since they have proven to be more effective in water treatment processes. The present review article is focused on demonstrating how effectively various microbes can be used in wastewater treatment to achieve environmental sustainability and economic feasibility. The microbial consortium used for water treatment offers many advantages over pure culture. There is an urgent need to develop hybrid treatment technology for the effective remediation of various organic and inorganic pollutants from wastewater.

Linking the shifts in the metabolically active microbiota in a UASB and hybrid anaerobic-aerobic bioreactor for swine wastewater treatment

Due to the high concentration of pollutants, swine wastewater needs to be treated prior to disposal. The combination of anaerobic and aerobic technologies in one hybrid system allows to obtain higher removal efficiencies compared to those achieved via conventional biological treatment, and the performance of a hybrid system depends on the microbial community in the bioreactor. Here, we evaluated the community assembly of an anaerobic-aerobic hybrid reactor for swine wastewater treatment. Sequencing of partial 16S rRNA coding genes was performed using Illumina from DNA and retrotranscribed RNA templates (cDNA) extracted from samples from both sections of the hybrid system and from a UASB bioreactor fed with the same swine wastewater influent. Proteobacteria and Firmicutes were the dominant phyla and play a key role in anaerobic fermentation, followed by Methanosaeta and Methanobacterium. Several differences were found in the relative abundances of some genera between the DNA and cDNA samples, indicating an increase in the diversity of the metabolically active community, highlighting Chlorobaculum, Cladimonas, Turicibacter and Clostridium senso stricto. Nitrifying bacteria were more abundant in the hybrid bioreactor. Beta diversity analysis revealed that the microbial community structure significantly differed among the samples (p < 0.05) and between both anaerobic treatments. The main predicted metabolic pathways were the biosynthesis of amino acids and the formation of antibiotics. Also, the metabolism of C5-branched dibasic acid, Vit B5 and CoA, exhibited an important relationship with the main nitrogen-removing microorganisms. The anaerobic-aerobic hybrid bioreactor showed a higher ammonia removal rate compared to the conventional UASB system. However, further research and adjustments are needed to completely remove nitrogen from wastewater.

Electrochemical oxidation technique to pharmaceutical pollutants removal

Human progress in medical science and drug production has improved the growth process and increased human lifespan. Most of the drugs used are to control or prevent common human diseases. These drugs can be produced in different ways such as synthetic, chemical, biological, etc. On the other hand, pharmaceutical companies have a large volume of pharmaceutical effluents and wastewater that enters the environment and harms nature and human life. The main problems of entering the pharmaceutical effluent into the environmental cycle are the creation of drug resistance against the active substance of the drugs and the occurrence of abnormalities in the next generations. Therefore, the process of pharmaceutical wastewater treatment is used to reduce the level of pharmaceutical pollutants in order to enter the pharmaceutical wastewater into the environmental cycle. Until recently, filtration, passing through reverse osmosis and ion exchange resins, cleaning facilities, etc., have been various methods to remove pharmaceutical pollutants. Due to the low efficiency of the usual and old systems, the use of new methods has attracted more attention. In this article, the aim is to investigate the electrochemical oxidation method in order to remove the active ingredient of some commonly used drugs (aspirin, atorvastatin, metformin, metronidazole and ibuprofen) from the wastewater of pharmaceuticals. Therefore, in order to observe the initial conditions of the samples, a cyclic voltammetry diagram with a scanning rate of 100 mV/s has been performed. Next, by using the chronoamperometry process and applying a constant potential, the desired drugs were subjected to the electrochemical process of oxidation. As a result, the re-examined samples were subjected to cyclic voltammetry test to determine the conditions of sample oxidation peaks as well as the removal efficiency of the samples by examining the surface under the initial and final voltammetry graph. The results indicate that this method for removing selected drugs has a high removal efficiency of about 70% and 100% for atorvastatin samples. Therefore, this method is accurate, reproducible (RSD 2%), efficient, easy and economical and can be used in drug manufacturing industries. This method is used in a wide range of drug concentration. This means that by increasing the concentration of the drug, without the need to change the equipment used and the applied potential, by spending more time in the oxidation process, it is possible to remove very high amounts of the drug (more than 1000 ppm).

