Control of photoluminescence properties of CdSe nanocrystals in growth

Heavy-Metal-Free Colloidal Quantum Dots: Progress and Opportunities in Solar Technologies

Colloidal quantum dots (QDs) hold great promise as building blocks in solar technologies owing to their remarkable photostability and adjustable properties through the rationale involving size, atomic composition of core and shell, shapes, and surface states. However, most high-performing QDs in solar conversion contain hazardous metal elements, including Cd and Pb, posing significant environmental risks. Here, a comprehensive review of heavy-metal-free colloidal QDs for solar technologies, including photovoltaic (PV) devices, solar-to-chemical fuel conversion, and luminescent solar concentrators (LSCs), is presented. Emerging synthetic strategies to optimize the optical properties by tuning the energy band structure and manipulating charge dynamics within the QDs and at the QDs/charge acceptors interfaces, are analyzed. A comparative analysis of different synthetic methods is provided, structure-property relationships in these materials are discussed, and they are correlated with the performance of solar devices. This work is concluded with an outlook on challenges and opportunities for future work, including machine learning-based design, sustainable synthesis, and new surface/interface engineering.

Highly Efficient Inverted Light-Emitting Diodes Based on Vertically Aligned CdSe/CdS Nanorod Layers Fabricated by Electrophoretic Deposition

Inverted colloidal-nanocrystal-based LEDs (NC-LEDs) are highly interesting and invaluable for large-scale display technology and flexible electronics. Semiconductor nanorods (NRs), in addition to the tunable wavelengths of the emitted light (achieved, for example, by the variation of the NR diameter or the diameter of core in a core-shell configuration), also exhibit linearly polarized emission, a larger Stokes shift, faster radiative decay, and slower bleaching kinetics than quantum dots (QDs). Despite these advantages, it is difficult to achieve void-free active NR layers using simple spin-coating techniques. Herein, we employ electrophoretic deposition (EPD) to make closely packed, vertically aligned CdSe/CdS core/shell nanorods (NRs) as the emissive layer. Following an inverted architecture, the device fabricated yields an external quantum efficiency (EQE) of 6.3% and a maximum luminance of 4320 cd/m2 at 11 V. This good performance can be attributed to the vertically aligned NR layer, enhancing the charge transport by reducing the resistance of carrier passage, which is supported by our finite element simulations. To the best of our knowledge, this is the first time vertically aligned NR layers made by EPD have been reported for the fabrication of NC-LEDs and the device performance is one of the best for inverted red NR-LEDs. The findings presented in this work bring forth a simple and effective technique for making vertically aligned NRs, and the mechanism behind the NR-LED device with enhanced performance using these NRs is illustrated. This technique may prove useful to the development of a vast class of nanocrystal-based optoelectronics, including solar cells and laser devices.

Enhancing photoluminescence performance of perovskite quantum dots with plasmonic nanoparticles: insights into mechanisms and light-emitting applications

Perovskite quantum dots (QDs) are considered as promising materials for numerous optoelectronic applications due to their narrow emission spectra, high color purity, high photoluminescence quantum yields (PLQYs), and cost-effectiveness. Herein, we synthesized various types of perovskite QDs and incorporated Au nanoparticles (NPs) to systematically investigate the impact of plasmonic effects on the photoluminescence performance of perovskite QDs. The PLQYs of the QDs are enhanced effectively upon the inclusion of Au NPs in the solutions, with an impressive PLQY approaching 99% achieved. The PL measurements reveal that the primary mechanism behind the PL improvement is the accelerated rate of radiative recombination. Furthermore, we integrate perovskite QDs and Au NPs, which function as color conversion layers, with blue light-emitting diodes (LEDs), achieving a remarkable efficiency of 140.6 lm W-1. Additionally, we prepare photopatternable thin films of perovskite QDs using photocrosslinkable polymers as the matrix. Microscale patterning of the thin films is accomplished, indicating that the addition of plasmonic NPs does not adversely affect their photopatternable properties. Overall, our research not only elucidates the underlying mechanisms of plasmonic effects on perovskite QDs but presents a practical method for enhancing their optical performance, paving the way for next-generation optoelectronic applications, including high-definition micro-LED panels.

Enhancement mechanism of quantum yield in core/shell/shell quantum dots of ZnS-AgIn5S8/ZnIn2S4/ZnS

To achieve a high quantum yield (QY) of nanomaterials suitable for optical applications, we improved the optical properties of AgIn5S8 (AIS) quantum dots (QDs) by employing an alloyed-core/inner-shell/outer-shell (ZAIS/ZIS/ZnS) structure. We also investigated the mechanism of optical transitions to clarify the improvement of QYs. In AIS, the low-energy absorption near the band edge region is attributed to the weakly allowed band gap transition, which gains oscillator strength through state intermixing and electron-phonon coupling. The main photoluminescence is also ascribed to the weakly allowed band gap transition with characteristics of self-trapped excitonic emission. With alloying/shelling processes, the weakly allowed transition is enhanced by the evolution of the electronic structures in the alloyed core, which improves the band gap emission. In shelled structures, the nonradiative process is reduced by the reconstructed lattice and passivated surface, ultimately leading to a high QY of 85% in ZAIS/ZIS/ZnS. These findings provide new insights into the optical transitions of AIS because they challenge previous conclusions. In addition, our work elucidates the mechanism behind the enhancement of QY accomplished through alloying/shelling processes, providing strategies to optimize nontoxic QDs for various applications using a green chemistry approach.