Water-Floating Hydrogel Polymer Microsphere Composites for Application in Hydrological Mining of Cu(II) Ions

Innovative materials and technologies capable of extraction and recovery of technologically relevant metal ions from various water sources, such as lakes, oceans, ponds, or wastewater reservoirs, are in great demand. Polymer beads are among the most well-known solid-phase adsorbents and ion exchangers employed in metal ion recovery. On the other hand, hydrogels are an emerging platform for producing innovative adsorbents, which are environmentally friendly and biocompatible materials. In this work, we take advantage of both technologies and produce a new type of material by loading nanostructured polymer microsphere adsorbent into a PVA matrix to obtain a hydrogel polymer microsphere (HPM) composite in the form of a block. The main role of the poly(4-vinylpyrridine-co-methacrylic acid) microspheres is to adsorb metal ions, such as Cu(II), from model water samples. The secondary role of these microspheres in the hydrogel is to change the hydrogel morphology by softening it and stabilizing it under a foam-like morphology. The foam-like morphology endows these composites with the capability of floating on water surfaces. In this work, we report, for the first time, an HPM composite capable of floating on water surfaces and extracting Cu(II) ions from model water samples. This could enable more environmentally friendly hydrological mining technologies by simply deploying adsorbents on water surfaces for metal ion extraction and recovery, thus eliminating the need for water pumping and mechanical processing steps.

Advances on sonophotocatalysis as a water and wastewater treatment technique: efficiency, challenges and process optimisation

Due to water shortage and increased water pollution, various methods are being explored to improve water quality by treating contaminants. Sonophotocatalysis is a combination of two individual water treatment processes i.e., photocatalysis and sonocatalysis. With advantages including shorter reaction times and enhanced activity, this technique shows possible futuristic applications as an efficient water treatment technology. Herein, background insight on sonophotocalysis as a water and wastewater treatment technique as well as the general mechanism of activity is explained. The commonly used catalysts for sonophotocatalytic applications as well as their synthesis pathways are also briefly discussed. Additionally, the utilisation of sonophotocatalysis for the disinfection of various microbial species as well as treatment of wastewater pollutants including organic (dyes, pharmaceuticals and pesticides) and inorganic species (heavy metals) is deliberated. This review also gives a critical analysis of the efficiency, enhancement strategies as well as challenges and outlooks in this field. It is thus intended to give insight to researchers in the context of facilitating future developments in the field of water treatment, and advancing sonophotocatalysis towards large-scale implementation and commercialization.

Analyzing microbial communities and their biodegradation of multiple pharmaceuticals in membrane bioreactors

Pharmaceuticals are of concern to our planet and health as they can accumulate in the environment. The impact of these biologically active compounds on ecosystems is hard to predict, and information on their biodegradation is necessary to establish sound risk assessment. Microbial communities are promising candidates for the biodegradation of pharmaceuticals such as ibuprofen, but little is known yet about their degradation capacity of multiple micropollutants at higher concentrations (100 mg/L). In this work, microbial communities were cultivated in lab-scale membrane bioreactors (MBRs) exposed to increasing concentrations of a mixture of six micropollutants (ibuprofen, diclofenac, enalapril, caffeine, atenolol, paracetamol). Key players of biodegradation were identified using a combinatorial approach of 16S rRNA sequencing and analytics. Microbial community structure changed with increasing pharmaceutical intake (from 1 to 100 mg/L) and reached a steady-state during incubation for 7 weeks on 100 mg/L. HPLC analysis revealed a fluctuating but significant degradation (30-100%) of five pollutants (caffeine, paracetamol, ibuprofen, atenolol, enalapril) by an established and stable microbial community mainly composed of Achromobacter, Cupriavidus, Pseudomonas and Leucobacter. By using the microbial community from MBR1 as inoculum for further batch culture experiments on single micropollutants (400 mg/L substrate, respectively), different active microbial consortia were obtained for each single micropollutant. Microbial genera potentially responsible for degradation of the respective micropollutant were identified, i.e. Pseudomonas sp. and Sphingobacterium sp. for ibuprofen, caffeine and paracetamol, Sphingomonas sp. for atenolol and Klebsiella sp. for enalapril. Our study demonstrates the feasibility of cultivating stable microbial communities capable of degrading simultaneously a mixture of highly concentrated pharmaceuticals in lab-scale MBRs and the identification of microbial genera potentially responsible for the degradation of specific pollutants. KEY POINTS: • Multiple pharmaceuticals were removed by stable microbial communities. • Microbial key players of five main pharmaceuticals were identified.

Enhancement of energy recovery from caffeine wastewater in constructed wetland-microbial fuel cell through operating conditions

The enhancement of up-flow constructed wetland-microbial fuel cell (UFCW-MFC) performance in energy retrieval from caffeine containing wastewater has been explored via various operating conditions (hydraulic retention time (HRT), multianode (MA), multicathode current collector (MC), external resistance). The anaerobic decaffeination and COD removal improved by 37 and 12% as the HRT extended from 1 to 5 d. The increment in contact time between the microbes and organic substrates promoted the degradation and contributed to higher power output (3.4-fold), CE (eightfold), and NER (14-16-fold). The MA and MC connections facilitated the electron transfer rate and the degradation rate of organic substrates in the multiple anodic zones, which enhanced the removal efficiency in the anaerobic compartment (Caffeine: 4.2%; COD: 7.4%) and led to higher electricity generation (Power: 4.7-fold) and energy recovery (CE: 1.4-fold; NER: 2.3-2.5-fold) compared to SA. The lower external resistance favored the growth of electrogens and induced higher electron flux, where the best treatment performance and electricity production was obtained when the external resistance approached the internal resistance. Overall, it was noteworthy that the optimum operating conditions were achieved with 5 d HRT, MA, and MC connection along with external resistance of 200 Ω, which significantly outperformed the initial conditions (1 d HRT, SA connection, and 1000 Ω) by 43.7 and 29.8% of caffeine and COD removal in the anaerobic compartment, respectively as well as 14-fold of power generation.

Ligninolytic enzyme activity and removal efficiency of pharmaceuticals in a water matrix by fungus Rhizopus sp. Isolated from cassava

Residual amounts of pharmaceutical compounds (PhCs) and by-products are continually released into surface water with effluents from conventional wastewater treatment plants (WWTPs). This study evaluated the ability of fungal isolate to remove selected PhCs [carbamazepine (CBZ), diclofenac (DCF) and ibuprofen (IBP)] from wastewater. The fungus used was Rhizopus sp. which was isolated from tuberous roots of cassava (Manihot esculenta). The isolate exhibited an important removal efficiency up to 100% and this was linked to ligninolytic enzymatic activity for lignin peroxidase (15.29 ± 2.69U/L) and manganese peroxidase (85.22 ± 4.26U/L), except laccase. This activity was optimum on day 9 of treatment. PhC metabolites were identified during the experiment revealing the existence of a biotransformation process catalysed by the isolated fungus. The disappearance of PhCs was attributed to their biosorption and biotransformation. However, it was not possible to establish a relationship between the ligninolytic enzymatic activity and the removal efficiency, which leads to the conclusion that there are other fungal metabolites which also play an important role in the biotransformation and biodegradation of the selected PhCs.

The use of agro-waste-based adsorbents as sustainable, renewable, and low-cost alternatives for the removal of ibuprofen and carbamazepine from water

The occurrence of residual pharmaceuticals in the aquatic environment poses major toxicological impacts and adds to the increasing pressure on water resources. Many countries are already suffering from water scarcity, and with the burdening costs of water and wastewater treatment, the race towards innovative sustainable strategies for pharmaceutical remediation is ongoing. Out of the available treatment methods, adsorption proved to be a promising, environmentally friendly technique, particularly when efficient waste-based adsorbents are produced from agricultural residues, thus maximizing the value of wastes, minimizing production costs, and saving natural resources from depletion. Among the residual pharmaceuticals, ibuprofen and carbamazepine are heavily consumed and highly occurring in the environment. This paper aims to review the most recent literature on the application of agro-waste-based adsorbents as sustainable alternatives for the removal of ibuprofen and carbamazepine from contaminated waters. Highlights on the major mechanisms implicated in the adsorption of ibuprofen and carbamazepine are presented, and light is shed on multiple operational parameters that hold a key role in the adsorption process. This review also highlights the effects of different production parameters on adsorption efficiency and discusses many limitations currently encountered. Finally, an analysis is included to compare the efficiency of agro-waste-based adsorbents relative to other green and synthetic adsorbents.