Blue-emitting SiO2-coated Si-doped ZnSeS quantum dots conjugated aptamer-molecular beacon as an electrochemical and metal-enhanced fluorescence biosensor for SARS-CoV-2 spike protein

The outbreak of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) which was first reported in early January 2020, continues to devastate the worlds public health system. Herein, we report on the development of a novel metal-enhanced fluorescence (MEF) and electrochemical biosensor for SARS-CoV-2 spike (S) protein. To develop the MEF biosensor, SiO2-coated Si-doped ZnSeS quantum dots (QDs) were newly synthesized and conjugated to an aptamer-molecular beacon (Apta-MB) probe. Thereafter, cationic AuNPs, used as a localised surface plasmon resonance (LSPR) signal amplifier, were self-assembled on the QDs-Apta-MB conjugate to form a QDs-Apta-MB-AuNP probe. To develop the electrochemical biosensor, the QDs-Apta-MB assay was carried out on a carbon nanofiber-modified screen-printed carbon electrode. Cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) were used to characterize the electrode surface whilst spectrophotometric, spectroscopic, fluorescence polarization and electron microscopic techniques were used to characterize the materials. Under optimal experimental conditions, the QDs binding to the Apta-MB, quenched the QDs' fluorescence and with SARS-CoV-2 S protein binding to the Apta-MB, LSPR signal from cationic AuNPs of different sizes and shapes were used to tune the fluorescence signal to obtain enhanced sensitivity. On the other hand, using [Fe(CN)6]/K3-/4- buffered with NaAc-KAc-TrizmaAc-KSCN-Borax as the electrolyte solution, anodic peaks of the QDs from the CV and DPV plots were unravelled. Electrochemical detection of SARS-CoV-2 S protein was accomplished by a systematic increase in the QDs anodic peak current generated from the DPV plots. The limits of detection obtained for the SARS-CoV-2 S protein were 8.9 fg/mL for the QDs-Apta-MB-AuNP MEF probe and ∼0.5 pg/mL for the QDs-Apta-MB electrochemical probe. Detection of SARS-CoV-2 S protein in saliva was demonstrated using the QDs-Apta-MB-AuNP MEF probe.

Non-Blinking Luminescence from Charged Single Graphene Quantum Dots

Photoluminescence blinking behavior from single quantum dots under steady illumination is an important but controversial topic. Its occurrence has impeded the use of single quantum dots in bioimaging. Different mechanisms have been proposed to account for it, although controversial, the most important of which is the non-radiative Auger recombination mechanism whereby photocharging of quantum dots can lead to the blinking phenomenon. Here, the singly charged trion, which maintains photon emission, including radiative recombination and non-radiative Auger recombination, leads to fluorescence non-blinking which is observed in photocharged single graphene quantum dots (GQDs). This phenomenon can be explained in terms of different energy levels in the GQDs, caused by various oxygen-containing functional groups in the single GQDs. The suppressed blinking is due to the filling of trap sites owing to a Coulomb blockade. These results provide a profound understanding of the special optical properties of GQDs, affording a reference for further in-depth research.

Molecularly or atomically precise nanostructures for bio-applications: how far have we come?

A huge variety of nanostructures are promising for biomedical applications, but only a few have been practically applied. Among the various reasons, the limited structural preciseness is a critical one, as it increases the difficulty in product quality control, accurate dosing, and ensuring the repeatability of material performance. Constructing nanoparticles with molecule-like preciseness is becoming a new research field. In this review, we focus on the artificial nanomaterials that can currently be molecularly or atomically precise, including DNA nanostructures, some metallic nanoclusters, dendrimer nanoparticles and carbon nanostructures, describing their syntheses, bio-applications and limitations, in view of up-to-date studies. A perspective on their potential for clinical translation is also given. This review is expected to provide a particular rationale for the future design of nanomedicines.

Energy transfer and charge transfer between semiconducting nanocrystals and transition metal dichalcogenide monolayers

Nowadays, as a result of the emergence of low-dimensional hybrid structures, the scientific community is interested in their interfacial carrier dynamics, including charge transfer and energy transfer. By combining the potential of transition metal dichalcogenides (TMDs) and nanocrystals (NCs) with low-dimensional extension, hybrid structures of semiconducting nanoscale matter can lead to fascinating new technological scenarios. Their characteristics make them intriguing candidates for electronic and optoelectronic devices, like transistors or photodetectors, bringing with them challenges but also opportunities. Here, we will review recent research on the combined TMD/NC hybrid system with an emphasis on two major interaction mechanisms: energy transfer and charge transfer. With a focus on the quantum well nature in these hybrid semiconductors, we will briefly highlight state-of-the-art protocols for their structure formation and discuss the interaction mechanisms of energy versus charge transfer, before concluding with a perspective section that highlights novel types of interactions between NCs and TMDs.

Amplified Spontaneous Emission and Lasing from Zn-Processed AgIn5S8 Core/Shell Quantum Dots

I-III-VI ternary quantum dots (QDs) have emerged as favorable alternatives to the toxic II-VI QDs for optoelectronic and biological applications. However, their use as optical gain media for microlasers is still limited by a low fluorescence efficiency. Here, we demonstrate amplified spontaneous emission (ASE) and lasing from colloidal QDs of Zn-processed AgIn₅S₈ (AIS) for the first time. The passivation treatment on the AIS QDs yields a 3.4-fold enhancement of fluorescence quantum efficiency and a 30% increase in the two-photon absorption cross section. ASE is achieved from the AIS/ZnS core/shell QD films under both one- and two-photon pumping with a threshold fluence of ∼84.5 μJ/cm² and 3.1 mJ/cm², respectively. These thresholds are comparable to the best optical gain performance of Cd based-QDs reported in the literature. Moreover, we demonstrate a facile whispering-gallery-mode microlaser of the core/shell QDs with a lasing threshold of ∼233 μJ/cm². The passivated AIS QDs can be promising optical gain media for photonic applications.