The impact of pharmaceutical pollutants on daphnids - A metabolomic approach

Pharmaceuticals have been classified as emerging contaminants in the aquatic ecosystem, mainly due to their increased use and improper disposal. A significant range of pharmaceutical compounds and their metabolites have been globally detected in surface waters and pose detrimental effects to non-target organisms. Monitoring pharmaceutical water pollution relies on the analytical approaches for their detection, however, such approaches are limited by their sensitivity limit and coverage of the wide range pharmaceutical compounds. This lack of realism in risk assessment is bypassed with effect-based methods, which are complemented by chemical screening and impact modelling, and are able to provide mechanistic insight for pollution. Focusing on the freshwater ecosystem, in this study we evaluated the acute effects on daphnids for three distinct groups of pharmaceuticals; antibiotics, estrogens, and a range of commonly encountered environmentally relevant pharmaceutical pollutants. Combining several endpoints such as mortality, biochemical (enzyme activities) and holistic (metabolomics) we discovered distinct patterns in biological responses. In this study, changes in enzymes of metabolism e.g. phosphatases and lipase, as well as the detoxification enzyme, glutathione-S-transferase, were recorded following acute exposure to the selected pharmaceuticals. A targeted analysis of the hydrophilic profile of daphnids revealed mainly the up-regulation of metabolites following metformin, gabapentin, amoxicillin, trimethoprim and β-estradiol. Whereas gemfibrozil, sulfamethoxazole and oestrone exposure resulted in the down-regulation of majority of metabolites.

A robust multi-residue method for the monitoring of 25 endocrine disruptors at ultra-trace levels in surface waters by SPE-LC-MS/MS

Estrogenic endocrine disruptors are one of the biggest ecotoxicological threats in water that pose a significant ecological burden and health-risk for humans due to their high biological activity and proven additive effects. Therefore, we have developed and validated the most comprehensive and ultra-sensitive analytical method published to date, for reliable quantification of 25 high-risk endocrine disruptors at their ecologically relevant concentrations: naturally excreted hormones (estradiol, estrone, estriol, testosterone, corticosterone, and progesterone), synthetic hormones used for contraception and menopausal symptoms (ethinylestradiol, drospirenone, chlormadinone acetate, norgestrel, gestodene, tibolone, norethindrone, dienogest, and cyproterone) and bisphenols (BPS, BPA, BPF, BPE, BPAF, BPB, BPC, and BPZ). It is based on a solid-phase extraction of water samples, followed by a robust dansyl chloride derivatization with detection by liquid chromatography-tandem mass spectrometry with a single sample preparation and two analytical methods using the same analytical column and mobile phases. The achieved limits of quantitation are in the sub-ng L^-1 range, and detection limits as low as 0.02 ng L^-1, meeting the newest proposal for environmental quality standards (EQS) by the EU water framework directive for estradiol and ethinylestradiol. The method was extensively validated and applied to seven representative Slovenian water samples, where we detected 21 out of 25 analytes; 13 were quantified in at least one sample. Estrone and progesterone were quantified in all samples, reaching levels up to 50 ng L^-1; ethinylestradiol was higher than the current EQS (0.035 ng L^-1) in three samples, and estradiol was above its EQS (0.4 ng L^-1) in one sample, proving the method's applicability and the necessity for monitoring these pollutants.

Degradation of antibiotic amoxicillin from pharmaceutical industry wastewater into a continuous flow reactor using supercritical water gasification

In recent years the concern with emerging pollutants in water has become more prominent, especially pharmaceutical residues, such as antibiotics due to the influence to increase antibacterial resistance. Further, conventional wastewater treatment methods have not demonstrated efficiency for the complete degradation of these compounds, or they have limitations to treat a large volume of waste. In this sense, this study aims to investigate the degradation of amoxicillin, one of the most prescribed antibiotics, in wastewater via supercritical water gasification (SCWG) using a continuous flow reactor. For this purpose, the process operating conditions of temperature, feed flow rate, and concentration of H₂O₂ was evaluated using Experimental Design and Response Surface Methodology techniques and optimized by Differential Evolution methodology. Total organic carbon (TOC) removal, chemical oxygen demand (COD) degradability, reaction time, amoxicillin degradation rate, toxicity of degradation by-products, and gaseous products were evaluated. The use of SCWG for treatment achieved 78.4% of the TOC removal for the industrial wastewater. In the gaseous products, hydrogen was the majority component. Furthermore, high-performance liquid chromatography analyses demonstrated that the antibiotic amoxicillin was degraded. For a mass flow rate of 15 mg/min of amoxicillin fed into the reaction system, 14.4 mg/min was degraded. Toxicity tests with microcrustacean Artemia salina showed slight toxicity to treated wastewater. Despite that, the outcomes reveal the SCWG has great potential to degrade amoxicillin and may be applied to treat several pharmaceutical pollutants. Aside from this, carbon-rich effluents may lead to a significant energy gaseous product, especially, hydrogen and syngas.

Simultaneous hydrodynamic cavitation and glow plasma discharge for the degradation of metronidazole in drinking water

In this study, a novel hydrodynamic cavitation unit combined with a glow plasma discharge system (HC-GPD) was proposed for the degradation of pharmaceutical compounds in drinking water. Metronidazole (MNZ), a commonly used broad-spectrum antibiotic, was selected to demonstrate the potential of the proposed system. Cavitation bubbles generated by hydrodynamic cavitation (HC) can provide a pathway for charge conduction during glow plasma discharge (GPD). The synergistic effect between HC and GPD promotes the production of hydroxyl radicals, emission of UV light, and shock waves for MNZ degradation. Sonochemical dosimetry provided information on the enhanced formation of hydroxyl radicals during glow plasma discharge compared to hydrodynamic cavitation alone. Experimental results showed a MNZ degradation of 14% in 15 min for the HC alone (solution initially containing 300 × 10-6 mol L-1 MNZ). In experiments with the HC-GPD system, MNZ degradation of 90% in 15 min was detected. No significant differences were observed in MNZ degradation in acidic and alkaline solutions. MNZ degradation was also studied in the presence of inorganic anions. Experimental results showed that the system is suitable for the treatment of solutions with conductivity up to 1500 × 10-6 S cm-1. The results of sonochemical dosimetry showed the formation of oxidant species of 0.15 × 10-3 mol H2O2 L-1 in the HC system after 15 min. For the HC-GPD system, the concentration of oxidant species after 15 min reached 13 × 10-3 molH2O2L-1. Based on these results, the potential of combining HC and GPD systems for water treatment was demonstrated. The present work provided useful information on the synergistic effect between hydrodynamic cavitation and glow plasma discharge and their application for the degradation of antibiotics in drinking water.

A Thorough Examination of the Solution Conditions and the Use of Carbon Nanoparticles Made from Commercial Mesquite Charcoal as a Successful Sorbent for Water Remediation

Water pollution has invaded seas, rivers, and tap water worldwide. This work employed commercial Mesquite charcoal as a low-cost precursor for fabricating Mesquite carbon nanoparticles (MUCNPs) using a ball-milling process. The scanning electron energy-dispersive microscopy results for MUCNPs revealed a particle size range of 52.4-75.0 nm. The particles were composed mainly of carbon with trace amounts of aluminum, potassium, calcium, titanium, and zinc. The X-ray diffraction peaks at 26.76 and 43.28 2θ° ascribed to the (002) and (100) planes indicated a crystalized graphite phase. Furthermore, the lack of FT-IR vibrations above 3000 cm^-1 showed that the MUCNPs were not functionalized. The MUCNPs' pore diameter, volume, and surface area were 114.5 Ǻ, 0.363 cm³ g^-1, and 113.45 m² g^-1. The batch technique was utilized to investigate MUCNPs' effectiveness in removing chlorohexidine gluconate (CHDNG) from water, which took 90 min to achieve equilibrium and had an adsorption capacity of 65.8 mg g^-1. The adsorption of CHDNG followed pseudo-second-order kinetics, with the rate-limiting step being diffusion in the liquid film. The Langmuir isotherm dominated the CHDNG adsorption on the MUCNPs with a correlation coefficient of 0.99. The thermodynamic studies revealed that CHDNG adsorption onto the MUCNPs was exothermic and favorable, and its spontaneity increased inversely with CHDNG concentration. The ball-milling-made MUCNPs demonstrated consistent efficiency through regeneration-reuse cycles.