Photoactive p-Type Spinel CuGa2O4 Nanocrystals

Herein we report the synthesis and characterization of spinel copper gallate (CuGa₂O₄) nanocrystals (NCs) with an average size of 3.7 nm via a heat-up colloidal reaction. CuGa₂O₄ NCs have a band gap of ∼2.5 eV and marked p-type character, in agreement with ab initio simulations. These novel NCs are demonstrated to be photoactive, generating a clear and reproducible photocurrent under blue light irradiation when deposited as thin films. Crucially, the ability to adjust the Cu/Ga ratio within the NCs, and the effect of this on the optical and electronic properties of the NCs, was also demonstrated. These results position CuGa₂O₄ NCs as a novel material for optoelectronic applications, including hole transport and light harvesting.

Nanostructured Graphdiyne: Synthesis and Biomedical Applications

Graphdiyne (GDY) is a 2D carbon allotrope that features a one-atom-thick network of sp- and sp2-hybridized carbon atoms with high degrees of π conjugation. Due to its distinct electronic, chemical, mechanical, and magnetic properties, GDY has attracted great attention and shown great potential in various fields, such as catalysis, energy storage, and the environment. Preparation of GDY with various nanostructures, including 0D quantum dots, 1D nanotubes/nanowires/nanoribbons, 2D nanosheets/nanowalls/ordered stripe arrays, and 3D nanospheres, greatly improves its function and has propelled its applications forward. High biocompatibility and stability make GDY a promising candidate for biomedical applications. This review introduces the latest developments in fabrication of GDY-based nanomaterials with various morphologies and summarizes their propective use in the biomedical domain, specifically focusing on their potential advantages and applications for biosensing, cancer diagnosis and therapy, radiation protection, and tissue engineering.

Recent progress and future prospects on halide perovskite nanocrystals for optoelectronics and beyond

As an emerging new class of semiconductor nanomaterials, halide perovskite (ABX3, X = Cl, Br, or I) nanocrystals (NCs) are attracting increasing attention owing to their great potential in optoelectronics and beyond. This field has experienced rapid breakthroughs over the past few years. In this comprehensive review, halide perovskite NCs that are either freestanding or embedded in a matrix (e.g., perovskites, metal-organic frameworks, glass) will be discussed. We will summarize recent progress on the synthesis and post-synthesis methods of halide perovskite NCs. Characterizations of halide perovskite NCs by using a variety of techniques will be present. Tremendous efforts to tailor the optical and electronic properties of halide perovskite NCs in terms of manipulating their size, surface, and component will be highlighted. Physical insights gained on the unique optical and charge-carrier transport properties will be provided. Importantly, the growing potential of halide perovskite NCs for advancing optoelectronic applications and beyond including light-emitting devices (LEDs), solar cells, scintillators and X-ray imaging, lasers, thin-film transistors (TFTs), artificial synapses, and light communication will be extensively discussed, along with prospecting their development in the future.

New Conjugates Based on AIS/ZnS Quantum Dots and Aluminum Phthalocyanine Photosensitizer: Synthesis, Properties and Some Perspectives

Today, fluorescent diagnostics and photodynamic therapy are promising methods for diagnosing and treating oncological diseases. The development of new photosensitizers (PS) is one of the most important tasks to improve the efficiency of both laser-induced diagnostics and therapy. In our study, we conjugated PS with AIS/ZnS triple quantum dots (QDs) to obtain non-aggregated complexes. It was shown that the conjugation of PS with QDs does not change the PS fluorescence lifetime, which is a marker of the preservation of PS photophysical properties. In particular, efficient resonant Förster energy transfer (FRET), from QDs to PS molecules in the conjugate, increases the PS luminescence response. The FRET from QD to PS molecules with different ratios of donor and acceptors are shown. It has been demonstrated that the average efficiency of FRET depends on the ratio of PS and QD and reaches a maximum value of 80% at a ratio of 6 PS molecules per 1 QD molecule. Thus, these studies could help to contribute to the development of new complexes based on QD and PS to improve the efficiency of phototheranostics.

Role of Biogenic Capping Agents in the Synthesis of Metallic Nanoparticles and Evaluation of Their Therapeutic Potential

The biomedical properties of nanoparticles have been the area of focus for contemporary science; however, there are issues concerning their long-term toxicities. Recent trends in nanoparticle fabrication and surface manipulation, the use of distinctive biogenic capping agents, have allowed the preparation of nontoxic, surface-functionalized, and monodispersed nanoparticles for medical applications. These capping agents act as stabilizers or binding molecules that prevent agglomeration and steric hindrance, alter the biological activity and surface chemistry, and stabilize the interaction of nanoparticles within the preparation medium. Explicit features of nanoparticles are majorly ascribed to the capping present on their surface. The present review article is an attempt to compile distinctive biological capping agents deployed in the synthesis of metal nanoparticles along with the medical applications of these capped nanoparticles. First, this innovative review highlights the various biogenic capping agents, including biomolecules and biological extracts of plants and microorganisms. Next, the therapeutic applications of capped nanoparticles and the effect of biomolecules on the efficiency of the nanoparticles have been expounded. Finally, challenges and future directions on the use of biological capping agents have been concluded. The goal of the present review article is to provide a comprehensive report to researchers who are looking for alternative biological capping agents for the green synthesis of important metallic nanoparticles.