Advances in Ultra-High-Resolution Mass Spectrometry for Pharmaceutical Analysis

Pharmaceutical analysis refers to an area of analytical chemistry that deals with active compounds either by themselves (drug substance) or when formulated with excipients (drug product). In a less simplistic way, it can be defined as a complex science involving various disciplines, e.g., drug development, pharmacokinetics, drug metabolism, tissue distribution studies, and environmental contamination analyses. As such, the pharmaceutical analysis covers drug development to its impact on health and the environment. Moreover, due to the need for safe and effective medications, the pharmaceutical industry is one of the most heavily regulated sectors of the global economy. For this reason, powerful analytical instrumentation and efficient methods are required. In the last decades, mass spectrometry has been increasingly used in pharmaceutical analysis both for research aims and routine quality controls. Among different instrumental setups, ultra-high-resolution mass spectrometry with Fourier transform instruments, i.e., Fourier transform ion cyclotron resonance (FTICR) and Orbitrap, gives access to valuable molecular information for pharmaceutical analysis. In fact, thanks to their high resolving power, mass accuracy, and dynamic range, reliable molecular formula assignments or trace analysis in complex mixtures can be obtained. This review summarizes the principles of the two main types of Fourier transform mass spectrometers, and it highlights applications, developments, and future perspectives in pharmaceutical analysis.

Molecular Responses of Daphnids to Chronic Exposures to Pharmaceuticals

Pharmaceutical compounds are among several classes of contaminants of emerging concern, such as pesticides, heavy metals and personal care products, all of which are a major concern for aquatic ecosystems. The hazards posed by the presence of pharmaceutical is one which affects both freshwater organisms and human health-via non-target effects and by the contamination of drinking water sources. The molecular and phenotypic alterations of five pharmaceuticals which are commonly present in the aquatic environment were explored in daphnids under chronic exposures. Markers of physiology such as enzyme activities were combined with metabolic perturbations to assess the impact of metformin, diclofenac, gabapentin, carbamazepine and gemfibrozil on daphnids. Enzyme activity of markers of physiology included phosphatases, lipase, peptidase, β-galactosidase, lactate dehydrogenase, glutathione-S-transferase and glutathione reductase activities. Furthermore, targeted LC-MS/MS analysis focusing on glycolysis, the pentose phosphate pathway and the TCA cycle intermediates was performed to assess metabolic alterations. Exposure to pharmaceuticals resulted in the changes in activity for several enzymes of metabolism and the detoxification enzyme glutathione-S-transferase. Metabolic perturbations on key pathways revealed distinct groups and metabolic fingerprints for the different exposures and their mixtures. Chronic exposure to pharmaceuticals at low concentrations revealed significant alterations of metabolic and physiological endpoints.

The Advancement in Membrane Bioreactor (MBR) Technology toward Sustainable Industrial Wastewater Management

The advancement in water treatment technology has revolutionized the progress of membrane bioreactor (MBR) technology in the modern era. The large space requirement, low efficiency, and high cost of the traditional activated sludge process have given the necessary space for the MBR system to come into action. The conventional activated sludge (CAS) process and tertiary filtration can be replaced by immersed and side-stream MBR. This article outlines the historical advancement of the MBR process in the treatment of industrial and municipal wastewaters. The structural features and design parameters of MBR, e.g., membrane surface properties, permeate flux, retention time, pH, alkalinity, temperature, cleaning frequency, etc., highly influence the efficiency of the MBR process. The submerged MBR can handle lower permeate flux (requires less power), whereas the side-stream MBR can handle higher permeate flux (requires more power). However, MBR has some operational issues with conventional water treatment technologies. The quality of sludge, equipment requirements, and fouling are major drawbacks of the MBR process. This review paper also deals with the approach to address these constraints. However, given the energy limitations, climatic changes, and resource depletion, conventional wastewater treatment systems face significant obstacles. When compared with CAS, MBR has better permeate quality, simpler operational management, and a reduced footprint requirement. Thus, for sustainable water treatment, MBR can be an efficient tool.

Vinasse-based biochar magnetic composites: adsorptive removal of tetracycline in aqueous solutions

Highly efficient and cost-effective adsorbents for antibiotic removal are the key to mitigate pollution by industrial wastewaters. Pyrolyzing low-cost winemaking waste into biochar is a promising means for waste biomass utilization. This study assembled vinasse-derived biochar with manganese ferrite into vinasse-manganese ferrite biochar-magnetic composites (V-MFB-MCs) through simultaneous pyrolysis of waste biomass and metal (Mn and Fe) hydroxide precipitates. Batch experiments were conducted to evaluate the kinetics and isotherms of tetracycline (TC) adsorption as well as the influence of pH value, humic acid, and ionic strength. Morphological characterization showed that crystalline MnFe₂O₄ nanoparticles were impregnated within the framework of fabricated V-MFB-MCs. Superior TC adsorption capacity and fast pseudo-second-order kinetics could be achieved by the V-MFB-MCs-800 at pH 3.0. The TC adsorption onto V-MFB-MCs-800 was highly pH-dependent and controlled by the positive influence of ionic strength and humic acid. V-MFB-MCs-800 showed excellent adsorption performance in different natural water. Multiple interaction mechanisms including pore filling effect, π-π stacking interaction, and hydrogen bonding contribute to TC removal by V-MFB-MCs-800, which can be an innovative biowaste-derived material for industrial wastewater treatment.

Functionalized SnO2 nanoparticles with gallic acid via green chemical approach for enhanced photocatalytic degradation of citalopram: synthesis, characterization and application to pharmaceutical wastewater treatment

Eco-friendly stannic oxide nanoparticles functionalized with gallic acid (SnO2/GA NP) were synthesized and employed as a novel photocatalyst for the degradation of citalopram, a commonly prescribed antidepressant drug. SnO2/GA NP were characterized using high-resolution transmission electron microscopy, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller measurements and X-ray diffraction. A validated RP-HPLC assay was developed to monitor citalopram concentration in the presence of its degradation products. Full factorial design (24) was conducted to investigate the effect of irradiation time, pH, SnO2/GA NP loading and initial citalopram concentration on the efficiency of the photodegradation process. Citalopram initial concentration was found to be the most significant parameter followed by irradiation time and pH, respectively. At optimum conditions, 88.43 ± 0.7% degradation of citalopram (25.00 µg/mL) was obtained in 1 h using UV light (1.01 mW/cm2). Citalopram kinetics of degradation followed pseudo-first order rate with Kobs and t0.5 of - 0.037 min-1 and 18.73 min, respectively. The optimized protocol was successfully applied for treatment of water samples collected during different cleaning validation cycles of citalopram production lines. The reusability of SnO2/GA NP was studied for 3 cycles without significant loss in activity. This approach would provide a green and economic alternative for pharmaceutical wastewater treatment of organic pollutants.

Influences of different carbon substrates on the morphologies of carbon/g-C3N4 photocatalytic composites and the purification capacities of different composites in the weak UV underwater environment

In order to explore the influence of various carbon introduction on the morphology and photodegradation performance of C/g-C₃N₄ composites, three kinds of different carbon materials: carbon nanotubes (CNT), graphene (GN) and carbon fibers (CF) were introduced to modify g-C₃N₄, and the morphologies, light absorption capacities and the underwater purifications of the composite photocatalysts were investigated. Results showed that the composites synthesized with different carbon substrates shows great differences in growth morphology. In addition, the introduction of various carbon sources also has a great impact on the physical and chemical properties of the composites. Compared with GN/g-C₃N₄ and CF/g-C₃N₄, CNT/g-C₃N₄ shows strong light absorption ability, especially in long-wavelength region (570-660 nm). To further study the difference of degradation ability of the composites in the underwater environment, the purification performance of modified g-C₃N₄ at different water depths were carried out. The results show that under 40 cm of water, where the light intensity and ultra violet spectral are seriously attenuated, the purification efficiency of CNT/g-C₃N₄ at 40 cm is 3.35 times than that of g-C₃N₄. This work provides insight in the design of highly efficient metal-free photocatalysts for the environmental remediation.

Techniques for remediation of pharmaceutical pollutants using metal organic framework - Review on toxicology, applications, and mechanism

Treatment of recalcitrant and xenobiotic pharmaceutical compounds in polluted waters have gained significant attention of the environmental scientists. Antibiotics are diffused into the environment widely owing to their high usages, very particularly in the last two years due to over consumption during covid 19 pandemic worldwide. Quinolones are very effective antibiotics, but do not get completely metabolized due to which they pose severe health hazards if discharged without proper treatment. The commonly reported treatment methods for quinolones are adsorption and advanced oxidation methods. In both the treatment methods, metal organic frameworks (MOF) have been proved to be promising materials used as stand-alone or combined technique. Many composite MOF materials synthesized from renewable, natural, and harmless materials by eco-friendly techniques have been reported to be effective in the treatment of quinolones. In the present article, special focus is given on the abatement of norfloxacin and ofloxacin contaminated wastewater using MOFs by adsorption, oxidation/ozonation, photocatalytic degradation, electro-fenton methods, etc. However, integration of adsorption with any advanced oxidation methods was found to be best remediation technique. Of various MOFs reported by several researchers, the MIL-101(Cr)-SO₃H composite was able to give 99% removal of norfloxacin by adsorption. The MIL - 88A(Fe) composite and Fe LDH carbon felt cathode were reported to yield 100% degradation of ofloxacin by photo-Fenton and electro-fenton methods respectively. The synthesis methods and mechanism of action of MOFs towards the treatment of norfloxacin and ofloxacin as reported by several investigation reports are also presented.