Versatile Route for Multifunctional Aerogels Including Flaxseed Mucilage and Nanocrystals

Preparation of low density monolithic and free-standing organic-inorganic hybrid aerogels of various properties is demonstrated using green chemistry from a biosafe natural source (flaxseed mucilage) and freeze-casting and subsequent freeze drying. Bio-aerogels, luminescent aerogels and magneto-responsive aerogels were obtained by combination of the flaxseed mucilage with different types of nanoparticles. Moreover, the aerogels are investigated as possible drug release system using curcumin as a model. Various characterization techniques like thermogravimetric analysis, nitrogen physisorption, electron microscopy, UV/Vis absorption and emission spectroscopy, bulk density and mechanical measurements as well as in vitro release profile measurements are employed to investigate the obtained materials. The flaxseed-inspired organic-inorganic hybrid aerogels exhibit ultra-low densities of as low as 5.6 mg/cm³ for 0.5% (w/v) mucilage polymer, a specific surface area of 4 to 20 m² /g, high oil absorption capacity (23 g/g) and prominent compressibility. The natural biopolymer technique leads to low cost and biocompatible functional lightweight materials with tunable properties (physicochemical and mechanical) and significant potential for applications as supporting or stimuli responsive materials, carriers, reactors, microwave, and electromagnetic radiation protective (absorbing) material as well as in drug delivery and oil absorption. This article is protected by copyright. All rights reserved.

Rational Design of Surface-State Controlled Multicolor Cross-Linked Carbon Dots with Distinct Photoluminescence and Cellular Uptake Properties

We disclose for the first time a facile synthetic methodology for the preparation of multicolor carbon dots (CDs) from a single source barring any chromatographic separations. This was achieved via sequential intraparticle cross-linking of surface abundant carboxylic acid groups on the CDs synthesized from a precursor to control their photoluminescence (PL) spectra as well as affect their degree of cellular internalization in cancer cells. The change in PL spectra with sequential cross-linking was projected by theoretical density functional theory (DFT) studies and validated by multiple characterization tools such as X-ray photoelectron spectroscopy (XPS), PL spectroscopy, ninhydrin assay, etc. The variation in cellular internalization of these cross-linked CDs was demonstrated using inhibitor assays, confocal microscopy, and flow cytometry. We supplemented our findings with high-resolution dark-field imaging to visualize and confirm the colocalization of these CDs into distinct intracellular compartments. Finally, to prove the surface-state controlled PL mechanisms of these cross-linked CDs, we fabricated a triple-channel sensor array for the identification of different analytes including metal ions and biologically relevant proteins.

Positive Sorption Behaviors in the Ligand Exchanges for Water-Soluble Quantum Dots and a Strategy for Specific Targeting

N,N,N',N'-Tetramethylethylenediamine (TMEDA) and ethylenediamine (EDA) were investigated in-depth in the ligand exchanges for water-soluble CdSe quantum dots (QDs). TMEDA could assist the phase transfer of QDs from apolar solvents to the aqueous solutions as stabilized by mercaptopropionic acid (MPA). We successfully maintained the stability of a series of MPA-capped QDs of different ligand densities for NMR characterizations in aqueous solutions. The proton NMR spectroscopies of MPA of the binding state were used to analyze the ligand densities on the surface of QDs, which were not explored in the past. The binding thermodynamics of the surface ligands of QDs, as analyzed using the Hill equation, demonstrated a positive promoting effect and possible interactions between ligands. EDA in the purification process underwent a spontaneous adsorption with two-stage thermodynamic behaviors as characterized by isothermal titration calorimetry. Due to the positive role of the already adsorbed ligands, excess EDA would further attach to the surface of QDs in the form of non-bonded physisorption, greatly improving the quantum yield (QY) of QDs, and the ligand of this part would almost not change the stability of QDs. We proposed a strategy for the preparation of aqueous QDs with a high QY, followed by fluorescence quenching-enhancement cycles caused by purification-adsorption operations. The strategy made it possible for the preparation of functional QDs with small molecules after purification operations. Kinetics of the sorption of ligands on the surface of QDs were determined by fluorescence spectroscopy. Modified pseudo-second-order kinetics after consideration of the ligand-ligand interaction effect could well analyze the kinetic data. This kinetic model had advantages over the previous ligand exchange model in terms of accuracy, reproducibility, and physical significance. Finally, we used the above strategy for the design of fluorescent QDs for bioimaging of lysosomes, mitochondria, and cancer cells. This work can simplify the preparation of multifunctional fluorescent QDs and avoid complicated ligand design.

Silver-Doped Cadmium Selenide/Graphene Oxide-Filled Cellulose Acetate Nanocomposites for Photocatalytic Degradation of Malachite Green toward Wastewater Treatment

Silver-doped cadmium selenide/graphene oxide (GO) (Ag-CdSe/GO) nanocomposites have been synthesized, loaded in cellulose acetate (CA) to form Ag-CdSe/GO@CA heterostructure nanofibers, and characterized in terms of structural, morphological, photocatalytic properties, among others. The photocatalytic degradation of malachite green (MG) was estimated using cadmium selenide-filled CA (CdSe@CA), silver-doped cadmium selenide-filled CA (Ag-CdSe@CA), cadmium selenide/GO-filled CA (CdSe/GO@CA), and silver-doped cadmium selenide/GO-filled CA (Ag-CdSe/GO@CA) nanocomposite materials. The Ag-CdSe/GO@CA nanocomposites exhibit and retain an enhanced photocatalytic activity for the degradation of MG dye. This amended performance is associated with the multifunctional supporting impacts of GO, Ag, and CA on the composite structure and properties. The superior photocatalytic activity is related to the fact that both Ag and GO can act as electron acceptors that boost the separation efficiency of photogenerated carriers and the loading of the combined nanocomposite (Ag-CdSe@GO) on CA nanofibers, which can augment the adsorption of electrons and holes and facilitate the movement of carriers. The stability of Ag-CdSe/GO@CA nanocomposite photocatalysts demonstrates suitable results even after five recycles. This study establishes an advanced semiconductor-based hybrid nanocomposite material for efficient photocatalytic degradation of organic dyes.

Synthesis of Group II-VI Semiconductor Nanocrystals via Phosphine Free Method and Their Application in Solution Processed Photovoltaic Devices

Solution-processed CdTe semiconductor nanocrystals (NCs) have exhibited astonishing potential in fabricating low-cost, low materials consumption and highly efficient photovoltaic devices. However, most of the conventional CdTe NCs reported are synthesized through high temperature microemulsion method with high toxic trioctylphosphine tellurite (TOP-Te) or tributylphosphine tellurite (TBP-Te) as tellurium precursor. These hazardous substances used in the fabrication process of CdTe NCs are drawing them back from further application. Herein, we report a phosphine-free method for synthesizing group II-VI semiconductor NCs with alkyl amine and alkyl acid as ligands. Based on various characterizations like UV-vis absorption (UV), transmission electron microscope (TEM), and X-ray diffraction (XRD), among others, the properties of the as-synthesized CdS, CdSe, and CdTe NCs are determined. High-quality semiconductor NCs with easily controlled size and morphology could be fabricated through this phosphine-free method. To further investigate its potential to industrial application, NCs solar cells with device configuration of ITO/ZnO/CdSe/CdTe/Au and ITO/ZnO/CdS/CdTe/Au are fabricated based on NCs synthesized by this method. By optimizing the device fabrication conditions, the champion device exhibited power conversion efficiency (PCE) of 2.28%. This research paves the way for industrial production of low-cost and environmentally friendly NCs photovoltaic devices.

Highly sensitive detection for alkaline phosphatase using doped ZnS quantum dots with room temperature phosphorescence and its logic gate function

This paper presents a highly sensitive sensing system for alkaline phosphatase by room temperature phosphorescence of Mn doped ZnS quantum dots and pyrophosphate. The sensing system has intense room temperature phosphorescence emission in the absence of alkaline phosphatase. The phosphorescence is quenched gradually with the addition of alkaline phosphatase. The emission "on" without alkaline phosphatase may be attributed to the increased probability of charge transfer from one of surface traps to the dopant bands of another resulted from the shortened dot-to-dot distance by the strong chelation of pyrophosphate and Zn²⁺ ion and the hydrogen bonding between pyrophosphate and β-cyclodextrin. The addition of alkaline phosphatase causes pyrophosphate hydrolyzed to orthophosphate and the dot-to-dot distance of quantum dots back to the normal, and then the phosphorescence "off". The factors affecting the sensing system performance were also optimized. Under the optimal experimental conditions, the linear range for alkaline phosphatase is determined as 0.2-10 U/L with a LOD at 0.045 U/L. The recovery of human serum was determined from 93.75%-103.03%, indicating a potential application in biomedical diagnosis. Furthermore, an RTP-based "INHIBIT" logic gate using the doped ZnS quantum dots was also presented.

Hybrid Complexes of Photosensitizers with Luminescent Nanoparticles: Design of the Structure

Increasing the efficiency of the photodynamic action of the dyes used in photodynamic therapy is crucial in the field of modern biomedicine. There are two main approaches used to increase the efficiency of photosensitizers. The first one is targeted delivery to the object of photodynamic action, while the second one is increasing the absorption capacity of the molecule. Both approaches can be implemented by producing dye-nanoparticle conjugates. In this review, we focus on the features of the latter approach, when nanoparticles act as a light-harvesting agent and nonradiatively transfer the electronic excitation energy to a photosensitizer molecule. We will consider the hybrid photosensitizer-quantum dot complexes with energy transfer occurring according to the inductive-resonance mechanism as an example. The principle consisting in optimizing the design of hybrid complexes is proposed after an analysis of the published data; the parameters affecting the efficiency of energy transfer and the generation of reactive oxygen species in such systems are described.

Shape-Dependent Linear Dichroism Spectra of Colloidal Semiconductor Nanocrystals

Semiconductor nanocrystals are normally dispersed in the solvent for property studies as well as practical applications. However, rare attention has been paid to their orientation status in the colloidal solution. Herein, with the help of linear dichroism (LD) spectroscopy, we demonstrate that isotropic NCs of high symmetry (i.e., quantum dots, QDs) and anisotropic NCs (e.g., quantum rods, QRs and nanoplates, NPLs) but under diluted concentration are randomly dispersed without any preferential orientation. Meanwhile, anisotropic NCs under a high concentration can behave with some net orientation along a certain direction. For example, CdSe quantum rods (QRs) and nanoplatelets (NPLs) both show an obviously preferred orientation along the vertical direction in solution when their solution absorbances increase to certain values. An in-depth analysis of QRs' LD spectrum shows that the first excitonic transition of QRs is strongly quantumly confined while its higher-energy excitonic transitions are weakly quantumly confined. In contrast, the NPLs' LD spectrum indicates that their excitonic transitions are isotropic in the spatial space. This work provides a new viewpoint of the real status of anisotropic semiconductor NCs in solution.

Enhancing Carrier Diffusion Length and Quantum Efficiency through Photoinduced Charge Transfer in Layered Graphene-Semiconducting Quantum Dot Devices

Hybrid devices consisting of graphene or transition metal dichalcogenides (TMDs) and semiconductor quantum dots (QDs) were widely studied for potential photodetector and photovoltaic applications, while for photodetector applications, high internal quantum efficiency (IQE) is required for photovoltaic applications and enhanced carrier diffusion length is also desirable. Here, we reported the electrical measurements on hybrid field-effect optoelectronic devices consisting of compact QD monolayer at controlled separations from single-layer graphene, and the structure is characterized by high IQE and large enhancement of minority carrier diffusion length. While the IQE ranges from 10.2% to 18.2% depending on QD-graphene separation, d_s, the carrier diffusion length, L_D, estimated from scanning photocurrent microscopy (SPCM) measurements, could be enhanced by a factor of 5-8 as compared to that of pristine graphene. IQE and L_D could be tuned by varying back gate voltage and controlling the extent of charge separation from the proximal QD layer due to photoexcitation. The obtained IQE values were remarkably high, considering that only a single QD layer was used, and the parameters could be further enhanced in such devices significantly by stacking multiple layers of QDs. Our results could have significant implications for utilizing these hybrid devices as photodetectors and active photovoltaic materials with high efficiency.