Polydopamine-mediated modification of ZIF-8 onto magnetic nanoparticles for enhanced tetracycline adsorption from wastewater

Magnetic nanoparticle materials which could be used to remove tetracycline were confined seriously due to their poor stability and unsatisfactory reusability. Here, we facilely prepared novel zeolitic imidazolate framework-8 (ZIF-8) functionalized magnetic nanoparticles (Fe₃O₄@PDA-ZIF-8) adsorbent utilizing polydopamine as a bond to establish a connection between zeolitic imidazolate framework-8 and Fe₃O₄, which could improve the stability of magnetic nanoparticles and enhance the tetracycline adsorption capacity simultaneously. The prepared nanocomposites were characterized and their TC adsorption abilities under various experiment conditions (contact time, TC initial concentration and pH values) were also investigated. Experimental results proved that the prepared adsorbent showed superior TC adsorption capacities (92.01 mg/g at pH = 7). Further, the adsorption mechanisms were comprehensively studied and the prepared adsorbent showed satisfactory stability and reusability during the cycle experiment. Altogether, our findings provided a feasible way to design and construct functional magnetic MOF materials for enhancing tetracycline adsorption from wastewater.

Evaluation of degradation performance toward antiviral drug ribavirin using advanced oxidation process and its relations to ecotoxicity evolution

The rapid spread of coronavirus disease 2019 has increased the consumption of some antiviral drugs, wherein these are discharged into wastewater, posing risks to the ecosystem and human health. Therefore, efforts are being made for the development of advanced oxidation processes (AOPs) to remediate water containing these pharmaceuticals. Here, the toxicity evolution of the antiviral drug ribavirin (RBV) was systematically investigated during its degradation via the UV/TiO₂/H₂O₂ advanced oxidation process. Under optimal conditions, RBV was almost completely eliminated within 20 min, although the mineralization rate was inadequate. Zebrafish embryo testing revealed that the ecotoxicity of the treated RBV solutions increased at some stages and decreased as the reaction time increased, which may be attributed to the formation and decomposition of various transformation products (TPs). Liquid chromatography-mass spectrometry analysis along with density functional theory calculations helped identify possible toxicity increase-causing TPs, and quantitative structure activity relationship prediction revealed that most TPs exhibit higher toxicity than the parent compound. The findings of this study suggest that, in addition to the removal rate of organics, the potential ecotoxicity of treated effluents should also be considered when AOPs are applied in wastewater treatment.

Enhanced Adsorption of Sulfonamides by Attapulgite-Doped Biochar Prepared with Calcination

The extensive use of sulfonamides seriously threatens the safety and stability of the ecological environment. Developing green inexpensive and effective adsorbents is critically needed for the elimination of sulfonamides from wastewater. The non-modified biochar exhibited limited adsorption capacity for sulfonamides. In this study, the attapulgite-doped biochar adsorbent (ATP/BC) was produced from attapulgite and rice straw by calcination. Compared with non-modified biochar, the specific surface area of ATP/BC increased by 73.53−131.26%, and the average pore width of ATP/BC decreased 1.77−3.60 nm. The removal rates of sulfadiazine and sulfamethazine by ATP/BC were 98.63% and 98.24%, respectively, at the mass ratio of ATP to rice straw = 1:10, time = 4 h, dosage = 2 g∙L−1, pH = 5, initial concentration = 1 mg∙L−1, and temperature = 20 °C. A pseudo-second-order kinetic model (R2 = 0.99) and the Freundlich isothermal model (R2 = 0.99) well described the process of sulfonamide adsorption on ATP/BC. Thermodynamic calculations showed that the adsorption behavior of sulfonamides on the ATP/BC was an endothermic (ΔH > 0), random (ΔS > 0), spontaneous reaction (ΔG < 0) that was dominated by chemisorption (−20 kJ∙mol−1 > ΔG). The potential adsorption mechanisms include electrostatic interaction, hydrogen bonding, π−π interaction, and Lewis acid−base interactions. This study provides an optional material to treat sulfonamides in wastewater and groundwater.