Inorganic-Ligand Quantum Dots Meet Inorganic-Ligand Semiconductor Nanoplatelets: A Promising Fusion to Construct All-Inorganic Assembly

By the reaction of inorganic-ligand CdS/Cd²⁺ quantum dots (QDs) with inorganic-ligand CdSe/CdS/S^2- nanoplatelets (NPLs), semiconductor CdS QDs were fused with CdSe/CdS NPLs to yield all-inorganic assemblies, accompanied by great photoluminescence-enhancement. These all-inorganic assemblies facilitate charge transport between each other and open up interesting prospects with electronic and optoelectronic nanodevices.

Radiative lifetime-encoded unicolour security tags using perovskite nanocrystals

Traditional fluorescence-based tags, used for anticounterfeiting, rely on primitive pattern matching and visual identification; additional covert security features such as fluorescent lifetime or pattern masking are advantageous if fraud is to be deterred. Herein, we present an electrohydrodynamically printed unicolour multi-fluorescent-lifetime security tag system composed of lifetime-tunable lead-halide perovskite nanocrystals that can be deciphered with both existing time-correlated single-photon counting fluorescence-lifetime imaging microscopy and a novel time-of-flight prototype. We find that unicolour or matching emission wavelength materials can be prepared through cation-engineering with the partial substitution of formamidinium for ethylenediammonium to generate “hollow” formamidinium lead bromide perovskite nanocrystals; these materials can be successfully printed into fluorescence-lifetime-encoded-quick-read tags that are protected from conventional readers. Furthermore, we also demonstrate that a portable, cost-effective time-of-flight fluorescence-lifetime imaging prototype can also decipher these codes. A single comprehensive approach combining these innovations may be eventually deployed to protect both producers and consumers.

Designing effective covert security features is highly regarded to deter counterfeit of goods and currency in the global markets. Here, the authors present an electrohydrodynamically printed unicolour multifluorescent-lifetime security tag system based on perovskite to provide an alternative yet affordable solution.

Thermally Stable Quantum Rods, Covering Full Visible Range for Display and Lighting Application

Recently, quantum rods (QRs) have been studied heavily for display and lighting applications. QRs offer serious advantages over the quantum dots such as higher light out-coupling coefficient, and polarized emission. The QR enhancement films double liquid crystal display efficiency. However, it is still a challenge to synthesize good quality green (λ_em  ≈ 520 nm) and blue (λ_em  ≈ 465 nm) emitting QRs, due to very large bathochromic shift during the shell growth. Furthermore, until now, the presence of cadmium in high-quality QRs is inevitable, but due to its toxicity, RoHS has restricted the amount of cadmium in consumer products. In this article, low Cd core-shell QRs, with a narrow-band luminescence spectrum tuned in the whole visible range, are prepared by replacing Cd with Zn in a one-pot post-synthetic development. These QRs possess the good thermal stability of photoluminescence properties, and therefore, show high performance for the on-chip LED configuration. The designed white LEDs (WLEDs) are characterized by a high brightness of 120000 nits, and color gamut covering 122% NTSC (90% of BT2020), in the 1931CIE color space. Additionally, these LEDs show a high luminous efficiency of 115 lm W^-1 . Thus, these quantum rod LED are perfectly viable for display backlighting and lighting applications.

Physicochemical Understanding of Protein-Bound Quantum Dot-Based Sensitive Probing of Bilirubin: Validation with Real Samples and Implications of Protein Conformation in Sensing

Precise and rapid determination of free bilirubin (BR), a key biomarker of pathological conditions of the liver, is important clinical issue. The present study demonstrates that the combination of the strong specific affinic properties of protein, bovine serum albumin (BSA), toward bilirubin and luminescence of well-characterized semiconductor quantum dots (QDs) can offer a simple, fast, and sensitive technique for the determination of free bilirubin through quenching analysis. Here, BSA molecule not only stabilizes the quantum dots in an aqueous environment but also helps bring BR closer to QDs during the interactions of CdSe-BSA QDs with BR. Further, it is revealed through photophysical investigation that the conformation of protein molecule may play an important role in biomolecular sensing considering bilirubin as a model target molecule. The luminescence of CdSe-BSA QDs was highly responsive toward bilirubin, where nearly 90% of emission intensity was quenched on adding only 40 μM bilirubin, suggesting strong interactions involved between synthesized QDs and bilirubin. Solvent polarity dependence on luminescence changes confirms strong electrostatic interaction between the QDs and BR. The applicability of the synthesized quantum dots in sensing bilirubin has been checked in the presence of different possible interfering agents and also with plasma isolated from real blood samples of both normal and hepatitis patients. It was observed that bilirubin as control sample as well as in human serum sample can be optimally measured at pH 7.5, 25 °C. Thus, the proposed strategy being able to measure free BR even at least two orders of magnitude lower than bilirubin level in normal blood may provide a reasonable protocol to determine BR in the pathophysiology of many critical human diseases, like hepatitis and Gilbert's syndrome in the near future.

Nanomedicine and Early Cancer Diagnosis: Molecular Imaging using Fluorescence Nanoparticles

Incorporating nanotechnology into fluorescent imaging and magnetic resonance imaging (MRI) has shown promising potential for accurate diagnosis of cancer at an earlier stage than the conventional imaging modalities. Molecular imaging (MI) aims to quantitatively characterize, visualize, and measure the biological processes or living cells at molecular and genetic levels. MI modalities have been exploited in different applications including noninvasive determination and visualization of diseased tissues, cell trafficking visualization, early detection, treatment response monitoring, and in vivo visualization of living cells. High-affinity molecular probe and imaging modality to detect the probe are the two main requirements of MI. Recent advances in nanotechnology and allied modalities have facilitated the use of nanoparticles (NPs) as MI probes. Within the extensive group of NPs, fluorescent NPs play a prominent role in optical molecular imaging. The fluorescent NPs used in molecular and cellular imaging can be categorized into three main groups including quantum dots (QDs), upconversion, and dyedoped NPs. Fluorescent NPs have great potential in targeted theranostics including cancer imaging, immunoassay- based cells, proteins and bacteria detections, imaging-guided surgery, and therapy. Fluorescent NPs have shown promising potentials for drug and gene delivery, detection of the chromosomal abnormalities, labeling of DNA, and visualizing DNA replication dynamics. Multifunctional NPs have been successfully used in a single theranostic modality integrating diagnosis and therapy. The unique characteristics of multifunctional NPs make them potential theranostic agents that can be utilized concurrently for diagnosis and therapy. This review provides the state of the art of the applications of nanotechnologies in early cancer diagnosis focusing on fluorescent NPs, their synthesis methods, and perspectives in clinical theranostics.

Strong suppression of emission quenching in core quantum dots coupled to monolayer MoS2

Non-radiative processes like energy and charge transfer in 0D-2D semiconductor quantum dot (QD)-transition metal dichalcogenides (TMDs) and other two-dimensional layered materials, like graphene and analogs, leading to strong quenching of the photoluminescence (PL) of the usually highly emissive QDs, have been widely studied. Here we report control of the emission efficiency of core QDs placed in close proximity to the monolayers of MoS₂. The QDs are transferred in the form of a high-density compact monolayer with the dot-dot separation, δ as well as the MoS₂-QD separation, d, being controlled through chemical methods. While at larger separations we observe some quenching due to non-radiative processes, at smaller separations we observe enhanced emission from QDs on MoS₂ as compared to the reference despite the presence of significant non-radiative charge transfer. Interestingly, at small separations δ, we see evidence of strong dot-dot interactions and a significant red shift of QD PL which enhances spectral overlap with the B exciton of MoS₂. However, we observe significant reduction of PL quenching of QDs relative to longer δ and d cases, despite increased probability of non-radiative resonant energy transfer to MoS₂, due to the enhanced spectral overlap, as well as charge transfer. Significantly we observe that simultaneously the intensity of the B exciton of MoS₂ increases significantly suggesting the possibility of coherent and resonant radiative energy exchange between the 0D excitons in QDs and the 2D B exciton in MoS₂. Our study reveals interesting nanoscale light-matter interaction effects which can suppress quenching of QDs leading to potential applications of these nanoscale materials in light emitting and photonic devices.

Influence of Size and Shape Anisotropy on Optical Properties of CdSe Quantum Dots

We used low-temperature reactions to synthesize different-sized CdSe quantum dots (QDs) capped with fatty-acid and phosphine ligands. From the correlation of high-resolution transmission electron microscopy and X-ray diffraction (XRD) analyses of the synthesized QDs, we observed size-dependent shape anisotropy. In addition, the recorded XRD patterns revealed mixed crystal facets with zinc blende and wurtzite structures in small-sized QDs. Furthermore, from differential absorption (DA) spectra, we extracted the electronic transition energies for different-sized QDs, which were found to be similar to the calculated values of the quantum size levels associated with band mixing of CdSe QDs with a moderate bandgap. We found that the excitonic absorption peaks are increasingly “hidden” with decreasing QD size because of the crystal structure and crystalline quality. The results show good agreement with the obtained diffraction patterns and the estimation errors obtained from the DA spectra.

Laser-Generated Supranano Liquid Metal as Efficient Electron Mediator in Hybrid Perovskite Solar Cells

Creating colloids of liquid metal with tailored dimensions has been of technical significance in nano-electronics while a challenge remains for generating supranano (<10 nm) liquid metal to unravel the mystery of their unconventional functionalities. Present study pioneers the technology of pulsed laser irradiation in liquid from a solid target to liquid, and yields liquid ternary nano-alloys that are laborious to obtain via wet-chemistry synthesis. Herein, the significant role of the supranano liquid metal on mediating the electrons at the grain boundaries of perovskite films, which are of significance to influence the carriers recombination and hysteresis in perovskite solar cells, is revealed. Such embedding of supranano liquid metal in perovskite films leads to a cesium-based ternary perovskite solar cell with stabilized power output of 21.32% at maximum power point tracing. This study can pave a new way of synthesizing multinary supranano alloys for advanced optoelectronic applications.

Material and device engineering for high-performance blue quantum dot light-emitting diodes

Colloidal quantum dots (QDs) have attracted extensive attention due to their excellent optoelectronic properties, such as high quantum efficiency, narrow emission peaks, high color saturation, high stability and solution processability. Compared with the traditional display technology, QD based light-emitting diodes (QLEDs) show broad application prospects in the field of flat-panel displays and solid-state lighting. However, for full-color displays, the efficiency and lifetime of blue QLEDs are inferior to those of their green and red counterparts. Therefore, it is urgent for us to deeply understand the device physics and improve the performance of blue QLEDs through material and device engineering. An in-depth understanding of the optoelectronic properties (such as the structure of electronic states, electron-phonon interactions, Auger processes, etc.) and material engineering (such as size distribution control, composition control, and surface engineering) of blue emission QDs is greatly helpful for their applications in other fields. Herein, we review the key progress in the area of blue QLEDs, including the compositions and nanostructures of blue quantum dots, advances in the device architectures and the improvement of the device lifetime of blue QLEDs. The key factors that influence the blue device performance, including the nanostructure design and surface modification of QDs, interface engineering and architecture design of devices are discussed, aiming to propose possible solutions for these challenges, which will help to promote the commercialization process of QLEDs.

Improving the Quality and Luminescence Performance of All-Inorganic Perovskite Nanomaterials for Light-Emitting Devices by Surface Engineering

Lead halide perovskites and their applications in the optoelectronic field have garnered intensive interest over the years. Inorganic perovskites (IHP), though a novel class of material, are considered as one of the most promising optoelectronic materials. These materials are widely used in detectors, solar cells, and other devices, owing to their excellent charge-transport properties, high defect tolerance, composition- and size-dependent luminescence, narrow emission, and high photoluminescence quantum yield. In recent years, numerous encouraging achievements have been realized, especially in the research of CsPbX₃ (X = Cl, Br, I) nanocrystals (NCs) and surface engineering. Therefore, it is necessary to summarize the principles and effects of these surface engineering optimization methods. It is also important to scientifically guide the applications and promote the development of perovskites more efficiently. Herein, the principles of surface ligands are reviewed, and various surface treatment methods used in CsPbX₃ NCs as well as quantum-dot light-emitting diodes are presented. Finally, a brief outlook on CsPbX₃ NC surface engineering is offered, illustrating the present challenges and the direction in which future investigations are intended to obtain high-quality CsPbX₃ NCs that can be utilized in more applications.

Fabrication of amine functionalized CdSe@SiO2 nanoparticles as fluorescence nanosensor for highly selective and sensitive detection of picric acid

In this work, amino functionalized CdSe-silica core-shell nanoparticles (NH₂-CdSe@SiO₂ NPs) were constructed as probe to detect picric acid (PA). The CdSe QDs were embedded in SiO₂ nanoparticles and modified with amino groups on the surface. The nitro explosives are electron deficient in nature, which will have stronger affinity for amines and resulted in fluorescence quenching of quantum dots. It was proved that this strategy is selective, easy and sensitive enough for sensing PA with a detection limit of 0.5 × 10^-7 M.

Excitation Energy Dependence of Photoluminescence Quantum Yields in Semiconductor Nanomaterials with Varying Dimensionalities

The excitation energy dependence (EED) of the photoluminescence quantum yield (Φ_PL) of semiconductor nanoparticles with varying dimensionalities is reported. Specifically, the EEDs of CdSe quantum dots, CdSe quantum platelets, CdSe quantum belts, and CdTe quantum wires were determined via measurements of individual Φ_PL values and photoluminescence efficiency (PL_Eff(E)) spectra. There is a general trend of overall decreasing efficiency for radiative recombination with increasing excitation energy. In addition, there are often local minima in the PL_Eff(E) spectra that are most often at energies between quantum-confinement transitions. The average PL lifetimes of the samples do not depend on the excitation energy, suggesting that the EED of Φ_PL arises from charge carrier trapping that competes efficiently with intraband carrier relaxation to the band edge. The local minima in the PL_Eff(E) spectra are attributed to excitation into optically coupled states that results in the loss of carriers in the semiconductor. The EED data suggest that the PL_Eff(E) spectra depend on the sample synthesis, preparation, surface passivation, and environment.

Hyaluronic Acid-Based Theranostic Nanomedicines for Targeted Cancer Therapy

Hyaluronic acid (HA) is a natural mucopolysaccharide and has many useful advantages, including biocompatibility, non-immunogenicity, chemical versatility, non-toxicity, biodegradability, and high hydrophilicity. Numerous tumor cells overexpress several receptors that have a high binding affinity for HA, while these receptors are poorly expressed in normal body cells. HA-based drug delivery carriers can offer improved solubility and stability of anticancer drugs in biological environments and allow for the targeting of cancer treatments. Based on these benefits, HA has been widely investigated as a promising material for developing the advanced clinical cancer therapies in various formulations, including nanoparticles, micelles, liposomes, and hydrogels, combined with other materials. We describe various approaches and findings showing the feasibility of improvement in theragnosis probes through the application of HA.

The non-stationary case of the Maxwell-Garnett theory: growth of nanomaterials (2D gold flakes) in solution

The solution-based growth mechanism is a common process for nanomaterials. The Maxwell-Garnett theory (for light-matter interactions) describes the solution growth in an effective medium, homogenized by a mean electromagnetic field, which applies when materials are in a stationary phase. However, the charge transitions (inter- and intra-transitions) during the growth of nanomaterials lead to a non-stationary phase and are associated with time-dependent permittivity constant transitions (for nanomaterials). Therefore, time-independence in the standard Maxwell-Garnett theory is lost, resulting in time dependence, ε i(t). This becomes important when the optical spectrum of a solution needs to be deconvoluted at different reaction times since each peak represents a specific charge/energy transfer with a specific permittivity constant. Based on this, we developed a time-resolved deconvolution approach, f(t) ∝ ε i(t), which led us to identify the transitions (inter- and intra-transitions) with their dominated growth regimes. Two gold ion peaks were precisely measured (322 nm and 367 nm) for the inter-transition, and three different polyaniline oxidation states (PAOS) for the intra-transition, including A (372 nm), B (680 nm), and C (530 nm). In the initial reaction time regime (0-90 min), the permittivity constant of gold was found to be highly dependent on time, i.e. f E ∝ ε i(t), since charge transfer takes place from the PAOS to gold ions (i.e. inter-transition leads to a reduction reaction). In the second time regime (90-180 min), the permittivity constant of gold changes as the material deforms from 3D to 2D (f S ∝ ε 3D-2D), i.e. intra-transition (combined with thermal reduction). Our approach provides a new framework for the time-dependent modelling of (an)isotropic solutions of other nanomaterials and their syntheses.

Simultaneous regulation of optical properties and cellular behaviors of gold nanoclusters by pre-engineering the biotemplates

Upon pre-engineering the surface charged groups of biotemplates, both optical properties and cellular behaviors of fluorescent gold nanoclusters can be simultaneously modulated.